Develop Bugs

[Kernel] Docomo L01E kernel 1.8G ( two cores) 1.67G (four cores)

I have a build a kernel image which lower the voltage and overclock to 1.67G.
But I cannot post on development thread, i post it here.
I used the ramdisk from the unlock bootloader's bootimg, but it is not the original L01E ramdisk.
Can some one provide the stock bootimg? Or provide the bootimg address of the stock rom tot file.
Extract the zip
volume up key + power key to enter bootloader( little kernel or fastboot mode)
fastboot flash boot bootimg
if you failed you can always flash back the bootimg which you installed when you unlock your bootloader.
/////////////////////////////////////////////////
Update new kernel Mar 04 2013
Changes :
1.Up to 1.8 G when running two cores and down to 1.67G when running four cores to improve stability.
2.GPU overclock to 487.5MHz ( improve GLBenchmark by 10%)
3.Replace CPU governor with intellidemend.
4.Lower cpu voltage and bus voltage.
5.L2 cache is overclaocked from 1134Mhz to 1350Mhz
Significant battery improvement can be seen on this kernel.
Known Issue.
DVB one seg is broken due to porting of DVB-T
Please report any bug or unstable issue to improve this kernel.
Thanks.

Re: [Kernel] Docomo L01E kernel 1.7G
Big tnx but how we can flash bootloader if after unlocking bootloader we have grabled bootloader mode.
I can't see norm boot mode.
And what boot.img u need? Stock or unlocked boot.img?
Sent from my L-01E using xda premium

aglaura said:
I have a build a kernel image which lower the voltage and overclock to 1.7G.
But I cannot post on development thread, i post it here.
I used the ramdisk from the unlock bootloader's bootimg, but it is not the original L01E ramdisk.
Can some one provide the stock bootimg? Or provide the bootimg address of the stock rom tot file.
I will attach the bootimg later today.
Extract the zip
volume up key + power key to enter bootloader( little kernel or fastboot mode)
fastboot flash boot bootimg
if you failed you can always flash back the bootimg which you installed when you unlock your bootloader.
Click to expand...
Click to collapse
is it possible to make it into a zip file so we can flash it?
thks

germes81m said:
Big tnx but how we can flash bootloader if after unlocking bootloader we have grabled bootloader mode.
I can't see norm boot mode.
And what boot.img u need? Stock or unlocked boot.img?
Sent from my L-01E using xda premium
Click to expand...
Click to collapse
The unlocked bootloader is fine with fastboot protocol to flash the bootimg.
Which is used to replace the bootimg to root your device.
It is same thing bootimg when you root your device, just with different cpu clock.

gentledroid17 said:
is it possible to make it into a zip file so we can flash it?
thks
Click to expand...
Click to collapse
No, it is easier this way.
You already did this once, if you have root your device.
Thanks

aglaura said:
Can some one provide the stock bootimg? Or provide the bootimg address of the stock rom tot file.
Click to expand...
Click to collapse
This is stock bootimg from Docomo LGOG.

germes81m said:
This is stock bootimg from Docomo LGOG.
Click to expand...
Click to collapse
Thanks, but the charger logo in ramdisk is different from the stock one.
I thinks this one is modified.

aglaura said:
Thanks, but the charger logo in ramdisk is different from the stock one.
I thinks this one is modified.
Click to expand...
Click to collapse
I don't know bro, this is from my Docomo L-01E. I have not other variants

aglaura said:
I have a build a kernel image which lower the voltage and overclock to 1.7G.
But I cannot post on development thread, i post it here.
I used the ramdisk from the unlock bootloader's bootimg, but it is not the original L01E ramdisk.
Can some one provide the stock bootimg? Or provide the bootimg address of the stock rom tot file.
Extract the zip
volume up key + power key to enter bootloader( little kernel or fastboot mode)
fastboot flash boot bootimg
if you failed you can always flash back the bootimg which you installed when you unlock your bootloader.
Click to expand...
Click to collapse
i can't turn on the wifi after flash the fastbot

openglhk said:
i can't turn on the wifi after flash the fastbot
Click to expand...
Click to collapse
Sorry, wifi is fixed now.
This happens when I turn off the rtb function to improve performance.
rtb is the rigister tracing.

