Related
Hello everyone, I have recently bought a galaxy s4 mini GT-I9195 and i want to flash a custom kernel like this one here: http://forum.xda-developers.com/showthread.php?t=2636890 ... First, do I have to check if my bootloader is locked or unlocked? Or i just flash it via Odin rightaway? Yesterday I rooted it using CF-Auto-Root.. Please, if anyone can help me out, i would really appreciate it because i have no experience on flashing on sammy devices and i am reeally confused :crying:.. I have been searching like the WHOLE internet to find a solution but came up with nothing.. Thanks in advance :laugh:
Panos97 said:
Hello everyone, I have recently bought a galaxy s4 mini GT-I9195 and i want to flash a custom kernel like this one here: http://forum.xda-developers.com/showthread.php?t=2636890 ... First, do I have to check if my bootloader is locked or unlocked? Or i just flash it via Odin rightaway? Yesterday I rooted it using CF-Auto-Root.. Please, if anyone can help me out, i would really appreciate it because i have no experience on flashing on sammy devices and i am reeally confused :crying:.. I have been searching like the WHOLE internet to find a solution but came up with nothing.. Thanks in advance :laugh:
Click to expand...
Click to collapse
You must flash thru recovery.
Here the installation steps, but first you must flash a custom recovery like this or other, its up to you.
Installation instructions
- Copy f4ktion_1.4.0-xxx.zip to your SDCARD
- Reboot into CWM recovery
- Choose "Install zip from sdcard"
- Select f4ktion_1.4.0-xxx.zip kernel and confirm installation.
Click to expand...
Click to collapse
R_a_z_v_a_n said:
You must flash thru recovery.
Here the installation steps, but first you must flash a custom recovery like this or other, its up to you.
Click to expand...
Click to collapse
Thank you so much So all i have to do is flash the recovery in Odin.. But since my s4 mini is rooted, do i have to install the S4Mini_RootKit_V2.zip?? i mean if I do, will it conflict with the SuperSU i have previously installed on my device? Or just overwrite it and work like a charm? Sorry I'm asking like too many questions, but since i'm new here i need some guidance
Btw, how do i know if my bootloader is unlocked? Before I buy this s4 mini i owned an Xperia go and to install a kernel i had to unlock the BL.. I don't know if the same thing applies for sammy devices, just asking:angel:
Panos97 said:
Thank you so much So all i have to do is flash the recovery in Odin.. But since my s4 mini is rooted, do i have to install the S4Mini_RootKit_V2.zip?? i mean if I do, will it conflict with the SuperSU i have previously installed on my device? Or just overwrite it and work like a charm? Sorry I'm asking like too many questions, but since i'm new here i need some guidance
Btw, how do i know if my bootloader is unlocked? Before I buy this s4 mini i owned an Xperia go and to install a kernel i had to unlock the BL.. I don't know if the same thing applies for sammy devices, just asking:angel:
Click to expand...
Click to collapse
No, we have bootloader unlocked, so you don't need to unlock anything.
No, try with this recovery if you afraid to not doing some conflicts:
[i919x][CWM Advanced Edition] PhilZ Touch
Download philz_touch_6.07.9-serranoltexx.tar.md5
boot into download mode
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
normally, phone should auto-reboot into recovery.
If it reboots into main system and your recovery remains stock, repeat above steps and untick "autoreboot" in odin. Once flash is done, keep pressing the 3 buttons combo to for a reboot into recovery.You should see the new CWM
when in recovery, if you choose option "reboot system now" and you get "yes - disable flash recovery", select that option to avoid stock recovery overwriting cwm
Click to expand...
Click to collapse
R_a_z_v_a_n said:
No, we have bootloader unlocked, so you don't need to unlock anything.
No, try with this recovery if you afraid to not doing some conflicts:
[i919x][CWM Advanced Edition] PhilZ Touch
Click to expand...
Click to collapse
So after i install the philz touch recovery, can i install ths deodexed rom http://www.s4miniarchive.com/2014/04/deodexed-and-rooted-stock-for-galaxy-s4-mini.html which comes with a custom kernel (vikinger)? will there be a problem with it because the rom is based on BML1 and my current fw is BNB3? thank you very much :silly:
Panos97 said:
So after i install the philz touch recovery, can i install ths deodexed rom http://www.s4miniarchive.com/2014/04/deodexed-and-rooted-stock-for-galaxy-s4-mini.html which comes with a custom kernel (vikinger)? will there be a problem with it because the rom is based on BML1 and my current fw is BNB3? thank you very much :silly:
Click to expand...
