Develop Bugs

New Debug Rom EXT List

Greets All,
Just wanted to post the new EXT packages from the: RUU_Huashan_Dopod_CHS_0.90.706.0_0.97.332.6_Debug. (NOT a TP2 ROM!)
Mods if this is in the wrong place please move to proper location. Link provided by mobileunderground "cnzqy1".
RUU_Huashan_Dopod_CHS_0.90.706.0_0.97.332.6_Debug EXT Packages Build
=====================================
: AdobePDF_2_5_1_0_404840_06
: AdvancedNetwork_1_0_13_0
: aGPS_Confirmation_1_0_20163226_00
: Album_3_2_20171628_00
: AppointmentEditor_1_0_20163010_0
: App_Service_1_87_0_0
: Arphic_CHS_Font_1_1_20090924_00
: Audio_Booster_2_5_20164011_00
: BacklightRedirect_1_0_0_0
: BluetoothSetting_2_11_0_0
: Boot_Launcher_1_0_20143626_2
: BrowserSnapshot_1_0_20163010_0
: Calculator_1_1_20162033_0
: CalenderLauncher_1_0_0_0
: Camera_6_45_20171631_00
: ChineseSlidingBlock_1_0_10060401_Dopod_CHS_R03
: CHS_FontSetting_1_1_20091203_00
: ClearStorage_2_3_2_2
: CMBandSwitching_2_2_2_0
: CMBluetooth_1_2_2_0
: CMCallBarring_1_3_5_0
: CMCallerID_1_5_3_0
: CMCallForwarding_1_4_15_0
: CMCallWaiting_1_3_2_0
: CMCC_DM_1_0_20100602_Dopod_CHS_RC0
: CMInternetSharing_1_2_B_0
: CMMB_1_5_20163926_00
: CMPhone_1_6_I_0
: CMPhoneVMSetting_1_9_0_0
: CMPin_1_5_5_0
: CMRead_1_08_100407_Dopod_CHS_R05
: CMWifiAdvanced_1_0_5_0
: CommManager_2_10_3_0
: Concurrence_Mgr_1_5_19221227_00
: Contact_Picker_1_0_20163220_00
: Contact_Utility_Engine_1_2_20152422_00
: CreateCMCCMailAccount_1_0_20163220_02
: Customer_Service_1_0_10062501_Dopod_CHS_R03
: CyberonVoiceSpeedDial_1_2_b100303_HuaShan_01
: DataDisconnect_1_14_0_1
: DCD_1_0_10060401_Dopod_CHS_R06
: DeviceInfo_2_14_0_0
: Dopod_Base_1_0_10052501_Dopod_CHS_R02
: Dopod_MyFavorite_1_0_10060201_Dopod_CHS_R02
: DRM_Middleware_1_5_19221328_00
: Dshow_2_0_20161331_00
: Email_Setup_Wizard_2_3_20163221_20
: EngMode_Tool_1_13_0_0
: EventNotify_1_0_10060401_Dopod_CHS_R03
: Fetion_3_1_0_100702_Dopod_CHS_R06
: FM_Radio_2_5_20171525_00
: FormatSD_2_10_0_0
: Full_Screen_Player_1_8_20171624_00
: GoogleLocationService_1_0_1_22
: GroupEditor_1_0_20163833_00
: G_Sensor_Calibrator_1_1_20153824_0
: HTCAnimation_2_0_0_0
: HTCApplication_1_17_3_0
: HTCBirthday_1_2_0_0
: HTCBookmark_1_0_20163010_0
: HTCFDN_1_15_2_1
: HTCFont_Link_1_0_19213429_00
: HTCFramework_1_7_20163525_00
: HTCGeoService_1_0_20162730_00
: HTCLockScreen_2_0_20171132_00
: HTCMessage_1_11_281_0
: HTCMessaging_Client_1_8_20171628_00
: HTCScroll_2_0_20161825_00
: HTCSettings_1_4_4_0
: HTCStartUp_1_7_0_0
: HTCUtil_4_19_0_0
: IE6Enhancement_1_0_20163010_0
: IME_CHS_2_2_20171228_00
: In_Call_Recorder_1_1_20162725_01
: IPDial_1_0_10053101_Dopod_CHS_R03
: LockstreamDRM_1_2_091113_O9_01
: Long_Press_End_Key_1_5_20142530_00
: Manila_Calendar_2_6_20171823_0
: Manila_Core_2_6_20164010_0
: Manila_Home_2_6_20171727_0
: Manila_Internet_2_6_20162821_0
: Manila_Mail_2_6_20163325_0
: Manila_Message_2_6_20163810_0
: Manila_People_2_6_20162110_0
: Manila_Photo_2_6_20163130_0
: Manila_Settings_2_6_20171524_0
: Manila_Weather_2_6_20171726_0
: Media_Tool_kit_1_2_20171629_00
: Menu_Enhancement_1_1_20171128_00
: Message_Enhancement_1_2_20163924_00
: mHub_VO_1_8_100513_0
: MobileNavigation_6_0_7_2010060401Dopod_CHS_R2
: MP3_Trimmer_1_2_20162510_0
: MusicWalkman_3_0_20100612_Dopod_CHS_R001
: Mute_1_1_2_0
: MyCPL_3_13_0_6
: M_Market_1_1_0_000_2507_Dopod_CHS_R04
: New_Contact_Card_1_1_20163010_0
: Notification_Enhancement_3_5_20163228_00
: NTF_Alarm_Module_1_0_20161822_00
: OMADM_LIB_1_0_20152129_1
: OmniBizCard_1_4_9_20100622_Dopod_CHS_R02
: OOBE_1_0_20163128_01
: Opera_Browser_9_70_36009_0
: PhoneSetting_1_72_0_0
: Phone_Canvas_Enhancement_5_0_61220163232_0
: PKG_1_1_0_0
Manila and many Pkgs updated, SYS Build 23121
Time to Play Anyone that needs the pvr files in the packages ripped let me know. Very easy to rip the icons out into individual files.

