Hi bacon people!
This is my modified kernel with some kernel optimizations and some compiler optimizations.
The goal of abyss is to achieve improved performance/battery without the cost of stability.
I will not be overhauling this project with changes that are not logical to add.
This kernel should work on the latest 7.x.x roms like CyanogenMod and any other AOSP based rom.
It will not work with "CAF" based roms (any roms using Sultanxda trees).
It will not work with Omni based roms either (any roms using Omni trees).
It will not work with AOSParadox based roms too.
How does one achieve this?
- build kernel with an optimized toolchain
- use compiler optimization flags (experimental)
- remove redundant code
- improve existing code with more efficient code
- reduce/increase speed of timers (depends on what type of function)
- etc. (most are not easy to explain)
Is there actually a performance improvement?
With all the changes added up, there should be. Whether or not one notices the difference is another thing.
Personally, I do feel the performance difference on my Moto G 2013; it is easier to notice the difference with lower level specs..
For those interested in how the kernel optimizations will benefit/work, please look at my github source and read the commit messages.
For those interested in how the compiler optimizations/hacks will benefit/work, please look at this article.
Downloads:
Latest build
BasketBuild
Source:
GitHub
I do not mind if there's some non-development/off-topic discussion here, just no discussion about other works that is nowhere near related to mine.
Also, please refrain from comparing works here; it really kills the spirit of development. Go do that in some other thread.
XDA:DevDB Information
abyss kernel for aosp roms, Kernel for the OnePlus One
Contributors
YoshiShaPow
Source Code: https://github.com/abyss-kernels/bacon
Kernel Special Features:
Version Information
Status: Stable
Created 2015-08-25
Last Updated 2016-12-09
Don't like the defaults?
Use Kernel Adiutor to change the settings!
Frequently Asked Questions:
Is this a custom kernel?
I was asked this question once, and it posed as a real good question. I do not consider abyss to be a "custom kernel" per se, but more so as a modified kernel. The patches and features that go into this kernel do not make it customizable. What they do is improve what has already been implemented. It is like swapping a car's engine for a better one rather than just adding LED flooring lights and fancy car mats.
Can you add [this] and [that] feature?
Something I pride myself with this kernel is that it does not have a bunch of random, useless features or patches mashed into it. Everything put into this kernel is thought out well and tested. I see a lot of works being made popular because it has [this] and [that] feature when really, it's nothing revolutionary. As a matter of fact, most things added to any kernel will not make it 5x better than any other kernel. Most of the time, simple is better; and in this case it definitely is!
Main Patches and Features:
- updated security patches (dirty cow vulnerability resolved)
- updated sched drivers
- KCAL Control Driver
- backported random from Linux 3.16+
- kexec hardboot patch for Multirom
- Abyss Optimizations (compiler)
- disabled debugging for more performance throughout
- lots of patches for better performance here and there... too many to list
- simplified thermal driver (more aggressive while maintaining performance)
- USB Force Fast Charge
- Android N ready!
How to install:
Place zip on to your internal storage
Place current ROM zip on to your storage
Boot into TWRP recovery
(If you're coming from a different kernel, dirty flash current ROM)
Flash kernel zip
Reboot
@YoshiShaPow thank you for sharing your work..
A heads up.. I used flashify to flash it on Euphoria CAF version.. And it booted fine.. All seems ok.. Would report in case of any issues.. Works well as of now.. Using smartmax eps..
Cheers..
Sent from my A0001 using Tapatalk
---------- Post added at 09:18 AM ---------- Previous post was at 09:15 AM ----------
You can add to the op that the kernel boots fine mein euphoria caf build..
Sent from my A0001 using Tapatalk
flashify user, boots on sultans latest cm12.1 from 08/24. FYI. Cheers
Boots on Bliss uber as well..!! M back to euphoria caf now..
Lets call it fusion caf kernel.. For all the hard work in slimsaber and since it began with slimsaber.. Just saying [emoji14]
Sent from my A0001 using Tapatalk
Right on time my friend. Thanks for the kernel. will test it
drdrewdown said:
flashify user, boots on sultans latest cm12.1 from 08/24. FYI. Cheers
Click to expand...
Click to collapse
geekynoob said:
Boots on Bliss uber as well..!! M back to euphoria caf now..
Lets call it fusion caf kernel.. For all the hard work in slimsaber and since it began with slimsaber.. Just saying [emoji14]
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
geekynoob said:
@YoshiShaPow thank you for sharing your work..
A heads up.. I used flashify to flash it on Euphoria CAF version.. And it booted fine.. All seems ok.. Would report in case of any issues.. Works well as of now.. Using smartmax eps..
Cheers..
Sent from my A0001 using Tapatalk
---------- Post added at 09:18 AM ---------- Previous post was at 09:15 AM ----------
You can add to the op that the kernel boots fine mein euphoria caf build..
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
All added, many thanks to the testers!
About the name, I am looking to keep it themed close/related to my username.
YoshiShaPow said:
Off-Topic Conversation:
Do any users play CS:GO? Add me on Steam and let's play
Click to expand...
Click to collapse
@CraZY_BoY^
EasyGoingXD said:
@CraZY_BoY^
Click to expand...
Click to collapse
CSGO!!!!?!??? DD
Who said CS:GO?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
not booting for me.. bisspop caf..tried both flashify n fastboot methods
No flashable zip mate?
madsponge26 said:
No flashable zip mate?
Click to expand...
Click to collapse
He said it's coming soon. Did you read the first post?
---------- Post added at 06:30 PM ---------- Previous post was at 06:29 PM ----------
@YoshiShaPow I think you should just call it "Egg kernel" given that you're a Yoshi
Isn't it the same kernel which you have implemented in your latest CAF build?
Which toolchain are you using? UBERTC 5.2.1?
@YoshiShaPow
HEY!
