Related
ROM LG G2 PRO2 V5 FINAL FOR LG G2 LOLLIPOP ANDROID 5.0.2 BY ACURA2201 D802/5/6
With permission of the developer I share this amazing rom
First PORT Pro2 with Fm Radio, Pull Down Notifications on screen lock, Qvoice Spanish, Split Screen and Small Screen.
FULLY DEODEXED ROM
Do not hotlink to other forums excluding the original thread rom.
ORIGINAL LINK DEVELOPER
http://www.htcmania.com/showthread.php?t=994765
===============================================
READ READ READ!! WARNING OTHER MODEL PHONES READ READ READ!!
Only for D-802 - Model 805 - Model 806
Do not install under no circumstances in other phone. It contains partitions for version KITKAT D-802, D-805, D-806.
If you install the ROM in other model, the phone won't turn on again after rebooting.
**************************************************
READ READ READ!! FOR MODELS D-802 D-805 D-0806 READ READ READ!!
** By installing this ROM you’ll have the official version of LG Kitkat bootloader “G”. This is necessary for operating the new lollipop’s kernel. The last step is an absolutely necessary and sooner or later you will have to do if you want to use versions Lollipop. Whether from a custom rom or official OTA.
** Changing means that all kernels to install form this time must be bumped, If you want to install a new one after going through this ROM.
** All installations required Kernels bumped Lollipop ROM. To install bumped Kernels never use recovery Philz. This recovery patch the kernel and recovery, making your phone useless after a reboot.
**************************************************
------------------------------------------------------------------------------------------
READ READ READ INSTALLATION FOR MODELS D-802 D-805 D-806 READ READ READ
First and before installing this rom change the recovery immediately. Always use TWRP recovery, is absolutely necessary for avoid installation problems. If you are using Philz you may lose the recovery and the boot.
Second, perform a complete backup of your current ROM in order to back at any time. As long as the kernel version to recover is bumped.
If you want to install a new ROM after installing this one remember also to install a KitKat modem and a bump kernel. If you don’t you won’t pass the LG logo.
If you want to operate a Kernel that use Loki you must downgrade the bootloader to Jellybeam for D-802, D-805 and D-806.
---------------------------------------------------------------------------------
THE ROM:
* The ROM is official based of PRO2 D-838-20H. It’s adapted to operate in our phone and our model. But everything else is Pro2.
* The ROM have a “Fix” for me in binary code, to avoid the loss of signal and adjust the band to Europe. This binary is activated from the kernel. If you use another kernel or remove the binary signal can have losses and FC Phone.
* In this version everything works.
IT INCLUDES:
- LG official version Pro2. 20H. Including icons based L.
- All LG programs, you know that I like STOCK ROM, including LG HEALTH.
- Dual Window.
- One hand operation.
- Hiding keys.
- Ten Themes.
- Adaway.
- Task Manager.
- Compass (Arde Dev Team).
- EasyHome.
- Added call control to see from the window in the Official cover LG.
- The camera records and works in all formats without changing the build.prop as D-838. Now your phone will always be D-802, D-805 and D-806 work all the extras included.
- Automatic detection of OTG, headphones or USB connection.
- More…
CHANGE LOG:
- Repaired all bugs of previous versions.
AROMA MODS SELECTABLE FROM NOW:
** Select models 802/5/6.
** Selection of 3 modems for the D-802.
** Selection of 1 modem for D-805 and D-806.
** You can select Clock in the center or left and battery 1%.
** NavBar from 39Dpi (Series) to 24Dpi.
** Choose between 3 sound modes, Series, medium and high. Repaired, the average middle and high sounds without distorting.
** And many other details
** More…
KERNEL:
The kernel is the same for all models of the G2 include the ROM. It unifies all in one kernel to avoid questions of different models on the same thread, so we can avoid confusion, not to mention that everyone can enjoy the advances regardless of your model.
* Source Code Official LG Lollipop for LG G2.
* Modified parameters to save battery.
* New governor Acura is included. With this governor is achieved a good performance with a good consumption. If you want it even more battery save, but less performance, change to OnDemand.
* The kernel does not include overclocking.
* Optimized use of the GPU to make it more effective speed changes.
* Selected idle speed 200Mhz GPU. 320Mhz stock.
* Fixed GPU simple ondemand governor.
* New options for Governor.
* New options for I / O for reading.
* Reading 1024kbs.
* Little tweaks to improve Source.
REMEMBER, IN CASE OF ANY PROBLEM ENTER INTO RECOVERY AND RESTORE YOUR BACKUP.
IMPORTANT!! FIRST INSTALL THE LATEST VERSION OF TWRP RECOVERY!! BUMPED RECOVERY IS NECESSARY!!
INSTALL ONLY D802/5/6
1- Install the latest version TWRP 2.8.6.1 (Bumped necessary)
2- Make a backup.
3- Wipes (Dalvik, Cache & Data, AROMA will wipe the system).
4- Install.
5- Configure AROMA (Yes, is in Spanish)
5- Enjoy!!.
DOWNLOAD ROM
MIRROR 2
Acura2201
XDA: DevDB Information
LG G2 PRO2 V5 FINAL - ROM for the LG G2
Contributors
Acura2201
ROM OS Version: 5.0.2 Lollipop
Version Information
Status: Stable
Current Stable Version: V5
Stable Release Date: 2015-04-28
Created 2015-04-28
Last Updated 2015-04-28
Images.
Signal errors, flash other modem. Model D802 only! and D805 fix signal.
Baseband LG 30D Vodafone D802
Baseband LG D805 Fix signal
Mods.
Mods navbar, clock and sound
Launcher Stock 6x5
Launcher Stock 6x5 icon Home modified
Launcher Stock 7x5
Launcher Stock 7x5 icon Home modified
Fixes.
Fix LGVideoEditor
Fix LockScreen
Fixes Black Notifications
Kernel.
New Kernel: GPU Governor, Acura dynamic (battery) and Acura interactive (performance)
Great stuff! @
Nice, I'll test it tomorrow as it's too late to make a backup now.
I'll report back if I would find any issues. Thanks for sharing:good:
Edit: well I installed it and I could just upgrade from optimusg3 to it and thats nice without any real issues. The only thing that sucked was that the installer waa not in english. So I thought like okay, lets just press this. And I guess that that change made my widgets different :l so I have to reinstall the whole thing again to have it normal. When it comes to kernel you also have 3 choices but I will use google translate I guess for installing next time.
