Develop Bugs

[RECOVERY][jactivelte] CWM 6.0.5.1 - PhilZ Touch 6.57.9

Main thread + features + install instructions (don't follow) + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Last version can be found here:
https://drive.google.com/folderview?id=0ByEZDplbxwxJVW54a1QzNHVXZ3c&usp=sharing
How to flash
Download tar file from download link
Download odin (3.07 recommended ) just search for it on xda
Open odin
do whats here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
connect device to download mode and hit start

Thanks for this :good::good::good:
This make the Modding more easyer
Downloaded
Installed
Works fine (Install ZIPs, Backup to internal SD Card tested)
Nice Work

Is installation only possible with this Windows tools? Even when an older CWM-based Recovery is installed?

defim said:
Is installation only possible with this Windows tools? Even when an older CWM-based Recovery is installed?
Click to expand...
Click to collapse
I could make recovery installers but m lazy to do so you can take the recovery out of the tar ball and flash it with heimdall if you are using linux

mythi said:
I could make recovery installers but m lazy to do so you can take the recovery out of the tar ball and flash it with heimdall if you are using linux
Click to expand...
Click to collapse
Finally we've full operational recovery.
Thanks.

The Screenshoots works in the Recovery.... but in the Aroma Installer it is not working. Do you know how i can make Screenshoots from the Aroma Installer?

Darkman said:
The Screenshoots works in the Recovery.... but in the Aroma Installer it is not working. Do you know how i can make Screenshoots from the Aroma Installer?
Click to expand...
Click to collapse
did you place aroma installer zip on the correct place on the phone

mythi said:
I could make recovery installers but m lazy to do so you can take the recovery out of the tar ball and flash it with heimdall if you are using linux
Click to expand...
Click to collapse
Thanks, I've a Windows but the USB is a little unstable...

The Aroma Installer works fine
I want only make Screenshoots from the Aroma Installer

I have to say, this is very good, still concerned that it is an unsupported recovery now, though I did see that Philz updated sources today with a fixed lib file. Good work @mythi. Are you going to update this or does it matter?

Pkt_Lnt said:
I have to say, this is very good, still concerned that it is an unsupported recovery now, though I did see that Philz updated sources today with a fixed lib file. Good work @mythi. Are you going to update this or does it matter?
Click to expand...
Click to collapse
Yeah ... Sure when the weekend comes :~)

mythi said:
Yeah ... Sure when the weekend comes :~)
Click to expand...
Click to collapse
Good, I get errors in Philz now second time using it. Here is a link to the post.
http://forum.xda-developers.com/showpost.php?p=55842367&postcount=5567

Pkt_Lnt said:
Good, I get errors in Philz now second time using it. Here is a link to the post.
http://forum.xda-developers.com/showpost.php?p=55842367&postcount=5567
Click to expand...
Click to collapse
Should be fixed on next release but m not facing issues with it anyway .. Twrp is gonna be updated to latest version too

@Pkt_Lnt the latest version doesn't boot no matter what i do , the libguitouch.a is a binary file which cannot be edited easily atleast through hex-editing , i will look on to some help but i don't gurntee it booting as Mr Philz dropped the support :crying:

mythi said:
@Pkt_Lnt the latest version doesn't boot no matter what i do , the libguitouch.a is a binary file which cannot be edited easily atleast through hex-editing , i will look on to some help but i don't gurntee it booting as Mr Philz dropped the support :crying:
Click to expand...
Click to collapse
Why would he post the fact that it needs fixed and the fix in that thread then? I know he stopped support due to work, but then he must feel it important enough to post about it?

Hi guys. Does anyone know if backup and restore works on 4.4.2 kitkat with this recovery?