Glad you decided to come on back! Just FYI, I was able to get CAF working with AnyKernel. I will make sure my source is up to date so you can use if you want. Regardless glad you decided to take a stab at kernel building again and can't wait to see what you cook up!
Render
@YoshiShaPow how about the names "eggs and bacon"
Anyways if you need an Legendary Eagle friend, you can que with me and my buds for a 4-5 man crew ;D
One request bro, can you add Boeffla's capacitive keys backlight control? Also, are you planning to add a custom UKM for your kernel or are you only planning kernel auditor support?
CraZY_BoY^ said:
Who said CS:GO?
View attachment 3450819
Click to expand...
Click to collapse
_ASSASSIN_ said:
@YoshiShaPow how about the names "eggs and bacon"
Anyways if you need an Legendary Eagle friend, you can que with me and my buds for a 4-5 man crew ;D
Click to expand...
Click to collapse
Bwaahaha I'm Legendary Eagle too! But I don't want to make my main account public hehe...
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOURCE | CREDITS | DISCLAIMER | DOWNLOADS | FEATURES | FAQ
**Snapdragon™ is a registered trademark owned by Qualcomm Technologies Inc.
**Synapse™ is a registered trademark owned by @Andreilux
**(v1)Xcelerate Logo™ is created by @fareed_extreme
**(v2)Xcelerate Logo™ is created by @Sharan Narayan
**(v3)Xcelerate Logo™ is created by @JeGuina
XDA:DevDB Information
Xcelerate Custom Kernel, Kernel for the Xiaomi Redmi 1S
Contributors
kairi_zeroblade
Source Code: https://github.com/zeroblade1984/Xiaomi-MSM8226
Kernel Special Features: Good Battery life, Thermal Engine, Custom Hotplug, Xiaomi KCAL control
Version Information
Status: Stable
Current Stable Version: Production build 24
Stable Release Date: 2015-12-18
Created 2015-01-12
Last Updated 2015-12-18
Reserved
Short Credit list:
(more people here:Github)
Armani Devs (@jsevi83 and @Kra1o5) for initial device bring-up
Anybody who has unselfishly helped me in anyway(through donations, testing, promotions and moral support)
Short Feature list:
(Full feature list including Developmental Goals are on Github)
Basic Governors(I won't add Ripoffs, Ondemand is in continuous development to give you a balance between savings and performance)
Built using my own GCC 4.8.x/4.9.x/5.1.x Toolchain built across the standards of Google's own Toolchain..
Simple and no fancy stuff..(more does not guarantee it's better)
Uses a simple free and user friendly application called Synapse by @AndreiLux for configuration purposes(slightly adding more functionality)
A Few Notes:
Be advised that this kernel is best used "As is" i do want to prohibit the use of scripts that they say "enhances performance and battery" just use the kernel as it is..everything is managed automatically by the kernel and rest assured continuous innovations are en-route.
Supporters:
I would like to express my sincerest gratitude by saying thank you and a continued commitment to get things better on this device via what i do best..kernels..
And these individuals who are generously helping me fund the device, deserve the same credit for that whole-hearted effort in doing so..(they come in no particular order)
Praveen Kumar
Amit Painter
Jagdish Shirsat
My sincerest Thanks!!(once again)
Current Piggy Bank: 59$
Compatibility list:
According to testers/users feedback the Kernel works on the FOLLOWING ROMS(tested)
CyanogenMod 11(Stable)
PAC ROM(Stable)
CR Droid(Stable)
Carbon(Stable as reported by one User and Tester)
Any ROM based on Armani Devs sources
The list will grow as soon as Testers/Users can provide means and ways to make this compatible with everything..
All you need to know about TA-MOD
Reserved
Grab user banners here:
Xiomi is in for a real treat! Good to see! :good:
Good to see one more kernel..
Thanx...I am the first to try your work...downloading...
The Governor and Scheduler rosters are also part of the features as well as the Toolchain used to build this Kernel, they should be visible at the OP. Thanks, will try this as soon as I get to a power source.
I can't see the kernel features in post 1?
Sent from my HM 1S
gummie said:
The Governor and Scheduler rosters are also part of the features as well as the Toolchain used to build this Kernel, they should be visible at the OP. Thanks, will try this as soon as I get to a power source.
Click to expand...
Click to collapse
xylu said:
I can't see the kernel features in post 1?
Sent from my HM 1S
Click to expand...
Click to collapse
kindly click links on OP they should lead you to my Github where a full WIKI of what you are asking are located and can be found..I don't usually enjoy posting long OP's..:good:
I am also not fond of alot of cpu governors that are ripoffs..i just try to optimize Ondemand to my liking..if you have doubts on my statement read over this thread..also the last few pages were a milestone..
i have added a screenshot of last night's last beta test..
myrigon said:
Xiomi is in for a real treat! Good to see! :good:
Click to expand...
Click to collapse
Yeah for sure these guys are gonna love it.. they are in for one hell of a ride..
EDIT: wake gestures is a WIP as i am trying to clean some stuff out..all your other requests like Voltage control are WIP(we have already have this working on Desire 816 test kernel just a few minor stuff needs to be worked out..also this change needs a DT edit and unfortunately using the DT's supplied by Xiaomi, the device does not bootup..without the proper DT's the voltage control won't work unless someone would like to collaborate with me on this..the same thing goes for GPU and CPU Overclocking..)
kairi_zeroblade said:
kindly click links on OP they should lead you to my Github where a full WIKI of what you are asking are located and can be found..I don't usually enjoy posting long OP's..:good:
i have added a screenshot of last night's last beta test..
Click to expand...
Click to collapse
Yeah, I know and already read the whole thing but I also didn't see the Governor and Schedulers there. It's just that some people would really appreciate to see what they are dealing with first hand. Links to changelog is also good just for others to keep on tabs. You also have that "Features:" thingy so I thought you would put something there.
