Related
I swear I have tried that hotfile link a million times. I want to unlock for T-Mobile and am having the worst luck. could someone help a brotha out?:highfive:
If your trying to unlock your I317, then you just have to downgrade your modem if your ROOTED.
The J2 original modem that came with the DEVICE when it was first released! Is what you'll need. Then after the unlock just update your modem to the latest release!
Because you have to DO it thru the recovery! I prefer twrp recovery...
Sent from my SAMSUNG-SGH-I317 using Tapatalk
I am running a cleanrom I believe that to be based on the international firmware ...are you sure simply flashing the modem will suffice? can anyone verify a rom and modem combo that the dialer code unlock method will work on?
I was running the 4.1.2 recent update, so I flashed the J2 modem and unlocked. Then I flashed Cleanrom 5.0 but still have the J2 modem. So yes, you can run Cleanrom with the 4.1.1 J2 modem.
My friend moved back to Pakistan from Canada recently and brought his phone back with him. Since the phone was purchased from Rogers, it was locked to Rogers network in Canada.
He brought it to Pakistan and had it unlocked for 10 USD at a store.
He isn't familiar with rooting and all so he didn't pay attention as to how the unlock was done and is not sure if it was a factory unlock or not.
He showed me his phone recently and I noticed they had rooted it.
He wants to update his phone to 4.3 Jellybean but he can't use OTA because his device status has been changed to 'Modified'.
If I download a 4.3 firmware for the I747M and flash it will the phone get locked again? On SamMobile, there is a firmware that shows Canda (Rogers) on one of the firmwares, if I download it and flash it will the phone get locked again or will it stay unlocked even though its being flashed with a Rogers firmware.
There is also another firmware with the Country/Carrier showing as 'Unknown' as SamMobile. If I flash this firmware, will the device get locked? What does 'Unknown' mean on a firmware?
Thanks
What OS is on the phone right now? If the phone is running 4.3, do not flash any stock firmware unless it is 4.3 or higher.
I don't think it makes a difference as to whether the phone was unlocked via rooting or code, it will remain unlocked after flashing.
I unlocked my Bell s3, as have many others, using a free method and the phone has remained unlocked, even though I reloaded a stock Bell 4.1.1 rom and then a stock Bell 4.1.2 rom.
audit13 said:
What OS is on the phone right now? If the phone is running 4.3, do not flash any stock firmware unless it is 4.3 or higher.
I don't think it makes a difference as to whether the phone was unlocked via rooting or code, it will remain unlocked after flashing.
I unlocked my Bell s3, as have many others, using a free method and the phone has remained unlocked, even though I reloaded a stock Bell 4.1.1 rom and then a stock Bell 4.1.2 rom.
Click to expand...
Click to collapse
It's on 4.1.1 right now. So if I flash a Rogers 4.3 firmware?
Sent from my Galaxy S III using Tapatalk
You can flash it but I would not do it. The 4.3 ROM will install Knox which can make rooting more difficult and harder to unbrick.
You can install a custom recovery and just flash a custom 4.4.2 ROM. This allows you to easily return to a stock ROM in the future.
Flashing a 4.4.2 ROM
audit13 said:
You can flash it but I would not do it. The 4.3 ROM will install Knox which can make rooting more difficult and harder to unbrick.
You can install a custom recovery and just flash a custom 4.4.2 ROM. This allows you to easily return to a stock ROM in the future.
Click to expand...
Click to collapse
My friend does want KitKat on his phone, so how do I flash a 4.4.2 ROM?
Can I flash the CWM Recovery meant for the I747? Will it make a difference if my device is the I747M?
Will I747 ROMs work on the I747M?
Thanks for the help BTW
You can flash Philz Touch Recovery via Odin. Once that is flashed correctly, you can download a ROM, save it on the phone's internal or external memory, boot into recovery, wipe Dalvik Cache, cache, and data. Then flash the rom and reboot.
audit13 said:
You can flash Philz Touch Recovery via Odin. Once that is flashed correctly, you can download a ROM, save it on the phone's internal or external memory, boot into recovery, wipe Dalvik Cache, cache, and data. Then flash the rom and reboot.
Click to expand...
