Related
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
flash stock rom using flash tool
Ronald Stefinson said:
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
Click to expand...
Click to collapse
use sp tool and flash coustom rom
raj1988 said:
use sp tool and flash coustom rom
Click to expand...
Click to collapse
Thanksfor taking time to respond.
The problem is im a little less able to be called a developer. I tried searching it but didnt got an original Rom, the one micromax uses. It would be very helpfull if u post a link. I'll manage to download sp flash tools on my own.
you get it from below link
Ronald Stefinson said:
Thanksfor taking time to respond.
The problem is im.
http://forum.xda-developers.com/canvas-4/general/micromax-canvas-4-a210-t2453846
go to this link an there you find blog link which have sp flash tool link
original stock rom
and how to flash it
good luck bro
Click to expand...
Click to collapse
raj1988 said:
Ronald Stefinson said:
Thanksfor taking time to respond.
The problem is im.
http://forum.xda-developers.com/canvas-4/general/micromax-canvas-4-a210-t2453846
go to this link an there you find blog link which have sp flash tool link
original stock rom
and how to flash it
good luck bro
Click to expand...
Click to collapse
downloaded the ROM and im Stuck where usb is not detected. i tried installing different drivers like pdanet, cynus t1 drivers. what should i do? its still searching.
Click to expand...
Click to collapse
try follows option
first you have done little research about the app
if you have cwm try to go to recovery and factory reset device and wipe data
but may be you didn't install than try this you say that canvas 4 logo seen hence may be you are able to get into recovey
press and hold vol up down and power keynow u see recovery mode and factory mode
press vol up key for go to recovery mode now see like this
use only vol up for scrolling and go to recovery mode then press vol downnow u see wipe reset menu hare
go to wipe/reset with vol key's5.to select use options keynow reset finish...............
try it and work for you than tell me
Ronald Stefinson said:
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
Click to expand...
Click to collapse
Open your device manager on your pc then plug the phone via USB. After a second or two I new device will pop up on the device manager but will only stay there for a few seconds, right when it appears right click on it and choose properties then drivers, then update driver then (at least on Windows 7) choose browse my computer and use wherever you put the driver files. That will install the driver.
Once the drivers are installed unplug the phone and open the Flash tool on the pc. Click scatter loading. And direct it to the Scatter file of the Rom. Then click download. now plug the phone back in and it should just flash it. When you get the green circle it's done.
---------- Post added at 01:09 PM ---------- Previous post was at 01:04 PM ----------
And no, it's not bricked. Mine did the same thing trying to use Chainfire 3D. If you follow the directions it will work. Oh yeah, the first time you turn it on it may not boot. Just hold the power button and restart again and once the boot screens come up you will see the android is updating apps and it will boot.
help I need help
hi everybody
things are going from bad to worst but i am not giving up.....so need U
as per your post even can can unbrick canvas4 ....
while using sp too; i used format ( to factory format)
now nothing happens ( pressing down Vol +/_ and power ) cant go into recovery
please help.....
will be great full ( have canvas 4 stock rom downloaded)........?
Great news
Hi guys and thanks to all those who advised me
There is good news for those who have hard bricked phone ( ie the phone don't even have a boot loader, cant start , nor recognized by PC, or go into recovery.... no red light when connected to charger) , i formated via sptool the bootloader and the phone was totally dead....
most said it not possible to revive it .....its in dead zone..... go to service center and change processor.
the new is for all local micromax , karbonn, spice (chinese brand) phone its simple and cost the least and the service is available for just Rs350/- ( $6/-), that to in under 10mins......
jtag service for just Rs1500/- to 2000/- ( $25 to 30/-) for branded phones
if anyone has problems ( bricking) specially in Goa please do post will direct you to the local guy center..
