Hey,
I am looking for an nandroid/ twrp backup for the one m8. Is there anyone who could provide an backup ?
Cheers
Noone ?
Für was brauchst es?
phonenoob03 said:
Für was brauchst es?
Click to expand...
Click to collapse
Because i need to send my one m8 back to htc and i need to be stock
zFr3eak said:
Because i need to send my one m8 back to htc and i need to be stock
Click to expand...
Click to collapse
You can load a Stock Firmware here:
https://www.ress.at/forum/htc-one-m8-firmware-1-54-1540-10-android-4-4-2-t24461.html
phonenoob03 said:
You can load a Stock Firmware here:
https://www.ress.at/forum/htc-one-m8-firmware-1-54-1540-10-android-4-4-2-t24461.html
Click to expand...
Click to collapse
And why do you think that should work ?
---------- Post added at 08:12 PM ---------- Previous post was at 08:09 PM ----------
@ the OP.
Do a fastboot command :
Fastboot getvar all
Present me the outcome WITHOUT the serial and imei info. I don't think the dev edition works on your device as it'a a branded one.
Mr Hofs said:
And why do you think that should work ?
Click to expand...
Click to collapse
This version works in 99% of cases .
Contains modem and bootloader !
It is also very easy because she brings her own Flashtool
phonenoob03 said:
This version works in 99% of cases .
Contains modem and bootloader !
It is also very easy because she brings her own Flashtool
Click to expand...
Click to collapse
No it doesn't ! If you are S-OFF it doesn't matter that much but even then the MID needs to match. The advantage of S-OFF is that you can downgrade the firmware with a RUU. For S-ON devices its a completely different story. The CID & MID needs to match. The bootloader must be compatible with the firmware/ruu (when the RUU is lower than the bootloader/current OS it won't work either) otherwise it won't even run. It's a RUU btw, means a Rom Update Utility and i am 100% certain a dev edition does NOT work on a carrier branded device !
So conclusion......that firmware works yes, but definitely NOT for 99% of the cases. If i were you i would read up on branded devices/s-on and the advantages and disadvantages because in this case you are way off
ok
Mr Hofs said:
And why do you think that should work ?
---------- Post added at 08:12 PM ---------- Previous post was at 08:09 PM ----------
@ the OP.
Do a fastboot command :
Fastboot getvar all
Present me the outcome WITHOUT the serial and imei info. I don't think the dev edition works on your device as it'a a branded one.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.771.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: H3G__106
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dcdaa6e0
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks
You can give the 2.xx version a go from here
http://forum.xda-developers.com/showthread.php?t=3086860
If it doesn't work make a request. And check the stickied thread in the general section with firmwares and backups ! And as i already thought, the link phonenoob gave here does NOT work for you !
Mr Hofs said:
You can give the 2.xx version a go from here
http://forum.xda-developers.com/showthread.php?t=3086860
If it doesn't work make a request. And check the stickied thread in the general section with firmwares and backups ! And as i already thought, the link phonenoob gave here does NOT work for you !
Click to expand...
Click to collapse
Wow thanks. Why can't i use the 4.20.771.2 ? it its for hboot version: 3.19.0000 exactly the same as i have.
zFr3eak said:
Wow thanks. Why can't i use the 4.20.771.2 ? it its for hboot version: 3.19.0000 exactly the same as i have.
Click to expand...
Click to collapse
Didn't see the 4.20, missed that in the hurry. Of course you can use the exact same version as your hboot version.
Mr Hofs said:
Didn't see the 4.20, missed that in the hurry. Of course you can use the exact same version as your hboot version.
Click to expand...
Click to collapse
Everything worked, thank you
zFr3eak said:
Everything worked, thank you
Click to expand...
Click to collapse
Awesome. Enjoy
Related
i found Ruu to flash on my d816 but i can't download it due to my region so if anyone can uplode it on google drive to help me
i cant post the link cuz i'm still new here
anyone would help PM me
Nilmotoo said:
i found Ruu to flash on my d816 but i can't download it due to my region so if anyone can uplode it on google drive to help me
i cant post the link cuz i'm still new here
anyone would help PM me
Click to expand...
