Lost root can't flash kernel - T-Mobile Samsung Galaxy S6 Edge

I originally followed this root method which work great.
http://forum.xda-developers.com/tmobile-galaxy-s6-edge/general/root-5-1-1-dummies-t3144105
My phone went into the black screen freeze. Only thing it would do was let me go into Download mode.
Looking back I should have just push Vol down to reboot phone but dumb me went and restarted the process from above.
I was able to flash the full firmware and that got the phone to work again but lost root.
Now when I go into Odin to flash kernel it will not allow me too.
Any suggestions is greatly appreciated.

Look like this FRP lock is not letting me flash kernel
NVM got it working. Mods please delete post. Thank You

Related

[Q] Attempted Factory Reset now locked out!

So this may be a stupid question (but it's my first post so go figure) but I've read a few forum posts and I still can't seem to find a resolution.
I'm using a Rogers SGH i3170 with Android 4.3. I used the cf auto root file to root my phone with ODIN and otherwise did not modify the original software I manually installed the SuperSu apk to get around KNOX.
I was going to sell the phone so I went into the backup & reset option to clear out all my information. the phone seemed to clear itself just fine but now it won't go back the 'samsung' boot screen.
It'll show the device name, do the boot animation and otherwise just sits there.
The battery is at 80-90%
My main issue is that I would flash the stock ROM but it also won't go into recovery mode. It just reboots without actually going there.
Did I just brick my phone?
**I'm fairly new to rooting, I've rooted my S4 and Nexus 5 and was able to reset them without issue through the menus without using CWM or TWRP. I'm familiar enough with the processes just need some direction I guess!
Try this: Vol down& power& home. That'll put you into download mode so you can use Odin to return to stock...
You can also try THIS
If that doesn't help then goHERE for more INFO:thumbup:
Sent from my SAMSUNG-SGH-I317 using Tapatalk
LENT0N said:
So this may be a stupid question (but it's my first post so go figure) but I've read a few forum posts and I still can't seem to find a resolution.
I'm using a Rogers SGH i3170 with Android 4.3. I used the cf auto root file to root my phone with ODIN and otherwise did not modify the original software I manually installed the SuperSu apk to get around KNOX.
I was going to sell the phone so I went into the backup & reset option to clear out all my information. the phone seemed to clear itself just fine but now it won't go back the 'samsung' boot screen.
It'll show the device name, do the boot animation and otherwise just sits there.
The battery is at 80-90%
My main issue is that I would flash the stock ROM but it also won't go into recovery mode. It just reboots without actually going there.
Did I just brick my phone?
**I'm fairly new to rooting, I've rooted my S4 and Nexus 5 and was able to reset them without issue through the menus without using CWM or TWRP. I'm familiar enough with the processes just need some direction I guess!
Click to expand...
Click to collapse
My guess would be depending on what options you chose for wiping your data you probably wiped the root folder.
in which case there is nothing to boot to.
I have done that before in error and its a pain.
If you still have a recovery great you just need to flash a ROM.
Otherwise you might have to ODIN a recovery back on and then flash. Which is what I had to do.

[Q] galaxy s3 I747 wont boot past Samsung Galaxy s3 Logo, Did i brick my phone???