LESSON LEARNT>>>>>>>>>NEVER GIVE UP
CANVA 4 A210 / BLUE oNE
Hey m also facing a similar problem anyone plz help us. My phone is Micromax Canvas 3D. I had installed a custom rom it was working fine but suddenly I thought to factory reset it.......then oh no just the boot logo comes and the phone doesn't starts. I know its not bootloop. It is not even connecting to computer nor the recovery mode is opening... PLZ help if anyone can........
Shikhar122 said:
Hey m also facing a similar problem anyone plz help us. My phone is Micromax Canvas 3D. I had installed a custom rom it was working fine but suddenly I thought to factory reset it.......then oh no just the boot logo comes and the phone doesn't starts. I know its not bootloop. It is not even connecting to computer nor the recovery mode is opening... PLZ help if anyone can........
Click to expand...
Click to collapse
why not just flash the stock ROM using Sp flash tool
---------- Post added at 05:41 PM ---------- Previous post was at 05:34 PM ----------
Ronald Stefinson said:
raj1988 said:
downloaded the ROM and im Stuck where usb is not detected. i tried installing different drivers like pdanet, cynus t1 drivers. what should i do? its still searching.
Click to expand...
Click to collapse
manually install MTK65xx VCOM driver. see the video tutorial below for a guide
Click to expand...
Click to collapse
boot loop and no recovery Canvas a310 nitro (no forum for nitro)
I have rooted my Micromax Canvas Nitro A310 using Kingoroot and installed TWRP recovery before. Also I had installed a Custom ROM of Coolpad F1 from needrom<dot>com. There wasnt any problem till now except the auto rotation. Today i formated my sd card and switched off my phone and on reboot it came to boot loop. It is not booting the ROM and also the TWRP recovery. Shows only the first screen and goes off and on to the screen again. As it does not boot to recovery for me to wipe cache and dalvik, I tried to install drivers again to flash recovery using fastboot, but as its on a boot loop problem and its not standing by for me to install drivers, I am totally stuck. Please help me ASAP.
Sorry for the bad English.
Thank you
jjwaiting4u said:
Hi guys and thanks to all those who advised me
There is good news for those who have hard bricked phone ( ie the phone don't even have a boot loader, cant start , nor recognized by PC, or go into recovery.... no red light when connected to charger) , i formated via sptool the bootloader and the phone was totally dead....
most said it not possible to revive it .....its in dead zone..... go to service center and change processor.
the new is for all local micromax , karbonn, spice (chinese brand) phone its simple and cost the least and the service is available for just Rs350/- ( $6/-), that to in under 10mins......
jtag service for just Rs1500/- to 2000/- ( $25 to 30/-) for branded phones
if anyone has problems ( bricking) specially in Goa please do post will direct you to the local guy center..
LESSON LEARNT>>>>>>>>>NEVER GIVE UP
CANVA 4 A210 / BLUE oNE
Click to expand...
Click to collapse
I need a jtag centre to unbrick my Moto e. My location patna
Hallo everybody,
I have a question for you, I have a Zuk Z2 (not the pro version) I received this morning the notification for the update to ZUI 2.0.069 and, since I have unlocked bootloader and root, the official update failed, so I downloaded the update .zip file and I installed it from the recovery (TWRP).
The installation went fine but then after the reboot the phone is not turning on anymore.
I guess the phone is not completely off because the white LED is on but when I try to turn it on nothing happen, and if I press the power button for long time I see a black screen with the ZUK logo in the middle but only for a second and then the screen return black.
Also the device is not recognized by the computer.
Do you have any idea what went rong? do you know how to fiy it?
Thank you very much!
VMat21 said:
Hallo everybody,
I have a question for you, I have a Zuk Z2 (not the pro version) I received this morning the notification for the update to ZUI 2.0.069 and, since I have unlocked bootloader and root, the official update failed, so I downloaded the update .zip file and I installed it from the recovery (TWRP).
The installation went fine but then after the reboot the phone is not turning on anymore.
