auto brightness too low - Google Pixel 2 XL Questions & Answers

hey guys,
im having trouble with adaptive brightness since some time and i am pretty sure sth has changed there.
my screen is just to dark for the most time.
some time ago i could just increase the brightness value and the adaptive brightness would work with that (higher) value, like an anchor value.
now, by doing that, i just change the overall brightness and it will jump back after some time.
is this the same for you guys? it gets obviously when being in a dark room and ramping up the brightness (with adaptive brightness enabled) to 100 percent. now when i disable adaptive brightness, exactly nothing changes in terms of brightness, however former times, there would be still an increase in brightness since 100 percent with adaptive brightness does not equal 100 percent on manual brightness (at least in a dark place). now it does.
is this the same for you? was this an update or sth?
latest stock pie, with caesium kernel.

Something in kernel settings?

siggey said:
Something in kernel settings?
Click to expand...
Click to collapse
nothing set in settings.
also just tried another one, kikasura or how it is callled. same thing.
just that we are on the same page here: you still can increase the anchor value in brightness settings. or will it, too, just increase your overall brightness for a short time and as soon as lights change or you lock the screen it will be back to previous values?

I stop using auto brightness because some times he is crazy.
I prefer manual mod, like this I have the hand on it and i consum lot less battery (It's my feeling)

Adaptive Brightness is still working fine for me. The way I like to "calibrate" it is when in pitch dark, I set it all the way down to 0. From there it'll always go maximum when in sunlight and indoors it's somewhere in between and does fine. If that's not enough, try resetting adaptive brightness:
https://www.androidpolice.com/2019/...thout-clearing-all-battery-data-apk-download/
Sent from my Pixel 2 XL using Tapatalk

It is happening the same to me on very low light scenarios, auto brightness will go to the lower value, setting the screen without almost no bright, besides I put it manually higher. Maybe this happened after a update I dont know.

FedericoUY said:
It is happening the same to me on very low light scenarios, auto brightness will go to the lower value, setting the screen without almost no bright, besides I put it manually higher. Maybe this happened after a update I dont know.
Click to expand...
Click to collapse
https://www.theverge.com/2019/4/26/18516417/how-to-adjust-android-pie-adaptive-brightness-feature
Sent from my Pixel 2 XL using Tapatalk

