[Solved] OTA update fails - One (M8) Q&A, Help & Troubleshooting

Hi all,
I bought a 2nd hand HTC One m8, and today I tried to install the OTA fix for stagefright, and after my phone rebooted I was faced with the following error message (see attached photo): "Package expects build fingerprint of htc/telus_wwe/htc_m8:5.0.1/LRX22C/463267.2:user/release-keys or htc/telus_wwe/htc_m8:5.0.1/LRX22C/463267.3:user/release-keys; this device has htc/h3g_uk/htc_m8:5.0.2/LRX22G/509530.6:user/release-keys.".
After searching around, I found out that this is likely the result of rooting and modifying the system or flashing a custom recovery. So I booted into HBOOT and was greeted with (see 2nd photo):
Code:
*** Software status: Modified ***
*** RELOCKED ***
M8_UL PVT SHIP S-ON
Which seems to indicate that the device has indeed been tampered with.
I've searched around to try to figure out how I can restore my device to 100% stock firmware, but they all seem to require unlocking the bootloader and rooting the device. Do I have a simpler option? I tried saving the OTA zip file and extracting recovery.img from the firmware.zip file, but when I try to flash it via "fastboot flash recovery", I get:
Code:
target reported max download size of 1826414592 bytes
sending 'recovery' (13218 KB)...
OKAY [ 1.451s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.923s
It seems strange that the stock recovery image fails the signature verification?
I'd really appreciate any advice on how to resolve this situation - and preferably an option which doesn't require wiping my entire phone, since it takes me hours to set everything back up again...
If you've managed to read this far, I am grateful I never intended to mess around with the phone in the first place, I guess that's what I get for buying second hand....
PS. The phone is from Telus

Your 1st pic show that you have a wrong recovery image installed. You have a Telus device but the recovery is H3G meant for UK device
You can't fastboot flash a recovery when the bootloader is locked or relocked. You need an unlocked bootloader for that.
If you don't want to re-unlock the bootloader, you can use the firmware.zip that you extracted from OTA to install recovery.
1. Rename the firmware.zip to 0P6BIMG.zip
2. Put the 0P6BIMG.zip on your microSD (I believe you have one)
3. Boot to bootloader/hboot - it will ask you to update, volume up to accept
4. let it do its stuff
5. once finish it ask to reboot, then reboot
6. remove the file from microSD
7. do the OTA again
The OTA will success if your current ROM is pure non-rooted stock ROM. If it is rooted OTA will fail too

Thank you so much, I followed your instructions and it worked perfectly - you just saved me a really big headache

Related

[Q] Problem with upgrade to JB 4.2 (Cyanogen 10.1)