I'll answer my own question. Yes it does, as I did a restore from my backup last night making it, imho the best recovery for our device.
Sent from my GT-I9295 using Tapatalk 2

dazzawill said:
I'll answer my own question. Yes it does, as I did a restore from my backup last night making it, imho the best recovery for our device.
Sent from my GT-I9295 using Tapatalk 2
Click to expand...
Click to collapse
CWM is very outdated, brain dead (it will kill root on zip flashes) and unsupported. Philz is a better choice if you like that kind of recovery, but it is abandoned as well. TWRP is a better choice if you grab the one from the Multi-ROM thread. http://forum.xda-developers.com/gal...mod-multirom-v30-multirom-twrp-i9295-t2962492

philz touch builds are currently broken on cm12 so there isnt much todo on cm12 , will see if its same on cm11

Am i the only one with following problem?
When i turn off the phone and plug in the power cable, the Stock charging animation appears but its freezed. After 15 seconds a smaler charging animation appears. Next thing is: During this, i cant use the power button to power on the phone. The phone restarts, but it will go back into the charging animation. I must unplug the power cable to boot the phone into android.
I think this is a problem of CWM/PhilZ ?!
PhilZ Touch 6.57.9 CWM 6.0.5.1 with CM12 official nightly.

[Q]Testing . . . . . , Nokia N1 Wire Brush

Today, I use the Nexus's wire brush reboot into Nokia N1's Bootloader successfully .
So, I think the Nexus's rom could be worked on Nokia N1.
I had checked the Nokia N1 's kernel version , it seems like the Asus Pad rom.
I hope someone could give me a hand to finish it together .
Thank you !

Velunce said:
Today, I use the Nexus's wire brush reboot into Nokia N1's Bootloader successfully .
So, I think the Nexus's rom could be worked on Nokia N1.
I had checked the Nokia N1 's kernel version , it seems like the Asus Pad rom.
I hope someone could give me a hand to finish it together .
Thank you !
Click to expand...
Click to collapse
I've rooted my N1 and installed GAPPS by following This Post. Really Thanks to the author to complete N1.
You need to download the IntelAndroid-FBRL 05-16-2015 Public Trail Release, and choose the "T4" trigger
So, by applying tethered CWM, flush the rom into N1 can be no difficulty, I think.
Have a nice day :good:

sadfrog_lin said:
I've rooted my N1 and installed GAPPS by following This Post. Really Thanks to the author to complete N1.
You need to download the IntelAndroid-FBRL 05-16-2015 Public Trail Release, and choose the "T4" trigger
So, by applying tethered CWM, flush the rom into N1 can be no difficulty, I think.
Have a nice day :good:
Click to expand...
Click to collapse
It's a really good news.

sadfrog_lin said:
I've rooted my N1 and installed GAPPS by following This Post. Really Thanks to the author to complete N1.
You need to download the IntelAndroid-FBRL 05-16-2015 Public Trail Release, and choose the "T4" trigger
So, by applying tethered CWM, flush the rom into N1 can be no difficulty, I think.
Have a nice day :good:
Click to expand...
Click to collapse
Can you post more detailed instructions ? please !
And wich Nokia ROM version you have ?

sadfrog_lin said:
I've rooted my N1 and installed GAPPS by following This Post. Really Thanks to the author to complete N1.
You need to download the IntelAndroid-FBRL 05-16-2015 Public Trail Release, and choose the "T4" trigger
So, by applying tethered CWM, flush the rom into N1 can be no difficulty, I think.
Have a nice day :good:
Click to expand...
Click to collapse
I mean that ....... . I could be find a way to wire brush the Nokia N1 without root .
So , I need your rooted nokia n1's pics .
Can give me a favor?
Thanks a lot !