Click to collapse
What model of the 816 do you have?
FoxyDrew said:
What model of the 816 do you have?
Click to expand...
Click to collapse
816 dual sim middle east version and this is the details :
version-bootloader: 3.19.0.0000
version-baseband: 1.13.3230.16.0
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: a5_dug
platform: hTCBmsm8226
modelid: 0P9C70000
cidnum: HTC__J15
RUU FILE
nilmotoo said:
816 dual sim middle east version and this is the details :
Version-bootloader: 3.19.0.0000
version-baseband: 1.13.3230.16.0
version-microp: None
version-main:
Version-misc: Pvt ship s-on
meid: 00000000000000
product: A5_dug
platform: Htcbmsm8226
modelid: 0p9c70000
cidnum: Htc__j15
Click to expand...
Click to collapse
i already have the ruu file -- i will upload it soon ( google drive )
baager said:
i already have the ruu file -- i will upload it soon ( google drive )
Click to expand...
Click to collapse
back up or flashable zip ?? :silly::good:
Nilmotoo said:
back up or flashable zip ?? :silly::good:
Click to expand...
Click to collapse
A RUU is a RUU. It's not a backup or a flashable zip.
FoxyDrew said:
A RUU is a RUU. It's not a backup or a flashable zip.
Click to expand...
Click to collapse
Ok thanks
baager said:
i already have the ruu file -- i will upload it soon ( google drive )
Click to expand...
Click to collapse
hi
Please if you have RUU for HTC__J15, please can you upload it .
best regards
Mohamed
Heloooo…
Not yet uploaded ..that ruu…. We need it sr…… @baager
baager said:
i already have the ruu file -- i will upload it soon ( google drive )
Click to expand...
Click to collapse
Where is it man.. we need it.. helppppp
Hi guys!
Did anyone find the RUU for the model?
Q&A for [OTA][ROM] HTC One X Stock ROM 4.19.707.3 | ODEX / DEODEX | For Devs
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
installar htc_044 how this rom.
installar htc_044 how this rom, since my htc started on bootloader and recovery if any
look ! its my first time to type on something like this, look i rooted my mobile and changed the software to cym 11 kitkat 4.4.4 , now i want to get back to its original software what can i do and what is the steps please it ?
osha31 said:
look ! its my first time to type on something like this, look i rooted my mobile and changed the software to cym 11 kitkat 4.4.4 , now i want to get back to its original software what can i do and what is the steps please it ?
Click to expand...
Click to collapse
what is your main version give the result from fastboot getvar version-main
Need stock rom
Thant said:
what is your main version give the result from fastboot getvar version-main
Click to expand...
Click to collapse
mine is:
cidnum: HTC__044
bootloader: 1.73.0000
version-main: 4.19.707.5
You have orig stock rom for me?
magz123 said:
mine is:
cidnum: HTC__044
bootloader: 1.73.0000
version-main: 4.19.707.5
You have orig stock rom for me?
Click to expand...
Click to collapse
No you must to find nandroid backup on this version no RUU
Hello guys,
I`m a lil` confused, so if I have:
cid: HTC__044
version-main: 4.19.707.5
Can I use the boot.img and the recovery.img from 4.19.707.3, from the 1st post?
And for my 4.19.707.5, what should I get, odexed or deodexed?
What is the method I should use to put the stock rom back, I have big unresponsive touchscreen issues with cm12 after few months of usage.
Other info from my phone:
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.73.0000
(bootloader) version-baseband: 5.1204.167.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.707.5
(bootloader) serialno: SH24RW119124
(bootloader) imei: 353043056527628
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3956mV
(bootloader) devpower: 75
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
//Xao
Thank you for all free stuff here!
hello everyone
im on cid 044 and my android is 4.2.2 official ,build number is 4.19.707.5 rooted and unlocked and hboot is 1.73
i dont know if i can flash HTC One X *STOCK* ROM | 4.19.707.5 odexed (http://forum.xda-developers.com/showthread.php?t=2458291) on my phone?
thanks so much
[Q&A] Audio [MOD][2015.02.19] - HK - BS Aroma Switcher 4.1.0 / most M8's - ADSP v56.