I was trying to carrier unlock my phone, and to do that i tried to downgrade it 4.3 to 4.1.1, and only after i had pressed the button, i had noticed that this might brick my phone in a comment in one of the forums, this is what i did:
http://forum.xda-developers.com/showthread.php?t=2625461
after following this and trying to run odin with it, odin returned "FAIL", and due to my high level of stupidity at the time, i tried to use the original 4.1.1 as my PDA in odin right after, i didnt reboot or anything, just pressed start again with the other tar.md5 file....
so now i cannot go past the samsung galaxy s3 logo when booting. I CAN go into download mode though, but i have no clue what i am supposed to do afterwards
i have the Galaxy S 3 i747 (was 4.3 before the whole mess) at&t carrier, i am trying to unlock it because i am travelling and need a phone.
please help me fix it, i do not care about the warranty since i dont have it anymore anyways, as long as the phone is working
also, if possible, i also need to unlock it afterwards, any help is HIGHLY appreciated, thanks!
baruchadi said:
I was trying to carrier unlock my phone, and to do that i tried to downgrade it 4.3 to 4.1.1, and only after i had pressed the button, i had noticed that this might brick my phone in a comment in one of the forums, this is what i did:
http://forum.xda-developers.com/showthread.php?t=2625461
after following this and trying to run odin with it, odin returned "FAIL", and due to my high level of stupidity at the time, i tried to use the original 4.1.1 as my PDA in odin right after, i didnt reboot or anything, just pressed start again with the other tar.md5 file....
so now i cannot go past the samsung galaxy s3 logo when booting. I CAN go into download mode though, but i have no clue what i am supposed to do afterwards
i have the Galaxy S 3 i747 (was 4.3 before the whole mess) at&t carrier, i am trying to unlock it because i am travelling and need a phone.
please help me fix it, i do not care about the warranty since i dont have it anymore anyways, as long as the phone is working
also, if possible, i also need to unlock it afterwards, any help is HIGHLY appreciated, thanks!
Click to expand...
Click to collapse
Downgrading your boot loader from 4.3 is a guaranteed brick. I'm not sure if the brick will get you to the Samsung screen.
If you're already assuming its bricked reboot into recovery and do a full wipe. Restore a nandroid of something if you have one or try flashing a custom ROM. Because Odin failed maybe it never flashed the boot loader.
Worth a try
Sent from my SGH-I747M using XDA Free mobile app
baruchadi said:
I was trying to carrier unlock my phone, and to do that i tried to downgrade it 4.3 to 4.1.1, and only after i had pressed the button, i had noticed that this might brick my phone in a comment in one of the forums, this is what i did:
http://forum.xda-developers.com/showthread.php?t=2625461
after following this and trying to run odin with it, odin returned "FAIL", and due to my high level of stupidity at the time, i tried to use the original 4.1.1 as my PDA in odin right after, i didnt reboot or anything, just pressed start again with the other tar.md5 file....
so now i cannot go past the samsung galaxy s3 logo when booting. I CAN go into download mode though, but i have no clue what i am supposed to do afterwards
i have the Galaxy S 3 i747 (was 4.3 before the whole mess) at&t carrier, i am trying to unlock it because i am travelling and need a phone.
please help me fix it, i do not care about the warranty since i dont have it anymore anyways, as long as the phone is working
also, if possible, i also need to unlock it afterwards, any help is HIGHLY appreciated, thanks!
Click to expand...
Click to collapse
Welcome to the forum! Wished you'd come in much earlier though as you would have found you CANNOT downgrade from 4.3 to 4.1.1 to free unlock. Sorry, but once you are on 4.3, the surest way to unlock is to obtain the unlock code from the carrier or purchase one online. Sounds like you do have a soft brick. If your phone is still booting to the Samsung logo, then it's only a soft brick. Attempting to downgrade the 4.3 bootloader usually results in a hard brick so you may be in luck.
To fix this first, try to see if you can boot to recovery mode and do a hard wipe/factory reset. If you are able to boot to recovery (or download) mode then you have little to worry about. If the reset does not work, you can flash custom recovery via Odin and follow the instructions in the thread below to restore stock 4.3. Afraid, you have to revert to full stock 4.3 to get the phone back in working order and don't even think about 4.1.1.
http://forum.xda-developers.com/showthread.php?t=2658486
If you are not able to get to recovery, then you can see if you can boot from a debrick image following the instructions (on the first page) of the thread below ...
http://forum.xda-developers.com/showthread.php?t=2549068
Once your phone is working normally, you can request the unlock code from AT&T via the request form below. If eligible, they should provide this. Otherwise, you would have to buy one online ....
https://www.att.com/deviceunlock/client/en_US/
Let me know if you need any further help.
KorGuy123 said:
Downgrading your boot loader from 4.3 is a guaranteed brick. I'm not sure if the brick will get you to the Samsung screen.
If you're already assuming its bricked reboot into recovery and do a full wipe. Restore a nandroid of something if you have one or try flashing a custom ROM. Because Odin failed maybe it never flashed the boot loader.