Velunce said:
I mean that ....... . I could be find a way to wire brush the Nokia N1 without root .
So , I need your rooted nokia n1's pics .
Can give me a favor?
Thanks a lot !
Click to expand...
Click to collapse
I can confirm. This method work fine !!!!!
I write small step by step manual for Rooting and installing GApps
http://forum.xda-developers.com/showpost.php?p=60839233&postcount=38
About pics :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

rumambo said:
I can confirm. This method work fine !!!!!
I write small step by step manual for Rooting and installing GApps
http://forum.xda-developers.com/showpost.php?p=60839233&postcount=38
About pics :
Click to expand...
Click to collapse
Yesterday, I was success root and install gapps.
But Chrome was crash when run( play store said not compatible with N1 But I was install from backuped APK)
I was erase all data and cache but can't run.
Any guys have idea solve this issue?

rumambo said:
I can confirm. This method work fine !!!!!
I write small step by step manual for Rooting and installing GApps
http://forum.xda-developers.com/showpost.php?p=60839233&postcount=38
About pics :
Click to expand...
Click to collapse
How about OTA updates? Is there a way to update firmware if it stops working?
Best regards

stuck at recovery 3e
yesterday, i used temp cwm recovery to create a nandroid backup, then i restore it. After that, it alway boot into recovery 3e. Anyone have solution?

alan_greece said:
yesterday, i used temp cwm recovery to create a nandroid backup, then i restore it. After that, it alway boot into recovery 3e. Anyone have solution?
Click to expand...
Click to collapse
Have you solve your problems?

still waiting for solutions

Reflash the full device: Download the 204 update ( http://forum.xda-developers.com/showpost.php?p=59750742&postcount=2 ) and reflash the full system. If it works please write it down how it went.

syddd said:
Reflash the full device: Download the 204 update ( http://forum.xda-developers.com/showpost.php?p=59750742&postcount=2 ) and reflash the full system. If it works please write it down how it went.
Click to expand...
Click to collapse
Test that with sideload.
But it's fail. Can't write over newer build.

soondin said:
Test that with sideload.
But it's fail. Can't write over newer build.
Click to expand...
Click to collapse
did you try sideload via temp cwm?

soondin said:
Test that with sideload.
But it's fail. Can't write over newer build.
Click to expand...
Click to collapse
h_t_t_p://ota-service.oss.fc811.com/upload/Nokia/moorefield/Nokia_N1/N1-china2015/A5CN507_update.zip
this can be sideload in recovery 3e. (To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!:laugh::laugh

Xkernels said:
http://ota-service.oss.fc811.com/upload/Nokia/moorefield/Nokia_N1/N1-china2015/A5CN507_update.zip
this can be sideload(To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!:laugh::laugh
http://www.fc811.com/OTA/login
waitting for hacking:laugh:
old version:http://ota-service.oss.fc811.com/upload/Nokia/moorefield/Nokia_N1/N1-china2015/A5CN410_update.zip
Click to expand...
Click to collapse

alan_greece said:
did you try sideload via temp cwm?
Click to expand...
Click to collapse
As many as I know.
Temp CWM not support Sideload

soondin said:
As many as I know.
Temp CWM not support Sideload
Click to expand...
Click to collapse
how did you install gapps and root?
---------- Post added at 05:23 AM ---------- Previous post was at 05:20 AM ----------
Xkernels said:
h_t_t_p://ota-service.oss.fc811.com/upload/Nokia/moorefield/Nokia_N1/N1-china2015/A5CN507_update.zip
this can be sideload in recovery 3e. (To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!:laugh::laugh
View attachment 3336188
Click to expand...
Click to collapse
perfect! it's work, thx

alan_greece said:
how did you install gapps and root?
Before Temp CWM copy zip files to Internal storage and install zip .
Click to expand...
Click to collapse

Mstar S700 (Review) 5.5" HD, Touch ID, MTK6752, 4G LTE, Android 5.0, 2GB RAM/16GB ROM

