StryFlex v 1.0 Rom stuck on 'patching system image unconditionally " - Sony Xperia M

Please help me
Problem on Installing rom....with cwm recovery stuck on patching system image unconditionally
I wait till 15 minutes afyer that i hv to restore my backup...
Please help.....

akki2108 said:
Please help me
Problem on Installing rom....with cwm recovery stuck on patching system image unconditionally
I wait till 15 minutes afyer that i hv to restore my backup...
Please help.....
Click to expand...
Click to collapse
Faced the same problem , than i downloaded the ROM again from an alternate server and it worked ... So i think you should do it too because the zip that you are using now is probably corrupted :good:

Shazam_strikes said:
Faced the same problem , than i downloaded the ROM again from an alternate server and it worked ... So i think you should do it too because the zip that you are using now is probably corrupted :good:
Click to expand...
Click to collapse
i download from other server but it not works,,,,when i am extracting it then shows error in extracting system.dat...................:crying::crying::crying:

akki2108 said:
i download from other server but it not works,,,,when i am extracting it then shows error in extracting system.dat...................:crying::crying::crying:
Click to expand...
Click to collapse
Yeh it done but problem with network data....
Dual sim experience is not good.....

Related

[Q] Stuck on Boot Animation :(

I am using Spice Dream Uno. I decided to install cm11 sprout ROM but it says that it is a bad zip. Then i tried this
http://forum.xda-developers.com/dream-uno/development/stock-rom-spice-dream-uno-mi498-t2915844 (Stock Rom for Android one)
still stuck on boot animation of Micromax
How to make my phone completely working.
PLEASE HELP
Rishabh-The Developer said:
I am using Spice Dream Uno. I decided to install cm11 sprout ROM but it says that it is a bad zip. Then i tried this
http://forum.xda-developers.com/dream-uno/development/stock-rom-spice-dream-uno-mi498-t2915844 (Stock Rom for Android one)
still stuck on boot animation of Micromax
How to make my phone completely working.
PLEASE HELP
Click to expand...
Click to collapse
solution for bad zip :
fine.. u must hav unlocked bootloader, rooted and custom recovery like cwm 6.0.4.x..
if its ok then verify your downloaded zip
..
this can be done by double clicking it on windows or in your mobile use file explorer..
if the zip contains meta-inf folder, system, boot. img.. then your download was good.. otherwise re download it..
solution for boot stuck :
did u replace oem and boot logo of mmx with spice?
try it and report..
or just flash the oem nd boot logo alone
Faiyaz5yaz said:
fine.. u must hav unlocked bootloader, rooted and custom recovery like cwm 6.0.4.x..
if its ok then verify your downloaded zip
..
this can be done by double clicking it on windows or in your mobile use file explorer..
if the zip contains meta-inf folder, system, boot. img.. then your download was good.. otherwise the re download it..
if again everything was perfect as mentioned above.. report it again here
Click to expand...
Click to collapse
my oem is unlocked, rooted mobile and have cwm 6.0.4
how to make my phone completely working ??
how to intall a stock rom or any other rom on my phone through cwm??
cwm shows error everytime when i install cm11 zip
Rishabh-The Developer said:
my oem is unlocked, rooted mobile and have cwm 6.0.4
how to make my phone completely working ??
how to intall a stock rom or any other rom on my phone through cwm??
cwm shows error everytime when i install cm11 zip
Click to expand...
Click to collapse
i hav edited my previous post.. check it again
Faiyaz5yaz said:
i hav edited my previous post.. check it again
Click to expand...
Click to collapse
ok wait let me flash these two.
Still Stucked
Faiyaz5yaz said:
solution for bad zip :
fine.. u must hav unlocked bootloader, rooted and custom recovery like cwm 6.0.4.x..
if its ok then verify your downloaded zip
..
this can be done by double clicking it on windows or in your mobile use file explorer..
if the zip contains meta-inf folder, system, boot. img.. then your download was good.. otherwise re download it..
solution for boot stuck :
did u replace oem and boot logo of mmx with spice?
try it and report..
or just flash the oem nd boot logo alone
Click to expand...
Click to collapse
I Replaced boot logo and Oem but still I Stuck on Boot Animation of Spice.
I Really don't know much about this phone. Please tell me a Working Method to solve my issue.
I want my Phone Working only. No Matter how but need it badly.
Rishabh-The Developer said:
I Replaced boot logo and Oem but still I Stuck on Boot Animation of Spice.
I Really don't know much about this phone. Please tell me a Working Method to solve my issue.
I want my Phone Working only. No Matter how but need it badly.
Click to expand...
Click to collapse
check if recovery is working or flash a custom recovery via fastboot and do three wipes..
and did u just flashed the oem nd logo or the complete rom? if not, try flashing the complete ROM with replaced files
Faiyaz5yaz said:
check if recovery is working or flash a custom recovery via fastboot and do three wipes..
and did u just flashed the oem nd logo or the complete rom? if not, try flashing the complete ROM with replaced files
Click to expand...
Click to collapse
I am using cwm 6.0.5.1
This is all happening.
see screenshots
i replaced boot logo and oem in a complete stock rom and then flashed.
what to do now ??
Rishabh-The Developer said:
I am using cwm 6.0.5.1
This is all happening.
see screenshots
i replaced boot logo and oem in a complete stock rom and then flashed.
what to do now ??
Click to expand...
Click to collapse
after flashing rom ur oem gets locked.. if u have already unlocked, now root the mob again...
if that isn't the prob, as i already said, verify your file in memory card if it s properly downloaded nd copied
Faiyaz5yaz said:
after flashing rom ur oem gets locked.. if u have already unlocked, now root the mob again...
if that isn't the prob, as i already said, verify your file in memory card if it s properly downloaded nd copied
Click to expand...
Click to collapse
its properly downloaded and copied but it is not flashable.
you simply tell me that which stock rom can i use to make my phone working.
link please?
Rishabh-The Developer said:
its properly downloaded and copied but it is not flashable.
you simply tell me that which stock rom can i use to make my phone working.
link please?
Click to expand...
Click to collapse
well the cwm currently does not support flashing zip from sd card.. try adb side load if u hav unlocked bootloader and rooted..
if u don't want to do adb sideload, try flashing philz cwm.. its working perfectly..
Faiyaz5yaz said:
well the cwm currently does not support flashing zip from sd card.. try adb side load if u hav unlocked bootloader and rooted..
if u don't want to do adb sideload, try flashing philz cwm.. its working perfectly..
Click to expand...
Click to collapse
ok wo bhi krke dekhta hu....
Faiyaz5yaz said:
well the cwm currently does not support flashing zip from sd card.. try adb side load if u hav unlocked bootloader and rooted..
if u don't want to do adb sideload, try flashing philz cwm.. its working perfectly..
Click to expand...
Click to collapse
bro.
here is my whatsapp number - 8010159864
text me on it and then i send you some screenshots of my issue.
waiting for your message.
Rishabh-The Developer said:
ok wo bhi krke dekhta hu....
Click to expand...
Click to collapse
philz
http://forum.xda-developers.com/cro...e-general/sprout-philz-touch-v6-57-9-t2887574
Faiyaz5yaz said:
philz
http://forum.xda-developers.com/cro...e-general/sprout-philz-touch-v6-57-9-t2887574
Click to expand...
Click to collapse
already downloaded this file bro.
my micromax canvas a1 stuck on boot
Rishabh-The Developer said:
already downloaded this file bro.
Click to expand...
Click to collapse
Hi rishabh
Have u find the solution for your phone
Even I had faced the same issue
I had installed cwm recovery on my canvas a1
And tried to reboot. My. Phone got stucked on boot
Animation I can boot into cwm recovery mode,fasboot mode but unable to start
Device
Can u please help me
I even tried by erasing cache data and dalvik cache also
But of no use
Regards
Harish k
use sp flash tool
use sp flash tool for flashing stock rom

HELP...!!!

I got the 5.40 mb update ....but after installing that my phone hangs on boot logo.......guyzz help me plz... :crying:
Hell Drew said:
I got the 5.40 mb update ....but after installing that my phone hangs on boot logo.......guyzz help me plz... :crying:
Click to expand...
Click to collapse
Same happened with me, my phone got a boot loop. If u have custom recovery installed, then restore to previous rom(hope u made a backup). If not, then I think you will have to flash the stock rom.
Thank you...!
K.khiladi said:
Same happened with me, my phone got a boot loop. If u have custom recovery installed, then restore to previous rom(hope u made a backup). If not, then I think you will have to flash the stock rom.
Click to expand...
Click to collapse
Tnxxx bro.....yes i flashed it again and installed the update after smtime of downloading it and now it installed ...successfully...tnx for yr help...K.khiladi