But further no bugs. Only thing that I miss is dorimanx[emoji14]
Instructions are a bit confusing, but i'm going to try it. Hopefully it works better than GRola
I installed the ROM and everything work just fine.But some of the themes have bugs after changed some icons become pixelated...But overall great rom..Need to test more if i found any bugs i will report.Gj developer..
:thumbup:
Sent from my LG-D802 using XDA Free mobile app
hambalos said:
I installed the ROM and everything work just fine.But some of the themes have bugs after changed some icons become pixelated...But overall great rom..Need to test more if i found any bugs i will report.Gj developer..
:thumbup:
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
Sent from my LG-D802 using XDA Free mobile app
Added modem and mods. Post 2.
SoMeiBoL said:
Added modem and mods. Post 2.
Click to expand...
Click to collapse
The link of mods not work
samtab37 said:
The link of mods not work
Click to expand...
Click to collapse
Thanks, fixed!
Thanks, this rom is amazing, the best for me !
Are camera drivers from LG G2 or from LG G Pro 2?
I'm interested if can someone confirm me that signal is stable, GPS, Radio FM, NFC are working and share some battery statistic (life/DOT)
can someone post the MD5 value of the download file.. pls
Bug on network signal LTE or 4G icon on the TOP of the signal is missing but i can browse on internet PROBLEM iS I dont know if i am connected to LTE or HSPA.
Sent from my LG-D802 using XDA Free mobile app
mss1988 said:
Are camera drivers from LG G2 or from LG G Pro 2?
Click to expand...
Click to collapse
I think it is LG G Pro 2.
Another bug from the notification panel i cant turn on the data signal but on the settings menu i can turn on and off the data.
Sent from my LG-D802 using XDA Free mobile app
mss1988 said:
Are camera drivers from LG G2 or from LG G Pro 2?
Click to expand...
Click to collapse
LG G PRO 2, you can record in slow motion and 4K resolution
SoMeiBoL said:
LG G PRO 2, you can record in slow motion and 4K resolution
Click to expand...
Click to collapse
I can tell the difference.
Just take picture of someone's face in complete darkness with flash turned on and I will tell which drivers is used.
hambalos said:
Another bug from the notification panel i cant turn on the data signal but on the settings menu i can turn on and off the data.
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
How you installed? You did clean install? It works for me correctly.
CyanogenMod is discontinued.
This ROM is continued as a LineageOS ROM.
Check the G800F LineageOS ROM for more info.
This is a CyanogenMod 13.0 ROM for the Exynos3470 based Samsung Galaxy S5 mini (G800F/G800M/G800Y) by CTXz and hennymcc.
DO NOT USE IT FOR G800H OR YOU WILL BRICK YOUR DEVICE
Although G800F and G800H share the same name they are not related in terms of hardware due to the different SoCs used (Exynos vs. Snapdragon).
Hence please do not ask for support or ROMs for the G800H.
Working features
Internal Root
Brightness slider
Option to use soft keys
Additional settings (Buttons menu in settings)
HW accelerated GUI
Camera (pictures+video: Back+Front)
MTP storage
Flash Light
Bluetooth (A2DP, HFP, HID)
IR
Lock Screen
Sound
SMS
Initiate and receive calls
Wifi
Mobile Data
USB-OTG (Keyboard, Mouse, USB-Audio, Mass-Storage)
NFC
Hardware sensors (Orientation, Compass, Proximity, Acceleration, Hall sensor, Step counter)
Light sensor (needed for auto-brightness)
Pulse sensor (preliminary and very inaccurate. Works with Apps like Kardiograph)
SD-Card as internal storage (new Android M feature)
GPS
Multi-Window support (new experimental CM setting, can be enabled via developer settings)
Fingerprint scanner
Non-working features:
SELinux
Known issues:
See the Bug Report section of this thread
Disclaimer:
You flash this image at your own responsibility. I am not responsible for any damage that might be caused by flashing this image (bricked device, lost data, ...)
Flashing this kernel image will trigger the KNOX counter, so your warranty will be void.
Applications that use KNOX (e.g. "Private Mode") might not work anymore when returning to the stock ROM, as the device is regarded as compromised. Do not flash this ROM if you need those applications.
The image is only for Exynos3470 based S5 Mini variants SM-G800F/M/Y.
It might be instable, crash your device, drain your battery, or even might damage your smartphone (e.g. if an USB-OTG device drains too much power)
Some users reported that their touch-screen stopped working permanently after some weeks of usage. For some user's (two at the moment including me) NFC stopped working permanently. Probably this issues are not related to this ROM as also many stock user's complain about hardware issues (random reboots, black screens, unresponsive touchscreen) but you have been warned.
Backup your data before flashing and check if the original firmware is present (e.g. at SamMobile)
Click to expand...
Click to collapse
Before you start:
Backup your data, like call history, contacts, sms, WhatsApp messages, favourite app settings that are on internal and external sd (by using Titanium Backup or other apps available on PlayStore). At least all internal data will be lost in any case. If you have bad luck you might also loose data from your external sd card.
Download:
Odin3-v3.07 (it is contained in CF-Auto-Root)
TWRP 3.0.0 recovery image [25/03/2016] (AndroidFileHost Mirror)
The newest CM 13.0 releases as well as the latest TWRP can be found here:
https://aykevl.nl/android
-Credit and thanks to @ayke
CM 13.0 ROM for G800F/M/Y (Android File Host)
Google Apps (contains Google Play, ...) for Android 6.0, one of the following two is recommended:
Open GApps Project, Platform:ARM, Android:6.0, Variant: whatever you prefer (e.g. "mini" or "nano")
Install recovery:
Reboot your device into Odin mode: turn off your device, then press Volume-Down + Home + Power button at the same time and release them.
Confirm the following warning message with the Volume-Up button.
Connect your device to your PC via USB
Make sure the device driver's are installed on your PC
Start Odin
In Odin select PDA and select the recovery image (recovery.tar.md5)
Check that only "Auto Reboot" and "F. Reset Time" is set
Click on "Start": the kernel image should be flashed now and the device should reboot afterwards. By flashing the recovery, your warranty will be void.
After the recovery flashing process was successful, power of your device. If not restart into Download mode and flash again or flash the stock rom.
Before you flash:
You need the latest TWRP recovery (see above). Otherwise TWRP might not be able to flash the ROM. This is because TWRP checks now if the device is "supported".
Wipe the device to avoid problems with remaining files from the old installation (see instructions below). This also applies if you already installed an older version of CM 13.0.