Click to collapse
Really, i don't know for sure, BUT in my previous phone (S Advance I9070) i have some errors when i flashed different baseband deodexed.
Make a nandroid backup after you have custom recovery, and you can try it. If something going wrong, restore your backup and all will just like before.
R_a_z_v_a_n said:
Really, i don't know for sure, BUT in my previous phone (S Advance I9070) i have some errors when i flashed different baseband deodexed.
Make a nandroid backup after you have custom recovery, and you can try it. If something going wrong, restore your backup and all will just like before.
Click to expand...
Click to collapse
Ok then! I will try and see, maybe sometime after i try doing it, i will post here how it went.. Thank you very much for being so kind as to answering all my noob-full questions :silly: :good:
If you flash a custom recovery your device's Knox counter will be triggered to 0x1
I just got me an galaxy s3 today and as soon as i got it i tried to root it
I failed horribly
I think im bricked I tried to flash a custom rom it failed and now i cant boot
I do have TWRP installed and i did do a backup
I restored my backup and now it just sits at the att logo
Any help is appreciated!
(I can still access twrp and download mode)
That is good. It is not bricked
rrupert said:
That is good. It is not bricked
Click to expand...
Click to collapse
Thanks for the quick reply what can i do to fix this rrupert
For me, being fairly new, was to use the CyanogenMod installer. It does all the work for you, then you can flash whatever Rom you like.
rrupert said:
For me, being fairly new, was to use the CyanogenMod installer. It does all the work for you, then you can flash whatever Rom you like.
Click to expand...
Click to collapse
Ill try. Thanks for the help. ill tell you if it works...(fingers crossed!)
stormdude124 said:
Ill try. Thanks for the help. ill tell you if it works...(fingers crossed!)
Click to expand...
Click to collapse
actually I want to go stock and be done with it
Can you help me find a 4.3 TWRP flashable zip please? @rrupert
stormdude124 said:
actually I want to go stock and be done with it
Can you help me find a 4.3 TWRP flashable zip please? @rrupert
Click to expand...
Click to collapse
I suggest you to use Odin to restore stock Rom from www.sammobile.com
When it's done, root again and reinstall custom recovery.
DON'T EVER TRY TO DOWGRADE
I fixed it I found a thread that had JB 4.3 flashable zip because that's what came with my phone thanks for the help everyone back to sgh-i927 thread I'm a Dev and help people there
Hello Mates!
Since there is hardly any detailed guide as to how to Root, Flashing custom kernel & Recovery I decided to make a detailed guide that might help you.
Disclaimer:
Following this will void your warranty
This method will trip Knox and Samsung pay may not work (Until some Dev might come up with better method)
The steps mentioned here are was tested but in case if it didn't work I or the developers take no responsibility so use it on your own risk
Click to expand...
Click to collapse
Prerequisites
Odin v3.10.7
USB Drivers
Phil Recovery & Arter97 Kernal or TWRP Recovery
Super SU
Supported Devices:
g920fi
g920skl
g920tw8
g925fi
g925skl
g925tw8
g928fci (You can flash this on Indian firmware as well)
g928skl
g928tw8
So let's start
Backup your device before following this guide
First download and install the USB driver from the above link
Download Odin and unpack to a folder
Download Phil Recovery from Arter97 Kernel thread (recommended)
Download Arter97 Kernel & SuperSU and copy them to your device
Enable Developers option in your phone
Go to Settings -> Above device ->Software Info and tap on Build number 10 times to enable Developers Mode
Then Go to Settings & Developers option and Make sure "USB Debugging" is enabled & "OEM Unlock" is enabled
Flashing Recovery:
Now let's reboot the device into Download Mode
Power off the device.
Press Volume Down + Home + Power button at the same time and hold them.
Now open Odin and connect your device to your PC (Sometimes it might take some time for the Odin to detect the device)
Once Odin detects your device choose AP button and select the recovery file you downloaded (File name with extension .tar.md5)
Now go to the options tab and make sure everything else is unchecked expect F. Reset Time
Now click on Start to Flash the custom recovery
Once it's completed your see "PASS" in a green box on top left corner of Odin
Congratulations! You have successfully flashed your Custom Recovery
Flashing Kernel & Rooting
Now let's reboot the device in Recovery mode
Holding Power +Volume Up+ Home key for a couple of seconds.
