[D80220H][Bump!] Original prerooted stock D80220H flashable zip for Bumped recovery - G2 Android Development (D802)

Hello,
This thread to share with you this zip that contains the originals partitions of D80220H version, all except the recovery, and wich is prerooted.
It is only for those who are under bumped recovery(@blastagator TWRP ).
Before the flash, wipe system,data,cache and dalvick recommended.
After the flash you'll have a pure stock prerooted D80220H open euro firmware which keeps your custom bumped recovery.
Download
https://www.androidfilehost.com/?fid=95916177934521247
Miror on mega (great thank's to @skithor):
https://mega.co.nz/#!qNEyVC7S!mDpzgILJdMr79gig8cIczhH7WLCTCtonXgxdAnBQjSA
md5: f72557eeb2db0a1ff8d5c5ad404a32f3
Q/A:
Q: Does this rom contains bumped kernel ?
A: No need, this is just the original 20H kernel that contains the original LG signature (so no need to inject original LG signature with Bump!)
Q: What is included in the zip ?
A: all D80220h originals partitions (modem, aboot,boot,laf,sbl1,rpm,persist,dbi,cust,tz), except the recovery.
To be more clear, because that was asked later in the thread, baseband=modem,boot=kernel,aboot =bootloader. So yes it contains pure stock 20H booloader, pure stock not modified 20H kernel and 20H baseband (fr modem, that can be easily changed after if you want/need).
Q; It's for 16 or 32 Go ?
A: Both
Q: Can i flash these rom if i have JB bootstack (JB bootloader and old partitions (aboot,laf,sbl1,rpm,persist,dbi,tz) ?
A: Yes if you have a bumped recovery (@blastagator TWRP )
Q: how to acces to bumped custom recovery with hard keys, in this configuration (20H bootloader) ?
A: Since the phone turned off, press power + vol down, release as soon as the logo appears and then hold vol down + vol up.
Q: if i want to return to old bootstack, how to proceed please ?
A: After a lot of test, best and shorter way is to use @Cloudyfa autorec. It downgrades bootloader (aboot) to Jelly Bean, replace the recovery by a lokified TWRP 2.7.0.0, and replace the kernel by a lokified one. It flashes laf (download mode) too. You can update TWRP and/or kernel after, if you wish.
Q: if i want to return to kitkat bootstack after a try on JB bootstack, how to proceed please ?
A: I made this zip that can be flashed from recovery. Before flashing it, you must have flashed bumped recovery => (@blastagator TWRP ).
It contains 20H originals bootstack (bootloader + others partitions => aboot,tz,sbl1,rpm,persist,laf,dbi) + originals 20H kernel with original 20H system/lib/modules:
It can be download here: https://www.androidfilehost.com/?fid=95916177934522374
Thank's to:
Codefire team for Bump!

Great job! :good: works great on my device, thanks a lot :victory:

Great! You're Awesome mate :good:

Interesting.. Is it possible to have kk bootloader and 20h kernel combine with cloudy g3 2.1 rom?

Doublewise said:
Interesting.. Is it possible to have kk bootloader and 20h kernel combine with cloudy g3 2.1 rom?
Click to expand...
Click to collapse
I do not know, but in theory it should be possible, I think.
It would be better to put the question to @Cloudyfa
Care must be taken in system/lib/modules, because these files are modified with a lokified kernel that boot behind a bootloader JB.
What I am saying is that if we interchange the lokified kernel with original 20H, we need probably replace the modules file by the stock one too.
However, it would be better to seek expert advice on the subject of @Cloudyfa

6ril1 said:
I do not know, but in theory it should be possible, I think.
It would be better to put the question to @Cloudyfa
Care must be taken in system/lib/modules, because these files are modified with a lokified kernel that boot behind a bootloader JB.
What I am saying is that if we interchange the lokified kernel with original 20H, we need probably replace the modules file by the stock one too.
However, it would be better to seek expert advice on the subject of @Cloudyfa
Click to expand...
Click to collapse
Ouch, I thought it as simple as flashing kk bootloader and 20h kernel on top of custom Rom. I almost ask you to create flashable 20h kernel [emoji4]

it's seems so well. but a few questions. can we use this with art (if there is not, how can we use with art) and add the recent app buttons without xposed?

Doublewise said:
Ouch, I thought it as simple as flashing kk bootloader and 20h kernel on top of custom Rom. I almost ask you to create flashable 20h kernel [emoji4]
Click to expand...
Click to collapse
I did it for my first prerooted D80220H that contained lokified Cloudy KC kernel, the zip is here: http://forum.xda-developers.com/showpost.php?p=58564605&postcount=104
This zip contains 20 H kernel + 20H laf + 20H modules + 20h bootloader.
That's enough on my rom and it works well on it because I know this rom flashed the others partitions part of the boot stack (dbi,persist,rpm,sbl1,tz), so the device already contains the 20H version of them.
For other stock based rom, it would be better to add 20H dbi,persist,rpm,sbl1,tz because i can not know if these partitions (dbi,persist,rpm,sbl1,tz) where updated on the device from JB to KK one day.
edit: i change the zip for including all needed partitions for all situations (20 H kernel + 20H modules + 20h bootloader + 20 H dbi,persist,rpm,sbl1,tz,laf)
It's hard to explain and I do not speak English very well, I hope I can make myself understood
If we look at @dorimanx flashable zip for migrate to 20H bootloader we can see it integrates dbi,persist,rpm,sbl1,tz + laf
http://www.dorimanx.com/LG/default-kernels/KK-20H-D802-BOOT-LOADER.zip
and in his flashable zip for migrate to stock 20H kernel it integrates 20h kernel (boot) and system/lib/modules
http://www.dorimanx.com/LG/default-kernels/ORIGINAL-KK-20H-D802-KERNEL-KK-aboot.zip

please, it's impossible to enter into recovery with hard keys...why?