I guess the phone is not completely off because the white LED is on but when I try to turn it on nothing happen, and if I press the power button for long time I see a black screen with the ZUK logo in the middle but only for a second and then the screen return black.
Also the device is not recognized by the computer.
Do you have any idea what went rong? do you know how to fiy it?
Thank you very much!
Click to expand...
Click to collapse
You've bricked your phone, you can recover it with qpst tool. For instructions head over to zukfans.eu
Thank you for your answer.
Yes I was able to recover my phone thanks to the help of zukfans.eu guys, but not with qpst tool, now everything works properly.
Teo21 said:
but not with qpst tool
Click to expand...
Click to collapse
What did you used then? can you help us with the procces? If I ever brick my phone it would be a great help
PHRuiz said:
What did you used then? can you help us with the procces? If I ever brick my phone it would be a great help
Click to expand...
Click to collapse
So basically what I did was enter in fastboot mode and from there, using adb comand, I unlocked again the bootloader (I already ulnocked it before but the last update locked it again) and then I was able to reboot the phone succesfully.
During the soft brick of my device I was able to enter the recovery (pressing volume up + volume down + power button for almost two minutes) but in the recovery I was not able to wipe and flash a new room, so what really helped me was a tip from a guy in the zukfans.eu forum for enter fastboot directly using the phone buttons.
To do that you have first to completely turn off your phone (from the recovery for example) and then you have to press the buttons volume up and volume down at the same time and NOT the power button, at this point you connect the usb cable from the computer and your phone will enter fastboot mode.
Once in fastboot mode you can use adb comands for recover your phone.
I hope my explanation was clear and if you need I can send you the link to the dicussion at zukfans.eu.
VMat21 said:
So basically what I did was enter in fastboot mode and from there, using adb comand, I unlocked again the bootloader (I already ulnocked it before but the last update locked it again) and then I was able to reboot the phone succesfully.
During the soft brick of my device I was able to enter the recovery (pressing volume up + volume down + power button for almost two minutes) but in the recovery I was not able to wipe and flash a new room, so what really helped me was a tip from a guy in the zukfans.eu forum for enter fastboot directly using the phone buttons.
To do that you have first to completely turn off your phone (from the recovery for example) and then you have to press the buttons volume up and volume down at the same time and NOT the power button, at this point you connect the usb cable from the computer and your phone will enter fastboot mode.
Once in fastboot mode you can use adb comands for recover your phone.
I hope my explanation was clear and if you need I can send you the link to the dicussion at zukfans.eu.
Click to expand...
Click to collapse
If you can post the link of the dicussion at zukfans.eu can be very usefull thank you
Verolive said:
If you can post the link of the dicussion at zukfans.eu can be very usefull thank you
Click to expand...
Click to collapse
Sure, no problem, here is the link to the discussion:
http://zukfans.eu/community/threads/zui-2-0-069-released.87/page-3
I hope it will be helpful!
I bought the Zuk z2 (no Pro) on zukmobile.cc, i dont have received it yet, but they sent me this email:
Dear Customer, Sorry for disturbing you. We just got the latest news from factory that as the bug of the current OS, please do not update your firmware when you received the OS Update Remainder. We will release a formal update later, please kindly noticed. Any question, please contact us. Have a nice day! Lenovo ZUK Mobile
Hope i had helped =)
VMat21 said:
Sure, no problem, here is the link to the discussion:
http://zukfans.eu/community/threads/zui-2-0-069-released.87/page-3
I hope it will be helpful!
Click to expand...
Click to collapse
Hi...if you still have the update.zip, could you please updload it somewere? Do you know where to find rom in zip format for recovery?
i have the same problem with my phone i bricked it obviously and now no fastboot or edl mode or anything...... any ideas?
Slorks said:
i have the same problem with my phone i bricked it obviously and now no fastboot or edl mode or anything...... any ideas?
Click to expand...
