pleaase help me i lost my deviice - Galaxy Note 10.1 (2014 Edition) Q&A, Help & Troubl

hi all,i used odin to flash my p600 device because it was on rom not on my region,i download a pda file from sammobile,when started the flashing the odin said starting connection and it took a little while and i didnt be patient and close the odin(because i have note2 which flash directly without saying start connection),then the device seem to be bricked,and said use kies...)))and i used kies and try to repair it from emergency firmware recover and kies not able to discover the device...please please please help me,:crying::crying::crying: iam very sad now>>>sorry 4 my bad english

samsung lo said:
hi all,i used odin to flash my p600 device because it was on rom not on my region,i download a pda file from sammobile,when started the flashing the odin said starting connection and it took a little while and i didnt be patient and close the odin(because i have note2 which flash directly without saying start connection),then the device seem to be bricked,and said use kies...)))and i used kies and try to repair it from emergency firmware recover and kies not able to discover the device...please please please help me,:crying::crying::crying: iam very sad now>>>sorry 4 my bad english
Click to expand...
Click to collapse
If you can still get into download mode, then the only option you have to recover back is flashing the same stock firmware that came with the device through odin.

So much for that... links are dead on that firmware page.

Related

[Q] Problem in Note 2 Boot + Firmware installation

Dear XDA
I am facing a very serious problem with my Note 2 (Samsung) since noon today . Literary, I tried to reinstall (Jellybean 4.1.2) Firmware and unfortunately, during the process I had my PC off, which resulted in the following message;
"Firmware encountered an upgrade issue. Please Select Recovery mode in Kies and try again."
I tried Kies later, but It was not connecting , then reading few help blogs, I tried to install in mobile (cwm6-root-note2- with recovery zip inside) with the help of Odin, which has stopped the Firmware encountered message and replaced it with "Samsung Note II" logo and further its says updating package and restarts continually.
I also tried to install again official 4.1.2 Firmware through Odin after (Vol Down+Centre+Power - and Up) but Failed.
I dont know what to do , please help me out from this issue . it is killing me.
Thank you
suppose trongwi
You didnt saw this thread ? http://forum.xda-developers.com/showthread.php?t=2154890
check it out.
note2nooby said:
You didnt saw this thread ? http://forum.xda-developers.com/showthread.php?t=2154890
check it out.
Click to expand...
Click to collapse
Please it is a request , I need a precise method to overcome this problem ... some files in your suggested link doesnot work especially Hotfile.com
Thank you for reading
where can I download "Recovery Package/ROM"? Hotfile.com is not available anymore
Thank you
removed
simple google search gave me this , try to download!
Edit : i took the link off , because it could harm your phone if you are coming from 4.3 android
Ajmal khan
I faced the same problem few days back...
Start kies on ur laptop ( dont connect ur phone yet )
Choose initialisation option
Enter model number
Enter serial number
Now connect ur phone with pc in download mode
Pls make sure u have high speed net for 2-3 hrs...
Bcuz kies download the full rom as per ur serial number
Yes do as MAX says , because i suspect you installed 4.3 and now you want to come back to 4.1.2 ,
and i think it will not be so easy as it shows in the post i showed you.
note2nooby said:
Yes do as MAX says , because i suspect you installed 4.3 and now you want to come back to 4.1.2 ,
and i think it will not be so easy as it shows in the post i showed you.
Click to expand...
Click to collapse
No No and Honestly I didnt try that ... I just wanted to freshen my mobile by reinstalling official Firmware 4.1.2 .... oh anyways good news is that I recovered my mobile by following the bellow steps ..
1. Downloaded Official Firmware "N7100XXDMB5_N7100OJVDMB1_N7100XXDLK7_HOME.tar"
2. Opened Odin
3. and upload the "N7100XXDMB5_N7100OJVDMB1_N7100XXDLK7_HOME.tar" in PHONE section under PDA (Not PDA) & pressed Start
4. The installation went well but with problems in upgrading applications and continual restarting.
5. again opened Odin and this time I uploaded the official Firmware in PDA and installation went well
6. Booting and registeration also went well.
7. Mobile is back on life
But But
Now my colleague has messed with Note 3 and it also gives the same msg as i had in the beginning "firmware upgrade encountered an issue".
Thank you max621 for your kind help, I will try those for Note3 instead.
Thanks for reading.
ajmalkhan360 said:
Dear XDA
I am facing a very serious problem with my Note 2 (Samsung) since noon today . Literary, I tried to reinstall (Jellybean 4.1.2) Firmware and unfortunately, during the process I had my PC off, which resulted in the following message;
"Firmware encountered an upgrade issue. Please Select Recovery mode in Kies and try again."
I tried Kies later, but It was not connecting , then reading few help blogs, I tried to install in mobile (cwm6-root-note2- with recovery zip inside) with the help of Odin, which has stopped the Firmware encountered message and replaced it with "Samsung Note II" logo and further its says updating package and restarts continually.
I also tried to install again official 4.1.2 Firmware through Odin after (Vol Down+Centre+Power - and Up) but Failed.
I dont know what to do , please help me out from this issue . it is killing me.
Thank you
Click to expand...
Click to collapse
Try to Remove the battery and try to access the RECOVERY
the FIRMWARE was damaged.
I wish that you have nandroid backups there.
I already experienced that and just rebooted to recovery and restoring by nandroid.
Glad to see your phone is back up and running ...
next time you want refresh your phone , just do simple factory reset!
Glad to hear that u recovrr ur phone.. but for note3 u must install kies3 first....

