Hey guys am i the only one having issues with wifi, its so painfully slow takes forever to load a webpage forget about watching a video, and no its not my wifi because i have tried several different ones and its always the same slow speeds, ive gone over my data limit twice since i got the g4 because cant you wifi.
is their a fix for this iissue, love my g4 but seriously thinking about another device
bayniner said:
Hey guys am i the only one having issues with wifi, its so painfully slow takes forever to load a webpage forget about watching a video, and no its not my wifi because i have tried several different ones and its always the same slow speeds, ive gone over my data limit twice since i got the g4 because cant you wifi.
is their a fix for this iissue, love my g4 but seriously thinking about another device
Click to expand...
Click to collapse
Try the DNSet application - I had painful Comcast WiFi speeds, or lack thereof, and running this application before turning on WiFi solves the issue. Not sure if it's just me, but you should know that MMS doesn't work when the DNSet application is running.
What is stopping us from hardcoding DNS entries in the WLAN config now that we have root? Is this possible?
Icculus760 said:
Try the DNSet application - I had painful Comcast WiFi speeds, or lack thereof, and running this application before turning on WiFi solves the issue. Not sure if it's just me, but you should know that MMS doesn't work when the DNSet application is running.
Click to expand...
Click to collapse
I looked at it, but the app needs to create a VPN to work, which is a whole other can of worms.
Do you have Comcast? I've learned that Comcast rolled out IPv6 out of nowhere, and many of its routers have issues with some phones (my gf's iphone included). I rooted my phone, disabled IPv6, and now I'm back to consistent 50-80Mbps download speeds on my phone.
Before, I would open up the Speedtest.net app, it would take a full minute or more to locate a server, and then the needle for the download speeds would constantly bounce between 0 and 50, sometimes with my phone prompting me that I lost my internet connection, asking if I would like to switch to data. Worth a shot! If you can't root, DNSet does this for you through the VPN, or you might be able to find a way to shut it off on your router.
I don't seem to have any issues with my phone picking up IPv6 over data or a few other routers, though, so I think this issue is more due to some bad firmware on certain modems.
Yes i do have comcast, their is many other cellphones in my house galaxy s5 ,s6, lg g3, iphone 6, none of them have problems but mine, how do i disable IPv6 once i have root
ryanpm40 said:
Do you have Comcast? I've learned that Comcast rolled out IPv6 out of nowhere, and many of its routers have issues with some phones (my gf's iphone included). I rooted my phone, disabled IPv6, and now I'm back to consistent 50-80Mbps download speeds on my phone.
Before, I would open up the Speedtest.net app, it would take a full minute or more to locate a server, and then the needle for the download speeds would constantly bounce between 0 and 50, sometimes with my phone prompting me that I lost my internet connection, asking if I would like to switch to data. Worth a shot! If you can't root, DNSet does this for you through the VPN, or you might be able to find a way to shut it off on your router.
I don't seem to have any issues with my phone picking up IPv6 over data or a few other routers, though, so I think this issue is more due to some bad firmware on certain modems.
Click to expand...
Click to collapse
From the G3 after the 5.0 update, the fix was to disable IPv6 as well. This isn't related to IPv6 though, as it only seems to effect the G3/G4. Also, Google "What is my IP" when on mobile data and you will likely have an IPv6 address from Verizon.
I don't know that it isn't related to ipv6; Samsung phones have similar issues and my girlfriend's iphone does as well. I don't think the problem is the protocol itself, but how certain modems (seemingly Comcast ones) incorrectly implement them in their firmware
Related
I'm having trouble getting wifi tether to work with 4G. It was working fine yesterday, and nothing has changed between when I last used it and now. The weird part is, when connected to 4G and tethered I can go to any Google site, but nothing else will load. When I'm connected to 3G everything works. I thought maybe it was that wifi tether is set to use Google's DNS and perhaps Google was having issues, but why would they work for 3G and not 4G. Do you think Sprint/Clearwire is blocking Google's DNS in an effort to curb unpayed tethering on 4G? Any other ideas?
Edit: I've tried a few different free DNS services and the same thing happens with all of them. No connection issues on 3G, but ONLY Google pages will load via 4G, regardless of which DNS service I'm using. This is a very strange problem....The only two things I can think of is Spring/Clearwire blocking DNS services or there's some sort of bug on the 4G network at the moment.
