I recently replaced the LCD on my M8. It came attached to the LCD frame and everything. When the phone is out of the housing (or battery cover) everything works fine, but as soon as the phone is installed in the housing the bottom half (also a bit of the right side) of the digitizer doesn't work and doesn't respond to touch. I tried removing the phone from the housing again, and everything is back to normal and working just fine.
Is this something any of you have experienced before? Any idea what it could be, and how to diagnose the error.
All help is very much appreciated.
vulfpapp said:
I recently replaced the LCD on my M8. It came attached to the LCD frame and everything. When the phone is out of the housing (or battery cover) everything works fine, but as soon as the phone is installed in the housing the bottom half (also a bit of the right side) of the digitizer doesn't work and doesn't respond to touch. I tried removing the phone from the housing again, and everything is back to normal and working just fine.
Is this something any of you have experienced before? Any idea what it could be, and how to diagnose the error.
All help is very much appreciated.
Click to expand...
Click to collapse
Am I maybe inserting the phone into the housing in the wrong way? I'm simply reversing the process of the online guides.
Does anyone found solution? Having absolutely the same problem...
Cheers
Related
Hey guys!
I'm experiencing a very strange and annoying issue with my BA, and I was wondering if I could get some input from you.
So, here goes:
The touchscreen (not LCD) in my unit was broken, and thus I decided to fix it. I purchased a new one off eBay a few weeks ago, and just yesteday I proceeded to install it. To my surprise, something seems to have gone wrong.
I power up the unit, make my way into "Allign screen", and then the last "cross" that I have to touch rarely clicks in. On the other hand, when it does get detected, it simply restarts the alligning process.
What I've tried so far:
- allign right after installation -> no luck
- hard reset (on WM2k5_v4_R2.1) -> no luck again
- opened up the unit again, repositioned the screen -> nothing
- upgraded to Logout_WM2K5_5.4.03_HN -> still nothing
Right now I'm out of ideas, and I was hoping somebody here has some. Do you think the new touchscreen might be flawed ? I'm already discussing this issue with the seller.
Thanks for reading
New touchscreen or a refurb? Same type? (toppolly / sony) Sounds like it's been stripped from an old unit to me as it's not recognising the taps in the right places - can you see somehting like a liquid spill anywhere on the panel? This is what it looks like when the overlay touches the glass.
Richard
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=9720199180&rd=1&sspagename=STRK:MEWN:IT&rd=1
That was in fact my auction. Looked like brand spanking new to me, not one single stylus mark, and also had the protective sheet on. Of course, I might be wrong
Also, no liquid spill visible anywhere.
NSD said:
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=9720199180&rd=1&sspagename=STRK%3AMEWN%3AIT&rd=1
That was in fact my auction. Looked like brand spanking new to me, not one single stylus mark, and also had the protective sheet on. Of course, I might be wrong
Also, no liquid spill visible anywhere.
Click to expand...
Click to collapse
I bought from him also and am yet to fit - I got the completley wrong module :-(
Richard
What do you mean wrong module ? The "tip" of the flex cable ? Mine seems to match with what was already there ...
Hey NSD!
I purchased the exact same module for my Himalaya device, after the touchscreen being cracked.
My father, who is an electronic engineer, soldered the flat wire from the touchscreen onto the rear side of the LCD with normal copper wires. Unfortunately I have the exact same problem a you!
After attaching the entire LCD (+touchscreen) onto the mainboard, and supplying power from the battery, I'm not able to go past the Align Screen section!!!
The touchscreen is from the manufacture 'Asian Media' (I think so...).
It can't be a coincidence, that both of our touchscreens don't respond to tapping!!!
Anybody been able to get this problem fixed??
Any help would be appreciated!!!
Kind Regards,
Tony Schattat
I never replaced the touchscreen of my BA but I have replaced the screen of my ex ipaq 6315 once.