Click to collapse
It will go to edl
Doesnt zuk logo comes or not
There is a buttom combinatoin to take it to edl mode
visit zukfans.eu for more info
can you help me to get into the fastboot mode using adb comand?
can you help me to get into the fastboot mode using adb comand?
VMat21 said:
So basically what I did was enter in fastboot mode and from there, using adb comand, I unlocked again the bootloader (I already ulnocked it before but the last update locked it again) and then I was able to reboot the phone succesfully.
During the soft brick of my device I was able to enter the recovery (pressing volume up + volume down + power button for almost two minutes) but in the recovery I was not able to wipe and flash a new room, so what really helped me was a tip from a guy in the zukfans.eu forum for enter fastboot directly using the phone buttons.
To do that you have first to completely turn off your phone (from the recovery for example) and then you have to press the buttons volume up and volume down at the same time and NOT the power button, at this point you connect the usb cable from the computer and your phone will enter fastboot mode.
Once in fastboot mode you can use adb comands for recover your phone.
I hope my explanation was clear and if you need I can send you the link to the dicussion at zukfans.eu.
Click to expand...
Click to collapse
To start your device in edl mode. Just press ans hold volume down button, then connect your usb cable.
Install qualcomm drivers and flash wigh qfil or xiaomi miflash tool.
Sent from my ZUK Z2121 using Tapatalk
I recently bought zuk 2 mobile and facing issue from the very first day.once screen locked after some time led notification light turns on ,further phone doesn't respond either through power button or through finger scanner and required to force reboot phone. I requested for replacement phone but my bad ,even new replaced phone also showing same issue.
Is that manufacturing issue since replaced phone also shows same issue.
Ronish said:
I recently bought zuk 2 mobile and facing issue from the very first day.once screen locked after some time led notification light turns on ,further phone doesn't respond either through power button or through finger scanner and required to force reboot phone. I requested for replacement phone but my bad ,even new replaced phone also showing same issue.
Is that manufacturing issue since replaced phone also shows same issue.
Click to expand...
Click to collapse
If you have i modded international rom, that might cause your problems. Use official zuk rom, if you want international flash cm13 or another one.
Sent from my ZUK Z2121 using Tapatalk
bricked zuk z2
hey guys and girls
I have a problem with Zuk Z2
The problem is that when the flash-in phone automatically disconnected and I have uploaded all the files you need.
The phone starts but before my eyes:
MAIN MENU:
-reboot
-install update package
-poweroff
When you select "install the update package," the message "system will now install update.zip root directory of the system partition in first ..."
Please help Someone may have a similar case? I know, I'm green: /
cukierunio/candyman said:
hey guys and girls
I have a problem with Zuk Z2
The problem is that when the flash-in phone automatically disconnected and I have uploaded all the files you need.
The phone starts but before my eyes:
MAIN MENU:
-reboot
-install update package
-poweroff
When you select "install the update package," the message "system will now install update.zip root directory of the system partition in first ..."
Please help Someone may have a similar case? I know, I'm green: /
Click to expand...
Click to collapse
I do not understand what you meant when you say " The problem is that ......... file you need"
It appears that when you boot your phone went to stock recovery mode instead of normal mode. If you can not boot it to normal you might need to flash the firmware.
Unroot
How to unroot Lenovo Z2 plus
Hi I had (in fact I still have) one zuk z2 plus 2131, bought by gearbest.
Stock rom installed, unloock bootloader, install TWRP ...
was fine, then I did something in engineering mode,
He went bootloop.
I tried to reinstall everything from TWRP, nothing to do ....
I tried then with QFIL (but I had not read that I need to lock the bootloader)
and it did not ...
I did it again bootloader block and reinstalled both QFIL that with MIFLASH but continues bootloop, can someone help me ....
I still can get into 9008 I would not even play me this opportunity
!^@R said:
How to unroot Lenovo Z2 plus
Click to expand...
