Solution for 18 mb update problem (rooted users)

Solution for 18 mb update problem (rooted users) - Micromax Canvas A1

Hey guys im Vivek and some days before I had a problem with installing 18 mb update and yes I'm a rooted user .the thing what I did to successfully install the new updates is flash android one stock recovery by flashify (app on play store)then uninstall ur root (open SuperSU settings and full unroot) and an important note that u should have ur android 5.1 update zip on ur SD card.power of ur phone go in reboot mode then install zip from SD card (install ur 5.1zip) and reboot system then download the remaining updates from settings -about phone - system update - it will work guys good luck

Related

[Q] sgy cwm flash.

i have samsung galaxy y s5360
in rom manager there is flash clockwork mod recovery when i click on a message comes unsupported device
then a dialog box comes that install manually and so on i presse yes then two version comes
clockwork2.x and
clockwork 3.x
what i do
i pls help
current rom creed 2.0.
rooted

Download CWM from http://www.mediafire.com/?wx6e0agxdsyxdlq
.Go to recovery mod,install update(cwm.zip) and finish
Press THANKS if i hellped you

but how to u get backup current rom in rom manager

i dont know how to backup with rom manager but you can make a backup after you install cwm,you have a option in menu.
Note:you need space in your sd card max 300mb - 1 gb or get error when you make backup for your rom
JuSt pReSs THANKS if i HeLLpeD yOu

[Guide] Update JB OTA in Taiwan HOX Manually

hi i have hox with cid 621
i downloaded ota in my pc and copy in root memory and change to update.zip but when i go to recovery cant update my phone...
any body help me how update offline?! im confused.. when i select update from internal storage recovery reset and... fail

Reza WM said:
hi i have hox with cid 621
i downloaded ota in my pc and copy in root memory and change to update.zip but when i go to recovery cant update my phone...
any body help me how update offline?! im confused.. when i select update from internal storage recovery reset and... fail
Click to expand...
Click to collapse
the update.zip must be in internal (sdcard) storage where you can select all mods and roms...not in root something...

Complete Guide for Rooting and Flashing Custom ROM Galaxy Y GT-5360 for beginners

Tired of searching for a complete Guide to Flash JellyBlastv3 on your GT-S5360?
Well, I have something for you::::
Read On....
Warning: The Below Steps are only for Samsung Galaxy Y, GT-S5360
Performing any of the steps shall Void the Warranty of Your Device.
I am not responsible for any damage you cause to your Device or emotional loss or anything.
You are solely responsible for you actions.
The Following procedure has been tested by me and it is working correctly.