May I flash this kernel on stock ROM? I don't see any explanation about this on faq. Thanks
anangnovi said:
May I flash this kernel on stock ROM? I don't see any explanation about this on faq. Thanks
Click to expand...
Click to collapse
Currently the kernel is tested only on CM11 R15...You can give a try but not sure whether it will work...
anangnovi said:
May I flash this kernel on stock ROM? I don't see any explanation about this on faq. Thanks
Click to expand...
Click to collapse
well its based on Xiaomi's official source..if you can provide me stock boot.img from stock ROM i can repack this build to be able to boot on Stock ROM(MIUI) which i would love too..
OR
Will do an anykernel Installer next update which might come in a few days time( i have to release to my M7 and M4 threads )..
EDIT: I am also looking for a small group of testers.. both for MIUI stock ROM and AOSP based ROM's..
I've been using @kairi_zeroblade's Xceed kernel on the HTC m7. His custom hot plug work, ondemand CPU governor refinements and other coding efforts quite simply deliver the best battery life, screen-on-time, and smoothest performance that I've ever experienced on this phone.
This is a perfectionist developer who's going way beyond the simple code collecting, tweaking and compiling that goes into so many of the "custom" kernels we find on XDA.
Enjoy!
kairi_zeroblade said:
well its based on Xiaomi's official source..if you can provide me stock boot.img from stock ROM i can repack this build to be able to boot on Stock ROM(MIUI) which i would love too..
OR
Will do an anykernel Installer next update which might come in a few days time( i have to release to my M7 and M4 threads )..
EDIT: I am also looking for a small group of testers.. both for MIUI stock ROM and AOSP based ROM's..
Click to expand...
Click to collapse
I really want to help your work, so.. where i can/create find the stock boot.img? I'll try to provide it for you.
And i like to test your kernel on my stock MIUI v.45 and give a report, when it's able to boot on stock ROM. Thanks
@kairi_zeroblade !! Awesome work mate, good to see you have started working for our device !! I have heard a lot about your kernel for HTC M7 from my frnds, they say your kernel just rocks... Now its time for Redmi 1S to get some love from you... Going to try it tonight .. Thnax a lot for your contribution !!
kairi_zeroblade said:
well its based on Xiaomi's official source..if you can provide me stock boot.img from stock ROM i can repack this build to be able to boot on Stock ROM(MIUI) which i would love too..
OR
Will do an anykernel Installer next update which might come in a few days time( i have to release to my M7 and M4 threads )..
Edit: Yeah do it as Anykernel 2.0 because that would be more friendlier since Redmi 1S is going to get multiple versions of Android.
I like your style Dude, simple kernel. I too don't care, really for many features too as long as I get Interactive, SIO, Voltage Control and msm_hotplug or intelli-plug (either of the two would do for me).
EDIT: I am also looking for a small group of testers.. both for MIUI stock ROM and AOSP based ROM's..
Click to expand...
Click to collapse
I can be one of the Testers on Stock, I'll be on CM11 for a while.
I like your style Dude, simple kernel. I too don't care, really for many features too as long as I get Interactive, SIO, Voltage Control and msm_hotplug or intelli-plug (either of the two would do for me).
Edit: Yeah do it as Anykernel 2.0 because that would be more friendlier since Redmi 1S is going to get multiple versions of Android.
Good to see a renowned Dev working for a little device. BTW Cezar bro, hats off to your work and on behalf of user of Redmi 1s, I welcome you on board here....
Here is last night's usage. I kept out of charge at 72%. WiFi always on, mobile network always on, no tweaks, nothing done to CPU...
But best back up, it was at 67% when I woke up in the morning....
Sent From:-
""The Little Beast of XIAOMI""
Here is the entropy score from synapse...awesome Kairi bro....
kairi_zeroblade said:
well its based on Xiaomi's official source..if you can provide me stock boot.img from stock ROM i can repack this build to be able to boot on Stock ROM(MIUI) which i would love too..
OR
Will do an anykernel Installer next update which might come in a few days time( i have to release to my M7 and M4 threads )..
EDIT: I am also looking for a small group of testers.. both for MIUI stock ROM and AOSP based ROM's..
Click to expand...
Click to collapse
This is Miui V45 boot.img taken directly from zip recovery updater dropbox, will love to try it if you repack it
Hello devs, Is it possible to work on the lollipop kernel as we have a lollipop rom released for our device....
Really looking forward to that
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Users mostly search for Download Link so made a simple one
Key Features
-O3 , Cortex A7 , Graphite , neon , vfpv4 Optimizations
Compiled from SaberMOD GCC 4.10 Toolchain which is almost latest Toolchain with best optimizations
All New MSM_HOTPLUG driver from @myfluxi kernel
LCD KCAL Color Control ported from LG G2 code
Adaptive Voltage Scaling Support
Vibration Strength Control
Completely New msm_thermal code ported from franco kernel by @franciscofranco (Now you can Chill )
More CPU Governors ( ondemand , performance , conservative(updated) , powersave , ondemandplus , abyssplug , smartassH3 )
More I/O Schdedulers ( BFQ(v6) , Deadline , CFQ , ROW , SIO , FIOPS , No-op , V(R) , ZEN )
added new power management mode "PowerSuspend" (Hello Battery)
add official f2fs kernel support + f2s optimization
Improved vibration scheduling
added LZ4 compression (faster than LZO)
Frandom -Fast Kernel Number Generator driver added
[*]File systems support: Ext2/3/4, FAT32, NTFS, CIFS, USB OTG ,UDF
Debugging is OFF by Default to save CPU cycles, and extend battery life.
UKSM for Page Merging
SELinux optimization (faster SELinux!)
