Develop Bugs

The article for the NEW BIE'S of DELL STREAK

HOPING IT MIGHT HELP....!!!!!
IF IT DOES DUN FORGET TO THANK....
Here is an article which will be discussing all about the rooting the device, getting streak mod recovery menu, flashing customised ROMs and lastly How to get wicked customised BOOTANIMATION uploaded on the customised ROMs.
BUT BEFORE I PROCEED ANY FURTHUR I MIGHT WARN YOU THAT ALL THE STUFF MENTIONED BELOW WORKED FOR ME AND HENCE FORTH IM PASTING IT BUT WHEN UR FOLLOWING THE INSTRUCTIONS BE SPECIFIIC TO THE POINT AND FOLLOW IT AND YOU AR DOING IT ON YOUR OWN RISK I AM NO ONE TO BE BLAMED IF YOU MESS IT UP.IF STILL YOU WANNA BLAME ME SURE YOUR ARE WELCOME.
Now this article will be one stop for everything when the word customisation comes to your mind
and its the result out of my research on all the informations provided on the inetrnet not only on the XDA DEVELOPERS but else whr too. Without wasting much time lest proceed.
1. ROOTING YOUR DELL STREAK :
Downloading the file : http://forum.xda-developers.com/showthread.php?t=1044765
Video For Reference : http://www.youtube.com/watch?v=Hifk15SbHVQ
ROOTING THE DEVICE WILL VOID YOUR WARRENTY
About :
The GingerBreak APK is a wrapper around the newly released GingerBreak exploit (credits to The Android Exploid Crew), which is meant to attain root access on GingerBread. This specific exploit*may*work on various Froyo and Honeycomb versions as well.
What the APK and exploit do is as follows:
- The APK puts the right files in the right place to run the exploit
- The APK runs the exploit
- The exploit attempts to attain root access
- If it succeeds, the exploit remounts /system as read-write and runs the installer script
- The installer script attempts to install the su binary and superuser APK, and reboots
Some important things to know:
- You must have USB debugging enabled on your device
- You need to have an SD card (formatted and) inserted - if it doesn't work, try formatting the SD card in your computer, or switching it with a different (or old, etc) SD card
- The APK must be installed to device, NOT SD card
- The exploit may take a while to run, but not more than 10 minutes, if it does, get me a logcat, and reboot the device. In rare occasions, even if the device does not reboot, you may still have root. So check that out after you manually pull battery after 15 minutes or so of being stuck.
- Always reboot between root attempts!
- While (temporary?) root access may be attained, due to locked bootloaders, efuses, S-ON, and whatnot this may still not work on your device. For temproot purposes, use the raw binary exploit (linked below), not this APK.
- The GingerBreak exploit should not be used to attain temproot and continue using the device. It fscks vold, you do not want to be running like that. You want to reboot! So if the root doesn't stick, you (still) have a problem.
Installation :
- Make sure USB debugging is enabled
- Make sure you have an SD card (formatted and) inserted
- Get the APK on the phone somehow, and install it
- Open the APK, press the root button
- Wait a few minutes. If there are no problems, the device will reboot (note that the reboot itself can take like 10 minutes due to cache wipe)
- Make sure the Superuser app is install and working
- Optional: Install BusyBox from Market (I personally prefer the stericsson installer)
- Optional: Uninstall GingerBreak, you don't need it on your phone anymore