aglaura said:
Sorry, wifi is fixed now.
This happens when I turn off the rtb function to improve performance.
rtb is the rigister tracing.
Click to expand...
Click to collapse
That's great! :laugh:
But my phone's battery unable to get fully charge after flash this boot.img
i flash the original boot.img, it works fine.
what's going on?

openglhk said:
That's great! :laugh:
But my phone's battery unable to get fully charge after flash this boot.img
i flash the original boot.img, it works fine.
what's going on?
Click to expand...
Click to collapse
Because I removed LG drivers. The battery is actually fully charged, but did not report to Android APIs.
The LG drivers are added back in this new kernel.
Thanks.

aglaura said:
Because I removed LG drivers. The battery is actually fully charged, but did not report to Android APIs.
The LG drivers are added back in this new kernel.
Thanks.
Click to expand...
Click to collapse
Thanks for reply.You are awesome! :good:

[Q] help me in installing this rom..

my frnd give me this rom and tld me to flash it
but he didn't mentioned that how to flash it
he gave me 3 files
1. d-h.st/afd
2. forum.xda-developers.com/showthread.php?t=2312735
3. forum.xda-developers.com/showthread.php?t=2409687
can anyone say me how to do this???

first of all, make sure your lgog is rooted and unlocked.
then follow the instruction from the thread.. flash the ROM first, then flash the kernel.
but I would suggest you don't do it because by looking at your post, I don't think you know anything about what you intended to do.
read more about custom roms and kernel before trying, don't regret later when you brick your phone..

shirish893 said:
my frnd give me this rom and tld me to flash it
but he didn't mentioned that how to flash it
he gave me 3 files
1. d-h.st/afd
2. forum.xda-developers.com/showthread.php?t=2312735
3. forum.xda-developers.com/showthread.php?t=2409687
can anyone say me how to do this???
Click to expand...
Click to collapse
First, you have to root and unlock your phone. You can skip the flash steps TWRP.
Next, download the file and put 2 Pacman rom and kernel Kite V16 in memory.
Now, reboot the phone and Recovey mode.
wipe done 3 times. Then flash ROM and Kernel 2 files.
Reboot and enjoy.

I suggest using cwm or cwm touch. Twrp gives errors sometimes.
Sent from LG E975 pwd by CM 10.2/smart phones,dumb people.

sianghung said:
first of all, make sure your lgog is rooted and unlocked.
then follow the instruction from the thread.. flash the ROM first, then flash the kernel.
but I would suggest you don't do it because by looking at your post, I don't think you know anything about what you intended to do.
read more about custom roms and kernel before trying, don't regret later when you brick your phone..
Click to expand...
Click to collapse
Its not like that, that i know nothing..
previously i had flash xperia u with many roms...
i just forgot all the steps
i have rooted my phone...
but i want to know that how to unlock my phone( lg e975 indian version)
and after that how to flash this 3 files?

phamluong92 said:
First, you have to root and unlock your phone. You can skip the flash steps TWRP.
Next, download the file and put 2 Pacman rom and kernel Kite V16 in memory.
Now, reboot the phone and Recovey mode.
wipe done 3 times. Then flash ROM and Kernel 2 files.
Reboot and enjoy.
Click to expand...
Click to collapse
how to unlock my lg e975 indian version?
and how to flash this 3 files?

look for FreeGee in market, it will unlock the bootloader and install either CWM / TWRP based on your choice.

sianghung said:
look for FreeGee in market, it will unlock the bootloader and install either CWM / TWRP based on your choice.
Click to expand...
Click to collapse
bootloader unlocked.. i installed ROM Manager from play store and rebooted into recovery.. thn i installed a kernel name "kite" .. now when i power on the device.. its shows LG for one second then black screen.. what to do??? i cant access my phone :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:

shirish893 said:
bootloader unlocked.. i installed ROM Manager from play store and rebooted into recovery.. thn i installed a kernel name "kite" .. now when i power on the device.. its shows LG for one second then black screen.. what to do??? i cant access my phone :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
if you flash kite kernel over stock rom, you probably bricked your phone.

sianghung said:
if you flash kite kernel over stock rom, you probably bricked your phone.
Click to expand...
Click to collapse
how to fix it?

shirish893 said:
how to fix it?
Click to expand...
Click to collapse
try your luck in kite kernel thread, maybe someone have done similar things like what you did and have a solution for that.
I have no idea as I am still using the stock rom and haven't have the intention to flash my phone yet, so din't do much research on it.
Still the same advice, make sure to read & search before start doing anything. Cry won't help when you bricked your phone.

sianghung said:
try your luck in kite kernel thread, maybe someone have done similar things like what you did and have a solution for that.
I have no idea as I am still using the stock rom and haven't have the intention to flash my phone yet, so din't do much research on it.
Still the same advice, make sure to read & search before start doing anything. Cry won't help when you bricked your phone.
Click to expand...
Click to collapse
i flashed my phone with stock rom
now i want to know how to install this pacman rom
http://forum.xda-developers.com/showthread.php?t=2409687
can u please tell me the process in detail...