I'm seeing the same issue, and I did the same troubleshooting steps. It's almost as if they are inspecting http headers and checking the MAC against some database. Hopefully something is just broke on Sprint's side, though.
Co-signing. 3G wireless tether works while 4G doesn't.
Same Problem in NYC
Hey Guys, glad I found this post. Thought I was going crazy. Everything is fine on 3G but only google sites and certain non picture portions of other websites will load on 4G.
Strange thing is that all websites are fine on the phone itself while on 4G.
Heard someone that's using the paid sprint hotspot is having the same issue, so I'll keep my fingers crossed that this is a temporary issue.
rpav2004 said:
I'm seeing the same issue, and I did the same troubleshooting steps. It's almost as if they are inspecting http headers and checking the MAC against some database. Hopefully something is just broke on Sprint's side, though.
Click to expand...
Click to collapse
What? You do realize that the only MAC Sprint ever sees is that of the phone, right? As for inspecting headers, not only would that be trivial to get around, but it would also be likely to cause breakage in third-party browsers as the whitelist would likely not be complete. Reliable browser detection via HTTP is near impossible. That also would have no effect on non-HTTP traffic, IMAP e-mail or an XMPP instant message connection for example.
wolrah said:
What? You do realize that the only MAC Sprint ever sees is that of the phone, right? As for inspecting headers, not only would that be trivial to get around, but it would also be likely to cause breakage in third-party browsers as the whitelist would likely not be complete. Reliable browser detection via HTTP is near impossible. That also would have no effect on non-HTTP traffic, IMAP e-mail or an XMPP instant message connection for example.
Click to expand...
Click to collapse
I believe there is an individual MAC for every radio in the phone, so you would have a unique MAC for your cell radio, wimax radio, bluetooth radio, etc. Also, I don't believe he's referring to the browser's identity info, but the packet headers that contain DNS/tcp/etc. info that all network services use. That would have an effect on ALL traffic, and it clearly does as nothing works expcept most google services.
I have been usb tethering with CM7 since GB6 and it would switch back and forth between 3G and 4G without any problems. Pre GB roms would require google tether which would only work on 4G.
I am now experiencing the same dead 4G tether and am not droping back to 3G since the 4G signal is good. Yep like everybody else the phone by itself is connecting and browsing.
All tether traceroutes and pings seemed reasonable. Flashed back to an earlier working release and it also failed. I have not tried any port other than 80 at this time.
marcog42 said:
Heard someone that's using the paid sprint hotspot is having the same issue, so I'll keep my fingers crossed that this is a temporary issue.
Click to expand...
Click to collapse
I just added the Sprint HotSpot to my account and I can confirm that it's working flawlessly with 4G. Even with the HotSpot feature on the account, wireless tether will not work.
Imap works, SMTP works, ftp works, ftp via browser (port??) or any other browser activities do not work while tethering on 4G.
Port 80 and/or tethering via browser is hosed.
What wifitether version is everyone using? I'm using 2.0.5
Well, I got home connected to 4G and tethered to my laptop. Everything worked. Might be dependant on what tower you're connected to. I'm using wifi tether 3.0 pre11, but had the issue with 2.0.7.
marcog42 said:
Well, I got home connected to 4G and tethered to my laptop. Everything worked. Might be dependant on what tower you're connected to. I'm using wifi tether 3.0 pre11, but had the issue with 2.0.7.
Click to expand...
Click to collapse
I believe you're correct. I downloaded 3.0 pre11 and still nothing. Strangely enough it would allow streaming of an Amazon video on the browser but it worked on 2.0.5 as well. I wonder what clearwire is doing on their end. Does anybody have any ideas on circumventing it?
wolrah said:
What? You do realize that the only MAC Sprint ever sees is that of the phone, right? As for inspecting headers, not only would that be trivial to get around, but it would also be likely to cause breakage in third-party browsers as the whitelist would likely not be complete. Reliable browser detection via HTTP is near impossible. That also would have no effect on non-HTTP traffic, IMAP e-mail or an XMPP instant message connection for example.
Click to expand...