Mutex optimization (better multi-tasking)
Scheduler optimization (smoother multi-tasking)
Added cdrom option to UMS-lun-devices (Now you can mount internal memory as CD-ROM)
Enabled 8 new TCP Congestion controls viz. ( Westwood, Yeah, Cubic Veno,Vegas , BIC, Reno, HTCP )
Click to expand...
Click to collapse
Changelog:https://dl.dropboxusercontent.com/u/117413382/armani/changelog.txt
Click to expand...
Click to collapse
Downloads:
(XDA-Devdb):Mod Edit: Links removed
(Mirror to Dev-Host:Mod Edit: Links removed/QUOTE]
Installation:
Flash the compatibility patch from here
Then, Place the Kernel zip in the SDCard
and Flash it in recovery
Click to expand...
Click to collapse
Sources:
https://github.com/GuneetAtwal/kernel_h1s
Click to expand...
Click to collapse
F.A.Q. - Read this before complaining!
1. This kernel works on Y or X rom?
A: It is compatible with almost all Kitkat ROMs and i have persnally tested it on CM11 & Carbon ROM only and users on other ROM are on their own risk and complaining about the Kernel will not be tolerated..!
2. OMG Battery Sucks...!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
3. How do I flash this?
A: Reading the OP, theres a reason why I added instructions on it.
4. Which App is the best for Controlling the Kernel?
A: Their are many apps in the Play Store but i personally recommend TricksterMOD or FauxClock rest its on you whether which you find most comfortable.
5. Getting Random reboots..! Any Help
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
7. Which Settings are best for XYZ ROM and XYZ thing..!
A: THe Default settings of the Kernel are the best and Balanced one but you can ask other users on the thread or can discuss which settings are the best..!
8. XYZ Feature doen't work in this Kernel on XYZ ROM..! You suckass, fix it..!
A: I don't know who you are. I don't know what you want. If you are looking for a fix, I can tell you I don't have the solution. If you leave now, that'll be the end of it. I will not look for you, I will not pursue you. But if you don't, I will look for you, I will find you, and I ignore you.
9. My Kernel settings are not sticking and i have tried almost all the fu**in apps and none works..!
A: Have you installed busybox ? No? Then kindly install it and not every busybox installation is 100% complete so kindly keep that in mind before posting and beating a dead horse in the thread...!
Click to expand...
Click to collapse
Credits:
-faux123
-armani-devs
-every other dev whose code i incorporated in my kernel
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Note: Feel free to post anything even if it is OT i love to see Geekt Talks , Benchmarks , Discussion going over my Thread
I currently don't own this device so i can't answer all the device Specific Questions so you users help each other and make things easy for all of us.
Lets make a better community here on this Thread
Cheers..!
XDA:DevDB Information
Blaze™ Kernel for Armani, Kernel for the Xiaomi Redmi 1S
Contributors
GuneetAtwal
Source Code: https://github.com/GuneetAtwal/kernel_h1s
Kernel Special Features: Custom Hotplug and Thermal Driver , Better Battery Life
Version Information
Status: Nightly
Created 2015-01-22
Last Updated 2015-01-22
Click to expand...
Click to collapse
Reserved
..
Controllers
You can use Trickster MOD app to control all the functions of the kernel
you can download it here http://bit.ly/1lcuFGO
Click to expand...
Click to collapse
Some info on Governors and I/O Schedulers
http://forum.xda-developers.com/galaxy-s2/general/ref-kernel-governors-modules-o-t1369817
Reserved
Wii try it as I am on carbon ROM & according to op this kernel is compatible with it.
Thanks for awesome work
Update- working flawlessly in carbon rc5.now checking for features.
Sent from my Redmi 1S using Tapatalk
Working on PAC ROM
Working on PAC MAN ROM
Installed Kernel Compatibility Patch too
The features look awesome and promising
Thanks for this man!
Will report back after using it properly for a day or so
So far no reboots and all settings work properly
Sent from my Machine
kuldeepraj said:
Wii try it as I am on carbon ROM & according to op this kernel is compatible with it.
Thanks for awesome work
Sent from my Redmi 1S using Tapatalk
Click to expand...
Click to collapse
Don't forget to flash the compatibility patch before flashing this Kernel
P.S. Updated the Instructions too
Thank you...Hats Off!!!
Hi @GuneetAtwal,
Great Work Brother!!
I'm Trying It on My Own CrysTal ROM!!
Thanks A ToN!!
Sent Via Crystal ROM For Redmi 1S Using Tapatalk App
saksham.singh48 said:
Hi @GuneetAtwal,
Great Work Brother!!
I'm Trying It on My Own CrysTal ROM!!
Thanks A ToN!!
Sent Via Crystal ROM For Redmi 1S Using Tapatalk App
Click to expand...
Click to collapse
Always great to see old friends in my threads
Did not work with Mokee rom ver UNOFFICIAL by Sychost ( MK44.4-armani-201411280023-UNOFFICIAL) . It stuck at Mi logo.
LE . I didn't flash compatibility mod. I try that now,, -->> Not work even with compatibility patch.
Finally
Finally the wait is over Blaze is here
Proof of working on PAC ROM
Sent from my Transformer TF101
Great work,bro....................
nice to see you in redmi 1s original development and thanx for the awaiting kernel
pgreed said:
Did not work with Mokee rom ver UNOFFICIAL by Sychost ( MK44.4-armani-201411280023-UNOFFICIAL) . It stuck at Mi logo.
LE . I didn't flash compatibility mod. I try that now,, -->> Not work even with compatibility patch.
Click to expand...
Click to collapse
flash according to the instructions first flash compatibility mod then flash the kernel zip
Now do a clean flash and go acc. to the instructions i am sure it will work perfectly
sharan.nyn said:
Proof of working on PAC ROM
Sent from my Transformer TF101
Click to expand...
Click to collapse
Great Now do test everything and report back here then i will add the ROM name in F.A.Q.