Flash CyanogenMod:
Reboot into recovery mode (Press Volume-Up + Home + Power button)
If you come from a stock ROM, this is your opportunity to make a Backup of your phone(Backup, then select Boot, System, Data, then swipe to backup). Note that the recovery might fail to restore the backup when you want to go back to the stock ROM (for me it got stuck after a restore during boot. But the backup was made with a different version of TWRP, so it might work in general) - simply do not expect too much of it at the moment.
If you haven't copied the installation files yet, you can now copy the GApps and CyanogenMod zip to your internal sd or external sd (be careful not to put the files into the data directory of the internal sd card as this will be deleted in the next step). Be sure that MTP is enabled (inside Mounts, click on Enable MTP), then, from your pc, copy the files. If MTP does not work from recovery, try it directly from Android or remove the external sd card from the phone and put it into your PC.
Wipe Dalvik Cache, Cache, System and Data (inside Wipe -> Advanced Wipe). Do not report problems if you did not wipe those partitions as the problems are most probably related to this!
Install the CM 13.0 ROM zip-package
Install the GApps zip-package
How to root:
No SuperSu is needed as CyanogenMod already comes with integrated root support. Root access is disabled by default.
You normally do not need root access. If you want to activate root access for apps, do the following:
Open the Settings menu, select "About Phone"
Tap on the "Build number" entry seven times. You should be notified, that the developer settings are now active.
Open the Settings menu, select "Developer options". Enable root access by selecting "Apps" in the "Root-Access" setting.
In case you want to go back to the stock ROM:
lf you do not have the latest ROM for the G800F you can download it from SamMobile
Reboot your phone into Odin mode
Open Odin on your PC and connect your smartphone with your PC via USB
If you have a zip-file unzip it so that you have a .tar.md5 file
In Odin click on the PDA button and select the .tar.md5 file. Then press "Start".
Normally the stock rom fails to boot as the data from CM is still on the data partition. So after flashing the stock rom, reboot into recovery mode (it looks a bit different now). First wipe the data partition, then wipe the cache.
Reboot
Changelog
Code:
25/03/2016:
* USB OTG disabled by default for improved waterproofness (can be re-actived via Advanced Settings App)
* how to enable USB OTG:
* start the "Advanced Settings" App
* open the "USB-OTG Mode" setting
* select "Powered (Not waterproof)"
* add support for call recording
* how to record a call:
* start/Receive a call with the CM Dialer App
* During call open settings (icon: three vertical dots)
* Select "record call"
* (if you get an error message that recording failed, try to enable developer settings and enable root access for apps+adb)
* how to playback recorded call:
* open the call history in the Dialer app (icon: clock symbol)
* open details of recorded call
* in the detailed calling list, click on the play button for the recorded call
* removing fingerprints works now
* updated some stock libs with LP versions
* support for F2FS (needs new TWRP recovery)
* updated TWRP recovery (with F2FS support)
* synch with latest CM sources
22/02/2016:
* Fixed lock-screen freeze
* Fixed Infrared support
* Fixed search for mobile networks (search will take ~1min until results are shown)
* Updated some libs with LP versions
* Initial support for a fingerprint scanner
* Sync with CM sources
16/02/2016:
* Fixed camera problems with WhatsApp
* Fixed preferred radio family settings (LTE/GSM/...)
* Added default long-press actions for home and app-switch buttons (DJSteve)
* Switched to LP kernel (G800FXXU1BOL4)
* libsensors: replaced with open source implementation (fixes light sensor which is needed for auto-brightness)
* Preliminary (and very inaccurate) support for heart-rate sensor
* Update to TWRP 3.0 (TWRP 2.x will still work)
* Sync with CM sources
30/01/2016:
* Fixed BT calling problems (only noise)
* CM Camera replaced with CM Snap Camera
* better image quality (check picture quality settings), resulting in image file sizes of > 1MB instead of 200KB
* Saving images to SD card supported (check settings)
* Improved RIL support
* Use stock soft-key layout (left capacitive button is app-switch instead of menu now)
* Key-layout can be configured via button settings.
* Fixed adb root problem (root permissions were lost after reboot)
* SamsungServiceMode app works now
* Sync with CM sources
14/01/2016:
* Add soft keys option under settings > buttons
* Fix crash after hanging up call
* Sync with newest CM sources
31/12/2015:
* Receiving calls works now
* psyafter: SD-Card can be used as internal storage (new Android M feature).
Can be used to store photos on SD-Card.
IMPORTANT: the SD-Card will be formatted if you activate this feature.
* GPS works now
* Sensors work now (Orientation, Compass, Proximity, Acceleration, Hall sensor, Step counter).
Light and Pulse sensors do not work yet.
* Youtube/Screencast crash fixed
26/12/2015:
* Wifi and Mobile Data work
20/12/2015 Hennymcc :
* Audio Fix
- Audio is now working (Still a bit quiet though)
- Making Calls is now working
14/12/2015 Hennymcc, CTXz :
* 6.0.1
- Updated to Android 6.0.1
- Fixed reboot when locking phone
- Fixed Internal Root in developer options not working
30/10/2015 CTXz :
* Added 'Buttons' settings
- Integrated Buttons/Capacitive Keys menu into settings
- Double tapping or holding button to open camera now works (In CM12 it didn't work)
- Power Menu is added under buttons menu
- Minor fixes
-!- NOTE : Setup Wizard may have some issues/crashes with this build. I will exclude it in the next one
29/10/2015 CTXz :
* Synced to newest sources
- Ugly looking Google search box removed
28/10/2015 CTXz :
* Changed from eng to userdebug
- No more red frames flashing
- Fixed Browser crashing
- Fixed crash after first boot
- More user friendly
- No additional boot.img flashing required
28/10/2015 hennymcc:
* First CM 13.0 test-build
This section is for developers:
A README file with build instructions can be found here:
Code:
https://github.com/cm-3470/android_device_samsung_kminilte
Sources:
Code:
https://github.com/cm-3470/android_device_samsung_kminilte
https://github.com/cm-3470/android_vendor_samsung_kminilte
https://github.com/cm-3470/android_kernel_samsung_kminilte
https://github.com/cm-3470/android_device_samsung_smdk3470-common
Developers welcome
At the moment the G800F/M/Y specific port of this ROM is only done by two persons (CTXz and hennymcc). Although Unjustified Dev also works on this ROM he does not own an Galaxy S5 Mini but a Galaxy Light which has a similar base but is different when it comes to camera, nfc and other components (maybe even slightly when it comes to audio and radio).