6ril1 said:
A: all D80220h originals partition (modem, aboot,boot,laf,sbl1,rpm,persist,dbi,cust,tz), except the recovery
Click to expand...
Click to collapse
So? Which Country?
it shouldnt be safe to flash wrong modem

linux33it said:
please, it's impossible to enter into recovery with hard keys...why?
Click to expand...
Click to collapse
Since the phone turned off, press power + vol down, release as soon as the logo appears and then hold vol down + vol up.
4Freedom said:
So? Which Country?
it shouldnt be safe to flash wrong modem
Click to expand...
Click to collapse
Here it's fr modem and it can be changed so easily.

6ril1 said:
I did it for my first prerooted D80220H that contained lokified Cloudy KC kernel, the zip is here: http://forum.xda-developers.com/showpost.php?p=58564605&postcount=104
This zip contains 20 H kernel + 20H laf + 20H modules + 20h bootloader.
That's enough on my rom and it works well on it because I know this rom flashed the others partitions part of the boot stack (dbi,persist,rpm,sbl1,tz), so the device already contains the 20H version of them.
For other stock based rom, it would be better to add 20H dbi,persist,rpm,sbl1,tz because i can not know if these partitions (dbi,persist,rpm,sbl1,tz) where updated on the device from JB to KK one day.
It's hard to explain and I do not speak English very well, I hope I can make myself understood
If we look at @dorimanx flashable zip for migrate to 20H bootloader we can see it integrates dbi,persist,rpm,sbl1,tz + laf
http://www.dorimanx.com/LG/default-kernels/KK-20H-D802-BOOT-LOADER.zip
and in his flashable zip for migrate to stock 20H kernel it integrates 20h kernel (boot) and system/modules
http://www.dorimanx.com/LG/default-kernels/ORIGINAL-KK-20H-D802-KERNEL-KK-aboot.zip
Click to expand...
Click to collapse
Hi
I used autorec to downgrade bootloader then i flashed twrp 2.8.4 and then the d80220d original stock kernel from cloudy that enables knock code. Can i flash the 80220h kernel you linked if i flash first the bumped twrp?
Cheers
PS: THANKS FOR YOUR AWESOME WORK (Y)

Cienight said:
Hi
I used autorec to downgrade bootloader then i flashed twrp 2.8.4 and then the d80220d original stock kernel from cloudy that enables knock code. Can i flash the 80220h kernel you linked if i flash first the bumped twrp?
Cheers
PS: THANKS FOR YOUR AWESOME WORK (Y)
Click to expand...
Click to collapse
Sorry, I'm very busy because I have to take care of a neighbor in agony (terminal cancer), so I answer briefly. I will keep this thread, including by completing Part question / answer as soon as available, thank you for your indulgence.
To be sure you have everything you need, you can flash the two @dorimanx package (bootloader + kernel )
http://www.dorimanx.com/LG/default-kernels/KK-20H-D802-BOOT-LOADER.zip
http://www.dorimanx.com/LG/default-kernels/ORIGINAL-KK-20H-D802-KERNEL-KK-aboot.zip
because if you want to flash original 20H kernel you must have 20h (KK) bootloader (bootstack) too (and of course bumped recovery), assuming you are on 20H stock (?)

6ril1 said:
Sorry, I'm very busy because I have to take care of a neighbor in agony (terminal cancer), so I answer briefly. I will keep this thread, including by completing Part question / answer as soon as available, thank you for your indulgence.
To be sure you have everything you need, you can flash the two @dorimanx package (bootloader + kernel )
http://www.dorimanx.com/LG/default-kernels/KK-20H-D802-BOOT-LOADER.zip
http://www.dorimanx.com/LG/default-kernels/ORIGINAL-KK-20H-D802-KERNEL-KK-aboot.zip
because if you want to flash original 20H kernel you must have 20h (KK) bootloader (bootstack) too (and of course bumped recovery), assuming you are on 20H stock (?)
Click to expand...
Click to collapse
i flashed the bumped recovery and then flashed the kk bootloader but i get a black screen after boot and nothing happens,any ideas?

Cienight said:
i flashed the bumped recovery and then flashed the kk bootloader but i get a black screen after boot and nothing happens,any ideas?
Click to expand...
Click to collapse
You've flashed @dorimanx 20H bootlader(bootstack) zip ?
And the kernel ?
And what rom do you use ?

stock d80220h and i flashed the dorimanx bootloader.
the kernel is the stock 80220d
how can i get into recovery?
PS i managed to get into twrp ,flashed the kernel and now everythings ok
Im glad for your help,and i hope a miracle happens to save your neighbor from his suffering.
Peace

Cienight said:
stock d80220h and i flashed the dorimanx bootloader.
the kernel is the stock 80220d
how can i get into recovery?
Click to expand...
Click to collapse
It should not reboot between the bootloader flash and the kernel flash...
I have already given the method to have recovery access with hard keys a few posts earlier...
edit: I see you've edited your post. Nice to see all is ok now. It's a very difficult situation with my neighbor and his family. You can check the thank's button for thanking. Miracle lived for seven year, but now this is the end. Peace

6ril1 said:
It should not reboot between the bootloader flash and the kernel flash...
I have already given the method to have recovery access with hard keys a few posts earlier...
Click to expand...
Click to collapse
yup,got it sorted with your prementioned method.
Thanks!
the 20h kernel fixes the redraw issues on the home when waking the phone

6ril1 said:
Sorry, I'm very busy because I have to take care of a neighbor in agony (terminal cancer), so I answer briefly. I will keep this thread, including by completing Part question / answer as soon as available, thank you for your indulgence.
To be sure you have everything you need, you can flash the two @dorimanx package (bootloader + kernel )
http://www.dorimanx.com/LG/default-kernels/KK-20H-D802-BOOT-LOADER.zip
http://www.dorimanx.com/LG/default-kernels/ORIGINAL-KK-20H-D802-KERNEL-KK-aboot.zip
because if you want to flash original 20H kernel you must have 20h (KK) bootloader (bootstack) too (and of course bumped recovery), assuming you are on 20H stock (?)
Click to expand...
Click to collapse
In dorimanx site there is flashable kk 20h baseband. Is it the same with kk 20d baseband? Is it important to flash 20h baseband also?