Warnings and Important Tips:
1. The process may and will erase all your data present on the device. Better backup your contacts, Messages, Calendar entries, Notes Etc. You may use Super Backup, Go Backup or SMS Backup & Restore. There are several other apps in the Market. I would recommend to backup using multiple apps.
2. A Computer should be within reach with internet. Also have a USB Cable. Wi-Fi is recommended.
3. Make sure the system is running Stock ROM and Stock Kernel.
4. Also make sure you are running latest version of android available. On Galaxy Y, it is 2.3.6
5. If not, you can update, by going into settings>about phone>software update. Sign in with Samsung Account. 6. Before proceeding further, make sure that the phone is fully charged (Recommended 70% at least). High Chances of damage are there if the device runs out of juice during flashing.
7. Proceed with caution. Avoid confusion. Follow the steps! Never Jump to next step before completing first!
8. Within Procedures if you think the battery is not enough (>70%), you can charge it before proceeding to next procedure. The Phone can’t be charged within an ongoing procedure.
9. Enable the USB Debugging option. Go to Settings>Development>USB Debugging. Check it every time.
10. It took me considerable time to type the detailed steps to make it easy for even a beginner. Be Generous.
DO NOT FORGET TO PRESS THE THANKS BUTTON! :laugh:
I. Root
Rooting is a process by which you can get root access or administrator privileges to your Android phone and can flash tweaks, custom ROMs, custom kernels, install additional applications which requires root, use firewall etc.
Root will void your phone’s warranty but it doesn’t matter you can get it back! (Google unroot)
1. Download the the update.zip file to your SD Card (not in any folder). I have attached it with the post.
2. Switch off your phone & boot into recovery mode.
3. Press Vol Up + Power Key + Home button together at the same time to boot in recovery mode.
4. Touch screen is disabled here.
5. Use volume keys for scrolling & home button for selection.
6. Select Apply update from SD card.
7. Select update.zip (which you have downloaded).
8. When it shows Installed from SD Card complete written.
9. Select reboot system now.
10. Your phone will restart & first boot may take 5 minutes. (Mine took a few seconds!)
11. Check for an application Superuser and open it.
12. Go to Menu > Preferences > SU Binaries> Update binaries.
13. SU Binaries will update. (You need active data connection or Wi-Fi)
14. When it get updated, restart your phone.
You’re done! Your phone is now rooted.
Warning: Do not delete Superuser or you will lose your root!
II. Flash ClockWorkMod
ClockWorkMod is a Custom Recovery which lets you Flash Custom ROM, Kernels etc.
Note: This is temporary. Every time you need CWM, you have to flash it again. (For your convinience, keep it in the SD)
Instructions:
1. Enable USB Debugging by going to Menu -> Settings -> Applications -> Development - Enable USB Debugging.
2. Download the CWM Recovery.zip file and Place that file on the root directory of your SD card. (Attached)
3. Switch off your phone .Then boot into recovery mode, (hold Volume up button + Home button + Power button).
6. Select "apply update from SD card ", find the zip file you copied to your SD card earlier.
Once done, it will give you the option to reboot your phone, reboot and you're done!
You got CWM installed, you can now flash custom ROMs.
III. Backup Stock ROM
In case, if anything happens to your device while flashing Custom ROM, backup of Stock ROM serves as a contingency plan. The Backup can be used to recover damaged device via Odin. (Now don’t ask me what’s Odin)
It can also be used to return to the Original State if ever you wish to revert back.
1. Boot into CWM by Flashing CWM again.
2. Go to Backup/Restore
3. Select Backup Current ROM. It will take a while and then it’s Done! The size of the Backup File depends upon the no. of apps installed. Generally should be around 200-400 MB.
IV. Flash Custom ROM (JellyBlastv3 by Avijit Ghosh)
DOWNLOADS: http://forum.xda-developers.com/showthread.php?t=1679563
INSTALLATION GUIDE:
1. Make sure that you're on Stock kernel. Stock = Factory version.
2. Remove a2sd or data2sd and format your 2nd partition if you have it.
3. Place the above file to your SD Card (NOT IN ANY FOLDER!!!)
4. Switch off your phone.
5. Flash Clockwork mode.
6. Wipe data/factory reset.
7. Wipe cache partition.
8. Go to Advanced options and Wipe Dalvik cache.
9. Go to mounts and storage->select mount/system and mount/data.
10.Now choose: Install zip from sd card.
11. Choose JELLYBLAST V3.signed.zip and choose yes.
12. Keep your fingers crossed and pray.
It will be installed. Now reboot your phone. First boot will take time. Be patient.
V. Install OTA
Over The Air Updates are the updates that are released after the ROM to fix bugs and problems or to make minor changes.
Important: Apply the OTA Updates in serial-wise manner to avoid bricking.
1. Download OTA 1, OTA 2, OTA 3, OTA 4.1 and OTA 5 and place them in your SD Card.
2. Boot into CWM, Select “Install .zip from SD ” and select OTA 1. After Completion, Device will Reboot.
3. Repeat Similar Steps OTA 2, 3,4, and 5.
4. You are Done! Now you are Running the latest version of the Custom ROM available.
5. You can check for updates in OTA updater.
VI. Partitioning SD Card
On SGY GT-S5360, the Internal Memory is too low (190 MB). Every time you try to update the apps or try to Install new apps, you get the annoying message saying “ Internal Memory Full, delete some apps”. This is where Link2sd comes to the rescue!
There are also Similar apps available on the Market, but here we will be using Link2SD.
There are several ways to partition SD card, but here we will be using CWM.
Note: You need a rooted device, well doesn’t matter we have already rooted.
Note: This method will erase all your data on SD, so better backup it
1. Boot into CWM recovery.
2. Select Advanced options.
3. Select Partition SD Card.
4. Choose the partition size. (1024 recommended)
5. Choose the Swap size. (0 M)
6. Select “Yes”. It will take a while and then you are done! Reboot your phone.
7. Open Link2SD (or Download it from the Market). A pop-up will appear, choose ext3 (ext4 is fastest but ext3 is most compatible). Then Reboot.
8. Open Link2SD, Go to settings , then tick Auto Link.
9. Below in Auto Link settings click on all the three- Link App file, Link Dalvik Cache, Link library files.
10. Also set the Default location to external.
11. You are done. You can also link some of the existing user apps to the partition.
Now all your user applications will be linked to the SD Card, saving your precious internal memory space
Also Don’t forget to Grant Link2SD superuser permissions.
YOU ARE DONE! RESTORE YOUR BACKUP & ENJOY!!
NOW DON’T BE SELFISH! PRESS THE THANKS BUTTON!!!
The ROM has been made available by Dev Avijit Ghosh. Do not forget to thank the developer for his effort.
For Screenshots and Downloads Visit :
http://forum.xda-developers.com/showthread.php?t=1679563