Related

Auto brightness is a major problem with this phone

Been playing with my new phone and love it but man is the auto brightness a piece of crap. It sets the backlight so low you get weird banding on solid colors and off whites. Just turn brightness to 30% or so and boom its a whole different screen, colors pop and I don't notice any banding. Whites are great too.
They need to fix this fast since it comes with auto brightness on and its going to give people a bad impression.
Sent from my Galaxy Nexus using xda premium
That's the first thing I did.
auto-brightness is always a little too aggressive for my liking..
It was a problem with the Nexus S as well. Drove me nuts.
Seems AOSP roms are very aggressive with dimming.
mobilehavoc said:
Been playing with my new phone and love it but man is the auto brightness a piece of crap. It sets the backlight so low you get weird banding on solid colors and off whites. Just turn brightness to 30% or so and boom its a whole different screen, colors pop and I don't notice any banding. Whites are great too.
They need to fix this fast since it comes with auto brightness on and its going to give people a bad impression.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
known issue. Manufacturers tend to be really aggressive with this so you can get better battery life (yea I know.. pointless right?)
Just wait for custom ROMs. Or go download paulobrien's tweak for the automatic brightness settings. (of course, as others have said, you can just turn it off)
auto brightness has always sucked on Android, iOS has a customizable auto brightness that adjust to the level you put it on initially, where as on Android there's no option to adjust the default brightness when auto brightness is enabled.
rashad1 said:
auto brightness has always sucked on Android, iOS has a customizable auto brightness that adjust to the level you put it on initially, where as on Android there's no option to adjust the default brightness when auto brightness is enabled.
Click to expand...
Click to collapse
Not just iOS, even my 3 year old Nokia allows you to adjust the level of auto brightness. Wish this is native to Android. I found my Nexus One too dim on auto brightness too.
Edit (deleted): redundant post about paulobriens fix
The auto-brightness doesn't just seem too low to me but also buggy. Most of the time it's really dim, but occasionally it will suddenly shoot up to a decent level
Has anyone tried this app? https://market.android.com/details?id=com.nnevod.loggraph&feature=search_result
I find it too bright.. the display is perfectly usable on minimum brightness in a normally lit room bit it keeps winding the brightness up, draining the battery. It seems stuck on about 50%.
My Nexus S did the same thing.. Drove me nuts. I had to switch it off and force it to minimum half the time.
Hopefully the ability to tweak the levels in detail will be ported over from CM7 later. For now, you can use PaulOBrien's kernel where he adjusted it.
TonyHoyle said:
I find it too bright.. the display is perfectly usable on minimum brightness in a normally lit room bit it keeps winding the brightness up, draining the battery. It seems stuck on about 50%.
My Nexus S did the same thing.. Drove me nuts. I had to switch it off and force it to minimum half the time.
Click to expand...
Click to collapse
Same here, with my Nexus S, too bright.
This is one of the first things I do when flashing a rom on my incredible. They usually have to ramp down the brightness very quickly, probably for battery life. Cm has the tool hopefully it will be loaded soon.
Sent from my ADR6300 using XDA App
It would be nice if google added an option to set the max and min brightness used during auto. You could just raise floor a little.
Sent from my Nexus S using Tapatalk
Problem I've realized is on SAMOLED devices the screen is an absolute battery killer so there's no wonder they are aggressively keeping it dim. I bet if you ran this phone at 100% brightness just sitting idle it'd last like 10 mins

At what brightness auto level you keep your phone.

I used to have it at 100% now doing 50%. does it really affect battery?
Adjusting the brightness in general does affect battery life. Although I'm not sure how much adjusting the %, while still using the "Auto" feature will work out. My thought on adjusting the % (while still using Auto) is not so much about battery life, but rather to have some more customization on how bright you like the screen. Many folks will criticize that Auto brightness algorithms are often insufficient and too bright or too dark for the given situations.
