Shadow Kernel Is Here To Take Care Of Your Little Beast
ALL BUGS ELIMINATED AND KERNEL IS NOW STABLE AND SOURCE UPDATED
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Notice
Sorry For Delay In The Release Of Miui And Cm Based Roms Ran Into Some Weird Bug Now Trying To Fix.
Feature's
1-Abyssplugv2,Intellimm Governers Rest Of Them Removed
2-Custom Thermal Engine(Still Working On it To Make It More Cool)
3-Removed Mako Hotplug And Added Msm Hotplug For Better Stability
4-Cpu Overclocked To Almost 1.9ghz And Gpu To 700mhz
5-Multi Core Power Saving
6-Added Fast Charge
Thats It! I Am Adding Things Slowly To Track Bugs Quickly And Fix It:thumbup:
Bugs
None Till Now Help Me Find Them And Fix Them
How to Install
Boot into recovery
Wipe cache
Wipe dalvik cache
Flash kernel
Reboot and enjoy!
Use Kernel auditor To Tweak The Kernel
===============================================================================================
My SettingsCpu Maximum Frequency - 1845mhz
Cpu Minimum Frequency - 300mhz
Cpu Governor -Abyssplugv2 For Battery Saving And Ondemand For More Performance+Battery
Ondemand Governor Settings- Set Sync Freq And optimal freq to 300000 And Tick Apply On Boot In kernel Adiutor under cpu tab
Vibration Strength - 100%
Enjoy
===============================================================================================
NoteAfter Flashing any Kernel Or Rom let your Phone Cool down to normal temp before you start using it. Pls dont complain the phone is heating n lagging. Flashing n things have heavy CPU usage so it will Heat And Its better to let it cool down before using.
===============================================================================================
DOWNLOADS
Stable Release
Msm Hotplug->https://www.androidfilehost.com/?fid=24052804347853356
This Should Fix Thermal Issues But I will keep Working On thermals though and will try to make it cool as far as possible at 1.9ghz:victory:
===============================================================================================
NOTE:VERY IMPORTANT
1-If you think your phone is getting too hot then just lock the phone and let it rest as i said i am still working on thermals i will do my best to keep the phone as cool as possible without sacrificing performance and battery.
2-You can use this kernel only on slimlp and other roms based on on slimlp like slimsaber and if you flash this kernel on cm based roms your camera won't work same goes with miui camera and wifi won't work well i can make caf kernel for miui with working wifi but still camera won't work its up to you if you want caf kernel for miui with working camera just request i will add a build.:fingers-crossed:
==============================================================================================
A HUGE THANKS TO THESE GUYS
Tarun93 Guided Me Through Basics And Used His Fixes And Governers
rebelos This Awesome Guy For Briging Up CAF Kernel For Armani And Fixing Video Recording Bug
Biplov Biswas For testing the kernel and reporting issues quickly,He Encouraged Me To Fix These Issues And I Appreciate That:highfive::highfive:
XDA:DevDB Information
Shadow, Kernel for the Xiaomi Redmi 1S
Contributors
TheandroiDRaman, Tarun93, rebelos, Biplov Biswas
Source Code: https://github.com/Shadowr7240/trusty/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2015-11-03
Created 2015-10-06
Last Updated 2015-11-03
Reserved
Reserved
Kudos for MIUI support + faux + D2W....
abhi_qwerty said:
Kudos for MIUI support + faux + D2W....
Click to expand...
Click to collapse
It does supports miui but with 2 bugs camera and wifi sorry for not being clear thread updated
Big news...:thumbup:
Xiaomi seems to be release kk armani sources!
Have a look : https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/armani-kk-oss
Update Releasing Today For Miui 6/7 And Custom Roms!!!!!!!!!!!!
So Guys I Am Back After A Long Time With Tons Of Fixes And Modifications:fingers-crossed:
Link-> None Yet Wait Till Nightfall
TheandroiDRaman said:
So Guys I Am Back After A Long Time With Tons Of Fixes And Modifications:fingers-crossed:
Link-> None Yet Wait Till Nightfall
Click to expand...
Click to collapse
Glad to hear that sir, waiting for the link
waiting for link
Bootloop ©||©
v3ndul said:
Bootloop ©||©
Click to expand...
Click to collapse
Not Possible Its Working Fine No Bootloops
Rom
v3ndul said:
Bootloop ©||©
Click to expand...
Click to collapse
Which Rom Are You Using And Which Build?
Does it have d2w,d2s,s2s, off-screen guesture support like OPO ?
Dear, your git page link is broken, kindly update it, is the kernel based on 3.10??
Excellent work. Going to try
Thanks
Thanks for your Excellent work!
First boot was fine but on second boot it bootlooped. I v tried 3 times
link for miui 7 build??
manuhackzzz said:
Does it have d2w,d2s,s2s, off-screen guesture support like OPO ?
Click to expand...
Click to collapse
Dis kernel has none of dem... ! No gesture support..!! Its initial build buddy... He'll add dem later on..