Click to collapse
Could you suggest a KitKat ROM that looks like a Nexus device?
Thanks.
Sent from my Galaxy S III using Tapatalk
I just started flashing ROMs onto my s3 and prefer an aosp interface.
I don't know of any that look like stock kit Kat but you could use as theme chooser to find something you like.
I recommend that you not update to 4.3.
audit13 said:
I just started flashing ROMs onto my s3 and prefer an aosp interface.
I don't know of any that look like stock kit Kat but you could use as theme chooser to find something you like.
I recommend that you not update to 4.3.
Click to expand...
Click to collapse
I've decided against updating to 4.3 but I'm looking for an AOSP 4.4 KitKat ROM.
I tried Themer on my phone but didn't like it.
Sent from my Galaxy S III using Tapatalk
murtaza02 said:
I've decided against updating to 4.3 but I'm looking for an AOSP 4.4 KitKat ROM.
I tried Themer on my phone but didn't like it.
Sent from my Galaxy S III using Tapatalk
Click to expand...
Click to collapse
You can search for themes on the play store. Many of them require a certain launcher. When you find a theme you like, just download the required launcher and install the theme.
Were you able to load a custom rom onto the phone?
audit13 said:
You can search for themes on the play store. Many of them require a certain launcher. When you find a theme you like, just download the required launcher and install the theme.
Were you able to load a custom rom onto the phone?
Click to expand...
Click to collapse
I haven't tried yet since the phone is not with me.
To be honest, I've used 3-4 launchers from the Play Store but they still don't give the same experience as the Custom ROM.
Thanks
Every ROM uses some sort of launcher and certain themes only support certain launchers.
Personally, I like Cyanfox because of its dark UI.
Free Unlocking method
audit13 said:
I unlocked my Bell s3, as have many others, using a free method and the phone has remained unlocked, even though I reloaded a stock Bell 4.1.1 rom and then a stock Bell 4.1.2 rom.
Click to expand...
Click to collapse
Hi, I'm trying to unlock my Galaxy S3 I747M and I see that you were able to do so via a free method, now would that free method be via a survey, or a magazine deal or Netflix? I'm currently in Trinidad and it comes up with something like, Deals are not available in your country. I would like to use this phone while here on a work assignment so if you could please tell me how you were able to do this it would muchly be appreciated. Its on a Canadian carrier and with Rogers. Also on 4.1.2
draziw_1 said:
Hi, I'm trying to unlock my Galaxy S3 I747M and I see that you were able to do so via a free method, now would that free method be via a survey, or a magazine deal or Netflix? I'm currently in Trinidad and it comes up with something like, Deals are not available in your country. I would like to use this phone while here on a work assignment so if you could please tell me how you were able to do this it would muchly be appreciated. Its on a Canadian carrier and with Rogers. Also on 4.1.2
Click to expand...
Click to collapse
The free method is not any sort of offer from any company. In order to use the free method, you need to flash a stock Rogers 4.1.1 ROM via Odin 3.07 because a stock 4.1.1 ROM is the only ROM that has the necessary menu options to do it. If you flash a stock ROM, you will loose all of the data and apps on your phone.
The i747m is a Bell phone. I think Rogers is an i747r.
audit13 said:
The free method is not any sort of offer from any company. In order to use the free method, you need to flash a stock Rogers 4.1.1 ROM via Odin 3.07 because a stock 4.1.1 ROM is the only ROM that has the necessary menu options to do it. If you flash a stock ROM, you will loose all of the data and apps on your phone.
The i747m is a Bell phone. I think Rogers is an i747r.
Click to expand...
Click to collapse
No no.
I747M is Rogers and Bell.
I747U is for Telus.
Sent from my Galaxy S III using Tapatalk
murtaza02 said:
No no.
I747M is Rogers and Bell.
I747U is for Telus.
Sent from my Galaxy S III using Tapatalk
Click to expand...
Click to collapse
I stand corrected. Thanks for the information.
audit13 said:
I stand corrected. Thanks for the information.
Click to expand...
Click to collapse
No problem man.
I should be thanking you for all the help in this thread.
I guess this thread can be locked now.
Thanks again.
