Related
[Q] Firmware upgrade encountered an issue.Select recovery mode in Kies & try againn
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Just for giggles, plug your phone into Odin on that screen. If it recognizes it (blue com box lights up), use that screen as download mode. But, i would download your file again, making sure to get the one for the I747M.
Really?
mrhaley30705 said:
Just for giggles, plug your phone into Odin on that screen. If it recognizes it (blue com box lights up), use that screen as download mode. But, i would download your file again, making sure to get the one for the I747M.
Click to expand...
Click to collapse
Would that actually work cuz im stuck in the same situation... and i just got my tab today after repairs. and i dont wanna screw it up again cuz of parents so im just gonna give it a try to see if it works
Help
Has no one solved this issue yet? I just encountered it also I'm on t-mobile.
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
If you can get your device back into download mode, you could relay the stock firmware from www.stockbroker.net. Select the file you downloaded under pda in Odin and flash it. Hope this helps. You can try to root again from there.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Upgraded to 4.1.1 even after soft-brick !
Soft-brick aka " firmware upgrade encountered an issue " - screen in galaxy s3 sgh-i747 is a warning bell that somehow device might get interrupted while updating firmware , now i tried twice with old odin , and twice with new odin , what you got to do is just keep on trying and make sure that your galaxy s3 SGH-i747 drives are installed then after restart your pc , tried kies already , just waste of times , wasted 2 hours yet that official software didnt help me to upgrade or recover my device !
Finally i executed Odin 3.7 ( run as admin ) then --> ticked box : auto reboot , F. reset time ! upload that Firmware upgrade of Jelly bean in PDA section and wait till it gets loaded then press start ! ( i had to do this 3 times n then it worked , so dont lose the hope , keep trying over and over again ) and it will take 6~7 minutes as new OS is big around 1 GB ! so dont unplug device and ur done , then after completion , cellphone will restart with new settings and new OS !
---------- Post added at 03:14 AM ---------- Previous post was at 03:07 AM ----------
Dezzy87 said:
Has no one solved this issue yet? I just encountered it also I'm on t-mobile.
Click to expand...
Click to collapse
Read my general opinion in this thread , and find compatible ROM for T-mobile and it will work with new Odin 3.7 !
Has no one solved this issue yet?
I can't do anythiing with mi S3... not responding yet
macuruso said:
Has no one solved this issue yet?
I can't do anythiing with mi S3... not responding yet
Click to expand...
Click to collapse
can you get into download mode
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
i have the same error (firmware upgrade encountered an issue. please select recovery mode in kies and try again) on my Samsung Galaxy Tab 2 10.1 but i dont have this
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
I cant get my tablet in download or recovery, Kies doesnt recognise my tablet either? what do i do? please if someone has solved it plz plz plz tell me
Also when i plug my tablet into my PC i get "USB device not recognised" how do i fix that too?
akshar102 said:
Soft-brick aka " firmware upgrade encountered an issue " - screen in galaxy s3 sgh-i747 is a warning bell that somehow device might get interrupted while updating firmware , now i tried twice with old odin , and twice with new odin , what you got to do is just keep on trying and make sure that your galaxy s3 SGH-i747 drives are installed then after restart your pc , tried kies already , just waste of times , wasted 2 hours yet that official software didnt help me to upgrade or recover my device !
Finally i executed Odin 3.7 ( run as admin ) then --> ticked box : auto reboot , F. reset time ! upload that Firmware upgrade of Jelly bean in PDA section and wait till it gets loaded then press start ! ( i had to do this 3 times n then it worked , so dont lose the hope , keep trying over and over again ) and it will take 6~7 minutes as new OS is big around 1 GB ! so dont unplug device and ur done , then after completion , cellphone will restart with new settings and new OS !
---------- Post added at 03:14 AM ---------- Previous post was at 03:07 AM ----------
Read my general opinion in this thread , and find compatible ROM for T-mobile and it will work with new Odin 3.7 !
