Related
Is it possible to disable this mode? It looks like the stupid CD thing Verizon puts on there, anyone know offhand which files/folders to remove to get rid of this?
I'd rather it go directly to MTP.
Quantumrabbit said:
Is it possible to disable this mode? It looks like the stupid CD thing Verizon puts on there, anyone know offhand which files/folders to remove to get rid of this?
I'd rather it go directly to MTP.
Click to expand...
Click to collapse
You could just freeze all of the Verizon bloat and I'm sure that will solve this.
Pilz said:
You could just freeze all of the Verizon bloat and I'm sure that will solve this.
Click to expand...
Click to collapse
I tried freezing all apps with vzw and verizon in them... didn't seem to solve this. Even after reboot.
Quantumrabbit said:
I tried freezing all apps with vzw and verizon in them... didn't seem to solve this. Even after reboot.
Click to expand...
Click to collapse
It could be a system default then in the system files, but I 'm not too sure. I haven't had Verizon since I had my GS3 a few years ago, but that phone did the same thing.
Pilz said:
It could be a system default then in the system files, but I 'm not too sure. I haven't had Verizon since I had my GS3 a few years ago, but that phone did the same thing.
Click to expand...
Click to collapse
My incredible and rezound there was just one file to remove. The SGS3 didn't do it as I recall at all... or I inadvertently disabled it super early.
Quantumrabbit said:
My incredible and rezound there was just one file to remove. The SGS3 didn't do it as I recall at all... or I inadvertently disabled it super early.
Click to expand...
Click to collapse
Mine did it, but then again it wasn't rooted (this was before I knew the dark magic). I'll see if I can find an answer for you from my friend with a Verizon G3.
works like a charm
just jump into the system folder and rename the autorunusb.iso file to .bak. make sure you go into settings>storage>setting USB PC Connection and select media device. Should be the default going forward.:good:
mrcr0nic said:
just jump into the system folder and rename the autorunusb.iso file to .bak. make sure you go into settings>storage>setting USB PC Connection and select media device. Should be the default going forward.:good:
Click to expand...
Click to collapse
unfortunately, this does not work, especially on a Mac.
After renaming the file, and confirming that teh storage settings were correct, it still launches into the installer mode, even if it doesnt auto-mount the folder. This takes up a whole minute while it works itself out.
Other online searches haven't shown anything else to help either.
I still can't get the ADB drivers to work on this mac either... I'm rather upset that LG would release a device that isnt compatible with machines for development the way almost all flagships are.
fixed!
http://forum.xda-developers.com/showpost.php?p=55725408&postcount=1
mrcr0nic said:
fixed!
http://forum.xda-developers.com/showpost.php?p=55725408&postcount=1
Click to expand...
Click to collapse
Is this the only way? When I try entering ##3328873 it rings and then a lady comes on and says welcome to verizon wireless your call cannot be completed as dialed
Work no longer let's us carry our phones with us there for the 360 will spend a lot of its time with no phone connection. I'm assuming it will still keep time? I only ask because an early Sony smart watch couldn't. What else? Can you still set timers use the stop watch? Can you use apps that don't require Internet connection like a calculator?
Anyone?
I don't have one but if it's like the g watch you will be able to still use the functions you asked about.
Sent from my HTC One_M8 using Tapatalk
That's what I would expect.. But you never know these days. I just didn't want some usless brick that says please sync all day.
Thanks
Yes, I can still check the time, set a timer, use the stop watch, etc. I haven't found a calculator app that works on the round display, yet.
It seems like voice recognition doesn't work, but anything you can run from the menu does. So you can set an alarm, timer, etc, though you have to use the touch interface which may not be as flexible.
I hope they give the option for offline voice recognition at some point. I think it would be very advantageous to be able to do basic tasks like setting reminders, alarms and creating notes etc. these could easily then sync once the phone is reconnected. There's no hardware reason why this wouldn't be possible it will just require implementation.
Tung_meister said:
I hope they give the option for offline voice recognition at some point. I think it would be very advantageous to be able to do basic tasks like setting reminders, alarms and creating notes etc. these could easily then sync once the phone is reconnected. There's no hardware reason why this wouldn't be possible it will just require implementation.
Click to expand...
Click to collapse
Also, if you put it in airplane mode, it doesn't even give you the voice prompt screen... instead it immediately shows the list of activities / apps you can do. Voice on that screen does not work at all. Too bad!