If battery life is your concern, I would suggest ditching "Auto" altogether. Reason being, being on Auto constantly polls the light sensor which in itself uses some battery
I haven't experimented with this phone, in particular. But on a previous device, I found anecdotally that turning off Auto and manually having it set to 40% brightness increased the battery life by around 30-40%. Of course, you mileage will vary, and it will depend on how you use your phone and other factors; as well as what brightness level you prefer.
eduardmc said:
I used to have it at 100% now doing 50%. does it really affect battery?
Click to expand...
Click to collapse
redpoint73 said:
Adjusting the brightness in general does affect battery life. Although I'm not sure how much adjusting the %, while still using the "Auto" feature will work out. My thought on adjusting the % (while still using Auto) is not so much about battery life, but rather to have some more customization on how bright you like the screen. Many folks will criticize that Auto brightness algorithms are often insufficient and too bright or too dark for the given situations.
If battery life is your concern, I would suggest ditching "Auto" altogether. Reason being, being on Auto constantly polls the light sensor which in itself uses some battery
I haven't experimented with this phone, in particular. But on a previous device, I found anecdotally that turning off Auto and manually having it set to 40% brightness increased the battery life by around 30-40%. Of course, you mileage will vary, and it will depend on how you use your phone and other factors; as well as what brightness level you prefer.
Click to expand...
Click to collapse
I've always manually adjusted autobrightness and generally leave it set at around 40% and adjusting when I need to, which typically isnt a great deal each day. Very rarely go anywhere near 100% brightness. It may be worth experiementing and monitoring your battery life for auto and manual over say a week to see the results.
I was under the impression that the slider position was irrelevant if Auto was selected. So setting the slider on Auto sets the upper limit the algorithm uses?
bruce7373 said:
I was under the impression that the slider position was irrelevant if Auto was selected. So setting the slider on Auto sets the upper limit the algorithm uses?
Click to expand...
Click to collapse
Your second point seems to be the case, yes.
You will notice even if "Auto" is selected, moving the slider back and forth will make the screen dimmer/brighter for the given ambient lighting condition.
On older devices, your first point was true. Selecting one would override the other. If I remember properly, manually selecting a brightness level would deselect the "Auto" feature.
My understanding has always been that the slider sets the MAX brightness the screen will go up to when set to auto. So if you put it on 50% and go outside in bright sunlight the screen will only go up to 50% which may not be enough. I set mine on 100% and that way if I am in direct sun the screen will go as high as it can and still go down as low as is needed when in a dark room. I will also say that of all the phones I have ever owned this one has the best auto brightness implementation of them all as a stock feature.
jaseman said:
My understanding has always been that the slider sets the MAX brightness the screen will go up to when set to auto. So if you put it on 50% and go outside in bright sunlight the screen will only go up to 50% which may not be enough. I set mine on 100% and that way if I am in direct sun the screen will go as high as it can and still go down as low as is needed when in a dark room. I will also say that of all the phones I have ever owned this one has the best auto brightness implementation of them all as a stock feature.
Click to expand...
Click to collapse
That's what I thought but it's the opposite! From HTC website: "With the*Automatic brightness*option selected, drag the slider to set the maximum brightness level.*This sets a LIMIT on how bright the screen will be when*Automatic brightness*is selected"
Source: http://www.htc.com/us/support/htc-one-m8/howto/465124.html
This means that it will only affect the lowest brightness level, not the highest, meaning you can have it a 0% and it will always go to maximum brightness when in direct sunlight. I've tested this and can confirm it's empirically true.

