UPDATE: https://mega.nz/#!G0sUgLYQ!FLkCzuu_9MjGXuxQAZ3sGIZEGVTZLsy48v92NSZiaWQ
^^^Modem & Non-Hlos in a zip file. Extract and flash what you need.^^^
Non-Hlos <<<(need to be on [OH3] MATCHING Bootloader!)
FOR MDL BOOTLOADER FLASH ONLY THE MODEM.BIN (NOT NON-HLOS)
Everythings working, sound, calling, LTE, Wifi etc.
Steps I took in case anyone needs it: have latest samsung drivers, open odin (I used 3.04). Untick auto reboot, POWER OFF PHONE dont use reboot menu because files wont always flash correctly. Hold power + vol down to boot to download, make sure it shows up in odin. Click PDA navigate to modem.bin (if its not showing up enter ** into file name field and hit enter....poof its there) now flash it and wait until you see success. Unplug phone, Close/Reopen ODIN, Hold power to shut down, boot to download and repeat modem flash to make sure it sticks.
Make sure you have a backup of rom and current/older modem in case you want to switch it back or what not. Not a dev, just wanted to help out and give back to the community.
Thanks @shiamatsu for this thread http://forum.xda-developers.com/showthread.php?t=2544612 , no clue if sound would still be effected by non-hlos.bin on MDL
Thanks @dirkdigles for the heads up on non-hlos.bin.
(Quoted link in post #37 is for OK3 not OH3)
lordodin912 said:
https://mega.nz/#!3QAwDALL!YxOp6LsLSLlslt7WM56HKDWnako2LVxGkg6yIuDzohs
Everythings working, sound, calling, LTE etc.
Click to expand...
Click to collapse
Safe to flash on NK2?
dirkdigles said:
Safe to flash on NK2?
Click to expand...
Click to collapse
Yessir but you probably need non-hlos.bin as well
Delete
Delete
lordodin912 said:
Yessir. But you most likely need non-hlos.bin
Click to expand...
Click to collapse
Sorry if I was unclear in OP @dirkdigles
Delete
lordodin912 said:
Sorry if I was unclear in OP @dirkdigles
Click to expand...
Click to collapse
Yeah I'm on NK2 bootloader and NK2 modem. So I guess I'd need both as you say.
Thanks!
DELETED
Why the hell is everyone deleting their posts? Even if it was a dumb question or something, it'd be nice to know what not to ask.
HampTheToker said:
Why the hell is everyone deleting their posts? Even if it was a dumb question or something, it'd be nice to know what not to ask.
Click to expand...
Click to collapse
Mine were just stuff that should have been put in OP, so I moved it.
While this allows one to update to the latest baseband, does it address the stagefright fix or is the entire firmware flash needed?
Thanks,
romer_99
romer_99 said:
While this allows one to update to the latest baseband, does it address the stagefright fix or is the entire firmware flash needed?
Thanks,
romer_99
Click to expand...
Click to collapse
The entire firmware is needed. But it's a moot point if you're running a custom ROM; once you reflash your custom ROM, you're at risk if your devices dev hasn't patched the ROM.
Sent from my SGH-M919 using XDA Free mobile app
Anyone notice any signal improvements with this radio?
Sent from my GT-I9505G using Tapatalk
dirkdigles said:
Anyone notice any signal improvements with this radio?
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
It might be better or its just a placebo effect, mine seems more stable. Really need to try it in your area for yourself and see, too many different configs for this phone to be sure for everyone.
I was able to flash the modem.bin just fine. However, I'm on the NK2 bootloader, and I can't get the non-hlos.bin file to work. I've used Odin 3.04, 3.07 and 3.09, and I get a Pass message every time. According to the Phone info app, I'm still on The NK2 bootloader. I used the phone slot for the non-hlos.bin file. Has anyone else had this problem?
EMcTx said:
I was able to flash the modem.bin just fine. However, I'm on the NK2 bootloader, and I can't get the non-hlos.bin file to work. I've used Odin 3.04, 3.07 and 3.09, and I get a Pass message every time. According to the Phone info app, I'm still on The NK2 bootloader. I used the phone slot for the non-hlos.bin file. Has anyone else had this problem?
Click to expand...
Click to collapse
Its probably easier for EVERYONE not on MDL to just update with odin official firmware, then odin TWRP or whatever recovery and restore the backup you should've made. No need to re-root or what not. This post was mainly for MDL.