Mstar S700 (Review) 5.5" HD, Touch ID, MTK6752, 4G LTE, Android 5.0, 2GB RAM/16GB ROM
The Mstar S700 is the EVIL twin to the Mlais M7 it is very similar in design and specifications, but the Mstar is up to 40 USD cheaper. But does not have touch buttons with backlight like the Mlais M7 does. Also the rear camera is only an OmniVision OV and not Sony IMX135 like in the Mlais M7. And last but not least, the S700 comes with 2GB RAM, where the M7 has 3GB RAM. So they are not exact the same.
UNBOXING
REVIEW
Notice: The GPS actually seems more stable and accurate on the Mstar S700 than on the Mlais M7.
To check if the Mstar S700 works in your country and with your carriers network check it on: http://www.willmyphonework.net
Geekbench 3 Battery Test: http://browser.primatelabs.com/battery3/68036
AnTuTu Score: 47.222
Camera samples here: http://www.mediafire.com/folder/xbnnqx6qc7828/Mstar_S700_Camera_Samples
Highlights
5.5 inch IPS OGS, HD 1280x720 pixels
MTK6752 Octa Core, 1.7GHz
GPU: Mali-T760
Android 5.0 OS
2GB RAM + 16GB ROM
Dual SIM card dual standby
Fingerprint Touch ID on the back
CNC Metal Frame
13.0MP back camera, 5.0MP front camera
Support FDD LTE/4G/3G/GPS/Wifi/Bluetooth
Networking:2G: GSM 850/900/1800/1900MHz, 3G:WCDMA:850/900/1900/2100MHz, 4G:FDD LTE:800/1800/2100/2600MHz
Source: s7yler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

i am looking for a rom, some link??
thanks

I like this phone's design.

I also have this phone
Camera sample pictures etc. on my blog: http://colonelzap.blogspot.de/2015/06/mstar-s700-review-mt6752-64-bit-octa.html

Beautiful phone. Is it possible to root it ?

mstar and mlais have the same rom?

split52 said:
mstar and mlais have the same rom?
Click to expand...
Click to collapse
No, as cameras (and then also drivers) are different, also only the Mlais have backlight in the touch buttons, also controlled by software.

Have anyone found the original stock ROM yet for the phone?

rom
s7yler said:
Have anyone found the original stock ROM yet for the phone?
Click to expand...
Click to collapse
we have a big problem with mstar, mstar not give support for rom, i have spoken with mstar with email,facebook, skype and my wife(chinese)call mstar and only ota support, crazy company, my s700 dont arrived yet, dhl said 06/16, so, to late for not buy this phone, all brands smartphone you can find rom, but mstar no,i will try make a copy from a rom when i get the phone for make a recovery and root.sorry my bad english:silly:

Hello,
I can not flash with SP Tool (for custom recovery and root). Phone is not detected... Driver problem ? (Win 7). One idea to solve the problem ? Thanks.

bephithes said:
Hello,
I can not flash with SP Tool (for custom recovery and root). Phone is not detected... Driver problem ? (Win 7). One idea to solve the problem ? Thanks.
Click to expand...
Click to collapse
hi, where did you find the recovery and boot for s700?? can you give me the link?? about drivers try this one..http://www.mlais.com/service/download/Driver_Auto_Installer.rar

I received this mail by XDA developpers :
Guide & files needed to ROOT & install Xposed
1. Download the needed files here. mediafire.com/download/7rewklgf9jo78y5/ROOT_Xposed_for_Mlais_M7_with_Android_5.0_s7yler.rar
2. Unpack the rar file, start with 1, flash the custom recovery with SP Flash Tool
3. Enter the Custom Recovery on the phone and install BETA-SuperSU-v2.49.zip
4. Reboot, ROOT done! check now with root checker!
5. For Xposed enter the Custom Recovery again and install xposed-sdk21-arm64-20150430.zip
6. Install the APK XposedInstaller 3.0-alpha2

bephithes said:
I received this mail by XDA developpers :
Guide & files needed to ROOT & install Xposed
1. Download the needed files here. mediafire.com/download/7rewklgf9jo78y5/ROOT_Xposed_for_Mlais_M7_with_Android_5.0_s7yler.rar
2. Unpack the rar file, start with 1, flash the custom recovery with SP Flash Tool
3. Enter the Custom Recovery on the phone and install BETA-SuperSU-v2.49.zip
4. Reboot, ROOT done! check now with root checker!
5. For Xposed enter the Custom Recovery again and install xposed-sdk21-arm64-20150430.zip
6. Install the APK XposedInstaller 3.0-alpha2
Click to expand...
Click to collapse
mlais and mstar is not the same, before you flash something that you dont know, make sure that you have a stock rom from mstar, but that moment mstar dont have it for customers, so, you can brick the phone, first make a copy from your boot and your recovery with adb and than you can flash first the recovery from mlais, only recovery first, if works, maybe yes, you can root without the boot, by the way, my mstar arrives tomorrow and i can make more test.