Help from other developers is always welcome. See the bug/feature section and this thread to see what is missing. Just give some short info (here in this thread or PM) that you want to work on some issue or feature so that work can be synchronized. Maybe there are also other devs that want to work with you on the same issue.
Knowledge in how the kernel works and good programming skills in C, C++ and Java would be nice but not necessary for all problems. At least you should be able to build the ROM and test your changes yourself but you do not need experience in porting ROMs.
Thanks to CTXz for his awesome work on getting Marshmallow to the G800F
Thanks to spookcity138 and ayke for providing new builds of this ROM.
Thanks to Psyafter for some patches and working on the G800F.
Thanks to Unjustified Dev from Team Regular for the initial work to get the G800F ready with CM.
XDA:DevDB Information
[G800F/M/Y][ROM][6.0][MHC19J] CyanogenMod 13.0 for G800F/M/Y [Beta 25/03/2016] [eol], ROM for the Samsung Galaxy S5 Mini
Contributors
hennymcc, CTXz, spookcity138, psyafter, Unjustified Dev, ayke
Source Code: https://github.com/cm-3470
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP Recovery [version >= 15/08/2015]
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-10-28
Last Updated 2017-01-26
If you already flashed stock LP, you will get the following message on boot:
KERNEL/RECOVERY IS NOT SEANDROID ENFORCING
If you wait for some seconds (or press some buttons) the message text turns blue:
KERNEL/RECOVERY IS NOT SEANDROID ENFORCING
and after some seconds (or buttons presses) CM will start.
Reserved
You (both of you) are making a great job !
Envoyé de mon SM-G800F en utilisant Tapatalk
$wap said:
You (both of you) are making a great job !
Envoyé de mon SM-G800F en utilisant Tapatalk
Click to expand...
Click to collapse
Ditto!
Sent from my SM-G800F using XDA Premium HD app
I don't see the point in cm13 when we didn't even get official Lollipop required to make cm12 better, "legit". Can someone enlighten me...?
Is it supposed to have the same bugs as cm12 or will there be more of them? Is Marshmallow statistically faster than Lollipop on other phones?
hennymcc said:
This is just a test build.
At the moment you have to flash the following boot.img with Odin after installing CM 13:
https://www.androidfilehost.com/?fid=24052804347848059
CM 13 may reboot after the initial configuration and may not be able to start again. I wiped the data partition and started again. This time it worked without a reboot (I also choose English as language and did not configure Wifi).
Click to expand...
Click to collapse
Updated the link with the boot.img build in
---------- Post added at 07:37 AM ---------- Previous post was at 07:33 AM ----------
n3n00 said:
I don't see the point in cm13 when we didn't even get official Lollipop required to make cm12 better, "legit". Can someone enlighten me...?
Is it supposed to have the same bugs as cm12 or will there be more of them? Is Marshmallow statistically faster than Lollipop on other phones?
Click to expand...
Click to collapse
CM13 is for people that enjoy its minor speed boost, smoother animations, cool new features and less Android related bugs over Lollipop. If you want a, well... almost bugless experience (Cough cough touchwiz) then use the stock rom.
CTXz said:
Updated the link with the boot.img build in
---------- Post added at 07:37 AM ---------- Previous post was at 07:33 AM ----------
CM13 is for people that enjoy its speed and less internal bugs. If you want a, well... almost bugless experience (Cough cough touchwiz) then use the stock rom.
Click to expand...
Click to collapse
Hi, so you think it will be easier to make a CM13 version with less bugs than the unfinished CM12 (Yes / No) ?
I enjoy to use a rom for every day not just having the last version to amaze my friends...
Depends. What I know for sure is that bugs related to Lollipop will be fixed. However we are hoping to get it as stable as cm12 if not more
Screehots
Screenshots with phone frame
Screenshots within Android
What‘s the current status of the mobile-data-connection in this build? Is it working?
In the first build of CM12.1 is was not working.
My experience was that this feature was always a problem in the beginning-time of every CM-build. Even with the official CM-builds.
WarStars said:
What‘s the current status of the mobile-data-connection in this build? Is it working?
In the first build of CM12.1 is was not working.
My experience was that this feature was always a problem in the beginning-time of every CM-build. Even with the official CM-builds.
Click to expand...
Click to collapse
We didn't build the correct RIL yet but it should be working in hopefully only few builds
New update
Download link has been updated
Changed from eng to userdebug
- No more red frames flashing
- Fixed Browser crashing
- Fixed crash after first boot
- More user friendly
- No additional boot.img flashing required
Also for anyone asking if there are really some differences in Marshmallow compared to Lollipop. Yes, the animations are allot smoother. There are some new native features. It has cleaned the mess of Lollipop's Android related bugs and is what Lollipop should have been from begin on. It is snappier than Lollipop and I can see/feel that. You may have realized that gingerbread-ish google toolbar. This is CM13 related since the official CyanogenMod 13 source is still in beta. However we no longer have the problem that the toolbar is laggy, instead it has a smooth animation when selecting it.
Could you please give some information when the RIL is done? Thank you in advance.
WarStars said:
Could you please give some information when the RIL is done? Thank you in advance.
Click to expand...
Click to collapse
It's on our priority list so hopefully soon
You know I have both the G800H and the G800F (the camera bug on the G800H prompted me to get the G800F), and now I don't know which one I should get rid of... I know, I know: "hard problem there KC... ya bloody wanker"
CTXz said:
It's on our priority list so hopefully soon
Click to expand...
Click to collapse
Awesome job so far, guys!
Sent from my SM-G800F using XDA Premium HD app
New update
Download link has been updated
Synced to the newest CM13 sources
- Ugly looking Google search box removed
CTXz said:
New update
Download link has been updated
Synced to the newest CM13 sources
- Ugly looking Google search box removed
Click to expand...
Click to collapse
Working features from page 1 still the same for this new build?
Sent from my SM-G800F using XDA Premium HD app
Mobile connections working now?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Broken Features / Known Issues
VIDEO ENCODER/DECODER ISSUES: This results in green lines on videos/pictures taken using the Intel HW encoder/decoder and other playback issues dependent on video formats. See the list below:
Snapchat: thin greeen line tends to appear on recorded videos for snapchat
Asus Pixelmaster Camera App: Super resolution mode does not work. Turning off "Optimizations" from settings clears up any green line issues.