[HELP]Unfinished Firmware Flash Via Odin

hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
can you still get to download mode?
if so just re-download the firmware and flash with odin
ermmanuel said:
can you still get to download mode?
if so just re-download the firmware and flash with odin
Click to expand...
Click to collapse
the message that said to conect via pc using kies it is downloada mode i tried going to odin again but odin cant detect
woahhh
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
ikhsaricky said:
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
Click to expand...
Click to collapse
can i have your pit file in your SM-T210?
As long as it can enter recovery mode and can be recognized, do a STOCK ROM FLASH (USE THE CLEAN METHOD OF FLASHING). Now attempt to do that flash again..
An image/screenshot of the problem might help us to help you.
aaronjasper49 said:
can i have your pit file in your SM-T210?
Click to expand...
Click to collapse
Aw, im using smt311, but flashing with odinnis the simole way,, did yiu finish it?
same thing happened to my t217s when Samsung didn't do anything for a legit issue with my tablet during an OTA update and stated that it was rooted (it has been stock since out of the box). after many attempts (didn't have another computer available) i switched to a different usb port and got it flashed just fine.
hi can i ask something it happened i flash samsung j1 then suddenly in 90percent was cut and i cant go back to download mode. and the phone turn black and cant connect to pc. Can Please can you help me?
I had a similar situation with a Galaxy SM-T113 here in Canada. I was hammering away at it for about 4 days with no luck. All i got was the "use Kies" to fix it message. Kies would not detect my phone though. Anyway what i did that worked was in part already tried earlier.. I already tried for example using a different cable and a different port. And i always got a failure with Odin and attempting the stock firmware flash.
So what did i do ?
I unplugged my Gamepad i keep plugged in 24/7 thinking maybe i had too many USB devices hogging USB port bandwidth.. maybe that was it I don't know.. I also uninstalled Kies but this time i said yes to installing the unified driver it asks you about. I also changed to yet another USB port.
It was working fine before hand.
I was trying to flash the firmware simply to reset the thing like i have done on countless other devices over the years.
I am not new to this sort of thing and was rather surprised to see Odin fail.
So who knows maybe my post here will help others.
I feel relieved i did not brick a perfectly good device. LOL

need HELP with "firmware upgrade encountered an issue"