U posted in the wrong section only questions go in q and a also there are many other guides for this I'll report for it to be moved
Phone Slow? go ------>HERE<------
_____________________________________
"All my life I had one dream to achieve many many goals"

Here I have attached the files for Rooting (update_root.zip) and Clockworkmod recovery. Download them from here. :good:

zaeemsheikh said:
It has been already moved.
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Smh was that addressed to me? If so would it have been crazy to assume it moved after I reported it and me and the OP weren't crazy because as u see he thanked me
Phone Slow? go ------>HERE<------
_____________________________________
"Google took 4 years to reach android 4.0.4 and apple to reach android 1.6"

You have forgotten the most important step in flashing any zip file in cwm
Go into mounts and storage and mount system and data before you choose a zip from sd card
Also the links to jb v3 have been removed due to rule brakes - I suggest you base your guide on another rom

marcussmith2626 said:
You have forgotten the most important step in flashing any zip file in cwm
Go into mounts and storage and mount system and data before you choose a zip from sd card
Also the links to jb v3 have been removed due to rule brakes - I suggest you base your guide on another rom
Click to expand...
Click to collapse
Well, I myself flashed the zip without mounting system and data. Would you please care to tell what does this mount system and data do? Anyways thanks, I will edit my post.
Also why have the links been removed?

TingTingin said:
U posted in the wrong section only questions go in q and a also there are many other guides for this I'll report for it to be moved
Phone Slow? go ------>HERE<------
_____________________________________
"All my life I had one dream to achieve many many goals" 
Click to expand...
Click to collapse
Alright.

zaeemsheikh said:
Well, I myself flashed the zip without mounting system and data. Would you please care to tell what does this mount system and data do? Anyways thanks, I will edit my post.
Also why have the links been removed?
Click to expand...
Click to collapse
Mount system allows cwm to write to the system folder of your phone
Some versions of cwm when cwm is flashed have system already mounted which is probably why you got away with it
If system is not mounted the zip will still appear to of flashed but nothing will of changed

zaeemsheikh said:
Well, I myself flashed the zip without mounting system and data. Would you please care to tell what does this mount system and data do? Anyways thanks, I will edit my post.
Also why have the links been removed?
Click to expand...
Click to collapse
the thing is in 'permanent' cwm kernels(like savie) /system won't be auto mounted therefore you'll have to mount it manually for successfull flash as cwm can't write onto an un mounted partition . The problem doesn't seem to exist with temporary cwms.

CWM Rom Manager
Hey I would just like to know! I used this then after some reading I would like to install the rom manager from Play Store. I tried it but it seems that my Galaxy Y is not supported then it asked me if I already installed one. Is it ok to also use rom manager with this method?

I already change my ROM feom stocm to cm7, then i decide to partition my memory
But sadly after i did the partition steps you provided here, i lost 2gb from my sd and i check the link2SD storage info and found 2nd partition not mount. I click cleanup 2nd partirion too but i receive error message /data/sdext2 mount not found. I tried to mount it in CWM but nothing happens, what should i do? My internal is already full now

..
:laugh:Very good post.