---------- Post added at 04:58 PM ---------- Previous post was at 04:50 PM ----------
smustafasms said:
First boot was fine but on second boot it bootlooped. I v tried 3 times
Click to expand...
Click to collapse
For those of u who faced random reboots...
Good news coming through..!
Dev has fixed all d bugs and a new build is coming very soon.
Improving sound,cpu,gpu and overall performance...!!
??
UPDATE!!!!!!!!!!!
ALL ISSUES FIXED NEW BUILD IS UP FOR DOWNLOADING:fingers-crossed::fingers-crossed:
Related
Presenting OmniMetal rom for the Galaxy nexus where speed is king
This will be a semi nightly build and a work in progress
OmniMetal
Standard disclaimer-
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Credits and thanks to-
@Mwisbest for all his source with various fixes and optimizations
@bsmitty83 for his great kernel source
MBQ_ for help with github
Linaro for thier optimizated toolchains and code
Omni Rom for the awesome base
Vanir Aosp for all their code fixes and enhancements
Anyone else that contributed to source
Google and Linux for open source goodness
And of course anyone that uses my roms
Current Modifications by me
-O3 optimizations
Switch to linaro 4.8 toolchain
Added a little more gcc optimizations
Change animation scale in developer settings to .5 (helps with graphics some and gives an overall snappier feel)
Various tweaks and modifications for performance
Switch to Dirty_V
To-do List
Suggestions?
Downloads
OmniMetal-maguro
Suggested PA gapps
Installation
Use only the latest cwm (6.0.4.3) or latest TWRP (2.6.3.1)
Backup current rom in recovery
Wipe cache and data (I suggest wiping system as well but its optional)
Flash rom
Flash Gapps
Reboot
Enjoy some OMNI goodness
Known Issues
none?
Like my rom or work?
Donate to me
XDA:DevDB Information
OmniMetal, ROM for the Samsung Galaxy Nexus
Contributors
metalspring
ROM OS Version: 4.4.x KitKat
Based On: Omni Rom
Version Information
Status: Beta
Created 2013-12-01
Last Updated 2014-06-01
User Input and Issues or Bug Reports
User Input-
Although my coding knowledge is limited I am still open to try to add in any feature suggested here
However, please try to limit it to features found in other kitkat roms since it's most likely beyond my ability to forward port things lol
If you have any other feature requests please post them in the thread or at this link
Issues/ Bug reports-
If you have any issues with this rom, please provide details so I can troubleshoot them
details should include-
version of the rom you are using
kernel you are using (if not stock kernel)
any modifications you are using (ART, supersu, etc)
what the issue was and what were you doing when it happened
And also logcats/dmesg/last_kmesg logs are appreciated (even with known issues)
I will do my best to fix any issues that might arise to the best of my ability
Suggested Apps, Settings and Various Other Goodies
My personal settings for maximum performance
DirtyV kernel (included in rom)
TCP Congestion Control: Cubic
Read Ahead Buffer Size: 1024
I/O Scheduler: FIOPS
Frequencies-
230000 Min
1500000 Max
700000 Max Screen Off
350000 Min Screen on
Governor: Ondemandplus
Dynamic Fsync: On (Please turn this off while adjusting settings to avoid issues if these settings dont work with your phone)
Temperature Limit: 80
GPU OC: 512 MHz
ZRam: Off
SmartReflex: Core, IVA MPU All On
Optimal Display Settings-
Content Adaptive Brightness- Off
Contrast: -14
Gamma Adjustment: 6
Gamma Offsets-
Red: - 6
Green: 0
Blue: 8
Color Multipliers-
Red: 200
Green: 200
Blue: 265
Other Settings for Performance-
Force GPU Rendering: On
ART Runtime
Window Animation Scale: .5
Transition Animation Scale: .5
Animator Duration Scale: .5
NEPHILIMS CUSTOM KERNEL SETTINGS (For balance of performance and battery life)
Useful Apps/Addons
Xposed Framework (Not compatible with ART runtime)
For Music Lovers- VIPER4Android (Please follow instructions in thread op and use SuperSu)
Google Dialer with nearby places and search
Photosphere Addon
Anything you think should be here? Just tell me and it will be added
Looks great I'll try!
Sent from my Galaxy Nexus using Tapatalk
Looks good. I'm willing to give it a go as soon as it's uploaded.
Niksko said:
Looks good. I'm willing to give it a go as soon as it's uploaded.
Click to expand...
Click to collapse
Its up now
Graphical glitches?
A line on "Graphical glitches with screen rotating and with the CRT-Off animation" means no Graphical glitches?
jangale_asrar said:
A line on "Graphical glitches with screen rotating and with the CRT-Off animation" means no Graphical glitches?
Click to expand...
Click to collapse
Yup, no graphical glitches in the browser or on CRT screen off or rotation, the only glitch left is the screenshot preview appears all messed up, but the screenshot turns out just fine anyway
Will have it the issue of random reboot? I tried slimkat, plenty of random reboots
Kewyang said:
Will have it the issue of random reboot? I tried slimkat, plenty of random reboots
Click to expand...