Screen too bright at night, and turning down brightness results in too dark blacks?

This is my first AMOLED screen phone and something I think I may be noticing that maybe you guys can help confirm or deny about AMOLEDs vs LCDs, is that at night when turning the brightness down (way down, like -50 in the Lux Dash app as an example) results in getting the screen to a point where not bright enough to hurt your eyes at all but the blacks are too dark. So there's no real ideal brightness setting in a dark room that equals no eye pain but still allows you to able to see everything on the screen. Or are my eyes just too sensitive and most other people don't need to turn it down as much as I do and therefore don't have this problem?
You tried night mode
Lux is garbage. Factory adaptive brightness and still being able to use the brightness slider to allow on-the-fly adjustments is far superior - it works perfectly on this phone. And in a pitch black room, with adaptive brightness, setting the slider from 0-25% results in an extremely dim screen (1-2 nits) will information still perfectly viewable. Blacks may have uniformity issues, but that is the nature of OLED panels since it is extremely hard to control voltage at near-black levels when the brightness is extremely low.
s1dest3pnate said:
This is my first AMOLED screen phone and something I think I may be noticing that maybe you guys can help confirm or deny about AMOLEDs vs LCDs, is that at night when turning the brightness down (way down, like -50 in the Lux Dash app as an example) results in getting the screen to a point where not bright enough to hurt your eyes at all but the blacks are too dark. So there's no real ideal brightness setting in a dark room that equals no eye pain but still allows you to able to see everything on the screen. Or are my eyes just too sensitive and most other people don't need to turn it down as much as I do and therefore don't have this problem?
Click to expand...
Click to collapse
Amoled displays, when used with automatic brightness adjustment, have a small problem - when you are viewing them in the dark, they appear too dark. Their contrast ratio is infinity, which means that dark colors are basically zero luminosity or close to zero. A lot of internet imagery is calibrated for lcd displays, so when you lower your phone brightness to make the brightest parts viewable on an amoled display, the dark colors become too dark and blend together. This is especially true when you are viewing a screen in a dark environment. There's nothing you can do but increase device brightness by hand when you are using automatic brightness adjustment and viewing in the dark,
---------- Post added at 08:19 AM ---------- Previous post was at 08:07 AM ----------
Nitemare3219 said:
Lux is garbage. Factory adaptive brightness and still being able to use the brightness slider to allow on-the-fly adjustments is far superior - it works perfectly on this phone. And in a pitch black room, with adaptive brightness, setting the slider from 0-25% results in an extremely dim screen (1-2 nits) will information still perfectly viewable. Blacks may have uniformity issues, but that is the nature of OLED panels since it is extremely hard to control voltage at near-black levels when the brightness is extremely low.
Click to expand...
Click to collapse
You do realize that Adaptive Brightness simply changes the brightness of the screen in response to the light sensor reading?
In other words, the phone doesn't care about your preference - it will change the brightness to preset levels.
On Samsung phones, this situation is far more intelligent. The phone still uses the light sensor to adjust the brightness, but the phone also applies a user preset to augment the brightness - when you slide the brightness slider up, the phone will make auto brightness adjustment higher, and vise versa.
nabbed said:
You do realize that Adaptive Brightness simply changes the brightness of the screen in response to the light sensor reading?
In other words, the phone doesn't care about your preference - it will change the brightness to preset levels.
On Samsung phones, this situation is far more intelligent. The phone still uses the light sensor to adjust the brightness, but the phone also applies a user preset to augment the brightness - when you slide the brightness slider up, the phone will make auto brightness adjustment higher, and vise versa.
Click to expand...
Click to collapse
WHAT? You have it totally backwards. Stock Android, including the Pixel, uses user input to augment the auto light sensor brightness when adaptive brightness is enabled. If my phone thinks 50% brightness is appropriate, but my slider is set to 100, it will choose something like 75% brightness instead. If I drop the slider to 0% in the same instance, it might choose 25% instead. The user preference will ALWAYS be impacting auto brightness.
Samsung phones, unless it changed with Nougat, rely strictly on what the phone thinks is best for auto brightness. The user can adjust the slider with auto brightness on, but the slider is a direct adjustment 0-100% of the true brightness level, and the slider will change automatically when there is a large shift in ambient light after the display has been turned off at least once. User preference does NOT impact auto brightness unless you set it at that specific moment.
Nitemare3219 said:
WHAT? You have it totally backwards. Stock Android, including the Pixel, uses user input to augment the auto light sensor brightness when adaptive brightness is enabled. If my phone thinks 50% brightness is appropriate, but my slider is set to 100, it will choose something like 75% brightness instead. If I drop the slider to 0% in the same instance, it might choose 25% instead. The user preference will ALWAYS be impacting auto brightness.
Samsung phones, unless it changed with Nougat, rely strictly on what the phone thinks is best for auto brightness. The user can adjust the slider with auto brightness on, but the slider is a direct adjustment 0-100% of the true brightness level, and the slider will change automatically when there is a large shift in ambient light after the display has been turned off at least once. User preference does NOT impact auto brightness unless you set it at that specific moment.
Click to expand...
Click to collapse
Girl, are you kidding me? I just returned a Note 7 for Pixel XL. What were your phones?
nabbed said:
Amoled displays, when used with automatic brightness adjustment, have a small problem - when you are viewing them in the dark, they appear too dark. Their contrast ratio is infinity, which means that dark colors are basically zero luminosity or close to zero. A lot of internet imagery is calibrated for lcd displays, so when you lower your phone brightness to make the brightest parts viewable on an amoled display, the dark colors become too dark and blend together. This is especially true when you are viewing a screen in a dark environment. There's nothing you can do but increase device brightness by hand when you are using automatic brightness adjustment and viewing in the dark,
---------- Post added at 08:19 AM ---------- Previous post was at 08:07 AM ----------
You do realize that Adaptive Brightness simply changes the brightness of the screen in response to the light sensor reading?
In other words, the phone doesn't care about your preference - it will change the brightness to preset levels.
On Samsung phones, this situation is far more intelligent. The phone still uses the light sensor to adjust the brightness, but the phone also applies a user preset to augment the brightness - when you slide the brightness slider up, the phone will make auto brightness adjustment higher, and vise versa.
Click to expand...
Click to collapse
nabbed said:
Girl, are you kidding me? I just returned a Note 7 for Pixel XL. What were your phones?
Click to expand...
Click to collapse
I have a Note7, Pixel XL, and LG V20. Google how adaptive brightness works. There won't be a single article that matches how you say it works.
Nitemare3219 said:
I have a Note7, Pixel XL, and LG V20. Google how adaptive brightness works. There won't be a single article that matches how you say it works.
Click to expand...
Click to collapse
Give me evidence. I don't care what your hypothetical "articles" say, I had the actual phones and played with their brightness settings.
nabbed said:
Give me evidence. I don't care what your hypothetical "articles" say, I had the actual phones and played with their brightness settings.
Click to expand...
Click to collapse
If you seriously can't tell how adaptive brightness works just by using it as compared to Samsung and LG, I don't know what to tell you. It's pretty damn obvious. If I'm the kind of person who prefers a bright screen, I can set adaptive brightness to 100% and it will always be bright, but stay relative to the ambient lighting. If it's a dim room, the screen will be bright, but nowhere near 100% manual brightness. It only hits 100% manual brightness when under bright light like the sun.
Samsung's auto brightness is still very cookie cutter. If you put 2 Samsung phones side by side with auto brightness on, they will always be the same no matter the ambient light. If I take 2 Pixels, both set to adaptive, and put one on 25% and one in 75%, they will always maintain a brightness difference even when ambient light changes. Samsung phones do not maintain user preferences once the ambient light level changes. I almost never have to adjust my Pixel. I always have to adjust my Note7 because I prefer a slightly brighter screen.
Nitemare3219 said:
If you seriously can't tell how adaptive brightness works just by using it as compared to Samsung and LG, I don't know what to tell you. It's pretty damn obvious. If I'm the kind of person who prefers a bright screen, I can set adaptive brightness to 100% and it will always be bright, but stay relative to the ambient lighting. If it's a dim room, the screen will be bright, but nowhere near 100% manual brightness. It only hits 100% manual brightness when under bright light like the sun.
Samsung's auto brightness is still very cookie cutter. If you put 2 Samsung phones side by side with auto brightness on, they will always be the same no matter the ambient light. If I take 2 Pixels, both set to adaptive, and put one on 25% and one in 75%, they will always maintain a brightness difference even when ambient light changes. Samsung phones do not maintain user preferences once the ambient light level changes. I almost never have to adjust my Pixel. I always have to adjust my Note7 because I prefer a slightly brighter screen.
Click to expand...
Click to collapse
What you are saying is EXACTLY THE OPPOSITE of my experience with Note 7 and Pixel XL. I NEVER had to adjust my Note 7 brightness once I set it.
I find myself constantly adjusting Pixel XL brightness setting.
Maybe they both have "adaptive brightness", but the Note 7 version was perfect, and the Pixel XL is just sh`1rt.
nabbed said:
What you are saying is EXACTLY THE OPPOSITE of my experience with Note 7 and Pixel XL. I NEVER had to adjust my Note 7 brightness once I set it.
I find myself constantly adjusting Pixel XL brightness setting.
Maybe they both have "adaptive brightness", but the Note 7 version was perfect, and the Pixel XL is just sh`1rt.
Click to expand...
Click to collapse
Or maybe you two just have differing opinions on what a "perfect" brightness setting is...
Doesn't matter how you adjust your brightness. I'm just saying that when brightness is low, blacks are darker and disproportionate to other colors.
I love Lux especially with it's profiles. Much better control and accuracy than adaptive brightness. I just wish Lux had an auto-profile switcher based on time of day. I have a day profile, night profile, and car profile.
One thing to note is that Lux allows me to bring the darkness down below 0% to negative values, which is where I usually notice my concerns. But that's what I need to not hurt my eyes at night. So I don't blame the phone or anything - just posted this article out of curiosity. The blacks are probably just turning off completely at some point when I bring the value to below 0% which I think makes sense based on the nature of OLED.
You should just turn on night mode to help with eye strain. If 0% brightness is too bright I don't think you will ever get lux to work the way you want, but night mode helps my eyes a lot.
Pixel XL adaptive brightness adapts to what you set the brightness to. If you go from 0 to 100 in a totally dark room, you notice how the screen stays really bright and doesn't go back to 0 on Pix
Many phones use auto brightness to fullly determine brightness based on sensor and ignores user brightness. If you go from 0 to 100 with an auto brightness phone, the phone will go back to 0.
Some prefer one over the other.