Is this guide tested and works?

Nice
Thanksss for sharingg
But my eset find virus in jelly blast v3 ROM
But I like this ROM battery performance is awesome...
Sent from my P2 using XDA Premium 4 mobile app

Excellent Guide
Hey,
Thank you very much for providing such a nice guide. I did it and now all I have is a new custom ROM and its supported features. Also thank you to those who make all stuffs necessary for installing new custom ROM. I am really happy to use my new custom ROM.
:good:

same question
reezer16 said:
Hey I would just like to know! I used this then after some reading I would like to install the rom manager from Play Store. I tried it but it seems that my Galaxy Y is not supported then it asked me if I already installed one. Is it ok to also use rom manager with this method?
Click to expand...
Click to collapse
:cyclops: i wanna ask the same question ..
---------- Post added at 12:24 PM ---------- Previous post was at 12:09 PM ----------
Where to download the jellyblast v3.zip
Link on the page is not working...
M a beginner
Sent from my Galaxy Nexus

Unable to update OTA update on my galaxy y..
Can anybody plz tell me from where to download the manual updates like ota 1,2,3,4,5,
Sent from my Galaxy Nexus

zaeemsheikh said:
Tired of searching for a complete Guide to Flash JellyBlastv3 on your GT-S5360?
Well, I have something for you::::
Read On....
Warning: The Below Steps are only for Samsung Galaxy Y, GT-S5360
Performing any of the steps shall Void the Warranty of Your Device.
I am not responsible for any damage you cause to your Device or emotional loss or anything.
You are solely responsible for you actions.
The Following procedure has been tested by me and it is working correctly.

Happy28288 said:
Hi,
i am new to this. Tried flashing a custom rom but after rebooting my phone, i am still running on my old rom. What should i do now?
Please help me.
:crying:
Click to expand...
Click to collapse
Somebody didn't mount system before flashing a zip in cwm did they
Failing to mount system = nothing will change

[Q] I'm confused: running 4.2.2 but want 4.4

Hi,
Early last year I rooted my Desire and installed CM10.1 VJ Jelly Bean 4.2.2 v6.3 .
Everything works fine, even A2SD.
Now Android 4.4.2 KOT49H / CyanogenMod 11.0 for HTC Desire (GSM) is out and I want to try this.
I've already downloaded the zip-files from the post.
I'm confused because I can't get my 'mind set' what to do next?: (and can't find the right post on the forum)
Is this the correct way?
- copy the 3 downloaded files to SD
- start phone with down volume + power
- go to recovery
- install zip from SD
- choose cm-11-20140317.....
- reboot.....
Do I have to clean the SD or not.....
Please advice.

- Copy rom and gapps to sd card
- Boot into recovery
- Full wipe (not including the sdcard)
- Flash rom
- Boot the phone up normally
- Activate a2sd (instructions are in the OP of the rom)
- Reboot back into recovery
- Flash gapps
- Reboot
- Profit
Also make sure you meet the following requirements:
- Using a newer recovery such as 4EXT or TWRP
- You have an ext partition on your sdcard (you probably already have this since you are using a2sd on 4.2.2)

Might be a bit late but just in case...
If you want to keep apps between rom flashes, your very first step should be to back them up with something like titanium backup. Also backup your contacts to Google account etc. Because these all get wiped...
Also, before you full wipe, it's good practice to make a nandroid backup just in case:
- for whatever reason new rom doesn't flash and doesn't boot
- you don't like the new rom
That way you always have a safe point point to restore to
Unless you know exactly what you're doing, making a nandroid backup before you flash anything is just good habit

Chromium said:
- Copy rom and gapps to sd card
- Boot into recovery
- Full wipe (not including the sdcard)
- Flash rom
- Boot the phone up normally
- Activate a2sd (instructions are in the OP of the rom)
- Reboot back into recovery
- Flash gapps
- Reboot
- Profit
Also make sure you meet the following requirements:
- Using a newer recovery such as 4EXT or TWRP
- You have an ext partition on your sdcard (you probably already have this since you are using a2sd on 4.2.2)
Click to expand...
Click to collapse
Thanks, it works. It came back to live and will now install:
- Slim Gapps package for KitKANG v0.7 and v0.8
Thanks!!
mmmm
a2sd install:
su [enter]
Permission denied.....
Whats next? I Guess I start over and FIRST start a2sd....and then Gapps.......