EMcTx said:
I was able to flash the modem.bin just fine. However, I'm on the NK2 bootloader, and I can't get the non-hlos.bin file to work. I've used Odin 3.04, 3.07 and 3.09, and I get a Pass message every time. According to the Phone info app, I'm still on The NK2 bootloader. I used the phone slot for the non-hlos.bin file. Has anyone else had this problem?
Click to expand...
Click to collapse
You can't flash non-hlos.bin on a bootloader that doesn't match. You gotta take the original TAR and do something like this guy did
http://forum.xda-developers.com/showthread.php?t=2357171
C
Sent from my draconis using Tapatalk
What is the most recent bootloader? I upgraded to the knox one already and was using NB4 non-hlos and modem.
I tested out the FOH3 non-hlos and modem and so far it seems to be working with whatever bootloader I have.
Related
Hey guys i got a phone that wont boot up, the inital issue was there was no baseband, so i tired to flash via ODIN the stock image onto the phone, it fails at the modem part. I've looked through a few threads and i think the PIT file might help me; but i cannot for the life of me find the pit file. Does anyone have the Note 2 pit file they can share?
thanks
eric303 said:
Hey guys i got a phone that wont boot up, the inital issue was there was no baseband, so i tired to flash via ODIN the stock image onto the phone, it fails at the modem part. I've looked through a few threads and i think the PIT file might help me; but i cannot for the life of me find the pit file. Does anyone have the Note 2 pit file they can share?
thanks
Click to expand...
Click to collapse
Does the phone boot and if so have you rooted. Have you tried flashing the modem thru recovery. http://forum.xda-developers.com/showthread.php?t=1916936 I couldn't get link to go to page 1 sorry... This wont help you personally but maybe someone with some time (more than me) could make a .pit for you. If not ill look at it tomorrow
Sent from my SGH-T889 using Tapatalk 4 Beta
deeznutz1977 said:
Does the phone boot and if so have you rooted. Have you tried flashing the modem thru recovery. http://forum.xda-developers.com/showthread.php?t=1916936 I couldn't get link to go to page 1 sorry... This wont help you personally but maybe someone with some time (more than me) could make a .pit for you. If not ill look at it tomorrow
Sent from my SGH-T889 using Tapatalk 4 Beta
Click to expand...
Click to collapse
the phone does not boot, and i do not have root. I have not tried flashing the modem through recovery as i dont have a custom recovery on there or a modem.zip
Update - so i was able to get the phone to boot up, installed root and TWRP, installed the note 2 modem but still baseband unknown. From i can understand so far is that its a Tmobile note2, my idiot friend tried to flash the n7100 SW on it, now its showing unknown baseband/IMEI. Is there a fix for this?
truwrxtacy said:
the phone does not boot, and i do not have root. I have not tried flashing the modem through recovery as i dont have a custom recovery on there or a modem.zip
Update - so i was able to get the phone to boot up, installed root and TWRP, installed the note 2 modem but still baseband unknown. From i can understand so far is that its a Tmobile note2, my idiot friend tried to flash the n7100 SW on it, now its showing unknown baseband/IMEI. Is there a fix for this?
Click to expand...
Click to collapse
try to flash via recovery some modems and do factory reset
someone has a thread with all modems
What version of ODIN were you using? Some earlier versions have issues w/ the modem part of newer phones... just a thought.
dwitherell said:
What version of ODIN were you using? Some earlier versions have issues w/ the modem part of newer phones... just a thought.
Click to expand...
Click to collapse
Good point dwith , i use 3.07
How did you?
truwrxtacy said:
the phone does not boot, and i do not have root. I have not tried flashing the modem through recovery as i dont have a custom recovery on there or a modem.zip
Update - so i was able to get the phone to boot up, installed root and TWRP, installed the note 2 modem but still baseband unknown. From i can understand so far is that its a Tmobile note2, my idiot friend tried to flash the n7100 SW on it, now its showing unknown baseband/IMEI. Is there a fix for this?
Click to expand...
Click to collapse
I have exact same error, but also mine wont enter recovery mode, only download mode.
Kind to share how you recovered your phone ?
dannyogolo said:
I have exact same error, but also mine wont enter recovery mode, only download mode.
Kind to share how you recovered your phone ?
Click to expand...
Click to collapse
Have you tried Kies? That has been reported to work for recovering from Loss of imei and partitioning by at least one person around here.