Worth a try
Sent from my SGH-I747M using XDA Free mobile app
Click to expand...
Click to collapse
I tried wiping everything, i also wiped cache, still didn't boot, thanks though!
Larry2999 said:
Welcome to the forum! Wished you'd come in much earlier though as you would have found you CANNOT downgrade from 4.3 to 4.1.1 to free unlock. Sorry, but once you are on 4.3, the surest way to unlock is to obtain the unlock code from the carrier or purchase one online. Sounds like you do have a soft brick. If your phone is still booting to the Samsung logo, then it's only a soft brick. Attempting to downgrade the 4.3 bootloader usually results in a hard brick so you may be in luck.
To fix this first, try to see if you can boot to recovery mode and do a hard wipe/factory reset. If you are able to boot to recovery (or download) mode then you have little to worry about. If the reset does not work, you can flash custom recovery via Odin and follow the instructions in the thread below to restore stock 4.3. Afraid, you have to revert to full stock 4.3 to get the phone back in working order and don't even think about 4.1.1.
http://forum.xda-developers.com/showthread.php?t=2658486
If you are not able to get to recovery, then you can see if you can boot from a debrick image following the instructions (on the first page) of the thread below ...
http://forum.xda-developers.com/showthread.php?t=2549068
Once your phone is working normally, you can request the unlock code from AT&T via the request form below. If eligible, they should provide this. Otherwise, you would have to buy one online ....
https://www.att.com/deviceunlock/client/en_US/
Let me know if you need any further help.
Click to expand...
Click to collapse
I am able to get to recovery, but the first link isn't very clear.... i am not really familiar with odin and all this other stuff... lol, i am now downloading the files it says to download in the first link though, can you maybe tell me in a quick list what exactly im supposed to do?
thanks!
baruchadi said:
I tried wiping everything, i also wiped cache, still didn't boot, thanks though!
I am able to get to recovery, but the first link isn't very clear.... i am not really familiar with odin and all this other stuff... lol, i am now downloading the files it says to download in the first link though, can you maybe tell me in a quick list what exactly im supposed to do?
thanks!
Click to expand...
Click to collapse
It's time to start reading. Before doing any flashing/modding, you should make sure you understand what you're doing and know the risks.
Now as for Odin, it's quite straight forward. Phone needs to be in download mode, you put the PDA file in Odin and flash (if it's a Odin one-click, just need to hit start). One thing is to not interrupt it! Especially if flashing bootloaders cause that will brick your phone. Also, don't downgrade bootloaders.
There are a few guides in the sticky, I suggest you take an hour or two reading them so things like that don't happen again (or that you know what to do if it does).
GL!
baruchadi said:
I tried wiping everything, i also wiped cache, still didn't boot, thanks though!
I am able to get to recovery, but the first link isn't very clear.... i am not really familiar with odin and all this other stuff... lol, i am now downloading the files it says to download in the first link though, can you maybe tell me in a quick list what exactly im supposed to do?
thanks!
Click to expand...
Click to collapse
Alright. If wipe/reset didn't work, you'll need to restore full stock 4.3 via custom recovery. Here's what we need to do....
1) Download the Odin flashable *.Tar file for custom recovery. I prefer TWRP because of the GUI so that's where I'm pointing you to ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
2) Download the stock restore file for 4.3 from the thread below... If you are using TWRP, then the first link is the one you need
http://forum.xda-developers.com/showthread.php?t=2658486
3) Copy the stock restore zip file to a good quality (micro) SD card
4) I presume you have Odin already so you will use this to flash custom recovery to your phone. Run Odin.exe on your PC. If you are using Odin v.3.09 then you need the AP tab. For all other versions, use the PDA tab. Navigate to the custom recovery *.Tar file you downloaded earlier and place this in the PDA (or AP tab). Leave the default settings as is and do not check/uncheck any boxes other than the default settings.
5) Boot the phone to download mode via the 3-button combo (Volume Down/Home/Power). When you get to Odin (Download) mode, press volume up to continue. Connect the phone to your PC with a good quality micro USB cable. Wait until Odin has recognized the device then click on the Start button to start firmware installation (flashing). Wait for the flashing to end and the <Pass> message. Disconnect the phone from the PC and pull the battery to stop auto reboot.
6) Place the micro SD card with the stock restore zip in your phone. Replace the battery and boot to recovery mode. If you were successful with the firmware flashing above, it should boot you to custom recovery.
7) Select install from external card and navigate to the stock restore zip file. Select this file and swipe the screen to start firmware installation. Wait for installation to complete. Then clear your cache/dalvik and reboot to system.
This will hopefully do it.