Click to collapse
https://zukfans.eu/community/threads/zuk-z2-bootloader-unlock.62/
Hi,
My phone got a message about a virus which I assumed was a devious add, it wouldn't go away so I rebooted. It has gone into Mi-Recovery 3.0 and I cant get out. I've tried to connect to PC suite but it won't connect to my laptop
without debugging, which I can't do. I've wiped data but no good. Any ideas?
Flash full rom img via EDL mode and MiFlash software. Check out the official forums how to do it all.
For me the command fastboot oem edl works to get into edl mode.
pr0x2 said:
Flash full rom img via EDL mode and MiFlash software. Check out the official forums how to do it all.
For me the command fastboot oem edl works to get into edl mode.
Click to expand...
Click to collapse
Thank you for answering. I have downloaded a full rom and the MiFlash software. I have made an EDL cable but nothing happens. From what I read it says turn the phone off and connect the modified cable and it will enter EDL mode however it just stays on the Mi-Recovery 3.0 page. I've tried the command line you suggest but that can't find the phone. I've also tried the test point method and still can't get into edl mode. What am I doing wrong?
Sorry, I'm new to this so don't really know what I'm doing. Would you be able to give me some easy to follow advise or some links please.
Multi57 said:
Thank you for answering. I have downloaded a full rom and the MiFlash software. I have made an EDL cable but nothing happens. From what I read it says turn the phone off and connect the modified cable and it will enter EDL mode however it just stays on the Mi-Recovery 3.0 page. I've tried the command line you suggest but that can't find the phone. I've also tried the test point method and still can't get into edl mode. What am I doing wrong?
Sorry, I'm new to this so don't really know what I'm doing. Would you be able to give me some easy to follow advise or some links please.
Click to expand...
Click to collapse
You need your normal USB C cable. When you are in fastboot you need to type "fastboot oem edl" your screen will go to black and you are now in EDL mode. Now flash full img via miflash software.
pr0x2 said:
You need your normal USB C cable. When you are in fastboot you need to type "fastboot oem edl" your screen will go to black and you are now in EDL mode. Now flash full img via miflash software.
Click to expand...
Click to collapse
I cant get to fastboot as I'm stuck in Recovery. My only choices are Reboot to System and Back to Main Menu. When I'm in Main Menu my choices are Reboot, Wipe Data or Connect with MIAssistant.
Multi57 said:
I cant get to fastboot as I'm stuck in Recovery. My only choices are Reboot to System and Back to Main Menu. When I'm in Main Menu my choices are Reboot, Wipe Data or Connect with MIAssistant.
Click to expand...
Click to collapse
When you turn off the phone and press vol down + power what does that do?
It shows the Mi start screen then boots strait into recovery Main Menu. I can't turn the phone off without it rebooting.
Does anyone know how I can get around this? I've run out of things to try.
Did you try reflashing the recovery maybe that fixes it?
Sent from my MI 5s using Tapatalk
Can you explain how I do that? I can't connect to my computer so not sure what you mean. I'm new at this so unsure of the options.
Multi57 said:
Can you explain how I do that? I can't connect to my computer so not sure what you mean. I'm new at this so unsure of the options.
Click to expand...
Click to collapse
Oh hmm never mind. Ignore what I said above. I thought you had TWRP recovery but you've got the stock one.
Sent from my MI 5s using Tapatalk
templeka said:
Oh hmm never mind. Ignore what I said above. I thought you had TWRP recovery but you've got the stock one.
Sent from my MI 5s using Tapatalk
Click to expand...
Click to collapse
Is there no way of getting out of stock recovery?
Maybe your volume rocker buttons are faulty .
Happened with one of my friend his device was only booting into recovery mode on reboot because vol+ button was permanently stuck ?
Try to lift up the button if it is stuck or
press button repeatedly for sometime .
Ashish 289, you are right, it was a faulty volume rocker. Once disconnected it booted. Thanks.