Once you are in Recovery it's recommend to take a backup
Now Flash the Kernel (It will remove Knox)
Once you Flashed the Kernel, Flash SuperSU
Congratulations! You have successfully rooted your device.
You are facing any issues? Please post your question so I or one of our community members will help you out.
Update:
For Android Marshmallow you could use Chainfire's CF Root. For SM-G928C visit https://autoroot.chainfire.eu/ or download it from here
Also you could check Dr. Ketan's Root and Deep sleep fix guide: here
Update 27th March 2016:
Seems like the some of the root methods out there is hit and miss like CF Auto Root etc. But seems like lot of people reported rooting with SkyHigh Kernel seems to working.
SkyHigh Kernel
@ShyamSasi
That's brilliant...it will help a lot of people out and stop a lot of silly questions lol. Now only for some Roms or deodexed stock lol for xposed.
Sent from my SM-G928F using Tapatalk
nice write up. you might want to note that after the recovery is flashed. do not reboot the device system. i did it twice on accident and both times, because after the flash, it stays in download mode. the system re-installed the stock recovery. so what i did was hold: vol down, home and power to reboot back into download mode then from there i hit vol up to cancel. then as soon as the phone is about to reboot, i did the: vol up + home + power button combo to boot into the new recovery. *my phone didn't let me boot into recovery from download mode.
tatoo069sv said:
@ShyamSasi
That's brilliant...it will help a lot of people out and stop a lot of silly questions lol. Now only for some Roms or deodexed stock lol for xposed.
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
Thank you
swift2fly said:
nice write up. you might want to note that after the recovery is flashed. do not reboot the device system. i did it twice on accident and both times, because after the flash, it stays in download mode. the system re-installed the stock recovery. so what i did was hold: vol down, home and power to reboot back into download mode then from there i hit vol up to cancel. then as soon as the phone is about to reboot, i did the: vol up + home + power button combo to boot into the new recovery. *my phone didn't let me boot into recovery from download mode.
Click to expand...
Click to collapse
Yes I understand. That's why I asked you uncheck everything from Odin i.e. Auto reboot option. Thanks for the tip. I'm sure this will help out.
i have this model they are not root yet ??
Edge+ Model SM-G928G
Does it work with the Canadian g928w8. Thanks much.
ShyamSasi said:
Thank you
Yes I understand. That's why I asked you uncheck everything from Odin i.e. Auto reboot option. Thanks for the tip. I'm sure this will help out.
Click to expand...
Click to collapse
i had Auto Reboot un-checked. so after the flash it just stays on download mode. therefore i did the steps that i had previously mentioned.
x.Orville.x said:
i have this model they are not root yet ??
Edge+ Model SM-G928G
Click to expand...
Click to collapse
I have G928G model and I used g928fci to root.
flutos said:
Does it work with the Canadian g928w8. Thanks much.
Click to expand...
Click to collapse
I'm not sure mate, seems like it's not listed. Browse around the kernel thread to see if anyone has reported flashing a compatible kernel.
swift2fly said:
i had Auto Reboot un-checked. so after the flash it just stays on download mode. therefore i did the steps that i had previously mentioned.
Click to expand...
Click to collapse
Ah alright. Thanks for sharing it.
Is SM-928F supported?
ShyamSasi said:
I have G928G model and I used g928fci to root.
(...)
Ah alright. Thanks for sharing it.
Click to expand...
Click to collapse
Same here. G928G model (Brazil, not India, different basebands), seems to work perfectly with F, C and I version.
sergio.custodio said:
Same here. G928G model (Brazil, not India, different basebands), seems to work perfectly with F, C and I versions.
Click to expand...
Click to collapse
Thanks!
Is possible used The same method to root s6 edge+ that s6 edge normal?
guta12 said:
Is possible used The same method to root s6 edge+ that s6 edge normal?
Click to expand...
Click to collapse
I don't believe so. So far the research I did S6 Edge could use a app to root but that doesn't support Android 5.1.1 version. Until they support 5.1.1 we have to use this method.
guta12 said:
Is possible used The same method to root s6 edge+ that s6 edge normal?