Your recovery is using new storage layout and rom is not

I'm getting an error message when trying to install custom rom resurrection remix. The error is 'Your recovery is using new storage layout and rom is not'
How can install the rom then?
b2nengs said:
I'm getting an error message when trying to install custom rom resurrection remix. The error is 'Your recovery is using new storage layout and rom is not'
How can install the rom then?
Click to expand...
Click to collapse
download this one and flash it
https://www.androidfilehost.com/?fid=24052804347780159
onex master said:
download this one and flash it
]
Click to expand...
Click to collapse
It removed the error but now seems like it got stuck on 'Patching system image unconditionally'. How long should it take cause it has been hours now
b2nengs said:
It removed the error but now seems like it got stuck on 'Patching system image unconditionally'. How long should it take cause it has been hours now
Click to expand...
Click to collapse
That's weird...
Which recovery did u flash
Flash the latest one ..I thinks its 2.8.5.3
Have u made a clean flash I.e clear the cache and did a factory reset ?? Before flashing Are u using multirom??
onex master said:
download this one and flash it
Click to expand...
Click to collapse
onex master said:
That's weird...
Which recovery did u flash
Flash the latest one ..I thinks its 2.8.5.3
Have u made a clean flash I.e clear the cache and did a factory reset ?? Before flashing Are u using multirom??
Click to expand...
Click to collapse
I'm using twr2.8.5.3 big, if I try to wipe it gives an error message saying could not mount to find crypto footer and followed by other technical message
b2nengs said:
I'm using twr2.8.5.3 big, if I try to wipe it gives an error message saying could not mount to find crypto footer and followed by other technical message
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2683787
Read this thread ...you will find your way out of it
onex master said:
[]
Read this thread ...you will find your way out of it
Click to expand...
Click to collapse
Thanks a lot that worked out managed to wipe everything but still stuck at patching system image unconditionally
Have tried to flash using a pc tool but still it gives an error message saying can't find android-info text something
onex master said:
Read this thread ...you will find your way out of it
Click to expand...
Click to collapse
Thanks a lot that worked out managed to wipe everything, still stuck on the patching system image unconditionally error
b2nengs said:
Thanks a lot that worked out managed to wipe everything, still stuck on the patching system image unconditionally error
Click to expand...
Click to collapse
try downloading the rom zip file again or try some other rom

[Q&A] [ROM] 6.0 nAOSP error flashing

Hey, I apologize in advance for my bad english.
So I do everything from this thread http://forum.xda-developers.com/showpost.php?p=65233973&postcount=3797 , including repartitionning, but when I try to flash .zip with nAOSP i got message like this:
Patching system image uncondittionally...
Verifying the updated system image...
system partition has unexpected contents after OTA update
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/nAOSProm-6.0-b08.zip'
Updating partition details...
... done
Click to expand...
Click to collapse
Maybe it's easy sollution for this and I am to dumb to see it, but I stuck in this point and if somebody know the sollution I will be grateful to share it. Thanks
Hellong said:
Hey, I apologize in advance for my bad english.
So I do everything from this thread http://forum.xda-developers.com/showpost.php?p=65233973&postcount=3797 , including repartitionning, but when I try to flash .zip with nAOSP i got message like this:
Maybe it's easy sollution for this and I am to dumb to see it, but I stuck in this point and if somebody know the sollution I will be grateful to share it. Thanks
Click to expand...
Click to collapse
Your recovery seems to be old. Use the recovery included in ROM zip.

