Related
I have jellybean 4.1.2 stock and rooted. I also have twrp 2.5 installed.
I am trying to install this rom: Jedi Mind Trick JB3 !-- http://d-h.st/xPj
These are the steps I did:
1. Downloaded ROM and used USB Storage to transfer to phone
2. Made a backup using rom toolbox app
3. Wiped data (factory data reset) using TWRP
4. Clicked Install in TWRP and selected ROM. When I tried installing I got the error below:
Checking for MD5 file...
Skipping MD5 Check; no MD5 file found.
Verifying zip signature...
E:Zip signature verification failed: 1
Error flashing zip '/sdcard/Douwnload/JedimindTrick....
Updationg partition details:
FAILED.
============
Anyone know what i'm doing wrong? Please help me!
I just noticed after my phone rebooted I no longer have working phone service and none of my google apps are working. Please help me.
nursebro said:
I have jellybean 4.1.2 stock and rooted. I also have twrp 2.5 installed.
I am trying to install this rom: Jedi Mind Trick JB3 !-- http://d-h.st/xPj
These are the steps I did:
1. Downloaded ROM and used USB Storage to transfer to phone
2. Made a backup using rom toolbox app
3. Wiped data (factory data reset) using TWRP
4. Clicked Install in TWRP and selected ROM. When I tried installing I got the error below:
Checking for MD5 file...
Skipping MD5 Check; no MD5 file found.
Verifying zip signature...
E:Zip signature verification failed: 1
Error flashing zip '/sdcard/Douwnload/JedimindTrick....
Updationg partition details:
FAILED.
============
Anyone know what i'm doing wrong? Please help me!
Click to expand...
Click to collapse
U need to flash SGH-T989_DARKSIDE.SUPER.WIPE_EXT4.zip first then the rom :thumbup:
Sent from my SGH-T989 using Tapatalk 2
i tried flashing above file now my phone is stuck in the samsung gs2 splash screen. Does this mean im bricked?
im so sad. please help me someone.
nursebro said:
i tried flashing above file now my phone is stuck in the samsung gs2 splash screen. Does this mean im bricked?
im so sad. please help me someone.
Click to expand...
Click to collapse
Can you boot into twrp or download mode?
your phones not bricked unless its totally off and wont turn back off.
You just have a boot loop, its no big deal.
nursebro said:
i tried flashing above file now my phone is stuck in the samsung gs2 splash screen. Does this mean im bricked?
im so sad. please help me someone.
Click to expand...
Click to collapse
If you are running TWRP 2.5.0.0 like me
do this...
Boot into recovery...
go to Wipe
go to advanced wipe
select dalvik cache, data, system,cache and preload only
swipe to wipe
go to install
select JMT JB 3 rom
flash it
do not wipe anything else after
dont fix permissions
just reboot
it will work
be patient takes a few minutes to load
IVIorph said:
If you are running TWRP 2.5.0.0 like me
do this...
Boot into recovery...
go to Wipe
go to advanced wipe
select dalvik cache, data, system,cache and preload only
swipe to wipe
go to install
select JMT JB 3 rom
flash it
do not wipe anything else after
dont fix permissions
just reboot
it will work
be patient takes a few minutes to load
Click to expand...
Click to collapse
I dont think i can boot into recovery. my phone keeps getting stuck in galaxy s2 loading screen. is there another way to get into recovery to do the wipe?
I really hope my phone is not already bricked.
nursebro said:
I dont think i can boot into recovery. my phone keeps getting stuck in galaxy s2 loading screen. is there another way to get into recovery to do the wipe?
I really hope my phone is not already bricked.
Click to expand...
Click to collapse
make sure your phone is not connected to usb
you must hold down volume up at down and power until you feel a vibration
when you feel a vibration let go of the power button only
this will get you to recovery... then follow my steps
and let us know how it went... good luck m8
IVIorph said:
make sure your phone is not connected to usb
you must hold down volume up at down and power until you feel a vibration
when you feel a vibration let go of the power button only
this will get you to recovery... then follow my steps
Click to expand...
Click to collapse
ok i will try it. please stay incase i need help.
nursebro said:
ok i will try it. please stay incase i need help.
Click to expand...