WARNING: Apparently on some devices the root exploit causes the SD card (internal or external) to be formatted. Also, if it gets stuck but you do see the card mounting/unmounting, try formatting your SD card yourself and try again (or use a different SD card) - often this works*.
However there are many other applications to root the phone but the gingerstreak was the one worked for me and i used .you can check on net and will get other applications too eg: SUPERONECLICK,etc.
2. Getting the streakMOD Recovery menu :
DOWNLOAD FILE : http://forum.xda-developers.com/showthread.php?t=840326
Note : in the streamMod recovery menu to navigate up and down use the volume rocker keys and to select use the camera button.
HOW TO INSTALL THE RECOVERY :
Step 1: Unzip and flash with: fastboot -i 0x413c flash recovery recovery.img
Step 2: Reboot with: fastboot -i 0x413c reboot
Step 3: Hold down the keys "volume up" and "volume down" simultaneously while the device is rebooting.
Step 4: Select "Software upgrade via Update.pkg on SD Card" in the menu
Step 5: At the Dell Logo press the power button and you will be presented with the Recovery Menu
Now all the newbie will be having only one question in mind what does the term FLASH here refers to...i was also struck by the same...Honestly, it took me one week to crack that term.
Here s the answer :
FLASHING is nuffin but running a handfull of commands which i will be providing you you can just copy and paste it but the way you write and run those commands it the real deal.
Link for streakmod revovery resource:
Link: http://forum.xda-developers.com/showthread.php?t=840326
Steps OF Flashing (FOR WINDOWS USERS) :
CONSIDERING YOU HAVE ALREADY ROOTED YOUR DEVICE
STEPS TO BOOT INTO RECOVERY :
LINK : http://www.youtube.com/watch?v=S23rGZVOKrE&feature=context-chv
THE ABOVE LINK IS JUST TO ASSIST YOU HOW TO BOOT INTO FASTBOOT MODE HOWEVER IT SHOWS THE WAY OF FLASHING THE STREAKMOD RECOVERY WHICH DIDNT WORK FOR ME.
Step 1: MAKE SURE THE USB DEBUGGIN IS ENABLED.
Step 2: TURN OFF THE DEVICE REMOVE THE BATTERY FOR ABOUT 5 SECONDS AND REPLACE IT.
STEP 3: PRESS THE CAMERA AND THE POWER BUTTON AT THE SAME TIME AND KEEP IT PRESSED UNTIL A WHITE SCREEN WILL APPEAR.
STEP 4: IT WILL BE SHOWING “WAIT FOR SD DETECT” THEN AFTER THE MENU COMES UP ON THE SCREEN WAIT FOR LIKE 15 SECONDS APPROX
STEP 5: CONNECT YOUR DEVICE(DELL STREAK) TO THE PC AND THEN PRESS FASTBOOT OPTION ON TOP RIGHT CORNER OF THE SCREEN.
STEP 6: THEN WAIT FOR LIKE ANOTHER 15 SECONDS AND FOLLOW THE PROCEDURE PROVIDED BY ME OR IN THE VIDEO LINK I HAVE POSTED ABOVE...ITS COMPLETELY YOUR CALL.
NOTE : clockworkMOD WORKS ON ANOTHER ANDROID DEVICES BUT streakMOD Revovery works on DELL STREAK
Step 1: You need fastboot/ADB tools http://mirror2.streakdroid.com/manii/Tools/Fastboot+ADB.zip
Step 2: Unzip to a folder; say C:\Fastboot+ADB
Step 3: StreakMod recovery: Download the file recovery-v0.3.2.8-beta.zip (3.57 MB) http://forum.xda-developers.com/showthread.php?t=840326. Unzip and copy ‘recovery.img’ *to fastboot tools directory*(i.e. C:\Fastboot+ADB\Win32\recovery.img)
Step 4: Now Open the command prompt and by using the 'ls' command and 'cd' command navigate to the folder and your command prompt line show b exactly like C:\Fastboot+ADB\Win32\>
Step 5: Now copy and paste the command fastboot -i 0x413c flash recovery recovery.img, and you will find the mobile screen changes and desplayes something with an exclamation mark at the end....it means the Recovery image that needed to be flashed is done.