Click to collapse
I cant say you'll never get a random reboot but if you do its most likely due to your kernel settings and not the rom
Basically its as stable as previous android versions, but much snappier
metalspring said:
I cant say you'll never get a random reboot but if you do its most likely due to your kernel settings and not the rom
Basically its as stable as previous android versions, but much snappier
Click to expand...
Click to collapse
Ok... thanks a lot .. btw i want to ask, i have nandroid back up my 4.4 which i flashed last few days before going back to 4.3.1.. Then, when i tried to restore back to slimkat in order to flash cmetal i faced bootloop, it is 4.3 cant flash back to 4.4?
Any visible benefit of using Linaro for KK on maguro? Won't it be negligible at this point? We're pretty much hardware/kernel limited now, aren't we?
So far the performance on this rom with mpo kernel is awesome for me, dirty flash from Slimbean 4.3 build 2.. Facing force close on setting when trying to enter developer setting(was trying to change to art)... Any idea about this issue?
some more kitkat love!!!!
Kewyang said:
So far the performance on this rom with mpo kernel is awesome for me, dirty flash from Slimbean 4.3 build 2.. Facing force close on setting when trying to enter developer setting(was trying to change to art)... Any idea about this issue?
Click to expand...
Click to collapse
i think clean flash will fix ur problem
Uhm, don't know if this is a bug.. but if I UV too far with Trickster, my phone freezes and reboots (to be expected), but never boots back up.
Also, Superuser doesn't work with ART, you need SUPERSU.
Some information
To metalspring.
Lagfix, Ble 4.0 and Volume Sound fix are in the rom?
What kernel do you reccomend?
Thanks
smooth and stable
Thanks for your great Rom. My nexus fly with this Rom and ART!
How's the battery life?
Bugs
first each time when I send a sms, it is sent twice.
---------- Post added at 12:31 PM ---------- Previous post was at 12:28 PM ----------
[/COLOR]
Rareba said:
How's the battery life?
Click to expand...
Click to collapse
good
ZigZag Kernel
Code:
Code:
#include
/*
* [STRIKE]Your warranty is now void[/STRIKE]. JK, this is oneplus
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.[/LEFT]
*/
Not gonna describe why the kernel is made. Just know that this kernel will be very close to stability and no unnecessary features will be added. Aim is to remain as close to stock as possible
Features:
Kernel patched upto linux 3.10.68
Kernel always up-to-date with latest CAF tags(Latest can be found here: https://www.codeaurora.org/xwiki/bin/QAEP/release)
Governors: Impulse
I/O Schedulers: SIO, FIOPS
O3 and many other flags
KCAL post-processing driver(savoca)
Frandom driver
Additional TCP Congestion algorithms
Hell lotta patches to random stuff to improve kernel stability
Note: You must have root and a custom recovery installed before installing this kernel!
Installation Instructions:
Download ZigZag latest kernel release
Put it in your sdcard
Reboot to recovery
Take a backup of current ROM in case anything goes wrong!
Flash the kernel
Reboot
Downloads:
Kernel (Androidfilehost)
Bug reporting:
I will not entertain bugs which are reported without any kernel log.
Credits:
@savoca: for kcal
CAF/Qualcomm: For latest patches and fixes
@neobuddy89: For patches and hotplug
@Grarak: For cm12 and cm12 kernel
@merewood bebox: For being a great tester!
Changelogs on post #2
Now flash dat sh#t and enjoy
XDA:DevDB Information
ZigZag kernel, Kernel for the OnePlus 2
Contributors
##W4TCH0UT##
Source Code: https://github.com/W4TCH0UT/zz_plutonium
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R2
Stable Release Date: 2015-09-04
Created 2015-09-02
Last Updated 2015-09-11
Changelogs:R3:
Removed experimental overclock support
R2:
Added power-efficient workqueues
LMK patches
MSM hotplug driver by neobuddy89
Intelli-plug by faux123
Bricked Hotplug/MSM MP-Decision by showp1984
Impluse governor by neobuddy89
SIO and FIOPS I/O schedulers
R1:
Initial Release
##W4TCH0UT## said:
Changelogs:
R1:
Initial Release
Click to expand...
Click to collapse
Any more details on the governors, hotplugs etc?
good, i think the days of over customized kernel are over. What we really need now is a close to stock, with a few but important feature like kcal.
Will flash and report soon!
@##W4TCH0UT##
Edit:Camera app force closes.Tried both stock and 3rd party app.
Logs attached!
Tapped from my ①+②=❸
vaisakh7 said:
Will flash and report soon!
@##W4TCH0UT##
Edit:Camera app force closes.Tried both stock and 3rd party app.
Logs attached!
Tapped from my ①+②=❸
Click to expand...
Click to collapse
OxygenOS or cm12?
Regards
##W4TCH0UT## said:
OxygenOS or cm12?
Regards
Click to expand...