[Q] LG Optimus Me P350 completely unresponsive

Okay, I am a complete NOOB. I jumped into the deep end of the pool and now I am asking for help. I had a Cyanogen Mod 7 on my phone and I wanted to flash original firmware onto the phone. I followed these steps:
1.Install LG Optimus Me Drivers on your PC.
After installing the drivers go to Device manager ( for windows users only )
Disable all LG virtual modem drivers.
2.Download official lg optimus me firmware:
3.Download Kdz updater:
Install MSXML 4.0 SP3 Parser (msxml.msi)
Run KDZ_FW_UPD.exe
4. Put your phone to emergency mode to do so remove battery and put it back in to the phone ,
then hold Volume up and Volume down buttons and power button ( at the same time ).
5. Your phone screen will show yellow background , thats good something like this..
6.Plug your phone with Usb cable to your PC
7.In KDZ_FW_UPD.tool,
choose settings : Type: 3GQCT(Smart Phone) Mode: EMERGENCY MODE
8.Browse your firmware(.kdz file) that you downloaded
9. Finaly click "Launch Software Update" .
10. Wait for process to finish , after that unplug your phone and power it upTa Da..
Everything seemed to be going well, but then KDZ gave me a FAIL notice.
Here is the log text:
[15:25:15:953] : Log is started on 21.08.2013, at 15:25:15:953,
executable: C:\Users\Manderin\Documents\LG Optimus P350_Temp\LGP350 Original FW\KDZ_FW_UPD_EN\KDZ_FW_UPD.exe (ProcID: 0x00002114),
compile time : Sep 13 2010 11:34:51
[15:25:15:953] : Version :
[15:25:15:953] : Get Usb Port
[15:25:15:969] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM4)
[15:25:15:969] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[15:25:15:969] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM4
[15:25:15:969] : Port = COM4
[15:25:15:984] : UNKNOWN : Req(12) -> Rsp(13)
[15:25:16:000] : UNKNOWN : Req(12) -> Rsp(13)
[15:25:16:016] : UNKNOWN : Req(12) -> Rsp(13)
[15:25:16:016] : >> DIAG_STATUS_F FAILED
[15:25:16:031] : >>Get Model Name [DIAG_VERNO_F]
[15:25:16:047] : BAD CONN MODE : Req(0) -> Rsp(3)
[15:25:16:062] : BAD CONN MODE : Req(0) -> Rsp(3)
[15:25:16:078] : BAD CONN MODE : Req(0) -> Rsp(3)
[15:25:16:094] : BAD CONN MODE : Req(0) -> Rsp(3)
[15:25:16:109] : BAD CONN MODE : Req(0) -> Rsp(3)
[15:25:16:125] : BAD CONN MODE : Req(0) -> Rsp(3)
[15:25:16:125] : FAIL (No Phone)
[15:25:16:125] : GetModelName() Operation Failed Check Diag CMD
[15:25:16:125] : EMERGENCY Booting Mode
[15:25:16:125] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[15:25:16:140] : BS/P350/7Danderin\AppData\Local\Temp\DZ
[15:25:16:140] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P350
[15:25:16:156] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[15:25:16:156] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[15:25:16:172] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[15:25:16:172] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[15:25:16:187] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[15:25:16:187] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[15:25:16:187] : NV Write Fail : NV ITEM 9028(9028)