Click to expand...
Click to collapse
Im going to try this again and again I have the same screen on my verizon galaxy note 2 that I WAS trying to unlock for t mo and just went about it the wrong way. My screen says the same ol Firmware upgrade encountered an issue...... I CAN get into Odin to upload a firmware and IT DOES recognize the phone BUT no matter what firmware I try nothing works its stuck in the same mode. I think I have looked at all available videos and threads on this but nothing :crying: should I keep tryong to flash the rom or just give up? Any more help is appreciated thanks!
djcnote562 said:
Im going to try this again and again I have the same screen on my verizon galaxy note 2 that I WAS trying to unlock for t mo and just went about it the wrong way. My screen says the same ol Firmware upgrade encountered an issue...... I CAN get into Odin to upload a firmware and IT DOES recognize the phone BUT no matter what firmware I try nothing works its stuck in the same mode. I think I have looked at all available videos and threads on this but nothing :crying: should I keep tryong to flash the rom or just give up? Any more help is appreciated thanks!
Click to expand...
Click to collapse
This is for the S3, flashing it's firmware on the Note 2 won't work. I highly suggest you go on the Note 2 section.
I found a fix for this problem
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
1)Download this file www.mediafire.com/?bbfsnnub9gzg5wj
2)Go into download mode
3) connect your device to the computer and run ODIN as an administrator
4)Open the file and click start
5) Your phone should reboot
6) if your phone gets in a boot loop you need to download the latest firmware for your device
I hope this could help you, if the instructuions were unclear, send me a message and i will do my best to help you!
Re: [Q] Firmware upgrade encountered an issue.Select recovery mode in Kies & try agai
1)Download this file www.mediafire.com/?bbfsnnub9gzg5wj
2)Go into download mode
3) connect your device to the computer and run ODIN as an administrator
4)Open the file and click start
5) Your phone should reboot
6) if your phone gets in a boot loop you need to download the latest firmware for your device
I hope this could help you, if the instructuions were unclear, send me a message and i will do my best to help you!
Sent from my GT-P5113 using xda app-developers app
Download cwm-touch-i717-120414.tar.md5
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
ManUYSC said:
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
Click to expand...
Click to collapse
How any pages did you go back to find this thread? It literally has sat, answered and untouched for close to 2 months
it worked
man it worked used the error screen as download mode and it reflashed with even all my settings awesome .... thanks
use one of the $8 dongles. supersimple
cheers
ManUYSC said:
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
Click to expand...
Click to collapse
You are my hero! Ignore that little girl beneath your post, I'm glad you took the time to post the solution.
Ainol novo 8 discover flashing firmware error
Sir i have ainol novo 8 discover it has a problem that when i install firmware files on my discover with firmware tool there have a problem is data.img file cant install on my tblet software shows WRITE DATA PARTITION FAILED..and u can see screen shot also plzzzz help me what i do.plzz thanks in advance.
hi all,i used odin to flash my p600 device because it was on rom not on my region,i download a pda file from sammobile,when started the flashing the odin said starting connection and it took a little while and i didnt be patient and close the odin(because i have note2 which flash directly without saying start connection),then the device seem to be bricked,and said use kies...)))and i used kies and try to repair it from emergency firmware recover and kies not able to discover the device...please please please help me,:crying::crying::crying: iam very sad now>>>sorry 4 my bad english
samsung lo said:
hi all,i used odin to flash my p600 device because it was on rom not on my region,i download a pda file from sammobile,when started the flashing the odin said starting connection and it took a little while and i didnt be patient and close the odin(because i have note2 which flash directly without saying start connection),then the device seem to be bricked,and said use kies...)))and i used kies and try to repair it from emergency firmware recover and kies not able to discover the device...please please please help me,:crying::crying::crying: iam very sad now>>>sorry 4 my bad english
Click to expand...
Click to collapse
If you can still get into download mode, then the only option you have to recover back is flashing the same stock firmware that came with the device through odin.