Click to collapse
Oh one more thing...
you might want to try to redownload the rom
just in case its fragmented somehow
if you get into recovery you can copy over the rom again while in recovery
make sure you are usb unplugged
boot recovery
plug usb into computer
go to mount
only cache, internal sdcard and micro sdcard are selected on mine
then click on mount usb storage
copy over fresh copy of rom
then follow my flash instructions
IVIorph said:
Oh one more thing...
you might want to try to redownload the rom
just in case its fragmented somehow
if you get into recovery you can copy over the rom again while in recovery
make sure you are usb unplugged
boot recovery
plug usb into computer
go to mount
only cache, internal sdcard and micro sdcard are selected on mine
then click on mount usb storage
copy over fresh copy of rom
then follow my flash instructions
Click to expand...
Click to collapse
You are a genius. I followed the steps you mentioned and now have Jedimind ROM installed. Thank you so much for your help. I felt like i was going to have a heart attack because i thought my phone was bricked.
nursebro said:
You are a genius. I followed the steps you mentioned and now have Jedimind ROM installed. Thank you so much for your help. I felt like i was going to have a heart attack because i thought my phone was bricked.
Click to expand...
Click to collapse
cool glad I could help
just don't forget to hit the thanks button m8 cheers!
IVIorph said:
cool glad I could help
just don't forget to hit the thanks button m8 cheers!
Click to expand...
Click to collapse
I sure will!
:good::good::good::good::good::good::good::good::good:
esema1o said:
U need to flash SGH-T989_DARKSIDE.SUPER.WIPE_EXT4.zip first then the rom :thumbup:
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
To the OP, I'm glad you got it working. JMT JB3 is great. I'm on it too. I love it.
Just a side note on these scripts. Darkside does not work with anything based off of the official 4.1.2 release because of the Preload that is included. You need to use the new modified ones from here: http://forum.xda-developers.com/showthread.php?t=2235141
nursebro said:
I have jellybean 4.1.2 stock and rooted. I also have twrp 2.5 installed.
I am trying to install this rom: Jedi Mind Trick JB3 !-- http://d-h.st/xPj
These are the steps I did:
1. Downloaded ROM and used USB Storage to transfer to phone
2. Made a backup using rom toolbox app
3. Wiped data (factory data reset) using TWRP
4. Clicked Install in TWRP and selected ROM. When I tried installing I got the error below:
Checking for MD5 file...
Skipping MD5 Check; no MD5 file found.
Verifying zip signature...
E:Zip signature verification failed: 1
Error flashing zip '/sdcard/Douwnload/JedimindTrick....
Updationg partition details:
FAILED.
============
Anyone know what i'm doing wrong? Please help me!
Click to expand...
Click to collapse
So guys, what was supposed to be the correct procedure for this installation?
sojay said:
So guys, what was supposed to be the correct procedure for this installation?
Click to expand...
Click to collapse
The procedure for a rom installation is usually listed on its OP<-Opening Page
One more thing... you asked me in a text message about root...
TWRP 2.5.0.0 has the ability to root a device...
here is... IMO the easiest procedure to install stock 4.1.2, recovery and root
flash stock rom with odin (I rebooted to system looked at the sock rom quick and went back to odin(should still work without restart toggle on))
flash TWRP 2.5.0.0 (with reboot toggle on)
open TWRP go to reboot and reboot system (it will prompt you to install root)
when phone boots open SU update done!
nursebro said:
I have jellybean 4.1.2 stock and rooted. I also have twrp 2.5 installed.
I am trying to install this rom: Jedi Mind Trick JB3 !-- http://d-h.st/xPj
These are the steps I did:
1. Downloaded ROM and used USB Storage to transfer to phone
2. Made a backup using rom toolbox app
3. Wiped data (factory data reset) using TWRP
4. Clicked Install in TWRP and selected ROM. When I tried installing I got the error below:
Checking for MD5 file...
Skipping MD5 Check; no MD5 file found.
Verifying zip signature...
E:Zip signature verification failed: 1
Error flashing zip '/sdcard/Douwnload/JedimindTrick....
Updationg partition details:
FAILED.
============
Anyone know what i'm doing wrong? Please help me!
Click to expand...
Click to collapse
That looks like a bad download to me.
Sent from my SGH-T989 using xda app-developers app
---------- Post added at 03:35 PM ---------- Previous post was at 02:58 PM ----------
PJcastaldo said:
That looks like a bad download to me.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Redownload the ROM. Also turn off sig verification in twrp.
Flashing a ROM isn't as hard as some people make it. All these crazy steps.. And waiting and blah blah.. Useless.