Hi guys,
i never posted but i use this forum as my main reference when comes to roms, flashing etc.
So i will use this post also to say a big THANKS
Here is the problem:
i was trying to upgrade my Cyanogen from the 10 to the v 10.1 (JB 4.2.x) but the classic way flash boot.img and then the rom didn't worked; i get everytime a error getprop("ro.bootloader") == ............... when i try to write the rom, i think that is a problem of the bootloader version (0.95).
Then i tried to flash the version 1.39 with the CID VODAP102 but also here i get this error:
Code:
< waiting for device >
sending 'zip' (12876 KB)... OKAY [ 1.578s]
writing 'zip'... INFOadopting the signature contained in this image...
FAILED (remote: 99 unknown fail)
finished. total time: 2.197s
U:\Users\Exico\Desktop\Nuova cartella\Fastboot\Fastboot>fastboot flash zip firmware.zip
sending 'zip' (12876 KB)... FAILED (remote: (00030003))
finished. total time: 0.001s
Then if i try again it remain blocked in " sending 'zip' (12876 KB)... "
I tried with locked and unlocked but same issue.
I saw somewhere that i cannot go directly from my version that i stoo old to this one so i was looking for a older version but unfortunately htcruu closed and im stucked.
Now Im running my nandroid backup so i can use the phone but i can try everything.
I think that the crucial point is to update the bootloader to version 1.3x, then the rom flashing will be easy.
Thanks in advance!
What's your version main number ?
Fastboot getvar version-main
Mr Hofs said:
What's your version main number ?
Fastboot getvar version-main
Click to expand...
Click to collapse
Result:
Code:
version-main: 1.29.161.13
finished. total time: 0.006s
Here you go
http://androidfiles.org/ruu/securek...Radio_1.1204.105.14_release_264070_signed.exe
So i have to:
1. Flash this rom;
2. Lock the phone
3. Flash the new bootloader
4. Unlock the phone
5. Flash the new cyanogen
Right?
I will try tomorrow, for now thanks
Ill let you know if everything goes well
1: charge the battery full
2: lock the bootloader
3: run the ruu with admin right (right click the ruu)
4: update the phone all the way (manual check)
5: unlock the bootloader
6: flash the custom recovery
7: MAKE A NANDROID BACKUP !
8: install a new rom
Mr Hofs said:
1: charge the battery full
2: lock the bootloader
3: run the ruu with admin right (right click the ruu)
4: update the phone all the way (manual check)
5: unlock the bootloader
6: flash the custom recovery
7: MAKE A NANDROID BACKUP !
8: install a new rom
Click to expand...
Click to collapse
1: charge the battery full - DONE
2: lock the bootloader - DONE
3: run the ruu with admin right (right click the ruu) - Here fails
4: update the phone all the way (manual check)
5: unlock the bootloader
6: flash the custom recovery
7: MAKE A NANDROID BACKUP !
8: install a new rom
I get the error 155: (i translate from italian)
Error[155]: Error updating image
The romm utility cannot update Android
Get the right ROM utility and retry
-------------
I tried to lock/unlock the bootloader, flash manually boot and recovery and use a stock rom nandroid backup but still nothing
Well it should, it matches 100%. What is the outcome of
Fastboot oem readcid
And what firmware did you download ?
Mr Hofs said:
Well it should, it matches 100%. What is the outcome of
Fastboot oem readcid
And what firmware did you download ?
Click to expand...
Click to collapse
Im done somewhat.
Thats what i did so far:
1. Flashed the old backup and updated it, hboot still the same
2. Flashed the RUU, hboot still the same
3. Tried to flash again and again the new hboot 1.39 that i found in a list thread in the rom section, success
4. Tried to flash back my Cyanogen 10 backup, done but does not boot
5. Wiping the phone with CWM but this time it wiped also my "sdcard" and i was with low battery and no rom
6. Found a trick to how charge the phone and then i flashed TWRP to gain access to the usb mount and i loaded Cyanogen 10.1 + gapps
7. Flashed with TWRP the rom and gapps and then flashed back CWM
A bit long but i did it! : P now that i have the newer boot loader i cannot use anymore the cyanogen 10, it remain blocked in the cyanogen logo.
Thanks for the support!
How to I update my hboot from 0.94 to 1.36?
I've tried but it wont update - my CID is HTC_44 (or 044) - i've checked and it has OTA update but I'm not sure how to do all the hboot updating thing.
Mikeshashimi said:
How to I update my hboot from 0.94 to 1.36?
I've tried but it wont update - my CID is HTC_44 (or 044) - i've checked and it has OTA update but I'm not sure how to do all the hboot updating thing.
Click to expand...
Click to collapse
You can try a RUU, you have a unbranded handset so my guess your ruu is out there....
Fastboot getvar version-main