Please,stop poluting the forum with useless threads. If you have questions related to a rom,ask them in the thread. What if every newcomer would open a thread for every question??there are posting rules,read them first.
Sent from LG E975 pwd by CM 10.2/smart phones,dumb people.

shirish893 said:
how to unlock my lg e975 indian version?
and how to flash this 3 files?
Click to expand...
Click to collapse
Multi_tools to unlock LOG.
after unlocking bootloader, CWM recovery is available. Put 2 file: Rom.zip and Kernel.zip to sdcard or memory. Reboot to Recovery. Wipe Data, cache,and wipe davik cache.
Flash ROM, flash Kernel. Reboot.

phamluong92 said:
Multi_tools to unlock LOG.
after unlocking bootloader, CWM recovery is available. Put 2 file: Rom.zip and Kernel.zip to sdcard or memory. Reboot to Recovery. Wipe Data, cache,and wipe davik cache.
Flash ROM, flash Kernel. Reboot.
Click to expand...
Click to collapse
Nice. What is the ROM included?

MitoTakatori said:
Nice. What is the ROM included?
Click to expand...
Click to collapse
Rom.zip and Kernel.zip is your file want flash. kernel is optional.

[Q] Help and idiot out? ARC S Flashing

Hello,
I would like to do the following to my Arc S.
Flash new recovery
Flash new kernel (fusion)
Flash SJB latest version (7 i think)
I have been going arround the forums for 2 days now trying to figure it out but have been unable to do so.
The steps i need help with are as follows:
Where do i get recovery image for my ARC S?
i understand that using fastboot to flash it onto phone is rather easy.
As i understand after i get new recovery i can flash kernel and new rom from recovery mode?
How do i revert to android 2.3.4 4.0.2.A.0.62 if i dont like new rom / kernel?
GREAT BIG THANKS!

AshrakTheWhite said:
Hello,
I would like to do the following to my Arc S.
Flash new recovery
Flash new kernel (fusion)
Flash SJB latest version (7 i think)
I have been going arround the forums for 2 days now trying to figure it out but have been unable to do so.
The steps i need help with are as follows:
Where do i get recovery image for my ARC S?
i understand that using fastboot to flash it onto phone is rather easy.
As i understand after i get new recovery i can flash kernel and new rom from recovery mode?
How do i revert to android 2.3.4 4.0.2.A.0.62 if i dont like new rom / kernel?
GREAT BIG THANKS!
Click to expand...
Click to collapse
First of all you have to unlock the bootloader and you have to be on ICS
Then you can flash the kernel[with flashtool].
after flashing the kernel u can enter the recovery by presing the volume down buton until it brings you to cwm.
and the follow the instruction for instaling the rom
Good luck

theanelfro said:
First of all you have to unlock the bootloader and you have to be on ICS
Then you can flash the kernel[with flashtool].
after flashing the kernel u can enter the recovery by presing the volume down buton until it brings you to cwm.
and the follow the instruction for instaling the rom
Good luck
Click to expand...
Click to collapse
Thanks for answer.
If my bootloader is "unlock available: yes" is that ok?
Will the fusion kernel 5.4 work with default rom's ? like GB 2.3?
how do i revert to stock kernel after flashing fusion? Emma?
Is recovery stored on a seperate partition that is not the rom / system partition? so i will always have recovery available?
Thank you!