So much for that... links are dead on that firmware page.
Dear XDA
I am facing a very serious problem with my Note 2 (Samsung) since noon today . Literary, I tried to reinstall (Jellybean 4.1.2) Firmware and unfortunately, during the process I had my PC off, which resulted in the following message;
"Firmware encountered an upgrade issue. Please Select Recovery mode in Kies and try again."
I tried Kies later, but It was not connecting , then reading few help blogs, I tried to install in mobile (cwm6-root-note2- with recovery zip inside) with the help of Odin, which has stopped the Firmware encountered message and replaced it with "Samsung Note II" logo and further its says updating package and restarts continually.
I also tried to install again official 4.1.2 Firmware through Odin after (Vol Down+Centre+Power - and Up) but Failed.
I dont know what to do , please help me out from this issue . it is killing me.
Thank you
suppose trongwi
You didnt saw this thread ? http://forum.xda-developers.com/showthread.php?t=2154890
check it out.
note2nooby said:
You didnt saw this thread ? http://forum.xda-developers.com/showthread.php?t=2154890
check it out.
Click to expand...
Click to collapse
Please it is a request , I need a precise method to overcome this problem ... some files in your suggested link doesnot work especially Hotfile.com
Thank you for reading
where can I download "Recovery Package/ROM"? Hotfile.com is not available anymore
Thank you
removed
simple google search gave me this , try to download!
Edit : i took the link off , because it could harm your phone if you are coming from 4.3 android
Ajmal khan
I faced the same problem few days back...
Start kies on ur laptop ( dont connect ur phone yet )
Choose initialisation option
Enter model number
Enter serial number
Now connect ur phone with pc in download mode
Pls make sure u have high speed net for 2-3 hrs...
Bcuz kies download the full rom as per ur serial number
Yes do as MAX says , because i suspect you installed 4.3 and now you want to come back to 4.1.2 ,
and i think it will not be so easy as it shows in the post i showed you.
note2nooby said:
Yes do as MAX says , because i suspect you installed 4.3 and now you want to come back to 4.1.2 ,
and i think it will not be so easy as it shows in the post i showed you.
Click to expand...
Click to collapse
No No and Honestly I didnt try that ... I just wanted to freshen my mobile by reinstalling official Firmware 4.1.2 .... oh anyways good news is that I recovered my mobile by following the bellow steps ..
1. Downloaded Official Firmware "N7100XXDMB5_N7100OJVDMB1_N7100XXDLK7_HOME.tar"
2. Opened Odin
3. and upload the "N7100XXDMB5_N7100OJVDMB1_N7100XXDLK7_HOME.tar" in PHONE section under PDA (Not PDA) & pressed Start
4. The installation went well but with problems in upgrading applications and continual restarting.
5. again opened Odin and this time I uploaded the official Firmware in PDA and installation went well
6. Booting and registeration also went well.
7. Mobile is back on life
But But
Now my colleague has messed with Note 3 and it also gives the same msg as i had in the beginning "firmware upgrade encountered an issue".
Thank you max621 for your kind help, I will try those for Note3 instead.
Thanks for reading.
ajmalkhan360 said:
Dear XDA
I am facing a very serious problem with my Note 2 (Samsung) since noon today . Literary, I tried to reinstall (Jellybean 4.1.2) Firmware and unfortunately, during the process I had my PC off, which resulted in the following message;
"Firmware encountered an upgrade issue. Please Select Recovery mode in Kies and try again."
I tried Kies later, but It was not connecting , then reading few help blogs, I tried to install in mobile (cwm6-root-note2- with recovery zip inside) with the help of Odin, which has stopped the Firmware encountered message and replaced it with "Samsung Note II" logo and further its says updating package and restarts continually.
I also tried to install again official 4.1.2 Firmware through Odin after (Vol Down+Centre+Power - and Up) but Failed.
I dont know what to do , please help me out from this issue . it is killing me.
Thank you
Click to expand...