split52 said:
mlais and mstar is not the same, before you flash something that you dont know, make sure that you have a stock rom from mstar, but that moment mstar dont have it for customers, so, you can brick the phone, first make a copy from your boot and your recovery with adb and than you can flash first the recovery from mlais, only recovery first, if works, maybe yes, you can root without the boot, by the way, my mstar arrives tomorrow and i can make more test.
Click to expand...
Click to collapse
Yeah actually I wrote these steps. But before we do it like that we need the original scatter file and original recovery.
The scatter I included in the RAR file is only for the Mlais M7 not for the Mstar, so please don't use that on the Mstar. Only the recovery is needed to flash, not the boot.

i am starting a forum for mstar users, is for spanish people but english is welcome too.
www.mstar.es

s7yler said:
Yeah actually I wrote these steps. But before we do it like that we need the original scatter file and original recovery.
The scatter I included in the RAR file is only for the Mlais M7 not for the Mstar, so please don't use that on the Mstar. Only the recovery is needed to flash, not the boot.
Click to expand...
Click to collapse
Right ! I'm waiting... The problem with this phone is the little space in internal for installing applications (1,94 GB). We need to root for move applications on SD card with SDlink or others.

bephithes said:
Right ! I'm waiting... The problem with this phone is the little space in internal for installing applications (1,94 GB). We need to root for move applications on SD card with SDlink or others.
Click to expand...
Click to collapse
whith fastboot you can copy the recovery, works fine

Backup firmware
Backup firmware MT67xx http://www.china-devices.com/topic/3484-how-to-backup-the-new-64-bit-mtk-mt6795-mt6752-mt6595-mt6753-over-adb/

split52 said:
whith fastboot you can copy the recovery, works fine
Click to expand...
Click to collapse
Can you please give more details ?

well, after some issue with recovery i will flash again with mlais preloader and my boot, recovery, system and works,,,,now we have a stock rom flasheable

[GUIDE] Flashing Remix OS on Teclast X16 Plus

A fellow member asked for instruction to getting Remix OS installed on Teclast X16 Plus, thus a simple write up below:
1) Download the necessary drivers - https://www.mediafire.com/?p723or9hxip5eu8
2) Download the Remix OS ROM (latest version from Teclast page B2016062701) - http://www.mediafire.com/download/84723txtl4gklzu/B2016062701.rar
3) Install the drivers in this exact sequence below
- iSocUSB-Driver-Setup-1.2.0.exe
- IntelAndroidDrvSetup1.10.0.zip
- PhoneFlashToolLite_5.5.2.0_win32.exe
When you reached the PhoneFlashToolLite installation, you will be prompted to override some of the earlier drivers installed, it is fine to override and proceed
4) Run "Phone Flash Tool LIte" , click "Browse”, go to the folder where you have downloaded and uncompressed the Remix OS ROM, choose "flash.json" and click ok
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5) Shutdown your X16 Plus from within Android, after which press simultaneously "vol up + vol down + power" buttons, release them when you see the words "DNX FASTBOOT MODE" on the screen
6) Connect your X16 Plus to your PC / laptop, if doing it for the first time, wait for the devices to be detected properly and drivers installed, by the end of which you should see on "Phone Flash Tool" a connected status and "Start to Flash" box turning blue.
7) When the flash is successful, the progress bar will turn green and shows 100%, the tablet will be disconnected automatically as it reboots, you can unplug the cable and let it boot up. The whole flashing takes about 2mins 45secs for me.
My views on the pros and cons of Remix OS:
- real easy multi windows tasking
- very solid battery life during standby
- UI is fluid and responsive
- yet to encounter an app that is incompatible and apps run well
- if a mouse is connected, right clicking will bring up functions similar to that of windows and mac os
- still a work in progress as some settings that is considered basic are not available, like "Battery"
- does not support widgets