Multi57 said:
Hi,
My phone got a message about a virus which I assumed was a devious add, it wouldn't go away so I rebooted. It has gone into Mi-Recovery 3.0 and I cant get out. I've tried to connect to PC suite but it won't connect to my laptop
without debugging, which I can't do. I've wiped data but no good. Any ideas?
Click to expand...
Click to collapse
now its my turn brother got my mi5 bricked in the same way .
it stays in mi recovery 3.0 always . if you tell me what you did after these steps not working ? could you do anything ?
need a solution man, please help .
thanks in advance.
So I bought a redmi note 5a(prime) from a local retailer nearby. I was careless and didnt check the phone.After opening the phone at my home , its not booting up at all and retailer says you bricked the mobile and its against warranty.I didnt even use it once.Please help if anything can be done. No repair shop has been able to fix the problem.Any help or information will be highly appreciated.
Shaurya9008 said:
So I bought a redmi note 5a(prime) from a local retailer nearby. I was careless and didnt check the phone.After opening the phone at my home , its not booting up at all and retailer says you bricked the mobile and its against warranty.I didnt even use it once.Please help if anything can be done. No repair shop has been able to fix the problem.Any help or information will be highly appreciated.
Click to expand...
Click to collapse
Have you try using edl method?
But at least can you access fastboot first, using power off + volume down
If you could, then it can boot into edl mode using tools provided from the internet, there are many of them
And flash fastboot firmware using MI flash or Qualcomm Flash Image Loader (QFIL)
voidGlyph said:
Have you try using edl method?
But at least can you access fastboot first, using power off + volume down
If you could, then it can boot into edl mode using tools provided from the internet, there are many of them
And flash fastboot firmware using MI flash or Qualcomm Flash Image Loader (QFIL)
Click to expand...
Click to collapse
No, I tried but nothing happens.I can't enter fastboot and nothing appears other than that logo. I think the device is completely bricked and I don't think I can fix this.Thanks for your time.
Shaurya9008 said:
No, I tried but nothing happens.I can't enter fastboot and nothing appears other than that logo. I think the device is completely bricked and I don't think I can fix this.Thanks for your time.
Click to expand...
Click to collapse
Because I have another xiaomi device before, and it also get into penguin logo, and I can assure that my device has no installed os too
But because most of xiaomi phone chipset is Qualcomm, and Qualcomm device has edl mode, to flash image
And sure with my bricked device (stuck in penguin logo), I still able to access edl mode
But it was my old phone, not Redmi Note 5A, and I'm searching for how to enter edl mode on Note 5A, the process is you must use test point inside the device
Other than that, I don't know though
But if for my old phone (Redmi 2 Prime) the procedure is press volume down, then insert USB cable that connected to pc, then I can start to flash using QFIL
voidGlyph said:
Have you try using edl method?
But at least can you access fastboot first, using power off + volume down
If you could, then it can boot into edl mode using tools provided from the internet, there are many of them
And flash fastboot firmware using MI flash or Qualcomm Flash Image Loader (QFIL)
Click to expand...
Click to collapse
you can reflash ROM by using EDL method which you have to shortcircuit some pins to enter EDL, it is pretty easy if you have the tools. After reflashing it, reboot and it should be okay.
nayefhaidir said:
you can reflash ROM by using EDL method which you have to shortcircuit some pins to enter EDL, it is pretty easy if you have the tools. After reflashing it, reboot and it should be okay.
Click to expand...
Click to collapse
Oh yeah I forgot about this too, this is the most useful one
I also saw some people do with test point
Because I don't have any experience to do that, so I didn't do, as it needs to crack open the phone
Hey guys,
I wanted to try out a custom rom, so I unlocked the bootloader of my phone and installed orange fox recovery successfully. Since I somehow uninstalled MIUI in the process of installing orange fox, I downloaded a .zip file containing a custom rom for my device (its called Cherish OS, but that shouldn't be the problem here). Since I wiped the whole internal storage of my phone, I used the "adb push" command to get the according file onto my Xiaomi Mi 11 Lite 5G NE. After installing the .zip file using orange fox, I pressed "reboot". However, my phone just shut down and did not reboot as it was supposed to do. I tried holding down the power button for at least 10 seconds to get it to boot, however the screen remained completely black. Even pressing volume down and power button did not help, the same with power up and power button. Whatever I tried, the screen remained black (no bootlogo etc).