Hastily spouted for your befuddlement
wrong post sorry
hi may i know how to find a pit file for my note2
deeznutz1977 said:
Does the phone boot and if so have you rooted. Have you tried flashing the modem thru recovery. http://forum.xda-developers.com/showthread.php?t=1916936 I couldn't get link to go to page 1 sorry... This wont help you personally but maybe someone with some time (more than me) could make a .pit for you. If not ill look at it tomorrow
Sent from my SGH-T889 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I have note 2 but how to find the pit file, mine is active note2 korean version
Here's the MODEM+NON-HLOS (both together and as separate files), Bootloader, Kernel, CSC, and Recovery I extracted from the new NF9 firmware release.
IF YOU NEED NE6 FIRMWARE, GO HERE: http://forum.xda-developers.com/not...900tuvudne6-extracted-stock-firmware-t2846074
IF YOU NEED NF1 FIRMWARE, GO HERE: http://forum.xda-developers.com/showthread.php?t=2789932
IF YOU NEED NF4 FIRMWARE, GO HERE: http://forum.xda-developers.com/not...900tuvudnf4-extracted-stock-firmware-t2834398
Bootloader: http://www.mediafire.com/download/kb333bcrk230j7y/N900TUVUDNF9_BL.tar.md5
CSC: http://www.mediafire.com/download/a8k1h63nhj3mqxz/N900TUVUDNF9_CSC.tar.md5
Kernel: http://www.mediafire.com/download/aufmjb1nmnjh379/N900TUVUDNF9_KERNEL.tar.md5
Modem + NON-HLOS (Combined): http://www.mediafire.com/download/dyg4tmo2az0me4r/N900TUVUDNF9_MODEM+NON_HLOS.tar.md5
modem.bin: http://www.mediafire.com/download/8mi348aoc6p1q8n/modem.bin
NON-HLOS.bin: http://www.mediafire.com/download/z89z5fd0ylm38ln/NON-HLOS.bin
Recovery: http://www.mediafire.com/download/7ae5hp3dzsywy9q/N900TUVUDNF9_RECOVERY.tar.md5
Full Stock Image N900TUVUDNF9: http://www.mediafire.com/download/s...VUDNF9_N900TTMBDNF9_N900TUVUDNF9_HOME.tar.md5
For Kernel Builders, Samsung has released the source code here: http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=N900T
If you have trouble getting the bootloader and/or Modem to stick, install "Triangle Away" by @Chainfire and follow the directions to reset your counter (even if it says zero), then boot into download mode, and re-flash them with Odin and they should stick.
To verify, you can download "Phone Info - Samsung" and make sure that all 4 items say NF9 (Bootloader, Baseband, PDA and CSC).
Triangle Away by @Chainfire: https://play.google.com/store/apps/details?id=eu.chainfire.triangleaway
Phone INFO ★Samsung★ by @vndnguyen: https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Mobile Odin Pro: https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro
For general discussion about NF9 - @Megaflop666 started a thread HERE
Enjoy, and as always, slap that Thanks button!
toastido said:
Here's the MODEM+NON-HLOS (both together and as separate files), Bootloader, Kernel, CSC, and Recovery I extracted from the new NF9 firmware release.
IF YOU NEED NE6 FIRMWARE, GO HERE: http://forum.xda-developers.com/not...900tuvudne6-extracted-stock-firmware-t2846074
IF YOU NEED NF1 FIRMWARE, GO HERE: http://forum.xda-developers.com/showthread.php?t=2789932
IF YOU NEED NF4 FIRMWARE, GO HERE: http://forum.xda-developers.com/not...900tuvudnf4-extracted-stock-firmware-t2834398
Bootloader: http://www.mediafire.com/download/kb333bcrk230j7y/N900TUVUDNF9_BL.tar.md5
CSC: http://www.mediafire.com/download/a8k1h63nhj3mqxz/N900TUVUDNF9_CSC.tar.md5
Kernel: http://www.mediafire.com/download/aufmjb1nmnjh379/N900TUVUDNF9_KERNEL.tar.md5
Modem + NON-HLOS (Combined): http://www.mediafire.com/download/dyg4tmo2az0me4r/N900TUVUDNF9_MODEM+NON_HLOS.tar.md5
modem.bin: PENDING
NON-HLOS.bin: http://www.mediafire.com/download/z89z5fd0ylm38ln/NON-HLOS.bin
Recovery: http://www.mediafire.com/download/7ae5hp3dzsywy9q/N900TUVUDNF9_RECOVERY.tar.md5
Full Stock Image N900TUVUDNF9: PENDING
For Kernel Builders, Samsung has NOT released the source code yet.