AshrakTheWhite said:
Thanks for answer.
If my bootloader is "unlock available: yes" is that ok?
Will the fusion kernel 5.4 work with default rom's ? like GB 2.3?
how do i revert to stock kernel after flashing fusion? Emma?
Is recovery stored on a seperate partition that is not the rom / system partition? so i will always have recovery available?
Thank you!
Click to expand...
Click to collapse
Yes it is, but you must unlock it.[search in the forum]
fusion is for jelly bean roms, not for GB so far i know,.
if you want to revert to from ICS to GB you just have to flash the ftf.file from gb .62
if you have any problem tell me i will try to help you.
press thanks if i helped you!
Here is step by step how to unlock it

AshrakTheWhite said:
Thanks for answer.
If my bootloader is "unlock available: yes" is that ok?
Will the fusion kernel 5.4 work with default rom's ? like GB 2.3?
how do i revert to stock kernel after flashing fusion? Emma?
Is recovery stored on a seperate partition that is not the rom / system partition? so i will always have recovery available?
Thank you!
Click to expand...
Click to collapse
Bootloader can be unlocked
No. Fusion works with only custom JB ROM. For stock ROM use stock kernel.
You can use EMMA or Flashtool to flash an FTF file. Note that this will wipe your personal data.
No. The recovery that you're using now can either be stored on /system partition or merged with kernel. The one stored in /system requires root before you can install it.
僕のLT18iから送られてきた

Hey i got it done! i love sjb 7 its sick fast!
I first unlocked bootloader, after which the phone would no longer go past SE logo ( i had installed CWM for default rom and bootlocker blew up the kernel probobly)
after which i flashed Fusion 5.4 with fastboot
and then i applied SJB from SD card.
I did not think it would be that easy. it was.
Thanks to all and everyone who posted here got a Thanks

AshrakTheWhite said:
Hey i got it done! i love sjb 7 its sick fast!
I first unlocked bootloader, after which the phone would no longer go past SE logo ( i had installed CWM for default rom and bootlocker blew up the kernel probobly)
after which i flashed Fusion 5.4 with fastboot
and then i applied SJB from SD card.
I did not think it would be that easy. it was.
Thanks to all and everyone who posted here got a Thanks
Click to expand...
Click to collapse
congz

[D80220H][Bump!] Original prerooted stock D80220H flashable zip for Bumped recovery

Hello,
This thread to share with you this zip that contains the originals partitions of D80220H version, all except the recovery, and wich is prerooted.
It is only for those who are under bumped recovery(@blastagator TWRP ).
Before the flash, wipe system,data,cache and dalvick recommended.
After the flash you'll have a pure stock prerooted D80220H open euro firmware which keeps your custom bumped recovery.
Download
https://www.androidfilehost.com/?fid=95916177934521247
Miror on mega (great thank's to @skithor):
https://mega.co.nz/#!qNEyVC7S!mDpzgILJdMr79gig8cIczhH7WLCTCtonXgxdAnBQjSA
md5: f72557eeb2db0a1ff8d5c5ad404a32f3
Q/A:
Q: Does this rom contains bumped kernel ?
A: No need, this is just the original 20H kernel that contains the original LG signature (so no need to inject original LG signature with Bump!)
Q: What is included in the zip ?
A: all D80220h originals partitions (modem, aboot,boot,laf,sbl1,rpm,persist,dbi,cust,tz), except the recovery.
To be more clear, because that was asked later in the thread, baseband=modem,boot=kernel,aboot =bootloader. So yes it contains pure stock 20H booloader, pure stock not modified 20H kernel and 20H baseband (fr modem, that can be easily changed after if you want/need).
Q; It's for 16 or 32 Go ?
A: Both
Q: Can i flash these rom if i have JB bootstack (JB bootloader and old partitions (aboot,laf,sbl1,rpm,persist,dbi,tz) ?
A: Yes if you have a bumped recovery (@blastagator TWRP )
Q: how to acces to bumped custom recovery with hard keys, in this configuration (20H bootloader) ?
A: Since the phone turned off, press power + vol down, release as soon as the logo appears and then hold vol down + vol up.
Q: if i want to return to old bootstack, how to proceed please ?
A: After a lot of test, best and shorter way is to use @Cloudyfa autorec. It downgrades bootloader (aboot) to Jelly Bean, replace the recovery by a lokified TWRP 2.7.0.0, and replace the kernel by a lokified one. It flashes laf (download mode) too. You can update TWRP and/or kernel after, if you wish.
Q: if i want to return to kitkat bootstack after a try on JB bootstack, how to proceed please ?
A: I made this zip that can be flashed from recovery. Before flashing it, you must have flashed bumped recovery => (@blastagator TWRP ).
It contains 20H originals bootstack (bootloader + others partitions => aboot,tz,sbl1,rpm,persist,laf,dbi) + originals 20H kernel with original 20H system/lib/modules:
It can be download here: https://www.androidfilehost.com/?fid=95916177934522374
Thank's to:
Codefire team for Bump!