[Q] HBoot Relocked, S-ON, Root, trying to upload stock ROM

Hello,
Im having reallly big problem with my Desire HD device and unfortunately,I realize this is only my fault and inadvertence. Im hoping that someone will help me with my problem...
First of all, I've had stock 2.3.5 on my device and every possible blockade. I've used Downgrade_v2 files (with adb and Gingerbreak and 1.32 stock android) but it wasn't working as it supossed to do. I've found nice tool to unblock DHD, called EasyAceRootTool. Everything went OK, new H-Boot was uploaded, unblock process went smoothly, Revovery Touch was uploaded to DHD as well, Superuser was installed too.
And at this level I've hurried too much, because I've installed by recovery new rom on Android 4.0.4 , this one : http://forum.xda-developers.com/showthread.php?t=1839004
And of course... I know now iVe forgot to make S-OFF, android doesn't start, nothing happens at all....
My Hboot now says :
Hboot :
***Relocked***
ACE PVT SHIP S-ON RL
HBOOT-2.0020029
RADIO -26.14.04.28_M
Ive tried a lot of soutions
1)Install PD98IMG.zip on sdcard (2 different stock roms) but when Bootlader is checking image, it says, that newer android is already on device
2)Install RUU, It says that there is a problem with Hboot and i need to wait for upgrade
3)Install PD98IMG.zip (pulled out from stock RUU) by recovery, it says that this image is "bad"
4)Restore backed up adnroid from this thread http://forum.xda-developers.com/showthread.php?t=920876&highlight=hboot, from section "Install stock Vodafone ROM", but it didn't helped as well, it says MD5 checksum failed...
5) When im trying to unlock Hboot in EasyAceRootTool, it communicating with device, but then it says : "Your device is not recognized"
Please guys... what else should I do ??
ps. I know there's a lot of grammatic mistakes, sorry for that. I was trying to check what I was writing
You've relocked your bootloader. You need to re-unlock it. Also, each time after you flash a ROM, you need to extract the boot.img from the ROM zip and
Code:
fastboot flash boot boot.img
bananagranola said:
You've relocked your bootloader. You need to re-unlock it. Also, each time after you flash a ROM, you need to extract the boot.img from the ROM zip and
Code:
fastboot flash boot boot.img
Click to expand...
Click to collapse
tried to do that in bootloader is fastboot mode, and it says :
C:\win>fastboot flash boot boot.img
sending 'boot' (2932 KB)... OKAY [ 0.496s]
writing 'boot'... INFOsignature checking..
FAILED (remote: signature verify fail)
finished. total time: 0.973s
peanek said:
tried to do that in bootloader is fastboot mode, and it says :
C:\win>fastboot flash boot boot.img
sending 'boot' (2932 KB)... OKAY [ 0.496s]
writing 'boot'... INFOsignature checking..
FAILED (remote: signature verify fail)
finished. total time: 0.973s
Click to expand...
Click to collapse
Like I said, you relocked your bootloader. First you need to re-unlock your bootloader.
bananagranola said:
Like I said, you relocked your bootloader. First you need to re-unlock your bootloader.
Click to expand...
Click to collapse
Sorry, I haven't read properly
C:\win>fastboot flash unlocktocken Unlock_code.bin
sending 'unlocktocken' (0 KB)... OKAY [ 0.014s]
writing 'unlocktocken'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.019s
It's an unlock coode made in HTCDev.com, with a signature of my handset...
Is your phone in fastboot mode?
bananagranola said:
Is your phone in fastboot mode?
Click to expand...
Click to collapse
OK, there was a trivial bug, I've wrote unlocktocken instead of unlocktoken it is working now !!
Thanks man, I was fighting with this device for more than whole week, thanks for your help
peanek said:
OK, there was a trivial bug, I've wrote unlocktocken instead of unlocktoken it is working now !!
Thanks man, I was fighting with this device for more than whole week, thanks for your help
Click to expand...
Click to collapse
Ok, Im having other problem, tried to use fastboot flash boot boot.img, everything went OK, file was sended, but nothing happens, Hboot is still 2.00.0029, tried to use RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed, but after reboot, when i see HTC on black screen, when RUU should send new update, error is occured.
PD98IMG.zip on sdcard can't install too.
peanek said:
Ok, Im having other problem, tried to use fastboot flash boot boot.img, everything went OK, file was sended, but nothing happens, Hboot is still 2.00.0029, tried to use RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed, but after reboot, when i see HTC on black screen, when RUU should send new update, error is occured.
PD98IMG.zip on sdcard can't install too.
Click to expand...
Click to collapse
The boot.img isn't the bootloader. You need to flash the ROM (not RUU), then fastboot flash the boot.img.
bananagranola said:
The boot.img isn't the bootloader. You need to flash the ROM (not RUU), then fastboot flash the boot.img.
Click to expand...
Click to collapse
C:\win>fastboot flash zip UPDATE.zip
sending 'zip' (336097 KB)... OKAY [ 57.277s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOzip header checking...
INFOzip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 62.750s
or 2 others zip with ROM I've downloaded. Hboot is unblocked for 100%
Wait, no. Flash the ROM from recovery. You can't flash zips like that in fastboot. You can flash ROM images, but it makes more sense for you to get a recovery and flash zips instead.
If you don't have a recovery, first you need to install one. If you have a rooted ROM, you can install a recovery from apps: ROM Manager for ClockworkMod, 4ext Updater apk (from 4ext's website) for 4ext, and GooManager for TWRP. If you don't, download a recovery.img and flash it from fastboot:
Code:
fastboot flash recovery recovery.img
.
If you do, just go straight to flashing the zip from recovery. Then,
Code:
fastboot flash boot boot.img
.
bananagranola said:
Wait, no. Flash the ROM from recovery. You can't flash zips like that in fastboot. You can flash ROM images, but it makes more sense for you to get a recovery and flash zips instead.
