Related
Hey. I was using a 5.0.1 GPE Rom on my M8 and decided to update both the firmware and the rom to 5.1
I Backed everything up and decided to, as usual, use adb to sideload the firmware to the phone. I did and everything went as expected. After I finished I rebooted to android. I get NFC service stopped working, System UI stopped working and I can't interact with the phone. My thought, well let's go to the recovery and flash a rom I have in my external SD card. No recovery to be found just a android guy belly up with a red ! sign on his belly.
So I thought, I lost my recovery due to the firmware flash, I had happened before, So i went online found a TWRP recovery and went to flash it. Reboot to fastboot USB mode, but then in adb I cannot see the device at all. "adb devices" shows and empty list. I tried my windows 7 laptop to the same result.
Can anyone PLEASE PLEASE help me, I'm kinda freaking out at this point and am running out of options
xsidex said:
..... Reboot to fastboot USB mode, but then in adb I cannot see the device at all. "adb devices" shows and empty list.
Click to expand...
Click to collapse
When in fastboot mode - run command fastboot devices
No adb when in fastboot mode
To flash a recovery (unlocked bootloader)
fastboot flash recovery nameofrecovery.img
ckpv5 said:
When in fastboot mode - run command fastboot devices
No adb when in fastboot mode
To flash a recovery (unlocked bootloader)
fastboot flash recovery nameofrecovery.img
Click to expand...
Click to collapse
Sometimes some outside thought can be just ridiculasly helpfull when you are stuck in a tiny issue.
Thank you so much Kind sir, my heart rate thanks you aswell.
What a silly mistake
Hi,
Since the rom ( http://forum.xda-developers.com/lg-g3/development/rom-resurrection-remix-lp-v5-5-5-t3198675 ) of my phone crashed. After reboot, the phone is blocked on LG logo. Now, i can't enter in recovery mode (or in the download mode) and when I start my phone, it's fixed on the LG for 5 to 10 minutes, and after that it goes to a terminal (started fastboot mode).
I have read several tutorials to use fastboot to flash the recovery to reinstall a rom, but i have a error when i tried to erase or flash the recovery partition.
I look on my phone, and this error appear : "failed to send erase grp start address".
what can i do to fix this error ?
Thanks.
up please
Use the "boot" command instead of "flash" and it should boot up into recovery or downloadmode, depending on which file you use
I tried but i am stucked on teamwin logo.
Which file do i use for download mode ?
Hard to tell, there are some laf.img files floating around on xda and google or even better, extract the laf.img from the stock kdz depending on your android version (for instance you flashed 6.0 you pick the 30b kdz and extract it with the firmware extraction tool)
I would suggest you to and try to use the boot command with them..
Be carefull, do not use the flash command until you found one that boots into downloadmode properly or you can loose your fastboot mode aswell
From then on you should be able to boot into the downloadmode and flash a new firmware via the lg flashtool
I need help please. What can i do to re install a rom ?
Does your PC recognise the port.?
I found tutorial under bender_007 signature. People seemed happy with tool.
http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants/
Doesn't hurt to read and ask some questions.
no i can't connect my phone with port. I think, i nned to correct the error with fastboot. (remote : failed to erase partition)
th0was said:
no i can't connect my phone with port. I think, i nned to correct the error with fastboot. (remote : failed to erase partition)
Click to expand...
Click to collapse
Can you elaborate, how exactly your phone crashed, it is very unlikely that it will mess all the partitions just by crashing the rom?
The rom crushed twice, and now i can not access to recovery to install a new rom. I only have access to the fastboot command. Adb not working.
I tried to boot on recovery.img, but it's not working.
Thank for your help.
Regards,
Help please ?
Today i can connected to my phone with ADB when i tape this fastboot command : fastboot boot ./recovery.img.
I can too go into my phone as root with adb command : adb shell.
i tried to push flash_image on my phone and use it, but it donesn't work.
how can i flash my phone with adb command ?
Hi!
Im trying to install this 4 files in bootloader mode but with no luck.
boot.img
cache.img
system.img
recovery.img
I go to bootloader mode with volume up+cable in and thne I open cmd and write "fastboot flash boot boot.img" I get waiting for device
I rebooted to philz mode and rebooted to bootloader and I still get the same message waiting for device
Any ides why?
Im in version 5.1.1
Thanks in advance!
SamBamBim said:
Hi!
Im trying to install this 4 files in bootloader mode but with no luck.
boot.img
cache.img
system.img
recovery.img
I go to bootloader mode with volume up+cable in and thne I open cmd and write "fastboot flash boot boot.img" I get waiting for device
I rebooted to philz mode and rebooted to bootloader and I still get the same message waiting for device
Any ides why?
