Develop Bugs

Attempting to update 1 week old 8525 to ATT WM6 - Probs...

Ok, PC is fine, close any running programs. Hermes has stock WM5 with some programs added. Only reg tweaks are PTT and removed 3G animation at start.
Device syncs normally every day and both Work and Home.
When I follow all the directions, run the Updater - The PPC gets the Color Bars as the Updater is trying to read it....then AS (V4.5) disconnects and closes. (gone from taskbar) I can soft reset the device, reopen AS, they sync just fine. At this point I have the updater do the next, it pulls up the Current ROM info and says it will upgrade to the new one. I select next, and it starts.....and AS closes again. After a minute the upgrade app says it lost connection. (duh!)
Any ideas why?
I'm not a stranger to upgrading roms on PPC's, have several that have both been updated a number of times. No issues, though that several AS versions earlier.
I've given thought to Hard Reseting the device, but I'm wondering if its more AS's fault.
Any and all input much appreciated!
Thank You!

JETninja said:
Ok, PC is fine, close any running programs. Hermes has stock WM5 with some programs added. Only reg tweaks are PTT and removed 3G animation at start.
Device syncs normally every day and both Work and Home.
When I follow all the directions, run the Updater - The PPC gets the Color Bars as the Updater is trying to read it....then AS (V4.5) disconnects and closes. (gone from taskbar) I can soft reset the device, reopen AS, they sync just fine. At this point I have the updater do the next, it pulls up the Current ROM info and says it will upgrade to the new one. I select next, and it starts.....and AS closes again. After a minute the upgrade app says it lost connection. (duh!)
Any ideas why?
I'm not a stranger to upgrading roms on PPC's, have several that have both been updated a number of times. No issues, though that several AS versions earlier.
I've given thought to Hard Reseting the device, but I'm wondering if its more AS's fault.
Any and all input much appreciated!
Thank You!
Click to expand...
Click to collapse
Are you following the directions at THIS GUIDE . What ROM are you trying to put on there? Did you CID unlock the device? Are you running Vista? Do you have .NET 2.0 or 3.0 version?
That should be enough questions to get us started.

Did you read my title? This is the stock ATT WM6 that came out yesterday. No need to unlock the phone, it is a 1 week old ATT 8525 with the stock ATT WM5 Rom on it.....
Windows XP SP2+ PC.

If it's the rom RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship maybe it had some problems because if you go to the official release site http://www.htcamerica.net/support/8525/software-downloads.html they are still showing the WM5 rom for download.
There may have been a problem with the release and they pulled it back for some reason. Just a thought and not much help I'm afraid.

Yes thats it. When it ID's my current Rom and what it will upgrade to, it is correct. (it shows it's 3.62 vs my current 2.xx) Many peeps have had no problem upgrading to it. (most find it a very good Rom from the varios sites I read)
And this page at HTC still has it up:
http://www.america.htc.com/support/8525/software-downloads.html

JETninja said:
Ok, PC is fine, close any running programs. Hermes has stock WM5 with some programs added. Only reg tweaks are PTT and removed 3G animation at start.
Device syncs normally every day and both Work and Home.
When I follow all the directions, run the Updater - The PPC gets the Color Bars as the Updater is trying to read it....then AS (V4.5) disconnects and closes. (gone from taskbar) I can soft reset the device, reopen AS, they sync just fine. At this point I have the updater do the next, it pulls up the Current ROM info and says it will upgrade to the new one. I select next, and it starts.....and AS closes again. After a minute the upgrade app says it lost connection. (duh!)
Any ideas why?
I'm not a stranger to upgrading roms on PPC's, have several that have both been updated a number of times. No issues, though that several AS versions earlier.
I've given thought to Hard Reseting the device, but I'm wondering if its more AS's fault.
Any and all input much appreciated!
Thank You!
Click to expand...
Click to collapse
You just need to wait for a while AS shuts down that is normal be patient and it will start updating you will see a progress bar will take approx 10 min after that