[15:25:16:296] : >> GET DLOAD COMM MODE
[15:25:16:312] : [GetCommMode] Communication mode : 2
[15:25:16:312] : Pre Nand Download
[15:25:16:312] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[15:25:16:312] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[15:25:16:328] : [COM4] >>NandFlashInitWithFile(PARTITION TBL)
[15:25:16:328] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[15:25:23:519] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[15:25:23:519] : [COM14] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[15:25:23:519] : [COM4] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[15:25:23:535] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[15:25:23:550] : [COM14] >>Dl_AsyncWrite()
[15:25:23:550] : >> AMSS FLASHING ...
[15:25:23:550] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[15:25:23:550] : Sending Pkt Seq : 0
[15:25:23:550] : Sending Pkt Seq : 1
[15:25:23:550] : Sending Pkt Seq : 2
[15:25:23:550] : Sending Pkt Seq : 3
[15:25:23:550] : Sending Pkt Seq : 4
[15:25:23:550] : Sending Pkt Seq : 5
[15:25:23:550] : Sending Pkt Seq : 6
[15:25:23:550] : Sending Pkt Seq : 7
[15:25:23:550] : Sending Pkt Seq : 8
[15:25:23:550] : Sending Pkt Seq : 9
[15:25:26:577] : RX Timeout : 3.0 seconds
[15:25:26:577] : RX TIMEOUT
[15:25:26:592] : Dl_AsyncWrite - Packet is lost! : Sent packet(9), Lost packet(10)
[15:25:26:592] : if(bPktLost == TRUE)
[15:25:27:606] : Sending Pkt Seq : 10
[15:25:27:606] : Sending Pkt Seq : 11
[15:25:27:606] : Sending Pkt Seq : 12
[15:25:27:606] : Sending Pkt Seq : 13
[15:25:27:606] : Sending Pkt Seq : 14
[15:25:27:606] : Sending Pkt Seq : 15
[15:25:27:606] : Sending Pkt Seq : 16
[15:25:27:606] : Sending Pkt Seq : 17
[15:25:27:606] : Sending Pkt Seq : 18
[15:25:27:606] : Sending Pkt Seq : 19
[15:25:30:633] : RX Timeout : 3.0 seconds
[15:25:30:633] : RX TIMEOUT
[15:25:30:648] : Dl_AsyncWrite - Packet is lost! : Sent packet(19), Lost packet(20)
[15:25:30:648] : if(bPktLost == TRUE)
[15:25:31:662] : Sending Pkt Seq : 20
[15:25:31:662] : Sending Pkt Seq : 21
[15:25:31:662] : Sending Pkt Seq : 22
[15:25:31:662] : Sending Pkt Seq : 23
[15:25:31:662] : Sending Pkt Seq : 24
[15:25:31:662] : Sending Pkt Seq : 25
[15:25:31:662] : Sending Pkt Seq : 26
[15:25:31:662] : Sending Pkt Seq : 27
[15:25:31:662] : Sending Pkt Seq : 28
[15:25:31:662] : Sending Pkt Seq : 29
[15:25:31:678] : Dl_AsyncWrite - ErrNo(45), Addr(0x00009800), NandErrNo(0x19)
[15:25:31:678] : [COM14] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[15:25:31:678] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[15:25:31:678] : Close Port<<
[15:25:31:678] : TYPE_WPARAM_UPGRADE_ERROR
[15:25:31:678] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 4008
[15:25:31:725] : Log finished
Now my phone is completely unresponsive. I cannot power it up, I cannot get into Emergency Mode and I cannot get into Fastboot. Nothing is working.
Can anyone give me directions on how I can revive my phone. Thank you in advance.