Click to collapse
I didn't go into much detail since I was posting from my phone, but allow me to expound now. Wifi-tether does nothing more than NAT your internal network to it's live IP address, whether that be on 4G or 3G. Both of these radios have the physical addresses that would not be hard to trace on a cellular network. When the packets are transmitted, as is the case with any packet transmission, the only information that gets changed as the packet passes through the NAT is the IP address. All of the other information stays the same. Now, in terms of most traffic, this isn't a big deal, but with HTTP and HTTPS traffic, the stream of data sent contains the header of the browser sending the request. Since the NAT doesn't mask this data, it's sent out into the wild blue yonder (Sprint's Clearwire WAN) where the capability of inspecting the packet header is very easy to do with most enterprise grade equipment. Now, while any blacklist of headers will inevitably be incomplete, a very simple whitelist of 'known' headers - such as mobile browsers on the market and the included browser on the phone - can be implemented with a few short lines of code. Now, while it might seem trivial, how many users are going to attempt to obfuscate or change their packet header identifiers just to get online? They'll give up, use another connection, or just view the pages on the phone.
I tested this for awhile today, using multiple different browsers on my PC and got nothing. I opened up a VPN connection to my workplace, and routed all my traffic through that (that is, encrypted in an IPSEC tunnel) and the internet worked fine. The most brilliant part, from Sprints point of view, is that the HTTP session is never actually 'closed', just kept in a perpetual waiting state where no data is transmitted. If this is all a fluke, it's the best bandwidth saving fluke Sprint could ever dream up.
All in all, I'm really really hoping this is a snafu, but all signs are pointing to sprint catching onto our usage, which is a huge uh-oh.
edit: I was still able to ssh and telnet via my tether, and open up the VPN and receive email, which points to this being a targeted attack on HTTP. Double uh-oh.
Firefox, IE, Opera, Epithany, Chromium, Midori and Konqueror all fail.
Port 80 traceroute is good.
Does anybody knnow of an agent switcher that can be used?
What about downloading Adfree and installing the host files. That fixed my data issues on my Evo.
Sent from my PC36100 using XDA App
This appears to be a new sprint development. Are you saying that you can tether with 4G?
Aha... finally found some people who are having the same issues, 4g just stopped working with wireless tether about 3 days ago. 3g works just fine, and 4g connects and is pushing data to the phone, but no webpages are loading on my laptop when 4g is on... I'm out of 4g range right now, but will check back in when I'm back in range tomorrow.
It's working for me again. I'm replying to this thread using my wifitether uder 4G.
Working again here too.
Hey guys,
So I've had my Verizon HTC One for awhile now, and I've yet to really get it to work properly on my home WiFi network, regardless of the ROM or Radios I'm using.
I have a Cable provider at both my house and work, but each location has a different router. At work we use a Edgewater bridge/router combo, and I am able to upload/download and stream SD content okay, but never HD. However, at home on my Motorola Surfboard SBG6580 Modem/Router combo can rarely get things as simple as Google to bring up a search result. I never get a "Connection error" message, just a never-ending loading page. I've scoured the internet, and Motorolas help pages, trying to find any indication of a fix. I've attempted changing wireless settings between 2.4GHz and 5.0GHz, tried every channel available (1 - 11), as well as removing security encryption, firewall, and setting up a Static IP address, and there is no difference.. The odd thing is when I run a Speedtest, I get 10Mbps/1Mbps up/down.
The reason this has become a problem now, is I had a background data glitch and used 12GB's of data last month, resulting in a $200 phone bill (I don't usually go over 4, so I never paid attention to what was going on).
So, my questions are;
A. Has anyone else experienced this issue with the Motorola modems before, as I'm thinking about buying a separate Wireless Router as an option.
B. Is there any known fixes for this problem
I use to have the same Motorola surfboard. I had a few different issues. It would lose connection daily and it was inconsistent. I read up on it and it has several known issues. I sold it and have moved on to a Motorola docsis 3.0 modem and the night hawk router. Not one issue with any phones, tablets, or computers. No issues with htc one or one max.
Have you tried factory resetting your modem/router? Do other wifi device work ok with your router? Does your device work right on other wifi networks (not home or work)?
cmlusco said:
Have you tried factory resetting your modem/router? Do other wifi device work ok with your router? Does your device work right on other wifi networks (not home or work)?