Thank you very much.

in process,thank you for the howto. Only one thing,the intel android driver you provide,is blocked by my windows 10. He talk about an untrusted origin...downloaded from intel´s webpage.
---------- Post added at 01:07 AM ---------- Previous post was at 12:52 AM ----------
Done, working as a charm, a good review soon

Hi. A new x16 power owner here. Any update on root?

Is there any chance this would work for the X16 Pro?

Hi. I tried to install this but can't seemed to install well. Just saw the remix os logo and then it got shut down. And I lost my windows os on the dual boot session at the beginning.
Anyone knows how do I get my windows os back and got this remix working too?
Sent from my SM-G900FD using Tapatalk

wangiles said:
Hi. I tried to install this but can't seemed to install well. Just saw the remix os logo and then it got shut down. And I lost my windows os on the dual boot session at the beginning.
Anyone knows how do I get my windows os back and got this remix working too?
Sent from my SM-G900FD using Tapatalk
Click to expand...
Click to collapse
this is NOT for X16 Power, it is for X16 Plus, suggest you follow Teclast's instructions on how to flash win10 back onto the tablet.

potatohead said:
this is NOT for X16 Power, it is for X16 Plus, suggest you follow Teclast's instructions on how to flash win10 back onto the tablet.
Click to expand...
Click to collapse
Hi Potatohead,
I just want to understand well (cause I'm able to root phones or tablets, but only with a detailled methode from guys like you ^^):
Is it a multi-languages rom ?
It it a rooted rom ?
Is it a dual boot Windows/Android or only windows or only Android ?
Is it "attractive" for a basic use (I mean, for my girlfriend ^^)
Thanks a lot !
Rino (from France aka the no go zone !)

Manage to get windows reinstalled. Wonder why remix is not available for x16 power though. Will be great if able to.
Sent from my SM-P605 using Tapatalk

Anyone try this for x98 plus ii?

Please help, after flashing my tablet not boot.

joshtb86 said:
Anyone try this for x98 plus ii?
Click to expand...
Click to collapse
It's halfway working and there's a couple other threads about installing it. Several different versions of that model make it more complicated. You may need to swap in a different gpt.bin to make it flash if it's a c2e3 model. Camera, rotation, and sound wouldn't work for me. YMMV

Hello,
Installed in my Teclast X16 Plus and for now very happy because it is very fluid.
This Rom does not have root access, right? Does anyone know how to root this version?
Greetings and thanks

juansan10 said:
Hello,
This Rom does not have root access, right? Does anyone know how to root this version?
Click to expand...
Click to collapse
Hi JuanSan10
I received my X16 Plus 2 days ago and started to hack around. I managed to get a working TWRP and flash SuperSU from there if you're interested in gaining root privileges on it.
I would be happy to create a post to share it in the developers section but XDA rules doesn't allow me to post there before I posted 10 messages in general section (too bad for this time, though I understand the rule)
Would you be interested by my TWRP for the X16 Plus in order to be able to flash superSU through it ?

krustymars said:
Hi JuanSan10
I received my X16 Plus 2 days ago and started to hack around. I managed to get a working TWRP and flash SuperSU from there if you're interested in gaining root privileges on it.
I would be happy to create a post to share it in the developers section but XDA rules doesn't allow me to post there before I posted 10 messages in general section (too bad for this time, though I understand the rule)
Would you be interested by my TWRP for the X16 Plus in order to be able to flash superSU through it ?
Click to expand...
Click to collapse
Hi, I also have an x16 plus, and I'm interested in seeing your work, I liked to flash my tablet with TWRP, but really got it to work? If you can create a tutorial it would be great! thank you