Q&A for Audio [MOD][2015.02.19] - HK - BS Aroma Switcher 4.1.0 / most M8's - ADSP v56.2.2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Audio [MOD][2015.02.19] - HK - BS Aroma Switcher 4.1.0 / most M8's - ADSP v56.2.2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hi Sneakyghost, please forgive my ignorance but I have a couple of questions regarding this mod.
I have a M8 with stock 5.0.1 ROM (rooted) S-off CID 02---001, is this usable with my phone? Also am I right in thinking I can use this mod to enable H/K but be able to revert back to Boom Sound so OTA update's will work in future?
Thank you very much.
Rickyw324 said:
Hi Sneakyghost, please forgive my ignorance but I have a couple of questions regarding this mod.
I have a M8 with stock 5.0.1 ROM (rooted) S-off CID 02---001, is this usable with my phone? Also am I right in thinking I can use this mod to enable H/K but be able to revert back to Boom Sound so OTA update's will work in future?
Thank you very much.
Click to expand...
Click to collapse
Hello Sir,
your CID is something i have never seen before.
Why don't you grab my batch script tool from HERE and send me a fastboot getvar all output? That is function 12 in my tool.
Please make sure to XXXX your IMEI and Serial when providing that log.
Sneakyghost said:
Hello Sir,
your CID is something i have never seen before.
Why don't you grab my batch script tool from HERE and send me a fastboot getvar all output? That is function 12 in my tool.
Please make sure to XXXX your IMEI and Serial when providing that log.
Click to expand...
Click to collapse
Thank you for the reply. I ran function 12 in your tool (very nice tool BTW) so here is my output.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.206.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT********
(bootloader) imei: 358**********
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dcdaa6e0
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Execution time is 15(ms)
Thank you very much.
Rickyw324 said:
Thank you for the reply. I ran function 12 in your tool (very nice tool BTW) so here is my output.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.206.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT********
(bootloader) imei: 358**********
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dcdaa6e0
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Execution time is 15(ms)
Thank you very much.
Click to expand...
Click to collapse
This one is easy. Its O2 branded but a WWE phone actually. Since you are S-OFF you can just run the WWE firmware files or RUU's. It will neither damage your phone nor harm its performance. O2 is using the same files but gives the phone its own CID. So, with S-ON, the phone would reject WWE, but with S-OFF, you can just set it to SuperCID (11111111) and it will just take any firmware.
At the same time, this means, you can do everything the WWE phones can. So, to answer your actual question: this MOD will just work as expected on your phone. As long as you are S-OFF.
I just s-off my phone and running Venom 4.1.0, firmware 3.28.xxx not yet upgraded to 4.xxx and my CID HTC_J15. Would this be safe to flash? TIA
Sent from my HTC One_M8
darkmantra said:
I just s-off my phone and running Venom 4.1.0, firmware 3.28.xxx not yet upgraded to 4.xxx and my CID HTC_J15. Would this be safe to flash? TIA
Sent from my HTC One_M8
Click to expand...
Click to collapse
Probably not. It's meant for Lollipop. Get 4.xx firmware. I'd be more specific, but for some weird reason, you XXXed your actual firmware version.
Thanks better upgrade fw. Will do it later.
Sent from my HTC One_M8
Say, men, can I flash v. 4.3.0 over old one(4.2.0)
HTC Cid-621, S-On, Skydragon 3.1 rom (+ i flashed my beloved Project Era above) - H/K works like a charm!
I've just noticed that version of adsp is 48, not 56, but hk seems to be working
UltraM8 said:
I've just noticed that version of adsp is 48, not 56, but hk seems to be working
Click to expand...
Click to collapse
You didn't flash the ADSP when you flashed to H/K. The ADSP option is in the Aroma install. I just ckecked, and I have v56 on mine.