Click to expand...
Click to collapse
I've reset all the settings, both a power cycle, and a hard reset. Doesn't change.
All of my computers, my girlfriends S3, and my sisters Stellar work fine on the network. I don't go many places, so I haven't tested it on any outside networks, but the assumption is it SHOULD (in theory) work on non-Motorola routers considering it functions at my work.
Aldeel said:
I've reset all the settings, both a power cycle, and a hard reset. Doesn't change.
All of my computers, my girlfriends S3, and my sisters Stellar work fine on the network. I don't go many places, so I haven't tested it on any outside networks, but the assumption is it SHOULD (in theory) work on non-Motorola routers considering it functions at my work.
Click to expand...
Click to collapse
Is there any firmware updates for your router. Also have you checked all the WiFi settings on phone and make sure they are default. The most important would be WiFi frequency set to auto. The problem has to be in the router though IMO. If you read around on line you will see many un pleased customers of that particular model. I would stray from Motorola routers to be honest. Even Cisco isn't the quality they used to be. I use an Asus router now and it works great. I have already burned up 2 Cisco usb wireless adapters and a d link and Cisco router. Moving to Asus was the best decision I ever made.
The fact that the phone works fine on other networks, and other devices work fine on your network leads me to believe that neither has a conectivity issue. I find it strange that browser activity is slow/non-existent, but a speed test shows good speed. What did you use to test that speed? Do apps that use the internet work at a normal speed, like the play store? Have you tried a different browser from the market, such as chrome or firefox?
The 6580 is junk. I work for a large ISP whose name begins with c and ends with t. We haven't gotten a decent firmware from moto yet. The firmware we are currently on suffers from all kinds of performance problems. Do yourself a favor and never buy an all in one device again.
Sent from my HTC6600LVW using Tapatalk
dottat said:
The 6580 is junk. I work for a large ISP whose name begins with c and ends with t. We haven't gotten a decent firmware from moto yet. The firmware we are currently on suffers from all kinds of performance problems. Do yourself a favor and never buy an all in one device again.
Sent from my HTC6600LVW using Tapatalk
Click to expand...
Click to collapse
I have the [Aeris?] Wireless N gateway from said cable company and it works amazing with all my devices. Upgraded from a 5 year old Airport Extreme N since it's actually cheaper to have home phone I don't even use.
NotATreoFan said:
I have the [Aeris?] Wireless N gateway from said cable company and it works amazing with all my devices. Upgraded from a 5 year old Airport Extreme N since it's actually cheaper to have home phone I don't even use.
Click to expand...
Click to collapse
That's good you have good luck with that model. The Technicolor wg from the same provider is also decent. I'm still a fan of having your modem and router separate. I will keep my blazing speeds from my r7000 using 802.11ac on this phone.
Sent from my HTC6600LVW using Tapatalk
In some situations on my HTC One it has a hard time pulling internet from a wi-fi network when the frequency band is set to Auto. My One plays a lot nicer on Wi-Fi when I manually set it into 2.4ghz or 5ghz.
I just got this same modem and any time I connected my One to the network it would seemingly kill the wireless signal. I had a D-Link wireless router and the TW cable modem previously and I connected fine. My old Inc2 would cause the same issue with the old setup, never sure why it did that.
Anyway, after some searching I found a solution that has worked so far, not sure why, but I changed the LAN IP from the default 192.168.0.1 to .0.2 and no more issues, worth a try.
YMMV
ok so i searched everywhere for this and couldn't find a solution. i have a note 4 and it will connect to my home wifi just fine. i can search the internet on it, but facebook doesn't load and neither do certain games and the app market loads very very slowly. when i had my S4, it would do everything just fine. i was at my friends house and connected to his wifi and everything loaded lightning fast. so i know it's a problem with my wifi, i just don't know what.
my modem is netgear and my router is belkin AC 1200
any ideas on what to check so i can fix it? i suck up a lot of data lol
Do a speed test on your wifi with another device to determine if it is your phone or your wifi. How does your phone perform on 4g? Does it do the same thing?
the wifi is fine. i can browse the internet, watch netflix, etc. When i'm on my data, everything loads like it normally would.
bump for some help
-Torres- said:
bump for some help
Click to expand...