Sent from my SGH-T989 using xda app-developers app
nursebro said:
i tried flashing above file now my phone is stuck in the samsung gs2 splash screen. Does this mean im bricked?
im so sad. please help me someone.
Click to expand...
Click to collapse
There is no ROM on your device. That's why it gets stuck on the splash screen... No OS to boot into.
Sent from my Galaxy Nexus using xda premium
my device has been running cm11 unofficial version for quite sometime now.. the 20140921 version.. but recently I've started having a problem that the phone restarts suddenly.. so., i tried doing a fresh flash again.. but i keep getting the assert error. and the phone restarts. I have the recovery image which grarak had posted in the thread. But i donno how to use it. And now the problem has worsened because once I install any new app, the phone restarts on its own and after which it restores it back to the time when the app wasnt there.. I'm not able to make any new nandroid backups too coz the device restarts again.. I thought it might be a CWM error, so I tried flashing TWRP.. but its again an img file which i donno what to do.. sighs. .. and also, if i try to do a fresh flash of the official version of cm11 now, using the recovery i have now, will it show the assert error again?? thanks a lot in advance... hope someone can get me out of this mess..
mids1810 said:
my device has been running cm11 unofficial version for quite sometime now.. the 20140921 version.. but recently I've started having a problem that the phone restarts suddenly.. so., i tried doing a fresh flash again.. but i keep getting the assert error. and the phone restarts. I have the recovery image which grarak had posted in the thread. But i donno how to use it. And now the problem has worsened because once I install any new app, the phone restarts on its own and after which it restores it back to the time when the app wasnt there.. I'm not able to make any new nandroid backups too coz the device restarts again.. I thought it might be a CWM error, so I tried flashing TWRP.. but its again an img file which i donno what to do.. sighs. .. and also, if i try to do a fresh flash of the official version of cm11 now, using the recovery i have now, will it show the assert error again?? thanks a lot in advance... hope someone can get me out of this mess..
Click to expand...
Click to collapse
Download an app called Rashr. It can be used to flash the img file.
FoxyDrew said:
Download an app called Rashr. It can be used to flash the img file.
Click to expand...
Click to collapse
actually this problem is much more serious than that.... my device has kinda frozen in the present state... if i uninstall any apps and then restart the device the app remains there itself.. and if I try to install a new app, after restart, the app is nowhere to be seen.. so, in short, i cant install any new apps or make modifications to the previous ones... I'm not even able to install any other recovery due to this... it seems like there is some problem with the R/W rights.
mids1810 said:
actually this problem is much more serious than that.... my device has kinda frozen in the present state... if i uninstall any apps and then restart the device the app remains there itself.. and if I try to install a new app, after restart, the app is nowhere to be seen.. so, in short, i cant install any new apps or make modifications to the previous ones... I'm not even able to install any other recovery due to this... it seems like there is some problem with the R/W rights.
Click to expand...
Click to collapse
Youll have to boot into fastboot and flash the recovery. Press and hold volume up + power until the phone shuts down, then hold volume down + power until you get into Hboot. Then scroll down with the volume keys and select fastboot.
Check this out for how to flash the img files in fastboot http://androidforums.com/cdma-evo-3...lash-recovery-image-via-fastboot-sd-card.html
FoxyDrew said:
Youll have to boot into fastboot and flash the recovery. Press and hold volume up + power until the phone shuts down, then hold volume down + power until you get into Hboot. Then scroll down with the volume keys and select fastboot.
Check this out for how to flash the img files in fastboot http://androidforums.com/cdma-evo-3...lash-recovery-image-via-fastboot-sd-card.html
Click to expand...
Click to collapse
everything went well during the flashing process.. i had flashed a TWRP img.... but even this didnt solve the problem, even now its CWM as it was before.... Its just as it was before
C:\adb>fastboot flash recovery recovery.img
target reported max download size of 1298444288 bytes
sending 'recovery' (10540 KB)...
OKAY [ 1.528s]
writing 'recovery'...
OKAY [ 0.532s]
finished. total time: 2.065s
mids1810 said:
everything went well during the flashing process.. i had flashed a TWRP img.... but even this didnt solve the problem.... Its just as it was before
C:\adb>fastboot flash recovery recovery.img
target reported max download size of 1298444288 bytes
sending 'recovery' (10540 KB)...
OKAY [ 1.528s]
writing 'recovery'...
OKAY [ 0.532s]
finished. total time: 2.065s
Click to expand...
