Hi
When I set brightness on manualy and adjust favourits % brightness , it reduce brightness after few seconds to 10% lower but % not change !!!
I am in outdoor condition often and need brightner lcd but after adjust brightness to 100% it reduce its after few second
if there is tweak for fixed this problem please tell me . i am rooted and xposet installed .
My phone is D855 16G and V20i rom .
You would probably have to turn on the "Thermal mitigation daemon" option in the hidden menu...
How to boost performance and improve outdoor visibility of the LG G3 without root
http://www.phonearena.com/news/How-to-boost-performance-and-improve-outdoor-visibility-of-the-LG-G3-without-root_id58888
Agree, it is probably related to temperature.
redduc900 said:
You would probably have to turn on the "Thermal mitigation daemon" option in the hidden menu...
How to boost performance and improve outdoor visibility of the LG G3 without root
http://www.phonearena.com/news/How-to-boost-performance-and-improve-outdoor-visibility-of-the-LG-G3-without-root_id58888
Click to expand...
Click to collapse
Not Work !
again reduce brightness after few second . this is only in outdoor . in indoor condition there is not this problem
Related
Hi, is there a way to tune the default adaptive brightness level? i find it abit bright at time. It will be good if there is a way to lower down certain % from the default brightness level.
I also facing brightness level auto ramp up randomly when unlocking the phone even when adaptive brightness was off... any help would be appreciated! :fingers-crossed:
cet90 said:
Hi, is there a way to tune the default adaptive brightness level? i find it abit bright at time. It will be good if there is a way to lower down certain % from the default brightness level.
I also facing brightness level auto ramp up randomly when unlocking the phone even when adaptive brightness was off... any help would be appreciated! :fingers-crossed:
Click to expand...
Click to collapse
As far as I know, some third-party kernels have this function built-in. Such as ElementalX kernel and Franco kernel. But another popular kerbel blu_spark does not support it.
Hi All ,
I have brightness issue in my YU Yureka phone . I don't know how , but my phones brightness level was set to low . then I tried one method suggested here to flash a torch on phone and reset the brightness level . It worked for a while but now my brightness level is set to full but still mobile screen in very dim (very low brightness) . Does any one know how to solve this
There was a display option in Marshmallow to set the brighness extra low. With Nougat Update this option seems to be replaced by an brightness protection option. This new option gives the screen an orange color and is not as dark as the option before. The autobrightness seems to be set higher at lowest brightness too. - Is there a way to get back the Marshmallow settings without xposed modules like gravity box? I bought the P2 for reading ebooks and this would save a lot battery time. I read in one review that this phone offers the option to set the lowest brightness which could be measured in no other phone test before.
hey guys,
im having trouble with adaptive brightness since some time and i am pretty sure sth has changed there.
my screen is just to dark for the most time.
some time ago i could just increase the brightness value and the adaptive brightness would work with that (higher) value, like an anchor value.
now, by doing that, i just change the overall brightness and it will jump back after some time.
is this the same for you guys? it gets obviously when being in a dark room and ramping up the brightness (with adaptive brightness enabled) to 100 percent. now when i disable adaptive brightness, exactly nothing changes in terms of brightness, however former times, there would be still an increase in brightness since 100 percent with adaptive brightness does not equal 100 percent on manual brightness (at least in a dark place). now it does.
is this the same for you? was this an update or sth?
latest stock pie, with caesium kernel.
Something in kernel settings?
siggey said:
Something in kernel settings?
Click to expand...
Click to collapse
nothing set in settings.
also just tried another one, kikasura or how it is callled. same thing.
just that we are on the same page here: you still can increase the anchor value in brightness settings. or will it, too, just increase your overall brightness for a short time and as soon as lights change or you lock the screen it will be back to previous values?
I stop using auto brightness because some times he is crazy.
I prefer manual mod, like this I have the hand on it and i consum lot less battery (It's my feeling)
Adaptive Brightness is still working fine for me. The way I like to "calibrate" it is when in pitch dark, I set it all the way down to 0. From there it'll always go maximum when in sunlight and indoors it's somewhere in between and does fine. If that's not enough, try resetting adaptive brightness:
https://www.androidpolice.com/2019/...thout-clearing-all-battery-data-apk-download/
Sent from my Pixel 2 XL using Tapatalk
It is happening the same to me on very low light scenarios, auto brightness will go to the lower value, setting the screen without almost no bright, besides I put it manually higher. Maybe this happened after a update I dont know.
FedericoUY said:
It is happening the same to me on very low light scenarios, auto brightness will go to the lower value, setting the screen without almost no bright, besides I put it manually higher. Maybe this happened after a update I dont know.
Click to expand...
Click to collapse
https://www.theverge.com/2019/4/26/18516417/how-to-adjust-android-pie-adaptive-brightness-feature
Sent from my Pixel 2 XL using Tapatalk
Hello!
I bought a Base S22 a few weeks ago and so far, I'm loving this device. But one thing that bothers me is the adaptive brightness implementation from Samsung, because its not really "adaptive". Even on some cloudy days, the brightness gets maximized and I can not change it to a lower level, because I always get the "maximized for best viewing in bright light" notification. In all other scenarios the adaptive brightness algorithm works perfectly.
Is there a way to disable this kind of behavior?
My current solution for sunny days is a Bixby routine to quickly disable adaptive brightness when I'm longer outside to save some battery.
Use manual brightness control. Adaptive brightness never worked right... no surprise it still doesn't.
You can manually lower the brightness even in adaptive mode, and hopefully it will adapt to you too.
Another options are:
- Battery Saving mode has optional "10% lower brightness "
– Battery Guardian module of Good Lock (with dependencies!) may be configured to lower brightness when phone's temperature is high
MakaanPL said:
You can manually lower the brightness even in adaptive mode, and hopefully it will adapt to you too.
Click to expand...
Click to collapse
That never works right either... The only draw back to full manual is finding the slider in bright light to jack it up. Auto is easier to temporarily use then. That said using the device in direct sunlight should be limited to seconds not minutes. Avoid whenever possible.
50% or less is best for battery and AMOLED conservation.
Using manual brightness control saves battery, display and your retinas
MakaanPL said:
You can manually lower the brightness even in adaptive mode, and hopefully it will adapt to you too.
Another options are:
- Battery Saving mode has optional "10% lower brightness "
– Battery Guardian module of Good Lock (with dependencies!) may be configured to lower brightness when phone's temperature is high
Click to expand...
Click to collapse
The problem is that the phone puts the brightness to the maximum and locks it there in bright light. Even when I use battery saving to lower the brightness by about 10%, it doesn't let me change the brightness to a lower level.
I don't know if this is just a thing on Samsung phones, because I heard that they use the adaptive brightness algorithm with KI from Google.
Mayamos said:
The problem is that the phone puts the brightness to the maximum and locks it there in bright light. Even when I use battery saving to lower the brightness by about 10%, it doesn't let me change the brightness to a lower level.
I don't know if this is just a thing on Samsung phones, because I heard that they use the adaptive brightness algorithm with KI from Google.
Click to expand...
Click to collapse
Which is why I use full manual control almost always. Invariably auto is many time too bright and has a tendency to "jump" around. Lol, human vision in much more adaptable and its nearly seamless.
The brightest stars burn the quickest... my plan is to have a display that's perfect for the life of my heavily used devices which likely will be in excess of 4+ years. Batteries are easy and cheap to replace, the displays aren't. Samsung's plan is to sell you a new phone every year.