Click to collapse
OOS 2.0.2
Tapped from my ①+②=❸
##W4TCH0UT## said:
OxygenOS or cm12?
Regards
Click to expand...
Click to collapse
oxy
Luigi_2 said:
oxy
Click to expand...
Click to collapse
Hmm, thanks. Will look into this.
Regards
vaisakh7 said:
OOS 2.0.2
Tapped from my ①+②=❸
Click to expand...
Click to collapse
Can you get me a kmsg also? (kmsg or last_kmsg)
Regards
##W4TCH0UT## said:
Can you get me a kmsg also? (kmsg or last_kmsg)
Regards
Click to expand...
Click to collapse
/sys/fs/pstore folder is empty!
Tapped from my ①+②=❸
Wait. Anybody tried the kernel on cm-12.1 and faced same issue of camera FC?
I'm asking this because I have merged some extra CAF stuff only for caf based/cm-12.1 based ROM's not stock, so stock users may face some issues(Didn't know it was related to camera). I'll compile new kernel without CAF for stock users too.
Regards
hey, one more thing, mp3 player doesnt play too, oxy 2.0.2, using phonograph, tried again with solid explorer to no avail.
youtube works though.
I was on 2.0.1 and the camera seemed to be fine will try again on 2.0.2 and provide logs if I can
Hey, could anybody pls post the stock oxygen 2.0.2 boot.img as I dont have the pc with me right now. I need to get the player working till the dev gets this fixed.
Appreciate!
Luigi_2 said:
Hey, could anybody pls post the stock oxygen 2.0.2 boot.img as I dont have the pc with me right now. I need to get the player working till the dev gets this fixed.
Appreciate!
Click to expand...
Click to collapse
Ready to help you but where can i find that boot.img file??
Anybody willing to test out a new ROM for me? You need to test it right away and report to me ASAP.The user must have a knowledge to trigger a logcat.I asked yesterday about the testers in the CM12.1 thread but I failed to get a suitable reply from any of the OnePlus Two users.PM me for the download links.
aniket.lamba said:
Anybody willing to test out a new ROM for me? You need to test it right away and report to me ASAP.The user must have a knowledge to trigger a logcat.I asked yesterday about the testers in the CM12.1 thread but I failed to get a suitable reply from any of the OnePlus Two users.PM me for the download links.
Click to expand...
Click to collapse
Please do not spam my thread asking for testers.
Regards
New kernel uploaded!
New version(R1) is uploaded with probable fixes for all issues.
Please test and report back here if you guys are encountering same issues as before with camera, mp3 etc.
Cheers
##W4TCH0UT## said:
New kernel uploaded!
New version(R1) is uploaded with probable fixes for all issues.
Please test and report back here if you guys are encountering same issues as before with camera, mp3 etc.
Cheers
Click to expand...
Click to collapse
Phone doesn't boot with this Kernel.
Tapped from my ①+②=❸
ATTACKED-KERNEL
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WARNING: THIS KERNEL IS FOR STOCK LOLLIPOP ROMS ONLY
I know that maybe im a little late but... until motorola release Marshmallow Firmware and kernel sources I give you this kernel:
This kernel works on STOCK LOLLIPOP Roms... DOESNT WORK IN CM/AOSP !
The main goal is to have a stable and optimized Kernel, with usefull features ...
The features Are :
Updated to lastest Motorola 5.0.2 Sources
Any Kernel Installer Script
Compiled Using Linaro 4.9.3
Reclaimed RAM from loggers
Added Power Suspend 1.5
Removed MPdecision
Added Intelli_plug 5.4
Added msm_hotplug
CPU Underclocking
Enabled Power Eficcient Worqueues
Added SmartMax Governor
Added Intellimm Governor
Added Yankactive Governor
Added Intellidemand CPU Governor
Added Intelliactive CPU Governor
Added zzmoove CPU Governor
Added TripNdroid I/O Schreduler
Added SIO I/O Schreduler
Added ZEN I/O Schreduler
Added fiops I/O Schreduler
Added bfq I/O Schreduler
Some Kernel Optimizations
USB Fast Charge V2
GPU Overclock (578Mhz)
Permissive SElinux
Added IntelliThermal V2
Updated CPUboost
Added Dyn Fsync On/Off Support
Added Asynchronous Fsync
Decreased Voltage Values For More Battery
Added Adreno-Idler
Added MSM_Slepper
Added LCD_KCAL
Added optimized flags
Enabled Kernel NEON Mode
Added ARCH_POWER & Disable Gentle Fair Sleepers On/Off
Added Faux Sound
Added MultiRom Support
Lots Of Tweaks and Optimizations
Lots Of Updates and Fixes
DOWNLOAD
ATTACKED-KERNEL V2
XDA:DevDB Information
ATTACKED KERNEL - STOCK LOLLIPOP 5.02, Kernel for the Moto G 2014
Contributors
attack11, Motorola , Cyanogenmod, faux123 , fermasia , savoca , varun chitre , pinkflozd ,franciscofranco , Alberto97, luca020400, LuK1337
Source Code: https://github.com/attack11/Attacked-Kernel
Kernel Special Features: Simple & Stable Kernel
Version Information
Status: Beta
Current Beta Version: AttackedKernel STOCK
Beta Release Date: 2015-12-02
Created 2015-11-24
Last Updated 2015-12-02
Reserved
Reserved For Changelog
02-12
V-2 Release
Dropped Synapse Support
Fix bugs with Xposed
Kernel Comes Pre-Tweaked by Default
I know that maybe im a little late but... until motorola release Marshmallow Firmware and kernel sources I give you this kernel,Please if you test and try give some feedback, Thanks !