GTvert90 said:
Work no longer let's us carry our phones with us there for the 360 will spend a lot of its time with no phone connection. I'm assuming it will still keep time? I only ask because an early Sony smart watch couldn't. What else? Can you still set timers use the stop watch? Can you use apps that don't require Internet connection like a calculator?
Click to expand...
Click to collapse
Worked fine for me today. Just shows a Google cloud icon with a slash through it on the screen.
Does anyone know if i can set it up without phone? Like only watch the time and heart js enough but I have to know if i cqn set it up?
Mikeartworks said:
Does anyone know if i can set it up without phone? Like only watch the time and heart js enough but I have to know if i cqn set it up?
Click to expand...
Click to collapse
I'm pretty sure this is not possible. When you first take it out of the box, it asks for a language, after selecting one, no swiping, tapping, or anything else can get it from a screen saying to download the Wear app on your phone. It simply will not do anything until it does.
That's my experience, anyway. I couldn't get anything until my phone synced.
Johmama said:
I'm pretty sure this is not possible. When you first take it out of the box, it asks for a language, after selecting one, no swiping, tapping, or anything else can get it from a screen saying to download the Wear app on your phone. It simply will not do anything until it does.
That's my experience, anyway. I couldn't get anything until my phone synced.
Click to expand...
Click to collapse
Yeah I talked to motorola customer service and they said that it won't ask that if it doesn't detects a android phone nearby. Hope this is true.
You have access to all of your watch apps like still. All apps that depended on your phone (like google now) won't work anymore. Basically what you'd expect.
Is there a way to read and respond to messages I receive on my N5 from my N7?
Tablet Talk
DOBBY0 said:
Is there a way to read and respond to messages I receive on my N5 from my N7?
Click to expand...
Click to collapse
Mighty Text - phone app https://play.google.com/store/apps/details?id=com.texty.sms
Mighty Text - tablet app https://play.google.com/store/apps/details?id=com.mightytext.tablet
Works well. You can even go online and view/reply through a pc
henderjr said:
Mighty Text - phone app https://play.google.com/store/apps/details?id=com.texty.sms
Mighty Text - tablet app https://play.google.com/store/apps/details?id=com.mightytext.tablet
Works well. You can even go online and view/reply through a pc
Click to expand...
Click to collapse
Do o need the app on phone and tablet? Or can I just have it on n7
DOBBY0 said:
Do o need the app on phone and tablet? Or can I just have it on n7
Click to expand...
Click to collapse
Both.
To text from TABLET, first install this app on your phone, then install our MightyText tablet app: https://play.google.com/store/apps/details?id=com.mightytext.tablet
I use Tablet Talk and it's the same way, the app runs on both devices and they stay connected via BT or Wifi. I may have to give this one a try and compare.
mjones73 said:
Both.
To text from TABLET, first install this app on your phone, then install our MightyText tablet app: https://play.google.com/store/apps/details?id=com.mightytext.tablet
I use Tablet Talk and it's the same way, the app runs on both devices and they stay connected via BT or Wifi. I may have to give this one a try and compare.
Click to expand...
Click to collapse
Interesting, I'll try both
DOBBY0 said:
Interesting, I'll try both
Click to expand...
Click to collapse
Tablet Talk isn't free but you only need to purchase it once, I'd try this other one first.
MightyText uses the network. My favorite part is I can view my texts via https://mightytext.net/web/ and also send from there. So if I forget my phone at home I can log in from work and view/reply/send. They do store the texts on their server so you are risking that I guess. You can specify how many days worth of text to save on their side. This gives more detail as well http://mightytext.net/
Mighty text is pretty nice I like it
+1 for MightyText. I use it on my N7 and Moto X 2013. There is also a Chrome extension for texting from your computer.
Can Mighty Text let you answer phone calls via your Tablet? By that I mean the phone still answers the call, you can just remote it from the tablet.
mjones73 said:
Can Mighty Text let you answer phone calls via your Tablet? By that I mean the phone still answers the call, you can just remote it from the tablet.
Click to expand...
Click to collapse
I don't believe so. Not sure there are any apps that can do this.
fury683 said:
I don't believe so. Not sure there are any apps that can do this.
Click to expand...
