Related
So , let's start with jb kernel .
It's only for stock JB(4.1.2) based rom, don't use it for AOSP BASED ROM (CM9,CM10,CM10.1,AOKP,EOS, etc... ) I'm not responsible for any damage caused by my kernel , use it as your risk
Features
[V1] Prerooted and with cwm recovery (thanks to Doomlord)
[V1] CPU OC up to 1900 Mhz and UC to 30 Mhz
[V1] Build Optimization
[V1] Compiled with Linaro
[V1] VDD sysfs (voltage control interface)
[V1.1] Boot freq capped at 1512Mhz
[V1.1] Upstream to Linux 3.4.3
[V1.1] Two version : 1.7 Ghz and 1.9 Ghz
[V1.4] WriteBack tweaks
[V1.4] Gpu 2D/3D OC
[V1.4] Tweaked a bit Lionheart
[V1.4] Use glibc for memcpy and memmove
[V1.4] Increased Sd card cache(READAHEAD)
[V1.4] LINUX 3.4.4(from 3.4.0)
[V2] Added and tweaked MpDecision to have best performance and battery life
[V2] LOAD_FREQ (4*Hz+61) avoids loadavg moire
[V2] Some scheduler Tweak
[V2] Pipe compiling
[V2] Arm Thumbee support
[V2] Emmc latency decreased (more reactive)
[V2] Tweaked slub allocator
[V2] Tweaked Lionheart Governor to be less aggressive , so more battery friendly
[V2] Tweaked Pegasusq Governor to be more interactive and with better hotplug decision
[V2] Linux 3.4.20
[V2] Reworked a bit GPU OC
[V3] Improved WorkQueue for high priority
[V3] Switched build optimization
[V3] Tweaked Badass governor
[V3] msm :kgsl : Process all idle checks
[V3] Cpu1 fix : Cpu1 will follow cpu0 governor and min/max freq
[V3] Added Simple GPU governor (thanks to @faux123 ) ->>>>>>>>> To enable it use Trickster Mod app or Fauxclock app
[V3] Base for thermal management
[V3] Switched to westwood TCP congestion algorithm
Governor
[V1] Enabled Interactive governor
[V1.4] Lionheart governor
[V2] Added Pegasusq governor -> [Removed in V3 ]
[V3] Added Badass governor ( thanks to @show-p1984 )
Scheduler
[V1] Added SIO scheduler
[V1.4] Added Zen scheduler
[V2] Added Row scheduler
[V3] Added Fifo scheduler
[V3] Added Row scheduler
[V3] Added Fiops scheduler
Credits
Doomlord for his ramdisk and for helping me http://forum.xda-developers.com/showthread.php?t=2305591
Sony for the source
Dpiroto for the bootlogo (it's the same of the ICS v3.1)
Showp1984 for mpdecision and help
Faux123
Download link
V4 1.7Ghz version :https://docs.google.com/file/d/0Bxgnq5_SOY8tRjNPVlFZUHVkV1E/edit?usp=docslist_api
V4 1.9Ghz version : removed, I'll upload it in max 10h
I'm not sure if this works , so report me any issues
My sources are visible on github : https://github.com/Forzaferrarileo/fuji-msm8660-JB-3.4.0
The thread is going to be improved
The bootlogo is going to be changed
reserved
Forzaferrarileo said:
So , let's start with jb kernel .
It's only for stock JB(4.1.2) based rom, don't use it for AOSP BASED ROM (CM9,CM10,CM10.1,AOKP,EOS, etc... ) I'm not responsible for any damage caused by my kernel , use it as your risk
Features
[V1] Prerooted and with cwm recovery (thanks to Doomlord)
[V1] CPU OC up to 1900 Mhz and UC to 30 Mhz
[V1] Build Optimization
[V1] Compiled with Linaro
[V1] VDD sysfs (voltage control interface)
[V1.1] Boot freq capped at 1512Mhz
[V1.1] Upstream to Linux 3.4.3
[V1.1] Two version : 1.7 Ghz and 1.9 Ghz
[V1.4] WriteBack tweaks
[V1.4] Gpu 2D/3D OC
[V1.4] Tweaked a bit Lionheart
[V1.4] Use glibc for memcpy and memmove
[V1.4] Increased Sd card cache(READAHEAD)
[V1.4] LINUX 3.4.4(from 3.4.0)
[V2] Added and tweaked MpDecision to have best performance and battery life
[V2] LOAD_FREQ (4*Hz+61) avoids loadavg moire
[V2] Some scheduler Tweak
[V2] Pipe compiling
[V2] Arm Thumbee support
[V2] Emmc latency decreased (more reactive)
[V2] Tweaked slub allocator
[V2] Tweaked Lionheart Governor to be less aggressive , so more battery friendly
[V2] Tweaked Pegasusq Governor to be more interactive and with better hotplug decision
[V2] Linux 3.4.20
[V2] Reworked a bit GPU OC
[V3] Improved WorkQueue for high priority
[V3] Switched build optimization
[V3] Tweaked Badass governor
[V3] msm :kgsl : Process all idle checks
[V3] Cpu1 fix : Cpu1 will follow cpu0 governor and min/max freq
[V3] Added Simple GPU governor (thanks to @faux123 ) ->>>>>>>>> To enable it use Trickster Mod app or Fauxclock app
[V3] Base for thermal management
[V3] Switched to westwood TCP congestion algorithm
Governor
[V1] Enabled Interactive governor
[V1.4] Lionheart governor
[V2] Added Pegasusq governor -> [Removed in V3 ]
[V3] Added Badass governor ( thanks to @show-p1984 )
Scheduler
[V1] Added SIO scheduler
[V1.4] Added Zen scheduler
[V2] Added Row scheduler
[V3] Added Fifo scheduler
[V3] Added Row scheduler
[V3] Added Fiops scheduler
Credits
Doomlord for his ramdisk and for helping me http://forum.xda-developers.com/showthread.php?t=2305591
Sony for the source
Dpiroto for the bootlogo (it's the same of the ICS v3.1)
Showp1984 for mpdecision and help
Faux123
Download link
Test V3 version : https://www.box.com/s/8o38tu1jqz36hd2o94kp
I'm not sure if this works , so report me any issues
My sources are visible on github : https://github.com/Forzaferrarileo/fuji-msm8660-JB-3.4.0
The thread is going to be improved
The bootlogo is going to be changed
Click to expand...
Click to collapse
.211 ? .200 ? download now. .
Androidians said:
.211 ? .200 ? download now. .
Click to expand...
Click to collapse
It works for both
.211 kernel source hasn't been released
Sent from my LT26i using xda app-developers app
Forzaferrarileo said:
It works for both
.211 kernel source hasn't been released
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
my stok rom .211 , if i flash this will brick my device. .im just use stok kernel by cobrato. .
Forzaferrarileo said:
So , let's start with jb kernel .