Some video formats do not play as expected
FM Radio is unsupported.
audio is a little weird in Real Racing 3.
sim 2 cannot be disabled (this is true for all CM builds on non qualcomm hardware)
Other than Fugu (Nexus Player TV box) there are no Vendor released M x86/x86_64 builds in existance. You may experience some issues with GAPPS and some known apps not loading or working correctly. Below is a list of KNOWN apps that do not currently run on CM13 based x86 Zenfone 2 builds :
Ingress, Polaris Office, Chase Mobile, Showbox...
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
As the Zenfone2 has multiple models from multiple countries please include the following information in your report:
model #
CPU Speed / RAM Size
device state when errors occur (BT/wifi/nfc on ? On a call ? sitting idle on shelf ? )
method to reproduce if you've found something consistent
Download Links
CyanogenMod for Z00A/ ze551ml: ROM @ http://get.cm/?device=Z00A
CyanogenMod for Z008/ ze550ml: ROM @ http://get.cm/?device=Z008
Recovery Links
Z00A
Official TWRP: TWRP.ME
Z008
Official TWRP: TWRP.ME
Google apps addon:
Recommend GAPPS for now as the updated x86 gapps. Our resident x86 GAPPS guru @deadman96385 has been working with the opengapps crew to keep these current for us.
Flashable Modem updates:
Currently only supported in jrior001's unofficial TWRP
May or may not work in others
** see this post for more info **
Intel stores some modem firmware in the OTA's in a file labeled "ifwi.zip"
These are flashable zips to receive the updated firmware while staying on custom ROMS
**THIS IS A ONE WAY PROCEDURE, JUST LIKE THE OTA's THERE IS NO KNOWN WAY
TO FLASH BACK TO EARLIER MODEM FIRMWARE, PROCEED WITH CAUTION**
IF you still wish to proceed, current flashable ifwi zips are available HERE for Z00A AND Z008
FOR INFO ON MM BOOTLOADER BASED BUILDS SEE THIS POST
XDA:DevDB Information
CyanogenMod 13.0 Nightly Bulids (Z00A/Z008), ROM for the Asus ZenFone 2
Contributors
jrior001, crpalmer
Source Code: https://github.com/CyanogenMod/android_kernel_asus_moorefield
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 2.20.40.16x stock base
Version Information
Status: Nightly
Created 2015-12-05
Last Updated 2016-09-07
Reserved
FAQ
Does Official TWRP work?
* Yep
* Unified recovery builds as of TWRP 3.0.0-0, same build for both Z00A/Z008
Can I use a custom kernel with these builds?
* At your own risk, don't complain here if something gets broken in the process
*Also, doing so makes any feedback useless to us because the kernel and the ROM are a complete package and changing part of that means you may have broken something beyond our control.
Will this be an Official ROM?
* When all the show stopping bugs are fixed and all the upstream commits are merged, yes.
* Until then, no because CyanogenMod has very high standards for accepting new devices.
* As of 3/17/16 we now have official builds
Do I need to unlock the bootloader?
* Yes.
Upgrade from CM-12.1 ?
* Tools have been put in place to make upgrading from 12.1 nightlies smooth however backups are always recommended. Make a backup and attempt upgrade from 12.1 -> 13.0. Make sure to Flash 6.0 gapps at the same time. 6.0 only applies the proper permissions for system apps on first boot.
* If the above fails to load smoothly, restore your backup, take the necessary backups of apps and such and make a clean flash upgrade instead.
EXTERNAL SDCARD in M
* There were major changes in AOSP in the handling of storage.
* Two options :
(1) used as external storage. Removable, plug and play storage like we all know and love.
(2) used as Adoptable storage. non removable, Sdcard becomes an extenstion of your /data partition. Removing Sdcard will cause signifigant data loss.
* On first boot you are presented with the option to choose how to handle your sdcard. CHOOSE WISELY
* read more about this feature in this article from android central
Green lines on Pixelmaster camera/Snapchat
* In the Asus camera app disable "Optimizations", this should clear green lines/distorted pictures here.
* In Snapchat, issue is far less intrusive and there is no workaround.
FM Radio
* Currently this is unsuported. As of yet we have not managed to figure out how Asus made this feature work. Should we figure that out We'd love to support it but until then it is not a high priority issue to resolve. ** UPDATED** I found some source code for the FM radio implementation but it's clearly marked as proprietary and unuseble by us at this time.
Call Recording
Native Call Recording is a feature that while only legal in some countries, has become very popular on CM.
Currently we do not have full audio HAL source for Intel devices and have no way to implement this in CM for this device.
C-APPS
They're are currently no C-APPS packages for CM-13. Due to the way M handles system app permissions this is not likely to be available at any time in CM13.
I'd like to make a donation
Support of this project is a joint effort between @crpalmer and @jrior001. Many users like to show support via Donations. If you feel so inclined to support us in this manner you can do so HERE(jrior001) and HERE(crpalmer). Donations are by no means expected, but always appreciated.
Reserved
Wow.. AWESOMEE.. Thanks Guyzz
Full wipe required when coming from 12.1?
Awesome!!! But... Must.. Resist... The urge.... Aauuggggh.
Updates issues and notes on upgrading from cm-12.1 .
RIL connectivity is not very good right now, requires manual setup on most sims. Clean install w/gapps is preferred, but CM team goes to great lengths to make sure upgrade path is smooth so a flash-able update from 12.1 nightly "should " work fine. Just make sure to flash your gapps w/ROM prior to rebooting. Flashing gapps later is not something that is going to work well for you.
jrior001 said:
Updates issues and notes on upgrading from cm-12.1 .
RIL connectivity is not very good right now, requires manual setup on most sims. Clean install w/gapps is preferred, but CM team goes to great lengths to make sure upgrade path is smooth so a flash-able update from 12.1 nightly "should " work fine. Just make sure to flash your gapps w/ROM prior to rebooting. Flashing gapps later is not something that is going to work well for you.
Click to expand...
Click to collapse
We have resolved the DRM video issue and the audio lag in games has yet to be an issue in cm-13 thus far.
I should be studying for a test, but........CM13 is coming first now
Sent from my ASUS_Z008 using XDA Free mobile app
Fantastic! Just Z00A for now?
Just finished the SAT. Came home to a welcome surprise!
troy5890 said:
I should be studying for a test, but........CM13 is coming first now
Sent from my ASUS_Z008 using XDA Free mobile app
Click to expand...
Click to collapse
550 version doesn't seem to be up yet, unfortunately.
kanagawaben said:
Fantastic! Just Z00A for now?