Click to collapse
Tablet Talk can, I want to try out Mighty Text, just seeing if it's there. With Tablet talk if the phone rings, I get a pop up on my Tablet to answer it. It's primarily for someone using a head/bluetooth. I use my tablet in the car for Nav/Music and my phone as a hot spot. I can answer calls from the tablet without needing to pick my phone up.
I do like the server based model with Mighty Text. Tablet Talk depends on the devices connecting together via BT or over the same wifi network.
mjones73 said:
Tablet Talk can, I want to try out Mighty Text, just seeing if it's there. With Tablet talk if the phone rings, I get a pop up on my Tablet to answer it. It's primarily for someone using a head/bluetooth. I use my tablet in the car for Nav/Music and my phone as a hot spot. I can answer calls from the tablet without needing to pick my phone up.
I do like the server based model with Mighty Text. Tablet Talk depends on the devices connecting together via BT or over the same wifi network.
Click to expand...
Click to collapse
Sorry, I misunderstood the question. I thought you wanted an app that let you actually take the call through your tablet with voice, not just control the phone being answered. MightyText does have an option to notify the tablet/PC when the phone is ringing, but I'm not sure if you can initiate the call with it or not.
I just checked my settings and turned it on for my phone. Not sure why it was off.. but the other day for the first time since I started taking the bus to work in July I got a phone call on the ride home. I had my headphones in, which were plugged in to my tablet, so I didn't hear my phone until it got to the loudest ringer (escalating "Maneater" by Hall & Oates ).
fury683 said:
Sorry, I misunderstood the question. I thought you wanted an app that let you actually take the call through your tablet with voice, not just control the phone being answered. MightyText does have an option to notify the tablet/PC when the phone is ringing, but I'm not sure if you can initiate the call with it or not.
I just checked my settings and turned it on for my phone. Not sure why it was off.. but the other day for the first time since I started taking the bus to work in July I got a phone call on the ride home. I had my headphones in, which were plugged in to my tablet, so I didn't hear my phone until it got to the loudest ringer (escalating "Maneater" by Hall & Oates ).
Click to expand...
Click to collapse
The notification is nice, at least you know you have a call. Nice ring tone btw..
I finally got everything worked out in the car so that the tablet connects to my head unit for music and the phone connects for phone. The tablet and phone connect to each other via BT for Tablet Talk to work and the tablet uses the hotspot on my phone. I almost have it all automated also, just need to work out something in tasker to turn my hotspot on when I have some time to play around with it.
mjones73 said:
The notification is nice, at least you know you have a call. Nice ring tone btw..
I finally got everything worked out in the car so that the tablet connects to my head unit for music and the phone connects for phone. The tablet and phone connect to each other via BT for Tablet Talk to work and the tablet uses the hotspot on my phone. I almost have it all automated also, just need to work out something in tasker to turn my hotspot on when I have some time to play around with it.
Click to expand...
Click to collapse
Depending on the order of events, you could turn on hotspot as soon as your phone connects to the car. And when your tablet connects to the head unit, turn on wifi (if you keep it off for battery saving).
I actually have Tasker turn my hotspot on when I get out of the car (if it's M-F from 6:30a-7:30a; when I go to get on the bus), and turns off when my tablet detects that I'm near my work WiFi. In the afternoon Tasker enables WiFi at 4:30 when I leave work and stays on until bluetooth connects in my car again after I get off the bus.
fury683 said:
Depending on the order of events, you could turn on hotspot as soon as your phone connects to the car. And when your tablet connects to the head unit, turn on wifi (if you keep it off for battery saving).
I actually have Tasker turn my hotspot on when I get out of the car (if it's M-F from 6:30a-7:30a; when I go to get on the bus), and turns off when my tablet detects that I'm near my work WiFi. In the afternoon Tasker enables WiFi at 4:30 when I leave work and stays on until bluetooth connects in my car again after I get off the bus.
Click to expand...
Click to collapse
Thanks for the tip, I figured I could trigger it off the BT connect, gotta see if I can get the app to open and turn on, on a stock LG G2 so it's a modded copy of the Verizon mobile hotspot..
mjones73 said:
Thanks for the tip, I figured I could trigger it off the BT connect, gotta see if I can get the app to open and turn on, on a stock LG G2 so it's a modded copy of the Verizon mobile hotspot..
Click to expand...
