Related
I can't boot up, can't get into recovery. I can only get into download mode. No matter what TWRP I flash, it says "Custom Binary(BOOT) Block By FRP Lock" on the Downloading screen.
I tried flashing stock 5.1.1 odin, 5.1.1 bootloader/modem, etc. Can't get past this to get into recovery or boot the device. Any suggestions??
EDIT: Good news! Flashing the stock 5.1.1 odin image worked . (link: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841)
It even preserved my data and everything (I guess b/c I was on the leaked 5.1.1). I'll probably just back up some things and start fresh on the stock software, but I'm just glad to have it working.
whittikins said:
I can't boot up, can't get into recovery. I can only get into download mode. No matter what TWRP I flash, it says "Custom Binary(BOOT) Block By FAP Lock" on the Downloading screen.
I tried flashing stock 5.1.1 odin, 5.1.1 bootloader/modem, etc. Can't get past this to get into recovery or boot the device. Any suggestions??
Click to expand...
Click to collapse
SmartSwitch disaster recovery mode.
whittikins said:
I can't boot up, can't get into recovery. I can only get into download mode. No matter what TWRP I flash, it says "Custom Binary(BOOT) Block By FAP Lock" on the Downloading screen.
I tried flashing stock 5.1.1 odin, 5.1.1 bootloader/modem, etc. Can't get past this to get into recovery or boot the device. Any suggestions??
Click to expand...
Click to collapse
More info, how did you get to this state of brick?
What was flashed, odined or installed.
Files, links. Etc.
Pp.
PanchoPlanet said:
More info, how did you get to this state of brick?
What was flashed, odined or installed.
Files, links. Etc.
Pp.
Click to expand...
Click to collapse
I was running the G925T (edge) leaked 5.1.1 rom ([5.1.1][ROM][TW][OE6] Blck/TW), which worked well for the month that I used it. I had TWRP from that thread installed as well (I think it was 2.8.6.x). Everything was good at this point.
Where I am now:
When I power the device on, it says:
KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
When I try to enter Recovery, it says:
RECOVERY IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
What I did to get here:
SHORT VERSION - flashed latest modem and bootloader for G925T (edge) via Odin.
LONG VERSION
Last night I attempted to flash (via ODIN) the G925T bootloader, modem, and TWRP for this ROM: http://forum.xda-developers.com/gal...-xtrestolite-pure-edition-1-0-beta-1-t3082467
G92xF(D)/T Galaxy S6 Universal Odexed Pure edition ROM
Based on the latest Samsung Stock G925F XXU2BOFJ Lollipop 5.1.1 firmware (Base build date: 20-JUN-2015)
NOTE: I didn't ever get to flash the ROM because the trouble started when trying to flash the bootloader/modem via ODIN.
- Odexed Pure Edition: Odexed & 100% original/Stock files!
Steps followed:
Do exactly step-by-step the following things:
- Unplug your Phone (IMPORTANT!)
- Turn your Phone completely off (This is IMPORTANT)
- Start your Phone in download mode on this way: Press Vol down + Home + Power buttons till the screen turns on, press Vol Up to continue (Only enter download mode on this way, otherwise it won't work!!)[/B]
- Open Odin 3.10.6 on your PC (Make sure you're using this version of Odin, other versions won't work correctly maybe!)
- Click on the 'BL' button, and load in your BOOTLOADER tar.md5 file for your model
- Click on the 'CP' button, and load in your MODEM tar.md5 file for your model
- DON'T TOUCH ANYTHING ELSE (you can brick your phone if you choose other settings in Odin)
- Now Connect your phone to your computer (DO NOT connect your phone before this step, otherwise it won't work!)
- Click on the Start button
- Wait till it finish flashing.
- Your phone reboots automatically after flashing. <--- device never rebooted because ODIN said Failed instead of Successful.
I then tried to flash TWRP 2.8.7.1 (link below) since maybe that had to be flashed before the bootloader/modem, but it failed too.
Links:
Odin 3.10.6
DOWNLOAD - https://www.androidfilehost.com/?fid=95916177934555153
[G925T] Odin Bootloader/Modem Packages:
5.1.1 Bootloader: G925T-UVU2COF6
DOWNLOAD - https://www.androidfilehost.com/?fid=24052804347766210
5.1.1 Modem: G925T-UVU2COF6
DOWNLOAD - https://www.androidfilehost.com/?fid=24052804347766211
You also have to update your TWRP to the latest version (2.8.7.1 or newer) when flashing this.