Sent from my Galaxy S III using Tapatalk
Just curious, did you install a custom ROM? As I mentioned before, avoid 4.3.
audit13 said:
Just curious, did you install a custom ROM? As I mentioned before, avoid 4.3.
Click to expand...
Click to collapse
Still not yet. Phone is still with a friend.
Will probably install a 4.4.2 ROM.
Sent from my Galaxy S III using Tapatalk
WARNING!!!!
Do not flash a 4.4.2 modem if you are running 4.3 firmware (bootloaders)!!!!
This will cause a permanent hard-brick!!! There is no fix!!!
The only reason anyone should need to flash one of these is if they had flashed a 4.3 or earlier modem for whatever reason. Once updated to 4.4.2 firmware, ONLY that matching modem will work. Flashing anything else will result in no signal and most likely an "Unknown" baseband and IMEI. If you flashed an older modem, you will need to flash back to the 4.4.2 one and these will all come back.
This has happened a number of times already, and continues to happen still. So I figured I would put them in a separate thread to make them easier to find.
Flash from the recovery of your choice, or Mobile Odin. The updater-script for these includes an assert that should prevent flashing on anything that does not have the correct bootloader.
Full Disclosure: I do not have an I747 or I747M, and as such, I am unable to test any of these. I have full confidence they will work as expected though. (I have been doing the modems for the T999 for a couple of years now). Still, you should know they are currently untested.
DOWNLOADS
AT&T
I747 UCUFNE4
Bell
I747M VLUFNH2
I747M VLUFNE6
Fido
I747M VLUFNF2
Koodoo
I747M VLUFNH2
I747M VLUFNE6
Rogers
I747M VLUFNF2
Telus
I747M VLUFNH2
I747M VLUFNE6
Sasktel
I747M VLUFNH2
I hope this helps! If you do happen to flash one of these, please post back whether or not it worked. Just for confirmation.
Doc
Reserved
Just In Case
4.4.4
Will this work if I am running 4.4.4 SLIMKAT?
VancouverGreek said:
Will this work if I am running 4.4.4 SLIMKAT?
Click to expand...
Click to collapse
These modems will only work if you have updated to the latest 4.4.2 base firmware and bootloaders. The ROM you are running is irrelevant. If everything is currently working, you have no need for these.
I need this files to repair Unknow baseband and IMEI null in my I747M VLUFNE6 4.4.2
Another link please.. this link dont work..
when i try to unlock the phone with NSPro, Unknow baseband and IMEI null in my I747M VLUFNE6 4.4.2.. i nedd moden firmware of my version but i can´t donload..
BR
Which one? There are 3 NE6 modems posted. (Any would probably work seeing as they appear to be identical)
And did you try any of the afh mirrors?
OP Updated!!!
OP Updated!
As requested, I have added the latest I747M, NH2 modems for the Canadian carriers that received this update.
Hello Doc, I have an issue trying to upload the modem on my sgh i747 because when I downloaded the CWM modem gives me Error 7 and dont let me upload the modem actually I have I747UCUEMJB and 4.4.4 slimkat, but my bigger problem is the imei, baseband null. helpme please all the night I wastryng many solutions and I am so tired now.. thanks
You probably never updated your firmware to 4.4.2.
To know for sure open terminal emulator and enter this.
getprop ro.bootloader
If it says MJB, you haven't updated your firmware yet and flashing this modem would permanently break your phone. If it is MJB, flash the same firmware via Odin and factory reset. That often fixes the imei problem. If it does not, pm me for further help with it. Can't post those instructions here.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Thanks for keeping the support for this phone going. I have the latest bootloader ..uemk5 for my Rogers sghI747m.
I tried to flash this and got a status 7.
I have been using the ..UEND3 Modem up till now.
You need to update first or this modem would permanently brick your device. MK5 is a 4.3 build. I think the latest Rogers is NF2. You cannot flash this modem unless you've already updated. And then you won't need this. I released these because some mistakenly flash the older 4.3 modems after updating and find it won't work, so they needed a way back.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Please make sure you guys read the whole OP
Sent from my SAMSUNG-SGH-I747 using Tapatalk
My mistake. I thought I was on the latest bootloader. I've just relied on the bootloader thread by dstruct that was linked to yours . Thx
Sent from my SGH-I747M using Tapatalk
No Cell data after root and new rom and recovery.