Click to collapse
Try to Remove the battery and try to access the RECOVERY
the FIRMWARE was damaged.
I wish that you have nandroid backups there.
I already experienced that and just rebooted to recovery and restoring by nandroid.
Glad to see your phone is back up and running ...
next time you want refresh your phone , just do simple factory reset!
Glad to hear that u recovrr ur phone.. but for note3 u must install kies3 first....
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
can you still get to download mode?
if so just re-download the firmware and flash with odin
ermmanuel said:
can you still get to download mode?
if so just re-download the firmware and flash with odin
Click to expand...
Click to collapse
the message that said to conect via pc using kies it is downloada mode i tried going to odin again but odin cant detect
woahhh
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
ikhsaricky said:
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
Click to expand...
Click to collapse
can i have your pit file in your SM-T210?
As long as it can enter recovery mode and can be recognized, do a STOCK ROM FLASH (USE THE CLEAN METHOD OF FLASHING). Now attempt to do that flash again..
An image/screenshot of the problem might help us to help you.
aaronjasper49 said:
can i have your pit file in your SM-T210?
Click to expand...
Click to collapse
Aw, im using smt311, but flashing with odinnis the simole way,, did yiu finish it?
same thing happened to my t217s when Samsung didn't do anything for a legit issue with my tablet during an OTA update and stated that it was rooted (it has been stock since out of the box). after many attempts (didn't have another computer available) i switched to a different usb port and got it flashed just fine.
hi can i ask something it happened i flash samsung j1 then suddenly in 90percent was cut and i cant go back to download mode. and the phone turn black and cant connect to pc. Can Please can you help me?
I had a similar situation with a Galaxy SM-T113 here in Canada. I was hammering away at it for about 4 days with no luck. All i got was the "use Kies" to fix it message. Kies would not detect my phone though. Anyway what i did that worked was in part already tried earlier.. I already tried for example using a different cable and a different port. And i always got a failure with Odin and attempting the stock firmware flash.
So what did i do ?
I unplugged my Gamepad i keep plugged in 24/7 thinking maybe i had too many USB devices hogging USB port bandwidth.. maybe that was it I don't know.. I also uninstalled Kies but this time i said yes to installing the unified driver it asks you about. I also changed to yet another USB port.
It was working fine before hand.
I was trying to flash the firmware simply to reset the thing like i have done on countless other devices over the years.
I am not new to this sort of thing and was rather surprised to see Odin fail.
So who knows maybe my post here will help others.
I feel relieved i did not brick a perfectly good device. LOL
Hi mates,
a friend gave me his s4 galaxy mini lte gt-i9195 that is hard bricked.
it was all official, it's no rooted and with official rom 4.4.2 kitkat.
after an official update via ota, the phone start to go on bootloop, i can enter on download mode and recovery mode.
recovery mode is usless cause it says no data found. and when i try to wipe cache and data, it says "e footer is wrong e signature verification failed".
i've try to repair it from keis but nothing's happened.
also odin was useless for me, maybe cause i've usedd it in the wrong way.
someone can help me?
thank you, squall_17
If you use ODIN make sure you uninstall Kies and also disable firewall and antivirus. Don't uninstall drivers do if it asks you to. Also using Odin on anything above Windows 7 you may run into problems
ok thank you for the info, so i have to use odin and set to ap the firmware right?, i don't know the version of this phone, so can i use every firmware that i want?
Most if not all latest i9195 firmware should work. Try just stick to one for your country. And yes AP is where it goes. Good luck
Hi again guys,
for first, i want to say thanks to moderator to have moved my thread in the right section and say sorry for my error.
for second, i've tryed with a ita firmware 'cause i'm italian, odin say pass after the process finished, but nothing is changed, the only information that i could give is that on recovery mod there is this code on the left top: "kot49h.i9195xxucnk1".
I talk with my friend and he told me that he bought the phone online, and maybe from France.
Is there a way to install an ita rom?...or what can I do?
Thank you, Squall_17