I need support for large (10+GB) files, but can't get exFAT or ext2/4 formatted sdcards working on my P8000.
I generally prefer to use exFAT for mac/windows/linux interoperability, but I guess the default kernel has no support for it. Ext2/4 gives the error 'Damaged SD card' and reformats with FAT32.
Any way to currently do this? Am I missing something obvious?
need to write module (exFAT or NTFS) for kernel
I also asked this question, no one helped
no program does not work, I tried everything
Bummer. I was afraid of that.
Thanks for the info.
I have my sdcard as two partitions, a FAT32 partition visible to the phone and an EXT4 partition to use link2sd for moving apps from the phone memory which is not visible to the phone. I am not sure whether there is an application that lets you use files as you wish to by saving to the EXT4 partition.
ShootistUK said:
I have my sdcard as two partitions, a FAT32 partition visible to the phone and an EXT4 partition to use link2sd for moving apps from the phone memory which is not visible to the phone. I am not sure whether there is an application that lets you use files as you wish to by saving to the EXT4 partition.
Click to expand...
Click to collapse
Did the same two partitions on my sdcard. FAT32 and EXT4 both are working. The P8000 is able to handle EXT4 partitions but i don't now, how big these partitions can be.
Perhaps in Android 6 add this
Of course it is still not known
so does ext4 and fat32 work with link2sd?
gnomified said:
so does ext4 and fat32 work with link2sd?
Click to expand...
Click to collapse
Fat32+ext4 works, and link2sd can be used. Ended up going that route, myself.
Ended up going that route, myself.
Click to expand...
Click to collapse
fine if it suits you
not suitable for me
Write to developers do support for the NTFS or exFAT, received a reply
Thanks for your letter and suggestions for Elephone. I will sort out your ideas and report it to my colleague. Maybe it will appear on our phone in the near future.
Click to expand...
Click to collapse
doubt that it will
64gb
my phone can't recognize my fat32 64gb sdcard :crying:
jasux said:
my phone can't recognize my fat32 64gb sdcard :crying:
Click to expand...
Click to collapse
The slot seems to be very sensitive.
I've need to try it several times, to insert the card "correctly".
So don't give up...remove the card and insert it again...try reboots and so on...
http://forum.xda-developers.com/ele...rys-kernel-t3226081/post63443302#post63443302
Here's my first experimental exFAT kernel build. I'm obviously not responsible for any damage.
Zormal said:
I need support for large (10+GB) files, but can't get exFAT or ext2/4 formatted sdcards working on my P8000.
I generally prefer to use exFAT for mac/windows/linux interoperability, but I guess the default kernel has no support for it. Ext2/4 gives the error 'Damaged SD card' and reformats with FAT32.
Any way to currently do this? Am I missing something obvious?
Click to expand...
Click to collapse
try my patch
Related
Hi sorry if this has been answered but couldnt find it.
i recently purchased a a bigger size micro sd card for my htc desire. The phone will not turn on with the card in, nor can i format it in the recovery memory. Can someone tell me what i need to format it as on computer. GPT MBR, FAT 32. etc etc. Thank you
I used Gparted in Linux to set up the standard layout:
- 32MB SWAP
- 512MB EXT2
- Rest FAT32
You can download a livecd of Gparted, or use "Partition SD Card" within ROM Manager.
You can download GParted for Windows aswell. Google it.
Or you can flash amon ra recovery and use that to partition within the recovery.
Also rom manager allows you to partition the card as well. I personally use 0mb for swap and 768mb for ext3. Do note rom manager only allows you to use an ext partition no bigger then 512mb. I assume it only formats it in ext2. My opinion is amon ra recovery is the way to go. Use version r5 as the latest is quite buggy according to other users. Or you can use gparted as mentioned earlier.
Misunderstood your post, use gparted. I didnt read that you cant turn on the phone with the card in it.
swap is not needed
Have you got / can you borrow a card reader for your PC, you can partition it from there
(Whys this under android dev?)