nice job
attack11 said:
I know that maybe im a little late but... until motorola release Marshmallow Firmware and kernel sources I give you this kernel,Please if you test and try give some feedback, Thanks !
Click to expand...
Click to collapse
I came here to write the same lol
Anyways is great to see more work here, too bad i'm not planing to get back to lp stock anymore, but for mm i'll test it asap
Keep it up, amigo! :highfive:
CreasingMass Dev said:
I came here to write the same lol
Anyways is great to see more work here, too bad i'm not planing to get back to lp stock anymore, but for mm i'll test it asap
Keep it up, amigo! :highfive:
Click to expand...
Click to collapse
:silly: Yes , But since im using stock lollipop again and I have some free time... and there is some more people still using it, Also its a good "base" for marshmallow when its ready , hopefully be soon
:good:
Not sure why, but after flashing this kernel Xposed (v78 and v75) is not working. The framework is installed but it's not active. Log says that the zygote service is not running. Is there any patch that disables the process?
Sorry for my english
attack11 said:
I give you this kernel,Please if you test and try give some feedback, Thanks !
Click to expand...
Click to collapse
Thank you forthis Kernel. I just flashed it, comming from stellar Kernel. I have to say it feels much more snapier. well i don't play much games so i can't say anyhting about that. The only Thing i dislike. xposed stopped working: the module is installed but not enabled... maybee a symple reinstall helps
edit: the Kernel needs a bit to load. i stopped 1 minute 5 sec. On bootlogo
Gesendet von meinem Moto G 2014 mit Tapatalk
h4ck3r00 said:
Not sure why, but after flashing this kernel Xposed (v78 and v75) is not working. The framework is installed but it's not active. Log says that the zygote service is not running. Is there any patch that disables the process?
Sorry for my english
Click to expand...
Click to collapse
domics said:
Thank you forthis Kernel. I just flashed it, comming from stellar Kernel. I have to say it feels much more snapier. well i don't play much games so i can't say anyhting about that. The only Thing i dislike. xposed stopped working: the module is installed but not enabled... maybee a symple reinstall helps
Gesendet von meinem Moto G 2014 mit Tapatalk
Click to expand...
Click to collapse
Yes Ive Faced the bug with xposed , i will try to fix it for next build,The workaraund is to open xposed app and select the option soft reboot that way it works :good:
attack11 said:
Yes Ive Faced the bug with xposed , i will try to fix it for next build,The workaraund is to open xposed app and select the option soft reboot that way it works :good:
Click to expand...
Click to collapse
Okay thank you, maybe i'll wait the next build
If you want, i'd suggest you to add to your thread your personal/recommended settings for this kernel
h4ck3r00 said:
Okay thank you, maybe i'll wait the next build
If you want, i'd suggest you to add to your thread your personal/recommended settings for this kernel
Click to expand...
Click to collapse
I will , The next version will come pre-tweaked with the settings I recommend,Cheers!
Kernel Updated !
Small Changes:
Dropped Synapse Support
Fix bugs with Xposed
Kernel Comes Pre-Tweaked by Default
Cheers!
attack11 said:
Kernel Updated !
Small Changes:
Dropped Synapse Support
Fix bugs with Xposed
Kernel Comes Pre-Tweaked by Default
Cheers!
Click to expand...
Click to collapse
Thank you for the update but i still have the same error with the xposed.. Module 78 is installed but not active.. Try to: software reboot now
Gesendet von meinem Moto G 2014 mit Tapatalk
@domics
Hi did you a clean install? Or are you comming from the previous version? Please flash stock kernel first. And then flash this one
attack11 said:
@domics
Hi did you a clean install? Or are you comming from the previous version? Please flash stock kernel first. And then flash this one
Click to expand...
Click to collapse
i come from the previous Version and didn't flash the stock Kernel first. Will do so thanks
Gesendet von meinem Moto G 2014 mit Tapatalk
I can confirm that after flashing kernel with stock as previous one, xposed is working fine. I wanted to ask for some tweaks to get smooth my device. Because since i installed this kernel i have faced some glitches and lags, so i don't know which could be the problem.
PD: I made the installation exactly after fresh stock rom installation.
Hi the kernel comes pre-tweaked with what i feel its the best balance betwen performance & battery life, you can tweak it with the app kernel adiutor for example,its the one i recommend,Cheers !