haiko228 said:
mmmm
a2sd install:
su [enter]
Permission denied.....
Whats next? I Guess I start over and FIRST start a2sd....and then Gapps.......
Click to expand...
Click to collapse
When you entered "su" did you get a screen that came up asking if you want to grant terminal emulator root access?

eddiehk6 said:
Might be a bit late but just in case...
If you want to keep apps between rom flashes, your very first step should be to back them up with something like titanium backup. Also backup your contacts to Google account etc. Because these all get wiped...
Also, before you full wipe, it's good practice to make a nandroid backup just in case:
- for whatever reason new rom doesn't flash and doesn't boot
- you don't like the new rom
That way you always have a safe point point to restore to
Unless you know exactly what you're doing, making a nandroid backup before you flash anything is just good habit
Click to expand...
Click to collapse
Chromium said:
When you entered "su" did you get a screen that came up asking if you want to grant terminal emulator root access?
Click to expand...
Click to collapse
I did it the wrong way.
Installed the ROM again, then did a2sd and after that I did Gapps.
And it works GREAT! Now I'm setting up my apps etc. And the good news is: internal memory 44 MB used and 110 MB free. So a2sd works fine till now!!
Even google maps navigation works, didn't work that well with cyanogen 10.1 android 4.2.2.
Thanks guys for your help!!

[Backups] [Radios] [SS/DS] Backups of stock firmware and Radios for CWM Recovery

In this backups integrated root and recovery (SuperSU 1.93 and swipe CWM 6.0.4.7 from CM11)
There no any user data (your will be deleted) – after boot appears setup wizard. Internal storage keeps untouched.
ROM's can be installed on Single / Dual versions in any combinations.
Requirements
– unlocked bootloader
– installed CWM recovery (or persistent CWM for custom ROM's, flash from TWRP)
Important information about internal storage
4.1.2 keep files in /data/media
4.2.2 / 4.3 keep files in /data/media/0
So to have access to them move files in correspondent folder using root-filemanager.
Important information about baseband
– Every stock firmware works only with own radio version
– Basebands compatible with both versions of Xperia M: C1904/C1905 and C2004/C2005
– CyanogenMod 11 / 12 / 13 requires radio from 4.3 (new). Read more
– Older versions and non-updated custom roms based on it requires radio from 4.1.2 Single
Without appropriate radio will be no mobile network, GPS and may appears lags.
Radio normally flashed with ftf-file via flashtool or via OTA-update.
I invented to try flash radio dump via recovery as this implemented here
Thanks for testing and info @FindYanot and @PecanCM – it's worked.
So now you can easily switch between any stock firmwares without PC: just restore backup and radio.
Less brick risks as when flashing by other ways.
And no wiping internal storage like while flashing FTF.
All archives was tested before uploading and added recovery information.
So if you get error while extracting files – redownload archive. Problem on your side.
If you extracting archive on phone use ZArchiver (RootExplorer gives error).
If you got error "Can't mount /data!", then select mounts and storage > format /data and /data/media (/sdcard)
Warning, this will wipe internal storage.
---------------------------------------------------------------------
How-to
In short words: extract needed backup on sdcard, restore it without any wipes, flash appropriate radio.
1. Download needed backup
2. Extract from archive folder clockworkmod on external sdcard with replacing any files. There must be free at least 1 Gb
3. Download and copy on sdcard ZIP with appropriate radio version
4. Power off phone
5. Power on phone and when LED will be purple press once "Volume +" button
6. Create backup of current ROM by selecting backup and restore > backup to /storage/sdcard1. On sdcard must be free at least 1.5 Gb
7. Select backup and restore > restore from /storage/sdcard1
8. Select item with stock backup (stock_*) and confirm by selecting Yes
9. If ask Continue anyways? select Yes
10. After end of restore select Go Back > install zip > choose zip from /storage/sdcard1
11. Find ZIP with radio and confirm flashing by selecting Yes
12. After end of flashing Go Back > reboot system now
13. On question answer No
14. After a couple minutes of loading you have clean stock firmware with root and recovery
---------------------------------------------------------------------
Radios to flash via recovery
– 4.1.2 Single (15.1.C.2.8, 21 Mb)
– 4.3 Single (15.4.A.0.23, 21 Mb)
– 4.3 Single (15.4.A.1.9, 21 Mb)
– 4.2.2 Dual (15.2.A.2.5, 17 Mb)
– 4.3 Dual (15.5.A.0.18, 17 Mb)
– 4.3 Dual (15.5.A.1.5, 17 Mb)
Clean backup of stock with root and CWM
– 4.1.2 Single (15.1.C.2.8, RU, 500 Mb)
– 4.3 Single (15.4.A.0.23, SG, 607 Mb)
– 4.3 Single (15.4.A.1.9, PT, 676 Mb)
– 4.2.2 Dual (15.2.A.2.5, ASIA, 588 Mb)
– 4.3 Dual (15.5.A.0.18, BR, 589 Mb)
– 4.3 Dual (15.5.A.1.5, BR, 702 Mb)