Hi,
This is a repost from the S3 help forum as the OP here seems very knowledgeable about modems and bootloaders. Excuse the redundancy.
I was given a used ATT I747 s3 which had stock 4.3 , modem/bootloader mjb, and knox. I rooted, removed knox and installed slim 4.4.4 rom, lean 4.4.4 kernel and latest philz recovery. All running ok
including cell calls to/from phone, mms, apps and wifi data. Same modem/bootloader (MJB), IMEI accurate after upgrade. However ATT cellular data will not connect and or transmit and/or receive using att, phone or lte APN.
Any help/thoughts appreciated?
Could be the rom. I've been hearing about a lot of connection issues on cm/aosp based roms lately. Try flashing back to stock to see if it works.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Nevermind I re read. Did it work before you installed lean kernel?
Sent from my SGH-I747M using XDA Free mobile app
In my upgrade process, the first thing I did, after the recovery had been updated to Philz, was install slim rom and lean kernel together and at the same time. That was when the problems began. They went away when I reinstalled slim rom only (without lean kernel). Everything now ok. Hope that helps.
I'll start by saying I'm very much a noob but read and read as much as I can and have been following quite closely a lot of the s3 development so anyone feel free to correct me if I'm wrong.
It seems in the past few months a lot has changed with kernels and compatibility has broken numerous times. If the dates of the releases of kernel and Rom aren't quite close then some commits in the rom could break data, wifi, etc. If your running the latest nightly Rom make sure your using a recent kernel. Always just make a backup before flashing custom kernel and then you can revert right back if the kernel breaks anything.
Hope that helps...
Sent from my SGH-I747M using XDA Free mobile app
What's the highest/latest firmware can I go for a Galaxy S3, model SGH-I747...?
I believe 4.4.2 nj2 is the newest.
where can i get the latest rootable odin firmware?
All of the stock firmware is rootable with twrp and supersu.
And where can we get last 4.4.2 for our phone?
I currently have 4.3 on my SGH-I747.
carlonchete said:
And where can we get last 4.4.2 for our phone?
Click to expand...
Click to collapse
If your device is stock the simplest solution would be to take the OTAs until you are at the most recent stock rom (NJ2).
If you are not stock you could revert to stock and take the OTAs. You also have other options. Since you have the i747 you should update sequentially, not skipping any of the releases, if you are on the 4.3 or newer bootloader and modem. (I have read this is not necessary for the i747M.) If you have a custom recovery installed you could use it to load the bootloader and modem files, in order, and then flash a compatible custom ROM. The downloads for the bootloader and modem files are available in threads by enewman17.
I haven't been specific, but then for anyone helping to be specific detailed information is needed.
aldana said:
What's the highest/latest firmware can I go for a Galaxy S3, model SGH-I747...?
Click to expand...
Click to collapse
I'm running CM 12.1 on my phone, and I believe there is even a CM 6.0 ROM out there... I also have the I747
right now from what I can see depending on what model you have the highest I can see is
4.4.2
Model SGH-I747M
Model name GALAXY S III
PDA I747MVLUFOB3
CSC I747MOYCFOB3
If the OP has the i747, nj2 is the newest stock ROM.
so I've got a t-mobile galaxy s3, rooted of course, and I've flashed a couple of these 6.0 roms, i.e. StealthBravo's unofficial CM13 and Oct-OS and both seem to drop cellular data on me. My baseband is T999UVUEMC2 and I was told that I need to update my radio/baseband, is it just a case of flashing the T999UVUEOH1 radio? Or are there other steps I have to take to get cellular data working properly on these roms and my phone? Any and all help would be greatly appreciated.
The model # sgh-t999? I ask because I don't see an mc2 ROM. Do you mean nc2? There is an OH1 ROM for the sgh-t999 which appears to be the latest ROM.
http://www.sammobile.com/firmwares/database/SGH-T999/
Yes, sgh-t999, I just want to get cellular data work I properly on these 6.0 roms such as oct-os and stealthbravo's unofficial cm13
Try flashing a stock oh1 rom via Odin, then install twrp and try the custom rom.