Click to collapse
I don't have a modded Hotspot app, but I use the Tasker toggle in Net > WiFi tether. Works great. If you're rooted, you can also use shell commands to simulate input if you need to open the Hotspot app and press a button. Not hard, I can share details if needed.
mjones73 said:
Thanks for the tip, I figured I could trigger it off the BT connect, gotta see if I can get the app to open and turn on, on a stock LG G2 so it's a modded copy of the Verizon mobile hotspot..
Click to expand...
Click to collapse
fury683 said:
I don't have a modded Hotspot app, but I use the Tasker toggle in Net > WiFi tether. Works great. If you're rooted, you can also use shell commands to simulate input if you need to open the Hotspot app and press a button. Not hard, I can share details if needed.
Click to expand...
Click to collapse
Now that I'm on a PC (was on my phone last night) I can explain the shell command option. If using the regular Net > Wifi Tether option doesn't work in Tasker, try this way.
First, go to Developer Options in your settings menu (if you don't have Dev Options, go to Settings > About Phone and tab the build number 7 times until it says you're a developer) and turn on Pointer Location. This will put a gray bar at the top of the screen showing the coordinates of where you're touching. Go into your hotspot app and note the coordinates of whatever buttons you need to press to enable and disable the hotspot. The coords you want are X and Y and should be the second set of numbers from the left.
Have a Tasker action open the hotspot app you need, then make a new action with Script > Shell.
In the Command portion, type:
Code:
input tap X Y
Where X and Y are the coordinates you recorded earlier for whatever button you need to press to enable hotspot. Make sure the Use Root checkbox is checked. If you need more than one input command, make another Script > Shell using the same method. I usually put Task > Wait for 1 second between input commands just to give the phone a moment to think. Do the same in reverse for your exit task to turn it back off again.
Once you set it up, press the play button in the lower left corner to test it out. You will need to grant Tasker root access if you haven't done so previously.
Let me know if you have questions, happy to help.
Finally a way to track steps with any android wear watch and have it automatically log into My Fitness Pal!
Follow the directions below originally taken from this link: http://steamoctane.com/2015/01/use-android-wear-smart-watch-myfitnesspal-calorie-counting/
Please check pics for reference
Intro
Android Wear is becoming one of the most popular wearable’s out in the market right now, and what some people miss about these devices is that they can double as a fitness band and step counter and some even have heart rate monitoring capabilities. Now you wont get much out of this detail with Google Fit until the app is more robust, so in this guide we are going to recommend another app to help with your fitness goals; MyFitnessPal…
MyFitnessPal
MyFitnessPal is in our opinion the most robust app in the app market for loosing weight. This app is cross compatible to almost every mobile OS, it is 100% FREE, comes with a stellar food database, and is loaded with features. We recommend you try it, or chances are you are already using it. Sign up for free at http://www.myfitnesspal.com, and download the app from your respective marketplace.
Android Wear
The following tutorial is for android wear smart watches. If you are in the market for one, we recommend the below as they have all the features required, and are the bests one on the market now.
What you need (Hardware)
You will need the following equipment to complete this guide.
Android Smart Watch
Android Smart Phone running 4.4+
Software you need
Up by Jawbone (not Up24)
MyFitnessPal
Instructions
If you haven’t already download the Up from Jawbone app from google play, while your there you might as well download MyFitnessPal if you don’t already have it.
Open the Up app and signup with Jawbone then sign in if needed.
Tap the menu button in the top left corner (The three lines). Then tap settings and finally tap Application Preferences.
Make sure phone motion sensor is turned on.
Go home and tap the watch icon on the top right. Your watch should be connected to the app, if not check that your smartwatch is paired with your phone, turned on and is in range, then restart the app.
Go to the MyFitnessPal app.
Click the menu button, scroll down and tap settings. Then Click Steps.
Tap add a device then choose Jawbone UP.
Click Connect, then sign in if it asks and click allow.
Your done!
Now your smartwatch will report steps to the UP app, which in turn will send the data to MyFitnessPal and log your calories burned.
Keep in mind it may take 24 hours for your steps to start showing up in the myfitnesspal app after performing the above steps.
How do you connect your moto 360 with up app? For me only my phone is displayed on the upper right but not my moto 360?
Gesendet von meinem SM-N9005 mit Tapatalk
Thanks, I was able to use your steps to connect my 360 to LoseIt as well.