Sent from my HTC Desire using XDA App
schiznik said:
Have you got / can you borrow a card reader for your PC, you can partition it from there
(Whys this under android dev?)
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Report the thread.
It's already been done.
Can't hurt, though.
I'm also having a little problem with the partitions...
I have a 32gb card, but when i remove it from the card reader after making the partitions (or after disconnecting the phone from the computer) the only partition remaining is the FAT32...ext and swap become unloccated space :s
how can i fix this?
feelmyanger said:
I'm also having a little problem with the partitions...
I have a 32gb card, but when i remove it from the card reader after making the partitions (or after disconnecting the phone from the computer) the only partition remaining is the FAT32...ext and swap become unloccated space :s
how can i fix this?
Click to expand...
Click to collapse
You do realize that you can't use the SWAP and EXT partitions as drive-space, right?
feelmyanger said:
I'm also having a little problem with the partitions...
I have a 32gb card, but when i remove it from the card reader after making the partitions (or after disconnecting the phone from the computer) the only partition remaining is the FAT32...ext and swap become unloccated space :s
how can i fix this?
Click to expand...
Click to collapse
they are not accessable within windows
i know, i used gparted. but when i remove the sd card/disconnect the phone from usb mode the partitions are gone :|
zHk3R said:
You do realize that you can't use the SWAP and EXT partitions as drive-space, right?
Click to expand...
Click to collapse
yes, but i'm not talking about the space...the entire partition itself dissapears. for example, if i'm going to flash a rom that need an ext partition it won't flash...the ext partition is gone
one question,
should the ext partition be in the front or at the back of the FAT32 partition?
or it doesn't matter?
I have tested this a couple times. If I have a second partition, FAT32 ext4 or unformated, the phone will say there is no SD card. As soon as I delete the second partition the phone recognizes the SD card and I can access the data I had previously stored on it. What the hell is going on? I want to use Link2SD and that is why I'm trying to make a second partition.
are you doing that with a card reader?
i think the easiest way to make partition on your sd card are with CWM,simple+easy and fast,,,sorry for my bad english
vipul955 said:
are you doing that with a card reader?
Click to expand...
Click to collapse
Yes
ZETREK said:
i think the easiest way to make partition on your sd card are with CWM,simple+easy and fast,,,sorry for my bad english
Click to expand...
Click to collapse
Can you please explain the steps? I searched CWM in the app store but nothing with it's exact name was there. For example x-Parts says it will install CWM into the system so do I actually install x-Parts? Then do what?
use minitool partition program and remeber is the partitions are both FAT, format one as promary and the latter as secondary, if the second one is ext2-3-4 label both as primary, always set cluster values as default
Dr.SAM88 said:
use minitool partition program and remeber is the partitions are both FAT, format one as promary and the latter as secondary, if the second one is ext2-3-4 label both as primary, always set cluster values as default
Click to expand...
Click to collapse
That's what I've been using and it doesn't work as soon as I make the second partition.
Silly me, I wasn't making the second partition primary. Why must it be primary and how is it possible to have two primary partitions?
Hey everyone. I'm going nuts trying to figure out how to use Link2SD. I partitioned my 32G SD card using Mini Partition Tool. I made a 1 gig partition. I've tried FAT32 and EXT2. After partitioning, i rebooted and tried Link2SD. I keep getting the error "Mount script cannot be created. [1] Segmentation fault mount ..."
Is there any solution for the xperia play? I manually moved my apps but still ran out of space keeping system tools like Titanium Backup on the internal. Maybe I should make them System Apps?
I use the following on mine setup:
64gb Card (Fat32 - Primary)
5GB for EXT4 partition (Make sure when you partition it to set it as primary.)
300mb Swap Partition
I had an issue with Link2SD too ad it was because I was not setting the EXT partition as primary, oncei formatted it again as primary Link2SD had not issue with it. Try that.
ozzmanj1 said:
I use the following on mine setup:
64gb Card (Fat32 - Primary)
5GB for EXT4 partition (Make sure when you partition it to set it as primary.)