Click to collapse
Try hard resetting you router and before customizing it(changing SSID, encryption, etc...), test it with your phone to see if its any better.
it didn't seem to help. it's dual band and i tried on both. it wouldn't even load the google play until i switched bands.
any other ideas of a possible fix?
-Torres- said:
any other ideas of a possible fix?
Click to expand...
Click to collapse
Yes.
I just got my VZW Note 4 yesterday and noticed almost the exact same problem. There is a little bit of info out there talking about things like power saving mode and stuff, but I noticed that my speedtest.net throughput was excellent. My next thoughts were DNS resolution or an IPv6 problem. Turns out my wireless router had a default setting with IPv6 routing enabled, but my ISP does not serve IPv6. You may notice the same kind of initial lag on Ubuntu installs (especially with certain VPS providers) where every single command you issue seems to take ages to start, but then completes quickly. I know how to deal with Ubuntu to force a preference for IPv4, but a locked down Samsung phone is a different matter entirely. Thankfully, I was able to just turn it off in the router.
For my specific router (Belkin AC1200 DB), the user interface has an IPv6 settings page, but the options they present to end users isn't intuitive. I changed my 'connection type' on this page to "Local Pass-Through Only", and my problem immediately went away. Have a look and see if you find anything similar.
Thanks, and good luck!
Aggraxis
Aggraxis said:
Yes.
I just got my VZW Note 4 yesterday and noticed almost the exact same problem. There is a little bit of info out there talking about things like power saving mode and stuff, but I noticed that my speedtest.net throughput was excellent. My next thoughts were DNS resolution or an IPv6 problem. Turns out my wireless router had a default setting with IPv6 routing enabled, but my ISP does not serve IPv6. You may notice the same kind of initial lag on Ubuntu installs (especially with certain VPS providers) where every single command you issue seems to take ages to start, but then completes quickly. I know how to deal with Ubuntu to force a preference for IPv4, but a locked down Samsung phone is a different matter entirely. Thankfully, I was able to just turn it off in the router.
For my specific router (Belkin AC1200 DB), the user interface has an IPv6 settings page, but the options they present to end users isn't intuitive. I changed my 'connection type' on this page to "Local Pass-Through Only", and my problem immediately went away. Have a look and see if you find anything similar.
Thanks, and good luck!
Aggraxis
Click to expand...
Click to collapse
DUDE!! this is exactly what i was looking for. i think this fixed my issue. surfed facebook briefly and it loaded everything instantly. i'll check more as the day goes on. thanks so much man
Fixed My Issue too!
Hey Guys
Newbie here! I just wanted to say that this fixed my problem as well. I don't usually post as you can tell by my info but this was worth coming out of the dark to reply to.
Now to clarify, I too have a Belkin router AC1200 so it may be specific to those. Anyway thanks for the help and enjoy the fish!
someone sticky this! i have the same wifi issue , i am at work right now but i will try it when i get home! , i hope this works!
I am having this same issue bUT Comcast here uses ipv6 as well,I have a Belkin n1 router what do I do?
---------- Post added at 07:39 PM ---------- Previous post was at 06:50 PM ----------
never mind i disable ipv6 in my comcast modem and it seen to do the trick, any idea why this is happening?
I've been having the exact same issue on my Note 4. for the past week or so. Our router/modem is a DPC3941T from Comcast, and I can't seem to find how to turn off IPv6. This setting was under Connections > Local IP Network. If anyone could help instruct me further, you would be a great help. I'm pushing my data cap for the month as it is because of this >.<
I'm having the same problem too. The funny thing is that I went to the Verizon store to see if they could trouble shoot it and the phone did not work on their wifi network either! I realize now how to access my IPv6 settings in my router and that does seem to fix the issue. Unfortunately I cant imagine very many businesses with wifi networks will allow me to reconfigure their router everytime I want to use wifi.....
I started having this issue when I upgraded to lollipop. My Netgear C6300 AC1750 doesn't seem to have an option to disable ipv6 though. Any suggestions?
Hello there,
I am encountering a problem with my beloved N5X...