Great job! :good: works great on my device, thanks a lot :victory:

Great! You're Awesome mate :good:

Interesting.. Is it possible to have kk bootloader and 20h kernel combine with cloudy g3 2.1 rom?

Doublewise said:
Interesting.. Is it possible to have kk bootloader and 20h kernel combine with cloudy g3 2.1 rom?
Click to expand...
Click to collapse
I do not know, but in theory it should be possible, I think.
It would be better to put the question to @Cloudyfa
Care must be taken in system/lib/modules, because these files are modified with a lokified kernel that boot behind a bootloader JB.
What I am saying is that if we interchange the lokified kernel with original 20H, we need probably replace the modules file by the stock one too.
However, it would be better to seek expert advice on the subject of @Cloudyfa

6ril1 said:
I do not know, but in theory it should be possible, I think.
It would be better to put the question to @Cloudyfa
Care must be taken in system/lib/modules, because these files are modified with a lokified kernel that boot behind a bootloader JB.
What I am saying is that if we interchange the lokified kernel with original 20H, we need probably replace the modules file by the stock one too.
However, it would be better to seek expert advice on the subject of @Cloudyfa
Click to expand...
Click to collapse
Ouch, I thought it as simple as flashing kk bootloader and 20h kernel on top of custom Rom. I almost ask you to create flashable 20h kernel [emoji4]

it's seems so well. but a few questions. can we use this with art (if there is not, how can we use with art) and add the recent app buttons without xposed?

Doublewise said:
Ouch, I thought it as simple as flashing kk bootloader and 20h kernel on top of custom Rom. I almost ask you to create flashable 20h kernel [emoji4]
Click to expand...
Click to collapse
I did it for my first prerooted D80220H that contained lokified Cloudy KC kernel, the zip is here: http://forum.xda-developers.com/showpost.php?p=58564605&postcount=104
This zip contains 20 H kernel + 20H laf + 20H modules + 20h bootloader.
That's enough on my rom and it works well on it because I know this rom flashed the others partitions part of the boot stack (dbi,persist,rpm,sbl1,tz), so the device already contains the 20H version of them.
For other stock based rom, it would be better to add 20H dbi,persist,rpm,sbl1,tz because i can not know if these partitions (dbi,persist,rpm,sbl1,tz) where updated on the device from JB to KK one day.
edit: i change the zip for including all needed partitions for all situations (20 H kernel + 20H modules + 20h bootloader + 20 H dbi,persist,rpm,sbl1,tz,laf)
It's hard to explain and I do not speak English very well, I hope I can make myself understood
If we look at @dorimanx flashable zip for migrate to 20H bootloader we can see it integrates dbi,persist,rpm,sbl1,tz + laf
http://www.dorimanx.com/LG/default-kernels/KK-20H-D802-BOOT-LOADER.zip
and in his flashable zip for migrate to stock 20H kernel it integrates 20h kernel (boot) and system/lib/modules
http://www.dorimanx.com/LG/default-kernels/ORIGINAL-KK-20H-D802-KERNEL-KK-aboot.zip

please, it's impossible to enter into recovery with hard keys...why?

6ril1 said:
A: all D80220h originals partition (modem, aboot,boot,laf,sbl1,rpm,persist,dbi,cust,tz), except the recovery
Click to expand...
Click to collapse
So? Which Country?
it shouldnt be safe to flash wrong modem

linux33it said:
please, it's impossible to enter into recovery with hard keys...why?
Click to expand...
Click to collapse
Since the phone turned off, press power + vol down, release as soon as the logo appears and then hold vol down + vol up.
4Freedom said:
So? Which Country?
it shouldnt be safe to flash wrong modem
Click to expand...
Click to collapse
Here it's fr modem and it can be changed so easily.