300mb Swap Partition
I had an issue with Link2SD too ad it was because I was not setting the EXT partition as primary, oncei formatted it again as primary Link2SD had not issue with it. Try that.
Click to expand...
Click to collapse
Hey thanks for the reply. Just tried what you said. My FAT32, ext4, and Swap are all Primary and sill no go. I get the same error (segmentation fault mount -t ext4...). When Link2SD opens I've tried selecting all the options for the parition type too and none of them work.
Anything else I can try? Does the order of the partitions make any difference? Right now I am Primary, ext4, Swap.
echardcore said:
Hey thanks for the reply. Just tried what you said. My FAT32, ext4, and Swap are all Primary and sill no go. I get the same error. When Link2SD opens I've tried selecting all the options for the parition type too and none of them work.
Anything else I can try? Does the order of the partitions make any difference? Right now I am Primary, ext4, Swap.
Click to expand...
Click to collapse
Ah.... okay, I should have clarified this, only the fat32 and EXT partition are set to Primary. Swap Partition is set to logical, setting all three to primary causes issues.
Reformat only the swap and format to logical. Then in Link2SD force it to reinstall the scripting and see if that fixes it.
ozzmanj1 said:
Ah.... okay, I should have clarified this, only the fat32 and EXT partition are set to Primary. Swap Partition is set to logical, setting all three to primary causes issues.
Reformat only the swap and format to logical. Then in Link2SD force it to reinstall the scripting and see if that fixes it.
Click to expand...
Click to collapse
Okay then. New problem. Now Link2SD says "No SD card present" and android doesn't mount it either.
This is killing me slowly.
I'll try to reformat the whole card via a reader...
Didnt work. SD card still not recognized.
echardcore said:
Okay then. New problem. Now Link2SD says "No SD card present" and android doesn't mount it either.
This is killing me slowly.
I'll try to reformat the whole card via a reader...
Didnt work. SD card still not recognized.
Click to expand...
Click to collapse
OK. If your willing, lets start fresh. I am guessing you have your SDcard files backed up. Using Minitool partition delete all partitions and format as FAT32. Then create another partition of your size and format it as EXT (I prefer 4, EXT4) and set it to EXT(2,3,4,etc) and Primary. Then just for kicks, do not make a swap partition. I read that its not necessary, however I always do it..... well necessary only if you use a swap manager. So after the fat32 and ext partitions are made and minitool has created them. Take out the card, put it back into your pc and see if windows sees the fat32 partition. If good place it back into your phone and see if it upon bootup sees your sdcard.
Just in case as a reference here is the tutorial from the developer of Link2SD on how to set it up.
http://www.link2sd.info/description
ozzmanj1 said:
OK. If your willing, lets start fresh. I am guessing you have your SDcard files backed up. Using Minitool partition delete all partitions and format as FAT32. Then create another partition of your size and format it as EXT (I prefer 4, EXT4) and set it to EXT(2,3,4,etc) and Primary. Then just for kicks, do not make a swap partition. I read that its not necessary, however I always do it..... well necessary only if you use a swap manager. So after the fat32 and ext partitions are made and minitool has created them. Take out the card, put it back into your pc and see if windows sees the fat32 partition. If good place it back into your phone and see if it upon bootup sees your sdcard.
Just in case as a reference here is the tutorial from the developer of Link2SD on how to set it up.
http://www.link2sd.info/description
Click to expand...
Click to collapse
PC sees the FAT32. Phone sees the card now. Link2SD shows the partition but cant mount it and create the script for it. Also tried as ext2. Thanks for your help. I am going to try to update the ROM.
After updating the ROM to 2.4.0 and waiting 10 mins and rebooting as usual. was able to successfully link the partition! Thanks for your help!
No problem. Glad you got it working.
Sent from my R800at using xda premium
Got all my apps installed! Woot! Also, something must have been messed up with my previous flash.. I wasn't able to restore apps the newer way from titanium backup. I had to do it the old way one by one.
phone is going to make a great gaming alternative to my SGSII.