C-3PO said:
I can confirm that after flashing kernel with stock as previous one, xposed is working fine. I wanted to ask for some tweaks to get smooth my device. Because since i installed this kernel i have faced some glitches and lags, so i don't know which could be the problem.
PD: I made the installation exactly after fresh stock rom installation.
Click to expand...
Click to collapse
CPU undervolt don't help yet
Why, Below stock 300 MHZ, work in same battery Voltage
And only slowing System, Energy saving is not present in this case.
---------- Post added at 12:38 AM ---------- Previous post was at 12:21 AM ----------
This kernel came EXFAT Suport for SD CARD?
Thanks.
Hi i know but some less cicles in CPU can help for battery,Ive not implemented exfat support yet , maybe next version
Flashing stock or stellar kernel over this breaks wifi. Have to revert to this.. Any possibility of flashing other kernel without losing wifi? Don't want to flash stock from the start. :/
Sent from my XT1068 using Tapatalk
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now probably void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Compiled using UBERTC 4.9.4
It is recommended to use the SmartPack Kernel Manager to use and control this kernel.
Works only on AOSP roms.Do not try to install on MIUI.
WARNING:TAKE A BACKUP OF YOUR BOOT.IMG AND THEN FLASH THIS KERNEL.I WILL NOT BE RESPONSIBLE IF YOU BRICK YOUR DEVICE.
Latest Updates will be announced here.
(+) 3.18 Kernel v1 Released!
What's new:
- Initial release,check CHANGELOG
Check the CHANGELOG and NOTES below for more details
Click to expand...
Click to collapse
FEATURES:
3.18 kernel:
*CPU Governors: Lionfish,Chill,Relaxed,Electron,ZZMoove
*Hotplugs: Lazyplug
*Power saving workqueues
*GPU Governors: Simple_ondemand
*Simple GPU Algorithm
*Adreno Idler
*I/O schedulers: sio,zen,maple
*Dynamic fsync 2.0
*Screen:KCAL v2,Backlight dimmer
*TCP Congestion Algorithm: westwood,reno,cubic,cdg
*Custom crypto algorithms: Chacha20*,ZSTD algorithms
*SCH_CAKE net scheduler
*Optimized ZRAM
*Various optimizations and fixes
Click to expand...
Click to collapse
INSTALLATION:
Make sure you have a proper recovery. TWRP 3.2.x is recommended
*Backup your boot.img.
*Press INSTALL,locate and flash the zip.
*Reboot.
NOTE:If you want to reinstall the kernel,restore stock boot image and flash
Click to expand...
Click to collapse
DOWNLOADS:
Mediafire:
3.18 kernel (v1):
REVVZ Kernel 3.18 v1
Click to expand...
Click to collapse
CREDITS:
@mahajant99 for the sources,
The UBER Team for the UBER toolchain,
and all other kernel devs whom I cherry-picked sources from.
Please PM me for proper credits if not given.Thanks.
Click to expand...
Click to collapse
CHANGELOG:
3.18 kernel
v1:
#Initial release
CHANGELOG:
-- CPU Governors: Lionfish,Chill,Relaxed,Electron,ZZMoove
-- GPU Governors: Simple_ondemand
-- Adreno idler enabled (and tuned for msm8953)
-- I/O Schedulers: BFQ,SIO,Zen,FIOPS,Maple
-- Crypto changes:
|-- Add Chacha20* algorithms
|-- Add ZSTD compression algorithm
-- Improved Random(entropy) generator to use Chacha20*
-- Dynamic Fsync 2.0
-- Sched and ION optimizations
-- Added and fixed MDSS notifier hooks
-- Backlight dimmer feature
-- Undervolting feature (?)
-- Disabled debugging and logging
-- Removed some wakelocks
-- Optimized ZRAM:
|-- ZSTD as default compression algorithm
|-- Removed redundant code and fixed various errors
-- TCP changes:
|-- Add SCH_CAKE as net scheduler
|-- Add CDG as default TCP congestion algorithm
|-- Fastopen optimization
-- Eliminated some overhead
-- Misc optimizations and fixes (not that relevant)
Click to expand...
Click to collapse
NOTES:
*This kernel has been designed with stability and performance enough to get you a
good battery life.It has been specifically designed for normal app usage and multitasking.
*This kernel is not for heavy gaming.Please be aware while playing games/using heavy apps.
*RAM usage,battery life,performance etc. can vary with usage.Please dont complain about any problem if you apps
are wildly running in the background or you dont maintain your device properly.Sometimes it is not the fault of the kernel.
.Please provide proper bugreports(/proc/last_kmsg,dmesg output,/sys/fs/pstore/console-ramoops files can be provided)
otherwise your bugfix request will be ignored.
Click to expand...
Click to collapse
A Huge Thanks to you people for downloading my kernel.If you like it,leave a Thanks!