If you don't have a recovery, first you need to install one. If you have a rooted ROM, you can install a recovery from apps: ROM Manager for ClockworkMod, 4ext Updater apk (from 4ext's website) for 4ext, and GooManager for TWRP. If you don't, download a recovery.img and flash it from fastboot:
Code:
fastboot flash recovery recovery.img
.
If you do, just go straight to flashing the zip from recovery. Then,
Code:
fastboot flash boot boot.img
.
Click to expand...
Click to collapse
OK, first of all, I'm having recovery, 5.8.7.2 Touch version that was installed with EasyAceRootTool.
I can't install any .apk, because I have now installed 4.0.4 rom, and because of S-ON, it will not start. I was trying to install few roms from recovery of course (Stock versions downloaded from xda, 1.32 versions and 2.3.5.), but every time I am doing this, revovery give me a error "installation aborted (bad)" it's from a PD98IMG zip downloaded from xda and rom.zip pulled out from "RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed"
When I am trying to do in fastboot mode :
Code:
fastboot flash system system.img
(system.img from stock roms, they are uploading, says OK for writing, but when I reboot phone, I see green HTC on white screen, then black screen, and then everytime phone reboots in recovery.
Few minutes a go i tried :
Code:
fastboot eease cache
fastboot oem rebootRUU
fastboot flash zip PD98IMG.zip
but every time it says :
Code:
C:\win>fastboot flash zip UPDATE.zip
sending 'zip' (336097 KB)... OKAY [ 57.215s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOzip header checking...
INFOzip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 62.713s
peanek said:
OK, first of all, I'm having recovery, 5.8.7.2 Touch version that was installed with EasyAceRootTool.
I can't install any .apk, because I have now installed 4.0.4 rom, and because of S-ON, it will not start. I was trying to install few roms from recovery of course (Stock versions downloaded from xda, 1.32 versions and 2.3.5.), but every time I am doing this, revovery give me a error "installation aborted (bad)" it's from a PD98IMG zip downloaded from xda and rom.zip pulled out from "RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed"
When I am trying to do in fastboot mode :
Code:
fastboot flash system system.img
(system.img from stock roms, they are uploading, says OK for writing, but when I reboot phone, I see green HTC on white screen, then black screen, and then everytime phone reboots in recovery.
Few minutes a go i tried :
Code:
fastboot eease cache
fastboot oem rebootRUU
fastboot flash zip PD98IMG.zip
but every time it says :
Code:
C:\win>fastboot flash zip UPDATE.zip
sending 'zip' (336097 KB)... OKAY [ 57.215s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOzip header checking...
INFOzip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 62.713s
Click to expand...
Click to collapse
What are you trying to do?? If you have an unlocked bootloader a RUU will never flash. Besides, being S-ON requires the specific RUU for your device.
If you have CWM and an unlocked bootloader, you can flash any custom rom in recovery but need to flash boot.img after flashing the rom.
You can't flash apks in recovery, only zips. Then fastboot flash the boot.img.
bananagranola said:
You can't flash apks in recovery, only zips. Then fastboot flash the boot.img.
Click to expand...
Click to collapse
glevitan said:
What are you trying to do?? If you have an unlocked bootloader a RUU will never flash. Besides, being S-ON requires the specific RUU for your device.
If you have CWM and an unlocked bootloader, you can flash any custom rom in recovery but need to flash boot.img after flashing the rom.
Click to expand...
Click to collapse
Ok, I was trying to put this device on feet, because it wasn't load any ROM I was flashing. There's a lot of tools and tutorials that I was reading before flashing DHD on xda and other forums. I was convinced, that I need S-OFF to use custom ROM. Few minutes a go I flashed Sabsa-Prime ROM by Recovery, then i searched for boot.img in Sabsa_Prime_v16.0_By_AlirezaB.zip, flashed it in fastboot, anddddd tadaaam...Everythings working perfectly
Thank You gyus, I really appreciate your help !! I was really stuck on this device...
Best Regards !
I need help...NOOB!!!
Hi there i need help.. my phone is stuck on a relocked screen and i cant get it tp power up... i will post a pic so maybe someone can help me out asap...
good
hiii please help mee!!
peanek said:
Hello,
Im having reallly big problem with my Desire HD device and unfortunately,I realize this is only my fault and inadvertence. Im hoping that someone will help me with my problem...
First of all, I've had stock 2.3.5 on my device and every possible blockade. I've used Downgrade_v2 files (with adb and Gingerbreak and 1.32 stock android) but it wasn't working as it supossed to do. I've found nice tool to unblock DHD, called EasyAceRootTool. Everything went OK, new H-Boot was uploaded, unblock process went smoothly, Revovery Touch was uploaded to DHD as well, Superuser was installed too.
And at this level I've hurried too much, because I've installed by recovery new rom on Android 4.0.4 , this one : http://forum.xda-developers.com/showthread.php?t=1839004
And of course... I know now iVe forgot to make S-OFF, android doesn't start, nothing happens at all....
My Hboot now says :
Hboot :
***Relocked***
ACE PVT SHIP S-ON RL
HBOOT-2.0020029
RADIO -26.14.04.28_M
Ive tried a lot of soutions
1)Install PD98IMG.zip on sdcard (2 different stock roms) but when Bootlader is checking image, it says, that newer android is already on device
2)Install RUU, It says that there is a problem with Hboot and i need to wait for upgrade
3)Install PD98IMG.zip (pulled out from stock RUU) by recovery, it says that this image is "bad"
4)Restore backed up adnroid from this thread http://forum.xda-developers.com/showthread.php?t=920876&highlight=hboot, from section "Install stock Vodafone ROM", but it didn't helped as well, it says MD5 checksum failed...
5) When im trying to unlock Hboot in EasyAceRootTool, it communicating with device, but then it says : "Your device is not recognized"
Please guys... what else should I do ??
ps. I know there's a lot of grammatic mistakes, sorry for that. I was trying to check what I was writing
Click to expand...
Click to collapse