Rom is perfect, but have lot of LG balast. Any chance add Aroma options for debload and instal AdAway? Thank you

Related

[ROM] SPRINT STOCK 5.02 [ZVG] [ROOTED] (Full/Light/Ultra)

SPRINT STOCK ZVG ROM (ROOTED)
LOLLIPOP 5.02​
Three Choices:
FULL ROM (Just Rooted - No Other Changes)
LIGHT ROM (Removed System Directory Google Apps Found In Playstore)
ULTRA ROM (Removed TONS Of Bloat And Apps For A Basic Fast And Slim Setup)
Requirements:
* MUST Have Been On Stock 5.02!
* Must Be Rooted!
* Must Have Run AutoREC For Lollipop!(AutoRec By @bender_007)
AutoRec LS980 Lollipop Link
Root ZVG Linkhttp://forum.xda-developers.com/sprint-g2/development/root-stock-zvg-t3094596http://forum.xda-developers.com/sprint-g2/development/root-stock-zvg-t3094596http://forum.xda-developers.com/sprint-g2/development/root-stock-zvg-t3094596http://forum.xda-developers.com/sprint-g2/development/root-stock-zvg-t3094596
*Lollipop will NOT work with the JellyBean Bootloader or Jellybean Radio.
Installation: (FOR ZVG, ROOTED & USED AUTOREC For Lollipop)
* MUST Have Been On Stock 5.02!
* Must Be Rooted!
* Must Have Run AutoREC For Lollipop!(AutoRec By @bender_007)
(1) Backup Current ROM / All Partitions (Optional)
(2) Wipe System, Data, Cache
(3) Install The ROM Of Your Choice
(4) Reboot After Completion And Enjoy!
*LG Logo Boot Screen Is Normal For 5-10 Minutes!
*Don't Forget To Log-In Account, Update Profile & Reboot!
INSTALLATION COMING FROM NON-ZVG SEE SECOND POST!
Future Plans:​As I get more time, I plan on making a custom ZVG STOCK with many optimizations such as, Hotspot, Init.d support, OOM tweaks, SDCard tweaks, Kernel tweaks, MUCH Louder Audio, Better Camera Captures, Etc. (Still Hoping for a Dorimanx ZVG Kernel Soon)
DONE: http://forum.xda-developers.com/sprint-g2/development/rom-ultrapop-t3102895
Download Links:​FULL ZVG
LIGHT ZVG
ULTRA ZVG (Re-Compressed)
ZVG MODEM (Not Needed Unless You Are On ZVD/ZVE)
ZVG KERNEL (Not Needed, Just For Having)
Please Buy Me A Coffee Or Show Appreciation:
click-> DONATE <-click​
PLEASE HIT THE THANKS BUTTON!​
COMING FROM NON-ZVG
Unfortunately The ONLY proper steps are:
(1) TOT back to ZVE
(2) Accept the OTA ZVG update or sideload the ZVG update
(3) Root ZVG
(4) Install AutoREC for Lollipop
(5) Reboot to TWRP Recovery
(6) Wipe System, Cache, Data
(7) Flash your choice of ZVG ROM you want
*Reboot and be patient for 5-10 minutes
PLEASE HIT THE THANKS BUTTON!​
** reserved 2 **
does it contains global sim unlock or I have to unlock it manually?
creepin said:
does it contains global sim unlock or I have to unlock it manually?
Click to expand...
Click to collapse
No, as of now there is no Customizations (besides root). The light and ultra versions are just stripped down. My next release will be a customized ROM with whatever customizations the community would like (as long as I am capable/have time to do them).
Agimax said:
No, as of now there is no Customizations (besides root). The light and ultra versions are just stripped down. My next release will be a customized ROM with whatever customizations the community would like (as long as I am capable/have time to do them).
Click to expand...
Click to collapse
bro I dont need any customization just want to unlock my sim on stock ZVG rom because I am unable to do it with other methods
creepin said:
bro I dont need any customization just want to unlock my sim on stock ZVG rom because I am unable to do it with other methods
Click to expand...
Click to collapse
I have NOT included a SIM Unlock at this time. If an unlock hack is available, I will include it with the CUSTOMIZED version of the ROM.
Agimax said:
I have NOT included a SIM Unlock at this time. If an unlock hack is available, I will include it with the CUSTOMIZED version of the ROM.
Click to expand...
Click to collapse
Ok thanks... Waiting!!
Dude, rocking the stock already. I like it. Or will after I grab it. The bloat is so not cool.
Even some of lg bloat kills.
Thanks
secret.animal said:
Dude, rocking the stock already. I like it. Or will after I grab it. The bloat is so not cool.
Even some of lg bloat kills.
Thanks
Click to expand...
Click to collapse
Then you will love it when I slap together the Customized/Tweaked version
Looking forward to it.
Agimax said:
Then you will love it when I slap together the Customized/Tweaked version
Click to expand...
Click to collapse
I CAN flash in ZVC ?
rubenn93 said:
I CAN flash in ZVC ?
Click to expand...
Click to collapse
No, you would need the KitKat bootloader, ZVG Modem. I haven't tested on anything except Factory ZVG (Rooted & AutoRec). It should work with ZVD/ZVE if they have KitKat Bootloader & Flash the ZVG Modem, but this has yet to be confimed by testers.
I'm thinking of making a flash for putting factory aboot, modem & laf partitions in place for those on older firmware, but it would only work with the G2s with the LGD screen (not JDI).
rubenn93 said:
I CAN flash in ZVC ?
Click to expand...
Click to collapse
You would need to update your aboot. As twrp from KitKat auto-rec put you to jelly bean boot loader.
You might be able to put lollipop auto-rec on to change your aboot to KitKat and go to recovery and flash rom and modem. But that is iffy, and may not work. But you could try.
Agimax said:
No, you would need the KitKat bootloader, ZVG Modem. I haven't tested on anything except Factory ZVG (Rooted & AutoRec). It should work with ZVD/ZVE if they have KitKat Bootloader & Flash the ZVG Modem, but this has yet to be confimed by testers.
I'm thinking of making a flash for putting factory aboot, modem & laf partitions in place for those on older firmware, but it would only work with the G2s with the LGD screen (not JDI).
Click to expand...
Click to collapse
then I have to be in ZVG and then rot and use AUTOREC ? (I've seen who have the problem of EFS is that true?
Efs, you should always have a backup somewhere. I always backup my efs when I do make one. And I have a separate efs backup on my computer.
rubenn93 said:
then I have to be in ZVG and then rot and use AUTOREC ? (I've seen who have the problem of EFS is that true?
Click to expand...
Click to collapse
I haven't seen the EFS issues, but TWRP gives you option to back-up. I always do that first thing when I get a new phone and copy it to a Laptop/PC. I've only had an issue back on the original LG G phone when I flashed a ported ROM and had to restore. Never happened yet on my G2 and I'm a flashaholic, though never flashed a ported ROM on G2 yet either.
* LOl secret.animal beat me to it!
Agimax said:
I haven't seen the EFS issues, but TWRP gives you option to back-up. I always do that first thing when I get a new phone and copy it to a Laptop/PC. I've only had an issue back on the original LG G phone when I flashed a ported ROM and had to restore. Never happened yet on my G2 and I'm a flashaholic, though never flashed a ported ROM on G2 yet either.
* LOl secret.animal beat me to it!
Click to expand...
Click to collapse
Thanks , I will recognize my sim card ? I have movistar
rubenn93 said:
Thanks , I will recognize my sim card ? I have movistar
Click to expand...
Click to collapse
You may have to wait until he puts the Sim unlock feature or they steady the zvg mod for it.
secret.animal said:
You may have to wait until he puts the Sim unlock feature or they steady the zvg mod for it.
Click to expand...
Click to collapse
ohh that bad then I can not flash . Then I have to wait to take the rom that recognizes any sim, as the rom cloudy .
wait for now . thanks !!