If you have trouble getting the bootloader and/or Modem to stick, install "Triangle Away" by @Chainfire and follow the directions to reset your counter (even if it says zero), then boot into download mode, and re-flash them with Odin and they should stick.
To verify, you can download "Phone Info - Samsung" and make sure that all 4 items say NF9 (Bootloader, Baseband, PDA and CSC).
Triangle Away by @Chainfire: https://play.google.com/store/apps/details?id=eu.chainfire.triangleaway
Phone INFO ★Samsung★ by @vndnguyen: https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Mobile Odin Pro: https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro
For general discussion about NF9 - @Megaflop666 started a thread HERE
Enjoy, and as always, slap that Thanks button!
Click to expand...
Click to collapse
Thanks for doing this each time!
effortless said:
Thanks for doing this each time!
Click to expand...
Click to collapse
NP. I need them so why just download and extract it for myself, and not share them?
toastido said:
NP. I need them so why just download and extract it for myself, and not share them?
Click to expand...
Click to collapse
Awesome thanks @toastido [emoji106][emoji106]
Sent from my bad ass Kryon infused TWEAKED..Note 3
Updated - modem.bin and full image completed.
how do I update the modem without odin the full file? do I just odin the modem.bin file?
Thanks. Are there any major updates in this other than Wifi calling improvements?
Any idea why after I flash the CSC file, with Phone INFO app, it shows as N900TTMBDNF9 and not N900TUVUDNF9 like the firmware?
Nvm
What is NON-HLOS? Is this something that should be flashed with the modem?
Scartaris12 said:
What is NON-HLOS? Is this something that should be flashed with the modem?
Click to expand...
Click to collapse
you can just odin flash the one with both of those files combine. its a lot easier than doing both of them separately
@toastido Instead of having people use Triangle away, just tell them they need to boot into Download mode after having the phone turned completely off. If you boot into download mode using an app or using CM's reboot option, the modem will not stick. If you boot into download mode using the button combination the modem will stick.
Thanks for breaking out the full tar...I love to update the modem but nothing else.
idtheftvictim said:
@toastido Instead of having people use Triangle away, just tell them they need to boot into Download mode after having the phone turned completely off. If you boot into download mode using an app or using CM's reboot option, the modem will not stick. If you boot into download mode using the button combination the modem will stick.
Thanks for breaking out the full tar...I love to update the modem but nothing else.
Click to expand...
Click to collapse
I've tried doing it both ways and nothing works, I'm still stuck on NF4.
Methinks I'm going to have to odin the full package
@toastido wow that was fast and thank you again! Slapped your Thanks button a few times along the way to this post
kabuk1 said:
I've tried doing it both ways and nothing works, I'm still stuck on NF4.
Methinks I'm going to have to odin the full package
Click to expand...
Click to collapse
Try taking batter completely out, and then using button combination to get into download mode. It has worked flawlessly for MANY others including myself.
imaleecher said:
Any idea why after I flash the CSC file, with Phone INFO app, it shows as N900TTMBDNF9 and not N900TUVUDNF9 like the firmware?
Click to expand...
Click to collapse
Because the CSC contains the "CSC Code" which is TMB.
idtheftvictim said:
@toastido Instead of having people use Triangle away, just tell them they need to boot into Download mode after having the phone turned completely off. If you boot into download mode using an app or using CM's reboot option, the modem will not stick. If you boot into download mode using the button combination the modem will stick.
Thanks for breaking out the full tar...I love to update the modem but nothing else.
Click to expand...
Click to collapse
The reason is that I've not had luck with any other way, and those who have done it with TA (and followed TA's directions) have reported success. I had NE6 not want to update for me until I did TA method. Powered down, battery pull, power up into ODIN mode, flashed in CP, still wouldn't take. I installed and ran TA, following the directions, and when it was finished, the modem stuck like a champ. Obviously YMMV, but I had to reset the flash counter first.
Scartaris12 said:
What is NON-HLOS? Is this something that should be flashed with the modem?
Click to expand...
Click to collapse
I flashed the Non-Hlos Modem via Odin V3.07. Put the file in the PDA section but the baseband version still shows as NF1.
Any suggestions?
This has been covered so many times take a couple mins and read the other threads.