DOWNLOAD - http://build.twrp.me/twrp/twrp-2.8.7.1-zeroflte.img.tar
Is there a file I can Odin flash to disable FRP Lock? I can't boot up to turn it off.
If not, what are my options from here? Any way to preserve SDCARD or even /Data?
If all else fails, what Odin file should I flash to get back to stock?
EDIT: Regardless of what I try to flash in Odin (recovery, kernel, TWRP, modem), it begins the process but then fails because the phone states "_______ is not SEANDROID enforcing" and states FRP lock is on.
NexVision said:
SmartSwitch disaster recovery mode.
Click to expand...
Click to collapse
SmartSwitch isn't detecting my phone (although Odin does). What mode should it be in? I can get into Download Mode, but that's about it!
Your biggest problem right now is getting past FRP / factory reset protection, the only way to avoid this would have been to turn on bootloader unlock in "developer options"
OEM unlocking.
The security system is protecting your phone from you.
You need to be able to smartswitch back to stock but since your device status was not official, custom after running odin, root or anything else you may have done with root, smartswitch won't recognize your phone.
Without "OEM unlocking" on, the phone will turn on you.
The purpose of this security is to prevent your lost or stolen phone from been modified in any way and activated with another carrier.
Maybe tmobile has a procedure for returning phone back to normal.
Pp.
PanchoPlanet said:
Your biggest problem right now is getting past FRP / factory reset protection, the only way to avoid this would have been to turn on bootloader unlock in "developer options"
OEM unlocking.
The security system is protecting your phone from you.
You need to be able to smartswitch back to stock but since your device status was not official, custom after running odin, root or anything else you may have done with root, smartswitch won't recognize your phone.
Without "OEM unlocking" on, the phone will turn on you.
The purpose of this security is to prevent your lost or stolen phone from been modified in any way and activated with another carrier.
Maybe tmobile has a procedure for returning phone back to normal.
Pp.
Click to expand...
Click to collapse
Guys at the store couldn't do anything unfortunately. I guess it's just a brick now?
EDIT: The leaked 5.1.1 didn't have that option in dev options either. I guess running the leaked 5.1.1 is where I screwed up, even though it worked great while actually using it. I didn't have root, but I had TWRP recovery.
Would flashing the stock image work since it's not a custom one? I'm downloading it now from here: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
I'm guessing it won't work or else you would have suggested it. If anyone has a suggestion, I'm open to it!
It seems like there must be a way to disable FRP with an Odin flash, but maybe not.
whittikins said:
Would flashing the stock image work since it's not a custom one? I'm downloading it now from here: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
I'm guessing it won't work or else you would have suggested it. If anyone has a suggestion, I'm open to it!
It seems like there must be a way to disable FRP with an Odin flash, but maybe not.
Click to expand...
Click to collapse
After looking over article I give it a thumbs up, it may work for you.
Thats the problem with leaked updates or firmware, sometimes devs take shortcuts in order to package it for flashing and security stuff gets left out.
The ota 5.1.1, shows the option to turn on unlock bootloader .
Keep us posted, good luck.
Pp.
Screenshot showing option for bootloader unlock.
Pp.
PanchoPlanet said:
After looking over article I give it a thumbs up, it may work for you.
Thats the problem with leaked updates or firmware, sometimes devs take shortcuts in order to package it for flashing and security stuff gets left out.
The ota 5.1.1, shows the option to turn on unlock bootloader .
Keep us posted, good luck.
Pp.
Click to expand...
Click to collapse
Good news! Flashing the stock 5.1.1 odin image worked .
It even preserved my data and everything (I guess b/c I was on the leaked 5.1.1). I'll probably just back up some things and start fresh on the stock software, but I'm just glad to have it working. Thanks for taking the time to help out!
whittikins said:
Good news! Flashing the stock 5.1.1 odin image worked .
It even preserved my data and everything (I guess b/c I was on the leaked 5.1.1). I'll probably just back up some things and start fresh on the stock software, but I'm just glad to have it working. Thanks for taking the time to help out!
Click to expand...
Click to collapse
Glad to hear, don't forget about the oem unlocking in developer options.
Read carefully before you flash, and setup smartswitch on your pc, do a backup just in case.
Pp.
I had the same issue. I try to download stock firmware, download link just keep loading, doesn't work.