Hello bros, i just want advice on partitioning. i have a 8 gb SD card and i want to do 3 partitions. one for swap (ram) one for internal (move fixed apps like facebook to sd) and the last one for my normal use pics, music etc. i just want to know that is this possible ?
talalz94 said:
Hello bros, i just want advice on partitioning. i have a 8 gb SD card and i want to do 3 partitions. one for swap (ram) one for internal (move fixed apps like facebook to sd) and the last one for my normal use pics, music etc. i just want to know that is this possible ?
Click to expand...
Click to collapse
Easiest way to partition SD card (at least for me) is with twrp recovery: http://techerrata.com/file/twrp2/primou/openrecovery-twrp-2.6.3.0-primou.img
You find "Partition SD" under Advanced
However:
- for swap use Turbo Boost: http://forum.xda-developers.com/showthread.php?t=2145133 or SwapItOn: http://forum.xda-developers.com/showthread.php?t=2359182 - so you don't need a partition for swap :highfive:
- best (and fastest) is to leave all apps where they are. Specially if you still have free space. If you're running out of space, OK, move some to SD. Read here: http://forums.androidcentral.com/sa...all-apps-internal-memory-external-memory.html and http://forums.androidcentral.com/ge...r-store-my-apps-my-phones-memory-sd-card.html - so, actually, you don't need that partition too :highfive:
bratusm said:
Easiest way to partition SD card (at least for me) is with twrp recovery: http://techerrata.com/file/twrp2/primou/openrecovery-twrp-2.6.3.0-primou.img
You find "Partition SD" under Advanced
However:
- for swap use Turbo Boost: http://forum.xda-developers.com/showthread.php?t=2145133 or SwapItOn: http://forum.xda-developers.com/showthread.php?t=2359182 - so you don't need a partition for swap :highfive:
- best (and fastest) is to leave all apps where they are. Specially if you still have free space. If you're running out of space, OK, move some to SD. Read here: http://forums.androidcentral.com/sa...all-apps-internal-memory-external-memory.html and http://forums.androidcentral.com/ge...r-store-my-apps-my-phones-memory-sd-card.html - so, actually, you don't need that partition too :highfive:
Click to expand...
Click to collapse
alright thanks bro.
so heres what i have decided, i will make partition on sd (for some big apps like games cuz internal is only 800 mb to begin with) using TWRP ...
and use the turbo mod to increase ram (it expands on internal right ?)
what do you say ?
talalz94 said:
alright thanks bro.
so heres what i have decided, i will make partition on sd (for some big apps like games cuz internal is only 800 mb to begin with) using TWRP ...
and use the turbo mod to increase ram (it expands on internal right ?)
what do you say ?
Click to expand...
Click to collapse
Well, I would say, go ahead and try...
If you don't like it, you can uninstall it, change it and do whatever you like... :fingers-crossed:
bratusm said:
Well, I would say, go ahead and try...
If you don't like it, you can uninstall it, change it and do whatever you like... :fingers-crossed:
Click to expand...
Click to collapse
hey so partition did not worked.
first i tried the twrp recovery method and it showed partition failed several times
then i tried mini tool partition from pc through sd card reader. i could create the first partition the one with out problem. but when attempted the second partition for my internal storaga, it said windows do not support the second partition, i continued never the less but again when i opened link2sd, it did not read my second (ext2) partition instead it read my main one fat32 and it said that it could not link my sd with ext2/3/4 only fat 32 .... any idea whats happening ? and i could not get turbo boost mod, instructions arent clear enough ..
does it have something to do with my custom rom/ kernel ?
talalz94 said:
hey so partition did not worked.
first i tried the twrp recovery method and it showed partition failed several times
then i tried mini tool partition from pc through sd card reader. i could create the first partition the one with out problem. but when attempted the second partition for my internal storaga, it said windows do not support the second partition, i continued never the less but again when i opened link2sd, it did not read my second (ext2) partition instead it read my main one fat32 and it said that it could not link my sd with ext2/3/4 only fat 32 .... any idea whats happening ? and i could not get turbo boost mod, instructions arent clear enough ..
does it have something to do with my custom rom/ kernel ?