Thank you. I was looking for a way to circumvent the fact that Google Fit doesn't communicate its information out to any 3rd party apps which would then tie into MyFitnessPal. This worked great. Seavers11, I had the same issue initially but after the setup I exited the UP application, came back in and the watch icon had replaced the phone icon in the upper corner.
seavers11 said:
How do you connect your moto 360 with up app? For me only my phone is displayed on the upper right but not my moto 360?
Gesendet von meinem SM-N9005 mit Tapatalk
Click to expand...
Click to collapse
The thing is you have to wait for the up app to install on your watch. hit the resync apps button in the wear app and you should be good to go!
Polycron said:
Thank you. I was looking for a way to circumvent the fact that Google Fit doesn't communicate its information out to any 3rd party apps which would then tie into MyFitnessPal. This worked great. Seavers11, I had the same issue initially but after the setup I exited the UP application, came back in and the watch icon had replaced the phone icon in the upper corner.
Click to expand...
Click to collapse
You are welcome dude!
Another way is to use withings. Connect it to your google fit and my fitness pal accounts and it will sync your steps from google fit through to my fitness pal.
What I've found is that it only appears to sync steps around an hour after you have took your watch off. Maybe its waiting until you appear to have stopped for the day?
Sent from my SM-N9005 using XDA Free mobile app
Thanks for this. It does take a while for myfitnesspal to update with the steps.
diggedy said:
Another way is to use withings. Connect it to your google fit and my fitness pal accounts and it will sync your steps from google fit through to my fitness pal.
What I've found is that it only appears to sync steps around an hour after you have took your watch off. Maybe its waiting until you appear to have stopped for the day?
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Are you referring to the Health Mate app they offer?
saryon1 said:
Are you referring to the Health Mate app they offer?
Click to expand...
Click to collapse
Bump?
saryon1 said:
Are you referring to the Health Mate app they offer?
Click to expand...
Click to collapse
Yes he is but I find the up app is more accurate when used with my fitness pal
I have been using it and it works pretty good. Battery life on both watch and phone are unaffected
Sent from my D5803 using Tapatalk
Thanks for this it help a lot
Major find here.... THANK YOU!!!!
just followed your instructions and got everything setup
guess i'll have to wait a day or two to see my data in the respective apps
it's too bad Google Fit doesn't track all this by itself... i assume it did before i purchased the watch
Got everything setup thanks
Thanks so much I need this, for do all the use for my M360
Thanks for the info. I tried to use it for several months but the calorie adjustments were way out of wack. I got tired of inaccurate information syncing with myfitnesspal and inability to sync running data without it double reporting. I am trying this new app now called FatSecret and syncing my walking & running data with Google Fit. Time will tell if this is a better combination...
Thanks.. works great.
I use an app called cinch... It syncs your steps and also records your heart rate at set internal from your watch to Google fit.
https://play.google.com/store/apps/details?id=com.ryansteckler.perfectcinch
Sent from my SM-N910C using Tapatalk 2
I gave in and just bought a Fitbit Charge. Jawbone UP shows me with 30% more steps, and there doesn't appear to be any way of correcting that.
Both my Xperia Z Ultra and tablet show the option to open the login window after i Connect but not the note 4. Any ideas?
shaolin95 said:
Both my Xperia Z Ultra and tablet show the option to open the login window after i Connect but not the note 4. Any ideas?
Click to expand...
Click to collapse
Only thing you can do is try different browsers... most of the time I need to use Chrome just to connect
shaolin95 said:
Both my Xperia Z Ultra and tablet show the option to open the login window after i Connect but not the note 4. Any ideas?
Click to expand...
Click to collapse
On any device, go to your Wi-Fi settings, long click on the network you are connected to, check "advanced options", under "IP settings" select static and copy the number that is in the "gateway" box. click cancel, go to your browser and enter that number in the address bar. you should be taken there unless they have some crazy rerouting going on.
raynan said:
On any device, go to your Wi-Fi settings, long click on the network you are connected to, check "advanced options", under "IP settings" select static and copy the number that is in the "gateway" box. click cancel, go to your browser and enter that number in the address bar. you should be taken there unless they have some crazy rerouting going on.
Click to expand...
Click to collapse
Somehow after a million tries it worked but I thank you guys for the info. I will keep it handy for the future!.