Here some help this is how i do it flash the stock kernel that work with your firmware then run triangle away let it do its thing then when it ask to reboot once its finished select download mode then flash the modem
toastido said:
The reason is that I've not had luck with any other way, and those who have done it with TA (and followed TA's directions) have reported success. I had NE6 not want to update for me until I did TA method. Powered down, battery pull, power up into ODIN mode, flashed in CP, still wouldn't take. I installed and ran TA, following the directions, and when it was finished, the modem stuck like a champ. Obviously YMMV, but I had to reset the flash counter first.
Click to expand...
Click to collapse
Thanks for the explanation. I've never had any issues with getting a modem to stick when doing it this way...i guess this is truly a YMMV situation. :good:
Stock 4.4.4 FNI3 Galaxy S4 M919N/JflteMetroPCS
Stock
Rooted
BusyBox
Knoxless
CIQLess
Deodexed
ArchiInit'd support
(software level init'd support. Doesnt conflict with kernel level support found in custom kernels)
ro.secure.storage set to false
Everything else completely untouched.
DOWNLOAD HERE
Stock FNI3 kernel set to permissive
DOWNLOAD HERE
Modems
Modem.bin
NON-HLOS.bin
Modem.bin And NON-HLOS.bin
Stock Firmware
HERE
Odin 3.09
HERE
Issues
Shouldn't be any.
XDA:DevDB Information
MetroPCS 4.4.4 FNI3 Galaxy S4 Rooted_Deodex'd_Knoxless, ROM for the T-Mobile Samsung Galaxy S 4
Contributors
ShinySide
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2014-10-19
Last Updated 2014-10-19
No first's. ???
Pp.
Is the "Mobile hotspot" and "data" on the Notification panel (when you swipe your finger from the top of the phone) ???
Or is it the same as the Tmobile version, Mobile hotspot is on a separate app in the app drawer, and mobile data can only be accessed under settings menu?
Thanks
xdm9mm said:
Is the "Mobile hotspot" and "data" on the Notification panel (when you swipe your finger from the top of the phone) ???
Or is it the same as the Tmobile version, Mobile hotspot is on a separate app in the app drawer, and mobile data can only be accessed under settings menu?
Thanks
Click to expand...
Click to collapse
No. But can be easily added to both.
Much thanks!!!That was fast!
http://www.youtube.com/watch?v=4e-TXWIf_DE
Now how about you upload HispAsian v4?
ShinySide said:
No. But can be easily added to both.
Click to expand...
Click to collapse
thanks.. will try it later
everything seemed to work, but after flashing the Modem.bin And NON-HLOS.bin I no longer have any sound. Anyone else having a similar issue? I think it was really the non-hlos.bin that screwed things up. Any way to undo what it did? Any help would be appreciated, thanks.
arocker said:
Much thanks!!!That was fast!
http://www.youtube.com/watch?v=4e-TXWIf_DE
Now how about you upload HispAsian v4?
Click to expand...
Click to collapse
Haha tomorrow or Saturday. Drove 400 and something miles today for work and last thing I'm doing is sitting down and messing with Android stuff
Caloba said:
everything seemed to work, but after flashing the Modem.bin And NON-HLOS.bin I no longer have any sound. Anyone else having a similar issue? I think it was really the non-hlos.bin that screwed things up. Any way to undo what it did? Any help would be appreciated, thanks.
Click to expand...
Click to collapse
The nonhlos.bin version must match the bootloader version. For example, if you have the NB7 bootloader, you need to have the NB7 nonhlos.bin. Flash the proper nonhlos.bin.
arocker said:
The nonhlos.bin version must match the bootloader version. For example, if you have the NB7 bootloader, you need to have the NB7 nonhlos.bin. Flash the proper nonhlos.bin.
Click to expand...
Click to collapse
Thanks for the reply. How can I find out what bootloader I have? I pretty much had rooted my MetroPCS S4 shortly after I bought it back in July of 2013. It was still using Jelly bean 4.2.2. with older firmware M919NUVUAMF2. I hope that info helps. Would I need to find a different nonhlos.bin file or update/upgrade my bootloader? I'm really SOL right now cuz I can't make phone calls. At least I can still recieve texts. Thanks again for any help?
Caloba said:
Thanks for the reply. How can I find out what bootloader I have? I pretty much had rooted my MetroPCS S4 shortly after I bought it back in July of 2013. It was still using Jelly bean 4.2.2. with older firmware M919NUVUAMF2. I hope that info helps. Would I need to find a different nonhlos.bin file or update/upgrade my bootloader? I'm really SOL right now cuz I can't make phone calls. At least I can still recieve texts. Thanks again for any help?