It's only for stock JB(4.1.2) based rom, don't use it for AOSP BASED ROM (CM9,CM10,CM10.1,AOKP,EOS, etc... ) I'm not responsible for any damage caused by my kernel , use it as your risk
Features
[V1] Prerooted and with cwm recovery (thanks to Doomlord)
[V1] CPU OC up to 1900 Mhz and UC to 30 Mhz
[V1] Build Optimization
[V1] Compiled with Linaro
[V1] VDD sysfs (voltage control interface)
[V1.1] Boot freq capped at 1512Mhz
[V1.1] Upstream to Linux 3.4.3
[V1.1] Two version : 1.7 Ghz and 1.9 Ghz
[V1.4] WriteBack tweaks
[V1.4] Gpu 2D/3D OC
[V1.4] Tweaked a bit Lionheart
[V1.4] Use glibc for memcpy and memmove
[V1.4] Increased Sd card cache(READAHEAD)
[V1.4] LINUX 3.4.4(from 3.4.0)
[V2] Added and tweaked MpDecision to have best performance and battery life
[V2] LOAD_FREQ (4*Hz+61) avoids loadavg moire
[V2] Some scheduler Tweak
[V2] Pipe compiling
[V2] Arm Thumbee support
[V2] Emmc latency decreased (more reactive)
[V2] Tweaked slub allocator
[V2] Tweaked Lionheart Governor to be less aggressive , so more battery friendly
[V2] Tweaked Pegasusq Governor to be more interactive and with better hotplug decision
[V2] Linux 3.4.20
[V2] Reworked a bit GPU OC
[V3] Improved WorkQueue for high priority
[V3] Switched build optimization
[V3] Tweaked Badass governor
[V3] msm :kgsl : Process all idle checks
[V3] Cpu1 fix : Cpu1 will follow cpu0 governor and min/max freq
[V3] Added Simple GPU governor (thanks to @faux123 ) ->>>>>>>>> To enable it use Trickster Mod app or Fauxclock app
[V3] Base for thermal management
[V3] Switched to westwood TCP congestion algorithm
Governor
[V1] Enabled Interactive governor
[V1.4] Lionheart governor
[V2] Added Pegasusq governor -> [Removed in V3 ]
[V3] Added Badass governor ( thanks to @show-p1984 )
Scheduler
[V1] Added SIO scheduler
[V1.4] Added Zen scheduler
[V2] Added Row scheduler
[V3] Added Fifo scheduler
[V3] Added Row scheduler
[V3] Added Fiops scheduler
Credits
Doomlord for his ramdisk and for helping me http://forum.xda-developers.com/showthread.php?t=2305591
Sony for the source
Dpiroto for the bootlogo (it's the same of the ICS v3.1)
Showp1984 for mpdecision and help
Faux123
Download link
Test V3 version : https://www.box.com/s/8o38tu1jqz36hd2o94kp
I'm not sure if this works , so report me any issues
My sources are visible on github : https://github.com/Forzaferrarileo/fuji-msm8660-JB-3.4.0
The thread is going to be improved
The bootlogo is going to be changed
Click to expand...
Click to collapse
Does it support SD card?
Androidians said:
my stok rom .211 , if i flash this will brick my device. .im just use stok kernel by cobrato. .
Click to expand...
Click to collapse
Boot or don't boot? I need to know it because I don't own a acro s
Sent from my LT26i using xda app-developers app
Stop quoting the OP please
boyheadkick™
Sent with my PACman powered Acro S using Tap-Tap-Tapatalk
Kernel works, but Sd Card isn't working
Gesendet von meinem LT26w mit Tapatalk 2
t3ram said:
Kernel works, but Sd Card isn't working
Gesendet von meinem LT26w mit Tapatalk 2
Click to expand...
Click to collapse
Ok, I missed something in the ramdisk
Sent from my LT26i using xda app-developers app
It CAN DETECT external SD card but it can't read things from it (From notifications area - "SD card safe to remove, You can safely remove SD card")
Alright let me explain further:
- It shows my music, photos, videos, everything... but CAN'T PLAY/READ them.
Those are the only bugs I've seen so far.
same with me. .sd card cant detect. .
For those of you who want to go back to cobrato's stock modified kernel (for .211 firmware) WITH STOCK WIFI MODULES (for WiFi to work again)....
Credits to cobrato for his kernel.
Flash this in CWM
https://www.box.com/s/9759ti6305ey74t1llnl
Hit the THANKS button if I helped
To the dev, it will be great if you can do a workaround with the sd card bug
ItBankRock said:
For those of you who want to go back to cobrato's stock modified kernel (for .211 firmware) WITH STOCK WIFI MODULES (for WiFi to work again)....
Credits to cobrato for his kernel.
Flash this in CWM
https://www.box.com/s/9759ti6305ey74t1llnl
Hit the THANKS button if I helped
To the dev, it will be great if you can do a workaround with the sd card bug
Click to expand...
Click to collapse
I'm going to check the differences between cobrato's ramdisk and mine(DoomLord's one)
I saw that in my ramdisk in only mounted sdcard , you need also external sdcard
Sent from my LT26i using xda app-developers app
Forzaferrarileo said:
I'm going to check the differences between cobrato's ramdisk and mine(DoomLord's one)
I saw that in my ramdisk in only mounted sdcard , you need also external sdcard
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Good Now I Know.. What File IN Ramdisk? int,rc? or what?
TrinityHaxxorX said:
Good Now I Know.. What File IN Ramdisk? int,rc? or what?
Click to expand...
Click to collapse
good luck for your work dude
Any news on the ramdisk? I'd like to try this kernel, but without external SD card it does not make much sense for me since I use it quite a lot.
mattes13 said:
Any news on the ramdisk? I'd like to try this kernel, but without external SD card it does not make much sense for me since I use it quite a lot.
Click to expand...
Click to collapse
I'm watching for it, I'm busy these days
Sent from my LT26i using xda app-developers app
Hi!
I've been using your kernel for deodexed 211 stock rom for acro S...
Is it based on 200?, 'cause I've been receiving notification for the 211 update...
By the way, external sd card works for me, maybe because of my file system...
teddy0209 said:
Hi!
I've been using your kernel for deodexed 211 stock rom for acro S...
Is it based on 200?, 'cause I've been receiving notification for the 211 update...
By the way, external sd card works for me, maybe because of my file system...
Click to expand...
Click to collapse
Yes, based on. 200.... .211 source hasn't been released, I think because the kernel doesn't have any changes
Sent from my LT26i using xda app-developers app
Pls find zzmoove governor module & symsearch.ko attached. Zzmoove governor by ZaneZam & symsearch by Scrilax_CZ.
1.Frequency table edited to match Wiko Cink Slim kernel with 7 frequency [166,250,500,667,750,834,1001 Mhz]
2.Will still work with stock kernel with 6 frequency [lowest 250Mhz] but scaling not optimum.
3.Tested on stock kernel & Pdroid's custom kernel V01G [forum.frandroid.com/topic/141908-icskernel-custom-kernel-wcs-v01g-240413/]
4.Dual core & deep sleep operating satisfactorily.
5.Compiled with WCS ICS kernel source. [3.0.13]
6.Other Tinno S8073 based phone can try if same kernel version.
6.Load symsearch.ko first then cpufreq_zzmoove.ko
Happy trying.:good:
Technical information:
The kernel of Linux: 3.4.0.