@brorex he can wait till christmas next year, if the updater cant communicate with the device , because it has closed AS then it will never update.
@JETninja
try doing what i said to this guy here,
http://forum.xda-developers.com/showthread.php?t=341282
yesterday he upgraded with the same rom and device and it worked

brorex said:
You just need to wait for a while AS shuts down that is normal be patient and it will start updating you will see a progress bar will take approx 10 min after that
Click to expand...
Click to collapse
I thought that too, but after the color bar test when it want to set you up to actually install the ROM, the Upgrader whats you to make sure there is an active connection with AS. Well, there isn't. It shut down and the PPC is still showing the color bars. I can reset it, then re-sync to AS. (after having to re-launch AS from the Program Files - it no longer resides in the Tray when it shuts down during the process) I then get it going again, it attempts to start the ROM upgrade, AS quits again.....about a min later I get the Communication Error message....
I'm downloading a 2nd copy right now, will try it as soon as it completes...
*Edit...think I have an idea what I'm doing wrong, I have it connected and synced too early, the first part of the ROM updater is just a PC test, I'm thinking the PPC should not have been connected at that time. Re-trying it now.....

Try putting it in boot loader and upload...thats what i did when i updated my 8525...Very much like the new ROM...

Going to give it a shot here at work on this PC. If no go still, will try the above mentioned methods. PC at home kept getting communication errors...

i had the same problem
make the connection at AS then start the update process.... the 8525 will go into 3 bar mode and when the update gets to the upgrading rom screen... the installed rom wont show up.... hit upgrade... and then continue and it will work.... i was stuck there for a while too because if i waited for the istallation to load then made the as connection the right image would show up in the installer but then it would stop working after that.....

I just put this rom on my 8525 and it worked well for me. My 8525 is unlocked with supercid so I had to extract the OS and update using the methods described for working with SPL-140 Olipro with IPL-1.01 or the "How not to Brick thread".
That won't help you much as you don't want to do that mod to your New 8525 and void the warranty, but thought you might like to know the stock OS seems pretty stable at this point and I have had no problems yet.

Thanks everyone! It finally worked here on my Work PC. At home I could get to the Bootloader, but it would lose connection for some reason. Here I lost it the first time, but tried it again and it managed to stay connected and apply the update. Got it up and running, applied owner info, just now re-doing the AS relationship. (a good 500+ contacts! LOL! It'll take a little while as usual!)
Then it's back to all the tweaks I like so far...and some new ones I've held up on since I've been waiting for WM6.
Out of my 3 PDA's (2 ipaqs and this puppy) this one has certainly been the trickiest ROM update, but it seems to be more my device since most don't have this much trouble.
Thanks again!

So far- So good, but just one problem- BATTERY!!!
After I installed upgrade, my battery drains in few hours... I reset phone, I reloded upgrade- nothing helps! Warranty still in affect, but phone worked well and I'm positive- hardware is OK. What else can i do to fix this problem?

I have the same problem
ai6908 said:
Try putting it in boot loader and upload...thats what i did when i updated my 8525...Very much like the new ROM...
Click to expand...
Click to collapse
I have the same problem exactly. As soon as I start the upgrade the device immediately sleeps and the connection is lost. 1 minute later I get a Connection error message.
I am new to all this. How do i put the machine in 'boot loader' mode?
Thanks

Just did this rom update again on a 8525 the installation went extracting files active sync shut down wait a few minutes nothing happens the the upgrade screen no ACTIVESYNC connection while update is happening as soon as device is in bootloader mode activesync closes out

[Q] System UI has stopped working

Hi guys,
I'm new to this forum. My HTC Desire 300 is not rooted in anyway. Lately I've been experiencing problems with the System UI. It suddenly stopped working one day, and from then on, the notification bar never worked properly again. It comes back at random times, but even trying to pull it down will make it crash. Swiping a notification away and even just doing nothing to it will cause it to crash. I don't know why this is happening. I've tried factory reset, hard reset, battery pull, booting in safe mode, scanning for viruses, literally everything I can. Nothing works. Booting the phone up will show the error message and sometimes the error message will come up every few seconds then eventually stop and I never see it again until I restart the phone or shut it down and turn back on. Can somebody please help? I'm running 4.1.2 Jelly Bean.