Since a few weeks it randomly loses connectivity (both cellular and Wi-Fi)
And after a few seconds (sometimes minutes) it catches the network back.
For example:
I wake up the phone for checking messages, and i see WhatsApp saying "searching for messages", no warning icons for network.
Then i try to load a Chrome page, it does not load..
After a few seconds all is getting back to normal and everything loads. (the web page, new messages notifications comes on, etc)
I tried so far:
- Reboot (after a reboot it works normally for a few hours, then problem begins again)
- Resetting network parameters (does nothing)
- Complete factory reset (had 2 weeks problem free then the problem begins again)
- Flashing custom ROM (from Google factory to last Lineage OS 15.1)
For informations:
- No VPN
- No gaming, the phone never heats up
- Good network coverage (both cellular and Wi-Fi)
- No network related apps
- The phone is 3 years old, never felt on the ground
Any ideas?
Thanks a lot for reply, and have a nice day!
I'm having a similar problem since Oreo update, but only on WiFi. On 4G network is working flawlessly but I think is due to carrier network settings on cellular towers.
Every search I made on the web to address the issue finished with a lot of posts read but no decent solution whatsoever, but the other day a reply on reddit made me think and I found a setting on my router WiFi AP section called "Unscheduled APSD (Automatic Power Save Delivery)" and since I disabled it my phone seems working better. I don't know if it's just random luck or it was really the cause of the issue but you can try.
Hope it helps.
.bucch said:
I'm having a similar problem since Oreo update, but only on WiFi. On 4G network is working flawlessly but I think is due to carrier network settings on cellular towers.
Every search I made on the web to address the issue finished with a lot of posts read but no decent solution whatsoever, but the other day a reply on reddit made me think and I found a setting on my router WiFi AP section called "Unscheduled APSD (Automatic Power Save Delivery)" and since I disabled it my phone seems working better. I don't know if it's just random luck or it was really the cause of the issue but you can try.
Hope it helps.
Click to expand...
Click to collapse
Hello,
Thanks for your reply.
I searched everything on the phone that could be wrong and i also ended up that router might be the cause.
I did not found the setting you mention (i'm on Synology router) but i tried to disable the 5 GHz frequency band and use only the 2.4 GHz one.
Since then the phone works perfectly! Although the Wi-Fi speed is a bit slower..
I hope this can help you too!
breacH86 said:
Hello,
Thanks for your reply.
I searched everything on the phone that could be wrong and i also ended up that router might be the cause.
I did not found the setting you mention (i'm on Synology router) but i tried to disable the 5 GHz frequency band and use only the 2.4 GHz one.
Since then the phone works perfectly! Although the Wi-Fi speed is a bit slower..
I hope this can help you too!
Click to expand...
Click to collapse
I was on 2.4Ghz only since a few months but had the issue anyway before disabling uAPSD.
If your bandwidth is reduced is probably because your network is on a "busy" channel, try scanning all the wireless networks around your home (i use wifi analyzer on my phone) and see which are the "busy" channels and set yours on a free one. Bandwidth on 2.4 and 5 ghz should be the same, the pro of the first is a better (wider) coverage of the signal, mostly through walls and the pro of the second is less interference with other wireless technologies and environment at expenses of the coverage.
.bucch said:
I was on 2.4Ghz only since a few months but had the issue anyway before disabling uAPSD.
If your bandwidth is reduced is probably because your network is on a "busy" channel, try scanning all the wireless networks around your home (i use wifi analyzer on my phone) and see which are the "busy" channels and set yours on a free one. Bandwidth on 2.4 and 5 ghz should be the same, the pro of the first is a better (wider) coverage of the signal, mostly through walls and the pro of the second is less interference with other wireless technologies and environment at expenses of the coverage.
Click to expand...
Click to collapse
Well, after a few days i noticed the problem still persist even on 2.4GHz, but less than before..
Unfortunately Synology router does not have APSD option in the Wi-Fi settings.
I tried to put Protected Management Frames (PMF) on "enable - optional", that setting was disabled before.
Wait and see.
Thanks again!
S20 Unlocked from Samsung.com
Carrier: AT&T
Issue:
When on home WiFi network, the S20 does not load images in apps such as Facebook, Instagram, etc. Slows to a complete crawl.
