Stuck on initial loading screen - Verizon Galaxy Note 4 Q&A, Help & Troubleshooting

I have an issue with my Note 4 - It did not get past through the initial screen where it displayed "Samsung Galaxy Note 4". It would not go to "Recovery" screen either. It simply kept on boot-looping. So I tried to go to the download screen (Vol Down + Home + Power) and installed the stock firmware (L) through ODIN. Installation went successfully but now still cant enter the Recovery and keeps on boot looping with the blue text "RECOVERY BOOTING...." on the top left. Any suggestion would be highly appreciated?
I can go to Download mode but it wont go to recovery.
It is galaxy note 4 verizion retail version.

Related

[Q] Boot loop, nothing works

Hello,
I have tried for 2 days now to get this tablet working
It is Galaxy Note 10.1 2014 edition, WIfi only (SM-P600)
It is stuck in a boot loop, it shows the samsung logo in big white text "SAMSUNG GALAXY NOTE 10.1 2014 EDITION" then shuts off. then repeats about 4-5 seconds later.
I have tried:
-flashing stock rom
-flashing custom recovery
-flashing cf-autoroot
i can't access the recovery on the phone to do a factory reset. for the custom recovery in odin it works really fast then the tablet goes back into boot loop.
I can get into download mode with home + power + vol - but I can't get into recovery..
no SD card inserted
Problem may have come up while doing firmware upgrade -- this is my friend's tablet.
Thank you!
1998golfer said:
Hello,
I have tried for 2 days now to get this tablet working
It is Galaxy Note 10.1 2014 edition, WIfi only (SM-P600)
It is stuck in a boot loop, it shows the samsung logo in big white text "SAMSUNG GALAXY NOTE 10.1 2014 EDITION" then shuts off. then repeats about 4-5 seconds later.
I have tried:
-flashing stock rom
-flashing custom recovery
-flashing cf-autoroot
i can't access the recovery on the phone to do a factory reset. for the custom recovery in odin it works really fast then the tablet goes back into boot loop.
I can get into download mode with home + power + vol - but I can't get into recovery..
no SD card inserted
Problem may have come up while doing firmware upgrade -- this is my friend's tablet.
Thank you!
Click to expand...
Click to collapse
I would focus on flashing a stock ROM with Odin. Was the flash successful, any error messages?
You could also check the "Nandroid Erase All" box in Odin for a wipe.
Try Odin ver 3.09, if you are not already using it.
Did you try to re-download your Samsung ROM? A 4.4.2 version?

[Q] Galaxy Tab 3 loops at boot

Hello
I have a tab 3 7" SM-T210 with android 4.4.2 which I messed up trying to root. It loops at the tab 3 screen. Earlier I was able to get to the download part of it with the green android, the bar under it would fill up and from there I'd hold the power/menu/volume up button. It would hang at the tab 3 screen but from there I would be able to turn off/restart the phone and it would boot up as normal. I kept having problems and I tried doing a factory reset in the settings menu. Now the tablet hangs at the tab 3 screen. If I try to turn it off, itll reboot back to the tab 3 screen. I can hold the power/menu/volume down buttons to get to the download screen but power/menu/volume up just causes the tab to reboot. I've tried diggin through here, google searches, youtube searches and I'm unable to find a solution.

Black Screen except for Power Off

I recently attempted to flash CleanROM. When I completed the initial boot, the screen was completely black and I could not press anything. When I hold down the power button it pops up with the "power off" dialog box. I restarted it and still the same situation. I then went back into recovery and flashed the Stock + Root ROM and I am having the exact same issues. The screen is working in recovery and the boot animation shows but after it finishes booting I just have a black screen and then I can only "power off". Any thoughts would be greatly appreciated!
Nexus 7 2013 (flo)
I had the same problem once. No matter of full wipefrom recovery and flash a different ROM, the screen was still black. The only way I found to fix it is to flash the factory image from googlw and then root and flash ROMs again and the black screen disappeared.

stuck in samsung logo

Hi,
after flashing with oding official firmware the tab S 10.5 stuck in "SAMSUNG" logo.
how to resolve this issue. All the things are in stock, no modificatin implimented [KNOX 0.00]
TIA
Just be patient, at least 10 mins.
solve it by clearing the cache
power+volume plus and minus [together] + menu = black screen
release the volume down while black screen and entered the recovery

HELP TRIED EVERYTHING(Samsung galaxy s6 Sprint)

I have a Samsung Galaxy s6 on 5.1.1 (Sprint SM-G920P)
I tried downloading and failing to install xposed stupidly. So then it was stuck on a bootloop. I then again stupidly did a factory reset thinking that it'll fix the problem (but it only got worst in my opinion) i then flashed twrp and tried to install the uninstall for xposed but i couldnt uninstall it because it wasnt any data folder to put it in since i ****ing did a factory reset. Anyways then i got frustrated and did an advanced wipe and cleared all the data... I am now just stuck on the "samsung galaxy s6 ... Powered by android" screen and i need help . I literarlly tried everything
Black and white Samsung logo showed up.
Initially I could only get to blue Downloading screen
By observing and trying various described ways I finally got to the Android recovery menu.
My current procedure to get there is here:
Turn off holding Down+Power
The b/w Samsung logo will automatically come up and stay that way forever
Hold Down+Power+Home until screen goes black and move finder from Down to UP while still holding the Power+Home
as soon as black and white Samsung logo comes up AND continue holding UP+Power+Home until Android flashes and recovery menu comes up.
Then I did go through the described wipe cash, and factory reset and some more wipe cash with reboot system in various combinations and always ended on black and white Samsung logo screen.
Tried to flash sboot but failed.
Then the new firmware showed up for sprint and i tried flashing 2 firmwares (G920PVPU3BOJ7_G920PSPT3BOJ7_SPR and G920PVPU3BOI1_G920PSPT3BOI1_SPR)but both succeeded but is still on the samsung logo screen
From the recovery menu only power down selection is useful as it does turn the phone off until I turn it on. The power button does not power off – it just boots back on.
Apply update from cache gives yellow text in the bottom of the scree: “APPLY_CHEK is deprecate.”
I have no clue how to use e.g. first 3 menu items.
Reboot to bootloader – just brings the b/w logo .
View log displays row upon row of things I have no clue about – pages of it.
On the very bottom of the screen – in yellow – there are two lines:
“dm-verification failed…
Need to check DRK first…”
Please help. — Max
Download the PI3 file from here: http://forum.xda-developers.com/spr...uide-links-files-update-root-restore-t3366862
Flash using Odin. There is a video linked in the OP to show you how.
That should take you back to stock.
Do what Koop said and then follow: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
I also recommend this when you get Xposed working: http://forum.xda-developers.com/xposed/modules/app-xtouchwiz-customize-stock-samsung-t3296878
I use this on my S6 and have experienced absolutely no issues.

Categories

Resources