Click to expand...
Click to collapse
July of 2013 means your warranty is up so tripping knox would be no issue. I'd completely update with the firmware then you can not worry about stupid mix match problems
ShinySide said:
July of 2013 means your warranty is up so tripping knox would be no issue. I'd completely update with the firmware then you can not worry about stupid mix match problems
Click to expand...
Click to collapse
One last question. I just download the huge M919NUVUFNI3_M919NTMBFNI3_M919NUVUFNI3_HOME.tar.md5 stock firmware file. In which slot do I put that in? I'm using Odin 3.09. The slots are labled: PIT, BL, AP, CP and CSC. Thanks again.
Caloba said:
One last question. I just download the huge M919NUVUFNI3_M919NTMBFNI3_M919NUVUFNI3_HOME.tar.md5 stock firmware file. In which slot do I put that in? I'm using Odin 3.09. The slots are labled: PIT, BL, AP, CP and CSC. Thanks again.
Click to expand...
Click to collapse
AP. Uncheck auto reboot, flash it, when done pull battery, back to download mode and flash it again and reboot. Just to be 100. Sometimes bootloader and/or modems have a issue writing to the device.
Caloba said:
Thanks for the reply. How can I find out what bootloader I have? I pretty much had rooted my MetroPCS S4 shortly after I bought it back in July of 2013. It was still using Jelly bean 4.2.2. with older firmware M919NUVUAMF2. I hope that info helps. Would I need to find a different nonhlos.bin file or update/upgrade my bootloader? I'm really SOL right now cuz I can't make phone calls. At least I can still recieve texts. Thanks again for any help?
Click to expand...
Click to collapse
Edit: Looks like you're flashing the firmware...good choice.
If you've never flashed a different firmware then you would need the nonhlos.bin from the MF2 firmware. You can find that firmware at this link, under firmware...
http://androidforums.com/metropcs-g...cial-metropcs-s4-root-information-thread.html
Alternately you could just flash the new NI3 firmware like shiny suggested. It would be easier altogether. Your manufacturer warranty has expired so updating the bootloader is no longer an issue.
arocker said:
Edit: Looks like your flashing the firmware...good choice.
If you've never flashed a different firmware then you would need the nonhlos.bin from the MF2 firmware. You can find that firmware at this link, under firmware...
http://androidforums.com/metropcs-g...cial-metropcs-s4-root-information-thread.html
Alternately you could just flash the new NI3 firmware like shiny suggested. It would be easier altogether. Your manufacturer warranty has expired so updating the bootloader is no longer an issue.
Click to expand...
Click to collapse
Everything went off smoothly, thanks guys. I'm now on the latest stock MetroPCS 4.4.4 firmware.
http://download.chainfire.eu/328/CF-Root/CF-Auto-Root/CF-Auto-Root-jfltetmo-jfltetmo-sghm919.zip
arocker said:
http://download.chainfire.eu/328/CF-Root/CF-Auto-Root/CF-Auto-Root-jfltetmo-jfltetmo-sghm919.zip
Click to expand...
Click to collapse
Thanks again Arocker, worked like a charm, I'm rooted.
You are welcome
WWould I be able to use Mobil Odin pro to flash this....
laseroxstar said:
WWould I be able to use Mobil Odin pro to flash this....
Click to expand...
Click to collapse
The firmware? No. Mobile odin doesn't flash bootloaders.
Modems should be able to yet I've never used it
Ok i know there are some threads or posts that are trying to solve this problem, or they already solved this problem but i cannot find a real solution for my phone. When i flash the latest built DOl1 with odin i get stuck on Samsung Logo. I can pass that when i flash a custom kernel, but i just want my phone to be fully stock.
So i have extracted .tar.md5 and than i have compressed .tar on Linux all the files excluding cache.img. Because it seems that cache.img is causing the firmware from booting after flashing with odin. But without cache.img i missed some features like: keyboard word suggestion and some other things and i feel that the phone is not working as it should, it always have problems.
i have done tons of test yesterday by spliting the tarball into two packages bl.tar and ap.tar but still nothing. Even when i flash separatly cache.img or boot.img i get stuck.
Is there any solution for these ? Does anybody know anything ?
What version of Odin are you using? And where did you down the tar?
Sent from my SM-G925T using Tapatalk
Was your phone rooted? Flash the unikernel and it will boot.
nappent said:
What version of Odin are you using? And where did you down the tar?
Sent from my SM-G925T using Tapatalk
Click to expand...