XDA:DevDB Information
REVVZ Kernel, Kernel for the Xiaomi Redmi S2
Contributors
darkhzy_kh
Source Code: https://github.com/darkhz/revvz_ysl
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 3.18-v1
Beta Release Date: 2019-11-11
Created 2019-11-11
Last Updated 2019-11-11
I will try...
thanks...:good:
it works
I will test the performance for the next few days...
1.if the screen turns off there is an incoming message, the device does not wake up.
(WhatsApp apk)
this is unbelievable a custom kernel for our device many thanks and huge respect God bless you brother. i have 1 request too please try to build Linux 4.9 kernel for this device too in future if you can (maybe it's too much to ask but it's only a request)
ram management is good due to inclusion of swap partition (1gb) and battery seems to be draining fast
Hi, i never used a Kernel before. I used lots of roms but I dont know what is kernel and why is it important. Anyways.
I was wanting to use KCAL app, it seems it's working with it. I have some questions.
1- how to back up my own kernel, so if I want to restore it I can go back to my original kernel.
2- is it just some kind of backend thing, if I install this it will not act like a rom and reset all the data on my phone right?
3- somebody says it have battery drain problem above in the comments. I don't care about battery drain so much but how it drains, like 1% per 2 or 3 minutes is okay but if it's less than this it won't be okay for me.
4- as I said above, I will use it for KCAL app, is there similar great things that I can do with custom kernel? I don't know much about it.
That's all. Sorry for my bad English.
Thanks
zulkarneyn said:
Hi, i never used a Kernel before. I used lots of roms but I dont know what is kernel and why is it important. Anyways.
I was wanting to use KCAL app, it seems it's working with it. I have some questions.
1- how to back up my own kernel, so if I want to restore it I can go back to my original kernel.
2- is it just some kind of backend thing, if I install this it will not act like a rom and reset all the data on my phone right?
3- somebody says it have battery drain problem above in the comments. I don't care about battery drain so much but how it drains, like 1% per 2 or 3 minutes is okay but if it's less than this it won't be okay for me.
4- as I said above, I will use it for KCAL app, is there similar great things that I can do with custom kernel? I don't know much about it.
That's all. Sorry for my bad English.
Thanks
Click to expand...
Click to collapse
1. first backup your boot partition via twrp.
restore if you want to return to your original kernel
2.yups...
thanks bro
All the cpu cores are running at max frequency all the time in this kernel that's why it's draining battery so fast
Does i can flash it on havoc os 10
sanketdeoraj said:
Does i can flash it on havoc os 10
Click to expand...
Click to collapse
yes u can (arm64) ... but back up first your boot partition
parthibratan said:
All the cpu cores are running at max frequency all the time in this kernel that's why it's draining battery so fast
Click to expand...
Click to collapse
the battery drain is normal here, actualy is better than the default in custom rom ProjectEva
nataloppez said:
the battery drain is normal here, actualy is better than the default in custom rom ProjectEva
Click to expand...
Click to collapse
Witch rom Is Project Eva?
KackBarton said:
Witch rom Is Project Eva?
Click to expand...
Click to collapse
ProjectEva is the default kernel pre-installed in custom roms for our device. This kernel is better for gaming, but Revvz kernel is better for multtasking, and is for that reason that i use Revvz kernel.
It has not worked for me in HAVOC OS 10, however in roms with Android 9, Evolution type, etc, yes
paul vity said:
It has not worked for me in HAVOC OS 10, however in roms with Android 9, Evolution type, etc, yes
Click to expand...
Click to collapse
This works on Android 10 Arm64
paul vity said:
It has not worked for me in HAVOC OS 10, however in roms with Android 9, Evolution type, etc, yes
Click to expand...
Click to collapse
i don't know what you did, but is working very well for me in Havoc
nataloppez said:
i don't know what you did, but is working very well for me in Havoc
Click to expand...
Click to collapse
I installed it after the rom and it gave me brick
I had to reinstall the rom and not install that kernel
I'll try again, thanks
Code:
> Your warranty is now void.
> I am not responsible for bricked devices, dead
> SD cards, or any other mishaps. Please do some research or go through
> the source repo if you have any concerns about kernel
> before flashing it.
Features:
Energy Aware Scheduling
CFQ I/O Scheduler
Flar2'sSound Control
Boeffla Wakelock Blocker
Customized CAF CPU-Boost
Kerneltoast's Devfreq Boost
Joshuous' Dynamic Stune Boost
Some Upstreams, Backports and Optimizations
Download
Changelog:
z2_plus | z2_row
Credits:
[•] DD3Boh [•] Kenny3fcb [•] davidevinavil [•] YaroST12 [•] joshuous [•] Renderbroken [•] Flar2 [•] franciscofranco
[•] Kerneltoast [•] MihranT [•] kdrag0n [•] osm0sis
XDA:DevDB Information
droopy-kernel for Lenovo ZUK Z2 (Plus)
Contributors
ajaivasudeve
Source Code: https://github.com/ajaivasudeve/kernel
Version Information
Status: Stable
Created 2019-12-08
Last Updated 2019-12-09
Info:
Telegram Group | Telegram Channel | EAS
Boost Drivers | Schedutil | ROMs | MODs
okay, there's something new!!! trying it first thing!
but can you please share some benchmark scores???