Latest version: 24/05/2016.
Version Nitrogen: 3.0.
Compiled by: Linaro 4.9.4.
Based on: MAKO (occam).
Which devices: E975, E975*, F180*, E977, E987, E973, E971, LS970, E970 | GEEHRC, GEEHRC4G, GEESPR, GEEB.
Sources: https://github.com/nitrogen-devs/android_NitrogenEx_kernel
Download latsets builds: https://github.com/nitrogen-devs/android_NitrogenEx_zips
Acceleration turn on themselves.
For Lollipop and Marshmallow roms
Features:
Overclock CPU up to 1.7 GHz
Underclock CPU up to 162 MHz
Overclock GPU up to 622 MHz
Add GPU voltage control
Add CPU voltage control
Change 85° as Temp Threshold
Add UKSM
Add FIFO, SIO, VR, ZEN I/O Schedulers
Add abyssplugv2, lionheart, lulzactive, pegasusq, uberdemand, wheatley, ondemandplus, smartmaxV2, smartass, nightmare, darkness, alucard, HYPER, optimax, yankdemand, smartass H3 CPU governors
Add simple GPU governor
Add CPUFREQ limiter
Add MSM hotplug
Add CPU boost driver
Add USB otg support
Add Use Android device as USB keyboard/mouse
Add USB fast charging support
Add Fixes media playback (msm_rotator driver fixes)
Add Faux sound control
Add Faux speaker control
Add Faux gamma control
Add wifi wakelock
Add frandom - 2.4
Add fsync - 2.4
Add DoubleTap2Wake - 2.4
Add Sweep2Wake - 2.4
Add Screen Off Track - 2.4
Add Volume Control - 2.4
Add ZRAM - 2.4
Stock WiFi driver - 2.6
SeLinux permissive - 2.6
Use Linaro 4.9.4 compiler
xz algorithm for compression of a kernel is used and xz fixes
Calibrated gamma and contrast
Read Ahead buffer changed to 3072 kb
CPU Freq default 162 MHz - 1.5 GHz
GPU Freq default 400 MHz
Synched to latest MM sources
And other features & fixes included
Full changelog
Bold - by default
Still thanks to :
Faux123 : https://github.com/faux123
Showp1984 : https://github.com/showp1984
Franciscofranco : https://github.com/franciscofranco
ChangYeoun : https://github.com/ChangYeoun
Jollaman999 : https://github.com/jollaman999
Gu5t3r : http://forum.xda-developers.com/member.php?u=4665716
PsychoGame : http://forum.xda-developers.com/member.php?u=4647521
Christopher83 : https://github.com/Christopher83
Loller79: https://github.com/Loller79
xyyx: http://forum.xda-developers.com/member.php?u=5422618
P. S. Want to help or make a contribution? Accept pull requests on github.
XDA:DevDB Information
Nitrogen Extreme Kernel, Kernel for the LG Optimus G
Contributors
Mr.MEX
Source Code: https://github.com/nitrogen-project
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.0
Stable Release Date: 2016-05-24
Created 2015-05-21
Last Updated 2016-05-23
Settings
reserved
Are you aware you didnt include a download link?
The links are in the another thread with the same name of this
OMGMatrix said:
Are you aware you didnt include a download link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/devdb/project/?id=9888#downloads
What is the difference between this and the other topic?
(Sorry for my english)
lucasrods said:
What is the difference between this and the other topic?
(Sorry for my english)
Click to expand...
Click to collapse
This one is for kernel, the other is for a tweaked build of CM with this kernel built in.
nchc said:
This one is for kernel, the other is for a tweaked build of CM with this kernel built in.
Click to expand...
Click to collapse
I mean, from this: http://forum.xda-developers.com/showthread.php?t=3085312
Hi , I've got some troubles after I flash your kernel or your cyanogen released. After I restart, apps crash randomly (ex trebuchet, camera, playstore etc.) or my phone goes to bootloop. I don't have these problems with solid drivers. Do you know why?
Thanks
Aruken said:
Hi , I've got some troubles after I flash your kernel or your cyanogen released. After I restart, apps crash randomly (ex trebuchet, camera, playstore etc.) or my phone goes to bootloop. I don't have these problems with solid drivers. Do you know why?
Thanks
Click to expand...
Click to collapse
You need to put on a clean firmware.
To put the kernel into a kernel - evil.
Do you know where I can find a clean firmware? Like E97520B_00.kdz or I just have to flash aroma v7 rom?
Aruken said:
Do you know where I can find a clean firmware? Like E97520B_00.kdz or I just have to flash aroma v7 rom?
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?s=&showtopic=420801&view=findpost&p=32742458
http://4pda.ru/forum/index.php?showtopic=420801
/edit
Ok sorry i dont know why there a two threads..
Just flashed this one right here.
I have to flash this after flash the rom and gapps?
(sorry for my english)
0.3.2:
Disabled undervolt.
Added frequency 50, 75 MHz (added system.exe), 2.03 GHz.
CPU frequency: 50 MHz min, max 1.51 GHz.
The GPU frequency: 400 MHz.
Fixed random reboots.
Mr.MEX said:
0.3.2:
Disabled undervolt.
Added frequency 50, 75 MHz (added system.exe), 2.03 GHz.
CPU frequency: 50 MHz min, max 1.51 GHz.
The GPU frequency: 400 MHz.
Fixed random reboots.
Click to expand...
Click to collapse
I'm using AICP build by dadi11, can i flash this kernel? I have to do any wipe?
Sorry i'm noob [emoji14]
You can.
Wipe dalvik and cache.
/edit
Delete me
Will the camera on geeb works in the last version as in Solid?
In the previous one it wasn't working.
Now it boots perfect.... Before, the only version can boot on my phone was 0.28, but now this one also boot... Only sometimes i've got random reboots when i'm using a bluetooth headset, but i don't know if it's kernel or rom, cause with solid kernel i've got the same... Thanks for your work!!!
Anyone who knows how to instal TWRP in LG E975 since the safest way to unlock bootloder in FREEGEE is through Mako???
brandolicious said:
Anyone who knows how to instal TWRP in LG E975 since the safest way to unlock bootloder in FREEGEE is through Mako???
Click to expand...
Click to collapse
Download FreeGee from play store..
Open and select TWRP
Select mako..
Your all done..
Reboot to recovery..
Sent From LG-E975
Powered By ArT MoD V7 & fuelled by Solid Kernel V1.95 ?
Recovery : TWRP 2.8.4 with MultiROM and MTP
CPU Governer : Intelliactive
CPU Clock Range : 162 to 172800
UnderVolt : 125000
GPU Clock Range : 128 to 487
I/O Scheduler : fiops
MasterFURQAN said:
Download FreeGee from play store..
Open and select TWRP
Select mako..
Your all done..
Reboot to recovery..
Sent From LG-E975
Powered By ArT MoD V7 & fuelled by Solid Kernel V1.95
Recovery : TWRP 2.8.4 with MultiROM and MTP
CPU Governer : Intelliactive
CPU Clock Range : 162 to 172800
UnderVolt : 125000
GPU Clock Range : 128 to 487
I/O Scheduler : fiops
Click to expand...