I know that this in not best solution but you could try factory reset. You'll lose all of your data but you mobile should work normally.
Right now I have problem with Bluetooth and planing on doing same thing (or maybe try different ROM ).

ffroms said:
I know that this in not best solution but you could try factory reset. You'll lose all of your data but you mobile should work normally.
Right now I have problem with Bluetooth and planing on doing same thing (or maybe try different ROM ).
Click to expand...
Click to collapse
I wish I could fix it by factory reset, but I've literally done it like 5 times. Nothing works. I still get the same error. I've also tried clearing the cache for system UI app in the "all apps" list, but there is no data on the System UI app, it says 0.00B. I can't clear any cache or data. And I also notice that sometimes System UI app will run in the "running apps" list, but it is "restarting", and it seems like it fails to restart because it is always restarting.

How can I fix my ROM? My phone is not rooted and I have never modded it and installed any ROMs on it. Right now I'm just using 2 notification apps on the Play Store so that I get some sort of notification. But it's just not the same as the notification bar itself. I'm tempted to buy another phone, but when I was looking this problem up on the Internet, it seems like many phones, even the new and good ones get the same problem. So I'm really hesitating.

Did you try to do factory reset from Android or boot loader? Maybe other reset will do the trick.

ffroms said:
Did you try to do factory reset from Android or boot loader? Maybe other reset will do the trick.
Click to expand...
Click to collapse
Uhm what do you mean by bootloader? I think I've attempted to unlock my bootloader but I never actually did it. So I don't think I unlocked my bootloader. But I don't know how to factory reset by bootloader or by other ways that you are talking about. The way I do the factory reset is through my phone's system settings > Backup & reset > Reset phone. I've also tried hard reset.

I mean from default recovery not bootloader. Sorry, my bad.

Upgrading from older build to 10581?

I am on 10166, and I am stuck at 0% downloading. Anyone been able to upgrade to 10581 or is their 'upgrade bug' still there?

Will be 0% for few minutes, and then go to 100%. Patience

pawlakpl said:
Will be 0% for few minutes, and then go to 100%. Patience
Click to expand...
Click to collapse
Going on over an hour now.

Phone not updating to 10581
My phone has been 'updating' to 10581 for last two hours and is still on 0%
any ideas peeps?

kennygza said:
My phone has been 'updating' to 10581 for last two hours and is still on 0%
any ideas peeps?
Click to expand...
Click to collapse
same story. they really did a great job fixing the upgrade bug..

The update downloaded okay for me, but it's been at 0% Preparing to install updates for a bit.. Should be fine though. Seems all of the builds have been plagued in some way when it comes to updating. I'm updating from 10536.
Edit: Right as I was writing this post the install failed. It said it couldn't install updates at this time. I rebooted and now it started downloading again. Way to go Microsoft, just like all the rest! ?

build 10572
Hi guys, I'm having trouble updating to build 10581 from build 10572, it downloads the udate fine, it takes a while but gets to 100% eventually, but at around 50% on the preparing to install update part it stops and says the update can't be installed at this time we will try again later, error code (0x80070538), I've rebooted and soft reset and also stopped all my background apps and still it's stopping at 50%, I've tried this about 10 times, can someone give me some advice please.

riksye said:
Hi guys, I'm having trouble updating to build 10581 from build 10572, it downloads the udate fine, it takes a while but gets to 100% eventually, but at around 50% on the preparing to install update part it stops and says the update can't be installed at this time we will try again later, error code (0x80070538), I've rebooted and soft reset and also stopped all my background apps and still it's stopping at 50%, I've tried this about 10 times, can someone give me some advice please.
Click to expand...
Click to collapse
In other words, they havent fixed the bug. OS sucks.

MS say you need to use the Recovery Tool and go back to WP8. It is allegedly only occurring on phones originally released with WP8. HOWEVER numerous fellow Lumia 920 users report successful upgrade so I smell some BS in that story. My next step is back-up, hard reset, try to update. If that fails its borrow a PC and Recovery Tool time.

Connect ur device to charger it may help
The update was smooth for me download time-45mins spinning gears-1hrs(ya its too long) migrating data and all other things-45 to 50 mins and now m phn is ready to go...... No need to hard reset this build is quite stable

Finally got it installed on my 640. I must say that it is lightening quick compared to 10536. I haven't even reset it yet. As I'm trying to type this though I'm noticing the Swype recognition is not working right. Almost every word it ignores and puts nothing, or it's changing to the wrong words. Anyone else having this issue?
Edit: Swype seems to work fine in Messaging, but not In Edge or Facebook app..