Step 6: Now all you need is to enter the next command in the command prompt on your computer screen fastboot -i 0x413c reboot
while the device reboots itself hold the VOLUME UP AND VOLUME DOWN or simple the VOLUME ROCKER keys.
link for using instructions on screakmod :
Link : http://www.rdtk.net/2011/06/25/using-streakmod-recovery/#Installing-StreakMod-Recovery
NOW IF YOU HAVE TO HAVE TO FLASH THE BASE BAND (OPTIONAL) :
Note : IT TOTALLY DEPENDS ON THE CUSTOMISED ROM YOUR ARE FLASHING SOME ROMS eg : DJ steven's GingerStreak 2.4.4 required you to flash both the DSP and the baseband Whereas if you are going to flash the Ten's Longhorn 2.9.1 as its the latest it wouldnt require the flashing.
Incase you hav to flash the DSP and baseband
Link : http://forum.xda-developers.com/showthread.php?t=1333010
Note : Go to the page and download the link of the DSP and AMSS proovided on the bottom of the page and then do exactly instructed :
Step 1: You need fastboot/ADB tools http://mirror2.streakdroid.com/manii/Tools/Fastboot+ADB.zip
Step 2: Unzip to a folder; say C:\Fastboot+ADB
Step 3: StreakMod recovery: Download the file recovery-v0.3.2.8-beta.zip (3.57 MB) http://forum.xda-developers.com/showthread.php?t=840326. Unzip and copy ‘recovery.img’ *to fastboot tools directory*(i.e. C:\Fastboot+ADB\Win32\recovery.img)
Step 4: Now Open the command prompt and by using the 'ls' command and 'cd' command navigate to the folder and your command prompt line show be exactly like C:\Fastboot+ADB\Win32\>
Step 5: Enter the command “fastboot -i 0x413c flash amss amss.mbn” copy and paste it without the inverted commas in the command prompt to flash the baseband and phone screen will show a line ending with exclamation.
Step 6: Enter the command “fastboot -i 0x413c flash dsp1 dsp1.mbn” copy and paste it without the inverted commas in the command prompt to flash the DSP and phone screen will show a line ending with exclamation.
Step 7: Enter the command “fastboot -i 0x413c reboot” inroder to reboot the device and hold the voluem rocker keys as adviced earlier to enter into the streakMod Revovery menu.
Procedure to upgrade to a customised rom :
link of video for assistance : http://www.youtube.com/watch?v=3izgMselF-k&feature=plcp
NOTE :
1. Follow every instruction provided to the point mentioned by the DEVELOPER specified on the page for PRE-installation,POST-installation requirements and procedures.
2. YOUR DEVICE IS YOUR RESPONSIBBILITY.NO ONE IS FORCING YOU TO UPGRADE TO A CUSTOMISED ROM.IF U BREAK OR END UP SCREWING YOUR DEVICE I AM NOT RESPONSIBLE ITS YOU ALONE WHO IS TO BE BLAMED.
Installation procedure :
1. Download the .zip file and without making any changes dont even rename it save it anywhere on the SD card.
2. TURN your device off.
3. While rebooting it hold the power button until the LED comes up i.e the softkey light and then leave the power button and hold the volume rockers and you will be taken to the black screen having three options .(FOR DELL STREAK)
4. For navigation use the volume rocker button and for selecting an option use the camera button.
5. Select "Software upgrade via Update.pkg on SD Card" in the menu
6. Go to the link provided for furthur assistance.
LINK FOR THE DJ STEVEN'S GINGER STREAK 2.4.4 :
Link : http://forum.xda-developers.com/wiki/Dell_streak_5/ROMs
Link for installation procedure : http://forum.xda-developers.com/showthread.php?t=1333010
ISSUES:
Issue i faced after flashing the above ROM was i wasnt able to check my balance nor i was able to rechange my phone it was coming up with the error Invalid Code or CMMI error.
Follow the below link for resolution :
ISSUE FIX Link : http://techienetizen.blogspot.com/2012/05/dell-streak-5-ussd-code-problem-fix-for.html
Steps for FIXING the issue:
1. Download the .zip file and place it anywhere on the Sd card of the phone.
2. Turn off the device and reboot it into revocery by selecting the option "Software upgrade via Update.pkg on SD Card" in the menu
3. In recovery menu select upgate using update.zip
4. In the next screen select choose the zip file
5. Next screen will show all the files present in the SD card select the USSD_fix file you have downloaded
6. Select the opetion install from USSD_fix.zip file
7. The process will run and once its done
8. will promt your and just navigate back using the back button on the softkey on dell streak
9. Select the option reboot the phone now.
Hopefully the issue for me was resolved and i wish so will it be for you aswell.
LINK FOR LONGHORN 2.9.1 :
Link : http://forum.xda-developers.com/wiki/Dell_streak_5/ROMs
Link for installation procedure : http://forum.xda-developers.com/showthread.php?t=1355878
ISSUES:
The only issue i have faced after flashing Longhorn 2.9.1 was on my first start up after upgrade my device was just stuck & circelling on the bootanimation i.e., “XBOX360”
RESOLUTION:
Try longhorn 2.7 first and then wipe data/factory reset , wipe dalvik cache and do dell factory default too...
if it manages to go into lockscreen... you can then try to flash longhorn 2.9 and guess what it worked for me and incase you may experience this issue hope it resolves yours too.
Steps for FLASHING the .zip files by streamMod revovery menu:
1. Download the .zip file and place it anywhere on the Sd card of the phone.
2. Turn off the device and reboot it into revocery by selecting the option "Software upgrade via Update.pkg on SD Card" in the menu
3. In recovery menu select upgate using update.zip
4. In the next screen select choose the zip file
5. Next screen will show all the files present in the SD card select the .zip file you have downloaded
6. Select the opetion install from .zip file
7. The process will run and once its done
8. will promt your and just navigate back using the back button on the softkey on dell streak
9. Select the option reboot the phone now.
THE ABOVE SPECIFIED STEPS ARE COMMON FOR ALL THE LINKS PROVIDED
LINKS OF ISSUE:
Please check the page 41 for screen auto rotate issues
Link : http://forum.xda-developers.com/showthread.php?t=1355878&highlight=portrait&page=41
Please refer page 47 for to set portrait as the default screen orientation
Link : http://forum.xda-developers.com/showthread.php?t=1355878&page=47
For LED Notification and camera FIX for longhorn 2.9 please refer page 64
Link : http://forum.xda-developers.com/showthread.php?t=1355878&page=64
Link for wifi fix for longhorm 2.9.1 please check the below page 66
Link : http://forum.xda-developers.com/showthread.php?t=1355878&page=66
Patch for longhorm 2.9.1 please check the below page 75
Link : http://forum.xda-developers.com/showthread.php?t=1355878&page=75
LINKS OF SOME BOOTANIMATIONS:
dell streak logos bootanimation please check the below link
Link : http://forum.xda-developers.com/showthread.php?t=1823825
Ice cream snadwich bootanimation please check the below link out
Link : http://forum.xda-developers.com/showthread.php?t=1298338
- A NEWBIE