Click to collapse
Try a clean flash of the official CM11. If that doesn't work, tell me which variant your using.
FoxyDrew said:
Try a clean flash of the official CM11. If that doesn't work, tell me which variant your using.
Click to expand...
Click to collapse
tried that too quite many times.. it shows that "assert error thing", tried it with both the unofficial and official ones, and also I cant factory reset the device, if i do a factory reset and restart without flashing the rom, I'm stuck with the same rom, cant modify it whatsoever...
I'm using the a5dwg dual sim Indian variant
mids1810 said:
tried that too quite many times.. it shows that "assert error thing", tried it with both the unofficial and official ones, and also I cant factory reset the device, if i do a factory reset and restart without flashing the rom, I'm stuck with the same rom, cant modify it whatsoever...
I'm using the a5dwg dual sim Indian variant
Click to expand...
Click to collapse
Use THIS recovery.img file. Flash that in fastboot, reboot into recovery, then do a full wipe (factory reset, cache, dalvik cache, /system, /boot) and reflash the newest official CM11 nightly.
FoxyDrew said:
Use THIS recovery.img file. Flash that in fastboot, reboot into recovery, then do a full wipe (factory reset, cache, dalvik cache, /system, /boot) and reflash the newest official CM11 nightly.
Click to expand...
Click to collapse
this is the error which i get:
Installing update.....
assert failed: run_program("/system/bin/makelinks.sh") == 0
E: Error in / sorage/sdcard1/cm-11-20141025-NIGHTLY-a5_2.zip
(Status 7)
Installation aborted.
mids1810 said:
this is the error which i get:
Installing update.....
assert failed: run_program("/system/bin/makelinks.sh") == 0
E: Error in / sorage/sdcard1/cm-11-20141025-NIGHTLY-a5_2.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Are you sure you flashed the recovery I linked you too. That's the EXACT error you get if you don't flash that recovery.
FoxyDrew said:
Are you sure you flashed the recovery I linked you too. That's the EXACT error you get if you don't flash that recovery.
Click to expand...
Click to collapse
Yes... I had tried using the recovery which you linked.. Is this problem in any ways related to this thread?
http://forum.xda-developers.com/showthread.php?t=2707378
I tried to add the wp_mod.ko file too... but there's no folder called as "modules" in the bin folder...
I feel its because of some problem with the read write issue.. since I'm not able to bring about any change in the system whatsoever except for changes made in the sd card.. they all get reverted after the reboot
mids1810 said:
Yes... I had tried using the recovery which you linked.. Is this problem in any ways related to this thread?
http://forum.xda-developers.com/showthread.php?t=2707378
I tried to add the wp_mod.ko file too... but there's no folder called as "modules" in the bin folder...
I feel its because of some problem with the read write issue.. since I'm not able to bring about any change in the system whatsoever except for changes made in the sd card.. they all get reverted after the reboot
Click to expand...
Click to collapse
In CM you can read and write to everywhere with no problem. You problem is weird, flash a RUU.
hmm...cant find a RUU for my variant though...
mids1810 said:
hmm...cant find a RUU for my variant though...
Click to expand...
Click to collapse
Well, try this Philz recovery, its the same one I'm using, and flash the newest build, which is the same one I'm using. If that doesn't work I honestly don't know what to tell you.
FoxyDrew said:
Well, try this Philz recovery, its the same one I'm using, and flash the newest build, which is the same one I'm using. If that doesn't work I honestly don't know what to tell you.
Click to expand...
Click to collapse
the same as before... cant get out of CWM..
mids1810 said:
Yes... I had tried using the recovery which you linked.. Is this problem in any ways related to this thread?
http://forum.xda-developers.com/showthread.php?t=2707378
I tried to add the wp_mod.ko file too... but there's no folder called as "modules" in the bin folder...
I feel its because of some problem with the read write issue.. since I'm not able to bring about any change in the system whatsoever except for changes made in the sd card.. they all get reverted after the reboot
Click to expand...
Click to collapse
@mids1810
Ok let's see, so your saying that the device won't allow to read or write, meaning 1 of 2 things.
Either you lost root access by uninstalling or modifying something, or
your device has accumulated too much background information / app data and it won't allow it to make any more changes due to limited or in other words, there's no space.
If you have CWM 6.0.4.7 then you will get the assert error every time. This is just to make sure you do have it flashed.
First thing's first.
-Go into your bootloader and go into fastboot mode. Plug it into the PC and it will say fastboot USB.