Adaptive Brightness Issues

With adaptive brightness on my screen frequently (every 20 seconds or so) changes brightness slightly even when the ambient light isn't changing. It's very annoying when reading and most noticeable with light backgrounds.
Is this a common issue or does it sound like I have a defective sensor?
dmacarth said:
With adaptive brightness on my screen frequently (every 20 seconds or so) changes brightness slightly even when the ambient light isn't changing. It's very annoying when reading and most noticeable with light backgrounds.
Is this a common issue or does it sound like I have a defective sensor?
Click to expand...
Click to collapse
Same here.
So annoying I had to turn adaptive off.
Seems to be when I move, probably changing sensor and it's too sensitive. My head mush change/reflect light on sensor
Anyway it's so distracting that I can't use adaptive brightness, except when pitch dark I can set to 0% adaptive to have lowest light output
Sent from my Pixel 2 XL using Tapatalk
Yep, reminds me of a disco strobe light!
No issues here. I actually think the brightness swing is much better than the OG Pixel XL. I can just leave the setting at 50%. On the OG XL I'd have to turn the brightness down in the living room with lighting from 1 lamp and a tv because it'd be burning my retinas.
I installed Lux Dash and disabled "adaptive brightness" and let Lux handle it. You can go into the profile editor for Lux and setup different presets for different levels of light, you can also adjust the min and max allowed brightness and even setup how you want it to adjust brightness (fade, only set on unlock, dynamic, etc)
It has really made this screen amazing and even helps with battery because most the day my screen doesn't go above 15-20%
AndrasLOHF said:
No issues here. I actually think the brightness swing is much better than the OG Pixel XL. I can just leave the setting at 50%. On the OG XL I'd have to turn the brightness down in the living room with lighting from 1 lamp and a tv because it'd be burning my retinas.
Click to expand...
Click to collapse
I've been fine here with the Adaptive Brightness too. Doesn't change too often at all for me.
Sent from my Pixel 2 XL using Tapatalk
I installed Lux also and that did the trick. I assume the sensor is fine since Lux uses it with no problem. It's odd that some of us are having problems and others aren't but it doesn't seem to be a sensor issue.
Having this same issue any solution?
Mzzyhmd said:
Having this same issue any solution?
Click to expand...
Click to collapse
I'm curious but how exactly is it reacting for you? Are you just sitting in bed with the lights on and it's still adjusting up and down the brightness? Cause that's what I'm doing right now and it hasn't fluctuated at all. If I put it on the bedside table it'll brighten up and when I pick it up it dims but that's it.
Sent from my Pixel 2 XL using Tapatalk
Yeah that's too much fluctuations don't you think I mean on my iPhone x or any other iPhone that I have have used so far I never could tell that the adaptive brightness was on but this device does it in an obvious way and way too frequently that im not sure anymore if this is what it's supposed to do I chatted with a Google agent and they forced quit ambient service thing from system apps and I think that still didn't resolve the issue. I will pop up in a vz store tomorrow and check out if their display devices are doing the same
Mzzyhmd said:
Yeah that's too much fluctuations don't you think I mean on my iPhone x or any other iPhone that I have have used so far I never could tell that the adaptive brightness was on but this device does it in an obvious way and way too frequently that im not sure anymore if this is what it's supposed to do I chatted with a Google agent and they forced quit ambient service thing from system apps and I think that still didn't resolve the issue. I will pop up in a vz store tomorrow and check out if their display devices are doing the same
Click to expand...
Click to collapse
I'm curious to hear what the tell you. Lux has helped me a lot bit I still notice it. To be fair I think I only notice in a dim or dark room with the TV on but this is the first phone I've used where it's noticeable to me. I'm also wondering if this is how it's supposed to work or if there's something wrong with my phone.
Mzzyhmd said:
Yeah that's too much fluctuations don't you think I mean on my iPhone x or any other iPhone that I have have used so far I never could tell that the adaptive brightness was on but this device does it in an obvious way and way too frequently that im not sure anymore if this is what it's supposed to do I chatted with a Google agent and they forced quit ambient service thing from system apps and I think that still didn't resolve the issue. I will pop up in a vz store tomorrow and check out if their display devices are doing the same
Click to expand...
Click to collapse