[Q][SM-T800] What is the best way to Downgrade 5.0.2 back to KitKat?

Hi, Just like the title says, I have the 10.5 tab, I'm currently on the us ota for 5.0.2 rooted. I was wondering what the best and safest way to downgrade was? I'm having alot of problems with 5.0.2. I mean it runs smoothly and everything it's just alot of the games i play that worked great on kitkat no longer work on lollipop they just crash when i try to open them. Also there is no wanam xposed for 5.0.2 yet which is also a bummer. any advice or a steering in the right direction would be greatly appreciated as I don't want to try to do it without knowing what im getting into and make my nice little tablet a brick. thanks for your help.

Just flash the stock Kitkat 4.4.2 firmware
Sent from my SM-T805 using XDA Free mobile app

Don't fret. I am a total noob too. I got the following information from a different site, Unfortunately I cannot post the link as a noob. Once I have enough post count, I will add the link to the source (fairness to the author of the source).
How to flash Samsung Stock Rom using Odin
Home > Tutorials > Last update on February 1st, 2015
These are the instructions to flash Samsung Stock ROM (original firmware) using Odin on Windows Computer.
Requirements: Your Samsung device should have at-least 30-40 percent of phone batter to perform the flashing process.
Flash Samsung Stock Rom using Odin
Step 1: Download and install Samsung USB Driver on your computer. In case you have already installed the Samsung USB Driver on your computer then Skip this step.
Step 2: Download (Stock ROM compatible with your device) and extract it on your computer. After extracting you will be able to see these kind of files:
T800XXU1ANJ6_T800XAC1ANI1_HOME.tar.md5
Step 3: Now, Enable USB Debugging on your Samsung Galaxy Device. To enable USB Debugging: Open Settings > Developers Option > USB Debugging > Tick to enable.
(Developers Option is hidden for Android 4.2.2 or above, to show the developer option Go to Settings > About Phone > Built Number (Tap on it for 5-8 times).
Step 4: Power Off your Samsung Device.
Step 5: Now, you have to boot into Download mode. To boot into Download Mode: Press and Hold Volume Down Key, Home Key and Power Key. When phone vibrates Leave the Power Key but Keep holding the Volume Down Key and Home key. You will boot into the Download Mode.
Step 6: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In this situation you have to press the Volume up key to continue.
Step 7: Download and extract Odin on your computer. Use Odin 1.85 (Successful in downgrading to KitKat from Lollipop)
Step 8: Now, Open Odin3 and connect your phone to the computer.
Step 9: Once you have connected the phone to the computer, Odin will automatically recognize the device and show “Added” message at the lower-left panel.
Step 10: Once your device is detected by Odin, click on the “PDA” (or AP) button and select the tar.md5 file that you have extracted in Step #2.
Step 11: Now, click on the “Start” button in Odin to begin the Flashing process.
Step 12: Once you see, the Green Pass Message then remove the USB cable from the device (during this process, your device will restart automatically).
Step 13: Your Samsung Device will now stuck at boot (boot loop). Now, You have to boot into Stock Recovery Mode, To Enable Stock Recovery mode: Press and Hold Volume UP key, Home Key, Power Key. When phone vibrates Leave the Power Key but Keep holding the Volume UP Key and Home key. You will boot into the Recovery Mode.
Step 14: In Recovery Mode, Wipe Data/factory reset.
Step 15: Once Cache Data is cleared, Select Restart Phone Now from the recovery menu.
Step 16: Now, your Samsung Device will restart without any issue with the Stock Rom you have flashed.
I ran into problems flashing the ROM twice and I went into a complete panic (could be Odin 3.10, or corrupted ROM). My region is XAC. Initially I tried XAR, and failed miserably. Eventually I downloaded the XAC ROM from a different source (SamMobile), also using Odin 1.85 instead of 3.10. Everything went smoothly (with the above stated boot loop). Should you get a Fail message in Odin, use the instructions from droidviews (do a web search on droidviews and "firmware-upgrade-encountered-an-issue-solution". Again, I will post the link once my post count is slightly higher.)

Step 3 is not required at all. Odin 3.10 should work fine.
As for factory reset, that shouldn't be required, that should be a last resort. Just wipe cache partition. I would simply install twrp for this.
It should then boot.

[Q] Please help me get started

Greetings everyone
I'm new to samsung. I had a moto g. And there the drill was. Unlocking the boot loader, flashing custom recovery and then installing a rom. But browsing the threads here i am confused. Where should I start. I have a note 2 GT7100 (India) no carrier. With 4.4.2 installed. I wantbto install a 5.x.x custom rom. Please help. I beg