[Q] N7100 stuck at boot screen after flashing stock 4.4.2

Hi all, hope somebody can rescue me!
I have an N7100. It's been running stock ROM 4.1.2 for ages (rooted). I've rooted and loaded ROMs on a fair few devices over the years, but typically by following step-by-step guides - I'm a noob to all intents and purposes.
Last night I decided to upgrade to 4.4.2.
I did it without performing a wipe first.
Backed up apps and settings using Titanium Backup Pro
Downloaded N7100XXUFNE1 from Sammobile (sammobile.com/firmwares/3/?download=32635)
Loaded it via Odin 3.9
It worked, in a fashion, maintaining most of my data and apps etc, but I couldn't get wifi to turn on and I kept getting error messages saying '[App X] could not be loaded'
I decided to bite the bullet and do a factory reset (by booting into recovery).
I still couldn't get wifi to work, but my bootloader had stayed at ME3, so I decided to apply the latest bootloader (ND3) as I read somewhere that this could be the issue (I wasn't overly concerned about Knox as the phone is almost 2 years old now anyway).
I applied it via ODIN again, except loading the file into the 'BL' section rather than the 'AP'.
Since doing that, it's stuck at the boot screen 'Samsung Galaxy Note II GT-N7100' and the only way to get out of it is to pull the battery.
I can got into 'Download Mode' but not into 'Recovery Mode'.
I have tried applying MJ5 bootloader.
I have tried reinstalling the whole stock again ROM again
I have tried applying Philz_Touch_6.07.9-n7100 recovery
All show as having completed successfully in Odin, but none of them changed anything - I'm still stuck at the boot screen
Does anybody have any ideas of what else I might try?
Thanks
Beardy
beardyweirdy said:
Hi all, hope somebody can rescue me!
I have an N7100. It's been running stock ROM 4.1.2 for ages (rooted). I've rooted and loaded ROMs on a fair few devices over the years, but typically by following step-by-step guides - I'm a noob to all intents and purposes.
Last night I decided to upgrade to 4.4.2.
I did it without performing a wipe first.
Backed up apps and settings using Titanium Backup Pro
Downloaded N7100XXUFNE1 from Sammobile (sammobile.com/firmwares/3/?download=32635)
Loaded it via Odin 3.9
It worked, in a fashion, maintaining most of my data and apps etc, but I couldn't get wifi to turn on and I kept getting error messages saying '[App X] could not be loaded'
I decided to bite the bullet and do a factory reset (by booting into recovery).
I still couldn't get wifi to work, but my bootloader had stayed at ME3, so I decided to apply the latest bootloader (ND3) as I read somewhere that this could be the issue (I wasn't overly concerned about Knox as the phone is almost 2 years old now anyway).
I applied it via ODIN again, except loading the file into the 'BL' section rather than the 'AP'.
Since doing that, it's stuck at the boot screen 'Samsung Galaxy Note II GT-N7100' and the only way to get out of it is to pull the battery.
I can got into 'Download Mode' but not into 'Recovery Mode'.
I have tried applying MJ5 bootloader.
I have tried reinstalling the whole stock again ROM again
I have tried applying Philz_Touch_6.07.9-n7100 recovery
All show as having completed successfully in Odin, but none of them changed anything - I'm still stuck at the boot screen
Does anybody have any ideas of what else I might try?
Thanks
Beardy
Click to expand...
Click to collapse
What happens when you try to reflash the stock 4.4.2 firmware via odin that u downloaded?
beardyweirdy said:
Hi all, hope somebody can rescue me!
I have an N7100. It's been running stock ROM 4.1.2 for ages (rooted). I've rooted and loaded ROMs on a fair few devices over the years, but typically by following step-by-step guides - I'm a noob to all intents and purposes.
Last night I decided to upgrade to 4.4.2.
I did it without performing a wipe first.
Backed up apps and settings using Titanium Backup Pro
Downloaded N7100XXUFNE1 from Sammobile (sammobile.com/firmwares/3/?download=32635)
Loaded it via Odin 3.9
It worked, in a fashion, maintaining most of my data and apps etc, but I couldn't get wifi to turn on and I kept getting error messages saying '[App X] could not be loaded'
I decided to bite the bullet and do a factory reset (by booting into recovery).
I still couldn't get wifi to work, but my bootloader had stayed at ME3, so I decided to apply the latest bootloader (ND3) as I read somewhere that this could be the issue (I wasn't overly concerned about Knox as the phone is almost 2 years old now anyway).
I applied it via ODIN again, except loading the file into the 'BL' section rather than the 'AP'.
Since doing that, it's stuck at the boot screen 'Samsung Galaxy Note II GT-N7100' and the only way to get out of it is to pull the battery.
I can got into 'Download Mode' but not into 'Recovery Mode'.
I have tried applying MJ5 bootloader.