Is there any other links? samobile link doens't work neither. Thanks.
drakegao said:
I bricked my phone as well, same situation, I headed to that page try to download stock firmware, download link just keep loading, doesn't work.
Is there any other links? samobile link doens't work neither. Thanks.
Click to expand...
Click to collapse
Try a different pc, check your WiFi connection, or maybe Starbucks.
Pp.
Just checked link works and download works.
Pp.
PanchoPlanet said:
Just checked link works and download works.
Pp.
Click to expand...
Click to collapse
Thanks for replying, by the way. I got locked when i am still on 5.0.2 and i flash the bootloader and the modem. It was the modem of 5.1.1 didn't go through.
Will it be flashed through the 5.1.1 firmware, if not, any other options can solve the frp locked? Thanks
You need to flash 5.0.2 stock firmware with Odin, then maybe.
You can't flash anything that's 5.1.1 on your phone.
PanchoPlanet said:
You need to flash 5.0.2 stock firmware with Odin, then maybe.
You can't flash anything that's 5.1.1 on your phone.
Click to expand...
Click to collapse
tried, still failed in odin. I think is may be because my bootloader is actually 5.1.1's.
However, I saw above said flash 5.1.1 odin image ? what is that? Thanks.
solve it by flash 5.1.1 tar via odin as above said. thanks.
S6 edge g925t was rooted now stuck on samsung boot logo OI1, FRP is on so can't even flash customer kernel.
Try flashing back to stock DOI1. If that doesn't work try SmartSwitch emergency recovery. Good luck, my friend.
Akw6190 said:
Try flashing back to stock DOI1. If that doesn't work try SmartSwitch emergency recovery. Good luck, my friend.
Click to expand...
Click to collapse
Tried both still on samsung logo, before all this happened I was able to boot into system. I tried flashing twrp with oem unlocking off [didn't knew about it] since then it is stuck at the samsung galaxy screen. I understand they wanna secure the phone but intentionally adding caveats so users can break phones not so cool sammy
FRP or bootloader unlock was a Google creation, not Samsung's creation.
First seem on the Nexus 6 a year ago.
Pp.
same problem , by mistake I activated oem lock :crying:
done flash stock rom 0I1 :good:
tmfsoldier said:
done flash stock rom 0I1 :good:
Click to expand...
Click to collapse
did it work by flashing stock?
yes work!! download G925TUVU3DOI1_G925TTMB3DOI1_TMB
atinder said:
did it work by flashing stock?
Click to expand...
Click to collapse
Hello guys, I'm on LineageOS. I want to go back to Oxygen OS. But I can't because of my locked bootloader.
I did try to connect with the pc via adb: "Fastboot flash recovery recovery.img" and it's says everytime bootloader is locked enable OEM. I know the OEM is in the Developer Options but not for me. It's not available.
What to do now?
Code:
fastboot oem unlock
It will wipe all of your data.
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592
djmcnz said:
It will wipe all of your data.
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592
Click to expand...
Click to collapse
Just did it. And than this error.
tap build number 7 times to enable developer options, enable usb debugging, then u do the adb.
MrTalon4 said:
Just did it. And than this error.
Click to expand...
Click to collapse
Yes, that means it's not enabled in developer options.
Now you say you don't have that OEM option available in the developer options - are you sure you've turned developer options on? If not do as @gorillaCF says above.
If you have done that and still don't have the option then back everything up, do a factory reset and try again immediately after that.
Flash factory images and go back to clean stock. Boot OOS and enable oem unlock in dev options
EugenStanis said:
Flash factory images and go back to clean stock. Boot OOS and enable oem unlock in dev options
Click to expand...
Click to collapse
Flash with locked bootloader? Is this possible?
What's broken with TWRP? What happens when you boot to recovery? Do you have adb access in any sort of recovery state?
djmcnz said:
What's broken with TWRP? What happens when you boot to recovery? Do you have adb access in any sort of recovery state?
Click to expand...
Click to collapse
I can't boot in recovery I will be stuck in the OnePlus logo.
And yes, I have adb access but my bootloader locked...
MrTalon4 said:
I can't boot in recovery I will be stuck in the OnePlus logo.
And yes, I have adb access but my bootloader locked...
Click to expand...
Click to collapse
Can you boot the stock recovery using fastboot?
the Doctor said:
Can you boot the stock recovery using fastboot?
Click to expand...