6ril1 said:
I did it for my first prerooted D80220H that contained lokified Cloudy KC kernel, the zip is here: http://forum.xda-developers.com/showpost.php?p=58564605&postcount=104
This zip contains 20 H kernel + 20H laf + 20H modules + 20h bootloader.
That's enough on my rom and it works well on it because I know this rom flashed the others partitions part of the boot stack (dbi,persist,rpm,sbl1,tz), so the device already contains the 20H version of them.
For other stock based rom, it would be better to add 20H dbi,persist,rpm,sbl1,tz because i can not know if these partitions (dbi,persist,rpm,sbl1,tz) where updated on the device from JB to KK one day.
It's hard to explain and I do not speak English very well, I hope I can make myself understood
If we look at @dorimanx flashable zip for migrate to 20H bootloader we can see it integrates dbi,persist,rpm,sbl1,tz + laf
http://www.dorimanx.com/LG/default-kernels/KK-20H-D802-BOOT-LOADER.zip
and in his flashable zip for migrate to stock 20H kernel it integrates 20h kernel (boot) and system/modules
http://www.dorimanx.com/LG/default-kernels/ORIGINAL-KK-20H-D802-KERNEL-KK-aboot.zip
Click to expand...
Click to collapse
Hi
I used autorec to downgrade bootloader then i flashed twrp 2.8.4 and then the d80220d original stock kernel from cloudy that enables knock code. Can i flash the 80220h kernel you linked if i flash first the bumped twrp?
Cheers
PS: THANKS FOR YOUR AWESOME WORK (Y)

Cienight said:
Hi
I used autorec to downgrade bootloader then i flashed twrp 2.8.4 and then the d80220d original stock kernel from cloudy that enables knock code. Can i flash the 80220h kernel you linked if i flash first the bumped twrp?
Cheers
PS: THANKS FOR YOUR AWESOME WORK (Y)
Click to expand...
Click to collapse
Sorry, I'm very busy because I have to take care of a neighbor in agony (terminal cancer), so I answer briefly. I will keep this thread, including by completing Part question / answer as soon as available, thank you for your indulgence.
To be sure you have everything you need, you can flash the two @dorimanx package (bootloader + kernel )
http://www.dorimanx.com/LG/default-kernels/KK-20H-D802-BOOT-LOADER.zip
http://www.dorimanx.com/LG/default-kernels/ORIGINAL-KK-20H-D802-KERNEL-KK-aboot.zip
because if you want to flash original 20H kernel you must have 20h (KK) bootloader (bootstack) too (and of course bumped recovery), assuming you are on 20H stock (?)

6ril1 said:
Sorry, I'm very busy because I have to take care of a neighbor in agony (terminal cancer), so I answer briefly. I will keep this thread, including by completing Part question / answer as soon as available, thank you for your indulgence.
To be sure you have everything you need, you can flash the two @dorimanx package (bootloader + kernel )
http://www.dorimanx.com/LG/default-kernels/KK-20H-D802-BOOT-LOADER.zip
http://www.dorimanx.com/LG/default-kernels/ORIGINAL-KK-20H-D802-KERNEL-KK-aboot.zip
because if you want to flash original 20H kernel you must have 20h (KK) bootloader (bootstack) too (and of course bumped recovery), assuming you are on 20H stock (?)
Click to expand...
Click to collapse
i flashed the bumped recovery and then flashed the kk bootloader but i get a black screen after boot and nothing happens,any ideas?

Cienight said:
i flashed the bumped recovery and then flashed the kk bootloader but i get a black screen after boot and nothing happens,any ideas?
Click to expand...
Click to collapse
You've flashed @dorimanx 20H bootlader(bootstack) zip ?
And the kernel ?
And what rom do you use ?

stock d80220h and i flashed the dorimanx bootloader.
the kernel is the stock 80220d
how can i get into recovery?
PS i managed to get into twrp ,flashed the kernel and now everythings ok
Im glad for your help,and i hope a miracle happens to save your neighbor from his suffering.
Peace

Cienight said:
stock d80220h and i flashed the dorimanx bootloader.
the kernel is the stock 80220d
how can i get into recovery?
Click to expand...
Click to collapse
It should not reboot between the bootloader flash and the kernel flash...
I have already given the method to have recovery access with hard keys a few posts earlier...
edit: I see you've edited your post. Nice to see all is ok now. It's a very difficult situation with my neighbor and his family. You can check the thank's button for thanking. Miracle lived for seven year, but now this is the end. Peace

6ril1 said:
It should not reboot between the bootloader flash and the kernel flash...
I have already given the method to have recovery access with hard keys a few posts earlier...
Click to expand...
Click to collapse
yup,got it sorted with your prementioned method.
Thanks!
the 20h kernel fixes the redraw issues on the home when waking the phone

