I wanted to unlock my note 2, it was on 4.1.2 so i decided lets downgrade to 4.1.1 and unlock it. I used the sasktel stock rom to downgrade it and it succesfully downgrade and used the free method to unlock it (*#197328640#). Now, for some reason whenever i put simcard it gives me Emergency calls only 9laready checked the simcard, its working fine, however when i try to put my old inactivated rogers simcard it does tell me unregistered simcard). Please help...
So far i tried to put bell stock firmware but no luck, didnt make any backup for efs or anything (i already tried the same thing on s3 and it worked fine so i thought it will be same thing)
Please help me
Just want to add few things, i install original stock rom through odin bootloader instead of pda. I do get the signal from my simcard if i turned my phone for few hours and turned on but when i restart i do get the same error emergency calls only. Please someone should help me here, i dont mind making a donation to any developer whoever can help me...
Can somebody help me here and atleast guide me. Should i basically call Samsung and get it replaced, its still under warranty?
Does it say emergency calls only or no sim?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
i have the same problem when i tried to unlocked with z3x, i correct all issues , imei, base-band , .. the cell looks perfect just Emergency Calls Only on bell Note 2 i317m, i tried a lot of tricks but didn't work i think it's network security part problem? any one have an idea ?
1. MY PHONE WHEN I GOT IT WAS F180S, VERSION: 4.1.2. UPDATED THROUGH PHONE IN 4.4.2. KITKAT.
THEN FOR ROOTING THE PHONE I CONVERT IT IN LOWER VERSION AGAIN 4.1.2 VIA KDG_UPDATER. AT THAT TIME THE PHONE STUCK AT LOGO, THEN FROM THE FORUM I HAVE SOLVED IT BY THE HELP OF A SENIOR MEMBER(GRATEFUL TO HIM) USING HARD RESET. I HAVE LOST THE IMEI THAT TIME AS NO BACKUP OF EFS MADE.
2. THEN I ROOT IT BY BINARY METHOD. AFTER ROOTING, THE NETWORK SIGNAL BECAME SO POOR.
3. THE I TRIED TO UPDATE, BUT IT WASNT AND SHOW ME "PHONE NOT FOUND"
4 THEN I FLASH MY PHONE BY USING "LS970ZV7_02.SV7_02.P25006.bin" VIA LGNPST METHOD. NOW IT BECOMES SPRINT LS970, VERSION: 4.0.4. 'BUT NO NETWORK SERVICE FOUND", The Sim toolkit is found in application, but sim network service is disabled.
5. WHEN I M TRYING TO UPDATE IT VIA KDZ_UPDATER WITH F180S20B, IT SHOWS SOME ERROR(ATTACHED HEREWITH)
PLEASE !!!! PLEASE!!! HELP ME OUT.....PLEASE PLEASE PLEASE...
REGARDS AND THANKS
"is there anybody, who can help me please?"....
clickanu said:
1. MY PHONE WHEN I GOT IT WAS F180S, VERSION: 4.1.2. UPDATED THROUGH PHONE IN 4.4.2. KITKAT.
THEN FOR ROOTING THE PHONE I CONVERT IT IN LOWER VERSION AGAIN 4.1.2 VIA KDG_UPDATER. AT THAT TIME THE PHONE STUCK AT LOGO, THEN FROM THE FORUM I HAVE SOLVED IT BY THE HELP OF A SENIOR MEMBER(GRATEFUL TO HIM) USING HARD RESET. I HAVE LOST THE IMEI THAT TIME AS NO BACKUP OF EFS MADE.
2. THEN I ROOT IT BY BINARY METHOD. AFTER ROOTING, THE NETWORK SIGNAL BECAME SO POOR.
3. THE I TRIED TO UPDATE, BUT IT WASNT AND SHOW ME "PHONE NOT FOUND"
4 THEN I FLASH MY PHONE BY USING "LS970ZV7_02.SV7_02.P25006.bin" VIA LGNPST METHOD. NOW IT BECOMES SPRINT LS970, VERSION: 4.0.4. 'BUT NO NETWORK SERVICE FOUND", The Sim toolkit is found in application, but sim network service is disabled.
5. WHEN I M TRYING TO UPDATE IT VIA KDZ_UPDATER WITH F180S20B, IT SHOWS SOME ERROR(ATTACHED HEREWITH)
PLEASE !!!! PLEASE!!! HELP ME OUT.....PLEASE PLEASE PLEASE...