Click to collapse
Iv used odin 3.10.6 and 3.10.7 both of em. The tar is downloaded from sammobile and samsung-firmwares just tried out two different sites
atinder said:
Was your phone rooted? Flash the unikernel and it will boot.
Click to expand...
Click to collapse
I know it will boot with a costum kernel. I just want it all the way stock. Thank you anyway
I just recently flashed back to stock DOI1 in preperation for JUMPing to the note 5 and I've had no problems. I used ODIN 3.10.7 and the tar that @Alex9090 posted in another thread. Maybe try that one and see if it works.
It's weird that it'll only boot with a custom kernel though. I was on UniKernel v9 and flashed stock without issue.
caspernetherlands said:
I know it will boot with a costum kernel. I just want it all the way stock. Thank you anyway
Click to expand...
Click to collapse
Please make sure you have oem unlocking on before flashing anything. I have paper weight with me because of that
atinder said:
Please make sure you have oem unlocking on before flashing anything. I have paper weight with me because of that
Click to expand...
Click to collapse
Yes sir OEM Unlocking is on
caspernetherlands said:
Yes sir OEM Unlocking is on
Click to expand...
Click to collapse
are you stuck on samsung boot logo? i am unploading custom ap and bl. if you know how to compile its easier as uploading will take time.
C:\windows\system32>cd c:\users\atinder\desktop\tartool
c:\Users\Atinder\Desktop\tartool>cd bin
//copy files to folder for eg - cm.bin and sboot.bin to pack as Bl.tar
//order entered would be the order they are being flashed
c:\Users\Atinder\Desktop\tartool\bin>tar -H ustar -c cm.bin sboot.bin > BL.tar
//copy files to folder eg - boot.img system.img to AP.tar
//order entered would be order they are being flashed
c:\Users\Atinder\Desktop\tartool\bin>tar -H ustar -c boot.img system.img > AP.tar
c:\Users\Atinder\Desktop\tartool\bin>
atinder said:
Please make sure you have oem unlocking on before flashing anything. I have paper weight with me because of that
Click to expand...
Click to collapse
can you unlock the bootloader/ oem unlocking in any other ways without booting up system such as adb, odin, download mode?
Install recovery and wipe all and then installs DOI1
Mirror Link to N910TUVU2DOK2_N910TTMB2DOK2_TMB [FULL STOCK ROM]
Also: BOOTLOADER & MODEM
---Downloads---
Full Untouched ROM from Sammobile
Mega: https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Bootloader file:
Android File Host: https://www.androidfilehost.com/?fid=24269982087008410
Mega: https://mega.nz/#!atYXVJQI!KSMHRMcH4qPgoP7sxSWM0ihNMOU-eQwYISaimam5tdk
Modem file:
Android File Host: https://www.androidfilehost.com/?fid=24269982087008409
Mega: https://mega.nz/#!vlQ2VILY!NFCASlvP7Rf5kB3d2eN2sy3MC_3SLmQ945dRKB1nfzU
User: @eduardog131 provided links just to the modem and bootloader in a later post in this thread. I am simply providing the link in the OP Thanks!
OK so do we use odin
Thanks. Will we be able to root and custom recovery?
lilila said:
Thanks. Will we be able to root and custom recovery?
Click to expand...
Click to collapse
You should be able to ODIN flash TWRP then you will need to flash a custom kernel to get root, and flash Superuser.
I have not tried it yet though, so I have not verified if it works or not.
I tried flash clean rom via odin, fully bootup, reboot to download, installed TWRP recovery, then flashed superuser.zip. Bootloop.
There was this other article on the net about the 910C saying they got 5.1.1 but you have to flash back your booloader to 5.0.1.
Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.
poontab said:
Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.
Click to expand...
Click to collapse
Did it work?
poontab said:
Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.
Click to expand...
Click to collapse
Do you have a link for beastmode?
Rollablunt420 said:
Did it work?
Click to expand...
Click to collapse
Dunno. Left laptop at work but should since it's not enforcing. I'll know in a few hours.
sdaelr said:
Do you have a link for beastmode?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3238775
Alternatively AEL or other non enforcing 5.1.1 compatible kernel are needed for Samsung lollipop 5.1 or greater with root.
poontab said:
Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.
Click to expand...
Click to collapse
Yes, it works for me.
来自我的 SM-N910T 上的 Tapatalk
Ripped the BL/CP parts straight from the firmware.