6ril1 said:
Sorry, I'm very busy because I have to take care of a neighbor in agony (terminal cancer), so I answer briefly. I will keep this thread, including by completing Part question / answer as soon as available, thank you for your indulgence.
To be sure you have everything you need, you can flash the two @dorimanx package (bootloader + kernel )
http://www.dorimanx.com/LG/default-kernels/KK-20H-D802-BOOT-LOADER.zip
http://www.dorimanx.com/LG/default-kernels/ORIGINAL-KK-20H-D802-KERNEL-KK-aboot.zip
because if you want to flash original 20H kernel you must have 20h (KK) bootloader (bootstack) too (and of course bumped recovery), assuming you are on 20H stock (?)
Click to expand...
Click to collapse
In dorimanx site there is flashable kk 20h baseband. Is it the same with kk 20d baseband? Is it important to flash 20h baseband also?

Rom is perfect, but have lot of LG balast. Any chance add Aroma options for debload and instal AdAway? Thank you

[BOOTLOADER] Bootloader Unlocker/Locker from recovery

Hi guys
Bootloader unlockers/lockers from recovery are here.
Easy method to unlock & relock Optimus G bootloader.​
Good things about these zips:
1. No running OS is needed.
2. You don't have to be on lg stock roms.
3. Work much faster & easier. Less than a minute.
4. You will still have custom recovery after locking your bl.
How to use?
Using bumped recovery, flash them like other zips in recovery.
Don't have recovery?
Flash a bumped recovery img (inside of the attached zips) with an app like Flashify or Kernel Adiutor or etc.
Note: BL unlockers flash unlocked bootloader + Philz/CWM recovery. Booting up on unlocked BL needs unlocked kernel.
So in stock roms, don't forget to flash an unlocked kernel, like unlocked stock kernel or solid kernel or etc...
Anyway in case of any problem, there is no worry because you can always access to Philz touch(for E975) or CWM(for other variants) recovery.
I could only test E975 ones. Other variants unlockers must also work. But you are the testers...
Mirror links (files folder):
https://mega.nz/#F!4JwWCJZB!3jFrgKSdRhAhdwLadD_YaQ

Please Note:
1. I'm waiting for your feedbacks. Please give feedback with name of your variants.
2. I didn't have stock bootloader files for other variants, so I could make bootloader locker for E975 only.
Some guides:
1. How to flash boot/recovery .img in Kernel Auditor?
In the Backup section of the app, use Flash IMG button, then select your .img file (extract them from zips), then select the partition to flash (boot/recovery).
2. You can use your own bumped recovery img, using the bump tool
3. On locked bootloader you can enter to recovery with hardreset method.
4. After flashing Makoz30f Flasher (not after unlocking, unlocking is ok), it will also flash bootloader tz.img & rpm.img.
Flashing Mako rpm.img will cause false heat issue on LG roms so your screen brightness will not go further than 63%(& cpu clock speed further than 1188000). E975 unlocker & relocker zips will replace tz & rpm partitions with stock ones. So you can use them to fix this problem.

Whats mean stockboot?
Btw thanks, no instal freegee to unlock bl , nice job

christboanerges said:
Whats mean stockboot?
Btw thanks, no instal freegee to unlock bl , nice job
Click to expand...
Click to collapse
for other variants of og, after unlocking, you need to flash an unlocked kernel, but for E975, if you use the zip that has stockboot, you dont need to do anything & it flashes the kernel for you.

What's it use for ?

paul_zm said:
What's it use for ?
Click to expand...
Click to collapse
For someone who want to lock or unlock bootloader without use anyapp. Btw thanks author.

tiennhu89 said:
For someone who want to lock or unlock bootloader without use anyapp. Btw thanks author.
Click to expand...
Click to collapse
Thank you guys.
Since Gee3 rom has better speed & LTE support in our stock roms, I'm making Gee3 v1.3 & I'm testing it, but with this kind of statistics , it seems there's no motivation no replays about its working on other variants...