I have tried reinstalling the whole stock again ROM again
I have tried applying Philz_Touch_6.07.9-n7100 recovery
All show as having completed successfully in Odin, but none of them changed anything - I'm still stuck at the boot screen
Does anybody have any ideas of what else I might try?
Thanks
Beardy
Click to expand...
Click to collapse
Have you tried flashing TWRP instead? This happened to me and got stuck on recovery boot, CWM and Philz Touch wonb't load. Flashed TWRP and worked like a charm.
I am having similar problem.
Tried to flash the TWRP Recovery from THIS via Odin.
Still phone isn't going past the Galaxy Note II logo.
Sidz4u said:
What happens when you try to reflash the stock 4.4.2 firmware via odin that u downloaded?
Click to expand...
Click to collapse
Thanks for the reply.
It processes OK and Odin says 'Pass!', but then it automatically restarts and gets stuck at the boot screen again. Still can't boot into recovery mode.
AliverMD said:
Have you tried flashing TWRP instead? This happened to me and got stuck on recovery boot, CWM and Philz Touch wonb't load. Flashed TWRP and worked like a charm.
Click to expand...
Click to collapse
Thanks for the suggestion. Just tried that, but unfortunately it just does the same thing ....
Man do this.....
Get older odin (personally my preferance nothing else)
Flash the latest stock rom that u have
It will say pass and the device will go into bootloop
Now remove battery any stick it in (just to stop bootloops)
Enter recovery (that shld be stock now)
And do a factory reset
If no recovery......get a custom one and do it
Then let the phone do its thing:good::good:
---------- Post added at 10:36 AM ---------- Previous post was at 10:32 AM ----------
If u have any wifi or other issues.....flash the new bootloader. ....with AP not the BL...and done....
Hope this helps......cheers:good:
devrog17 said:
Man do this.....
Get older odin (personally my preferance nothing else)
Flash the latest stock rom that u have
It will say pass and the device will go into bootloop
Now remove battery any stick it in (just to stop bootloops)
Enter recovery (that shld be stock now)
And do a factory reset
If no recovery......get a custom one and do it
Then let the phone do its thing:good::good:
---------- Post added at 10:36 AM ---------- Previous post was at 10:32 AM ----------
If u have any wifi or other issues.....flash the new bootloader. ....with AP not the BL...and done....
Hope this helps......cheers:good:
Click to expand...
Click to collapse
Thanks for the suggestion. I've tried doing just that (although not on an older version of Odin) and it hasn't helped, I can't get into recovery.
I will give flashing the Bootloader a go via the AP rather than BL when I get back from work tonight though. Cheers.
beardyweirdy said:
Thanks for the suggestion. I've tried doing just that (although not on an older version of Odin) and it hasn't helped, I can't get into recovery.
I will give flashing the Bootloader a go via the AP rather than BL when I get back from work tonight though. Cheers.
Click to expand...
Click to collapse
Yes try with older odin.......and also flashing bl via AP
Hope it helps......
DO HIT THAT THANKS BUTTON IF U FEEL I TRIED TO HELP U......
devrog17 said:
Yes try with older odin.......and also flashing bl via AP
Hope it helps......
DO HIT THAT THANKS BUTTON IF U FEEL I TRIED TO HELP U......
Click to expand...
Click to collapse
Just tried, but to no avail again. Thanks anyway. Anybody else got any suggestions as to what I might try? I'm starting to lose hope a bit here
Try to boot in recovery and do a factory reset
devrog17 said:
Try to boot in recovery and do a factory reset
Click to expand...
Click to collapse
Hi, I do appreciate you're only trying to help but, as explained numerous times in the thread, that's my whole problem.
In summary:
The phone gets stuck on the boot screen
I can't boot into recovery
I can only get into the odin download screen
Flashing a full stock rom doesn't change anything
Flashing Philz, TWRP or CW Recovery doesn't change anything
Reflashing the bootloader doesn't change anything
C
beardyweirdy said:
Hi, I do appreciate you're only trying to help but, as explained numerous times in the thread, that's my whole problem.
In summary:
The phone gets stuck on the boot screen
I can't boot into recovery
I can only get into the odin download screen
Flashing a full stock rom doesn't change anything
Flashing Philz, TWRP or CW Recovery doesn't change anything
Reflashing the bootloader doesn't change anything
Click to expand...
Click to collapse
Just to close this thread off, I've now paid to get the phone sorted at a local shop. Took them a while (think their first level support just tried all the things I'd already done), but their occasional staff member and all round guru managed to get it sorted. I don't know what he did as I didn't get the chance to speak to him. Cost me £30.