Click to collapse
Will freegee work on my LG E975 kitkat stock rom?
brandolicious said:
Will freegee work on my LG E975 kitkat stock rom?
Click to expand...
Click to collapse
yes.. It will.. Go ahead
Sent From LG-E975
Powered By ArT MoD V7 & fuelled by Solid Kernel V1.95 ?
Recovery : TWRP 2.8.4 with MultiROM and MTP
CPU Governer : Intelliactive
CPU Clock Range : 162 to 172800
UnderVolt : 125000
GPU Clock Range : 128 to 487
I/O Scheduler : fiops
I got the idea now. I choose cwm or twrp then select mako. I read classic installation causes problem is that true?
Is it possible to flash philz on cwm?
Another question:
I want to use this rom [ROM][OFFICIAL][5.1.1][GEEHRC] XenonHD 5.1 Stable [RRO LAYERS]. The ROM Firmware Required is Recovery with SELinux support (latest PhilZ/TWRP). Can I still flash this through philz/cwm?
brandolicious said:
Is it possible to flash philz on cwm?
Another question:
I want to use this rom [ROM][OFFICIAL][5.1.1][GEEHRC] XenonHD 5.1 Stable [RRO LAYERS]. The ROM Firmware Required is Recovery with SELinux support (latest PhilZ/TWRP). Can I still flash this through philz/cwm?
Click to expand...
Click to collapse
Yes you can.. Just download and flash the philz recovery through cwm/twrp..
Sent From LG-E975
Powered By ArT MoD V7 & fuelled by Solid Kernel V1.95 ?
Recovery : TWRP 2.8.4 with MultiROM and MTP
CPU Governer : Intelliactive
CPU Clock Range : 162 to 172800
UnderVolt : 125000
GPU Clock Range : 128 to 487
I/O Scheduler : fiops
Good to know that. Thank you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ThundeRStormS "Galaxy S7/S7edge (SM-G930/935 F/FD) Oreo kernel"
Compatibility notes :
Oreo - Android 8.0.0 STOCK RELEASE odexed/deodexed and ported roms
S7 Stock Oreo ROMs - G930/G935 F/FD and S K W
'I don't use any ported rom so I can't check it'
This kernel is for stock rom odexed/deodexed and ported roms.
(If You want to install ported roms - pls uncheck Priv fix for stock Roms in installation process and select fix for deodexed and ported roms and look at Installation setion in OP)
Kernel looks to works stable on Ported and Deodexed Roms !!!
The kernel use an AROMA installer to help guide you through the installation.
Recommended Apps:
To tweak most of the settings in the kernel, I recommend using Kernel Adiutor by Willi Ye or MTweaks by @morogoku or Smartpack-Kernel Manager.
_________________________________________________
IMPORTANT INFORMATIONS:
1. WARNING: YOU UNDERSTAND THAT INSTALLING CUSTOM FIRMWARE/ROM/KERNEL IS AT YOUR OWN RISK!!!
2. YOUR WARRANTY CAN BE VOID.
"I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this kernel before flashing it! YOU are choosing to make these modifications, and if you point
the finger at me for messing up your device, You can't blame me for this fact."
3. NO REQUESTS!!!
_________________________________________________
KERNEL FEATURES:
- based on stock Samsung kernel U3ERL3
- based on stock Samsung ramdisk S4ESC1 | sepolicy 03.2019
- based on latest ELS source ||3.18.136||
- Flat and Edge support
- aroma installer
- init.d support
- lot of CPU governors
- Conservative governor editable (now You can edit governors values)
- lower than stock's values for big and little CPUs frequencies to 212/130 MHz
- lower than stock's values for GPU frequencies to 112MHz
- lot of I/O schedulers
- TCP : cubic, htcp, reno, bic, westwood, vegas, veno, lia, olia, wvegas
- SELinux status to permissive/enforcing
- disasbled DM-Verity, Knox, RKP, Tima, Rooting Restriction
- Magisk, MTweaks, Smartpack-Kernel Manager
- fixed Private mode for stock's roms by Morogoku
- fixed TWRP 3.2.3-0 by Tkkg1994
- Spectrum support
- ArchPower
- PWM Flicker Free
- CPU voltage control
- standard wakelocks
- Boeffla wakelock control
- Battery settings controls
- ABS clock fixed to 64bit
- GPU Thermal Throttling
- GPU voltage control
- GPU OC to 806 MHz
- F2FS files support
- Fsync control and CRC
- Dynamic Fsync
- Wireguard VPN support
- Moro Sound Drivers
- LED controls with FADE feature
- Support Hotplugs : ALucard, AiO, Zen Decision and AutoSMP - first kernel with this features
..MTweaks do not support all features of hotplugs so all settings are not available to change
..You can do it via file browser and change values in sys files of this module - some parts.
- ZRAM max file is changed to 2,5GB but default is turned OFF.
- Input Boost drivers and control for CPU each core | first kernel with this feature for S7 TW
- Input Boost for CPU | first kernel with this feature for S7 TW
- Fingerprint Boost | first kernel with this feature for S7 TW
- this kernel is not for people who want to get big bentchmark scores, OC, etc.
- this kernel is for daily use for better battery life with good balanced work
What is not included:
- no OC for CPU
- no synapse support
_________________________________________________
INSTALLATION PROCESS:
FOR STOCK ODEX/DEODEX ROMS
FIRST - Clear cache apps like Kernel Adiutor or MTweaks or another one in system app menager !!!
Backup EFS and KERNEL as always in TWRP !!!
Download the latest kernel version zip file
Go to recovery
Flash the kernel zip with root or not
Choose aroma selection | select Private Fix for stocks roms in Installation porcess - odexed roms | select Fix for deodexed and ported roms |
Flash Magisk separately or with Aroma installer
Wipe cache and dalvik/art
Reboot
FOR PORTED ROMS
FIRST - Clear cache apps like Kernel Adiutor or MTweaks or another one in system app menager !!!
Backup EFS and KERNEL as always in TWRP !!!
Download the latest kernel version zip file
Go to recovery
Flash the kernel zip with root or not
Choose aroma selection | for ported roms please uncheck Private Fix for stocks roms in Installation porcess | select Fix for deodexed and ported roms | After installation process flash new BL and CP for lag and 4G signal fix - if You have lags and no signal |
Do not Wipe cache and dalvik/art
Reboot
If You wnat to flash this kernel and have installed another custom kernel like MoRoKernel, or TGP, Arianoxx, You have to clear MTweaks or Kernel Adiutor cache before You install.
If You dont want one of the possibilities for root inside Aroma Installer please choose no root and next flash any root mods manually.
PROBLEMS / BUGS:
For now on ported Roms the kernel is not 100% stable - feedback from some users - We working on it - so please consider this before You flash it on Your device!!!
- SmartView on Sac23 Rom gives reboot
- Random reboots on BlackPearl Rom v6
- Random reboots on Hyper Rom v5.1 ||probably solved by setup HMP values at 700/256||
- Kernel not works properly on Ported Roms | added fix but no 100% sure it works - After installation process flash new BL and CP for lag and 4G signal fix
Thanks for reports.