What I described was too much? Sounds appropriate to me. If there's extra light on the phone, I want it to get brighter. If that light goes away, I want it to get dimmer. Now if it was happening with no light changing then I would be annoyed. I keep it at 29% with Adaptive Brightness on and it's not too dark in outside light and not too bright in pitch dark.
Sent from my Pixel 2 XL using Tapatalk
I'm having the same issue. I'm on my second Pixel 2 XL so I don't think it's a sensor problem. I only notice it in lower lighting but it's really annoying when it happens. Haven't seen this issue on any other phone. Im trying out Lux now and set it to only adjust when waking up. There were similar issues when Lux was set to Dynamic.
Ever since Google thought they knew better than everyone else and got rid of auto brightness for adaptive brightness, it's been trash for me. I CONSTANTLY have to raise it in dark rooms and lower it in bright rooms. AKA, I might as well turn it off because I'm manually adjusting it every time anyway.
All in all, it's terrible.
Hobox10 said:
Ever since Google thought they knew better than everyone else and got rid of auto brightness for adaptive brightness, it's been trash for me. I CONSTANTLY have to raise it in dark rooms and lower it in bright rooms. AKA, I might as well turn it off because I'm manually adjusting it every time anyway.
All in all, it's terrible.
Click to expand...
Click to collapse
You know Adaptive Brightness is a mix of manual and auto brightness right? I remember auto brightness actually having the issues you're describing because there was no way to adjust it if it was set. If you have Adaptive Brightness on high enough, it should be bright enough in dark and bright situations. I believe people's issues are that it adjusts too often or the opposite, it's too dark in light rooms and too bright in dark rooms.
EeZeEpEe said:
You know Adaptive Brightness is a mix of manual and auto brightness right? I remember auto brightness actually having the issues you're describing because there was no way to adjust it if it was set. If you have Adaptive Brightness on high enough, it should be bright enough in dark and bright situations. I believe people's issues are that it adjusts too often or the opposite, it's too dark in light rooms and too bright in dark rooms.
Click to expand...
Click to collapse
Yeah I know it's supposed to be a mix somewhat. It's supposed to match the setting you set to whatever the surrounding brightness is relative to your brightness setting.
That's exactly WHY it's trash in my opinion though. It's a flawed methodology. I don't want it matching my setting relative to anything. I want it low in the dark and bright in bright rooms or the sun to be legible and not more. It tries to do some meet-you-in-the-middle garbage and it just doesn't work well.
Hobox10 said:
Yeah I know it's supposed to be a mix somewhat. It's supposed to match the setting you set to whatever the surrounding brightness is relative to your brightness setting.
That's exactly WHY it's trash in my opinion though. It's a flawed methodology. I don't want it matching my setting relative to anything. I want it low in the dark and bright in bright rooms or the sun. It tries to do some meet-you-in-the-middle garbage and it just doesn't work well.
Click to expand...
Click to collapse
I found the threshold for the lowest brightness in pitch dark with Adaptive Brightness on to be 29%. That should be dark enough in dark rooms and outdoors it's readable to me. What percentages have you been trying?
Mines doing the same thing. Did anyone work out whether it was hardware?
I used a sensor app to see what light was reporting, and it was stable. I can only assume it's a bug.
For those who aren't sure - if the screen is on, and not moving, without any changes to ambient or direct light, every 20 or so seconds the screen will dim to a warmer colour, and then 20 seconds later will brighten to a whiter colour.
superbestfriends said:
Mines doing the same thing. Did anyone work out whether it was hardware?
I used a sensor app to see what light was reporting, and it was stable. I can only assume it's a bug.
For those who aren't sure - if the screen is on, and not moving, without any changes to ambient or direct light, every 20 or so seconds the screen will dim to a warmer colour, and then 20 seconds later will brighten to a whiter colour.
Click to expand...
Click to collapse
Yeah I had a feeling that's what people might be experiencing.
To add on to this thread, this is also occuring on my gen 1 Pixel.
Ever since I upgraded to 8.1 the adaptive display will brighten/darken while the phone is sitting still in a constantly lit room.
I also appear to have lost much of the granularity in the brightness selecting bar. The first 25% or so is as dim as it goes, and only after that does it begin to alter the brightness. Previously it would begin around 10% on the bar.
Additionally, the logic behind adaptive brightness seems to have gotten worse. I previously left my brightness setting always in the same place, and no matter where I was it was either dim enough (at night) or bright enough (during the day).
Real unhappy with this update.