If I test on fast.com, I receive normal home speeds on mobile of 200-400mbps
If I turn off WiFi, performance immediately returns to as expected.
Any ideas?
Router is Netgear XR500
Quality of Service is off.
Did you try a reset of network settings under settings?
mycomputerisjunk said:
Did you try a reset of network settings under settings?
Click to expand...
Click to collapse
Just tried that.
Fast.com reported download speed of 500mbps
I was able to download an app at an appropriate speed
It seems to be only Facebook and Instagram that are still showing the issue -- extremely slow load times.
Both work as expected on LTE.
Found this old thread.
https://forums.androidcentral.com/facebook/521201-facebook-slow-over-wifi-galaxy-s6.html
Android System Web Viewer did take forever to update while we set the phone up. I'll see if I can roll that back.
I don't have any issues with any of my other android devices on my router - but I'll also check IPV6 settings.
benharsen said:
Found this old thread.
https://forums.androidcentral.com/facebook/521201-facebook-slow-over-wifi-galaxy-s6.html
Android System Web Viewer did take forever to update while we set the phone up. I'll see if I can roll that back.
I don't have any issues with any of my other android devices on my router - but I'll also check IPV6 settings.
Click to expand...
Click to collapse
No luck trying this.
Tried turning IPV6 on - in router settings. No difference. Turned it back off.
System web Viewer had an update. Updated. No difference. Disabled it. No difference.
Those two apps still wildly underperforming on wifi.
Try it on a different wifi connection outside of home? Same results?
Lock-N-Load said:
Try it on a different wifi connection outside of home? Same results?
Click to expand...
Click to collapse
I tried it on another phone's hot spot and could not replicate the issue.
I guess that means it's a problem with the router settings. Not sure how.
benharsen said:
S20 Unlocked from Samsung.com
Carrier: AT&T
Issue:
When on home WiFi network, the S20 does not load images in apps such as Facebook, Instagram, etc. Slows to a complete crawl.
If I test on fast.com, I receive normal home speeds on mobile of 200-400mbps
If I turn off WiFi, performance immediately returns to as expected.
Any ideas?
Router is Netgear XR500
Quality of Service is off.
Click to expand...
Click to collapse
I have the same phone, carrier and use wifi at home as well. No issues, sorry you're having problems....
Maybe a full wipe?
reefur said:
I have the same phone, carrier and use wifi at home as well. No issues, sorry you're having problems....
Maybe a full wipe?
Click to expand...
Click to collapse
I'm afraid that might be the next step.
benharsen said:
I'm afraid that might be the next step.
Click to expand...
Click to collapse
Hope you sort it out sir, I normally don't get unlocked on ATT due to losing WiFi calling but I get a better signal now and you can just call to get visual voicemail fixed if yours doesn't work right away so I'm loving it....
I'm sure you'll love it too once you get it sorted...
Bringing back zombie thread.
Was a fix found?
My 20+ is having problems with wifi slowing to a crawl after just a few minutes.
Just bought a new router TP-Link AX11000 and it started so I thought it was the router but everything else on wifi in the house gets expected speeds my two 20+'s not so. I think it has to do with WIFI 6. If I stay within 10ft of the router everything is fine after that... I go in my bedroom 30ft away and have -63dbm signal strength and I can run a speed test and get 500mbps down try again and it will start at 500 and slow to around 45 try a 3rd time and and I barely get 4mbps 4th time and it's 0 with signal strength still at -63 on all of the test in the bedroom my upload will be 45mbps.
after a lot of testing with battery settings and things on the phone found out that my slow wifi was due to 2 settings on the router.
first in your router disable WMM, this made my s20+ use like 30mbps max in my case. now list my wifi 5ghz as +800mbps
seconds, disable ipv6 on the router. this made my phone ultra slow to everything. like play store hang on app updates, google drive take forever to load every single photo, like is taking forever to get the first reply from the server.
with that changed now the phone works at full speed on wifi. play store updates are shocking fast.
so lame that a flagship that cost nearly 1 thousand dollars have to disable things externally to work properly. no other phone or device works bad with the previous config of WMM or IPv6. I have a Linksys WRT1900ACS.
Hope they fix it with a software upgrade.