4.10 toolchain is not the latest..GCC 4.10 was discontinued..and was re-initialized as GCC 5.0..
you're misleading..lol
proof: you can scan all branches if there was a 4.10 that went to production/development..
I am building my own toolchains for my projects and thats where my GCC builds come from with patches from Google's repo..
that's a bad habit of "copy pasting" ..moreover looking at your git..you copied my changes on thermal without even crediting me for adapting it to Armani..its not the original Thermal from Franco anymore as i made the adaptation..anyways..congrats..
kairi_zeroblade said:
4.10 toolchain is not the latest..GCC 4.10 was discontinued..and was re-initialized as GCC 5.0..
you're misleading..lol
Click to expand...
Click to collapse
I just copy pasted my previous thread LOL will edit it mate although not a big issue
Mirror please? XDA link seems to be slow; downloading at 31KB/s; Dev Host reloading the same page!!! Sorry to trouble you
add official f2fs kernel support + f2s optimization
Click to expand...
Click to collapse
So, this means I can now format my /data,/cache and /system to f2fs? (after converting the CM11 rom to f2fs obviously)
Although, this is a bit confusing:
File systems support: Ext2/3/4, FAT32, NTFS, CIFS, USB OTG ,UDF
Click to expand...
Click to collapse
Faced 2 reeboots in carbon ROM after flashing blaze kernel. One when installing busybox and another when opening trickster mod app also kernel settings changes to default after rebooting .
Sent from my Redmi 1S using Tapatalk
amangupta53 said:
So, this means I can now format my /data,/cache and /system to f2fs? (after converting the CM11 rom to f2fs obviously)
Although, this is a bit confusing:
Click to expand...
Click to collapse
yup although i haven't tested yet so don't try it now i will be trying it tomorrow and if it works will report in the thread or else will update the kernel
kuldeepraj said:
Faced 2 reeboots in carbon ROM after flashing blaze kernel. One when installing busybox and another when opening trickster mod app BTW kernel setting changes to default after rebooting .
Sent from my Redmi 1S using Tapatalk
Click to expand...
Click to collapse
just install the latest Trickster MOD app , for me the settings do stick i have just installed the latest version of the app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a slightly modified kernel based off of cm's new d851 kernel rebase: https://github.com/CyanogenMod/android_kernel_lge_g3/tree/cm-13.0
I wanted to build something that's basic and reliable. If you're looking for a highly modified kernel I recommend Eliminater74's Nebula Kernel: http://forum.xda-developers.com/lg-g3/development/kernel-nebulakernel-rev6-5-build20150715-t3161768
INSTALLATION
-------------------------
1. Make sure you know what your doing. If you're a noob then don't install this. I will not answer questions on how to install or fix your phone if you mess it up. Always backup first!
2. boot up into recovery.
3. flash the kernel zipped file.
4. Wipe cache.
5. Reboot.
EXP 03/09/2016 -
First EXP release:
based off of cm's latest d851 kernel
Optimized with -o3 and graphite
Compiled with 4.9 linaro a15 optimized toolchain
https://www.androidfilehost.com/?fid=24438995911974975
-------------------------------------------------------------------------
BTW I'm not held responsible if you brick your phone or you don't know what your doing.
-------------------------------------------------------------------------
Thanks to Tectas! Thanks to Skin1980! And also thanks to Savaco! And of course Faux123! All these guys are awesome kernel devs and I did borrow or used ideas/commits from them. And thanks to skyliner33v of team bliss for the tootsie pop banner!
And of course Eliminater74 for helping me with my mismatch errors.
Tootsie Pop source code:
https://github.com/https://github.com/aclegg2011/tootsie_pop_kernel_g3
XDA:DevDB Information
Tootsie-Pop Kernel, Kernel for the T-Mobile LG G3
Contributors
aclegg2011
Eliminater74
Created 2015-01-24
Last Updated 2016-03-09
Reserved
Reserved
Thank you for all your hard work and sharing your work
Good to see you expanding your horizons and delving into new challenges
If you guys use either kernel in any ROMs not listed just let me know and I'll add it to the compatibility list. If you're using the test kernel I just need to know if you get any kernel panics or boot loops. Thanks guys!
Going to put on the Pandas phone.. Evan after (clean) install of the new version he is crashing to blue/green screen.
budeone said:
Going to put on the Pandas phone.. Evan after (clean) install of the new version he is crashing to blue/green screen.
Click to expand...
Click to collapse
Which kernel and which ROM?
aclegg2011 said:
Which kernel and which ROM?
Click to expand...
Click to collapse
cm-Resurrection_Remix_LP_v5.3.1-20150122-d851.zip
Just installed stable and going to see what happens.
Stable is smooth and fast, great battery life.
Thanks to tootsiepop kernel and its author.
Currently running BlissPop 1/22 build with the experimental kernel. Flashed this morning before work so I haven't used my phone much since I flashed. I also have not had a chance to browse the thread regarding my issues. So for now....
First Impression - Smoooooth and quick just like Bliss should be.
Issue 1 - I had one kernel panic "BSOD" right before work. At the time I was playing with the Walkman music player port, which has been giving me issues. So it may have nothing to do with the ROM or kernel.
Issue 2 - my lg headset connects, but no music plays through the earphones.
Overall - VERY NICE WORK. No complaints at all, because I believe my issues are either my own fault or a CM issue.
Thanks for the upload aclegg
The stable and test kernel has been updated. Now on the test kernel we're testing the multirom patch. Remember to download the stable kernel in case the test kernel crashes!