Click to expand...
Click to collapse
i can confirm that the steps are the same for the s6 edge, the kernel and required files are different. Just search and you will find it. I know this because i previously had the s6 edge (international) on 5.1.1
So this question sounds kinda dumb for me...
With this method I can root my SM-G928F right?
Does it wipe my phone?
Sorry for those questions but it's my first Samsung Phone.
-Lychee
xLychee said:
So this question sounds kinda dumb for me...
With this method I can root my SM-G928F right?
Does it wipe my phone?
Sorry for those questions but it's my first Samsung Phone.
-Lychee
Click to expand...
Click to collapse
Yes! It will root G928F.
No, it will not wipe the phone.
Thank you very much, then I will proceed and enjoy my adblocker again.
Another quite dumb question: Is F928fci the right kernel version / recovery for my device?
-Lychee
EDIT: Yes it is, reading helps alot.
is there anything for the mac?
JazzyStahh said:
is there anything for the mac?
Click to expand...
Click to collapse
There is Odin version ported for MAC http://forum.xda-developers.com/showthread.php?t=2598203 but I am not sure if it's compatible with Edge+
ShyamSasi said:
I have G928G model and I used g928fci to root.
I'm not sure mate, seems like it's not listed. Browse around the kernel thread to see if anyone has reported flashing a compatible kernel.
Ah alright. Thanks for sharing it.
Click to expand...
Click to collapse
Wherw i can find it i can see it
Sent from my SM-G928G using Tapatalk
Hello all.
So, as a noob, I rooted my tab S successfully and was playing around with the TWRP recovery settings and accidentally deleted my OS. I was able to flash a stock version of Android but now it is stuck in a loop and I have no way of getting it past the loading screen. I am able to access the download mode but I can get no further than that. Is there anyway that you can help me with resetting my device? Could any of you also link me to a thread which can help me unroot my tab so that I can reroot it using CF auto root with TWRP recovery mode installed?
That would be greatly appreciated. Thanks.
My model number is: SM-T800NZWAXAR
Wipe Data then flash again, wait at least 10 mins for for first boot.
We flashed tamirda's phoenix rom. I can't even explain the whole process because my cousin helped us out with that, but thanks!!!
Zwhlol-Zniper said:
We flashed tamirda's phoenix rom. I can't even explain the whole process because my cousin helped us out with that, but thanks!!!
Click to expand...
Click to collapse
Flash the required custom ROM, or reflash the stock rom
tra_dax
tra_dax said:
Flash the required custom ROM, or reflash the stock rom
tra_dax
Click to expand...
Click to collapse
Now, I flashed the update but it removed my g-apps and my twrp. Is there a way that I can add those while still preserving the rom?
I will post of this issue in the official thread and see if I can get an answer there as well.
Thanks.
Zwhlol-Zniper said:
Now, I flashed the update but it removed my g-apps and my twrp. Is there a way that I can add those while still preserving the rom?
I will post of this issue in the official thread and see if I can get an answer there as well.
Thanks.
Click to expand...
Click to collapse
If u think I helped u then hit the thx button.???
tra_dax
I'm afraid I didn't get an answer from you. I asked for a link but I didn't get one. But you also suggested that I flashed the rom from or custom recovery. Correct me if there is anything wrong in the process that me and my cousin discovered. I probably forgot to mention that I had a T-800 but anyways.
From a prior, we did an ADB sideload of TWRPrecovery. It tooks my cousin a while to find the stuff, but he was able to reinstall the device drivers and sideload it into the system memory. From there, he uploaded the rom installer, which was done through aroma, at that point. Then. we installed, Gapps and customized it to include the services that I want. The rom worked perfectly.
But I messed up when I flashed the OTA through ODIN rather than through twrp. It deleted the custom recovery and a popup saying that gapps could not be located was annoyingly in the way.
So at this point. We were able to root the tablet. then flash the custom recovery. First we loaded the recovery, the actual rom. then gapps, and finally the OTA from the tablet memory. In hindsight, we decided to do this after trying to install straight gapps from the OTA and gapps kept giving an error code 70. After loading everything onto the rom, it worked.
Now I do have a question about xposed. Would I have to flash that in recovery if I wanted to take access of its features? Is there a link on how to use it? Or does that depend on xposed and how well my rom could support it?
