Hey my friend has a g4 and he decided to flash cm12.1. However when I restored some apps it bootloped. I wanted to enter twrp but when I do the hardware key combo it just decides to boot. Is there any way I can at least get into fastboot
Related
I was on stock F240L20D, 4.4.2 Kitkat, rooted, PhilZ Touch 6 installed. I've tried some ROMs before but reverted back to this one. So, basically, I've been to the recovery several times, but only used the ADB method to access it, and I've made several backups too.
However, one thing that happened today has frustrated me completely. Long story short, I thought about making a backup again, although this time, I used the power keys to get to the recovery instead of the ADB method, backup completes successfully, nothing wrong just yet, but just as I tap on 'Reboot System Now', it boots back in to recovery.
I've tried everything, tried using all the ADB commands, even going through all the options in the recovery, but it always seems to boot back in to the recovery. Really can't figure out what's happening. Any help would be extremely appreciated.
UPDATE: So I've flashed a KDZ, the Lollipop one using the LG Flash Tool. It's taking a bit too long to start, currently stuck at the U+ Lte logo. I hope it gets fixed.
UPDATE 2: It says Android is upgrading, YES YES!!!!! This is so exciting, but I'm still not convinced.
With most of cwm version after 6.4.7, any time you use power + volume up to access the recovery, you will get the boot loop. Go here and down load the zip file from the first post. Flash the zip and you should be go to go.
http://forum.xda-developers.com/showthread.php?t=2619403
Hi,
Recently my devices start to boot loop suddenly so, i decide to flash the custom rom back.after flashing the custom rom,the device still boot loop then i try to get into TWRP Recovery mode but it would not appear, then i proceed to flash the TWRP Image recovery (suspecting the recovery already missing during the flashing rom ) via FASTBOOT once the process done, i had disconnect the cable and suddenly the device screen wouldnt turn on even though i pressed the power button for a long time.
Please help.
Thanks.
asen[email protected] said:
Hi,
Recently my devices start to boot loop suddenly so, i decide to flash the custom rom back.after flashing the custom rom,the device still boot loop then i try to get into TWRP Recovery mode but it would not appear, then i proceed to flash the TWRP Image recovery (suspecting the recovery already missing during the flashing rom ) via FASTBOOT once the process done, i had disconnect the cable and suddenly the device screen wouldnt turn on even though i pressed the power button for a long time.
Please help.
Thanks.
Click to expand...
Click to collapse
Connect phone with PC and check if you Notification light turn on or not.
If it's still on, your phone got hard bricked (maybe because you mess with custom roms and TWRP). Next time follow Flash guide in each custom roms.
You can use unbrick hardbrick method (free) or get service (paid). I recommend try free method first but when use SP Flash tool, remember ONLY use "Download Only" (Some stupid local shop can use Format and you can lose IMEI too, so careful).
You can find that method easily on: Youtube, XDA, Github, Telegram,...
If you have any error, you can reply here or join Telegram group to get help.
hi i already using SP Flash tool but i stuck at this level..
My telephone keeps booting to fastboot after trying to update TWRP.
I am trying to restore the original ROM (apollo_eea_global_images_V12.5.12.0.RJDEUXM_20220208.0000.00_11.0_eea) and I can get the rom installed through fastboot but the phone enters a boot loop cycle. It starts up, vibrates shortly then reboots.
If i press volume up it goes into the original recovery menu. I have tried clearing everything and even entering safe mode but the phone will not boot.
Am i screwed?
Thanks in advance.
I installed the Pixel Experience recovery and side-loaded the zip and at least have a working OS.
I must be doing something wrong with the stock mi10t
Now i sided the miui zip and its working agian. I think i have misunderstood the procedure. I thought you only need to install the rom with flashboot and that was it.
So I loaded Lineage OS 19.1 just fine, but it caused a few issues so I decided I'd flash it back to a global stock ROM.
My first step after factory resetting the phone was going into the bootloader and wiping user data. Now I just get the boot screen and restarts when it usually would go past it.
The phone is not responding to any button press combinations as well as not loading into the bootloader when a usb is inserted while the volume down button is being help in the brief off time between restarts.
Am I stuck, do I just need to put a new motherboard in the phone? Should I not have wiped user data from the bootloader, and instead used the recovery to do so?
I do have another motherboard from a working parts phone except its Google locked, but I've heard and seen that there are ways around that.
do you have boot.img flashed without errors? on some devices, you need to add fastboot flash:raw boot_a boot.img
SurvivalHorror said:
do you have boot.img flashed without errors? on some devices, you need to add fastboot flash:raw boot_a boot.img
Click to expand...
Click to collapse
Well I did. But now it won't accept inputs. I've already swapped the motherboard. It works, but I decided to go back to Lineage AGAIN, as the stock ROM is has WAY too many issues, and now it has a similar issue after sideloading the zip from lineage. Although the recovery partition booted just fine after I flashed it with the lineage recovery img.
I've been trying to flash a custom recovery to my g7 thinq (LM-G710ULM) and have had a lot of ups and downs. Now I have the stock firmware stable (android 8) and the bootloader unlocked, but I'm having trouble installing ofox.
When I try to boot directly to ofox using fastboot the phone restarts and either gets stuck on the LG logo requiring a hard restart with the power button, or it restarts on its own. it never boots up ofox.
I'm hesitant to just flash ofox directly since its an A/B phone. I tried before with TWRP and it flashed but gave me trouble then almost bricked the phone.
I'm kind of a newb just following whatever threads i can find, forgive me if I've missed something obvious.
**edit** realizing that after unbricking my device I might be "crossflashed" and stuck in android 8. Will I need to flash 9, then 10 then 11? or can I just flash whatever rom I want assuming I can get ofox working?