First root your phone with kingo android root then install odin on your pc and install samsung drivers if you need .
Then boot your phone in download mode. Do it by pressing simultaneously ‘volume down’ + ‘home’ + ‘power’ buttons. Release the buttons when you’re asked to press Volume Up, click it and enter download mode.
Go to ODIN folder on your PC and run the ODIN .exe file.
Now you can connect your smartphone to your PC. ODIN will say "ADDED". If ODIN doesn’t display the "added" text, then you will have to re-install the USB drivers for your smartphone.
Go to ODIN program window and click on ‘PDA’.And select the recovery you have downloaded.( https://dl.twrp.me/t03g/twrp-2.8.6.0-t03gub.img.tar.html (for 3g version) https://dl.twrp.me/t0lte/twrp-2.8.6.0-t0ltecan.img.tar.html for 4g version)).After you have installed your recovery go to your preffered rom thread and look for the steps you must to do in order to install the rom.For android l you need to reformat your partiotion(there are useful steps in cyanogenmodx thread)

Vibe P1 Dead

Had screen error before so i cannot unlock phone to retrieve photos and videos. Tried flashing but basically bricked the unit since im a noob. Now it wont turn on, I have "unrecognized usb device" error when plugged to PC. How can I revive the unit and is the data still retrievable?

Yes,you can try the following steps but I cannot give you full gurantee that it will work. Anyways trying is better than nothing.
Download files using this link: https://docs.google.com/uc?id=0BzeT4pCC5KBxcGVadWtZV0ExZXM
Download drivers using this link: http://www.mediafire.com/?bhm18trn6imms5y
Now follow the steps
Step 1: Download Lenovo P1 Stock ROM Firmware zip file in your PC and extract it. (It includes Scatter files, SP Flash Tool, and Drivers).
Step 2: Download Lenovo USB Drivers and install it PC.
Step 3: Go to extracted folder “extracted in Step 1” > SP flash tool > you will see Flash-Tool.exe > Open this to Launch setup.
Step 4: One setup is launched Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted in Step 1) and load it.
Step 5: Connect your device with PC via data cable Now click on Download Button / Upgrade Button (having sign of Green Arrow) to begin flash Flashing.
Step 6: Wait Until process complete. In end of Successful Flash Lenovo P1 Stock ROM Firmware, a Green dot / ring will appears.
Maybe your mobile will become working but you will not recover any data
ALL THE BEST
Regards milkyway3

Leave it to discharge itself (takes up to 3-4 days, on my experience) then use the steps given above. It "ressurected" my unit which was able to power up but the screen wouldn't turn on.

[GUIDE][ZD551KL] Zenfone Selfie bootloop, brick, firmware upgrade errors fix etc.