_________________________________________________
CREDITS AND THANKS:
- The Linux Kernel Archive for the Linux Patches https://www.kernel.org/
- Samsung Open Source Release Center for the Source code http://opensource.samsung.com/
- Project: Exynos-Linux-Stable for updated ELS Linux source codes https://github.com/exynos-linux-stable
- @morogoku for his help and explanation of the compile and configure kernel processing, codes and commits
- @djb77 for his help and explanation of the compile and configure kernel processing, codes and commits
- @Tkkg1994, @francitato02, @Noxxxious, @farovitus, and @mwilky for help, codes and commits
- @osm0sis for Android Image Kitchen and anykernel2 https://forum.xda-developers.com/showthread.php?t=2073775
- Magisk and SuperSu Team for root method
- @ModX81 for new base of ramdisk, CP and BL from Samsung
- Tester : @wille95, @youpeero, @TheesKyr, @cenelyanto, @dodojojo
_________________________________________________
SOURCE of the kernel:
GitHub: https://github.com/ThunderStorms21th/Galaxy-S7-kernel
_________________________________________________
Contributors:
ThundeRStormS Team
_________________________________________________
DISCUSSION:
Telegram Group: Link
_________________________________________________
Version Information:
Statsus : Stable
Current version : 2.3
Release Date : 2019-07-14
--------------------------------------------------------------------------------
DONATION:
If you liked my work, you can collaborate by giving thanks and with some donation to continue working hard.
Thank you very much to all.
DONATION
CHANGELOGS & DOWNLOADS in 2nd post
VIDEO:
Youtube - What is inside the kernel
CHANGELOGS and DOWNLOADS
CHANGELOGS:
Version v2.3
Samsung sources G930FXXU3ERL3
Samsung ramdisk G930FXXS4ESC7
ThunderTweaks 1..0.3
Flat and Edge now supported
Fixed Private Mode (Stock ROMS)
Fixed for ported and deodexed roms | not 100% sure it works
Magisk 18.1 | Unofficial - no stuck in installation process
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.136 ELS
Unlocked big CPU 4 cores to 2600MHz
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 212/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
GPU Freq: 112-806MHz Stock - back again
Added GPU Throttling
Added CPU and GPU voltage control
Added GPU OC to 806MHz
Added Fsync - default turn off
Added CRC - default turn off
Added standard wakelocks
Added Boeflla wakelocks
Added Battery Store and settings control
Added LEDs control with FADE feature - fixed
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Wireguard VPN supported
Possibly Fixed drain battery
Some CPU governors
Lot of I/O Shedulers
HMP settings : 760/240 and some freq chcnages
USB charge to 600MHz in normall mode
USB charge to 900MHz in fast mode
Added VENO, VEGAS to TCP, etc.
Lot of CPU governors | zzmove only works on Big CPU |
Added ArchPower - default turn off
Added PWM Flicker Free - default turn off
F2FS supported
Moro Sound Drivers v2.1.1
Support 11 Spectrum Profiles
Changed CPUs voltage tables for lower power consumption
CPU Boost drivers and control for each core | default disabled | - the first kernel for TW with this feature
CPU Input Touch Boost control | default disabled | The first kernel for TW with this feature
Fingerpring Boost | default enabled | - the first kernel for TW with this feature
Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP | ThunderTweaks support it.
ZRAM max files set at 2,5GB - default OFF
SELinux Permissive
Version v2.2
Samsung sources G930FXXU3ERL3
Samsung ramdisk G930FXXS4ESC7
MTweaks 2.14.0
Flat and Edge now supported
Fixed Private Mode (Stock ROMS)
Fixed for ported and deodexed roms | not 100% sure it works
Magisk 18.1 | Unofficial - no stuck in installation process
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.136 ELS
Unlocked big CPU 4 cores to 2600MHz
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 212/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
GPU Freq: 112-806MHz Stock - back again
Added GPU Throttling
Added CPU and GPU voltage control
Added GPU OC to 806MHz
Added Fsync - default turn off
Added CRC - default turn off
Added standard wakelocks
Added Boeflla wakelocks
Added Battery Store and settings control
Added LEDs control with FADE feature - fixed
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Wireguard VPN supported
Possibly Fixed drain battery
Some CPU governors
Lot of I/O Shedulers
HMP settings : 760/240 and some freq chcnages
USB charge to 600MHz in normall mode
USB charge to 900MHz in fast mode
Added VENO, VEGAS to TCP, etc.
Lot of CPU governors | zzmove only works on Big CPU |
Added ArchPower - default turn off
Added PWM Flicker Free - default turn off
F2FS supported
Moro Sound Drivers v2.1
Changed CPUs voltage tables for lower power consumption
CPU Boost drivers and control for each core | default disabled | - the first kernel for TW with this feature
CPU Input Touch Boost control | default disabled | - the first kernel for TW with this feature
Fingerpring Boost | default enabled | - the first kernel for TW with this feature
Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP | MTweaks don't support some settings yet but will be in the future - thx to Moro.
ZRAM max files set at 2,5GB - default OFF
SELinux Permissive
Version v2.1
Samsung sources G930FXXU3ERL3
Samsung ramdisk G930FXXS4ESC7
MTweaks 2.14.0
Removed Smartpack-Kernel Manager v7.5
Flat and Edge now supported
Fixed Private Mode (Stock ROMS)
Fixed for ported and deodexed roms | not 100% sure it works
Magisk 18.1 | Unofficial - no stuck in installation process
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.136 ELS
Unlocked big CPU 4 cores to 2600MHz
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 212/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
GPU Freq: 112-806MHz Stock - back again
Added GPU Throttling
Added CPU and GPU voltage control
Added GPU OC to 806MHz
Added Fsync - default turn off
Added CRC - default turn off
Added standard wakelocks
Added Boeflla wakelocks
Added Battery Store and settings control
Added LEDs control with FADE feature - fixed
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Wireguard VPN supported
Possibly Fixed drain battery
Some CPU governors
Lot of I/O Shedulers
HMP settings : 760/240 and some freq chcnages
USB charge to 600MHz in normall mode
USB charge to 900MHz in fast mode
Added VENO, VEGAS to TCP, etc.