My upgrade process was smooth! When I woke the phone was updated already.

Recently my Lumia 950 overheating

I`ve tried reseting my phone (soft and hard) , uninstalling all apps i can , stoping all background, updating all apps and os, sd and sim removed with or without loging my acc reseting ....you get it.
But my phone keeps running when im not using it ,my battery is drained by the start app and somethimes the lock app or accaunt app or some other random windows core app i cant stop. Strange thing is when i reset to an older version same thing ,in the background the start keeps draining and heating the phone.
So can some tell me if i missed something or should i try and use that interloper tool. And if its the 2nd can s1 point me to the current threads ,cause as i looked most ar either for old phones or older Os verions and i dont know if that is ok or im gona brick my phone ..., so i would apreaciate pointing me to the threads that work for current lumia 950 on windows 10 and are more newbi friendly ,cause i have never unlocked or done any of the other things on this forum on my phone

Make sure your on 15254 latest update 2 reset ur phone on 15254 then set it up update all apps and that should fix it 10586 14393 have heating issues on this phone

cooldude20000 said:
Make sure your on 15254 latest update 2 reset ur phone on 15254 then set it up update all apps and that should fix it 10586 14393 have heating issues on this phone
Click to expand...
Click to collapse
that didnt help either

Your right about the heat issue my mate had a 950 as well which he had on 15254 and it gets extremely hot

Question POCO F3 always reboots when I update to MIUI 13

I need help with my Poco f3. Ever since I updated my OS to Miui 13, my phone keeps rebooting every time I open any applications. Sometimes I can open them, but the phone still reboots randomly. I tried everything, did factory resets, and wiped out all the data, thinking it would solve the problem, but it did not. I also tried to downgrade to Miui 12.5, but I can't do so because I cannot unlock my phone. It says it needs 168 hours before unlock. My phone is very unusable right now, and I don't know what else to do but wait 168 hours/7 days to unlock my phone and install a new ROM. Is there any other way I can do to resolve this issue?

I have the exact same problem, I tried several solutions on the internet but nothing worked.
Every night my phone starts restarting nonstop. I'm waiting until Monday to finally unlock my bootloader, install an AOSP and never hear from MIUI again.

lafreantz said:
I need help with my Poco f3. Ever since I updated my OS to Miui 13, my phone keeps rebooting every time I open any applications. Sometimes I can open them, but the phone still reboots randomly. I tried everything, did factory resets, and wiped out all the data, thinking it would solve the problem, but it did not. I also tried to downgrade to Miui 12.5, but I can't do so because I cannot unlock my phone. It says it needs 168 hours before unlock. My phone is very unusable right now, and I don't know what else to do but wait 168 hours/7 days to unlock my phone and install a new ROM. Is there any other way I can do to resolve this issue?
Click to expand...
Click to collapse
Take it to service if it's unusable... If you're from a third world country there's a good chance they will downgrade the phone on the spot , if no you'll probably have couple days of downtime without phone
Other than that yeah nothing - except if you can find newer version you should be able to flash it from the miui updater. I'd personally do a factory reset first - then update via method below and after upgrade factory reset again! If that doesn't fix it idk, you'll have to determine whether flashing full ROM once BL is unlocked fixes it or if you should go and have the motherboard replaced...
You have to first enable "developer options" of the miui updater app , download the update firmware that's higher version than what you're on and then you can select the firmware in the app

Update: Fixed this by switching to ArrowOs, it seems that miui really is the problem haha

I believe it doesn't have anything to do with schedule turn on turn off? On miui you could schedule the phone to turn off at anytime and turn on anytime according to the settings...

Nazri786 said:
I believe it doesn't have anything to do with schedule turn on turn off? On miui you could schedule the phone to turn off at anytime and turn on anytime according to the settin
Click to expand...
Click to collapse

Nazri786 said:
I believe it doesn't have anything to do with schedule turn on turn off? On miui you could schedule the phone to turn off at anytime and turn on anytime according to the settings...
Click to expand...
Click to collapse