[Q] Motherboard Changed From E988 to a E980 at LG Service Centre? - LG Optimus G Pro

Hi guys in urgent need of your opinions. When I went to an LG service centre after my phone died they replaced my mobo (E988 Singapore) with an E980 one. Soon after before I managed to root and unlock its bootloader I checked through the device details and the funny thing is that I realised it doesn't tally with any AT&T or non-AT&T E980 models as the model number was just listed as E980 and if I remember correctly the version number for the firmware listed it as an EU device?
I went forward with modding the phone and everything went well until recently when I tried to switch recoveries from CWM to TWRP. Unfortunately due to the confusion regarding my hardware (whether it was really an E980 or E988) I mucked up the process and am left with soft bricked device. Any ideas how to fix this? I don't know which KDZ file to flash for my situation. Please help me solve this as I really need to use the device urgently.

I think you'd be fine just treating it as an e980 and flashing back to stock

So I should just use any of the E980 kdz? I don't wanna risk hard bricking the device but I'll try it when I get the chance.

Related

Flashing Original Carrier Firmware on LG G3

I purchased a used Verizon LG G3 from someone online. It has Verizon all over the device; however, whenever I turned it on, US Cellular popped up on the screen. The guy told me all I had to do was call Verizon and they would activate the phone.
I contacted Verizon, and they said there was nothing they could do. I talked to a friend of mine and he said that it looked like they flashed the phone with a US Cellular firmware as the device is a VS985 but it is showing up as US990 on the firmware. I have tried flashing it back to a stock firmware of Verizon using the FlashLG Tool and stock *.tot file to which it fails and just says device model is different.
My question is, is there anything I can do to fix this or is this phone basically a paper weight?
I'm kind of new to this, so any help would be appreciated.
Thank you
Try flashing 24b using the KDZ method...
[Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method
http://forum.xda-developers.com/showthread.php?t=2785089
... w/ the file located here:
http://storagecow.eu/index.php?dir=Xda%2FLG+G3%2FStock%2FVerizon+VS985%2F

H810 AT&T Bricked

Hello, so I think I might have seriously messed up my G4.
I started by trying to root using an H810 10G kdz, that led to my phone being soft bricked with access to the Download mode or a security lockout.
Then I realized that there was no official H810 kdz to return my phone back to stock, and found that using an H810PR kdz would work.
I tried the LG Flash Tool 2014 to to put the H810PR10a_02 kdz on the phone, but the program crashed and now I am getting no response from the phone.
So basically what are my options now? Is there anything I can do, or will I have to send it back (also if anyone has info on the affects on the warranty, that would be helpful) ?
Thanks
I have qhsusb_bulk with my H810... are you resolve a problem?

LGD855 Changed to LS990 after flashing wrong rom.and wont go back

Hello Everyone I have a problem with my LG G3 which I have bought it recently was working nice but it had KitKat so I wanted to upgrade to lollipop but didn't know that LG G3 had different variant.
I've downloaded a wrong flash (LS990 sprint) and flashed it. so I lost the network and I noticed that the imei has changed. and I don't have the original IMEI of the phone ( the sticker on the back of phone is for D855 16GB not for D855 32GB).so I think its not the original IMEI.
After bricking the phone I've opened it and noticed that it was D855 written on the motherboard.
when trying to flash the original D855 rom it doesn't work (flashed it using the crossDLL method and using the Hex Method By changing D855 to LS990 to make the flash tool think Its LS990) the flash pass on both methods but i'm stuck on LG logo.
send it to some repairing services here in my country but they didn't fix it they thought its sprint so they flashed PrimeGSM but still no network.
I think I should change the IMEI before flashing D855 or something.
please Help me I've looked all over the NET but find no solution to this problem.
If you need more informations ask me. Help me as soon as possible this is the only phone that I have.
Did you ever figure out how to fix this? I have a ls990 which was flashed with PrimeGSM and is now detected as a d855... I have been trying to get this working for the last two days with no luck
Reply
Hello
What is the problem that you are facing ?
Is it a network problem or what ?
Primegsm is ported from d855 so i think it will show D855 on any lg g3 that does'nt mean that your phone detected as d855.
Make sure your phone is ls990 or another variant
And which country and carrier ? So i can help you.
I basically have a soft bricked phone - no OS as all. I am in New Zealand running on the Vodafone network.
I was using PrimeGSM and it was working fine but decided to go back to the stock ZV8, when running through LG Flash Tool I noticed Download mode was showing the model as a D855 and would not accept the LS990 DLL - I then made the mistake of using the generic DLL with a D855 image which started a boot loop - then made more mistakes and ended up with no OS and stuck at the LG logo.
At this stage I am able to get to fastboot and use fastboot boot to get into TWRP but cannot do much from there, I also have to use the D855 TWRP image as the LS990 fails with a device tree issue. fastboot will not erase any partitions or flash any images manually. Using terminal in TWRP I am able to browse the partition though but cannot mount the SD card or use adb to push or pull (fails with error closed)
I stuffed up quite a few times along the way but sure I can recover from it since I still have quite a bit of access to the device...
I managed to get my phone going again by following a guide I found in the forum, I am pretty sure it would solve the ops issue as well.
Really quick and easy, I just bridged the points with a needle and copper cable.