Well I won't suggest u to flash xposed since it can give u bootloop problems and I m sure u won't wanna take a risk. But if u really want it then tell me.
And for installing the zip first u will need a deodexed rom installed on ur device
tra_dax
Yeah. I found out the hard way that my device can easily get boot looped with too many modules. I do have a back up ready and a method for wiping and resetting the device.
Zwhlol-Zniper said:
Yeah. I found out the hard way that my device can easily get boot looped with too many modules. I do have a back up ready and a method for wiping and resetting the device.
Click to expand...
Click to collapse
U will need a de-odexed ROM. If u don't get one, i'll find the way to make the firmware de-odexed. Here's the xposed apk and the zip file:
http://forum.xda-developers.com/attachment.php?attachmentid=3333763&d=1432712436
tra_dax
I'll send you a link to the code version that I used with the rom that I ask using.
Sent from my SM-N910V using Tapatalk
tra_dax said:
U will need a de-odexed ROM. If u don't get one, i'll find the way to make the firmware de-odexed. Here's the xposed apk and the zip file:
http://forum.xda-developers.com/attachment.php?attachmentid=3333763&d=1432712436
tra_dax
Click to expand...
Click to collapse
Practically every custom rom in the dev section is deodexed.
ashyx said:
Practically every custom rom in the dev section is deodexed.
Click to expand...
Click to collapse
Yeah u right. A custom too is a deodexed ROM.
tra_dax
This is @tamirda's rom. http://forum.xda-developers.com/showthread.php?t=3222264
And here is the link to the xposed framework. http://forum.xda-developers.com/showthread.php?t=3113463
Zwhlol-Zniper said:
This is @tamirda's rom. http://forum.xda-developers.com/showthread.php?t=3222264
And here is the link to the xposed framework. http://forum.xda-developers.com/showthread.php?t=3113463
Click to expand...
Click to collapse
OK, the ROM is the right one, get the v3 xposed by arter97.
tra_dax
tra_dax said:
OK, the ROM is the right one, get the v3 xposed by arter97.
tra_dax
Click to expand...
Click to collapse
V3? V75 is the latest version.
According to one user, they tried to flash the latest version's framework only to have it stuck in a boot loop. I tried a 71 exynos file because another user recommended it as the most stable framework for the poster with that issue.
Sent from my SM-N910V using Tapatalk
Zwhlol-Zniper said:
According to one user, they tried to flash the latest version's framework only to have it stuck in a boot loop. I tried a 71 exynos file because another user recommended it as the most stable framework for the poster with that issue.
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
Well then now do u think I helped u? If yes then hit the thx button. I won't force u to do that but it will help me to help more person.
tra_dax
I how do I do it in tapatalk?
Sent from my SM-N910V using Tapatalk
Zwhlol-Zniper said:
According to one user, they tried to flash the latest version's framework only to have it stuck in a boot loop. I tried a 71 exynos file because another user recommended it as the most stable framework for the poster with that issue.
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
Then they flashed the wrong one. The latest version is working just fine.
QK1 TAR File: https://www.androidfilehost.com/?fid=673791459329068925
Prior version if needed:
QJ1 TAR File: https://www.androidfilehost.com/?fid=889964283620769224
HOW TO ROOT USING MAGISK:
Flash stock with Odin. The latest build is posted above. Reboot and complete setting up the phone.
Download Magisk Zip and Magisk Manager APK (these are two different things, you need both) and place them on your phone. Download from https://magiskmanager.com/
Do the usual to enable Developer Options (tap on build number until you see it enabled) and set OEM Unlock ot on (this is a setting under developer options.) Make sure you do these steps.
Go into Download mode. Turn phone off. Hold Volume Down, Home and Power buttons. We'll do something similar in a minute.
Flash TWRP via Odin, but DO NOT REBOOT. TWRP is here, use the TAR file. https://dl.twrp.me/zerofltespr/
Manually Power phone down by holding the Power button a really long time.
Manually boot into Recovery. Hold Volume Up, Home and Power. You should now be in TWRP.
Use TWRP to flash the Magisk zip file. When you reboot, you should be rooted.
Reboot and install the Magisk APK. Allow "Unknown sources."
You can still root your phone using SuperSU, but I am not supporting that.
thank you for your link.
- have you got the latest PD2 rom file yet?