Bump! for LG Optimus G

Im proud to present
Bump!​for LG Optimus G​
Hi OG community. Bump for Optimus G is here.
Now OG users can use Custom Roms & Recoveries on LG locked Bootloader with ease!​
What is Bump?
Its a kind of hack for LG Stock bootloader. We can call it new unlock method!
You can flash anything that's been Bump'd, and Bump'ing a boot/recovery image is easy to do.
Two things you need to have for flashing custom roms:
1. Custom kernel- 2.Custom recovery on LG locked bootloader?
Now both are possible
Click to expand...
Click to collapse
How to Bump Recovery & Boot(kernel) images?
Unfortunately the bump site is gone. But we can use the Bump tool instead (by mronly1love).
Download it from attachments.
Put "boot.img" into bump folder and run "bumped.bat"
or
open cmd and type: bump.exe boot.img or recovery.img
or
drag *.img on bump.exe and drop it
Click to expand...
Click to collapse
Does it mean that we can flash CyanogenMod based Roms on Stock Bootloader?
Yes. I can confirm it since I've booted up with lollipop roms with no problem.
Click to expand...
Click to collapse
How about Custom Recoveries?
It works! Entered Philz touch & CWM touch on stock Bl easily.
Click to expand...
Click to collapse
How to enter Recovery on stock Bootloader while Off?
Hardreset:
Turn off the phone. Press and hold power & volume down until you see first LG logo. While holding volume down ,Release Power & press-hold it again until you see the hardreset screen.
Now press power 2 times & the phone will enter to the Recovery.
Click to expand...
Click to collapse
Won't it perform a factory/hard reset?
Yes & No:
If you have already flashed custom recovery, then there is no stock recovery to do that.
-You can enter to Philz touch & CWM this way safely.
-But not for TWRP v2.x.
Remember that TWRP will perform a factory reset(without wiping media(sdcard)) anytime you flash it!
-TWRP V3 doesn't perform factory reset anymore, but some versions of it don't work correctly, a working one built by dadi11 is here:
Bump-Folder
-Don't flash back LG Stock Recovery.
-So BACKUP YOUR ROM & PERSONAL DATA at least for first time entering to each Recovery
Click to expand...
Click to collapse
How to Bump your CustomRoms?
You need to Bump the Boot.img, which is inside the CustomRom.zip
-- Extract the boot.img. Bump it. Replace it with the old one in the Rom.zip
or
-- Extract the "boot.img". Bump it. Copy your Bumped "boot.img" to the "Bumped_boot.zip" in attachments. Flash it after flashing the Rom.
Click to expand...
Click to collapse
You can use Flashify to flash Boot/Recovery images:
https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en
Click to expand...
Click to collapse
Folder Link:
https://mega.co.nz/#F!8RZkEYIZ!me3BBaSMUBoB4ugaGSwySg
Click to expand...
Click to collapse
NOTE: Remember to keep "Fix recovery loop.zip"(by akahroba) in your phone.
Sometimes your phone continues to reboot into recovery (Mostly happens on Jellybean bootloader not Kitkat). Flashing this zip WILL fix the problem easily. Of course you can flash KDZ instead!
Click to expand...
Click to collapse
Credits & Special thanks:
Credits go to team Codefire for making Bump -thecubed
mronly1love- akahroba- dadi11​
Some flashable bumped boot images from me
1. Solid 1.95 for MIUI 7
https://mega.nz/#!e0RxGbgJ!MysXDT_G9oC7SfXFwNR2M6gxWyepEcO21-297D9vZzo
2. Solid 1.95 for stock (based) KK ROMs
https://mega.nz/#!CgwWwKSb!XVDHWZy066isn7RPb4fqf1dVNVmWLDS8fkhh9Ou6kis
3. Stock 30b + dt2w for stock (based) KK ROMs
https://mega.nz/#!blQyDIpQ!0vNwWIISnNEKoDDuJsgaPm_-Pjar1vTc6ST5tkKIz6A
Will it work for F180L? I am currently on your sling rom.. and want to update to lollipop with cynaogen 12..
This is for locked bootloaders, right? Would it work with other lg devices?
Enviado de meu LG-D625 usando Tapatalk
guidoido004 said:
This is for locked bootloaders, right? Would it work with other lg devices?
Enviado de meu LG-D625 usando Tapatalk
Click to expand...
Click to collapse
Maybe!
Successfully booted up with miui, cm, euphoria, rr, blisspop, sling kahroba, ...
Completely working for OptimusG maybe other lg devices too
Could someone here please brief about bump ??
hasan4791 said:
Could someone here please brief about bump ??
Click to expand...
Click to collapse
You mean: What is bump?
Its kind of a hack for LG Stock bootloader! We can call it new unlock method!
You can flash anything that's been Bump'd, and Bump'ing a boot/recovery image is easy to do!
Two things you need to have for flashing custom roms:
1. Custom kernel- 2.Custom recovey on LG bootloader?
Now both are possible
M.M.K said:
You mean: What is bump?
