Stuck on LG Welcome Wizard - G4 Q&A, Help & Troubleshooting

Help me!
I have did root to my phone with this guide: http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765
and every thing was work but i wanted to get back yo stuck and u was stupid and i just did reset from the phone (in the setting) hopefully it will reset my phone and unroot...
and now I stuck on LG Welcome wizard like you have when you buy new phone... and i can't pass the Software Update check because I was freeze all the OTA options...
I was try to use the KDZ Flash Tool but i get error due upgrade...
what i can do? i just want access to my phone again...
Please help me

Hello and welcome to the forum.
First of all please provide some details:
Model number and software version of your phone.
Country you are living in. Which provider do you use? (Is it a branded phone?)
Which OS are you using (Win 7, 8, 10?)
Are you an advanced user?
Please check if you downloaded the right kdz for your phone.
Goto
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI
and enter your IMEI.
Your link will only work if you type:
csmgdl.lgmobile.com/dn/downloader.dev?fileKey=
and then add the rest of your url instead of the given link.

Hi guys
This URL doesn't work anymore with my G4 IMEI. It doesn't show any kdz. It was all right not long ago.
But it still works for the G2 or the G3. Any idea?

Did you got an error message?
Could you please post your response?

No error message, just no kdz to be found...
Here's the result with my UK G4:
<response req_cmd="auth_model_check" status="OK">
<auth_model_check>
<result>2</result>
<esn>35xxxxxxxxxxx</esn>
<model>LGH815</model>
<suffix>AGBRLB</suffix>
<msn>506Kxxxxxx</msn>
<esn_date/>
<sw_version/>
<sw_url/>
<sw_locale_url/>
<sw_recommand_uri/>
<app_version/>
<app_url/>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>2</prod_type>
<buyer>GBR</buyer>
<file_name/>
</auth_model_check>
</response>
And with a french G4, same thing:
<response req_cmd="auth_model_check" status="OK">
<auth_model_check>
<result>2</result>
<esn>35xxxxxxxxxxx</esn>
<model>LGH815</model>
<suffix>AFRALBS</suffix>
<msn>505KPxxxxx</msn>
<esn_date/>
<sw_version/>
<sw_url/>
<sw_locale_url/>
<sw_recommand_uri/>
<app_version/>
<app_url/>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>2</prod_type>
<buyer>FRA</buyer>
<file_name/>
</auth_model_check>
</response>
With a german G3, no problem :
<response req_cmd="auth_model_check" status="OK">
<auth_model_check>
<result>OK</result>
<esn>35xxxxxxxxxxx</esn>
<model>LGD855</model>
<suffix>ADEUTN</suffix>
<msn>406KPxxxxxx</msn>
<esn_date/>
<sw_version>D85521A_00</sw_version>
<sw_url>
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW4E9WH23288A6A4C49969V/D85521A_00.kdz
</sw_url>
<sw_locale_url/>
<sw_recommand_uri/>
<app_version/>
<app_url/>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>2</prod_type>
<buyer>DEU</buyer>
<file_name>D85521A_00.kdz</file_name>
</auth_model_check>
</response>

Very strange...
Maybe they rollout Android M 6.0?
But that's off topic here.
The problem was "Stuck on LG Welcome Wizard".
The thread starter didn't answer.
We should leave this thread...

