Develop Bugs

[Q] how to update arc 2.3.2 rooted and unlocked bootloder

Hi,
my arc have unlocked bootloder and i have rooted my android 2.3.2. the questions is can i upgrade my android with 2.3.3?
Thanks for replay.
Peter

Did you try
Edit: gave the most possible bad advise due to misreading.
Other way is to download seus, Sony Ericsson update service, and update through that, but for sure you lose your root rights than.
Further on all your answers will be here on the first page, so you could have done some reading first, than you would have found out asking this question is a bit ought...
sent from arc or optimus 2x

PollPixx said:
Did you try
Settings/about phone/
Software update, your phone will check if there is an update available.
With the ota, over the air, update you have a chance you still have a rooted phone.
Other way is to download seus, Sony Ericsson update service, and update through that, but for sure you lose your root rights than.
Further on all your answers will be here on the first page, so you could have done some reading first, than you would have found out asking this question is a bit ought...
sent from arc or optimus 2x
Click to expand...
Click to collapse
OTA for unlocked bootloaders will brick your phone. There is a fix for that now though.
Be careful of the advice you give.

You are right, I didn't read that, my apologise!!
sent from arc or optimus 2x

You have to install flashTool 0.2.9.1. http://forum.xda-developers.com/showthread.php?t=920746
Then get the updated firmware 3.0.1.A.0.145 or 146 https://rapidshare.com/files/4055154....146_Global.7z. You can keep your settings (option i FlashTool).
Then get the rootexperia.zip from Bin4ry http://forum.xda-developers.com/showthread.php?t=1130639 and flash it via recovery http://forum.xda-developers.com/showpost.php?p=14903452&postcount=169
Hope this helps

Just flash a 2.3.3 ROM (preferably rooted) with fastboot. Look in the Development section for a ROM. Its fairly easy.
http://forum.xda-developers.com/showthread.php?t=1044201
There lots of ROMs and a very good tutorial how to flash using fastboot.

very thanks i try

i have tray and work. Very thanks

[Q] Unlocking bootloader Xperia Play question

I bought a few weeks ago an Xperia Play locked on the 3 Network of UK. I removed the sim locked through one of the many sites that offer this service (htccode to be exact) and debranded it through wotanserver.com.
The problem I have is that I tried unlocking the bootlader of the device to no avail since I just can't enter fastboot mode no matter how many times I try (the blue light just doesn't light up). I've read quite a few other posts on this forum and a few other sites but I just can't find a clear answer as to why this is happening. I mean I unlocked the sim lock, I changed the firmware with a "clean one" and still it refuses to enter fastboot mode.
I tried rooting my phone through Gingerbreak or Superoneclick but they didn't work either. Is there any method (preferably an easy one) to root my phone? It's on Android 2.3.3.

Just a quick update to inform you that after a little more tinkering I managed to root my phone, and I might as well share with you how I did it.
Basically again using the wotanclient I returned my FW to 2.3.2 and tried Gingerbreak again. This time it worked like a charm! I also discovered that in 2.3.2 the 3g that didn't work on 2.3.3 now works like a charm so I might stuck with this FW for a while longer (maybe I will try 2.3.4 at some point as well).

Your bootloader is locked by your provider and it won't help unlocking the sim nor debrand it with flashing another FW. That's why it didn't help doing the stuff you did.
Look at this thread for unlocking the bootloader and accessing fastboot (it'll cost some money though, not much afaik):
http://forum.xda-developers.com/showthread.php?t=1232050
Further more gingerbreak/superoneclick etc. only works on gingerbread 2.3.2 as the loophole got patched in the higher builds. So if you want to retain root when updating do it by OTA or if you get fastboot going you can do it via CWM (clockworkmod) with a flashable .zip.
Regardcs Dousan.