Its kind of a hack for LG Stock bootloader! We can call it new unlock method!
You can flash anything that's been Bump'd, and Bump'ing a boot/recovery image is easy to do!
Two things you need to have for flashing custom roms:
1. Custom kernel- 2.Custom recovey on LG bootloader?
Now both are possible
Click to expand...
Click to collapse
But the bootloader is unlockable, so isn't this just a pita...
jcpowell said:
But the bootloader is unlockable, so isn't this just a pita...
Click to expand...
Click to collapse
Although an unlocked bootloader is a better choice, Locked bootloader has it's own advantages for the ones who stay on stock based roms like myself...
Yest i did complete KDZ and on stock now with rooted & locked bootloader ....Is it possible for me to use bump now ?
hasan4791 said:
Yest i did complete KDZ and on stock now with rooted & locked bootloader ....Is it possible for me to use bump now ?
Click to expand...
Click to collapse
Yep. Bump your desired recovery & rom( bump it's boot) with bump tool.
I've already uploaded bumped Philz touch.
You can flash the recovery with flashify app
Flash your rom
Nothing else you need to do
Sent from my LG-E975 using Tapatalk
so it flashes a custom rom based on stock kernel? we still need to make our own builds before or use the avaiable ones, right?
guidoido004 said:
so it flashes a custom rom based on stock kernel? we still need to make our own builds before or use the avaiable ones, right?
Click to expand...
Click to collapse
That's only replacing an extracted & bumped boot file back in it's rom.zip which takes 30 secs (now your roms is signed-like G3 roms). This custom rom will bootup on both locked & unlocked bootloader.
Also no different it's stock based rom or cyanogen mod based.
The tool will only bump the boot. It does NOT change your boot.img
Sent from my LG-E975 using Tapatalk
M.M.K said:
That's only replacing an extracted & bumped boot file back in it's rom.zip which takes 30 secs (now your roms is signed-like G3 roms). This custom rom will bootup on both locked & unlocked bootloader.
Also no different it's stock based rom or cyanogen mod based.
The tool will only bump the boot. It does NOT change your boot.img
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
what about recovery? works in the same way? something like a safestrap, i mean.
guidoido004 said:
what about recovery? works in the same way? something like a safestrap, i mean.
Click to expand...
Click to collapse
I've described everything clearly in the op.
Flash a bumped cwm or Philz touch & as long as you don't flash another unbumped Recovery, you don't need to be worry. No problem if you flash another recovery.zip in recovery If you've already bumped its recovery.img.
Sent from my LG-E975 using Tapatalk
Confirmed working.
Using Sling Kahroba on locked BL.
Offline charging is working
Thanks for the tool!
Cheers,
Rae
Everytime we switch from one rom to another we have to bump the boot.img first before we flash through philz/cwm?
Once you bump the boot.img of a ROM (and added it on the ROM's zip), you can flash it on locked bootloaders. You don't have to bump it again if you want to re-flash it.
Just make sure that every ROM you will install on locked bootloaders is bumped. :good:
Cheers,
Rae
I'm currently on an unlocked boatloader with TWRP running ArtMOD V7 and solid kernel.. Can i "relock" the boatloader keeping the current configuration and start bumping ?
Sent From LG-E975
Powered By ArT MoD V7 & fuelled by Solid Kernel V1.95 ?
Recovery : TWRP 2.8.4 with MultiROM and MTP
CPU Governer : Intelliactive
CPU Clock Range : 162 to 172800
UnderVolt : 125000
GPU Clock Range : 128 to 487
I/O Scheduler : fiops
MasterFURQAN said:
I'm currently on an unlocked boatloader with TWRP running ArtMOD V7 and solid kernel.. Can i "relock" the boatloader keeping the current configuration and start bumping
Sent From LG-E975
Powered By ArT MoD V7 & fuelled by Solid Kernel V1.95
Recovery : TWRP 2.8.4 with MultiROM and MTP
CPU Governer : Intelliactive
CPU Clock Range : 162 to 172800
UnderVolt : 125000
GPU Clock Range : 128 to 487
I/O Scheduler : fiops
Click to expand...
Click to collapse
Do you really want me to provide my bootloader relocker from recovery?!
There you go! Don't flash bumped twrp. It will perform factory reset.
The zip itself does flash Philz & boot & everything
https://mega.nz/#!EBZ3iBRQ!i2ql-rQlR3vv_V4luTt-Me7xofrZaoWDbOsYxv98fJw
But consider the bootloader is from 20aOpenEU. It has been tested on 20A openeu many times. It MUST work on the other regions kdz... If anyone wanna use it, they must reply the result
Then I will provide my bootloader unlocker from recovery
Also do NOT copy