I then charged up my phone, but that did not solve the issue either (before installation it had 47%, so I doubt that the battery died during installation as its a brand new phone).
One thing to notice is that my Windows PC makes a sound when I plug my phone into my Computer, as if I has plugged in a harddrive or something. But I can't get it to show up in the file explorer or with "fastboot devices". So clearly something happens when I turn on my phone, but the screen remains off.
I really hope you can help me to bring my (brandnew) phone back to life!
Thanks in advance.
P.S.: I used an ampmeter to check the charging current, its only around 60mA even though I used the official 33W charging brick.
another hard brick... you should have followed official instructions on how to flash the ROM...
PaperKing13 said:
another hard brick... you should have followed official instructions on how to flash the ROM...
Click to expand...
Click to collapse
So there is absolutely no way of getting it back to life? Can't I flash new firmware of something?
Edit: Okay, so I guess its in EDL mode now, any tips/tutorials on how to flash new firmware?
Lupus3141 said:
So there is absolutely no way of getting it back to life? Can't I flash new firmware of something?
Edit: Okay, so I guess its in EDL mode now, any tips/tutorials on how to flash new firmware?
Click to expand...
Click to collapse
Enter "Fastboot" mode and flash original Firmware from here https://xiaomifirmwareupdater.com/firmware/agate/ ! You can also use Miflash
4rch0 said:
Enter "Fastboot" mode and flash original Firmware from here https://xiaomifirmwareupdater.com/firmware/agate/ ! You can also use Miflash
Click to expand...
Click to collapse
Thank you for your reply, but unfortunately my phone is completely fried. I can't access fastboot mode. Any ideas how to fix this? As I have already mentioned, I guess its in EDL mode and to my knowledge only certified repair shops (or scammy internet advertisments) can resolve this issue.
Thanks in advance!
Lupus3141 said:
Thank you for your reply, but unfortunately my phone is completely fried. I can't access fastboot mode. Any ideas how to fix this? As I have already mentioned, I guess its in EDL mode and to my knowledge only certified repair shops (or scammy internet advertisments) can resolve this issue.
Thanks in advance!
Click to expand...
Click to collapse
How to Exit EDL Mode [Emergency Download Mode] in Android
In this comprehensive tutorial, we will show you the detailed steps to exit the EDL Mode (Emergency Download Mode) in Android
www.droidwin.com
4rch0 said:
How to Exit EDL Mode [Emergency Download Mode] in Android
In this comprehensive tutorial, we will show you the detailed steps to exit the EDL Mode (Emergency Download Mode) in Android
www.droidwin.com
Click to expand...
Click to collapse
[GUIDE] How to bypass authentication and flash in EDL with NO auth for FREE
Thanks to: chaosmaster / k4y0z: GitHub / XDA xyzz / xyz`: GitHub / XDA Dinolek: GitHub / XDA How to install: 1. Download the attached file: VD171_MTK-bypass.zip. 2. Extract the file and open the folder. 3. Run and install python...
forum.xda-developers.com
The tutorial seems to just work with Mediatek processors, however my phone uses Qualcom. Any other links?
Lupus3141 said:
So there is absolutely no way of getting it back to life? Can't I flash new firmware of something?
Edit: Okay, so I guess its in EDL mode now, any tips/tutorials on how to flash new firmware?
Click to expand...
Click to collapse
There's no tutorial unfortunately... You'll have to go to an Authorized Xiaomi Service Center.