Also, if you flash back to Boomsound, you can keep the H/K ADSP without re-flashing the BS version. v56 is totally compatible with Boomsound.
xunholyx said:
You didn't flash the ADSP when you flashed to H/K. The ADSP option is in the Aroma install. I just ckecked, and I have v56 on mine.
Also, if you flash back to Boomsound, you can keep the H/K ADSP without re-flashing the BS version. v56 is totally compatible with Boomsound.
Click to expand...
Click to collapse
I've done it twice, I'm s-on so this is why it doesn't flash properly
UltraM8 said:
I've done it twice, I'm s-on so this is why it doesn't flash properly
Click to expand...
Click to collapse
Correct. You can't flash the ADSP while S-On.
Hey
just asking to be sure -
is this thread is the "new" harman kardom mod? meaning its replacing that thread? :
http://forum.xda-developers.com/htc...-harman-kardon-conversion-htc-one-m8-t2827439
If so, is this mod comatible with ARHD?? its sense 7 based
Thanks
good day
thanks for the mod loved it on older ARHD versions especially with my HK AE's
but i cant get the HK - BS Aroma Switcher 4.3.0 to work... i just flash the zip file and when my phone has fully rebooted, there is just no HK setting or whatsoever. it seems to me that nothing was flashed at all maybe you can help me out on this one i'm on ARHD 41.0 on my htc one m8.
greetings from germany
HK/BS Aroma Switcher Causing Errors in Settings?
Hello,
I would first like to thank you for the work done on this mod. The mod works as intended but I have had an issue after installing this mod. It seems to break a few things in Settings.apk. Installing the mod makes Settings.apk force close when pressing the three dots button (which can be seen in the attached screenshot) found under Settings > Accounts & Sync > Google. Is this issue known? Or is this an isolated case. It also makes Settings.apk force close when I connect to a Wi-Fi that has a log-in/Acceptance of Terms page (force closes when page attempts to pop up).
I am running this on a HTC One M8 with rooted Verizon 5.0.1 and TWRP 2.8.6. Phone also has unlocked bootloader and S-Off. No other mods are installed. Thank you for the help in advanced!
adiel91 said:
Hey
just asking to be sure -
is this thread is the "new" harman kardom mod? meaning its replacing that thread? :
http://forum.xda-developers.com/htc...-harman-kardon-conversion-htc-one-m8-t2827439
If so, is this mod comatible with ARHD?? its sense 7 based
Thanks
good day
Click to expand...
Click to collapse
No it's not replacing the original mod, it's packing it differently with restore options in aroma. Also the used set of files has been reworked several times by now so the content might actually differ from the original mod by now. I never checked.
Regarding sense 7: I'm currently only active with my M9 and haven't tried a sense 7 ROM on the M8 - I suggest you backup, then try and report.
---------- Post added at 11:01 PM ---------- Previous post was at 11:00 PM ----------
sypho said:
thanks for the mod loved it on older ARHD versions especially with my HK AE's
but i cant get the HK - BS Aroma Switcher 4.3.0 to work... i just flash the zip file and when my phone has fully rebooted, there is just no HK setting or whatsoever. it seems to me that nothing was flashed at all maybe you can help me out on this one i'm on ARHD 41.0 on my htc one m8.
greetings from germany
Click to expand...
Click to collapse
Very likely you used the wrong recovery. Which one did you use?
You should be using the latest TWRP at least.
---------- Post added at 11:02 PM ---------- Previous post was at 11:01 PM ----------
Chinchillen said:
Hello,
I would first like to thank you for the work done on this mod. The mod works as intended but I have had an issue after installing this mod. It seems to break a few things in Settings.apk. Installing the mod makes Settings.apk force close when pressing the three dots button (which can be seen in the attached screenshot) found under Settings > Accounts & Sync > Google. Is this issue known? Or is this an isolated case. It also makes Settings.apk force close when I connect to a Wi-Fi that has a log-in/Acceptance of Terms page (force closes when page attempts to pop up).
I am running this on a HTC One M8 with rooted Verizon 5.0.1 and TWRP 2.8.6. Phone also has unlocked bootloader and S-Off. No other mods are installed. Thank you for the help in advanced!