[Q] Help Unrooting!

Please don't refer me to any more threads or forums........
I'm sure this has been done and done and talked about but I've been reading the **** out of forums and comments for a few hours now and trying to unroot my Sprint LG G2.
I had it running stock like a champ. rooted it. worked great. then I was attempting to flash lollipop and it required a recovery update (No Problem) I downloaded the correct files and bam! it says your phone is not rooted this requires a root (or something like that) I was already rooted SuperSU installed and root checker said I was fine. so what the hell I swipe to root while inside recovery and it goes to some black screen with tiny text saying fastboot: processing commands and won't leave the screen. I tried booting into recovery and same thing happens. Tried to reboot normal and I'm stuck on the LG logo with my led flashing between blue and green slowly. I CAN boot into download mode and I'm following this
http://pastebin.com/WTm1xFXz
and this
http://forum.xda-developers.com/showthread.php?t=2687929
to unbrick but having this error "Failed PreviousLoad()
Did I not get the right .dll file? I doubt it cause I only saw one...or is it the wrong .tot file? there was 3 or so
http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware
Please help!
When i'm in download mode the phone does say I am rooted. is there a way to just re-flash recovery and restore from my backups I did before all this? if I have to wipe this thing clean and start over I don't really mind I just need to get my phone back haha this is the first time this has ever happened to me and I consider myself tech savvy so idk what I did here (except re rooting in recovery like an idiot) thanks so much!
First question, is the download mode you see with a small status bar or the big one?
If you have the big one, download mode should work. The f flash software will verify the tot file. If that goes through you should be golden.
When it asked you in TWRP to root, that is a message telling you system or ROM file did not take.
If you want cm12, use zv8 tot. Root, auto-rec, update TWRP with blastgator bumped TWRP 2.5.1. Flash cm ROM or aosp, then gapps. And go

Need a little help rooting

Sorry for being a n00b. I am not a rooting n00b, just a n00b when it comes to the new Samsung security features.
I have a Tmo Note 3. I want to install a custom ROM and recovery. I tried (and failed) to follow the instructions in the thread. I'm a bit ADD, so following all the redirects messed me up. Here is what I did:
1) Followed direction in the CF Auto root thread. This did give me root and that still works.
2) Installed TWIRP for Tmo Note 3. This install went fine until I rebooted
3) when I rebooted I got an error that my recovery was not stock and got stuck in a boot loop.
4) Gave up and flashed back to stock
I'm running Android 5.0, have root through CF, what do I need to do to get a custom recovery (don't really care which) and a ROM on my phone?
Thanks and sorry again for being a n00b.
Did you do this?
AFTER THE ROM IS FLASHED, THE PHONE WILL REBOOT AND YOU WILL SEE A BLUE BAR FOR A FEW SECONDS, AFTER THIS BLUE BAR DISAPPEARS, THE PHONE WILL REBOOT AGAIN; AT THIS MOMENT YOU MAY WANT TO BE READY AND BE ALREADY PRESSING VOLUME DOWN + HOME BUTTONS. THE IDEA BEHIND THIS, IS TO CATCH DOWNLOAD MODE BEFORE THE OS (LOLLIPOP) ACTUALLY BOOTS FOR THE FIRST TIME. THIS WILL SOLVE THE CF-AUTO-ROOT OR TWRP NOT STICKING REPORTED BY SOME USERS
Thanks
TEKHD

Categories

Resources