Need help to unbrick LG G3 D855, IMEI shows LS990

Hello everyone,
i know there are a lot of tutorials out there to unbrick the LG G3, but none of them seems to work for me.
I got mine from aliexpress, as a D855, but the IMEI shows a LS990.
I soft-bricked it trying to update with a euro D855 rom.
I could use some help, it's me been one month and i'm still pulling my hairs out of this, even the repair store could not unbrick it.
Update
User kp263 tried to help me in private, without success, but at least i learnt that my LG G3 is refurbished. I got it from aliexpress, if it helps.
I will try a new tutorial i found on androidbricks.com and keep in touch. Sorry i can't put the exact link, due to new user restrictions.
In case you know someone in france who's able to unbrick it, i am interested.

Camera &calling app not working on my g4 (Help)

Hello,
I have a lg g4 815h bought from ebay India and using in India for a few months back...it was working fine till yesterday. A pop up was coming for a system update since 1 month so I decided to perform the update ...so I allowed the update but as soon the phone rebooted and the android sign came it showed error.
After 5 mins nothing happned so i restarted the device it booted but since then the camera is is not working says unfortunately camera has stopped ,even my phone call pick up screen is not showing when there is a call to answer...
I can call some one but cannot end the call due to no calling screen is appearing.
I did hard reset but the situation is same...
Should I flash using lg flash tool ?any version works on windows xp?I only have a windows xp Pc...
Or please provide a solution which can be performed using recovery like twrp...
Please help...
Thanks in advance
If any advices to flash my device using twrp please also suggest me a simple and stable rom
file...
Thanks
Kind Regards
one more problem I have Identified on my phone ,
I can see the hardware serial no shows LGLS991852e50ae which can be a sprint phone but the software installed shows that the phone's model is H815...
what to do...
please help
ur phone is REFURBISED?
karan5567 said:
one more problem I have Identified on my phone ,
I can see the hardware serial no shows LGLS991852e50ae which can be a sprint phone but the software installed shows that the phone's model is H815...
what to do...
please help
Click to expand...
Click to collapse
open phone . take out mother board .. and read plaque model. if sprint flash sprint KDZ and LGUP. if H815 then do that .. thats the only way to be sure.
U have a refurbished model.Go to nearest mobile repair shop & take out your motherboard to see what model no is written on this.Then flash a rom accoringly. Don't flash any other rom just by assuming else you will brick your device.
Yes my phone is refurbished...
But how to flash the rom?
If I found it to be a sprint version and flash a sprint rom ...it will be locked?I am using phone in India...
Any chance to root the phone and install twrp?
Then flash a custom rom?
Please help...
karan5567 said:
Yes my phone is refurbished...
But how to flash the rom?
If I found it to be a sprint version and flash a sprint rom ...it will be locked?I am using phone in India...
Click to expand...
Click to collapse
Most probably it will be locked cause most higher Android versions LG has blocked rooting or unlocking..But you can always browse few threads.
Mine is also a refurbished model with F500L motherboard,LS911 body & had H815 global rom installed out of the box.I am currently on F500L Nougat locked & unrooted..I have tried almost every method.It failed to root & even to enter fast boot.
If you get your proper model no on motherboard then just flash the rom with ToT flasher in download mode with respective DLL.
asingha94 said:
Most probably it will be locked cause most higher Android versions LG has blocked rooting or unlocking..But you can always browse few threads.
Mine is also a refurbished model with F500L motherboard,LS911 body & had H815 global rom installed out of the box.I am currently on F500L Nougat locked & unrooted..I have tried almost every method.It failed to root & even to enter fast boot.
If you get your proper model no on motherboard then just flash the rom with ToT flasher in download mode with respective DLL.
Click to expand...
Click to collapse
Thanks for your reply...
Your network is locked?
You cant unlock it?
Can we degrade our Os to lollipop to get root?
Even I cant turn on the Enable OEM unlock under the developer mode...
Any more advices?
Please help.....
I have tried almost all h815 ans ls991 roms with all flashing methods but still unable to successfully flash my device...lg tot flash tool always show dl error after 4 to 6 percent of flashing...
Please help
Any idea's?
Pick the phone, and send it to the place where you bought it. If you have warranty the repair is free, if not, then you must pay sadly.
Still no solution, I even cannot enable OEM unlock under developer options...
It automatically disables it...
Please help
Just experienced this issue after changing sim card... Call and Camera stopped working over and over again.
How I solved it: Go to the specific app that is causing you trouble, and clear cache/files (too bad I only found this after 3 factory resets).
Maybe it will help ... LG G4 CAM

Categories

Resources