Lot of CPU governors | zzmove only works on Big CPU |
Added ArchPower - default turn off
Added PWM Flicker Free - default turn off
F2FS supported
Moro Sound Drivers v2.1
Changed CPUs voltage tables for lower power consumption
CPU Boost drivers and control for each core | default disabled | - the first kernel for TW with this feature
CPU Input Touch Boost control | default disabled | - the first kernel for TW with this feature
[*]Fingerpring Boost | default enabled | - the first kernel for TW with this feature
SELinux Permissive
Version v2.0
Samsung sources G930FXXU3ERL3
Samsung ramdisk G930FXXS4ESC7
MTweaks 2.14.0
Removed Smartpack-Kernel Manager v7.5
Flat and Edge now supported
Fixed Private Mode (Stock ROMS)
Fixed for ported and deodexed roms | not 100% sure it works
Magisk 18.1 | Unofficial - no stuck in installation process
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.136 ELS
Unlocked big CPU 4 cores to 2600MHz
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 212/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
GPU Freq: 112-806MHz Stock
Added GPU Throttling
Added CPU and GPU voltage control
Added GPU OC to 806MHz
Added Fsync - default turn off
Added CRC - default turn off
Added standard wakelocks
Added Boeflla wakelocks
Added Battery Store and settings control
Added LEDs control with FADE feature
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Wireguard VPN supported
Possibly Fixed drain battery
Some CPU governors
Lot of I/O Shedulers
HMP settings : 760/240 and some freq chcnages
USB charge to 600MHz in normall mode
USB charge to 900MHz in fast mode
Added VENO, VEGAS to TCP, etc.
Lot of CPU governors | zzmove only works on Big CPU |
Added ArchPower - default turn off
Added PWM Flicker Free - default turn off
F2FS supported
Moro Sound Drivers v2.1
Changed CPUs voltage tables for lower power consumption
CPU Boost drivers and control for each core | default disabled | - the first kernel for TW with this feature
CPU Input Touch Boost control | default disabled | - the first kernel for TW with this feature
[*]Fingerpring Boost | default enabled | - the first kernel for TW with this feature
SELinux Permissive
Version v1.9
Samsung sources G930FXXU3ERL3
Samsung ramdisk G930FXXS4ESC1
MTweaks 2.14.0
Smartpack-Kernel Manager v7.5
Flat and Edge now supported
Fixed Private Mode (Stock ROMS)
Fixed for ported and deodexed roms | not 100% sure it works
Magisk 18.1 | Unofficial - no stuck in installation process
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.136 ELS
Unlocked big CPU 4 cores to 2600MHz
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 212/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 416/338 MHz
GPU Freq: 112-806MHz Stock
Added GPU Throttling
Added CPU and GPU voltage control
Added GPU OC to 806MHz
Added Fsync - default turn off
Added CRC - default turn off
Added standard wakelocks
Added Boeflla wakelocks
Added Battery Store and settings control
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Wireguard VPN supported
Possibly Fixed drain battery
Some CPU governors
Lot of I/O Shedulers
HMP settings : 760/240 and some freq chcnages
USB charge to 600MHz in normall mode
USB charge to 900MHz in fast mode
Added VENO, VEGAS to TCP, etc.
Lot of CPU governors | zzmove only works on Big CPU |
Added ArchPower - default turn on
Added PWM Flicker Free - default turn off
F2FS supported
Moro Sound Drivers v2.1
CPU Boost drivers and control for each core | default disabled | - the first kernel for TW with this feature
CPU Input Touch Boost control | default disabled | - the first kernel for TW with this feature
Fingerpring Boost | default enabled | - the first kernel for TW with this feature
SELinux Permissive
Version v1.8
Samsung sources G930FXXU3ERL3
Samsung ramdisk G930FXXS4ESC1
MTweaks 2.13
Smartpack-Kernel Manager v7.5
Flat and Edge now supported
Fixed Private Mode (Stock ROMS)
Fixed for ported and deodexed roms | not 100% sure it works
Magisk 18.1 | Unofficial - no stuck in installation process
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.136 ELS
Unlocked big CPU 4 cores to 2600MHz
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 416/338 MHz
GPU Freq: 112-806MHz Stock
Added GPU Throttling
Added CPU and GPU voltage control
Added GPU OC to 806MHz
Added Fsync - default turn off
Added CRC - default turn off
Added standard wakelocks
Added Boeflla wakelocks
Added Battery Store and settings control
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Wireguard VPN supported
Possibly Fixed drain battery
Some CPU governors
Lot of I/O Shedulers
HMP settings : 760/240 and some freq chcnages
USB charge to 700MHz in normall mode
USB charge to 900MHz in fast mode
Added VENO, VEGAS to TCP, etc.
Lot of CPU governors | zzmove only works on Big CPU |
Added ArchPower - default turn on
Added PWM Flicker Free - default turn off
F2FS supported
Moro Sound Drivers
CPU Boost drivers and control for each core | default disabled | - the first kernel for TW with this feature
CPU Input Touch Boost control | default disabled | - the first kernel for TW with this feature
Fingerpring Boost | default enabled | - the first kernel for TW with this feature
SELinux Permissive
Version v1.7
Samsung sources G930FXXU3ERL3
Samsung ramdisk G930FXXS4ESSB
MTweaks 2.13
Flat and Edge now supported
Fixed Private Mode (Stock ROMS)
Fixed for ported and deodexed roms | not 100% sure it works
Magisk 18.1 | Unofficial - no stuck in installation process
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.136 ELS
Unlocked big CPU 4 cores to 2600MHz
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
CPU Freq setup : Higher Freq 2080/1378 MHz and Low Freq at 416/338 MHz
GPU Freq: 112-650MHz Stock
Added GPU Throttling
Added CPU and GPU voltage control
Removed GPU voltage control
Added Fsync - default turn off
Added CRC - default turn off
Added standard wakelocks
Added Battery Store control
Removed LED and Battery control
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Wireguard VPN supported
Possibly Fixed drain battery
Some CPU governors
Lot of I/O Shedulers
HMP settings : 760/240 and some freq chcnages
USB charge to 700MHz in normall mode
USB charge to 900MHz in fast mode
Added VENO, VEGAS to TCP, etc.
Lot of CPU governors | zzmove only works on Big CPU |
Added ArchPower - default turn on
Added PWM Flicker Free - default turn off
F2FS supported
Moro Sound Drivers
CPU Boost drivers and control for each core
SELinux Permissive
Version v1.6
Samsung sources G930FXXU3ERL3
Samsung ramdisk G930FXXS4ESSB
MTweaks 2.13
Flat and Edge now supported
Fixed Private Mode (Stock ROMS)
Fixed for ported and deodexed roms | not 100% sure it works
Magisk 18.1 | Unofficial - no stuck in installation process
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.136 ELS
Unlocked big CPU 4 cores to 2600MHz
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
CPU Freq setup : Higher Freq 2080/1378 MHz and Low Freq at 416/338 MHz
GPU Freq: 112-650MHz Stock
Added GPU Throttling
Added CPU voltage control
Removed GPU voltage control
Added Fsync - default turn off
Added CRC - default turn off
Added standard wakelocks
Added Battery Store control
Removed LED and Battery control
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Wireguard VPN supported
Possibly Fixed drain battery
Some CPU governors
Lot of I/O Shedulers
HMP settings : 760/240 and some freq chcnages
USB charge to 700MHz in normall mode
USB charge to 900MHz in fast mode
Added VENO, VEGAS to TCP, etc.