M.M.K said:
Thank you guys, but you may press thanks if you really like it
Since Gee3 rom has better speed & LTE support in our stock roms, I'm making Gee3 v1.3 & I'm testing it, but with this kind of statistics , there's no motivation no replays about its working on other variants...
Click to expand...
Click to collapse
waiting for this great update, and I encourage that there are still people waiting to see more of our og thank you
Google translator

MMK instruction
Hi MMK,
I'm a total newbie and it's the first time i've ever flashed a device, my E975 is completely stock (but i've root privilege and su is installed). I've installed flashify and downloaded a zip (i don't have a special kernel at the moment do you suggest stockboot). Now i've unzipped the folder on the phone but i'm uncertain about what to do now, there are a lot of images and i really don't know where to flash what. Can you suggest a more detailed procedure?
Thank you for the effort and thanks in advance.

great job bro ^_^

akula.ee said:
Hi MMK,
I'm a total newbie and it's the first time i've ever flashed a device, my E975 is completely stock (but i've root privilege and su is installed). I've installed flashify and downloaded a zip (i don't have a special kernel at the moment do you suggest stockboot). Now i've unzipped the folder on the phone but i'm uncertain about what to do now, there are a lot of images and i really don't know where to flash what. Can you suggest a more detailed procedure?
Thank you for the effort and thanks in advance.
Click to expand...
Click to collapse
Hi, If your bootloader isn't already unlocked:
In flashify you must choose recovery image from flash section, then choose the Philz.recovery.img you've extracted.
Then press reboot to recovery from options & simply flash the zips in recovery mode to lock or unlock your bootloader.
Make sure to use your own variant zip.

Hi MMK . i wang to offline charging on sling rom . how i have to do .
my device e970 . TWRP 2.8.5 .I'm using sling kahroba right now.

Chum.zuizui said:
Hi MMK . i wang to offline charging on sling rom . how i have to do .
my device e970 . TWRP 2.8.5 .I'm using sling kahroba right now.
Click to expand...
Click to collapse
If you want stock based roms like Sling Kahroba,
Before unlocking, flash a bumped recovery & install the bumped Sling Kahroba... Easy.
PS: you can't use lockers because they're only for E975 variant.

M.M.K said:
Hi guys
Bootloader unlockers/lockers from recovery are here.
Easy method to unlock & relock Optimus G bootloader.​
Good things about these zips:
1. No running OS is needed.
2. You don't have to be on lg stock roms.
3. Works much faster & easier. Less than a minute.
4. You will still have custom recovery after locking your bl.
How to use?
Using bumped recovery, flash them like other zips in recovery.
Don't have recovery?
Flash a bumped recovery img (inside attached zips) with an app like Flashify or Kernel Adiutor or etc.
Note: These zips flash bootloader + Philz/CWM recovery.
So in stock roms, don't forget to flash an unlocked kernel, like unlocked stock kernel or solid kernel or etc.
In case of any problem, there is no worry because you always access to Philz touch(for E975) or CWM(for other variants) recovery.
If you provide me other variants stock bootloader files, I can make bootloader lockers for them too.
I could only test E975 ones. Other variants unlockers must also work. But you are the testers...
Mirror links (files folder):
https://mega.nz/#F!4JwWCJZB!3jFrgKSdRhAhdwLadD_YaQ
Click to expand...
Click to collapse
Worked perfectly on my E975. Used bootloader locker+stockboot. Well done.

ppswaroopa said:
Worked perfectly on my E975. Used bootloader locker+stockboot. Well done.
Click to expand...
Click to collapse
Made for convenience
Thanks for the result.

Worked flawless in my E977 :good:

I need to unlock my bootloader. I used to do it with freegee but it doesnt work no more. Can i do it with this method? if so let me know guyz
Im on stock rom with locked bootloader BTW

HeXoR007 said:
I need to unlock my bootloader. I used to do it with freegee but it doesnt work no more. Can i do it with this method? if so let me know guyz
Im on stock rom with locked bootloader BTW
Click to expand...
Click to collapse
Check your variant & go for it...
I've described what you should do on stock rom & locked bl.
Start with Flashify & follow the procedure.
Mr.MEX bootloader unlocker also works...

New bootloader Z30F (boot-z30f.zip):
https://yadi.sk/d/GqqvKSddenX5R/MAKO BOOT MOD TESTED/LG Optimus G
Go to recovery, flash zip, enjoy!

Mr.MEX said:
New bootloader Z30F (boot-z30f.zip):
https://yadi.sk/d/GqqvKSddenX5R/MAKO BOOT MOD TESTED/LG Optimus G
Go to recovery, flash zip, enjoy!
Click to expand...
Click to collapse
whats the difference with the z30f from here? http://forum.xda-developers.com/nexus-4/general/nexus-4-bootloader-collection-t2105983