Click to expand...
Click to collapse
Well, like it said on Link2SD app description: You should have two partitions on SD card and both should be primary.
The first FAT partition is your standard SD card storage. The second partition is used for application files and can be ext2, ext3, ext4 or FAT32.
Some phones lack the ext2, ext3 or ext4 file system support and you may get mount errors like "no such device", "invalid argument". These phones need ext2.ko or ext3.ko modules and even some additional modules to be able to mount. Using FAT32 on the second partition will eleminate such problems, because FAT32 is supported on all phones.
Try partitioning on pc using: http://www.easeus.com/partition-manager/ or http://www.partitionwizard.com/free-partition-manager.html or some other program, just make partition FAT32
Regarding Turbo Boost: just put zip file on your SD card, install it through TWRP and follow on screen instructions... :fingers-crossed:
bratusm said:
Well, like it said on Link2SD app description: You should have two partitions on SD card and both should be primary.
The first FAT partition is your standard SD card storage. The second partition is used for application files and can be ext2, ext3, ext4 or FAT32.
Some phones lack the ext2, ext3 or ext4 file system support and you may get mount errors like "no such device", "invalid argument". These phones need ext2.ko or ext3.ko modules and even some additional modules to be able to mount. Using FAT32 on the second partition will eleminate such problems, because FAT32 is supported on all phones.
Try partitioning on pc using: http://www.easeus.com/partition-manager/ or http://www.partitionwizard.com/free-partition-manager.html or some other program, just make partition FAT32
Regarding Turbo Boost: just put zip file on your SD card, install it through TWRP and follow on screen instructions... :fingers-crossed:
Click to expand...
Click to collapse
ok so i will partition using fat32 for both but how can i link link2sd to one of my partition which i will use for moving apps ( as both will be fat 32 )
talalz94 said:
ok so i will partition using fat32 for both but how can i link link2sd to one of my partition which i will use for moving apps ( as both will be fat 32 )
Click to expand...
Click to collapse
Don't make both the same size
You can also try partitioning with (just found that app): https://play.google.com/store/apps/details?id=com.sylkat.AParted
mind the volume screen
bratusm said:
Don't make both the same size
You can also try partitioning with (just found that app): https://play.google.com/store/apps/details?id=com.sylkat.AParted
Click to expand...
Click to collapse
please see the attached file
talalz94 said:
please see the attached file
Click to expand...
Click to collapse
Use settings in link2sd to pick partition that you want. I don't have any other idea, sorry...
I tried both CWM and TWRP, but neither mount my SD card if it has an ext4 and fat32 partition. It works if only fat32. Android can see the SD card just fine.
SD card is Samsung EVO 32GB
CM12 with persistent recovery.
After that failed, i changed whole card back to FAT32 and tried to partition in TWRP (CWM didn't have option.) Twrp to partition.
Used windows 8.1 with minitool partition wizard.
Maybe you can try FOTA CWM and TWRP recoveries for custom ROMs
jkkk88 said:
Maybe you can try FOTA CWM and TWRP recoveries for custom ROMs
Click to expand...
Click to collapse
Thanks for replying, but I have not pressed thanks, as I stated in OP that I'm using those recoveries. The actual problem for those interested was that I had the partitions as logical, not primary.
However, it still takes ages to Mount, and it's a UHS card. Is it due to size of partition or something else?
theperson333 said:
Thanks for replying, but I have not pressed thanks, as I stated in OP that I'm using those recoveries. The actual problem for those interested was that I had the partitions as logical, not primary.
However, it still takes ages to Mount, and it's a UHS card. Is it due to size of partition or something else?
Click to expand...
Click to collapse
One: nobody comments here to get thanks.
Two: both partitions must be primary. I repeat, BOTH.
Three: with 4.3 stock, ext4 usually don't work for xperia m, but fat 32 works.
For CM12 EXT4 definately works, fat32 don't, apps disappears after reboot if you have fat32 on cm12.