And one thing that I know is that sometimes the screen align process is different from the normal, I mean, it keeps repeating and repeating again many times....until the unit finally passes the align step and finishes the configuration. Actually I´ve "aligned" the screen more than 30 x (when I replaced the screen).
It happened just once and then I had a completely normal unit.
A customer brought her G2 on simple mobile to me with this problem: The letter "A" wont work on portrait mode nor will the home key. I figured it was the digitizer so I replaced that with an OEM Replacement part and as soon as we booted back up the problem was still there. Could it be her OS is corrupt or possibly a warp in the case thats keeping the plate from contacting the faceplate. I'm rather stumped as I ran a logcat and I saw nothing out of the ordinary during normal input. Any help is appreciated.
Touch plate? I am confused to what you mean by this. I am not too familiar with the electronic construction of a digitizer so any info would be helpful.
The digitizer isn't coming in contact with the face plate I believe. (Sorry I used like three different words to describe the same thing in my previous post) Any tips on how to fix that would be great. I saw a video on youtube that stated a part where a heat gun would be used but I never came across a front panel (The part with "T-mobile" on it so I installed the digitizer and went along). I think I may have messed up.
i have the same problem, i dropped the phone, and the touch screen was broken, i replaced it but now the left side and home button arent worksing
ps the broken screen worked still also on the left side , did you find a solution ?
I have the same problem.
I believe it's the ribbon cable, not the Digitizer. The ribbon cables on this phone hangs between both screens and is fairly exposed at times.
I still have a couple weeks in my warranty to return it to HTC, but I can't get it to S-on. Unless I get S-on before warranty is up, I'm going to have to replace it myself.
Ribbon cables for this phone cost ~$30 on ebay. tell me if you fix it.
Any luck with this, anyone?
noticed that my touchscreen is becoming unresponsive lately so i thought that changing the multitouch might solve it. the thing is, after selecting 4 touch, touchscreen becomes totally unresponsive. i tried wipe and even flashing stock os but touchscreen is still the same.
did i screw up my touch screen? how will i know? any known repairs or fix.
thanks
Sounds like your digitalizer (the glass above the screen) is busted and needs replacement. If your phone is under warranty, claim it, if not - get a new digitalizer and if you can't change it yourself, take it to a repair shop.
Changed the digitizer but still no response
Got a headache? It's all in your head!!!
switch ROM
You said that you flashed back to stock, but how about flashing to another ROM, I mean one that has a completly diferent multitouch enabler... that might work.
kherzad said:
You said that you flashed back to stock, but how about flashing to another ROM, I mean one that has a completly diferent multitouch enabler... that might work.
Click to expand...
Click to collapse
i was able to flash stock and it means i have no root nor recovery. and adb debugging is not enabled. i am out of ideas how i will be able to solve this.
After flashing stock ROM do you face the same issue with a new Digitizer?
yes. doesnt respond to anything except volume and power. even the 4 touch buttons doesn't work. i was thinking that i have received a bad digitizer or it is a motherboard issue. with the latter i have no idea how to check
salingpusa said:
yes. doesnt respond to anything except volume and power. even the 4 touch buttons doesn't work. i was thinking that i have received a bad digitizer or it is a motherboard issue. with the latter i have no idea how to check
Click to expand...
Click to collapse
I had recently taken my Defy to a service center. I just wanted to change the earpiece and the side casing. While replacing the side casing (while removing the Digitizer) they damaged the digitizer. The main touch portion was working but the 4 soft keys were not. They replaced the digitizer and everything was fine again (had to pay for it )
If you can carefully handle the phone, you can open up the casing and try reconnecting the digitizer to the board. (Do not remove the digitizer from the casing only reconnect the cable).
Replacement is better done by a service center as it requires careful handing.
I did open the phone, removed and reconnected the cable, still the same. also tried 2 new digitizer still the same result. I guess it us the mother board . Any ideas where to get replacement board ?