Soft Bricked HTC One M9! Please help!

Dear all,
I recently unlocked bootloader, rooted and flashed CandySix ROM on my M9. Everything was fine until I stupidily relock the bootloader (using fastboot oem lock). Then the phone can not boot into system and recovery also.
I tried to re-unlock again using the same method (Unlock_code.bin) from HTCdev. The cmd said success, i press Yes on the phone, however after reboot the status stayed the same "Relock". I did like 20 times but it was the same.
I also tried to flash many RUUs that i found but no hopes (maybe i didnt find the right one).
Now the phone stuck at download mode and bootloader mode, can't do anthing else.
Can anyone helps me how to fix this or to find the right RUU for my phone please? Many thanks.
Current status: Modified
***RELOCK***
htc_himauhl PVT S-ON
LK-1.0.0.0000
RADIO-01.04_U11440601_71.02.50709G_F
OpenDSP-v29.2.6-00492-M8994_0702
OS-2.9.710.5
mid is 0PJA10000
cid is VODAP021
I think you need a new unlock token as when you relocked your bootloader it will need to generate a new one. Follow the unlock bootloader process from the beginning to see if you can unlock it again and go from there. Good luck.
Sent from my HTC 10 using XDA Labs
squ89r97 said:
I think you need a new unlock token as when you relocked your bootloader it will need to generate a new one. Follow the unlock bootloader process from the beginning to see if you can unlock it again and go from there. Good luck.
Sent from my HTC 10 using XDA Labs
Click to expand...
Click to collapse
Thank you for your help. I tried that but no luck. Keep saying "Relocked". I really dont understand why????
1. unlock Bootloader
2. flash custom recovery
3. flash custom rom
babypopku said:
Dear all,
I recently unlocked bootloader, rooted and flashed CandySix ROM on my M9. Everything was fine until I stupidily relock the bootloader (using fastboot oem lock). Then the phone can not boot into system and recovery also.
I tried to re-unlock again using the same method (Unlock_code.bin) from HTCdev. The cmd said success, i press Yes on the phone, however after reboot the status stayed the same "Relock". I did like 20 times but it was the same.
I also tried to flash many RUUs that i found but no hopes (maybe i didnt find the right one).
Now the phone stuck at download mode and bootloader mode, can't do anthing else.
Can anyone helps me how to fix this or to find the right RUU for my phone please? Many thanks.
Current status: Modified
***RELOCK***
htc_himauhl PVT S-ON
LK-1.0.0.0000
RADIO-01.04_U11440601_71.02.50709G_F
OpenDSP-v29.2.6-00492-M8994_0702
OS-2.9.710.5
mid is 0PJA10000
cid is VODAP021
Click to expand...
Click to collapse
U need a RUU with OS 2.9.710.5 or higher that hopefully contains your cid and mid.
By running it u will lose al your data.
@Flippy498 has one and needed instructions in his spreadsheet.
https://docs.google.com/spreadsheets/d/15K6xhb6wtosp9j8yu4xHBZ6n9v5OaFSW6ZVWxC4u_qc/pubhtml#
side_flip15 said:
1. unlock Bootloader
2. flash custom recovery
3. flash custom rom
Click to expand...
Click to collapse
The thing is I can not unlock bootloader at the moment. I dont know why. I tried the HTCdev process, everything runs smoothly but after reboot the phone still "RELOCKED". I've done many times and still the same. Help me pls
Fain11 said:
U need a RUU with OS 2.9.710.5 or higher that hopefully contains your cid and mid.
By running it u will lose al your data.
@Flippy498 has one and needed instructions in his spreadsheet.
https://docs.google.com/spreadsheets/d/15K6xhb6wtosp9j8yu4xHBZ6n9v5OaFSW6ZVWxC4u_qc/pubhtml#
Click to expand...
Click to collapse
Thank you. I tried that link. However, after download the RUU zip file, I cant flash it.
The error was
C:\Users\Man Phan\Desktop\platform-tools>fastboot flash zip 0PJAIMG.zip
load_file: could not allocate -1977527069 bytes
error: cannot load '0PJAIMG.zip'
I tried to use another adb, fastboot package and it said