Lot of CPU governors
Added ArchPower - default turn on
Added PWM Flicker Free - default turn off
F2FS supported
Moro Sound Drivers
SELinux Permissive
Version v1.5
Samsung sources G930FXXU3ERL3
Samsung ramdisk G930FXXU3ESA2
MTweaks 2.13
Flat and Edge now supported
Fixed Private Mode (Stock ROMS)
Fixed for ported and deodexed roms | not 100% sure it works
Magisk 18.1 | Unofficial - no stuck in installation process
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.136 ELS
Unlocked big CPU 4 cores to 2600MHz
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
CPU Freq setup : Higher Freq 2080/1378 MHz and Low Freq at 416/338 MHz
GPU Freq: 112-650MHz Stock
Added GPU Throttling
Added CPU voltage control
Removed GPU voltage control
Added Fsync - default turn off
Added CRC - default turn off
Added standard wakelocks
Added Battery Store control
Removed LED and Battery control
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Wireguard VPN supported
Possibly Fixed drain battery
Some CPU governors
Lot of I/O Shedulers
HMP settings : 760/240 and some freq chcnages
USB charge to 700MHz in normall mode
USB charge to 900MHz in fast mode
Added VENO, VEGAS to TCP, etc.
Lot of CPU governors
Added ArchPower - default turn on
Added PWM Flicker Free - default turn off
F2FS supported
SELinux Permissive
Version v1.4.1
Samsung sources G930FXXU3ERL3
Samsung ramdisk G930FXXU3ESA2
Flat and Edge now supported
Fixed Private Mode (Stock ROMS)
Fixed freq's of CPU
Magisk 18.1 | Unofficial - no stuck in installation process
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.134 ELS
Version v1.4
Samsung sources G930FXXU3ERL3
Samsung ramdisk G930FXXU3ESA2
Flat and Edge now supported
Fixed Private Mode (Stock ROMS)
VM, VNSWAP : some settings v.1.2
Magisk 18.1 | Install Magisk separately after flashed kernel
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.134 ELS
Unlocked big CPU 4 cores to 2600MHz
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
CPU Freq setup : Higher Freq 2080/1586 MHz and Low Freq at 416/338 MHz
GPU Freq: 112-650MHz Stock
Added GPU Throttling
Added CPU and GPU voltage control
Added Fsync - default turn off
Added CRC - default turn off
Added standard wakelocks
Added LED and Battery control
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles not supported
Wireguard VPN not supported
Possibly Fixed drain battery
Some CPU governors
Lot of I/O Shedulers
HMP settings : 700/256 and some freq chcnages
USB charge to 800MHz in normall mode
USB charge to 900MHz in fast mode
Added VENO, VEGAS to TCP, etc.
Lot of CPU governors
Added ArchPower - default turn on
Added PWM Flicker Free - default turn off
F2FS not supported
SELinux Permissive
Version v1.3 - ONLY FOR TEST - NOT STABLE : after installation process in 1st restart the phone You can get one or two reboots in first minutes of work, next looks like be stable.
Samsung sources G930FXXU3ERL3
Samsung ramdisk G930FXXU3ERL3
Flat and Edge now supported
Fixed Private Mode (Stock ROMS)
VM, VNSWAP : some settings v.1.1
Magisk 18.1 unofficial because official gives stuck on installation process
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.134 ELS
Unlocked big CPU 4 cores to 2600MHz
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
CPU Freq setup : Higher Freq 2080/1586 MHz and Low Freq at 416/338 MHz
GPU Freq: 112-650MHz Stock
Added GPU Throttling
Compiler : aarch64-linux-android-4.9
Spectrum and profiles not supported
Wireguard VPN not supported
Possibly Fixed drain battery
Some CPU governors
Some of I/O Shedulers : noop and cfq
HMP settings : 700/256 and some freq chcnages
USB charge to 800MHz in normall mode
USB charge to 900MHz in fast mode
Added VENO, VEGAS to TCP
Added CONSERVATIVE governor for edit
Added CONSERVATIVE, POWERSAVE and ONDEMAND governors
Added ArchPower
Added PWM Flicker Free - default turn on
F2FS not supported
SELinux Permissive
Version v1.2
Samsung sources G930FXXU3ERL3
Samsung ramdisk G930FXXU3ERL3
Flat and Edge now supported
Fixed Private Mode (Stock ROMS)
VM, VNSWAP : some settings v.1.1
Magisk 18.1 unofficial because official gives stuck on installation process
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.133 ELS
Unlocked big CPU 4 cores to 2600MHz
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
CPU Freq setup : Higher Freq 2080/1586 MHz and Low Freq at 416/338 MHz
GPU Freq: 112-650MHz Stock
Added GPU Throttling
Compiler : aarch64-linux-android-4.9
Spectrum and profiles not supported
Wireguard VPN not supported
Possibly Fixed drain battery
Some CPU governors
Some of I/O Shedulers : noop and cfq
HMP settings : 880/340 and some freq chcnages
USB charge to 800MHz in normall mode
USB charge to 900MHz in fast mode
Added VENO, VEGAS to TCP
Added CONSERVATIVE governor for edit
Added CONSERVATIVE, POWERSAVE and ONDEMAND governors
Added ArchPower
Added PWM Flicker Free
F2FS not supported
SELinux Permissive
Version v1.1
Samsung sources G930FXXU3ERL3
Samsung ramdisk G930FXXU3ERL3
Flat and Edge now supported
Fixed Private Mode (Stock ROMS)
VM, VNSWAP : some settings v.1.1
Magisk 18.1 unofficial because official gives stuck on installation process
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.133 ELS
Unlocked big CPU 4 cores to 2600MHz
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
CPU Freq setup : Higher Freq 2080/1586 MHz and Low Freq at 416/338 MHz
GPU Freq: 112-650MHz Stock
Added GPU Throttling
Compiler : aarch64-linux-android-4.9
Spectrum and profiles not supported
Wireguard VPN not supported
Possibly Fixed drain battery
Some CPU governors
Some of I/O Shedulers : noop and cfq
HMP settings : 880/340 and some freq chcnages
USB charge to 800MHz in normall mode
USB charge to 900MHz in fast mode
Added VENO, VEGAS to TCP
Added CONSERVATIVE governor for edit
Added CONSERVATIVE, POWERSAVE and ONDEMAND governors
Added ArchPower
F2FS not supported
SELinux Permissive
Version v1.0
Samsung sources G930FXXU3ERL3
Samsung ramdisk G930FXXU3ERL3
Only Flat supported
Almost stock kernel features
VM, VNSWAP : some settings v1.0
Fixed Private Mode (Stock ROMS)
MTweaks 2.12.6
Magisk 18.1 unofficial
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.133 ELS
Unlocked big CPU 4 cores to 2600MHz
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
CPU Freq setup : Higher Freq 2080/1586 MHz and Low Freq at 416/338 MHz
GPU Freq: 260-650MHz Stock
Stable, NO RANDOM REBOOTS
Compiler : aarch64-linux-android-4.9
Spectrum and profiles not supported
Wireguard VPN not supported
Possibly Fixed drain battery
Some CPU governors
Some of I/O Shedulers : noop and cfq
HMP settings : 800/300 and some freq chcnages
USB charge to 800MHz in normall mode
USB charge to 900MHz in fast mode
Added VENO, VEGAS to TCP
Added CONSERVATIVE governor for edit
Added CONSERVATIVE, POWERSAVE and ONDEMAND governors
F2FS not supported
SELinux Permissive
INITIAL RELEASE
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DOWNLOADS:
ThundeRStormS kernel v2.3 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v2.2 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v2.1 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v2.0 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.9 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.8 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.7 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.6 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.5 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.4.1 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.4 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.3 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE| - ONLY FOR TEST - NOT STABLE
ThundeRStormS kernel v1.2 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.1 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.0 : GoogleDrive or androidfilehost |ONLY FOR S7 FLAT|
------------------------------------------------------------------------------------------------------------------
ThunderTweaks
ThunderTweaks is an app based on Kernel Adiutor Willi Ye next modded by MoRoGoKu (MTweaks) and Corsicanu (hKTweaks).