Click to expand...
Click to collapse
Did you flash the Verizon version? Did you choose stock Verizon in aroma?
The issue you described is from the modded settings.apk and known.
I flashed the version of HK/BS Aroma Switcher found in the OP (cant post link; has MD5: 515f3b6e90aee64a17f06eb7dd57a5da). I chose the stock Verizon option in the Aroma installer and flashed the HK ADSP.
Flashed this on viperonem8 Sprint Harman Karman m8 with first time flash option clicked. Every thing seems to work on s-on
My device HTC 816 a5_dug
Unlocked bootloader
S-off
I'm trying to install ota update 1.58.401.11 it is give me
Failed to stat "/system/bold.prop" : no such file or directory
And installation aborted :crying:
Please help me
How did you s-off your phone?
Actually I bought it from my cousin with s-off and I flashed the stock recovery and relocked the bootloader to get the ota update installed
But no luck
Please give the spec's of your phone
I mean to say model no. Variant, place: us, asia, etc
singhjot0020 said:
Please give the spec's of your phone
I mean to say model no. Variant, place: us, asia, etc
Click to expand...
Click to collapse
This all what I got
version: 0.5
version-bootloader: 3.19.0.0000
version-baseband: 1.13.3230.16.05
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: FA46BWW01337
imei: 352....
imei2: 352....
meid: 00000000000000
product: a5_dug
platform: hTCBmsm8226
modelid: 0P9C70000
cidnum: 11111111
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 5534924e
hbootpreupdate: 11
gencheckpt: 0
the update coming from Europe
Please help me if you can and forgive me for my bad English
All what i need to get the official mm with no issues about WiFi and touch.
To be able to install the lineageOS 14.1 from the great @bigsupersquid
Because when I flash it coming form kitkat
It's boot fine but when i select the language to start the device reboot and I do it again and it's reboot
I tried many builds and the same happen
You from where?
I mean country
singhjot0020 said:
You from where?
I mean country
Click to expand...
Click to collapse
I'm from Syria and thank you for trying to help me .
the problem is solved and my device running LineageOS 14.1 now.
Bilal Ashkar said:
I'm from Syria and thank you for trying to help me .
the problem is solved and my device running LineageOS 14.1 now.
Click to expand...
Click to collapse
Oh no problem, please let me know how your brother did s-off!
singhjot0020 said:
Oh no problem, please let me know how your brother did s-off!
Click to expand...
Click to collapse
ok ?
Is there anyway to s -off it easily ?
Bilal Ashkar said:
ok ?
Click to expand...
Click to collapse
Hey, please can you tell me the use of doing s-off
Hi,
all i am new here.
I have this version of HTC M9:
Code:
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) serialno: HT53TYJ00276
(bootloader) current-slot:
(bootloader) imei: _hide_
(bootloader) version-main: 4.19.61.1
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U114401031_122.01.61213G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: ORANG001
From US - Orange but i need use it in Czech Republic (i need czech lanuguage, only english - now) and i need correct Europe version. Also i need working OTA after flash so i need lock bootlader again?
Thank you for any reply.
So i was read more and more. Now i know i need S-OFF for putting different version-main then .61 i want Europe .401 but with S-ON, don´t work right? But what about CDMA/GSM version?? Bcs i guess from US it have CDMA so i can not put Europe GSM version. I was find:0PJAIMG_HIMA_UHL_N70_SENSE80_MR_HTC_Europe_4.28.401.3_Radio_01.01_U114401011_117.00.61117G_2_F_release_500500_combined_signed_2_4.zip
And i read there is chance with S-ON put combined_signed version but still i think is problem with CDMA/GSM version.
Please correct me if i am wrong.
Tell me if there is another possibility do it...
Changing SKUs is only possible with S-OFF. No matter whether the RUU is a combined_signed one or not.
I'm not sure why you think that your phone is a US phone. SKU 61 and 401 are both European. You don't have to worry about the GSM/CDMA incompatibility.
Bcs my friend buy it from US ebay that´s why i think it... But if .61 also EU is OK. Thank you for info.