Since I assume none of you want to exactly download a 1.84GB file for just a bootloader and modem upgrade (why would you go back to stock), here are the BL/CP parts!
-
[Update: 13-1-16: PIT file now available to recover from a bad brick]
[DO NOT USE UNLESS YOU NEED TO REPARTITION YOUR PARTITION TABLE, OR YOU'RE IN A BAD BRICK.]
https://www.androidfilehost.com/?fid=24369303960684492
INSTALLING THESE FILES
1. Load phone in download mode. (Vol down+Home+Power)
2. Open ODIN3 on your computer. (Make sure the Samsung drivers are installed.)
3. Load the booloader file in BL.
3a. Load the modem file in CP.
4. Hit the start button, and let the files flash.
5. If there are no error messages in the log portion of ODIN3, then you have successfully flashed and upgraded to the 5.1.1 bootloader.
NOTE: At this time, you CANNOT downgrade from the 5.1.1 bootloader, so take caution.
---Downloads:
Bootloader file:https://www.androidfilehost.com/?fid=24269982087008410
Modem file:https://www.androidfilehost.com/?fid=24269982087008409
eduardog131 said:
Ripped the BL/CP parts straight from the firmware.
Since I assume none of you want to exactly download a 1.84GB file for just a bootloader and modem upgrade (why would you go back to stock), here are the BL/CP parts!
-
INSTALLING THESE FILES
1. Load phone in download mode. (Vol down+Home+Power)
2. Open ODIN3 on your computer. (Make sure the Samsung drivers are installed.)
3. Load the booloader file in BL.
3a. Load the modem file in CP.
4. Hit the start button, and let the files flash.
5. If there are no error messages in the log portion of ODIN3, then you have successfully flashed and upgraded to the 5.1.1 bootloader.
NOTE: At this time, it is unknown if you can downgrade from the 5.1.1 bootloader, so take caution.
---Downloads:
Bootloader file:https://www.androidfilehost.com/?fid=24269982087008410
Modem file:https://www.androidfilehost.com/?fid=24269982087008409
Click to expand...
Click to collapse
Pretty cool... Can you please do the same for the T3 version?
domhall said:
Pretty cool... Can you please do the same for the T3 version?
Click to expand...
Click to collapse
Sure, when I get time at home. (That is, unless someone beats me.)
~~
Razgriz said:
DOK2 is for both versions of the TMo Note 4.
Click to expand...
Click to collapse
T3 isn't interchangeable with T firmware.
I'm gonna go on the limb here, I'm 50% certain you can't go back to COG2... Be very cautious... When I Odin'ed DOK2 the process seemed odd not sure why lol
Will say modem on DOK2 seems way more stable, I don't seem to have as many data drops, and me personally I could give two s**ts if I can go back to cog2..doesnt matter as you can still flash those roms, I'm on a DOK2 Bootloader and modem with a cog2 rom right now...by the way thanks for the bootloader and modem files man..lol..really didnt wanna go back to stock
Sent from my SM-N920T using xda app-developers app
manufan721 said:
Will say modem on DOK2 seems way more stable, I don't seem to have as many data drops, and me personally I could give two s**ts if I can go back to cog2..doesnt matter as you can still flash those roms, I'm on a DOK2 Bootloader and modem with a cog2 rom right now...by the way thanks for the bootloader and modem files man..lol..really didnt wanna go back to stock
Click to expand...
Click to collapse
Yeah, pretty much agree here. This new modem has given me a lot less data drops. I had really spotty HSPA, with it dropping so constantly. Tested it out during school today and it hasn't dropped.
-------
N910T3 BL+CP parts ripped! I also managed to acquire a PIT file for the T3...DO NOT LOAD THE PIT FILE INTO ODIN3! I HAVE IT IN CASE SOMEONE WHO HAS A SEVERE BRICK CAN USE IT!
Same instructions as before for flashing the BL+CP parts. Reference a few posts up.
Bootloader file:https://www.androidfilehost.com/?fid=24269982087009029
Modem file:https://www.androidfilehost.com/?fid=24269982087009028
PIT FILE (YOU HAVE BEEN WARNED! DO NOT LOAD UNLESS THERE IS A SEVERE BRICK.)https://www.androidfilehost.com/?fid=24269982087009027
Confirm once you load DKO2 BL you can't go back to COG2 BL
ALLDAT said:
Confirm once you load DKO2 BL you can't go back to COG2 BL
Click to expand...
Click to collapse
Lawdy.. lol how many threads have you asked this in. I answered this in another thread.