Click to expand...
Click to collapse
I manually ran a z00a build to test the setup. Assuming all goes well, there will be a z008 build tomorrow.
kanagawaben said:
550 version doesn't seem to be up yet, unfortunately.
Click to expand...
Click to collapse
We weren't going to do the thread till tom but somebody found the test build.... It will come, but probably not till next nightly cycle
Sent from my N5206 using Tapatalk
crpalmer said:
I manually ran a z00a build to test the setup. Assuming all goes well, there will be a z008 build tomorrow.
Click to expand...
Click to collapse
Thank you! No rush at all, of course.
---------- Post added at 11:44 PM ---------- Previous post was at 11:42 PM ----------
jrior001 said:
We weren't going to do the thread till tom but somebody found the test build.... It will come, but probably not till next nightly cycle
Sent from my N5206 using Tapatalk
Click to expand...
Click to collapse
Ditto, my comment above. Absolutely delighted it is coming, and happy to wait a bit longer. Thanks for your sterling work guys!
jrior001 said:
Updates issues and notes on upgrading from cm-12.1 .
RIL connectivity is not very good right now, requires manual setup on most sims. Clean install w/gapps is preferred, but CM team goes to great lengths to make sure upgrade path is smooth so a flash-able update from 12.1 nightly "should " work fine. Just make sure to flash your gapps w/ROM prior to rebooting. Flashing gapps later is not something that is going to work well for you.
Click to expand...
Click to collapse
yeah, i got that sim problem, but choosing manually worked, flashing this rom with open gapps worked fine
Seutp wizard has closed. Keep getting g that message. Back to 12.1.
How install super SU?
Awesome
I formatted my sdcard1 over and over... but my zen can't access it.
Any reason why?
CyanogenMod 13 For F320
Please NEVER upload this rom to other forum or file share service.
Please contact me before modifying this rom.
Originally Posted by cyanogen
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Recommend Recovery : TWRP 2.8.7.X or above
Working on CM13
- Cellular(Call&Data)
- Wi-Fi
- GPS
- Sensors
- seLinux
- SD Card(w/ exFat FS)
- and all features except below
Not Working on CM13
- VoLTE
Known Bugs
- Not reported
Change Log
- Sep 4
* Merge latest kernel and device sources from cyanogenmod
- June 12
* Merge latest kernel and device source
* Fix battery icon width
- May 15
* Kernel Timer changed(100hz to 300hz). it increases performance without more power costs.
* TCP buffer define location changed(init -> overlay)
- Apr 10
* Fix Lockscreen's shortcut starts apps(camera, googlenow, etc...) while touch other area.
- Apr 3
* increase speak volume from F320K Stock Lollipop's mixser_path.xml
* merge d802 kernel, g2-common source.
- 14 feb
* fix media playback error when seek.
* change default governor to ondemand and customize for msm8974 ap.
* change iosched on init.g2.rc ( bfq -> fiops: for more battery)
* fix invalid number.
- 27 Jan
* sync latest cyanogenmod repos. system is more stable.
- 10 Jan
* Update init.g2.rc
> android 6.0 has changed storage mount like externalSD or USB OTG.
I change storage mount(fstab and etc...). Now can Boot!
* Change Default Governor: SmartassH3
* Change Default IO Sched: fiops
* update power_profile for f320*
- 8 Jan
* rebase all source
- 25 Dec
* Add IOSCHED, CPU GOV, ExtSD, EXFAT
Installing Guide
Precondition :
KK Bootloader and LP BootStack are required in order to install this ROM.
You may also need new Modem for working radio
1. Flashing LP BootStack (If upgrade old version, this is not needed)
1-1. Wipe factory reset, Wipe /system (IMPORTANT, Never Dirty Flash from CM-12.1 or others.)
2. Flashing Modem(If you first install)
3. Flashing CM13
4. Flash Gapps
5. Reboot
Source Code
Github : https://github.com/whdgmawkd
android_device_lge_f320, android_device_lge_g2kr-common,android_kernel_lge_msm8974_kr
Special Thanks to
CyanogenMod (Rom Source)
TheMuppets (CM vendor)
lg-devs (LP BootStack)
mpeople (KitKat Bootload for each F320S/K/L)
Download Link
I'm not fluent in English. Sorry for my poor English.
Modem : https://www.androidfilehost.com/?w=files&flid=46208
It was included KitKat Bootloader and LP Modem and etc.
Stable ROM : https://www.androidfilehost.com/?w=files&flid=46198
Download "cm-13.0-20160903-UNOFFICIAL-f320.zip"
Customized ROM by @pipyakas : https://www.androidfilehost.com/?fid=24591023225176446
* Changelog
- Compiled with UBERTC 5.3 for the rom and Architoolchain 4.9 for the kernel
- -O3 optimization flag, I'm working on further optimizations like graphite or full archidroid optimizations
- 3.4.112 linux kernel, I added 2.65ghz CPU OC and 650mhz OC, for the kernel I'm trying to implement zram and fastcharge, also I'm looking to modify ondemand governor for better balanced between performance and battery
This is my experimental build with some changes I like, everyone feel free to test it and give me feedbacks, also any advice would be awesome as I only have a month of experience in android building
Gapps : Use anything support 6.0.X. Recommend OpenGapps.
Merry Christmas.
Thank you for your work.
I shall test it. if it has the same bug i have with another marshmallow rom, i will re use the report i did on the prev rom. wish me luck
It won't boot on my F320L. It gets stuck at LG logo. My steps: Wipe data, cache, system, dalvik. Install F320L_KK_bootloader_plus_LP_bootstack.zip. Reboot to recovery. Install ROM. Is it supposed to boot on F320L?
wont boot on f320k. tried from Vanir 6.0.1 (f320 also) and didn't work. there is no reason for me to flash a bootloader/stack because I am on marshmallow. Please help
Added to index
[INDEX][LG G2] ROMs, Kernels, Guides and more
adriannxda said:
It won't boot on my F320L. It gets stuck at LG logo. My steps: Wipe data, cache, system, dalvik. Install F320L_KK_bootloader_plus_LP_bootstack.zip. Reboot to recovery. Install ROM. Is it supposed to boot on F320L?
Click to expand...
Click to collapse
For F320S/K
somboons said:
For F320S/K
Click to expand...
Click to collapse
Previous versions cm12.1 booted and worked fine. It should work on F320L outside Korea.
did anyone manage to boot on this rom? mine won't go past the LG logo
f320s .The same as yous.can't boot with LG LOGO .
liusi522 said:
f320s .The same as yous.can't boot with LG LOGO .