I implemented the kexec patch in the new test build, but multirom says its not in the kernel. It could be because the kernel optimization levels are too high. Would you want to sacrifice smoothness for multirom support? I was able to get multirom working using a kitkat ROM as my primary with the skin kernel. And bliss pop is running with the speedy kernel as the second ROM just fine.
aclegg2011 said:
I implemented the kexec patch in the new test build, but multirom says its not in the kernel. It could be because the kernel optimization levels are too high. Would you want to sacrifice smoothness for multirom support? I was able to get multirom working using a kitkat ROM as my primary with the skin kernel. And bliss pop is running with the speedy kernel as the second ROM just fine.
Click to expand...
Click to collapse
I do not use multirom. Can you make a full featured version without multirom support and other stripped to support it?
aaanadie said:
I do not use multirom. Can you make a full featured version without multirom support and other stripped to support it?
Click to expand...
Click to collapse
I'm might not support multirom. The whole point of this kernel is to increase optimization without losing stability. Stripping out the optimizations just to add multirom would contradict why I decided to work on this kernel to begin with.
aclegg2011 said:
I'm might not support multirom. The whole point of this kernel is to increase optimization without losing stability. Stripping out the optimizations just to add multirom would contradict why I decided to work on this kernel to begin with.
Click to expand...
Click to collapse
+1
Please add faux sound
Upstreammiami said:
Please add faux sound
Click to expand...
Click to collapse
+1
Heh, I think someone once said this isn't Google+ so no need for a bunch of +1 posts. Use the Thanks button or whatever it's called. Serves same purpose. ?
Sent from my LG-D851 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING
Your warranty is now void. I am not responsible for anything that happens to your device, whether you miss your work alarm, or your phone catches fire! Permanent screen damage may always occur!
ROM Features:
-ROM uses CAF sources, which are much less hacky than our old JB sources and kernel is LP based
-ROM compiled with -O3 and UBERTC 4.8
-JustArchi's ArchiDroid Optimizations V4
-Built-in SuperSU v2.46
-Prebuilt Google WebView
-SQLite 3.8.10.2
-F2FS support
-Everything Euphoria-OS already supports!
Kernel Features:
-Based on CAF Kernel
-Patched up to 3.4.108
-CPU Governors: Alucard, Bacon, Impulse, Interactive, Nightmare, Ondemand, Pegasusq, Performance and Smartmax
-I/O Schedulers: BFQ, CFQ, Deadline, Fiops, Noop, Row, Sio and Zen
-Kernel compiled with UBERTC 5.1 and graphite flags
-Kernel compressed with lz4 for insanely fast boot times
-Kernel support for F2FS, Fast Charge, Sound Control, Simple GPU Algorithm and more!
-CPU overclocking to 2.6 GHz
-GPU overclocking to 650 Mhz and underclocking to 100 Mhz
-Voltage support
-Bricked thermal driver
-msm_hotplug
-Latest KCAL support
How to Install:
1. Download blastagator's latest TWRP
2. Do a complete wipe (/system, /cache, etc).
3. Flash LP Bootstack, then ROM, then GApps!
4. Reboot and enjoy!
Downloads:
LP Bootstack (Go into the lp folder of your variant and click "view raw" for the zip): https://github.com/lg-devs/bootstacks
ROM: https://www.androidfilehost.com/?a=show&w=files&flid=25170
GApps choice is up to you!
Special Thanks to:
-Euphoria-OS team
-lg-devs team for bases for the device trees
-Rashed97 for his work on the G2 trees
-DJLaMontagneIII, RenderBroken, REV3NT3CH, dorimanx, and savoca for their work on the G2 kernel
Thanks to all the other ROMs/teams out there!
XDA:DevDB Information
Euphoria-OS, ROM for the LG G2
Contributors
tsunamical, Rashed97
Source Code: http://www.github.com/Euphoria-OS-Legacy
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: LP Bootstack
Based On: CM 12.1 + CAF G2 Sources
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2015-06-22
Created 2015-05-22
Last Updated 2015-06-22
Frequently Asked Questions
What's the difference in your builds and dr87's builds?
dr87 builds with everything as close to stock Euphoria as he can. If you are a fan of his old Mahdi ROM builds, then you would really enjoy his builds. My builds use different toolchains, optimizations, and my kernel. Neither version is better than the other. I reccomend you give them both a whirl before settling down for one.
What kernels can I flash on this?
The ROM is using CAF sources, which means you cannot flash the CM12 versions of B14CKB1RD or Render's CM12 kernel. Current options are Llama kernel or stick with stock.
How do I flash this?
If you are coming from an older build:
Clean flash (/data, /system, /cache and dalvik, but NOT internal storage) -> Flash ROM -> Flash GApps -> Reboot
If this is the first time using any CAF based ROM (First time using Euphoria):
Clean flash (/data, /system, /cache and dalvik, but NOT internal storage) -> Flash LP bootstack -> Flash ROM -> Flash GApps -> Reboot!
Great job! I've been stalking you and a few others for a while now on github.
Is the GPS working without a stock LP base now? Do you have hangouts?
Choristav said:
Great job! I've been stalking you and a few others for a while now on github.
Is the GPS working without a stock LP base now? Do you have hangouts?
Click to expand...
Click to collapse
GPS is working. Only thing that shouldn't be working is USB-OTG. And you can find my Google+ profile through my XDA profile, or just look at the G2 section of the Euphoria-OS G+ page.
Also to others, VS980 build coming up tomorrow. Still waiting on bootstack for F320 before I put a build out for it, and waiting on actual Lollipop for D803 and LS980.
What does mean CAF based kernel? No need for JB bootloader a better battery/performance?? based on official LP kernel?
Flashing, will report.
Check dem Hangouts!
Gonna hose the vs980 eh Tyler!?
Just breaking your stones lol. Glad to see you getting back into the seat.
If you or zac need a vs980 tester let me know
Um.. Sprint lollipop has been released along with kernel code....
Sent from my LG-LS980 using XDA Free mobile app
Abrilabr said:
What does mean CAF based kernel? No need for JB bootloader a better battery/performance?? based on official LP kernel?