- does the TWRP work on PD2 build?
thanks again
Thank you so much for the help and the resources, i definetly would need to make nandroid backup so i won't go through that pain again lol c:
FYI, the new PD2 build is already updated...
http://samsung-updates.com/device/?id=SM-G920P
yaibakt said:
FYI, the new PD2 build is already updated...
http://samsung-updates.com/device/?id=SM-G920P
Click to expand...
Click to collapse
Thanks and I am grabbing that now, will post an Android File Host link. However, I am going to include a cautionary note until we clarify the situation with TWRP.
But I am glad that you pointed that out.
koop1955 said:
Thanks and I am grabbing that now, will post an Android File Host link. However, I am going to include a cautionary note until we clarify the situation with TWRP.
But I am glad that you pointed that out.
Click to expand...
Click to collapse
thank you for your download and upload work. it spends your time and stuffs.
also for the TWRP. I am waiting for the new TWRP version now.
cant live without being rooted nor xposed...
Amazing! If you want any help organizing or anything like that, feel free to let me know :good:
JoeFCaputo113 said:
Amazing! If you want any help organizing or anything like that, feel free to let me know :good:
Click to expand...
Click to collapse
Thanks, Joe. I think that the next step (and it won't be me!) is to do a video tutorial. A "How To Use" this stuff like Tim (QBKing) used to do.
did anyone have TWRP on the lastest PD2 yet?
im about to re-flash the rom this weekend and want to try the PD2.
if not, i guess i must stay at PB6
yaibakt said:
did anyone have TWRP on the lastest PD2 yet?
im about to re-flash the rom this weekend and want to try the PD2.
if not, i guess i must stay at PB6
Click to expand...
Click to collapse
yes,i have PD2 and TWRP 3.0.0.1.
everythings is ok.
note:dont root your phone with flashing supersu.zip (this method dont work good and have some issues)
use g920F (not g920P) cf auto root image (work great)
yaibakt said:
did anyone have TWRP on the lastest PD2 yet?
im about to re-flash the rom this weekend and want to try the PD2.
if not, i guess i must stay at PB6
Click to expand...
Click to collapse
I have twrp working on cpd2 ill see if i can find the link to the whole package
You gotta flash it via odin and it says for pb6 but during flash , it updates the firmware
Sent from my SM-G920P using Tapatalk
I didn't see this question is the pd2 link an update or a full wipe?
cyberone3 said:
I didn't see this question is the pd2 link an update or a full wipe?
Click to expand...
Click to collapse
Complete TAR file.
i confirm that the TWRP in #1 works with latest PD2.
yaibakt said:
i confirm that the TWRP in #1 works with latest PD2.
Click to expand...
Click to collapse
Thanks for this, have not gotten around to testing myself.
Could you post any feedback that you might have on PD2 itself? Worth bothering with, or just a minor security thing?
Im about to go get my new replacement S6 and have a feeling its going to be on the latest firmware so good to hear it works on Pd2. Well TWRP works on PD2what about flashing supersu 2.71 in twrp does that brick it? Or did u use cfautoroot?
Jimmy1life said:
Im about to go get my new replacement S6 and have a feeling its going to be on the latest firmware so good to hear it works on Pd2. Well TWRP works on PD2what about flashing supersu 2.71 in twrp does that brick it? Or did u use cfautoroot?
Click to expand...
Click to collapse
You'd be surprised actually, when I got my replacement, it came with the like second updat, lol
Jimmy1life said:
Im about to go get my new replacement S6 and have a feeling its going to be on the latest firmware so good to hear it works on Pd2. Well TWRP works on PD2what about flashing supersu 2.71 in twrp does that brick it? Or did u use cfautoroot?
Click to expand...
Click to collapse
Twrp and supersu 2.71 work for me.
Nothing noticeable between pd2 and pb6 actually so if you are still good on pb6, let it stay there.
BTW i get good battery life on pd2 as you can see my attached SS. Will pass 5 hrs sot easily, even more.
Sent from my SM-G920P using Tapatalk
@yaibakt, any chance you could edit your post to reduce the image size or just eliminate it, now that it has been seen?
Trying to keep the thread clean.
Thanks.
Ok, i will delete the image.
I upload directly from tapatalk app so i cant resize it.
Sent from my SM-G920P using Tapatalk