Im in version 5.1.1
Thanks in advance!
Click to expand...
Click to collapse
Probably phone drivers. Easiest thing is download Flashtool, (Androxyde not Sony), then open drivers folder in Flashtool directory and run exe, then check boxes for 'fastboot', 'flash mode', and 'rhine'. Wait for successful install, then connect phone in fastboot mode, and wait for 'installing device's message, then click 'skip searching Windows update', and drivers will install. Then do fastboot flashes
So I tried to flash another rom by flashing TWRP and unlocking the bootloader, which worked and I then had installed Freedom Os. Then I locked the Bootloader to get the Message away, but know when you charge it or turn it on it is in an boot loop which repeats the Oneplus Logo what you normally see, but very short and after that it bobrates turns the screen off and it atart again. Or I can go into fastboot mode, but when I try to go into the recovery, it goes into the Boot Loop again. Is there a way to get the Original OS back? Ive already dopwnloaded it but I cant get in on there. Can you tell me how to fix it on my own?
[GUIDE] Mega Unbrick Guide for A Hard Bricked OnePlus 3 > METHOD 1
If you can access fastboot mode, connect the phone to a PC, then go to ADB and erase recovery using the command " fastboot erase recovery" and install TWRP 3.0.4-1 using the command " <fastboot flash recovery <recovery.zip/img> again.
Once you do that, boot into TWRP, go to wipe and wipe everything. Once you do that, transfer the stock OOS into the internal memory using copy-paste , then go to install , select the transferred file to install the OS or else go to advance setting in TWRP and select adb sideload and use the command "adb sideload <filename.zip>".
This should install the OS on the phone.
If you want to go complete stock, then you also need to install the stock recovery. Search the forum to get the relevent files or else you can download it from the OnePlus website and later on update to latest OS via OTA.
NEVER EVER LOCK THE BOOTLOADER , IF YOU'RE USING ANY ROM OTHER THAN STOCK OS AND STOCK RECOVERY
anup807 said:
If you can access fastboot mode, connect the phone to a PC, then go to ADB and erase recovery using the command " fastboot erase recovery" and install TWRP 3.0.4-1 using the command " <fastboot flash recovery <recovery.zip/img> again.
Once you do that, boot into TWRP, go to wipe and wipe everything. Once you do that, transfer the stock OOS into the internal memory using copy-paste , then go to install , select the transferred file to install the OS or else go to advance setting in TWRP and select adb sideload and use the command "adb sideload <filename.zip>".
This should install the OS on the phone.
If you want to go complete stock, then you also need to install the stock recovery. Search the forum to get the relevent files or else you can download it from the OnePlus website and later on update to latest OS via OTA.
NEVER EVER LOCK THE BOOTLOADER , IF YOU'RE USING ANY ROM OTHER THAN STOCK OS AND STOCK RECOVERY
Click to expand...
Click to collapse
Can you tell me how to go to adb? When doing it while being in fastboot I get the error "remote: Partition erase is not allowed"
revedar said:
Can you tell me how to go to adb? When doing it while being in fastboot I get the error "remote: Partition erase is not allowed"
Click to expand...
Click to collapse
Download Universal ADB software, download the latest version and install it.
TWRP 3.0.4-1
Official Oxygen OS 4.0.3
Official Recovery
Connect your phone to the PC and then navigate to installed folder, right click holding SHIFT key and select "Open command window here"
Inside command window type
adb devices
If all the drivers are installed properly, you should see you're device ID here.
then type
adb reboot bootloader
your phone will enter fastboot mode.
then type
fastboot devices
again you should see you're device ID here.
then follow the instruction , i've given earlier.
anup807 said:
Download Universal ADB software, download the latest version and install it.
TWRP 3.0.4-1
Official Oxygen OS 4.0.3
Official Recovery
Connect your phone to the PC and then navigate to installed folder, right click holding SHIFT key and select "Open command window here"
Inside command window type
adb devices
If all the drivers are installed properly, you should see you're device ID here.
then type
adb reboot bootloader
your phone will enter fastboot mode.
then type
fastboot devices
again you should see you're device ID here.
then follow the instruction , i've given earlier.
Click to expand...
Click to collapse
So i've downloaded the software, installed the driver and typed in cmd adb devices "adb devices List of devices attached" is returned, so it seems like there is going something wrong. Is it because the Driver is installed wrong or because "target reported max download size of 440401920 bytes
sending 'recovery' (22605 KB)...