Related

HOW TO: Start message at top

Heroes!
When I open a message (sms, pushmail, windows live, etc) it opens almost at the top of the message, but not entirely. So I have to scroll to the top of the message to view the To-list, the Cc-list, the time the message was received etc.
Does anybody know how to set messages to start at the top?
Thnx in advance.
Arend
I have the same problem im running the new black os i think its black majic.
Well for me it has always been like this... even with the original shipped ROM
ExEr101 said:
I have the same problem im running the new black os i think its black majic.
Click to expand...
Click to collapse
To be clear, it isn't an flaud/problem, it is as designed. Still, my question remains.
Dudes, come on!
10 OPEN "MAIL";
20 GOTO TOP
RUN
Hi ... at WM6 you can change this ...
... you must only modding some files ...
\windows\read_sms.409.htm
\windows\read_note.409.htm
...
PHP:
<a id="Inbox:top" />
you must only put this to the top by the files ... and save
... sorry for my bad english
dacoon said:
Hi ... at WM6 you can change this ...
... you must only modding some files ...
\windows\read_sms.409.htm
\windows\read_note.409.htm
...
PHP:
<a id="Inbox:top" />
you must only put this to the top by the files ... and save
... sorry for my bad english
Click to expand...
Click to collapse
Great, thnx 4 your post.
But I'm not sure what you mean. Could you post the files you have modified?
Thnx.
dacoon said:
Hi ... at WM6 you can change this ...
... you must only modding some files ...
\windows\read_sms.409.htm
\windows\read_note.409.htm
...
PHP:
<a id="Inbox:top" />
you must only put this to the top by the files ... and save
... sorry for my bad english
Click to expand...
Click to collapse
I'm not sure I understand where that line is supposed to be placed either. Is it placed within the <head></head> or <body></body> or what?
No ...
this tag (<a id="Inbox:top" />) is an link like in a html document ... and if you are open an sms/email etc. WM6 go to the place where it's stand.
Standard
PHP:
<html XMLNS:Inbox>
<head>
<object id="HTMLFormFactory" CLASSID="clsid:29d48cf7-ed6a-4a9d-a17a-ae9115c07a90" />
<?IMPORT NAMESPACE="Inbox" IMPLEMENTATION="#HTMLFormFactory" />
<link rel="stylesheet" href="file://\windows\read_style.0409.css" type="text/css" />
</head>
<body>
<div class="header">
<Inbox:To>
<table class="header">
<tr>
<td class="header">To:</td>
<td class="content"><Inbox:content id="TO" /></td>
</tr>
</table>
</Inbox:To>
<Inbox:Sent>
<table class="header">
<tr>
<td class="header">Sent:</td>
<td class="content"><Inbox:content id="SENT" /></td>
</tr>
</table>
</Inbox:Sent>
<a id="Inbox:top" />
<Inbox:InfoBar>
<div>
<Inbox:content id="INFOBAR" />
</div>
</Inbox:InfoBar>
<table class="header3">
<tr>
<td>
<Inbox:SenderPic>
<Inbox:content id="SENDERPIC"/>
</Inbox:SenderPic>
<Inbox:From>
<Inbox:content id="FROM" advancefocusedlink />
</Inbox:From>
<Inbox:Callback>
<table class="callback" cellspacing="0" cellpadding="0" >
<tr>
<td class="callback">Callback:</td>
<td class="content"><Inbox:content id="CALLBACK" /></td>
</tr>
</table>
</Inbox:Callback>
</td>
</tr>
</table>
<hr class="divider" size="1" />
</div>
<Inbox:Subject class="SMS">
<Inbox:content id="SUBJECT" links />
</Inbox:Subject>
<Inbox:DiscreteLink>
<Inbox:content id="DISCRETELINK" />
</Inbox:DiscreteLink>
<Inbox:Padding>
<Inbox:content id="PADDING" />
</Inbox:Padding>
</body>
</html>
... on the top
PHP:
<html XMLNS:Inbox>
<head>
<object id="HTMLFormFactory" CLASSID="clsid:29d48cf7-ed6a-4a9d-a17a-ae9115c07a90" />
<?IMPORT NAMESPACE="Inbox" IMPLEMENTATION="#HTMLFormFactory" />
<link rel="stylesheet" href="file://\windows\read_style.0409.css" type="text/css" />
</head>
<body>
<div class="header">
<a id="Inbox:top" /> //now her
<Inbox:To>
<table class="header">
<tr>
<td class="header">To:</td>
<td class="content"><Inbox:content id="TO" /></td>
</tr>
</table>
</Inbox:To>
<Inbox:Sent>
<table class="header">
<tr>
<td class="header">Sent:</td>
<td class="content"><Inbox:content id="SENT" /></td>
</tr>
</table>
</Inbox:Sent>
//from her
<Inbox:InfoBar>
<div>
<Inbox:content id="INFOBAR" />
</div>
</Inbox:InfoBar>
<table class="header3">
<tr>
<td>
<Inbox:SenderPic>
<Inbox:content id="SENDERPIC"/>
</Inbox:SenderPic>
<Inbox:From>
<Inbox:content id="FROM" advancefocusedlink />
</Inbox:From>
<Inbox:Callback>
<table class="callback" cellspacing="0" cellpadding="0" >
<tr>
<td class="callback">Callback:</td>
<td class="content"><Inbox:content id="CALLBACK" /></td>
</tr>
</table>
</Inbox:Callback>
</td>
</tr>
</table>
<hr class="divider" size="1" />
</div>
<Inbox:Subject class="SMS">
<Inbox:content id="SUBJECT" links />
</Inbox:Subject>
<Inbox:DiscreteLink>
<Inbox:content id="DISCRETELINK" />
</Inbox:DiscreteLink>
<Inbox:Padding>
<Inbox:content id="PADDING" />
</Inbox:Padding>
</body>
</html>
can you now understanding me
... and the mod file for you
Thnx. It works... but at the top of my outlook a message appeared that I cannot open and remove. It says "no sender" and "no subject". Any ideas how to remove it?