Click to collapse
It always says FAILED: "unlock device to use command". (Fastboot boot recovery.img)
MrTalon4 said:
It always says FAILED: "unlock device to use command". (Fastboot boot recovery.img)
Click to expand...
Click to collapse
There is always this, but it will wipe everything and completely reset your phone:
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unbricking-tool-confirmation-t3733012
^
do that.
LineageOS 15.1 doesn't have the OEM unlock feature. Normally, if you temper with the system and lock the bootloader it won't boot at all making this option useless. At least that's what I've experienced. As others stated you can only use the unbrick tool which will definitely work or contact OnePlus for an L2 technician who will use the same tool to do so.
So how did you do this? Did you do "fastboot oem lock" with TWRP and LineageOS on the device?
Macusercom said:
LineageOS 15.1 doesn't have the OEM unlock feature. Normally, if you temper with the system and lock the bootloader it won't boot at all making this option useless. At least that's what I've experienced. As others stated you can only use the unbrick tool which will definitely work or contact OnePlus for an L2 technician who will use the same tool to do so.
Click to expand...
Click to collapse
Why the hell LineageOS 15.1 don't have the OEM unlock? This makes no sense, because now I have a big problem.
Yeah, the unbrick tool I'm lucky but for the others with different devices will not have this unbrick tool. That's very stupid. It will be last time for me, with LineageOS.
the Doctor said:
So how did you do this? Did you do "fastboot oem lock" with TWRP and LineageOS on the device?
Click to expand...
Click to collapse
I did nothing like this. It was just locked I was surprised to.
MrTalon4 said:
I did nothing like this. It was just locked I was surprised to.
Click to expand...
Click to collapse
Normally, it is impossible to lock it without fastboot. Again, it's not LOS's fault. You should never lock your bootloader if on a custom ROM or modified system. I've been running LOS 15.1 for almost a week and never had such an issue.
MrTalon4 said:
Flash with locked bootloader? Is this possible?
Click to expand...
Click to collapse
Yes, afaik You can flash factory images without unlocking bootloader
EugenStanis said:
Yes, afaik You can flash factory images without unlocking bootloader
Click to expand...
Click to collapse
Sorry sir, but the factory Images means stock ROM and stock recovery.
Can't flash both
Why there is no backdoor for this situation? Why is this not possible, that you need by Factory images no unlocked bootloader. That would fix many problems.
please help me
i got bootloop when clean flash and lock bootloader
but when unlock bootloader again it boot normally
royalcrown01 said:
please help me
i got bootloop when clean flash and lock bootloader
but when unlock bootloader again it boot normally
Click to expand...
Click to collapse
If you can unlock the bootloader again, I'd guess the flash didn't manage to erase everything.
Normally you'd have to boot and enable OEM unlocking before being able to unlock bootloader.
royalcrown01 said:
please help me
i got bootloop when clean flash and lock bootloader
but when unlock bootloader again it boot normally
Click to expand...
Click to collapse
Did gsi android 10 flash recently?
if the answer is yes
with the bootloader unlocked you must boot twrp and flash stock-repartition.zip
You can now block the bootloader in stock without bootloop
royalcrown01 said:
please help me
i got bootloop when clean flash and lock bootloader
but when unlock bootloader again it boot normally
Click to expand...
Click to collapse
There is another way too. Put your phone in EDL mode (fastboot oem edl) and flash the stock rom again. Even with clear_all_lock option enabled ,your phone won't lock your bootloader. When the phone boots up after flash,and you see the boot screen wait until you see erasing circle,after the second reboot,hold VOL - and power button until you go in fastboot mode. Then on your PC type: fastboot oem lock. The phone will boot up,then it will erase user data ,and you are ready with locked bootloader. I didn't have the stock repartition script ,so that's what i did.
Sent from my Xiaomi Mi A2 Lite using XDA Labs
Alijosekt said:
Did gsi android 10 flash recently?
if the answer is yes
with the bootloader unlocked you must boot twrp and flash stock-repartition.zip
You can now block the bootloader in stock without bootloop
Click to expand...
Click to collapse
Yes gsi android 10 is recently flashed
Can you give me link to stock-repartition ?
a1291762 said:
If you can unlock the bootloader again, I'd guess the flash didn't manage to erase everything.
Normally you'd have to boot and enable OEM unlocking before being able to unlock bootloader.
Click to expand...
Click to collapse
I tried but not helped
royalcrown01 said:
I tried but not helped
Click to expand...