EDIT:
network guru app says Qualcomm baseband and driver isn't installed. do something about it please! *FIXED*
??
droopy-eas-r1
[09/12/2019]
changelog:
* Initial stable release
* Linux 4.4.206
* CAF-tag LA.UM.8.4.r1-04600-8x98.0
* Fixed Network Signal Guru driver issues from beta build
Download
the_harsh said:
okay, there's something new!!! trying it first thing!
but can you please share some benchmark scores???
EDIT:
network guru app says Qualcomm baseband and driver isn't installed. do something about it please!
Click to expand...
Click to collapse
Network guru issue has been fixed in the stable release. Thanks for notifying
I don't care about benchmark scores. The intention is to give a satisfactory performance with good enough battery life with as low heating as possible. If you care about performance nameless is probably what you should opt for.
ajaivasudeve said:
Network guru issue has been fixed in the stable release. Thanks for notifying
I don't care about benchmark scores. The intention is to give a satisfactory performance with good enough battery life with as low heating as possible. If you care about performance nameless is probably what you should opt for.
Click to expand...
Click to collapse
nameless imo is the worst,day to day smoothness is non-existent,tap an app and you have to wait a sec for it to open up,so I'm excited to test your kernal sir, I don't care about gaming performance if that's what you were talking about,so far lineage os kernal seems to be the king when it comes to responsiveness
ajaivasudeve said:
Network guru issue has been fixed in the stable release. Thanks for notifying
I don't care about benchmark scores. The intention is to give a satisfactory performance with good enough battery life with as low heating as possible. If you care about performance nameless is probably what you should opt for.
Click to expand...
Click to collapse
thankyou for quick update bro! i can live without benchmark scores or performance!
I'm using it since tomorrow till now the experience is good enough! I'll update after spending sometime with it!
Going to try this one soon. But I've somy questions (noob ?). My Z2 is now on AOSiP-9 with Nameless r29 and L-Speed installed.
- Can I just flash this kernel directly? Or flash AOSiP-9 over again and then flash droopy?
- Do I need to uninstall L-Speed? Or is there any need of installing L-Speed, spectrum or similar app?
I don't need any performance based kernel since I don't play games. Only need a battery oriented one with enough speed for daily use, that's all. So definitely gonna try this very soon.
niyonsv said:
Going to try this one soon. But I've somy questions (noob ). My Z2 is now on AOSiP-9 with Nameless r29 and L-Speed installed.
- Can I just flash this kernel directly? Or flash AOSiP-9 over again and then flash droopy?
- Do I need to uninstall L-Speed? Or is there any need of installing L-Speed, spectrum or similar app?
I don't need any performance based kernel since I don't play games. Only need a battery oriented one with enough speed for daily use, that's all. So definitely gonna try this very soon.
Click to expand...
Click to collapse
Dirty flash ROM, then flash kernel then magisk if necessary. Flashing on top of other kernels will likely give miserable results.
Using L-speed or any kinda mod with the kernel is not recommended. What works with other kernels probably won't work on droopy. I don't expect users to use any companion apps. It is supposed to give optimum results by default. If the default setup is not up to your expectations, use kernel managers like FK kernel manager[recommended] or kernel adiutor for tweaking the setup. There are more than enough tunables to play with. However do note, that I am responsible only to the default setup, and any mishaps due to changes from user's end is not upto me to solve.
Pro af
nice job! dev..kernel s smooth..but i faced some kernel panics....screen freezes and soft reboots!
Penyameen said:
nice job! dev..kernel s smooth..but i faced some kernel panics....screen freezes and soft reboots!
Click to expand...
Click to collapse
I'm aware of the issue. I'll address it in the upcoming releases. Thanks for notifying anyway.
Can i use this Kernel with Lineage 16.0 official build?
Sudarxda said:
Can i use this Kernel with Lineage 16.0 official build?
Click to expand...
Click to collapse
Yes, you can.
Deleted
ajaivasudeve said:
Yes, you can.
Click to expand...
Click to collapse
Hey,nice to see u still developing for z2 plus
Good luck man:good:
:good:
[22/12/2019]
* Rebased tree to LA.UM.8.2.r1-05100-sdm660.0 CAF Tag
* Merged lnx-4.4.206
* Disabled some more unnecessary configs
* Fixed: forced-closes
* Removed Kcal
* Removed Wireguard
Download
ajaivasudeve said:
[22/12/2019]
* Rebased tree to LA.UM.8.2.r1-05100-sdm660.0 CAF Tag
* Merged lnx-4.4.206
* Disabled some more unnecessary configs
* Fixed: forced-closes
* Removed Kcal
* Removed Wireguard
Download
Click to expand...
Click to collapse
Latest update is promising .... Normal usage battery drain is minimal... Still testing...
Great work dev?