[KERNEL][5.1.1][10.7.A.0.222/228][ADVANCED STOCK WITH RECOVERY](UB Only)

Edit: New flashable zip with dt2w, latest TWRP, usb fastcharge and Multirom support here >> View attachment 3853129
Advanced Stock Kernel with TWRP 2.8.7.0 recovery
(As requested by ZL users, based on my work for Yuga, even though I don't own ZL)
boot.img can be downloaded from Here
Flash using FASTBOOT
Code:
fastboot flash boot boot.img
or FLASHTOOL
Code:
"lightning icon"/Fastboot mode/Select kernel to Flash/
To root, download Chainfires latest flashable zip from here.
Then reboot and press press volume up when blue LED turns on to enter TWRP recovery, and flash the zip from the stored location.
Note: In TWRP "mount " menu, make sure system read only box in bottom left corner is not ticked.
This is a Pure stock kernel for unlocked bootloaders made from kernel.sin extracted from stock firmware.
Unpack/Repack tools used are:-
RecoveryKitchen by @[NUT]
Android Image Kitchen by @osm0sis
TWRP 2.8.7.0 compiled by me from source
FLASHABLE ZIP
ZL222TWRP.zip
Tested and reported as working.
Enjoy :good:
Working perfectly! Many thanks.
Micro SD card does not mount
The micro sd card does not mount after changing kernel to permissive.
After removing and putting it back again it works but that's only till a reboot.
Can u put xposed in ur kernel or make a complete flashable zip with root, recovery,xposed installer etc.
I know I am asking a lot but if there is anything I can do , ill be happy to help.
Thanks in advance
fjvaz1995 said:
^^
Click to expand...
Click to collapse
I don't have sd card mounting problem when changing to permissive on my XZ (don't own ZL), so I can't help you there.
As for all in one root and exposed, you can do that with PRF creator. But you have TWRP, so it would be easier just to Flash the required zips in recovery.
Thanks, would you pls help to make zip flashable ?
khangozzy said:
Thanks, would you pls help to make zip flashable ?
Click to expand...
Click to collapse
No problem. Added to OP:good:
i had installed this one, and flashed a stock rom provided over the Flashtool (10.7).
Now my phone reboot always when finish the "optimizing apps."
Does anyone know how to fix?
Hmm, trying to go over twrp it says i have any os installed. Damn flashtool.
sorry for spamming this topic .
Hi , this kernel, work on double tap to wake?
Patybello said:
Hi , this kernel, work on double tap to wake?
Click to expand...
Click to collapse
No, use Zombie kernel
http://forum.xda-developers.com/showthread.php?p=61142688
his, is it possible to update this since now we have 10.7.A.0.228 for the ZL?
cheers mate
brenyoka said:
his, is it possible to update this since now we have 10.7.A.0.228 for the ZL?
cheers mate
Click to expand...
Click to collapse
What's the kernel version info?
(settings > about phone)
this is the kernel kernel info:
3.4.0-perf-gbccb33a
[email protected] #1
Fri Jul 10 09:23:01 2015
I am not sure if it matters but my ZL is the C6503 version (with LTE).
*** EDIT ***
Forgot to mention that I still have only 10.7.A.0.222 not 10.7.A.0.228 even if the device now says that I am on the "latest update". But through flashtool I could get the 10.7.A.0.228 rom (Northern Combined) on my computer.
Flash it and tell me if the kernel build date changes.
OK, I will. Does this work on any variants of ZL, like C6502, C6503 or C6506?
I have a problem now: I may have only the C6502 (which does not have LTE) although I specifically asked for a C6503. See my post on that here.
This will work on any ZL model as kernel is the same for all variants.
Edit: Saw you thread, looks like you have been had. Send it back and get a refund. Either it's a 6502 or your modem is malfunctioning. Either way you didn't get what you paid for. @brenyoka
@Shoey, thanks for the comment. Will contact them about the refund. So is it still possible that only a LTE modem does not work?
I unlocked the boot loader, installed your kernel, then flashed the latest, 10.7.A.0.228 rom (Nordic combined, pre-rooted, prepared with zxz0O0's PRF cretor) in recovery. All runs well.
The kernel info is still exactly the same as before:
3.4.0-perf-gbccb33a
[email protected] #1
Fri Jul 10 09:23:01 2015
How can I make the latest TWRP image file to a flashable zip? I plan to use it in PRF creator which requires that the recovery is in zip format.
brenyoka said:
@Shoey, thanks for the comment. Will contact them about the refund. So is it still possible that only a LTE modem does not work?
Click to expand...
Click to collapse
Not sure about that. Maybe malfunctioning, maybe 6502 modem. A bit OT though.
brenyoka said:
I unlocked the boot loader, installed your kernel, then flashed the latest, 10.7.A.0.228 rom (Nordic combined, pre-rooted, prepared with zxz0O0's PRF cretor) in recovery. All runs well.
The kernel info is still exactly the same as before:
3.4.0-perf-gbccb33a
[email protected] #1
Fri Jul 10 09:23:01 2015
Click to expand...
Click to collapse
Ok thanks for confirming. So kernel is the same. No need to update the thread then.
brenyoka said:
How can I make the latest TWRP image file to a flashable zip? I plan to use it in PRF creator which requires that the recovery is in zip format.
Click to expand...
Click to collapse
Must people put [NUT]'s dual recovery flashable zip in that part. Alternatively, you could try the flashable zip from the OP. That might work. Anyway that's also OT.
Thanks for the response. I knew this may be not the best thread for my question, but I saw you easily made a flashable zip for the kernel, so I just try to do the same with the recovery image. I don't need dual recovery installing a bunch of unnecessary stuff. Twrp would be sufficient. Sorry to bother you. I now asked the same question in that thread. Cheers mate.
ZL with PureX ZL v2.0
Hi,
I've recently installed PureX ZL v2.0 on my Xperia ZL C6502.
Can I still install this Kernel or it can be installed on Stock ROM only.
FYI..
My xperia is Bootloader unlocked, Rooted & TWRP v2.8.7.0 is installed.