Click to collapse
Well I told you the 100% working method so...
nikoman1987 said:
Well I told you the 100% working method so...
Click to expand...
Click to collapse
Problem solved with flashing stock_repartiting.zip
royalcrown01 said:
Problem solved with flashing stock_repartiting.zip
Click to expand...
Click to collapse
Nice to hear that! Sometimes flashing custom ROMs can be very frustrating
royalcrown01 said:
Problem solved with flashing stock_repartiting.zip
Click to expand...
Click to collapse
link for stock repartition zip?
melekbarca said:
link for stock repartition zip?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a2-lite/development/10-0-android-q-daisy-t3967734
melekbarca said:
link for stock repartition zip?
Click to expand...
Click to collapse
http://4pda.ru/forum/dl/post/17164801/stock_repartition.zip
nikoman1987 said:
There is another way too. Put your phone in EDL mode (fastboot oem edl) and flash the stock rom again. Even with clear_all_lock option enabled ,your phone won't lock your bootloader. When the phone boots up after flash,and you see the boot screen wait until you see erasing circle,after the second reboot,hold VOL - and power button until you go in fastboot mode. Then on your PC type: fastboot oem lock. The phone will boot up,then it will erase user data ,and you are ready with locked bootloader. I didn't have the stock repartition script ,so that's what i did.
Sent from my Xiaomi Mi A2 Lite using XDA Labs
Click to expand...
Click to collapse
Worked for me, thanks man.
,
Cremig said:
Worked for me, thanks man.
,
Click to expand...
Click to collapse
no problem
royalcrown01 said:
please help me
i got bootloop when clean flash and lock bootloader
but when unlock bootloader again it boot normally
Click to expand...
Click to collapse
I have same problem ..
robin_vilensky_ said:
I have same problem ..
Click to expand...
Click to collapse
If it works unlocked but not locked, something is modified. Leave it unlocked or flash a complete stock rom.
a1291762 said:
If it works unlocked but not locked, something is modified. Leave it unlocked or flash a complete stock rom.
Click to expand...
Click to collapse
1 I downloaded original firmware from xiaomi web site very 10.0.13
2 I moved all files to adb tools folder
3 I run the cmd file flash_all_lock.bat
4 phone rebooted and got boot loop only entered to recovery mode.
5 and yes he booting only with unlocked BL
Alijosekt said:
Did gsi android 10 flash recently?
if the answer is yes
with the bootloader unlocked you must boot twrp and flash stock-repartition.zip
You can now block the bootloader in stock without bootloop
Click to expand...
Click to collapse
Can you give me the stock-partition.zip?
robin_vilensky_ said:
1 I downloaded original firmware from xiaomi web site very 10.0.13
2 I moved all files to adb tools folder
3 I run the cmd file flash_all_lock.bat
4 phone rebooted and got boot loop only entered to recovery mode.
5 and yes he booting only with unlocked BL
Click to expand...
Click to collapse
Probably something failed to flash. I don't know how much error checking the script has. Try again? Take note of the output, looking for warnings and errors.
Hoping to get this fixed, after flashing a twrp tar file my phone cannot boot to rom or even recovery, but bootloops, is there a potential fix? Do I need to bootlock and unlock my phone?
What do you mean by "bootlock"?
Did you unlock your bootloader before flashing?
V0latyle said:
What do you mean by "bootlock"?
Did you unlock your bootloader before flashing?
Click to expand...
Click to collapse
Yes I did unlock my bootloader before flashing, what I mean by bootlock is locking the bootloader through download mode.
wavetsuname said:
Yes I did unlock my bootloader before flashing, what I mean by bootlock is locking the bootloader through download mode.
Click to expand...
Click to collapse
Never lock your bootloader unless you have flashed back to factory stock. Locking the bootloader on modified firmware will brick your device.
When you are in download mode, look at the upper left corner of the screen. There should be a line that reads OEM LOCK. Is this ON or OFF?
Which TWRP build are you using?
Factory stock is the only firmware I'm able to flash successfully, in download mode it says "OEM LOCK: OFF(U)", I attempted to flash TWRP 3.5.2, here's the file if needed, I have also attempted to flash other TWRP versions, but none worked.
I managed to get orange fox working, and it turned out I flashed the wrong stock ROM for my phone.
To flash TWRP with odin - one of previous version of stock ROM required. On the latest versions of stock ROM it is impossible to flash TWRP - the device goes into the bootloop.