Bonoboo said:
In this backups integrated root and recovery (SuperSU 1.93 and touch CWM 6.0.4.7 from CM11)
There no any user data – after boot appears setup ......
Click to expand...
Click to collapse
Thanks man . Very helpful :good:, . Appreciated.

dual 4.2.2 wont extract

8hodgsonkh said:
dual 4.2.2 wont extract
Click to expand...
Click to collapse
Downloaded and tested: all ok.
Just redownload again.
P. S. All archives include addition recovery information to minimize this situations.

Bonoboo said:
Downloaded and tested: all ok.
Just redownload again.
P. S. All archives include addition recovery information to minimize this situations.
Click to expand...
Click to collapse
Thanks bro, its okay i just flashed a ftf, all ok

Thank you so much for your CWM back up
My device had gotten into quite a mess and your backup was a real life saver. Thank you very much.

problem
In my xperia m I had cm11 fxp314 build, after updating to fxp317 and flashing your file the Sim/network is not getting detected.

pokerttfu said:
In my xperia m I had cm11 fxp314 build, after updating to fxp317 and flashing your file the Sim/network is not getting detected.
Click to expand...
Click to collapse
Me too, dude. After few times try flashing FXP317 from FXP316 (4.1.2) baseband, network is not getting detected, but then finally solved. Read this Here
Sent from my C1905 using XDA Premium 4 mobile app

pokerttfu said:
In my xperia m I had cm11 fxp314 build, after updating to fxp317 and flashing your file the Sim/network is not getting detected.
Click to expand...
Click to collapse
saigetshu said:
Me too, dude
Click to expand...
Click to collapse
Sorry, guys.
This happen not to all and I don't know why.
UPD: here correct tutorial

Bonoboo said:
Sorry, guys.
This happen not to all and I don't know why.
Click to expand...
Click to collapse
Okay, I know it. I have a try for many times but a sim getting not detected, but after all I found how to solved that
Sent from my C1905 using XDA Premium 4 mobile app

My device is M Dual c2005 with android 4.3 stock rom. I want to flash CM11 on my device, can i just flash 4.3 Single (21mb) Radios or i should flash the complete single 4.3 rom (about 750mb) ? can someone please tell me the steps?

bugggmenot said:
Can i just flash 4.3 Single (21mb) Radios or i should flash the complete single 4.3 rom (about 750mb) ?
Click to expand...
Click to collapse
First try with dedicated radio ZIP.
If it not helps then use flashtool.
After selecting ftf-file there untick all except radio.

Thanks Bono for the files,
One question:
It doesnt matter using same radio despite C1904/1905 or C2004/2005 model differences? They work on different HSDPA frequencies, thats why I'm asking.
Salute

DanDare_77 said:
It doesnt matter using same radio despite C1904/1905 or C2004/2005 model differences? They work on different HSDPA frequencies, thats why I'm asking.
Click to expand...
Click to collapse
99% must be ok.
Because people flashed FTF-file (there radio too) for C1904 on C1905 and have network.