Dousan said:
Further more gingerbreak/superoneclick etc. only works on gingerbread 2.3.2 as the loophole got patched in the higher builds. So if you want to retain root when updating do it by OTA or if you get fastboot going you can do it via CWM (clockworkmod) with a flashable .zip.
Regardcs Dousan.
Click to expand...
Click to collapse
or you can flash doomkernel (which has many advantages, but again, need to enable fastboot mode on your phone, to then unlock bootloader before you can flash the kernel)
i highly recomend using alejandrissimo's service. i did, and i've never looked back

Is there a way to downgrade my phone's fw if im on 2.3.3?

cj360 said:
Is there a way to downgrade my phone's fw if im on 2.3.3?
Click to expand...
Click to collapse
Yes there is mate. I take you have a R800i.
Go to the dev section and find a FTF file of FW build 2.3.2. Then grab flashtool 0.2.9.1 beta. Flash the FTF file and there you go. Downgraded and ready to root.
There's an easier way to root now, i take that's why you want to downgrade, just use the zergRush to do it. That works on any FW build. Check out the dev section for a thread about 'rooting with zergRush'.
Regards Dousan...

I forgot about the zergRush post cuz I bookmarked it but didn't read it that well. Are their bugs for doing it on the higher fw tho?

[Q] SE ARC help.

Hey all, I’m pretty new to this, have been reading throughout this forum and others for weeks. I got a few things I would REALLY appreciate some help with.
I have a SE ARC lt15A running 2.3.3 with 3.0.1.a.0.145 firmware. (I’m in Canada, phone is with Rogers) I bought it locked and unlocked it as I used it for a recent trip to europe no problem there.
It seems very slow like when I press the button for my contacts it takes about 5 seconds to open, so this brings me to where I am now, I’d like to put cyanogenmod on it and get rid of all the pre-loaded stuff.
Do I need to update the firmware before I put on cyanogenmod?
If so I can’t seem to get FastBoot to recognize phone.
But I can get Wotanserver to recognize my phone, there are different firmwares but none from Canada, can I use another region firmware on my phone and have it still work on with my carrier?
I don’t know if this matters but I was trying to flash firmware earlier and phone stopped working, was able to restore it with SEUS, can that lock my phone again?
Could be that i missed a thread that answers my questions, if so would appreciated being pointed in right direction.
Thanks again

homeygomey said:
Hey all, I’m pretty new to this, have been reading throughout this forum and others for weeks. I got a few things I would REALLY appreciate some help with.
I have a SE ARC lt15A running 2.3.3 with 3.0.1.a.0.145 firmware. (I’m in Canada, phone is with Rogers) I bought it locked and unlocked it as I used it for a recent trip to europe no problem there.
It seems very slow like when I press the button for my contacts it takes about 5 seconds to open, so this brings me to where I am now, I’d like to put cyanogenmod on it and get rid of all the pre-loaded stuff.
Do I need to update the firmware before I put on cyanogenmod?
If so I can’t seem to get FastBoot to recognize phone.
But I can get Wotanserver to recognize my phone, there are different firmwares but none from Canada, can I use another region firmware on my phone and have it still work on with my carrier?
I don’t know if this matters but I was trying to flash firmware earlier and phone stopped working, was able to restore it with SEUS, can that lock my phone again?
Could be that i missed a thread that answers my questions, if so would appreciated being pointed in right direction.
Thanks again
Click to expand...
Click to collapse
mate i have the same issue. the thing is that once we (you) bought the phone locked the bootloader is locked and it cant acces fastboot - even if u got the unlocking code and even if uwill flash debranded firmware. there is no way to do so now. all u can do is root it and get rid of some bloatware. - yes root it without unlocking the bootloader. check out android dev section and DOOM'S version for windows! perfect and easy.
thats the only thing u can do so far - the same as me. just wait.
thanks

What's doom's version for windows? Can you point me to it? Is it better/easier to use than Gingerbreak?
Also can i update the firmware with a different region without screwing up my phone/provider? Is it possible to get 2.3.4 on a branded phone or do i have to wait for SE to release it for my region?

homeygomey said:
What's doom's version for windows? Can you point me to it? Is it better/easier to use than Gingerbreak?
Also can i update the firmware with a different region without screwing up my phone/provider? Is it possible to get 2.3.4 on a branded phone or do i have to wait for SE to release it for my region?
Click to expand...
Click to collapse
here u go mate
http://forum.xda-developers.com/showthread.php?t=1320350
follow the instructions - this is the easiest root ever made for android!
hit the thanks button if i helped you!

homeygomey said:
What's doom's version for windows? Can you point me to it? Is it better/easier to use than Gingerbreak?
Also can i update the firmware with a different region without screwing up my phone/provider? Is it possible to get 2.3.4 on a branded phone or do i have to wait for SE to release it for my region?
Click to expand...
Click to collapse
Make a backup of your ROM with PC Companion or Update Service then flash the latest firmware and root.
You can flash any arc firmware onto any arc.