Click to expand...
Click to collapse
Will be adding to FAQ soon, but it stands for Code Aurora Forums, and CAF usually tends to use the latest things. The kernel is LP-based so you will NOT be able to flash the CM12 Render or B14CKB1RD. You should still be on the JB bootloader however.
Lawlrus said:
Gonna hose the vs980 eh Tyler!?
Just breaking your stones lol. Glad to see you getting back into the seat.
If you or zac need a vs980 tester let me know
Click to expand...
Click to collapse
Yep! And glad to see you back as well. Won't be needing any other testers unless I'm playing with kernel things, which when Render drops his CAF sources, I'll start building a standalone as well for other ROMs that switch over to the CAF base.
goast said:
Um.. Sprint lollipop has been released along with kernel code....
Sent from my LG-LS980 using XDA Free mobile app
Click to expand...
Click to collapse
Really? I haven't seen it yet. Once Rashed gets the adsp images and bootstack from it, I'll start building for it.
Abrilabr said:
What does mean CAF based kernel? No need for JB bootloader a better battery/performance?? based on official LP kernel?
Click to expand...
Click to collapse
Caf = Code Aurora Forum
Thanks for sharing with us @tsunamical! One question, after flashing the lollipop bootstack, if we want to go back to another rom, would we need to reflash the jb bootstack first? If we have a backup through twrp, would it restore the jb bootstack during restore?
bps119 said:
Thanks for sharing with us @tsunamical! One question, after flashing the lollipop bootstack, if we want to go back to another rom, would we need to reflash the jb bootstack first? If we have a backup through twrp, would it restore the jb bootstack during restore?
Click to expand...
Click to collapse
Depends on your device. The vs980 for example, can use the KitKat bootstack minus the radio and bootloader.
If you need to use it now, then yes, you would need to revert as the 5.0 radio shouldn't work with 4.2 kernel based roms
Twrp will be iffy with restores. Blastigator did add the option to save modem and sensor info in twrp with backups if you select it, I've not tested it myself, but on paper it should.
Edit: it would not save the bootstack
Really? I haven't seen it yet. Once Rashed gets the adsp images and bootstack from it, I'll start building for it.[/QUOTE]
Yep, I'm on it now... Well if u do get us a aosp lollipop rom using lollipop kernel and all that, you'll be the first
Sent from my LG-LS980 using XDA Free mobile app
So just to be clear, D800, we DO flash the lollipop bootstack, and radio?
jcmaddox1 said:
So just to be clear, D800, we DO flash the lollipop bootstack, and radio?
Click to expand...
Click to collapse
Just flash the bootstack and you should be set.
tsunamical said:
Just flash the bootstack and you should be set.
Click to expand...
Click to collapse
Flashed and booting! Optimizing apps! Woop Woop!
jcmaddox1 said:
Flashed and booting! Optimizing apps! Woop Woop!
Click to expand...
Click to collapse
May want to roll back for now, nasty bug found by someone, will be releasing new builds tomorrow with a fix included.
tsunamical said:
May want to roll back for now, nasty bug found by someone, will be releasing new builds tomorrow with a fix included.
Click to expand...
Click to collapse
Yeah - for me it's stuck at "starting apps" and the setup menu shows behind the popup, then crashes. Any way we could get a hotfix?
If i were to roll back - should I be using a jellybean or kitkat bootstack? or can i just leave as is for other roms such as Rashed97s CM12?
F320 can test .Are uploading?
jcmaddox1 said:
Yeah - for me it's stuck at "starting apps" and the setup menu shows behind the popup, then crashes. Any way we could get a hotfix?
If i were to roll back - should I be using a jellybean or kitkat bootstack? or can i just leave as is for other roms such as Rashed97s CM12?
Click to expand...
Click to collapse
It should optimize apps properly, but the bug totally screws SystemUI over, no hotfix since it was a library issue, just going to recompile and release a build tomorrow. I would go back to the JB bootstack until tomorrow unless you had a nandroid, and if you're using one of Rashed's CAF builds then yes you can leave it, but if it isn't explicitly labelled CAF, then no, reflash JB bootstack.
liusi522 said:
F320 can test .Are uploading?
Click to expand...
Click to collapse
I don't need any other testers and it will come out at another time, don't ask for ETAs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WELCOME TO ELITE KERNELS!
Our main goal behind building these kernels is to create a setup that gives a balance between performance and battery life without straying too far from stock. We like to have our cake and eat it too. Our kernels include performance, memory, and scheduling tweaks that enables your phone to come to the party when you are hammering down on it and need performance ASAP, and to go to sleep faster than a basset hound on a warm summer day. We put these kernels together mainly for our own use; so what we release is what we personally use. We hope you enjoy them too!
Elite Kernel Members
@buckmarble
@brymaster5000
Supported Device
htc_pmewl, htc_pmeuhl, htc_pmewhl (check ro.product.device in build.prop for compatibility)
Special Features (added to stock options)
Base
Linux 3.18.63
Many upstream patches to improve overall performance and security
EAS(separate build for this below)
Boot
Anykernel 2 installer - ramdisk edits that don't overwrite your current boot.img tweaks
Forced Encryption
Optimization
Neon
Official Linaro 6.1
CPU
Stock CFS
Overclock
Governors
Stock governors
IO Schedulers
NOOP
Deadline
CFQ
SIO
BFQ
FIOPS
Miscellaneous
Sweep2sleep
Frandom
Entropy Tweaks
Fsync
Advanced TCP Congestion Control
Upstream Linux patches
KCal Control
Blinking Light Notifications Credit @tbalden
Custom LED Notifications Credit @tbalden
Adreno Boost
Sound Control - Digital and Analog
DriveDroid support
Oreo 8.0.x
Elite_PME-O-03_11_2018
Nougat 7.0.x 2.x.x
Non-EAS Edition
Elite_PME-N-10_11_2017
EAS Edition
Elite_PME_N_EAS-02_01_2017.zip
Special Instructions for EAS use:
You must manually rename the texfat.ko file to texfat.ko.bak. It is located in system/lib/modules. If you do not rename this, your device will bootloop. Renaming this also affects the users who have an sd-card that is formatted as exfat. If you wish to use an sd-card with the EAS kernel, you must have a card that is formatted in a different format.