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash zip 0PJAIMG.zip
target reported max download size of 800000000 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 2317440227 is not a multiple of the block size 4096
sending sparse 'zip' 1/1 (0 KB)...
error: write_sparse_skip_chunk: don't care size 2317440227 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 2317440227 is not a multiple of the block size 4096
OKAY [ 1.031s]
writing 'zip' 1/1...
(bootloader) HOSD CL#573756
FAILED (remote: 9: SD_SECURITY_FAIL zip from usb command in download mode)
finished. total time: 2.058s
And I can not open that zip file as well, 7zip said it can not open the file as archive. I checked md5 the it matched. I dont know what happen to the file. I afraid the file is corrupted so I downloaded twice to check but still no hope.
Any other suggestions please!!
You can't flash RUUs with fastboot anymore since the M9. They became too big and the normal fastboot isn't able to handle them anymore. Either you use the SD card method which is described in my sheet or you look for htc_fastboot.
As a sidenote: You are aware that RUUs are encrypted and therefore can't get opened the way you normally open archives, aren't you? Winrar isn't able to do so at all and 7-zip has to use "right-click > open > #". Nevertheless you won't have any benefit from opening it.
Sent from my HTC One M9 using XDA Labs
After doing some stuff i didn't remember, the phone is now Unlocked. I can be able to flash a TWRP 3.0.0 and flash a CandySix ROM. All the process was smooth. The phone can boot normally now. Thank you guys.
However, there is no Sense on CandySix ROM. I really want to upgrade to another ROM with Sense but i can't due to my current firmware. I dont know how to upgrade the firmware for that. I can't make my S-off using Sunshine also. Any suggestions where to start? Thanks.
Did you try the SD card method I described in my google sheet? Or did you download the needed htc_fastboot files if you prefer the command line? I had no problems with flashing the 2.10.710.5 RUU when I created my backups for the SKU 710.
Or did you try to use the TWRP backup guide in my sheet?
Otherwise if you're willing to pay around 20 bucks you could use llabtoofer's RUU service. Either google or use the link in my spreadsheet.
Sent from my HTC One M9 using XDA Labs
Flippy498 said:
Did you try the SD card method I described in my google sheet? Or did you download the needed htc_fastboot files if you prefer the command line? I had no problems with flashing the 2.10.710.5 RUU when I created my backups for the SKU 710.
Or did you try to use the TWRP backup guide in my sheet?
Otherwise if you're willing to pay around 20 bucks you could use llabtoofer's RUU service. Either google or use the link in my spreadsheet.
Sent from my HTC One M9 using XDA Labs
Click to expand...
Click to collapse
Thanks I have contacted llabtoofer for help. So afraid to do myself. Have been wasted tons of time for this but still not have any luck. Anyway thank you for your help. My phone is now usable, i used the htc_flashboot method to unstuck it.
HTC one m9 flash RUU help
iHave a Sprint HTC One M9 currently stuck in boot loop displaying
"This build is for
development purposes only
Do not distribute outside of HTC
without HTC's written permission.
Failure to comply may
lead to legal action."
I'm not sure of the CID nor firmware version(i'm sure it was the latest 3.41.651.4.) iForgot to backup my device before rooting(stupid iKnow.) I've already found the RUU for 3.41.651.4 it's saved to my SD card. iCan still reach bootloader, recovery&download mode, should iJust enter recovery&flash the RUU? iAlso have S-ON. iWould like to relock the bootloader&start the root process anew. iUsed TWRP 3.0.2 as well as Super SU 2.76 during my first initial attempt. I've already tried to lock the device once but when iType adb devices into the command window no device is displayed.
I'm not sure where to go from here. Can someone help?