-Now download and run this .exe:
https://www.dropbox.com/s/7nn4a5xzx2pw7as/CWM_Recovery_en.exe?dl=1
-This will flash the latest 6.0.5.1 CWM automatically.
1. Now that you have the latest recovery installed,
-Boot into the recovery and wipe the CACHE and go into advanced options and wipe DALVIK CACHE. Do not press factory restore.
-Hit reboot device and test by installing an app to see if this fixes the issue.
2. If it still reboots after installing an app then download this .zip:
http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip?retrieve_file=1
-Put this zip on your SD card/internal storage
-Go into CWM and flash this .zip.
-Reboot the device and test again.
3. If BOTH of these steps failed then you will need to freshly install CM11.
-While the device is still on, put the latest CM11 on your device or recycle the same one that your using if you prefer its stability.
-Boot back into CWM and do a factory restore.
Factory restore is almost ALWAYS necessary for every time you flash CyanogenMod unless it is an update that specifically states it can be "dirty flashed" which is just a way of saying you flashed it without wiping all your information - data/cache/dalvik off of it.
Let me know how this goes for you. :laugh:
jaysoblitzed said:
@mids1810
Ok let's see, so your saying that the device won't allow to read or write, meaning 1 of 2 things.
Either you lost root access by uninstalling or modifying something, or
your device has accumulated too much background information / app data and it won't allow it to make any more changes due to limited or in other words, there's no space.
If you have CWM 6.0.4.7 then you will get the assert error every time. This is just to make sure you do have it flashed.
First thing's first.
-Go into your bootloader and go into fastboot mode.
Yeah i already had the CWM 6.0.5.1 running on my device, but I flashed it again just in case.... That didnt solve the issue.
Next I flashed the Super SU zip from my SD card(since anything I place in my internal storage vanishes once I reboot... even if rebooted in my recovery) That again didnt solve the problem
I did a fresh install of CM11, 20140921 which I am running at present due to the stability issue you mentioned.. (have tried with the official nightly a couple of times to no avail)... It shows the assert error just as before, all the time.
And yes, all the apps I uninstalled came back again, as always Completely out of any more ideas... And also I get quite many error messages often " so and so app stopped responding" and stuff
Click to expand...
Click to collapse
mids1810 said:
jaysoblitzed said:
@mids1810
Ok let's see, so your saying that the device won't allow to read or write, meaning 1 of 2 things.
Either you lost root access by uninstalling or modifying something, or
your device has accumulated too much background information / app data and it won't allow it to make any more changes due to limited or in other words, there's no space.
If you have CWM 6.0.4.7 then you will get the assert error every time. This is just to make sure you do have it flashed.
First thing's first.
-Go into your bootloader and go into fastboot mode.
Yeah i already had the CWM 6.0.5.1 running on my device, but I flashed it again just in case.... That didnt solve the issue.
Next I flashed the Super SU zip from my SD card(since anything I place in my internal storage vanishes once I reboot... even if rebooted in my recovery) That again didnt solve the problem
I did a fresh install of CM11, 20140921 which I am running at present due to the stability issue you mentioned.. (have tried with the official nightly a couple of times to no avail)... It shows the assert error just as before, all the time.
And yes, all the apps I uninstalled came back again, as always Completely out of any more ideas... And also I get quite many error messages often " so and so app stopped responding" and stuff
Click to expand...
Click to collapse
Did you try wiping JUST the Cache and the Dalvik cache WITHOUT doing a factory restore? These options are in CWMR.
Also, what is your device model? (a5_dug/chl/dwg/ul etc.)
If your not sure it says it at the top when your in the bootloader.
Click to expand...
Click to collapse
jaysoblitzed said:
mids1810 said:
Did you try wiping JUST the Cache and the Dalvik cache WITHOUT doing a factory restore? These options are in CWMR.
Also, what is your device model? (a5_dug/chl/dwg/ul etc.)
If your not sure it says it at the top when your in the bootloader.
Click to expand...
Click to collapse
yeah.. I did try.. without any difference in the results.
My device is the a5dwg dual sim Indian variant
Click to expand...
Click to collapse
jaysoblitzed said:
mids1810 said:
Did you try wiping JUST the Cache and the Dalvik cache WITHOUT doing a factory restore? These options are in CWMR.
Also, what is your device model? (a5_dug/chl/dwg/ul etc.)
If your not sure it says it at the top when your in the bootloader.