IMPORTANT: Once the phone is booted, you will have to change to the sched gov via a kernel app. If you do not, the cores will be stuck at max freq.
If you do not like the EAS kernel, to go back you must manually rename the textfat.ko.bak to textfat.ko, restore the boot img that came with the ROM you are on, and the new installer above will take care of the rest of the changes that were made for EAS.
The reason I did not automate the process of renaming the module is to make my users aware of the issue with the exfat sdcards. An alternative to make the exfat cards work is being researched.
Marshmallow 6.0.1 - 1.80.x + firmwares
Elite_PME-11_18_2016
Marshmallow 6.0.1 - 1.55.x and under firmwares
Elite_PME_M-08_18_2016_vzw
Marshmallow 6.0.1 - Sprint
Elite_PME_M-08_26_2016_spr
SUPERSEDED DOWNLOADS
Elite_PME-N-04_10_2017
Elite_PME_N_EAS-01_27_2017.zip
Elite_PME-N-01_23_2017_2
Elite_PME_N_EAS-01_25_2017.zip
Elite_PME-N-12_07_2016
Elite_PME_M-11_12_2016
Elite_PME_M-10_28_2016
Elite_PME_M-09_19_2016
Elite_PME_M-08_26_2016
Elite_PME_M-08_18_2016
Elite_PME_M-08_18_2016_spr
Elite_PME_M-08_10_2016
Elite_PME_M-08_10_2016_vzw
Elite_PME_M-08_02_2016_vzw_3
Elite_PME_M-08_02_2016_3
Elite_PME_M-08_02_2016_vzw
Elite_PME_M-08_02_2016
Elite_PME_M-07_26_2016_vzw
Elite_PME_M-07_26_2016
Elite_PME_M-07_17_2016_vzw
Elite_PME_M-07_17_2016
Elite_PME_M-06_28_2016_vzw
Elite_PME_M-06_28_2016
Elite_PME_M-06_23_2016_vzw
Elite_PME_M-06_23_2016
Elite_PME_M-06_22_2016
Elite_PME_M-06_08_2016
Elite_PME_M-06_01_2016
Special Thanks
@Eliminater74 for all his EAS work and permission to use this work
@flar2 for his wake gestures
@osm0sis for his anykernel2 setup
@bsmitty83 for helping your old B-Team member to get ak2 running
Our testers/friends - you know who you are...
BETA TESTING KERNELS
XDA:DevDB Information
Elite Kernel, Kernel for the HTC 10
Contributors
buckmarble, brymaster5000
Source Code: https://github.com/Elite-Kernels/HTC-10
Kernel Special Features:
Version Information
Status: Stable
Created 2016-06-03
Last Updated 2018-03-12
mine
buckmarble said:
mine
Click to expand...
Click to collapse
could be flashed on non verizon 10?
SacredDeviL666 said:
could be flashed on non verizon 10?
Click to expand...
Click to collapse
Yessir, two of my testers are non-vzw.
Heck ya!!!! Good stuff here!! Thanks for all the hard work! This thing truly rocks!!
Nice! Happy to see you on the 10
About time !!! - just kidding ---- Thanks!!
I got this, Hong Kong version, can flashing this kernel?
Sent from my HTC 10 using XDA-Developers mobile app
shukyuen said:
I got this, Hong Kong version, can flashing this kernel?
Sent from my HTC 10 using XDA-Developers mobile app
Click to expand...
Click to collapse
I don't know. I know the installer will fail, but you can change the device name in anykernel.sh to the uhl and try it.
Sent from my HTC6545LVW using Tapatalk
Awesome Buck in da house!! Great kernels ftw
Sent from my HTC 10 using XDA-Developers mobile app
Just realised that I didn't put a source link in the OP. It has been added
Sent from my HTC6545LVW using Tapatalk
@buckmarble Installed fine, so far so good. Is there an app you recommend to choose different schedulers and what not? How do I enable the sweep to sleep functionality? Thanks
wow, this feels just like m7 days. Did verizon source finally drop? Gonna go get my flash on, thanks @buckmarble and @brymaster50000
aer0zer0 said:
wow, this feels just like m7 days. Did verizon source finally drop? Gonna go get my flash on, thanks @buckmarble and @brymaster50000
Click to expand...
Click to collapse
I'm using the general unlocked kernel source that was released a couple weeks ago.
Sent from my HTC6545LVW using Tapatalk
Just to confirm before I flash, this does this break Android Pay?
Because I am a glutton for punishment, I will try this on Sprint tomorrow and report back.
HTC10
shukyuen said:
I got this, Hong Kong version, can flashing this kernel?
Click to expand...
Click to collapse
Did it work for you? I have the same by the way although I'm from Germany, equal models?
jhericurls said:
Just to confirm before I flash, this does this break Android Pay?
Click to expand...
Click to collapse
No it doesn't. AP works with this kernel
Sent from my HTC6545LVW using Tapatalk
Sweep2sleep not working for me. Any ideas? Bought/installed flar's EX kernel manager and tried all settings. No joy.
Light1984 said:
Sweep2sleep not working for me. Any ideas? Bought/installed flar's EX kernel manager and tried all settings. No joy.
Click to expand...
Click to collapse
I'm on stock vzw and it's working out of the box for me. Do you have any left over scripts or a ROM with an option to toggle it that would affect it?
Sent from my HTC6545LVW using Tapatalk