HTC M8 Unable to flash ROM, RUU Error 155, 32 header error, etc

This is gonna be long, so BIG thanx in advance for reading this post.
I will give as much info as possible to let u guys better determine whats going on, be prepared for a long read.
I have been fiddling with android 4-5 years ago, but that's it, so I consider my self a noob.
here it goes...
1) I have purchased an "international ver. HTC M8 brand new" from amazon third party seller for 200.00 USD
2) came with many evidence showing it's not brand new, but well disguised to look like new. See details:
1. I can tell it's a resealed package from experience; cable is a generic one that tries to mimic the original HTC cable, and it only charges (no data transfer). The charge brick has no film and has micro scratches.
2. Phone has no carrier logo, boot screen has no carrier logo, system has no carrier bloatware. The firmware seems to be unlocked/developer, but the CID(T-MOB010) and MID(0P6B13000) of the phone is T-Mobile!
3. As a brand new phone, it came rooted and S-Off.
4. OTA update fails indicating device has been modified.
3) Coming from a marshmallow phone, I decided to manual upgrade to Android 6. I downloaded the unlocked/developer & T-Mobile RUU from HTC, but both update fails at the black screen with silver HTC logo. (I forgot to mark down the error code, since I'm still a bit rusty from couple of years not digging this deep.)
4) I went ahead and unlocked the bootloader through HTC dev, then performed the same RUU. Same result.
5) I setup adb, then performed CID and MID change to make it the Dev ver. (BS_US002 + 0P6B12000). Ran the same RUU, same result.
6) Then I extracted the zip from the RUU and placed it in the ext sd to flash in hboot. Result was an error of file being too big.
7) I installed TWRP recovery, used it to flash the zip, received error of extraction fail. performed RUU, same result as above, noticed the error 155.
8) Next at fastboot usb, performed command <fastboot flash zip 0P6BIMG.zip> ends up with FAIL and Remote: not allowed message.
9) Finally, I tried RUU mode. Ended with the 32 header error:
Code:
C:\fastboot-win>adb reboot bootloader
C:\fastboot-win>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.031s]
finished. total time: 0.031s
C:\fastboot-win>fastboot flash zip 0P6BIMG.zip
sending 'zip' (1537810 KB)...
OKAY [ 50.275s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
FAILED (remote: 32 header error)
finished. total time: 50.415s
C:\fastboot-win>
which according to Sneakyghost's post, he doesn't know what is the cause
http://forum.xda-developers.com/htc-one-m8/development/progress-fuu-m8-t2813792
I have dug through many xda post and google, but had no luck.
I felt pretty helpless and frustrated now, makes me wonder what is going on with this phone.
This is gonna be my last resort, pls if someone knows what's going on and how to fix this, teach me, Please!
feel free to ask about more info, I will try to explain in further details.
I give you the basic idea as I'm away from my PC.
1. To install the official marshmallow RUU exe, you need to fastboot flash its firmware first.
You should be able to find the official firmware in my thread linked in my signature on post #5
2. To fastboot flash a rom.zip, you need to use htc_fastboot not the generic fastboot which gave you the error.
Read this for 3 options on how to install rom.zip - http://forum.xda-developers.com/showpost.php?p=67314040&postcount=1749