[Q] Text with attachment will not send or receive

Ok heres a good one that the search does not return a good thread so here goes.
My DINC is running a pretty much stock 2.2 ROM, rooted, Clockwork, Flash fixed to run HULU and does a great job with everything else too. I have been running this ROM for quite a while and have done nothing really to it for months except for hanging the numbers in build.prop to make it stop nagging me for the update, which I did not want nor did I install. I have always been able to receive and send test messages with or without attachments, until about a week ago when someone sent me a text with a picture attached and all I got was "message failed to download" error that keeps popping up and dinging every few minutes. Today I got on this and starting trying thiongs to see what gives and found that if I try to send a text with a picture or attachment I get "message failed to send" and retry messages now every few minutes. Since I can send and receive from my other unit (TP2) I know that the servers are working. As long as I do not try to send or receive a text with anything attached all works well, but now this thing is dinging a dozen times every few minutes and like I said I have not changed anything or loaded up anything new lately, it just crapped out. Any ideas ????? Grazi ;-)
Still working on this, no luck yet
I just tried removing the stock Mms.apk and installing the vanilla and the results are the same except that when trying to send or receive a message with attachment it force closes. Help please .
Still working on it, latest
Ok I have put the stock MS back in and still get the same problems, but I started thinking and looked in settings and under the MMS connection settings the fields were all blank. i bet somthing goes there, anyone have those settings ??????/
FIXED
Ok have a look at the fix. I do not know how the APN got the [disabled] entries in there but it did.
APN Before Editing
bolded entries will be removed
==============
<?xml version='1.0' encoding='UTF-8' standalone='yes' ?>
<apns>
<apn name="Production" numeric="00000" mcc="000" mnc="00" apn="1[disabled]" user="null" server="null" password="null" proxy="null" port="null" mmsproxy="null" mmsport="null" mmsprotocol="2.0" mmsc="http://mms.vtext.com/servlets/mms" type="mms[disabled]" />
</apns>
APN After Editing
==============
<?xml version='1.0' encoding='UTF-8' standalone='yes' ?>
<apns>
<apn name="Production" numeric="00000" mcc="000" mnc="00" apn="1" user="null" server="null" password="null" proxy="null" port="null" mmsproxy="null" mmsport="null" mmsprotocol="2.0" mmsc="http://mms.vtext.com/servlets/mms" type="mms" />
</apns>

mystery ?

Can anyone solve this mystery.
Same phone specs but one has been updated to lollipop and the other is saying 10i (the second one) is the lastest available!
<response req_cmd="auth_model_check" status="OK">
<auth_model_check>
<result>OK</result>
<esn>xxxxxxxxxxxxxx</esn>
<model>LGD855</model>
<suffix>ADEUWH</suffix>
<msn>406KPKN304885</msn>
<esn_date/>
<sw_version>D85520E_00</sw_version>
<sw_url>
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW9BBRCE029DAT549560FYS/D85520E_00.kdz
</sw_url>
<sw_locale_url/>
<sw_recommand_uri/>
<app_version/>
<app_url/>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type></chip_type>
<prod_type>2</prod_type>
</auth_model_check>
</response>
<response req_cmd="auth_model_check" status="OK">
<auth_model_check>
<result>OK</result>
<esn>xxxxxxxxxxxxxx</esn>
<model>LGD855</model>
<suffix>ADEUWH</suffix>
<msn>407KPPB828608</msn>
<esn_date/>
<sw_version>D85520E_00</sw_version>
<sw_url>
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW9BBRCE029DAT549560FYS/D85520E_00.kdz
</sw_url>
<sw_locale_url/>
<sw_recommand_uri/>
<app_version/>
<app_url/>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type></chip_type>
<prod_type>2</prod_type>
</auth_model_check>
</response>
krisbi said:
Can anyone solve this mystery.
Same phone specs but one has been updated to lollipop and the other is saying 10i (the second one) is the lastest available!
Click to expand...
Click to collapse
Umm... you accidentally double-posted same result. Recheck your post pls.
YaDr said:
Umm... you accidentally double-posted same result. Recheck your post pls.
Click to expand...
Click to collapse
sorry corrected.
krisbi said:
sorry corrected.
Click to expand...
Click to collapse
Might want to remove your esn from the second post.
I'd say it has something to do with the esn date, they are probably having a staggered roll out
crixley said:
Might want to remove your esn from the second post.
I'd say it has something to do with the esn date, they are probably having a staggered roll out
Click to expand...
Click to collapse
Thank you!