REGARDS AND THANKS
Click to expand...
Click to collapse
Try another KDZ method. your .kdz file is probably > 1GB so maybe this can work.
http://forum.xda-developers.com/showthread.php?t=2432476
Dear olcimanic,
Thanks a lot Borther. I can flash my optimus G by F180s jellybean. But after that i have the problem of network fluctuations and sometimes no network. what can i do brother? please make a way for me.
regards
Clickanu,
Try to flash the latest 4.1.2 for your phone's original model(the model, when you bought it F180S i believe), through kdz. But remove the Sim card before flashing... Once successfully flashed, Please setup the phone for initial setup without the sim card. Once set up is complete, switch off your phone, insert sim card, reboot and search for your network operator manually, sometimes automatic searching doesn't work well.. this is just an idea, not sure, how far this will work, also, always keep in 2G, use it for sometime or somedays and then start using 3G...
Dear olcimanic,
Thanks for your suggestion. Actually i am from Bangladesh (in asia). I found this phone as a gift, when i found it, it was F180S. But The logo behind the phone is from Olleh. Can u please suggest me, how do i find the original stock firmware. I have lot my IMEI after flash...please Help.
Regards
clickanu said:
Dear olcimanic,
Thanks for your suggestion. Actually i am from Bangladesh (in asia). I found this phone as a gift, when i found it, it was F180S. But The logo behind the phone is from Olleh. Can u please suggest me, how do i find the original stock firmware. I have lot my IMEI after flash...please Help.
Regards
Click to expand...
Click to collapse
http://lg-phone-firmware.com/index.php?id_mod=20
I purchased a used Verizon LG G3 from someone online. It has Verizon all over the device; however, whenever I turned it on, US Cellular popped up on the screen. The guy told me all I had to do was call Verizon and they would activate the phone.
I contacted Verizon, and they said there was nothing they could do. I talked to a friend of mine and he said that it looked like they flashed the phone with a US Cellular firmware as the device is a VS985 but it is showing up as US990 on the firmware. I have tried flashing it back to a stock firmware of Verizon using the FlashLG Tool and stock *.tot file to which it fails and just says device model is different.
My question is, is there anything I can do to fix this or is this phone basically a paper weight?
I'm kind of new to this, so any help would be appreciated.
Thank you
Try flashing 24b using the KDZ method...
[Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method
http://forum.xda-developers.com/showthread.php?t=2785089
... w/ the file located here:
http://storagecow.eu/index.php?dir=Xda%2FLG+G3%2FStock%2FVerizon+VS985%2F
hello everyone
i don't know about android that much
when i first bought my lg g3 LS990 "sprint device" i had some issues with the 3G/LTE since i live in middle east and the only way to access 3g signals is through CDMA??!
anyway... i went to a repair man and told him about my problem he rooted my phone, flashed a custom recovery "TWRP", then flashed a custom rom
when everything was done he managed to fix the 3g signals some how but the phone still wasn't able to get 4g signals
the weird thing is that when i checked the system info the mobile's model was changed from LS990 to D855
i didn't pay much attention to that back then but in the meanwhile i did some stuff and i had to flash a custom rom so while doing that my phone soft bricked
now i'm trying to flash stock rom again the problem is when i tried to flash LS990 stock rom i had an error message that says "device model is different"
and when i try to flash D855 rom it proceeds to 6% then an error message occurs says "partition change fac... 00000064" can't see the whole error message cause flash tool is not re-sizable
so now im not able to flash D855 model's rom or ls990 one
what should i do please i need help if anybody knows
would try anything thanks in advance
Hi guys in urgent need of your opinions. When I went to an LG service centre after my phone died they replaced my mobo (E988 Singapore) with an E980 one. Soon after before I managed to root and unlock its bootloader I checked through the device details and the funny thing is that I realised it doesn't tally with any AT&T or non-AT&T E980 models as the model number was just listed as E980 and if I remember correctly the version number for the firmware listed it as an EU device?
I went forward with modding the phone and everything went well until recently when I tried to switch recoveries from CWM to TWRP. Unfortunately due to the confusion regarding my hardware (whether it was really an E980 or E988) I mucked up the process and am left with soft bricked device. Any ideas how to fix this? I don't know which KDZ file to flash for my situation. Please help me solve this as I really need to use the device urgently.
I think you'd be fine just treating it as an e980 and flashing back to stock
So I should just use any of the E980 kdz? I don't wanna risk hard bricking the device but I'll try it when I get the chance.