Goku5 said:
Hi, I also have an x16 plus, and I'm interested in seeing your work, I liked to flash my tablet with TWRP, but really got it to work? If you can create a tutorial it would be great! thank you
Click to expand...
Click to collapse
I registered on XDA exactly to do that,create the tutorial and provide the recovery. Unfortunately I discovered the "5 to10 messages before to post in developers section" XDA rule after my registration ?
It looks like I can post yet though, so I'll create the tutorial and host the TWRP image soon enough.

krustymars said:
I registered on XDA exactly to do that,create the tutorial and provide the recovery. Unfortunately I discovered the "5 to10 messages before to post in developers section" XDA rule after my registration
It looks like I can post yet though, so I'll create the tutorial and host the TWRP image soon enough.
Click to expand...
Click to collapse
Okay, thanks for sharing, I'll be waiting.
With the twrp installed, then it is possible to install the supersu normally?
good job

Goku5 said:
Okay, thanks for sharing, I'll be waiting.
With the twrp installed, then it is possible to install the supersu normally?
good job
Click to expand...
Click to collapse
Yes it's possible,I did it on my tablet and it works like a charm.
I'm starting the tutorial writup now

Here it is @Goku5 @juansan10
TWRP on Teclast X16 Plus

krustymars said:
Here it is @Goku5
TWRP on Teclast X16 Plus
Click to expand...
Click to collapse
thanks @krustymars, I'll try tomorrow, then I'll say the result. :good:
greetings

[ROM][7.1.1][BETA][C106/C103][TWRP] JUI ROM VR12 by Cuoco92

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is modded JUI ROM by @Cuoco92 running on android 7.1.1. I do not own and make this ROM but I have asked for @Cuoco92 permission to make a thread here so that we can all refer and share this ROM in one, easy and organized place​.
I'm using C103 device but so far this ROM is working fine for me with working wifi, hotspot, bluetooth, compass and fingerprint.
Installation :​1. Boot into TWRP
2. Make a backup (optional. I don't need backups because I'm flashing this right from the beginning, migrating from EUI)
3. Wipe>Format Data (this is to remove device encryption so that you can see your internal memory in TWRP)
4. Wipe>Advanced>Cache, Dalvik/ART, System, Data (wipe)
5. Copy ROM into internal memory.
6. Go back to TWRP main page and select Install.
7. Flash the ROM.
8. Device will be automatically restarted after flashing finished. Don't worry if it does.​
Downloads :
- ROM (VR12 from GDrive)
- VR10 (stable, from AFH)​
BETA Builds Updates :​- VR13.2
Features :
- Android 7.1.1 Nougat
- New recents compared to the iOS like EUI
- Tethering data limit
- Auto connect in File Transfer Mode
- Dolby and Viper4Android pre-installed
- Latest 3.2.1 TWRP automatically flashed after ROM flash finished.
- CameraHAL3 enabled ( in Cuoco app ; pre-installed with ROM)
- Adaway pre-installed (also in Cuoco app)
- Gapps preinstalled
- Better battery life, better heating management
- Rooted with Magisk v16.3
What's working :
1. Wifi and tethering
2. Fingerprint unlock
3. Root
4. Compass
5. SLR (bokeh), Mono Mode in camera.
6. Band 3 and Band 5 LTE, WCDMA, GSM.
7. Pretty much everything so far...
What's Not Working (in BETA):
- Some users reported speaker bugs coming from C103 devices. You can try this fix here
- For some reason Vanced youtube is not working in both TWRP install and Magisk Install
- Video recording does not work due to mic problem.
- You can try the mic fix using Magisk module here and see if it fix it. Voice call is working after using this module.
- PreInstalled Viper4Android do not work and buggy. @Cuoco92 has removed it in VR13 release.​
Special thanks to @Cuoco92 for this wonderful ROM and for allowing me to create a thread for his ROM here. Check out all of his wonderful work in AFH here :​
Screenshots :​

Some camera samples :
Bokeh :
Mono :
Auto :