Is optimus G the same as an F6?

I am in the DR Congo and as resident computer geek it falls on me to fix things. Someone received an LG F6 but there is no display at any point. The navigation lights turn on, it beeps when connected to a computer, vibrates when connected to power and little tune during boot. But nothing at all on the screen. Ever. I have no info on what may have been done to it prior to being sent here. Can this be a software issue or only hardware? If software a possibility should I try a recovery download? Doing a hard boot recovery not likely as I can never see the screen to accept or reject the reset.
Linux does not see the phone. Windows acknowledges the existence but LG support tool and LGOSP do not connect.
Where to start knowing there is no repair man within thousands of miles?
from csmg.lgmobile
<response req_cmd="auth_model_check" status="OK">
<auth_model_check>
<result>OK</result>
<esn>013658003865011</esn>
<model>LGD500BK</model>
<suffix>BTMOBK</suffix>
<msn>401CYBD386501</msn>
<esn_date/>
<sw_version>D50010H_00</sw_version>
<sw_url>
Link to KMZ address
</sw_url>
<sw_locale_url/>
<sw_recommand_uri/>
<app_version/>
<app_url/>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>GSM</prod_type>
<buyer>TMO</buyer>
<file_name>D50010h_00.kdz</file_name>
</auth_model_check>
</response>

Stuck in download mode - what version is my d855?

I am trying to use LG FlashTool, but I am not what sure version my LG G3 is. I got it on ebay, seller was in hong kong. What version do I have and what tot/dll do I use? Thanks heaps!
csmg.lgmobile-9002/csmg/b2c/client/auth_model_check2.jsp?esn=35567xxxx
gives
<response req_cmd="auth_model_check" status="OK">
<auth_model_check>
<result>OK</result>
<esn>35567306xxxx</esn>
<model>LGD855</model>
<suffix>ADEUTN</suffix>
<msn>410KPQJ724308</msn>
<esn_date/>
<sw_version>D85530N_00</sw_version>
<sw_url>
D85530n_00_0816.kdz
</sw_url>
<sw_locale_url/>
<sw_recommand_uri/>
<app_version/>
<app_url/>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>2</prod_type>
<buyer>DEU</buyer>
<file_name>D85530n_00_0816.kdz</file_name>
</auth_model_check>
</response>
bondi_bleach said:
I am trying to use LG FlashTool, but I am not what sure version my LG G3 is. I got it on ebay, seller was in hong kong. What version do I have and what tot/dll do I use? Thanks heaps!
csmg.lgmobile-9002/csmg/b2c/client/auth_model_check2.jsp?esn=35567xxxx
gives
<response req_cmd="auth_model_check" status="OK">
<auth_model_check>
<result>OK</result>
<esn>35567306xxxx</esn>
<model>LGD855</model>
<suffix>ADEUTN</suffix>
<msn>410KPQJ724308</msn>
<esn_date/>
<sw_version>D85530N_00</sw_version>
<sw_url>
D85530n_00_0816.kdz
</sw_url>
<sw_locale_url/>
<sw_recommand_uri/>
<app_version/>
<app_url/>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>2</prod_type>
<buyer>DEU</buyer>
<file_name>D85530n_00_0816.kdz</file_name>
</auth_model_check>
</response>
Click to expand...
Click to collapse
You have LG G3 D855 with the correct kdz file and also the latest version of Marshmallow.
(You want to reflash the firmware right?)
Yes, I am trying to reflash firmware. LG Flash tool 2014 crashes when trying to use D85530N_00_0816.kdz.
I am just trying to figure out what the correct TOT/dll files to use. I have tried using LGD855AT-V10e-EUR-32G.zip with LGFlashtool, but it gives "model information check fail"
bondi_bleach said:
Yes, I am trying to reflash firmware. LG Flash tool 2014 crashes when trying to use D85530N_00_0816.kdz.
I am just trying to figure out what the correct TOT/dll files to use. I have tried using LGD855AT-V10e-EUR-32G.zip with LGFlashtool, but it gives "model information check fail"
Click to expand...
Click to collapse
It's v30c(Marshmallow) http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/D855/Android+6.0/

Categories

Resources