[BOOTLOADER] Bootloader Unlocker/Locker from recovery

Hi guys
Bootloader unlockers/lockers from recovery are here.
Easy method to unlock & relock Optimus G bootloader.​
Good things about these zips:
1. No running OS is needed.
2. You don't have to be on lg stock roms.
3. Work much faster & easier. Less than a minute.
4. You will still have custom recovery after locking your bl.
How to use?
Using bumped recovery, flash them like other zips in recovery.
Don't have recovery?
Flash a bumped recovery img (inside of the attached zips) with an app like Flashify or Kernel Adiutor or etc.
Note: BL unlockers flash unlocked bootloader + Philz/CWM recovery. Booting up on unlocked BL needs unlocked kernel.
So in stock roms, don't forget to flash an unlocked kernel, like unlocked stock kernel or solid kernel or etc...
Anyway in case of any problem, there is no worry because you can always access to Philz touch(for E975) or CWM(for other variants) recovery.
I could only test E975 ones. Other variants unlockers must also work. But you are the testers...
Mirror links (files folder):
https://mega.nz/#F!4JwWCJZB!3jFrgKSdRhAhdwLadD_YaQ
Please Note:
1. I'm waiting for your feedbacks. Please give feedback with name of your variants.
2. I didn't have stock bootloader files for other variants, so I could make bootloader locker for E975 only.
Some guides:
1. How to flash boot/recovery .img in Kernel Auditor?
In the Backup section of the app, use Flash IMG button, then select your .img file (extract them from zips), then select the partition to flash (boot/recovery).
2. You can use your own bumped recovery img, using the bump tool
3. On locked bootloader you can enter to recovery with hardreset method.
4. After flashing Makoz30f Flasher (not after unlocking, unlocking is ok), it will also flash bootloader tz.img & rpm.img.
Flashing Mako rpm.img will cause false heat issue on LG roms so your screen brightness will not go further than 63%(& cpu clock speed further than 1188000). E975 unlocker & relocker zips will replace tz & rpm partitions with stock ones. So you can use them to fix this problem.
Whats mean stockboot?
Btw thanks, no instal freegee to unlock bl , nice job
christboanerges said:
Whats mean stockboot?
Btw thanks, no instal freegee to unlock bl , nice job
Click to expand...
Click to collapse
for other variants of og, after unlocking, you need to flash an unlocked kernel, but for E975, if you use the zip that has stockboot, you dont need to do anything & it flashes the kernel for you.
What's it use for ?
paul_zm said:
What's it use for ?
Click to expand...
Click to collapse
For someone who want to lock or unlock bootloader without use anyapp. Btw thanks author.
tiennhu89 said:
For someone who want to lock or unlock bootloader without use anyapp. Btw thanks author.
Click to expand...
Click to collapse
Thank you guys.
Since Gee3 rom has better speed & LTE support in our stock roms, I'm making Gee3 v1.3 & I'm testing it, but with this kind of statistics , it seems there's no motivation no replays about its working on other variants...
M.M.K said:
Thank you guys, but you may press thanks if you really like it
Since Gee3 rom has better speed & LTE support in our stock roms, I'm making Gee3 v1.3 & I'm testing it, but with this kind of statistics , there's no motivation no replays about its working on other variants...
Click to expand...
Click to collapse
waiting for this great update, and I encourage that there are still people waiting to see more of our og thank you
Google translator
MMK instruction
Hi MMK,
I'm a total newbie and it's the first time i've ever flashed a device, my E975 is completely stock (but i've root privilege and su is installed). I've installed flashify and downloaded a zip (i don't have a special kernel at the moment do you suggest stockboot). Now i've unzipped the folder on the phone but i'm uncertain about what to do now, there are a lot of images and i really don't know where to flash what. Can you suggest a more detailed procedure?
Thank you for the effort and thanks in advance.
great job bro ^_^
akula.ee said:
Hi MMK,
I'm a total newbie and it's the first time i've ever flashed a device, my E975 is completely stock (but i've root privilege and su is installed). I've installed flashify and downloaded a zip (i don't have a special kernel at the moment do you suggest stockboot). Now i've unzipped the folder on the phone but i'm uncertain about what to do now, there are a lot of images and i really don't know where to flash what. Can you suggest a more detailed procedure?
Thank you for the effort and thanks in advance.
Click to expand...
Click to collapse
Hi, If your bootloader isn't already unlocked:
In flashify you must choose recovery image from flash section, then choose the Philz.recovery.img you've extracted.
Then press reboot to recovery from options & simply flash the zips in recovery mode to lock or unlock your bootloader.
Make sure to use your own variant zip.
Hi MMK . i wang to offline charging on sling rom . how i have to do .
my device e970 . TWRP 2.8.5 .I'm using sling kahroba right now.
Chum.zuizui said:
Hi MMK . i wang to offline charging on sling rom . how i have to do .
my device e970 . TWRP 2.8.5 .I'm using sling kahroba right now.
Click to expand...
Click to collapse
If you want stock based roms like Sling Kahroba,
Before unlocking, flash a bumped recovery & install the bumped Sling Kahroba... Easy.
PS: you can't use lockers because they're only for E975 variant.
M.M.K said:
Hi guys
Bootloader unlockers/lockers from recovery are here.
Easy method to unlock & relock Optimus G bootloader.​
Good things about these zips:
1. No running OS is needed.
2. You don't have to be on lg stock roms.
3. Works much faster & easier. Less than a minute.
4. You will still have custom recovery after locking your bl.
How to use?
Using bumped recovery, flash them like other zips in recovery.
Don't have recovery?
Flash a bumped recovery img (inside attached zips) with an app like Flashify or Kernel Adiutor or etc.
Note: These zips flash bootloader + Philz/CWM recovery.
So in stock roms, don't forget to flash an unlocked kernel, like unlocked stock kernel or solid kernel or etc.
In case of any problem, there is no worry because you always access to Philz touch(for E975) or CWM(for other variants) recovery.
If you provide me other variants stock bootloader files, I can make bootloader lockers for them too.
I could only test E975 ones. Other variants unlockers must also work. But you are the testers...
Mirror links (files folder):
https://mega.nz/#F!4JwWCJZB!3jFrgKSdRhAhdwLadD_YaQ
Click to expand...
Click to collapse
Worked perfectly on my E975. Used bootloader locker+stockboot. Well done.
ppswaroopa said:
Worked perfectly on my E975. Used bootloader locker+stockboot. Well done.
Click to expand...
Click to collapse
Made for convenience
Thanks for the result.
Worked flawless in my E977 :good:
I need to unlock my bootloader. I used to do it with freegee but it doesnt work no more. Can i do it with this method? if so let me know guyz
Im on stock rom with locked bootloader BTW
HeXoR007 said:
I need to unlock my bootloader. I used to do it with freegee but it doesnt work no more. Can i do it with this method? if so let me know guyz
Im on stock rom with locked bootloader BTW
Click to expand...
Click to collapse
Check your variant & go for it...
I've described what you should do on stock rom & locked bl.
Start with Flashify & follow the procedure.
Mr.MEX bootloader unlocker also works...
New bootloader Z30F (boot-z30f.zip):
https://yadi.sk/d/GqqvKSddenX5R/MAKO BOOT MOD TESTED/LG Optimus G
Go to recovery, flash zip, enjoy!
Mr.MEX said:
New bootloader Z30F (boot-z30f.zip):
https://yadi.sk/d/GqqvKSddenX5R/MAKO BOOT MOD TESTED/LG Optimus G
Go to recovery, flash zip, enjoy!
Click to expand...
Click to collapse
whats the difference with the z30f from here? http://forum.xda-developers.com/nexus-4/general/nexus-4-bootloader-collection-t2105983