If you still want fastboot enabled then contact me

i did...thanks god u r here..

Thanks guys i'm installing Doomlord.
For anyone else like me who dont know much of what their doing, i flashed 2.3.4 US on my phone with wotan but then had to add apn for rogers to get 3G back.

[Q]

Help, I am a noob to this rooting and flashing stuff. I was able to succesfully root my phone. I have a Xperia Play r800x. I tried flashing [CDMA][ROM] R800x with UK firmware... I installed it through cwm xperia. after making backups and following instructions, my phone is stuck and the sony ericsson logo. It wont let me access the thing to use my backup. Please help me. Thank you.

Is your bootloader unlocked?

No it isn't. At first I was messing around with True ancestor rom, but it kept bootlooping. so I went back to my stock then found that one. and It said somewhere that it didnt need to be unlocked.

I managed to get my phone working with flashtool. now theres another problem. since it is a r800x, it would be verizon. but I have alltel. and the file i used to get into my phone was verizon. is there any way to change that? when i go to setting and network it says unknown. but it has all the verizon stuff. but is there away to recover my nandroid backup since it did have my alltel stuff?

problem upgrade firmware xperia arc

hi,
I got myself a sony ericsson xperia arc s
bought it in a store, doesnt belong to any carrier (I live in israel)
I tried upgrading to LT18i_4.1.A.0.562_NCB build,
but during the flashing process it gave me an error...
ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Final data verification failed
the installation didnt go through and when i tried turning on the phone it showed the "SONY" logo, and then a symbol of a triange and "!" and a symbol of a phone - then shuts down.
I tried to flash it again but nothing helped,
eventualy I downloaded LT18a arc s_2.3.4, 4.0.2.A.0.42_Generic USA Build
and flashed it, everything works "like a charm"
but I want to put ICS on it.... any suggestions? anything I could have done wrong?
B.T.W
in the "about phone" my model number is lt18a, and on the back of the phone its written lt18i
so which one is it?
the in advance, I realy hope its the right forum....

seems like u have older version of flashtools...to flash ICS, use the latest flashtools. older version cant flash ICS..and make sure data verification is unchecked..
and it really doesn't matter if it says lt18a or 18i...maybe u flashed lt18a firmware...u need to flash lt18i firmware...

it was clearly mentioned when .562 came out officially, that final verification should be unchecked....while flashing thru flashtool (a version below v.8)

so anyone else?
the two of you gave me 2 different answers,
I didnt use an older version of Flashtool, im using the latest 0.9
any other suggestions? I just dont want to mess up the phone...

why dont you try the latest 4.0.4 firmware?

do you think it will work? im afraid it would give me that weird screen again and I wont be able to turn on the phone again,
if im currently on a 2.3.4 usa generic, can flash the latest cm7? or jjhybrid aswell? or do i need to be on 4.0.4 build before i do it?

ok, so I downloaded LT18i_4.1.B.0.431_(1254-2184)
if i understand correctly its the latest 4.0.4 for xperia divices
my device SI is (1254-1958)
Im currently using (2.3.4, 4.0.2.A.0.42_Generic USA)
My device is rooted thx to DooMLoRD's rooting tool, and of cource its bootloader is unlocked.
so in anyones opinion, can I just flash the generic rom thats listed above?
pls answer,
thnks

yea man..u can flash any .431 firmware...use the latest firmware with data verification unchecked

Ok, good news!
Managed to flash the latest FW! Am currently on 4.0.4
Everything is smooth! Battery life seems to be a bit better but only time will tell...
Anyway thx for every reply!
Thread may be locked now...