Canvas 4 Touch Screen Working Opposite with wrong recovery update - Micromax Canvas 4 A210

I Have A Canvas 4 A210 Device.......
I update it with wrong recover that y my phone touch screen working opposite
When I touch on right top corner it response on left bottom corner
# I do every thing
- Data reset
- installed canvas 4 orignal stock rom
- installed other recovery which compitable with canvas 4
Its A Touch Problem .....
My Phone Is Working Correct after installing new recovery .....my phone is in my hand....i installed new recovery after thats there is nothing show in recovery option after that i restart my phone when my phone is start and come to the main screen and i am going to open pin lock then i see touch is working opposite......... SO THIS IS NOT HAPPEN DUE TO PHONE FALL
NOW can any one help me out what i will do
Thanks In advance

Related

[Q] sm-T210 brick - screen doesnt detect

Ok
i updated the firmware with odin last version to this OFW T210XXANC2_T210OXXANC2_T210XXANC2_HOME.tar.md5
All worked fine and the tablet kept the data, etc.
Now i installed the cwm and the 'android-armeabi-universal-root-signed.zip' from it.
For some reasson the tablet now is bricked for unknown reassons and its screen doesnt respond to finger touchs.
The tablet buttons and sound and booting works, but because the screen doesnt detect touchings, i cant do anything.
I have tried to install other cwm versions etc, and to reinstall the firware, and also that pre-rooted firmware on this forums, reset factory from cwm, etc. No success unfortunatelly.
Please help
anybody ?
i have installed kitkat firmware, the screen doesnt respond touchs
i have installed last jelly bean firmware, the screen doesnt respond
i have installed stock firmware, stucked in the samsung logo
help !
rotation sensor works, buttons works.
same problem ....
arfgh said:
anybody ?
i have installed kitkat firmware, the screen doesnt respond touchs
i have installed last jelly bean firmware, the screen doesnt respond
i have installed stock firmware, stucked in the samsung logo
help !
rotation sensor works, buttons works.
Click to expand...
Click to collapse
You have installed a rom for ROmanian Tab 3 7' Wifi, if you rezolved the problem please let me know how you did it becouse i have the same proplem and i tried everything , i try to install - uninstall a lot of ROM'S Kernel but no response the TAB3 is suck in Samsung logo or TAB 3 Logo . Please Help with a working rom or kernel ...
I had this when playing around with stock kit kats italy to france holland then back to stock jely bean then nole kat rom
Flash the stock firware for yhe tab with odincheck auto restRt and ftime is only on
Right after its near the end off flashing its gonna reboot keepp cable connect still
And hold home button and volume up when it turns off from downloading screen
get in stock recovery mode wipe cache and factory wipe
And reboot system
As its reboot hold home and volume down to get downloading screen
check at top thats its both offical if yes power off and start up
If no reflash again and do the same then it work to setup
Most off the time 2 flashes off stock does the job

HTC Desire 816- Touchscreen input Mirrored, Rooted with Custom Recovery

Touchscreen Response Mirrored - Re-flash Kernel?
I've tried posting on some other forums, and I'll include here what I've written there, but I think maybe I just need to re-flash the kernel? Is there anywhere I can download a flashable zip file of the HTC kernel?
Here's the issue:
Last week my phone ran out of battery and it shut down. When I turned it back on the touch response is mirrored on the X axis. So if I touch on the left, it registers touch on the right. Up and down is still the same. But it's not perfect and some areas of the screen don't respond. I was rooted and had a custom recovery, but I did a factory reset in recovery and it didn't help. So I downloaded the stock ROM from VMRoms and it flashed fine, but it didn't fix the issue. So I switched to an old phone (Optimus V for life!) and put the 816 on my desk.
A day later or so the touch screen worked fine. So I ran the system update to Android 5.
Another day passed with it was working perfectly, and then it switched back at a reboot to being mirrored. Then it started working again, but for the last 3 days it's been mirrored...
So what do I do?
Honestly it sounds like some weird hardware problem.

Please help Me I bricked my droid?

Yesterday i tried a new rom emotional lollipop for my micromax a102(mtk6572)
it worked perfectly
then i tried to install ios 8
it says installation successful on cwm recovery menu
i rebooted my droid and now its keeps flsahing my micromax boot logo on and off
first the boot logo appear(the first logo) then a white rectangle transparent screen come on top of it both of them goes blurry and then totally black..it appears again the recatngle is apperaing in different parts first at the middle of screen then below it....
please help me?
stats: my droid is charging
my device is rooted
boot loader is unlocked
can't get to recovery mod holding the power button doesn't works
is their any way to fix it?
I've stock rom backup too but its useless since i can't get t cwm recovery
when i connect my phone via usb cable it connects and reconnects

Display is blank while in recovery and fastboot modes

hello everyone,
lately I noticed something strange on my OnePlus 3, OnePlus powered by android screen is not showing up ,but the phones boots up and works fine , now I realised that even my Bootloader and recovery are also not showing up on the screen ,but they are working I tested it by restarting the phone in Bootloader and using command Fastboot devices , it is showing in my computer ,but there is nothing displayed on the screen ,I tried flashing TWRP recovery and TWRP modified version, some how even it is also not showing up ,I tried factory reset also, still no use
it's running in OS.4.1.7, recently got an update, after that my phone is not booting up ,but I can feel that device vibrate and the buttons light up as normal but no image on the display, please let me know of any possible solution

Reddmi note 5 pro gets black screen after flash custom rom.

My friend purchased redmi note 5 pro.
He gets successfully unlock his bootloader but when he trying to boot twrp recovery his phone gets black screen. After facing so many problems he finally boot twrp but older one i think so but when he trying to flash custom rom like android pie aosp build or any other custom rom like pixel xperiance he successfully flashed but when he trying to boot his phone after mi logo his phone screen is totally blank and nothing comes up.
But when i check his phone i think so his phone is properly boot but display doesn't show, when i press power button screen lock sounds comes. I dont get this issue in my phone , i also have redmi note 5 pro.
If any one have solution for this please reply.
Need the version of TWRP
Phonexp007 said:
My friend purchased redmi note 5 pro.
He gets successfully unlock his bootloader but when he trying to boot twrp recovery his phone gets black screen. After facing so many problems he finally boot twrp but older one i think so but when he trying to flash custom rom like android pie aosp build or any other custom rom like pixel xperiance he successfully flashed but when he trying to boot his phone after mi logo his phone screen is totally blank and nothing comes up.
But when i check his phone i think so his phone is properly boot but display doesn't show, when i press power button screen lock sounds comes. I dont get this issue in my phone , i also have redmi note 5 pro.
If any one have solution for this please reply.
Click to expand...
Click to collapse
Please provide the full details with twrp version and also he flashed superuser or magisk root manager? if so then which version?
Check this
https://forum.xda-developers.com/redmi-note-5-pro/how-to/fix-huaxing-displays-t3873266
heyyy .. iam facing too exact same pblm since 2 days .. does you have got the solution to this ?
anyone who knows the solution.. same problem to me and my phone is off since past 15 days.. when i switch it on, it is on but not able to see anything on screen... can someone pls help
could be new panel is beign used.?

Categories

Resources