Click to expand...
Click to collapse
Follow this guide and restore your phone back to stock.
http://forum.xda-developers.com/desire-816/general/rombackup-t2811252
Its an TWRP nandroid backup of the original software, and if you have an updated version it will be able to update as well if you flash the stock recovery.
Click to expand...
Click to collapse
Link to app. - https://dbp.noobdev.io/downloads/
https://dbp.noobdev.io/files/9.2.0....atcherAndroid-9.2.0.r25.g0638efb-snapshot.apk
Official website. dpb.noobdev.io
Offcial thread -
https://forum.xda-developers.com/showthread.php?t=2447534
All the steps on how to use are on the official thread
All the credits goes to official developer chenxiaolong
Thanks to rom developers also
Status- stable
Its working and tested by me
U may encounter tz verification failed
For this use twrp to flash patched zip or u can edit updater script in patched zip file amd remove lines for verification of tz version (solved)
Will solve this asap
"asus.verify_trustzone() failed to read current TZ version: 2"
Getting above error on flashing.
I patched for installing in ext_sdcard.
aadi50 said:
"asus.verify_trustzone() failed to read current TZ version: 2"
Getting above error on flashing.
I patched for installing in ext_sdcard.
Click to expand...
Click to collapse
yes
I will solve this asap
aadi50 said:
"asus.verify_trustzone() failed to read current TZ version: 2"
Getting above error on flashing.
I patched for installing in ext_sdcard.
Click to expand...
Click to collapse
u can use twrp to flash the patched zip
Or just edit the updater script and remove lines verifying the tz
addy692 said:
u can use twrp to flash the patched zip
Or just edit the updater script and remove lines verifying the tz
Click to expand...
Click to collapse
So I removed line verifying tz and then patched zip and flashed from in-app and it flashed and then booted successfully.
aadi50 said:
So I removed line verifying tz and then patched zip and flashed from in-app and it flashed and then booted successfully.
Click to expand...
Click to collapse
I had solved that tz fail
It will be fixed in the new update of tha app hopefully
addy692 said:
I had solved that tz fail
It will be fixed in the new update of tha app hopefully
Click to expand...
Click to collapse
Ok. Good work. I will try.
Can you confirm if app sharing works or not?? I tried but it never worked.
Error
It's showing device's codename asus_zool_93 is not recognized...error
Kevin0916 said:
It's showing device's codename asus_zool_93 is not recognized...error
Click to expand...
Click to collapse
Ok i will add this on next update
And please let me more codenames used for this device
I wil add that
Kevin0916 said:
It's showing device's codename asus_zool_93 is not recognized...error
Click to expand...
Click to collapse
If u want to work thid now
Then change ur codename in buuld.prop
To Z00L
addy692 said:
If u want to work thid now
Then change ur codename in buuld.prop
To Z00L
Click to expand...
Click to collapse
ohhk...thanks
addy692 said:
If u want to work thid now
Then change ur codename in buuld.prop
To Z00L
Click to expand...
Click to collapse
I think i will wait for the update...becoz the ro.build.product is showing Z00L....
Kevin0916 said:
I think i will wait for the update...becoz the ro.build.product is showing Z00L....
Click to expand...
Click to collapse
Just change the value which is
Asus_Z00L_93 to ZOOL
Kevin0916 said:
I think i will wait for the update...becoz the ro.build.product is showing Z00L....
Click to expand...
Click to collapse
new update released
Try that may be tz failed is now solved
addy692 said:
new update released
Try that may be tz failed is now solved
Click to expand...
Click to collapse
Great.. Keep it up... It is solved. Out of excitement i tried to flash many roms, i flashed XOSP, RR, AICP, OCT_OS successfully. Getting error in bliss. See attached screenshot.
And one more thing to confirm?? I am unable to flash any patched rom through twrp recovery (using v3.1.0.0). Is it only me or is it a common error.
Im TWRP, error is something like "updater process ends with error 1".
aadi50 said:
Great.. Keep it up... It is solved. Out of excitement i tried to flash many roms, i flashed XOSP, RR, AICP, OCT_OS successfully. Getting error in bliss. See attached screenshot.
And one more thing to confirm?? I am unable to flash any patched rom through twrp recovery (using v3.1.0.0). Is it only me or is it a common error.
Im TWRP, error is something like "updater process ends with error 1".
Click to expand...