OKAY [ 0.528s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.551s"
This is returned when trying to flash. Do I have to be in fastboot mode or something else to be able to follow your instructions? In Fast Boot is written that the Device State is locked and Secure Boot is enabled. I messaged Oneplus and hope they have a solution which can just unlock the Bootloader when being in fastboot mode, so everything is fine again. I hope you can help me, but I still wanna say thank your for now
Errr... fastboot can unlock the bootloader. fastboot oem unlock
emuandco said:
Errr... fastboot can unlock the bootloader. fastboot oem unlock
Click to expand...
Click to collapse
Thank you, but it dont works because i forgot to re-enable the oem modification and usb debugging in freedom os, maybe there is an option to do this without having this enabled but I didnt found it. So I wait for a helpful answer from somebody here or from Oneplus, I consider sending my smartphone to oneplus to let them repair it if I cant do it. Just saying that modding an S3, Asus transformer pad and nvidia shield is way easier.
never ever relock your bootloader while you in custom OS
oopstairs said:
never ever relock your bootloader while you in custom OS
Click to expand...
Click to collapse
Thank you for not helping me
revedar said:
Thank you for not helping me
Click to expand...
Click to collapse
Yeah I'm sorry I can't help you in your case. I'm just stating the fact. Sorry if I offended you.
Shouldn't it still be possible to reflash the properly signed official updates? TBH I never had such a problem and thus never had to cope with it. Same with recovery: http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img Try flashing this one with fastboot. It's the official one. By flashing this one you might fix your stuff over adb sideloading the official full update zips.
Try the unbrick guide provided in the 2nd post to your query. It should definitely help. Better contact OnePlus tech2 support and they'll flash your phone for you. They're really helpful.
emuandco said:
Shouldn't it still be possible to reflash the properly signed official updates? TBH I never had such a problem and thus never had to cope with it. Same with recovery: http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img Try flashing this one with fastboot. It's the official one. By flashing this one you might fix your stuff over adb sideloading the official full update zips.
Click to expand...
Click to collapse
I already tried to do this, but the console returns something like permission denied.
anup807 said:
Try the unbrick guide provided in the 2nd post to your query. It should definitely help. Better contact OnePlus tech2 support and they'll flash your phone for you. They're really helpful.
Click to expand...
Click to collapse
The MSM Software disconnects the smartphone while the process works
U cannot flash in adb while the bootloader is locked, u can not unlock the bootloader unless u can access ur OS, I am not sure y people was trying to get u to flash via fastboot the answer was provided to u in the 2nd post
^^^ This!
It's pretty much obvious fastboot flash will not work with a locked bootloader.
It's pretty obvious unlocking the bootloader will not work, while one can not access the OS.
Unbrick tool is the only option to bring it back to life, or sending it for RMA. If unbrick tool fails, try using different drivers and make sure it is connected with the stock cable (I've only tried with a Nilkin cable besides the stock one, which always failed at different stages during the process).
Not even sure drivers must be installed manually, I've never done that myself on Windows 10, as they were automatically installed (3 different's PC's, both on x86 and x64).
Which version of stock firmware did you last have? If it was 4.0.1 or earlier, then you can use
Code:
fastboot oem 4F500301
to issue a flash command even without unlocking the bootloader. If you are on that, then use that command and flash stock recovery and then flash stock zip.
rk2612 said:
Which version of stock firmware did you last have? If it was 4.0.1 or earlier, then you can use
Code:
fastboot oem 4F500301
to issue a flash command even without unlocking the bootloader. If you are on that, then use that command and flash stock recovery and then flash stock zip.
Click to expand...
Click to collapse
I had the most recent update installed. Is there a similar command at the moment?
revedar said:
I had the most recent update installed. Is there a similar command at the moment?
Click to expand...
Click to collapse
Don't think so.
hi devs
i flashed accidentially Chinese recovery rom on my whyred now i m unable to switch from Chinese to global version as i tried every method fastboot,recovery,qfil,mi flash and edl mode i mean every possible way but all in vain as every method ended with error and my fastboot command is locked.
so what can i do please suggest me
it's Chinese miui 11
guys please help me i m frustrated tried every available method on internet downloaded tons of file.
aliasgertaj said:
guys please help me i m frustrated tried every available method on internet downloaded tons of file.
Click to expand...
Click to collapse
What you are trying to do? Just switch from Chinese to Global? or your device is bricked now?
What did happen after that you flashed the Chinese recovery ROM?
What modes do you have available?
Did you unlock bootloader previously?
SubwayChamp said:
What you are trying to do? Just switch from Chinese to Global? or your device is bricked now?
What did happen after that you flashed the Chinese recovery ROM?
What modes do you have available?
Did you unlock bootloader previously?