Click to expand...
Click to collapse
I'm Hoping @parkjh0821 Senpai can fix this
planning on fixing the fact it won't go past the LG logo ? don't worry, take your time its usually like this on all first builds XD
I'm sorry for late.
I found It cant boot because rom has critical problem. but I dont know why it cant boot.
boot image is OK. maybe overlay(ExtSD Patch) make this problem.
but I dont have enough time to build new cm13.
it will take long time to release new build.
parkjh0821 said:
I'm sorry for late.
I found It cant boot because rom has critical problem. but I dont know why it cant boot.
boot image is OK. maybe overlay(ExtSD Patch) make this problem.
but I dont have enough time to build new cm13.
it will take long time to release new build.
Click to expand...
Click to collapse
It's not your fault. It's just your job no return.Just Do your own thing.
When you have a new building in your free time, I'll test.Thanks
its ok. take ur time. aslong as in the end, we will have a booting cm13
new version released.
but still cant booting.
need more tester and feedback.
my device cant boot this rom with KK bootloader.
stuck at bootanimation and /data partition has no files, only folders
parkjh0821 said:
new version released.
but still cant booting.
need more tester and feedback.
my device cant boot this rom with KK bootloader.
stuck at bootanimation and /data partition has no files, only folders
Click to expand...
Click to collapse
Continue trying, good luck!
parkjh0821 said:
new version released.
but still cant booting.
need more tester and feedback.
my device cant boot this rom with KK bootloader.
stuck at bootanimation and /data partition has no files, only folders
Click to expand...
Click to collapse
Thank you for your work.I will test tomorrow .
tested
wont go through the cyanogen mod boot animation
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 9.x (Pie),which is designed to increase performance and reliability over stock Android for your device.All the source code for LineageOS is available in the LineageOS GitHub repo.And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.Official LineageOS website : http://lineageos.org
Downloads Links
LineageOS 16.0 (Unlocked Bootloader) :Test builds :
lineage-16.0-20191019-UNOFFICIAL-odin.zip | by CyberWalkMaN for Xperia ZL
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Google Applications (optional) :OpenGapps : http://opengapps.org/ (Use packages for ARM, Android 9.0, Nano or Pico)Information : Flash the GApps before the first boot. If not, a clean flash is recommended.Flashing and updatingLineageOS clean install :- (Optional) Flash the boot.img kernel from the ROM zip with Fastboot or Flashtool- (Optional) Wipe the data & cache (Backup to make sure not to loose data)- Flash the LineageOS ROM zip from the Recovery- (Optional) Flash the GApps to have the Google Applications- (Optional) Every additional zip you want to flash- RebootLineageOS update / upgrade :- (Information) Don't wipe anything unless you want to- (CM / UNOFFICIAL) Nothing to wipe when switching- (FUTURE RELEASES) Might need clean, informations will be updated- Flash the latest LineageOS ROM zip from the Recovery- (Optional) Flash the GApps on first install / upgrade. Not required later, but do update sometimes- (Optional) Every additional zip you want to flash- RebootLineageOS addonsu for root access :- (Information) Read the Root section of the Q&A thread- (Download) Download the addonsu for arm : LineageOS Downloads / Extras- (Optional) Flash the zip on a working Lineage installation (once)- (Information) Upon ROM updates, the addonsu is preserved- Reboot
Issues and reports- Report issues only if you are using the ROM kernel- If an additional mod is installed, make sure it's unrelated, and mention it- Make sure the issue wasn't discussed earlier in the threads- Share a log of the error with CatLog for example
About LineageOS Legal : http://lineageos.org/legal/The LineageOS team would like to thank everyone involvedin helping with testing, coding, debugging & documenting! Enjoy!
Also thanks to :- The LineageOS Team- The CyanogenMod Team- Everyone involved in working and testing
XDA:DevDB Information
[ROM][FINAL][9.0] LineageOS 16.0 for Xperia ZL, ROM for the Sony Xperia ZL
Contributors
CyberWalkMaN, AdrianDC
Source Code: https://github.com/fusion3-common
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2019-04-22
Last Updated 2019-10-20
FEATURES AND ISSUES
Code:
- Boot : Ok
- GApps : OpenGApps Nano Ok
- FOTA Recovery : Ok (see below)
- WiFi : Ok (real SONY MAC address)
- Bluetooth : Ok (real SONY MAC address)
- WiFi Hotspot : Ok (2.4GHz only)
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Ok
- MicroSD : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- AOSP sensors : Ok
- FM Radio : Ok
- Vibrator : Ok
- Microphone : Ok
- Audio & external audio : Ok
- Bluetooth audio : Ok
- NFC : Ok
- Kernel : Ok
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Ok
- SEPolicies : Work In Progress
At the moment, FM radio, manual network selection and auto brightness does not work (maybe something else). New builds will be uploaded as source updates / bug fixes are updated.
camera ok?
using as a daily cell phone, this is fast, congratulations.
Switch from nkomarn Lineage 16.O build. Camera works okay, so it was great. Only problem is flashing twrp, cannot successful flash using the app. Always go back to lineage recovery even light indicator goes purple to orange. Any workaround?
Also power off function not work, it rebooted. Anyways, it was great and thank you for continue work on this. Cheers! ?
Sent from my Sony Xperia ZL using XDA Labs
Just started testing this Rom, my feedback for now is:
Autorotate is not working.
Can't change any sound (calls, SMS, etc)- (APP crashes).
I've experienced some random reboots in the first few hours after flashing, it seems stable now.
Advanced reboot is not working properly.
Magisk is working fine.
Nova Launcher is working fine.
I'll continue to test...
Hope my feedback can help make this better.
hi, many thanks to develper! smooth running even such older device! the only issue is battery indicator always start from 12% but I am not sure if it is common issue.
Flash the latest build 0803, Sensors are now working. Auto Rotate is working, since sensor driver is there. FM Working properly also.
Still have issue on Turn Off, it keep restarting.
Cannot able to flash Twrp Recovery, still booting to lineage recovery.