Some extra notes to C103 users :
This ROM was built by @Cuoco92 for C106 devices. So expect some bugs for your device as I have already written on the 1st post. However, you can this fix as shared by my local Coolpad Cool 1 community users and see if it works for you. It works for them but I have not yet tried this fix as I currently doesn't have much free time due to work.
If you're eager to fix it, you can try to :
1) Roll back stock EUI for C103.
2) Install stock EUI for C106 using Coolpad Manager.
3) Install official JUI for C106 using Coolpad Manager.
4) Install TWRP on your Official JUI.
5) Flash this Cuoco ROM.
*Some users reported their C103 works well without bugs when doing this steps since this ROM was built for C106 originally. I have not tested this yet because I have no problem with unable to record video since I don't use them. But you can try and let us all know if it works.

Thank you for shearing this Rom and a big thanks to the Dev @Cuoco92.

Magisk modules are working?

It can be works for c103 indian version??

reddsmokee said:
Magisk modules are working?
Click to expand...
Click to collapse
Which module?

[email protected] said:
It can be works for c103 indian version??
Click to expand...
Click to collapse
Works for me. Just wipe everything before flash. Follow the guides. It should work fine. I'm using C103 too.

But c103 indian version is different than Malaysian ....
After installing JUI Indian version c103 have bugs like no sound , second sim not working.

Congratulations on the initiative and thank you!

[email protected] said:
But c103 indian version is different than Malaysian ....
After installing JUI Indian version c103 have bugs like no sound , second sim not working.
Click to expand...
Click to collapse
Bro...read the first post. I AM using C103. When you do a full wipe, your device will be recognized as C106 after flashing this rom. I'm using it and so far everything is working fine. 4G LTE, second sim, speakers...

kodbz said:
Congratulations on the initiative and thank you!
Click to expand...
Click to collapse
It's about time actually. We need more thread in order to gain full functional device section.

vulturext said:
It's about time actually. We need more thread in order to gain full functional device section.
Click to expand...
Click to collapse
Maybe you should include a "From EUI to JUI" guide to avoid bricked devices.
You need to upgrade using Coolpad assistant, right?
I haven't made the move yet, but thanks for posting an organized thread. Going to upgrade my C103 soon.
Also, perhaps throw a link to GCam. Not sure which version/settings work best (haven't tested yet).

vulturext said:
Which module?
Click to expand...
Click to collapse
Generally friend, except youtube vance. For example viperx, ios emojis or systemless xposed?

Palm Trees said:
Maybe you should include a "From EUI to JUI" guide to avoid bricked devices.
You need to upgrade using Coolpad assistant, right?
I haven't made the move yet, but thanks for posting an organized thread. Going to upgrade my C103 soon.
Also, perhaps throw a link to GCam. Not sure which version/settings work best (haven't tested yet).
Click to expand...
Click to collapse
Coming soon. I don't have too much time at hand for now. Only some free time.
Edit : Guide to flash TWRP in EUI here : https://forum.xda-developers.com/android/development/guide-easy-twrp-root-using-qfil-eui-t3781171

reddsmokee said:
Generally friend, except youtube vance. For example viperx, ios emojis or systemless xposed?
Click to expand...
Click to collapse
Bro, viper4android is included in rom. Font changer is included too. I've installed busybox module from magisk manager and it's working fine. I don't use Xposed.

Very good rom, keep up the great work.

Hello, thank you for the great Work, the ROM works almost perfect.
BUT I have the Problem that my sim Card can't find any Connection at all. Before i flashed the ROM there was no Issue with it. Can anyone help?

Pavel0815 said:
Hello, thank you for the great Work, the ROM works almost perfect.
BUT I have the Problem that my sim Card can't find any Connection at all. Before i flashed the ROM there was no Issue with it. Can anyone help?
Click to expand...
Click to collapse
Have you tried creating new APN?

Yes, created new APN, checked Baseband, IMEI, Airplane Mode and so on, everthing fine. But at Testing Menu it says that Radio is turned off. (Wifi/BT is working)
Also, the SIM is not detected after a Reboot. I have to take it out and in again.