Click to expand...
Click to collapse
i m not bricked as my device is working fine
but now no fastboot command working i m not able to flash custom recovery
i tried fastboot method , used miflash method every miflash from old to newest , qfil edl mode method with miflash and qualcomm flash tool
i m just able to switch between china stable n developer rom
if i m able to unlock ma fastboot command then i can flash atleast custom recovery .
kindly help me as all method ended up every time with diffrent error.
aliasgertaj said:
i m not bricked as my device is working fine
but now no fastboot command working i m not able to flash custom recovery
i tried fastboot method , used miflash method every miflash from old to newest , qfil edl mode method with miflash and qualcomm flash tool
i m just able to switch between china stable n developer rom
if i m able to unlock ma fastboot command then i can flash atleast custom recovery .
kindly help me as all method ended up every time with diffrent error.
Click to expand...
Click to collapse
Fastboot flashing commands won't work if you have bootloader locked.
Did you unlock bootloader previously and probably get locked again?
Did you enable all the proper options on Developer section, i.e. USB debugging and check if device is recogniced on adb commands?
What do you get with "fastboot getvar all"?
subwaychamp said:
fastboot flashing commands won't work if you have bootloader locked.
Did you unlock bootloader previously and probably get locked again?
Did you enable all the proper options on developer section, i.e. Usb debugging and check if device is recogniced on adb commands?
What do you get with "fastboot getvar all"?
Click to expand...
Click to collapse
thanks a lot dude i m on unlock boot loader .
But bootloader some time works means sometimes it shows my device name after available device command it shows only ???????? Fastboot devices
i tried all way possible but none of them worked.
And i m unable to switch from china to global.
Only i can do is switch between china stable to developer.
i tried getvar command but it gave me this
PS C:\adb> adb reboot bootloader
error: device '(null)' not found
PS C:\adb> fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 5.007s
PS C:\adb>
aliasgertaj said:
i tried getvar command but it gave me this
PS C:\adb> adb reboot bootloader
error: device '(null)' not found
PS C:\adb> fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 5.007s
PS C:\adb>
Click to expand...
Click to collapse
And you said you enabled USB debuging?!? you didn't. First enable it under development tools.
MAKE SURE YOUR USING RIGHT ADB/FASTBOOT TOOLS AND DRIVERS.
After 'adb reboot bootloader' use 'fastboot devices'. You can change usb cable and if you still get errors try using usb hub.
If all above fails than try it on WIN7 PC.
aliasgertaj said:
thanks a lot dude i m on unlock boot loader .
But bootloader some time works means sometimes it shows my device name after available device command it shows only ???????? Fastboot devices
i tried all way possible but none of them worked.
And i m unable to switch from china to global.
Only i can do is switch between china stable to developer.
Click to expand...
Click to collapse
aliasgertaj said:
i tried getvar command but it gave me this
PS C:\adb> adb reboot bootloader
error: device '(null)' not found
PS C:\adb> fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 5.007s
PS C:\adb>
Click to expand...
Click to collapse
I think you are not properly booted to the proper state while you're trying certain commands. Just to be clear; adb works while your device is power on and fastboot commands will work only while your device is in fastboot mode not while on adb mode. A way to be sure that you are doing properly is enabling USB debugging first but while connected device with PC, a prompt will appear from device screen and then tap on "always allow", then you have to type "adb devices" and follow step by step, if device is recognized you can go to the next step with "adb reboot bootloader" then in fastboot you have to see the bunny otherwise is not properly in fastboot mode, then you can follow with "fastboot devices" and so on, keep in mind that any command will work until device is properly recognized.
SubwayChamp said:
I think you are not properly booted to the proper state while you're trying certain commands. Just to be clear; adb works while your device is power on and fastboot commands will work only while your device is in fastboot mode not while on adb mode. A way to be sure that you are doing properly is enabling USB debugging first but while connected device with PC, a prompt will appear from device screen and then tap on "always allow", then you have to type "adb devices" and follow step by step, if device is recognized you can go to the next step with "adb reboot bootloader" then in fastboot you have to see the bunny otherwise is not properly in fastboot mode, then you can follow with "fastboot devices" and so on, keep in mind that any command will work until device is properly recognized.
Click to expand...
Click to collapse
thanks bro
yesterday i used xiaomitool v2 as it reboot automatically device in fastboot mode but as i said after in fastboot mode it doesn't boot in adb mode.
and what is proper method to open fastboot mode i m doing it by holding power and volume down button.
drnightshadow said:
And you said you enabled USB debuging?!? you didn't. First enable it under development tools.
MAKE SURE YOUR USING RIGHT ADB/FASTBOOT TOOLS AND DRIVERS.