Hello fellow community!
On first place i want to excuse myself for my bad English!!
I have soft bricked T-Mobile (USA) Samsung Galaxy S4 and everything i found in the web DIDN'T help me to recover my phone...
Here is my history for what i did to bring this condition of my phone.
I was on Original T-Mobile 4.4.2 Stock ROM working normal without any issues. But 2 or 3 months ago i was curious about installing on my phone CUSTOM " CYANOGENmod" rom 5.x.x NIGHTY edition. At all installing on that custom ROM was without problems and phone for this 2~3 months works flawlessly "normal"... all this time i updates every day this custom theme and I'm understand this is NIGHTY but at the end i was kind tired from this NOT exactly real and fully functioned replica of custom ROM and get decision to restore my ORIGINAL status of the phone and put latest (4.4.4) Stock ROM. 1st i download 4.4.4 ROM "M919UVUFNK2_M919TMBFNK2_M919UVUFNK2_HOME.tar.md5" for my T-Mobile phone. I put in in DOWNLOAD mode. Connect phone to my computer.. and Start ODIN3 v3.10.6 ( didn't install Samsung drivers because i already have installed them !! ). In AP i put latest ROM... checked was ONLY options Auto Reboot and F. Reset Time ... NO Re-Partition was checked or pit file wasn't given !! Jus i hit the SATRT and receive that !...
everything was fine till the end !!! Flashing stops on try to flash hidden.img.ext4 with error and FAIL all process !!!
I CANT understand where is my problem and what i can do to flash my phone normally?
Please community help me to solve this problem..
1 year ago i have almost the same problem but with the same error "firmware upgrade encountered an issue" and remember here on XDA DEVELOPERS i read the guide how to recovery phone after that but TBH i cant find this guide now with all my searching attempts..
Please for HELP!
and Thank you in Advance for your support!!..
Cheers!
Not 100% sure but you needed to do a factory reset before flashing stock firmware.
You can't flash kitkat over lollipop before doing factory reset because they are two different firmwares.
Try doing a factory reset and flashing again, if it fails pull battery, replace battery and go straight into download mode, connect to pc and flash again with odin.
Sometimes the double flash can be successful.
Good luck.
Pp.
thank you for replay!! but I [SOLVED] my problems!!!
iceBringer said:
thank you for replay!! but I [SOLVED] my problems!!!
Click to expand...
Click to collapse
Would be nice if you could share your solution for others that may have the same problem

Galaxy S4 mini hard brick no root

Hi mates,
a friend gave me his s4 galaxy mini lte gt-i9195 that is hard bricked.
it was all official, it's no rooted and with official rom 4.4.2 kitkat.
after an official update via ota, the phone start to go on bootloop, i can enter on download mode and recovery mode.
recovery mode is usless cause it says no data found. and when i try to wipe cache and data, it says "e footer is wrong e signature verification failed".
i've try to repair it from keis but nothing's happened.
also odin was useless for me, maybe cause i've usedd it in the wrong way.
someone can help me?
thank you, squall_17
If you use ODIN make sure you uninstall Kies and also disable firewall and antivirus. Don't uninstall drivers do if it asks you to. Also using Odin on anything above Windows 7 you may run into problems
ok thank you for the info, so i have to use odin and set to ap the firmware right?, i don't know the version of this phone, so can i use every firmware that i want?
Most if not all latest i9195 firmware should work. Try just stick to one for your country. And yes AP is where it goes. Good luck
Hi again guys,
for first, i want to say thanks to moderator to have moved my thread in the right section and say sorry for my error.
for second, i've tryed with a ita firmware 'cause i'm italian, odin say pass after the process finished, but nothing is changed, the only information that i could give is that on recovery mod there is this code on the left top: "kot49h.i9195xxucnk1".
I talk with my friend and he told me that he bought the phone online, and maybe from France.
Is there a way to install an ita rom?...or what can I do?
Thank you, Squall_17

Samsung SGH-T999 bricked due to wrong CF-auto-root.tar file

Hello dear,
this is my first post, so please spare my little knowledge,
the problem is i have a T-mobile Samsung S-III SGH-T999 which was working fine, one day it stop booting and stuck on
Samsung galaxy logo. I have to recover my files. so i try to root the same from a thread on xdadeelopers
i end up to a state in odin mode and a triangle saying "Firmware upgrade encountered an issue. please select recovery mode in
Kies & try again."
i think what i did wrong is that i used a wrong CF-Auto-Root.tar file which was for SGH-T999V-4.4.2
whereas i have SGH-T999 on 4.3 OS.
now i can only go to download mode but when i try to write something with odin it stuck on initialization
kies did not detect any thing but keep on searching the device.
can someone help me!....................
Thanks in anticipation.
mahtabkhan27 said:
Hello dear,
this is my first post, so please spare my little knowledge,
the problem is i have a T-mobile Samsung S-III SGH-T999 which was working fine, one day it stop booting and stuck on
Samsung galaxy logo. I have to recover my files. so i try to root the same from a thread on xdadeelopers
i end up to a state in odin mode and a triangle saying "Firmware upgrade encountered an issue. please select recovery mode in
Kies & try again."
i think what i did wrong is that i used a wrong CF-Auto-Root.tar file which was for SGH-T999V-4.4.2
whereas i have SGH-T999 on 4.3 OS.
now i can only go to download mode but when i try to write something with odin it stuck on initialization
kies did not detect any thing but keep on searching the device.
can someone help me!....................
Thanks in anticipation.
Click to expand...
Click to collapse
any help?.........

Categories

Resources