bootloader stock zip required to flash through twrp(need to go back to seslinux enfor

I flashed a modified bootloader to use magisk with oos as it forced seslinux to premissive
now i need to go back to stock bootloader
can anyone provide me zip for the stock bootloader so i can flash it throught twrp
the modified bootloader thread
https://forum.xda-developers.com/oneplus-3t/how-to/magisk-oxygen-os-8-0-op3-3t-t3689901
the mordified bootloader zip file is in the download links ->magisk 14.3 zip-> oneplus_bootloader.zip
this might also help
https://www.xda-developers.com/onep...ng-of-selinux-to-permissive-mode-in-fastboot/
file also attached mordified bootloader
indroider said:
I flashed a modified bootloader to use magisk with oos as it forced seslinux to premissive
now i need to go back to stock bootloader
can anyone provide me zip for the stock bootloader so i can flash it throught twrp
the modified bootloader thread
https://forum.xda-developers.com/oneplus-3t/how-to/magisk-oxygen-os-8-0-op3-3t-t3689901
the mordified bootloader zip file is in the download links ->magisk 14.3 zip-> oneplus_bootloader.zip
this might also help
https://www.xda-developers.com/onep...ng-of-selinux-to-permissive-mode-in-fastboot/
file also attached mordified bootloader
Click to expand...
Click to collapse
Simply dirty flash the ROM.
tnsmani said:
Simply dirty flash the ROM.
Click to expand...
Click to collapse
Its not wot m looking for.. Bootloader will not go enforced by its own . so.. Looking for bootloader stock zip
Hoping it's not too late: have you looked there?
Simone98RC said:
Hoping it's not too late: have you looked there?
Click to expand...
Click to collapse
No boot loader there
Just firmwares n boot logos
Still thanks for trying
indroider said:
No boot loader there
Just firmwares n boot logos
Still thanks for trying
Click to expand...
Click to collapse
Sure? You're wrong: the mentioned link include only bootloader+modem that are coming with every OOS release.
There's no system partition, because that packages are built for custom rom users.
I used them for a long time, until I went back to modded stock.
Ps also full firmware include bootloader+modem partitions, otherwise you would get in hard brick especially with major updates.
Are you referring to a particular partition? What you mean for firmware?
Simone98RC said:
Sure? You're wrong: the mentioned link include only bootloader+modem that are coming with every OOS release.
There's no system partition, because that packages are built for custom rom users.
I used them for a long time, until I went back to modded stock.
Ps also full firmware include bootloader+modem partitions, otherwise you would get in hard brick especially with major updates.
Are you referring to a particular partition? What you mean for firmware?
Click to expand...
Click to collapse
Yes they do include that bootloader img i have tried flashing multiple boot images but i used a bootloader zip from. A dev that changed the setting of my selinux of bootloader from enforced to permissive in order to use magisk 14.2 with oos as magisk earlier didnt support enforced state.... That is only poossible to replace when you have a bootloader zip that include instructions to do so .. So the default bootloader zip will have that instruction as default values
Did you find any solution?
theo.j22 said:
Did you find any solution?
Click to expand...
Click to collapse
Yes just flash community beta of pie n bootloader will be updated to stock settings

Categories

Resources