(Z00L). dualboot patcher support

Link to app. - https://dbp.noobdev.io/downloads/
https://dbp.noobdev.io/files/9.2.0....atcherAndroid-9.2.0.r25.g0638efb-snapshot.apk
Official website. dpb.noobdev.io
Offcial thread -
https://forum.xda-developers.com/showthread.php?t=2447534
All the steps on how to use are on the official thread
All the credits goes to official developer chenxiaolong
Thanks to rom developers also
Status- stable
Its working and tested by me
U may encounter tz verification failed
For this use twrp to flash patched zip or u can edit updater script in patched zip file amd remove lines for verification of tz version (solved)
Will solve this asap
"asus.verify_trustzone() failed to read current TZ version: 2"
Getting above error on flashing.
I patched for installing in ext_sdcard.
aadi50 said:
"asus.verify_trustzone() failed to read current TZ version: 2"
Getting above error on flashing.
I patched for installing in ext_sdcard.
Click to expand...
Click to collapse
yes
I will solve this asap
aadi50 said:
"asus.verify_trustzone() failed to read current TZ version: 2"
Getting above error on flashing.
I patched for installing in ext_sdcard.
Click to expand...
Click to collapse
u can use twrp to flash the patched zip
Or just edit the updater script and remove lines verifying the tz
addy692 said:
u can use twrp to flash the patched zip
Or just edit the updater script and remove lines verifying the tz
Click to expand...
Click to collapse
So I removed line verifying tz and then patched zip and flashed from in-app and it flashed and then booted successfully.
aadi50 said:
So I removed line verifying tz and then patched zip and flashed from in-app and it flashed and then booted successfully.
Click to expand...
Click to collapse
I had solved that tz fail
It will be fixed in the new update of tha app hopefully
addy692 said:
I had solved that tz fail
It will be fixed in the new update of tha app hopefully
Click to expand...
Click to collapse
Ok. Good work. I will try.
Can you confirm if app sharing works or not?? I tried but it never worked.
Error
It's showing device's codename asus_zool_93 is not recognized...error
Kevin0916 said:
It's showing device's codename asus_zool_93 is not recognized...error
Click to expand...
Click to collapse
Ok i will add this on next update
And please let me more codenames used for this device
I wil add that
Kevin0916 said:
It's showing device's codename asus_zool_93 is not recognized...error
Click to expand...
Click to collapse
If u want to work thid now
Then change ur codename in buuld.prop
To Z00L
addy692 said:
If u want to work thid now
Then change ur codename in buuld.prop
To Z00L
Click to expand...
Click to collapse
ohhk...thanks
addy692 said:
If u want to work thid now
Then change ur codename in buuld.prop
To Z00L
Click to expand...
Click to collapse
I think i will wait for the update...becoz the ro.build.product is showing Z00L....
Kevin0916 said:
I think i will wait for the update...becoz the ro.build.product is showing Z00L....
Click to expand...
Click to collapse
Just change the value which is
Asus_Z00L_93 to ZOOL
Kevin0916 said:
I think i will wait for the update...becoz the ro.build.product is showing Z00L....
Click to expand...
Click to collapse
new update released
Try that may be tz failed is now solved
addy692 said:
new update released
Try that may be tz failed is now solved
Click to expand...
Click to collapse
Great.. Keep it up... It is solved. Out of excitement i tried to flash many roms, i flashed XOSP, RR, AICP, OCT_OS successfully. Getting error in bliss. See attached screenshot.
And one more thing to confirm?? I am unable to flash any patched rom through twrp recovery (using v3.1.0.0). Is it only me or is it a common error.
Im TWRP, error is something like "updater process ends with error 1".
aadi50 said:
Great.. Keep it up... It is solved. Out of excitement i tried to flash many roms, i flashed XOSP, RR, AICP, OCT_OS successfully. Getting error in bliss. See attached screenshot.
And one more thing to confirm?? I am unable to flash any patched rom through twrp recovery (using v3.1.0.0). Is it only me or is it a common error.
Im TWRP, error is something like "updater process ends with error 1".
Click to expand...
Click to collapse
thanks for testing app and reporting
I will solve both things asap
i recommend to use data slot
As using extsd slot will be slower due sd card write speed
addy692 said:
new update released
Try that may be tz failed is now solved
Click to expand...
Click to collapse
It's Working now...thanks mate
aadi50 said:
Ok. Good work. I will try.
Can you confirm if app sharing works or not?? I tried but it never worked.
Click to expand...
Click to collapse
no app sharing support was dropped
aadi50 said:
Great.. Keep it up... It is solved. Out of excitement i tried to flash many roms, i flashed XOSP, RR, AICP, OCT_OS successfully. Getting error in bliss. See attached screenshot.
And one more thing to confirm?? I am unable to flash any patched rom through twrp recovery (using v3.1.0.0). Is it only me or is it a common error.
Im TWRP, error is something like "updater process ends with error 1".
Click to expand...
Click to collapse
have u tried extsd card slot
And how much it takes to boot extsd card slot rom?
In my case its not booting up
addy692 said:
have u tried extsd card slot
And how much it takes to boot extsd card slot rom?
In my case its not booting up
Click to expand...
Click to collapse
Actually, i have tried ext-sd slot only. And it works fine.
I use more than 200+ user apps in primary rom, So I cant waste my internal storage on ROMs. So I Use Ext-slot only.
And I use Samsung 64GB Class 10 (80Mbps) and It works fine.
Flashing a Rom takes 7-10min (without gapps).
And even the booting time is rarely different. First boot may take more than 5-10min. But after that its always around 2-3min.
Sense OS took much time as its larger in size. Rest are almost as i described above.
Which ROM did u tried?? I would say try RR its the fastest in booting and flashing.

Categories

Resources