[SOLVED] Please help... soft brick Bell M9

SOLVED UPDATE: I did some more reading. I took the Bell (BM) rom zip
(named "0PJAIMG_HIMA_UL_L50_SENSE70_ATT_BM_1.32.666.6_R2_Radio_01.01_U11440221_59.04.50303G_2_F_release_426170_signed.zip"), and renamed it to "0PJAIMG.zip".
Copied that to the root of a microSD card and put that into the phone.
Booted phone with VOLDOWN+POWER and the flash process began. It rebooted a couple of times during the process. It said to hit POWER to finish. After that, phone booted normally (like out-of-the-box again).
With that said, I still would like to have root... so would still appreciate any input as to what I did wrong below. Thank you!
Hello. I'm afraid I have messed my phone up a bit, and would really appreciate it if someone could help me out.
It's a Bell HTC One M9 (0PJA110), and it is (was?) on 5.0.2 Lollipop. According to the RUU EXE I just tried (unsuccessfully), it says it is an image version (or HTC system version) 1.32.666.6.
Here's what I did, from out-of-the-box. I just wanted root access so I could use Titanium Backup, so I read a bunch of threads to get started. I thought I had gathered enough knowledge, so I:
1) Unlocked bootloader via htcdev
2) Flashed "htc-one-m9-lollipop-twrp-2.8.7.0-hima.img" to recovery. (I chose this version because I read in some threads that version 3 or higher of twrp doesn't work well if it is flashed to a Lollipop phone).
3) Rebooted, went immediately into recovery (so that TWRP could ensure it doesn't get overwritten)
4) Then rebooted again, and went into recovery (to make sure TWRP was still there)
5) At this point, I should have let the phone boot normally, to make sure that was OK. But I did not... so I cannot tell if this is where my trouble began
6) Next, in TWRP, I flashed "SR1-SuperSU-v2.79-SR1-20161221223537.zip". It seemed to go well.
7) Reboot from TWRP.
8) Phone shows first HTC logo, then goes to a black screen (black but illuminated). That's it.
My next thing to try was this Bell TWRP zip from a nice post on here. Filename is "Stock_Bell_LP_5.0.1_1.32.666.30_TWRP.zip". I tried to flash it via TWRP but it failed right away (I do not have the exact output but can try again to get the text, it if that helps).
Naturally I was starting to get worried, so I immediately started looking for RUU's so I could start over.
1) I re-locked bootloader
2) I tried a generic RUU ("RUU_HIMA_UL_M60_SENSE70_ATT_MR_NA_Gen_Unlock_3.35.617.31.exe") but it would not flash - I assume it is checking CID and knows it's not correct for my phone
3) I downloaded a Bell-specific zip from Androidruu ("0PJAIMG_HIMA_UL_L50_SENSE70_ATT_BM_1.32.666.6_R2_Radio_01.01_U11440221_59.04.50303G_2_F_release_426170_signed.zip", verified the MD5 matched whatever androidruu.com said it was.
4) Renamed the zip to rom.zip to make the next commands easier
5) Ran "fastboot oem rebootRUU", verified the RUU screen appeared, then "fastboot flash zip rom.zip"
It didn't work Here is the output:
Code:
target reported max download size of 800000000 bytes
Invalid sparse file format at header magi
sending sparse 'zip' (67085 KB)...
OKAY [ 4.791s]
writing 'zip'...
(bootloader) HOSD CL#493992
(bootloader) ERR [SD_UPDATE_ERR] update_fb_ZIP_buf: can not find ZIP hea
(bootloader) der
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 22
(bootloader) ERR Update zip file failed.
(bootloader) ERR ZIP ERROR, exit read zip loop
(bootloader) ERR ZIP signature checking failed...
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 22
(bootloader) [email protected]
FAILED (remote: 22: fail to flash via downloadzip)
finished. total time: 8.552s
I wish I could try a Bell RUU exe... but I am having a hell of a time finding one.
Any advice would be appreciated (regarding anything I did wrong up above, or regarding how I can get myself out of this mess). Thank you for reading.
Download the latest RUU to your device. In dowload mode type fastboot oem rebootRUU. Entering the Htc screen, run RUU.exe.
Dark Stranger said:
Download the latest RUU to your device. In dowload mode type fastboot oem rebootRUU. Entering the Htc screen, run RUU.exe.
Click to expand...
Click to collapse
Thank you, but same result as my earlier attempt. The EXE itself can get the phone from bootloader mode/download mode into RUU mode, and it starts the process, but fails with "please get the correct rom update utility".
I assume it's because this RUU is not an exact match for my phone.

Categories

Resources