After 'adb reboot bootloader' use 'fastboot devices'. You can change usb cable and if you still get errors try using usb hub.
If all above fails than try it on WIN7 PC.
Click to expand...
Click to collapse
thanks for response bro
i did it under developer option and trusted my computer connection also and install adb fastboot devices many time changed cable and port but nothing happen. i tried fastboot files of china stable rom but it also doesn't worked
aliasgertaj said:
thanks bro
yesterday i used xiaomitool v2 as it reboot automatically device in fastboot mode but as i said after in fastboot mode it doesn't boot in adb mode.
and what is proper method to open fastboot mode i m doing it by holding power and volume down button.
Click to expand...
Click to collapse
Just trying to determine what your words exactly mean when you say "after in fastboot mode it doesn't boot in adb mode." ... without entering in more technical insights adb works when device is on, no sense to boot to fastboot to try to boot to adb after that (?)
If you can boot to fastboot what you have to try firstly is unlock bootloader or be sure that is already unlocked using
Code:
fastboot oem device-info
if your device is or get unlocked then you can try to flash or just boot to a custom recovery but if you can't determine until now if your device is really unlocked then you couldn't go further.
The hardware method to enter to fastboot is from a device off; pressing both pwr and vol down buttons but if the bunny is not displayed probably you didn't really get fastboot mode.
SubwayChamp said:
Just trying to determine what your words exactly mean when you say "after in fastboot mode it doesn't boot in adb mode." ... without entering in more technical insights adb works when device is on, no sense to boot to fastboot to try to boot to adb after that (?)
If you can boot to fastboot what you have to try firstly is unlock bootloader or be sure that is already unlocked using
Code:
fastboot oem device-info
if your device is or get unlocked then you can try to flash or just boot to a custom recovery but if you can't determine until now if your device is really unlocked then you couldn't go further.
The hardware method to enter to fastboot is from a device off; pressing both pwr and vol down buttons but if the bunny is not displayed probably you didn't really get fastboot mode.
Click to expand...
Click to collapse
i m frustrated now tried all the thing tried official flash tool official build but even official build by miflash official latest tool unable to flash image
i bought my device to official xiaomi service center they told it will be done in an hour but after couple of hour they returned my phone that it cant be updated.??????
shame on xiaomi that they implemented a method that they themselves also don't know how to revert it.
aliasgertaj said:
i bought my device to official xiaomi service center they told it will be done in an hour but after couple of hour they returned my phone that it cant be updated.??????
shame on xiaomi that they implemented a method that they themselves also don't know how to revert it.
Click to expand...
Click to collapse
Do yo use WIN10? Find PC with Win7... and install adb/fastboot app and drivers. Than try..
Is your system working now?
Just unlock your bootloader and install OrangeFox recovery than you can flash whatever you need.
Problem solved.
drnightshadow said:
Do yo use WIN10? Find PC with Win7... and install adb/fastboot app and drivers. Than try..
Is your system working now?
Just unlock your bootloader and install OrangeFox recovery than you can flash whatever you need.
Problem solved.
Click to expand...
Click to collapse
ok bro i will try today with another pc and update you
aliasgertaj said:
ok bro i will try today with another pc and update you
Click to expand...
Click to collapse
thanks installed twrp on other pc running on windows 7 but now internal storage goes 0mb unable to mount system
aliasgertaj said:
thanks installed twrp on other pc running on windows 7 but now internal storage goes 0mb unable to mount system
Click to expand...
Click to collapse
Wtf .. what's wrong with you.. you did everything we said wrong... Where and when did I told you to install TWRP????
I'm done with you...
Good luck with china ROM.
Ignorance is a bliss.
drnightshadow said:
Wtf .. what's wrong with you.. you did everything we said wrong... Where and when did I told you to install TWRP????
I'm done with you...
Good luck with china ROM.
Ignorance is a bliss.
Click to expand...
Click to collapse
thanks dude i installed twrp wipe my internal storage there is some error then some tricks goes perfect as i supposed and woohaa i installed masik port edition and now my phone works fine.
aliasgertaj said:
thanks dude i installed twrp wipe my internal storage there is some error then some tricks goes perfect as i supposed and woohaa i installed masik port edition and now my phone works fine.
Click to expand...
Click to collapse
TWRP can't bypass encryption, when you have no access to read data (0mb) then you have to format it, to avoid that is always recommended use OrangeFox, just for future reference, if you understand that you can flash OrangeFox through TWRP for better experience.
Also you can use this tool to help you to automate some stuff https://github.com/Szaki/XiaomiADBFastbootTools