Thanks
Got a headache? It's all in your head!!!
i have got the same problem like you and i have solved it.
Do compass calibration like spin the phone 3 times in flat condition (laying down face up), then have the phone standing up and rotate 3 times, then on one side, rotate 3 times and then move your defy in the shape of number "8" in the air. Re-open the screen. it is suppose to bring back your screen work like it was nothing happened.
only for my defy i've tried never did this for another but from what i see you have nothing to lose here
Tried the calibrating thing and also a new digitizer. doesn't work. So it is the motherboard.
Anyone knows where to get mother board
Got a headache? It's all in your head!!!
Getting a new board is like getting a new phone - new IMEI, price for the board should be very similar to the pricw for a new phone too. If you think about it, it IS the phone. What's there in the phone other than the board a screen and a digitizer...
Guess you're right.
Got a headache? It's all in your head!!!
I have broken screen on my htc desire hd, i have replaced the LCD+digitizer before. i know my way around this phone.
Is it easy to replace just glass screen ?
I cant see how i can seprate them. they are glued in this black glue thingy.
Better buy whole LCD + digitizer?
by.......................g0tmi1k
I need to do the same. Also since dropping the phone my Bluetooth turns on and off but doesn't always connect. (highlights or ticks option , but I'm not getting anything on the top bar). I disconnect and re-connect a few times to get it working
While I have the phone apart is there anything I can do to fix it?
Sent from my Samsung Galaxy S III using Android Revolution HD
I just replaced the glass only on mine. Unfortunately, the touch screen isn't responding. Anyone know where I might have gone wrong??? Everything else seems to work fine!
Probably a Ribbon Cable.
keithfrombm said:
I just replaced the glass only on mine. Unfortunately, the touch screen isn't responding. Anyone know where I might have gone wrong??? Everything else seems to work fine!
Click to expand...
Click to collapse
Try taking it back apart and re-place the ribbon cables back in there seat, they may not be making proper contact. If you replaced the glass without taking it apart you probably un-seated one of the cables. When working on iPhones there is a cable that is only held in place once you close it and put the phone back together.... It's a PITA.
Buy new part and dont replace . Your self its difficult. And its not easy
You can buy a "used" DHD device to replace yours. It'll be cheaper and easier... With a backup on sdcard, your device will be the same !
Hi,
I have this HTC one x which needed a digitiser replacement as no touch would register. LCD was ok but decided to get a new lcd+ digitiser. I have replaced the screen and the LCD is working fine but the digitiser is still not working. iv checked the cables none are broken and the connector for the digitiser on the booard looks ok too.
Any ideas what im doing wrong or is it a board problem? everything else works fine its just the digitiser
chwads2k8 said:
Hi,
I have this HTC one x which needed a digitiser replacement as no touch would register. LCD was ok but decided to get a new lcd+ digitiser. I have replaced the screen and the LCD is working fine but the digitiser is still not working. iv checked the cables none are broken and the connector for the digitiser on the booard looks ok too.
Any ideas what im doing wrong or is it a board problem? everything else works fine its just the digitiser
Click to expand...
Click to collapse
Guessing you have tried factory reset / re flashed the correct boot.img?
trying that now but im on win 8.1 in bootloader i have drivers installed bt no access to fastboot or adb. but when i boot into os i have adb and im pushing rom.zip as PJ46IMG.zip and see if that works
right got it working but seems i have to put presssure on screen above the digi connector when i let go it stops again
iv jus realised that i put pressure on the top right of the screen to get digitiser working but connecter is on left side so now im stumped not sure whats wrong with it
any ideas anyone?
It could be you got a digitizer that has issues. I got one myself once, had to put pressure on top left hand corner to get bottom left hand side to register. In the end I sent it back for a replacement, and the replacement worked fine. If you go through the other steps posted above and check all the flex cables/connectors out and you still have problems, my money is on a faulty digitizer - it does happen occasionally.