Big thx for them.
ThunderTweaks v1.0.3 :
- added full support for new AotoSMP hotplug adaptated to Exynos 8890 by ThundeRStormS team
- added fix for settings max ZRAM disk size up to 4GB
- added new ThundeRStormS Spectrum Profile and support now 11 spectrum's profiles
- added full support for BluPlug, ClusterPlug, ThundrPlug, AlucartPlug.
ThunderTweaks v1.0.0 :
- based on hKTweaks v1.1.5
- added full support for new AotoSMP hotplug adaptated to Exynos 8890 by ThundeRStormS team
- added fix for settings max ZRAM disk size up to 4GB
- added new ThundeRStormS Spectrum Profile and support now 5 spectrum's profiles
- first ThundeRStormS Kernel Manager
SOURCE:
https://github.com/ThunderStorms21th/ThunderTweaks
DOWNLOAD:
ThunderTweaks v1.0.0 : GoogleDrive | FOR S7 FLAT / EDGE |
ThunderTweaks v1.0.3 : GoogleDrive | FOR S7 FLAT / EDGE |
Hello, to be sure. Only for stock roms?
SM-G965F cihazımdan Tapatalk kullanılarak gönderildi
yes, only for stock rom...means no ported roms.
interesting i'm try it
update: all working great. seems to be good in battery life thanks to the cpu low freq 338mhz.
please can you add AMOLED PWM Flicker-Free fix
pixiebob said:
interesting i'm try it
update: all working great. seems to be good in battery life thanks to the cpu low freq 338mhz.
please can you add AMOLED PWM Flicker-Free fix
Click to expand...
Click to collapse
Hi, nice to hear that news
I think I can and I will add GPU Throtlling too for more battery save so will be available in MTweaks or Kernel Adriutor.
I think will be in v1.1 soon.
nalas said:
Hi, nice to hear that news
I think I can and I will add GPU Throtlling too for more battery save so will be available in MTweaks or Kernel Adriutor.
I think will be in v1.1 soon.
Click to expand...
Click to collapse
i follow you :good:
Witch ROM do you use?
Im on Civz latest.
Wysłane z mojego SM-G930F przy użyciu Tapatalka
I don't think that is a big difference from 338mhz to 700mhz for bigCore based on what i saw on MoroKernel Uv table. Or it is???
can you make it work for edge too ?
king118 said:
I don't think that is a big difference from 338mhz to 700mhz for bigCore based on what i saw on MoroKernel Uv table. Or it is???
Click to expand...
Click to collapse
Look pls at my CPU usage at 416 and 338 MHz in normal use this will be at 442 an 728 MHz so for me is difference not very big but it is....always some more voltage [emoji3]
As I wrote before - I want to make a kernel battery friendly - not for OC, geeks scores, etc. - another devs like @morogoku , @Arianoxx and @djb77 made it better and very good.
I want focus only at battery usage and good for daily use with good balanced work bcose are some people who's not play in games only use S7 for work and normal use - and don't want hot and not battery friendly Oreo.
...with Your help maybe we can do more in this case .... bad battery life in Oreo Android system.
HaohanWendy said:
can you make it work for edge too ?
Click to expand...
Click to collapse
I will try to do - but I think I will not make new thread on XDA S7 edge profile - so will be only in this thread.
...heheh I have a little question to You people....
Do You see a banner at top on this Thread?
On mine PC I don.t see.
Thx for help.
nalas said:
Look pls at my CPU usage at 416 and 338 MHz in normal use this will be at 442 an 728 MHz so for me is difference not very big but it is....always some more voltage [emoji3]View attachment 4700409
As I wrote before - I want to make a kernel battery friendly - not for OC, geeks scores, etc. - another devs like @morogoku , @Arianoxx and @djb77 made it better and very good.
I want focus only at battery usage and good for daily use with good balanced work bcose are some people who's not play in games only use S7 for work and normal use - and don't want hot and not battery friendly Oreo.
...with Your help maybe we can do more in this case .... bad battery life in Oreo Android system.
Click to expand...
Click to collapse
I will try the lower freq. As for 1 day usage tje kernel seems good. Keep up with the work!
I suggest if you want to use westwood for TCP because it's the most stable i don't know if others are so good.
Also you can check this link
https://androidmodguide.blogspot.com/p/io-schedulers.html?m=1
---------- Post added at 09:01 PM ---------- Previous post was at 08:43 PM ----------
Also due to GCC toolChain V4.9 kernel may autoreboot(1 had one).Which version Moro use?
king118 said:
I will try the lower freq. As for 1 day usage tje kernel seems good. Keep up with the work!
I suggest if you want to use westwood for TCP because it's the most stable i don't know if others are so good.
Also you can check this link
https://androidmodguide.blogspot.com/p/io-schedulers.html?m=1
---------- Post added at 09:01 PM ---------- Previous post was at 08:43 PM ----------
Also due to GCC toolChain V4.9 kernel may autoreboot(1 had one).Which version Moro use?
Click to expand...
Click to collapse
Hi.
I will try to add maybe westwood or another too, but i don't want add too much.
after use linaro 4.9 for compile i never got random reboot.
nalas said:
Hi.
I will try to add maybe westwood or another too, but i don't want add too much.
after use linaro 4.9 for compile i never got random reboot.
Click to expand...
Click to collapse
It has westwood already :victory:
Then it is because of the rom i use, maybe ramdisk missmatch
Update to TS v1.1
Hello,
The kernel updated :
- added ArchPower
- added support for S7 edge
- added GPU thermal throttling
- added lower freq for GPU to 112 MHz (now freq range is 112-650 MHz for GPU)
Look please at post 1 and 2.
Regards
ThundeRStormS Team
king118 said:
It has westwood already :victory:
Then it is because of the rom i use, maybe ramdisk missmatch
Click to expand...
Click to collapse
aha yes, heheh stock has too westwood so it is
Encryption
Hello,
I'm looking at this kernel and it's very interesting. I have one little question, is it encryption proof or do I need to flash a zip to remove encryption etc?
youpeero said:
Hello,
I'm looking at this kernel and it's very interesting. I have one little question, is it encryption proof or do I need to flash a zip to remove encryption etc?
Click to expand...
Click to collapse
If you have flashed moded twrp 3.2.3.0 by tkkg so you dont have to. In aroma you can flash it.
Wysłane z mojego SM-G930F przy użyciu Tapatalka