I restore your bacup of 4.2.2 on my c1904 but when I reboot or power on my device it not rebooting or turning on instead.of it red.light is blinking but when I connect it to charger then it works normally...

ankit jaggi said:
red.light is blinking but when I connect it to charger then it works normally...
Click to expand...
Click to collapse
4.2.2 ? From Dual?
Anyway don't think that something can be related to backup.
Silly question, but does your battery charged?

Bonoboo said:
4.2.2 ? From Dual?
Anyway don't think that something can be related to backup.
Silly question, but does your battery charged?
Click to expand...
Click to collapse
yes it is charged

ankit jaggi said:
yes it is charged
Click to expand...
Click to collapse
I restored same 4.2.2 Dual backup on C1905 and had no problems.
Don't know whats wrong on your side.

Hii .. iam on Cm 11 beta 5.. flashed it directly from 4.1 using 4.3 baseband (radio) and its working fine but I was not being able to use GL2Sd or any other app to run high end games and Swapping memory is also not working... so want to flash 4.3 , as i heard that it supports GL2Sd, and as this Backup comes with full root and cwm I WANT IT.. but how to flash it? should i need to flash .IMG file in fastboot mode as I did while flashing CM?? ...
Bonoboo said:
4.1.2 keep files in /data/media
4.2.2 / 4.3 keep files in /data/media/0
So to have access to them move files in correspondent fb]2.[/b] Extract from archive folder clockworkmod on external sdcard with replacing any files. There must be free at least 1 Gb
3. Download and copy on sdcard ZIP with appropriate radio version
4. Power off phone
5. Power on phone and when LED will be purple press once "Volume +" button
6. Create backup of current ROM by selecting backup and restore > backup to /storage/sdcard1. On sdcard must be free at least 1.5 Gb
7. Select backup and restore > restore from /storage/sdcard1
8. Select item with stock backup (stock_*) and confirm by selecting Yes
9. After end of restore select Go Back > install zip > choose zip from /storage/sdcard1
10. Find ZIP with radio and confirm flashing by selecting Yes
11. After end of flashing Go Back > reboot system now
12. On question answer No
13. After a couple minutes of loading you have clean stock firmware with root and recovery
Click to expand...
Click to collapse
In step 1,2 you said to move downloaded file to another location... cant I keep it in my External memory??
In 6,7 you said to backup and restore my current ROM (which is CM 11 with me) and then flash the 4.3 file.. why do i need to backup my CM11 nad restore it again and then flash 4.3??
CANT I JUST DOWNLOAD THE 4.3 TO MY EXTERNAL SD AND CLEAN partition cache, cache and restore factory settings and FLASH 4.3 via CWM? Do I NEED A PC? plz guys help with this one as You guys always did in Rooting,bootloader unlocking and CM as this is my first attempt and also hepling me MEMORY SWAP( although it didnt work) ... if memory swap would have orked then i would have not needed to flash 4.3 as iam loving CM

syedafzal.shah said:
In step 1,2 you said to move downloaded file to another location... cant I keep it in my External memory??
Click to expand...
Click to collapse
You downloaded archive.
Folder with files from there must be extracted on microSD.
syedafzal.shah said:
In 6,7 you said to backup and restore my current ROM (which is CM 11 with me)
why do i need to backup my CM11 nad restore it again and then flash 4.3??
Click to expand...
Click to collapse
6. This optional to easy revert. You can skip this.
7. This restores not your backup, this restores (or flashing in your words) needed stock ROM that you downloaded.
syedafzal.shah said:
CANT I JUST DOWNLOAD THE 4.3 TO MY EXTERNAL SD AND CLEAN partition cache, cache and restore factory settings and FLASH 4.3 via CWM?
Click to expand...
Click to collapse
This is not flashable ZIP, this is preinstalled backup.
Just follow instruction and you get 4.3
syedafzal.shah said:
Do I NEED A PC?
Click to expand...
Click to collapse
No.

Develop Bugs

welcome