Click to collapse
thanks for testing app and reporting
I will solve both things asap
i recommend to use data slot
As using extsd slot will be slower due sd card write speed
addy692 said:
new update released
Try that may be tz failed is now solved
Click to expand...
Click to collapse
It's Working now...thanks mate
aadi50 said:
Ok. Good work. I will try.
Can you confirm if app sharing works or not?? I tried but it never worked.
Click to expand...
Click to collapse
no app sharing support was dropped
aadi50 said:
Great.. Keep it up... It is solved. Out of excitement i tried to flash many roms, i flashed XOSP, RR, AICP, OCT_OS successfully. Getting error in bliss. See attached screenshot.
And one more thing to confirm?? I am unable to flash any patched rom through twrp recovery (using v3.1.0.0). Is it only me or is it a common error.
Im TWRP, error is something like "updater process ends with error 1".
Click to expand...
Click to collapse
have u tried extsd card slot
And how much it takes to boot extsd card slot rom?
In my case its not booting up
addy692 said:
have u tried extsd card slot
And how much it takes to boot extsd card slot rom?
In my case its not booting up
Click to expand...
Click to collapse
Actually, i have tried ext-sd slot only. And it works fine.
I use more than 200+ user apps in primary rom, So I cant waste my internal storage on ROMs. So I Use Ext-slot only.
And I use Samsung 64GB Class 10 (80Mbps) and It works fine.
Flashing a Rom takes 7-10min (without gapps).
And even the booting time is rarely different. First boot may take more than 5-10min. But after that its always around 2-3min.
Sense OS took much time as its larger in size. Rest are almost as i described above.
Which ROM did u tried?? I would say try RR its the fastest in booting and flashing.
Anyone available to assist?
bootloader is unlocked.
BL:C0.CD
i can boot into TWRP that is about it.
Can't boot into OS?
Mark2014 said:
Can't boot into OS?
Click to expand...
Click to collapse
correct
nflnetwork29 said:
correct
Click to expand...
Click to collapse
if u have any rom backup, just restore it.
If not, download the rom below,
https://forum.xda-developers.com/z2-play/development/rom-firehound-v4-6-1-moto-z2-play-t3811949
copy it into your sdcard
and than flash it via TWRP.
tried that got error 255
nflnetwork29 said:
tried that got error 255
Click to expand...
Click to collapse
What did you do?
Try upgrade TWRP to newest version.
Mark2014 said:
What did you do?
Try upgrade TWRP to newest version.
Click to expand...
Click to collapse
I am running TWRP version 3.2.3-0 which is latest verison
nflnetwork29 said:
I am running TWRP version 3.2.3-0 which is latest verison
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=1322778262904007189
Try wiping the entire device (DON'T wipe recovery/bootloader if even possible), then try to flash that ROM again...
nflnetwork29 said:
I am running TWRP version 3.2.3-0 which is latest verison
Click to expand...
Click to collapse
Try another TWRP version with 64bit
https://forum.xda-developers.com/z2-play/development/twrp-moto-z2-play-t3729531
Good luck.
i used
twrp_albus_treble_3.2.2_r23_64.img
Now i receive ERROR 7
Dubstepwolf123 said:
Try wiping the entire device (DON'T wipe recovery/bootloader if even possible), then try to flash that ROM again...
Click to expand...
Click to collapse
can you share the step by step ?
Using TWRP i am assuming ?
nflnetwork29 said:
can you share the step by step ?
Using TWRP i am assuming ?
Click to expand...
Click to collapse
I AM NOT RESPONSIBLE FOR ANYTHING THAT MIGHT BREAK
Yes in TWRP...
1) Enter TWRP
2) Press Wipe
3) Select "Dalvik, Cache, Data, System, Internal Storage"
4) Swipe the slider
5) Then try flashing the ROM
Dubstepwolf123 said:
Try wiping the entire device (DON'T wipe recovery/bootloader if even possible), then try to flash that ROM again...
Click to expand...
Click to collapse
Dubstepwolf123 said:
I AM NOT RESPONSIBLE FOR ANYTHING THAT MIGHT BREAK
Yes in TWRP...
1) Enter TWRP
2) Press Wipe
3) Select "Dalvik, Cache, Data, System, Internal Storage"
4) Swipe the slider
5) Then try flashing the ROM
Click to expand...
Click to collapse
Tried that still getting ERROR 7
nflnetwork29 said:
i used
twrp_albus_treble_3.2.2_r23_64.img
Now i receive ERROR 7
Click to expand...