I had to fix a couple of bricked selfie phones (z00ud and z00udb but i assume this works on any selfie zd551kl model), that were probably bricked by autoflashing wrong firmware, so after spending a few days going thru many different tutorials, this is my tested method on how to fix them (or if you wanna get a cheap phone from taobao and turn it into a decent one), obviously it wasn't extensively tested, so take it as is . Some steps MIGHT be unnecessary but i didn't want to skip them as i was just glad i found a way how to get the phones to completely stable, latest firmware from useless paperweight.
A. if fone doesnt accept any firmware,or bricked,bootlooped etc. flash basic CN firmware, regardless is recovery WW or CN
- Instructions:
1. go to phone recovery (PWR button + VolDwn, release PWR on logo)
2. on phone select adb bootloader, it switches to fastboot mode (or hold PWR button + VolUp, release PWR on logo)
3. on PC unzip archive and start the autoflash .bat file
4. start the phone
files: archive (Asus Zenfone Selfie Z00UDB ZD551KL 3+16 here )
B. upgrade CN/WW firmare to latest version
- Instructions:
1. on PC install adb drivers
2. go to phone recovery (PWR button + VolDwn, release PWR on logo)
3. on phone select adb sideload
4. on PC, copy firmwares into adb folder
5. on PC go to adb folder and start cmd in that folder (shift+Rclk)
6. type adb devices to check connection, then adb sideload firmwarename.zip
7. start the phone
8. repeat all steps until latest CN/WW firmware is installed
files: adb drivers adb-setup-1.4.3 here , firmwares here(UL-Z00T-CN-1.13.40.661-user,UL-Z00T-CN-1.14.40.695-user,UL-Z00T-CN-1.15.40.1548-user)
C.swap CN firmware for WW, upgrade to Android 6
- Instructions: (also someone elses crappy YT video instructions here )
1. on PC install vc x86 and x64 redist packages for 2010,2012,2013 to prevent .ddl missing errors when running flashtool
1. on PC install asus flash tool
3. on fone turn on usb debugging in developer settings (click on about>sw info>build number)
4. turn off fone then start it in fastboot mode (hold PWR button + VolUp, release PWR on logo)
5. connect the fone to PC, start the autoflash .bat file from the firmware folder (CSC_ZD550KL_1_2_0_70_fac_eng_20150905_secure)
6. disconnect usb, wait for fone to reboot, then disconnect the battery on boot logo (remove back cover in advance)
7. return the battery, and start the fone again in fastboot mode, check for extra info on screen
8. on PC start the flashtool, connect the fone in fastboot mode, check if connected, select the model (ZD551KL), select wipe data
9. on PC, browse to firmware (WW_ZD551KL_1.15.40.1582-bsp-user-20160510203701-secured-release) in flashtool, click start, chose Yes for both options (wipe and image promt), wait until flashing is over
10. disconnect and start the fone
11. connect the fone to PC, copy the firmware (UL-Z00T-WW-21.40.0.1692-user) to internal memory or SD card and wait for the fone to recognize the package and auto-update to Android 6
12. connect the fone to PC, copy any newer firmware to internal memory or SD card (no need to copy next iteration or 2156 build, you can go to for ex. 2214 build right away) wait for the fone to recognize the package and auto-update to newer build of Android 6
files: vc redist packages here , firmwares (WW_ZD551KL_1.15.40.1582-bsp-user-20160510203701-secured-release here,CSC_ZD550KL_1_2_0_70_fac_eng_20150905_secure here), Android 6 firmwares here

Are those steps A,B and C and we should follow everything or methods and just follow only 1? I have a Z00UD Asus Model phone, should I still use the firmware Z00UDB from step A? Thank you!!

jasonch said:
Are those steps A,B and C and we should follow everything or methods and just follow only 1? I have a Z00UD Asus Model phone, should I still use the firmware Z00UDB from step A? Thank you!!
Click to expand...
Click to collapse
Depending on your issues, you should pick the step you need, in case nothing works on your phone start with step A, otherwise start with the step that is appropriate for your problem.

Thanks for this guide. Tried this but get stuck at FRP of ASUS. Google mail was on previous owner. Any solutions?

can flash .zip via TWRP?

dhonxean said:
Thanks for this guide. Tried this but get stuck at FRP of ASUS. Google mail was on previous owner. Any solutions?
Click to expand...
Click to collapse
not sure i understand, are you saying your phone is locked with the account from the previous owner ? if so then just do a factory reset from recovery and setup with your own account.

witopanjoel said:
can flash .zip via TWRP?
Click to expand...
Click to collapse
What zip exactly, some should be done like in the tutorial, others can be flashed from recovery

I use the bootloader from your archive on a Z00UD and it is bricked (will remain on Asus screen)...
Do you have a Z00UD bootloader?

may phone is bricked itry this and now my phone is in boot loop..
z00ud ZD551KL

firmwares are not already available on the websites, do you have any other website that has those files?

asus z00ud, soft bricked by wrong flash, now not turning on, display black, only vibrate when plug in charger or press the power button. Please help.

My asus zenfone selfie model become asus zenfone go. How do i fix this? Any help please.

Need Asus Zenfone Selfie Z00UD Hard Brick/Dead Boot Repair Solution
Z00UD Flash After set dead show Qualcomm HS-USB QDLoader 9008 How To Solve? Help Me