Question Adaptive Brightness - Disable maximized "Sunlight Mode"?

Hello!
I bought a Base S22 a few weeks ago and so far, I'm loving this device. But one thing that bothers me is the adaptive brightness implementation from Samsung, because its not really "adaptive". Even on some cloudy days, the brightness gets maximized and I can not change it to a lower level, because I always get the "maximized for best viewing in bright light" notification. In all other scenarios the adaptive brightness algorithm works perfectly.
Is there a way to disable this kind of behavior?
My current solution for sunny days is a Bixby routine to quickly disable adaptive brightness when I'm longer outside to save some battery.
Use manual brightness control. Adaptive brightness never worked right... no surprise it still doesn't.
You can manually lower the brightness even in adaptive mode, and hopefully it will adapt to you too.
Another options are:
- Battery Saving mode has optional "10% lower brightness "
– Battery Guardian module of Good Lock (with dependencies!) may be configured to lower brightness when phone's temperature is high
MakaanPL said:
You can manually lower the brightness even in adaptive mode, and hopefully it will adapt to you too.
Click to expand...
Click to collapse
That never works right either... The only draw back to full manual is finding the slider in bright light to jack it up. Auto is easier to temporarily use then. That said using the device in direct sunlight should be limited to seconds not minutes. Avoid whenever possible.
50% or less is best for battery and AMOLED conservation.
Using manual brightness control saves battery, display and your retinas
MakaanPL said:
You can manually lower the brightness even in adaptive mode, and hopefully it will adapt to you too.
Another options are:
- Battery Saving mode has optional "10% lower brightness "
– Battery Guardian module of Good Lock (with dependencies!) may be configured to lower brightness when phone's temperature is high
Click to expand...
Click to collapse
The problem is that the phone puts the brightness to the maximum and locks it there in bright light. Even when I use battery saving to lower the brightness by about 10%, it doesn't let me change the brightness to a lower level.
I don't know if this is just a thing on Samsung phones, because I heard that they use the adaptive brightness algorithm with KI from Google.
Mayamos said:
The problem is that the phone puts the brightness to the maximum and locks it there in bright light. Even when I use battery saving to lower the brightness by about 10%, it doesn't let me change the brightness to a lower level.
I don't know if this is just a thing on Samsung phones, because I heard that they use the adaptive brightness algorithm with KI from Google.
Click to expand...
Click to collapse
Which is why I use full manual control almost always. Invariably auto is many time too bright and has a tendency to "jump" around. Lol, human vision in much more adaptable and its nearly seamless.
The brightest stars burn the quickest... my plan is to have a display that's perfect for the life of my heavily used devices which likely will be in excess of 4+ years. Batteries are easy and cheap to replace, the displays aren't. Samsung's plan is to sell you a new phone every year.

Categories

Resources