Click to collapse
Do not use treble. Use r12 or r18 pls
https://drive.google.com/drive/folders/1NP4IQo4SkV8jz_93QK-r1qV6RwbrSE4i
still getting "Updater process ended with ERROR: 7"
I tried r12 & r18
Are you from original rom?
Mark2014 said:
Are you from original rom?
Click to expand...
Click to collapse
i upgraded phone to oreo some time ago and unlocked.
nflnetwork29 said:
i upgraded phone to oreo some time ago and unlocked.
Click to expand...
Click to collapse
try to flash another rom:
https://forum.xda-developers.com/z2-play/development/rom-pixel-experience-t3859477
nflnetwork29 said:
Anyone available to assist?
bootloader is unlocked.
BL:C0.CD
i can boot into TWRP that is about it.
Click to expand...
Click to collapse
Boot into recovery, wipe internal storage, dalvik, cache, sdcard, etc (just tick everything... don't worry, u won't wipe ur recovery)
Then connect to PC, copy over any ROM made for the Z2 Play (I use the Pixel Experience ROM for Albus)
Flash, wipe cache/dalvik, then reboot into system
Should be working...
PHP:
I can boot into twrp... However, when I try and flash the installer it says failed to mount system and another partition. Tried several variants, every way I can think of. Anyone else having this prob?
Zooandbio4me said:
PHP:
I can boot into twrp... However, when I try and flash the installer it says failed to mount system and another partition. Tried several variants, every way I can think of. Anyone else having this prob?
Click to expand...
Click to collapse
Have you tried flashing the twrp 3.3.0-0.img file to the recovery ramdisk partition instead of using the zip file?
Zooandbio4me said:
PHP:
I can boot into twrp... However, when I try and flash the installer it says failed to mount system and another partition. Tried several variants, every way I can think of. Anyone else having this prob?
Click to expand...
Click to collapse
TWRP gives this error but it still works. The system partition can't be mounted in 10 as of yet. I haven't had a problem flashing anything though. It will give that error after every flash but so far everything works.
PIXEL 2XL TRWP Android 10 PROBLEM
hi, i have the same isue with the stock Android 10 and twrp-3.2.3-1.... i cant mount SYSTEM and VENDOR and i dont know how to remove TRWP... any help please...?
EDIT: this is what i get when i try to start in recovery mode:
them he erase all and reboot
EDIT: i have the TRWP in the slot A then i cant boot the system in the slot B, the photo is when i try to boot in recovery mode on the slot B i think...
estemanito said:
hi, i have the same isue with the stock Android 10 and twrp-3.2.3-1.... i cant mount SYSTEM and VENDOR and i dont know how to remove TRWP... any help please...?
this is what i get when i try to start in recovery mode:
them he erase all and reboot
Click to expand...
Click to collapse
Fastboot the stock boot.img to remove twrp. Then try using twrp version 3.3.0-0. You will still throw mounting errors when you flash zips, but it will still work :good:
it worked thank you !
EDIT: twrp-3.3.0-0 still not working on my PIXEL 2XL TAIPEN
Badger50 said:
Fastboot the stock boot.img to remove twrp. Then try using twrp version 3.3.0-0. You will still throw mounting errors when you flash zips, but it will still work :good:
Click to expand...
Click to collapse
murphyjasonc said:
TWRP gives this error but it still works. The system partition can't be mounted in 10 as of yet. I haven't had a problem flashing anything though. It will give that error after every flash but so far everything works.
Click to expand...
Click to collapse
+11111
Just ignore the warning and pretend it doesn't exist, known issue, no effect on the installs.
andy6685 said:
+11111
Just ignore the warning and pretend it doesn't exist, known issue, no effect on the installs.
Click to expand...
Click to collapse
I know it works for installs, but what about nandroid backups?
andy6685 said:
+11111
Just ignore the warning and pretend it doesn't exist, known issue, no effect on the installs.
Click to expand...
Click to collapse
I'm on the Android 10 version of pixel dust rom and I had to side load the rom, trwp, and magisk because I kept getting those errors. After the rom booted up, I booted back into twrp via the rom and everything was fine. Super weird, but everything worked ?.
jlokos said:
I know it works for installs, but what about nandroid backups?
Click to expand...
Click to collapse
On Android 10 the /system partition is locked at read only so it can't be mounted in TWRP as read write. To do a nandroid backup go to mount and select mount partitions as read only and check /system and /vendor then do the backup