But still, thank you for your time on updating this Rom
Sent from my Sony Xperia ZL using XDA Labs
Fiz uma instalação limpa do zero. Há 2 dias estou usando e sem bugs, ou reinicialização inesperada. Ótimo trabalho e muito obrigado por isso =D
New build uploaded (lineage-16.0-20190824-UNOFFICIAL-odin.zip), major changes since May:
All sensors works now (Thanks to @Chippa_a)
Manual network selection fixed
Telegram calls fixed (Need to confirm)
FM Radio fixed
Small gps improvement
Performance improvement
Updated kernel (fixed bug with rebooting instead of shutting down and some other bugs), also we now use binder and lmk from AOSP 3.18 kernel
SELinux denials resolved at 90%
Magisk issue fixed
Android 9.0.0_r46 (August security patches)
Addonsu is already included, you can enable root access in the developer settings
CyberWalkMaN said:
New build uploaded (lineage-16.0-20190824-UNOFFICIAL-odin.zip), major changes since May:
All sensors works now (Thanks to @Chippa_a)
Manual network selection fixed
Telegram calls fixed (Need to confirm)
FM Radio fixed
Small gps improvement
Performance improvement
Updated kernel (fixed bug with rebooting instead of shutting down and some other bugs), also we now use binder and lmk from AOSP 3.18 kernel
SELinux denials resolved at 90%
Magisk issue fixed
Android 9.0.0_r46 (August security patches)
Addonsu is already included, you can enable root access in the developer settings
Click to expand...
Click to collapse
Thank you for the update! I dirty-flashed it over the 0803 build. You see, I run the stable Magisk v19.3, which, along with some modules, then allowed me to pass both Safetynet tests. Not anymore. As you stated that Selinux was almost ready, I had uninstalled ibuprophen's The SELinux Switch app prior to flashing the new build. I was using it in order to set Selinux to enforcing. As Selinux is still off in the new build, I tried to install the app back, but the new build doesn't allow me to do it. Even the zip, although correctly installed in recovery, after booted up, no SELinux Swich app is in the drawer, because directory /data/app/com.ibuprophen.selinux-1 has been deleted during the boot up process! What's happening?
EDIT: I decided to do a clean install. Everything is back to normal! Thanks, anyway!
Pixel Launcher
Thanks again for your hard work in bringing Android 9 to this very old, but still powerful, device of ours.
Well, I prefer Pixel Launcher over the embedded home app, but it keeps crashing all the time upon being selected as the default home app. For those who also plan to use Pixel Launcher, edit /data/system/packages.xml, and add up the following entries, under <package name="com.google.android.apps.nexuslauncher"> and <perms>:
Code:
<item name="android.permission.STATUS_BAR" granted="true" flags="0" />
<item name="android.permission.MANAGE_ACTIVITY_STACKS" granted="true" flags="0" />
Could you make such changes in your next build?
After flashing the 0824 build, i experienced much better scrolling experience, performance improved a lot.
Also Twrp works now and turn off function work properly, no need to reboot and press volume down go to stock recovery just to turn this off. So thank you for continue working on this
Sent from my Sony Xperia ZL using XDA Labs
I thank you for continuing to develop! I'll install that, i report issues!
Perfect, bug-free, fast and stable ROM, using with magisk, everything runs perfectly.
New build uploaded (lineage-16.0-20191019-UNOFFICIAL-odin.zip), major changes since August:
Fast battery drain fixed (for 15.1 nightlies too)
SELinux denials resolved at 99% (You can make builds in enforced SELinux, but I would recommend continuing to build them in permissive). Current build in permissive SELinux.
Oktober security patches
Minor performance and stability improvements (for 15.1 nightlies too)
Added missing props for gps and Miracast.
Build status - Stable.
Addonsu is already included, you can enable root access in the developer settings
This is where my support for android 8-9 for Z/ZL/ZR/Tablet Z ends, this build will be the last. All the changes made in the sources are already available on github.com/LineageOS, if someone wants to continue supporting and get the official LineageOS 16.0 - write to PM, I will explain in detail what remains to be done in the sources. Also, if someone wants to try to build other roms for our devices based on android 8-9 from the available sources - try to choose CAF-based roms (for example, AOKP, LineageOS, Ressurection Remix, AICP, etc.), then with 95% chance you will build and run the rom. Our sources are based on CAF, and for the build of roms based on AOSP, additional fixes are required, plus there will be problems with sound anyway.
I also want to note that I made a most part of the changes made in 16.0 to the official 15.1 nightlies, which should significantly improve their stability and performance
CyberWalkMaN said:
New build uploaded (lineage-16.0-20191019-UNOFFICIAL-odin.zip), major changes since August:
Fast battery drain fixed (for 15.1 nightlies too)
SELinux denials resolved at 99% (You can make builds in enforced SELinux, but I would recommend continuing to build them in permissive). Current build in permissive SELinux.
Oktober security patches
Minor performance and stability improvements (for 15.1 nightlies too)
Added missing props for gps and Miracast.
Build status - Stable.
Addonsu is already included, you can enable root access in the developer settings
This is where my support for android 8-9 for Z/ZL/ZR/Tablet Z ends, this build will be the last. All the changes made in the sources are already available on github.com/LineageOS, if someone wants to continue supporting and get the official LineageOS 16.0 - write to PM, I will explain in detail what remains to be done in the sources. Also, if someone wants to try to build other roms for our devices based on android 8-9 from the available sources - try to choose CAF-based roms (for example, AOKP, LineageOS, Ressurection Remix, AICP, etc.), then with 95% chance you will build and run the rom. Our sources are based on CAF, and for the build of roms based on AOSP, additional fixes are required, plus there will be problems with sound anyway.
I also want to note that I made a most part of the changes made in 16.0 to the official 15.1 nightlies, which should significantly improve their stability and performance
Click to expand...
Click to collapse
Thanks for your hardwork and making a stable build, but i encounter issue Installing it.
Clean Flash it including system, but result in Rebooting to twrp, tried to flash previous Build then Update, stuck to Boot Animation and Reboot to Twrp. I'm quite sure the file is not corrupted, downloaded it two times. Sadly it was the Final build but hoping you will address and fix it. Thanks
[Updated]
Hello!!
Kran007 said:
Thanks for your hardwork and making a stable build, but i encounter issue Installing it.
Clean Flash it including system, but result in Rebooting to twrp, tried to flash previous Build then Update, stuck to Boot Animation and Reboot to Twrp. I'm quite sure the file is not corrupted, downloaded it two times. Sadly it was the Final build but hoping you will address and fix it. Thanks
[Updated]
Click to expand...
Click to collapse
Could you try the rom? or you can't intall it anyway? I gonna try it in the xperia zl that i will give to my father, but i can't get some error, He gona kill me! Actually , his ZL is running august version.
Can someone make a Build with December Security Patch?