Now my phone is completely unresponsive. I cannot power it up, I cannot get into Emergency Mode and I cannot get into Fastboot. Nothing is working.
Can anyone give me directions on how I can revive my phone. Thank you in advance.[/QUOTE]
Buy a new the same hapened with me 1 year ago, but warranty fix it for free... his mobo was died!

saley7 said:
Now my phone is completely unresponsive. I cannot power it up, I cannot get into Emergency Mode and I cannot get into Fastboot. Nothing is working.
Can anyone give me directions on how I can revive my phone. Thank you in advance.
Click to expand...
Click to collapse
Buy a new the same hapened with me 1 year ago, but warranty fix it for free... his mobo was died![/QUOTE]
Thank you for your response. So do you think it is completely dead? I am in China and it was bought by a friend off a Chinese website about 1 3/4 years ago. Are there no other options? Thank you in advance.

Thank you for your response. So do you think it is completely dead? I am in China and it was bought by a friend off a Chinese website about 1 3/4 years ago. Are there no other options? Thank you in advance.[/QUOTE]
when you plug the charge the screen open? if not... i'm sorry is died

saley7 said:
Thank you for your response. So do you think it is completely dead? I am in China and it was bought by a friend off a Chinese website about 1 3/4 years ago. Are there no other options? Thank you in advance.
Click to expand...
Click to collapse
when you plug the charge the screen open? if not... i'm sorry is died[/QUOTE]
I just tried again. I plugged in the charger and the charge screen did not come on. I am guessing that I hard bricked the phone. Thank you for replying to my post.

Your phone are bricking.remove the baterry first and after that connect your phone to computer using USB cable..led softkey should be lightening..i tried it before and its work..
Sent from my XT530 using xda premium

LG SOL stuck in Emergency Mode

Hello!
I have installed Cyanogenmod 9 on my LG Optimus Sol E730. In this moment, my phone won’t start. When I press the power button, the display shows „Emergency Mode!”. Before "Emergency Mode" screen appeared (when Cyanogenmod worked fine), I have tried to go into Recovery Mode, but I was getting the blue screen and the phone restarted. In this momment the phone doesn’t allow me to go into Recovery Mode. I have tried to reinstall the original firmware with KDZ Firmware Update, but I get an error and the program closes.
KDZ log -
22:41:32 : Launching SW update
22:41:32 : Unpacking KDZ
22:41:43 : KDZ file extraced
22:41:56 : Files were extracted.
22:41:56 : LGMobileDL Load.
22:41:56 : Port = -1
22:41:56 : Connecting to phone
22:42:06 : Check Phone mode = 1
22:42:23 : Phone type check.......
22:42:28 : LGMobileDL.DLL Loading....
22:42:28 : _SetAuthMark Fail
22:42:28 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
22:42:28 : _SetAuthMark Fail
22:42:28 : LoadCDMAPhoneData() Error
22:42:28 : _DetachDLL Call
22:42:28 : _DetachDLL Call End
22:42:28 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGE730AT-00-V10j-VDF-XXX-JAN-15-2013+0-DZ.dz
22:42:28 : Param : moduleDir =
22:42:28 : Param : waitTime = 0
22:42:28 : Param : UsbHighSpeed = 1
22:42:28 : Param : PhoneMode = 1
22:42:28 : Param : BinVersion = V10J_00
22:42:28 : Param : AuthMark = 0
22:42:28 : Call fn_StartUpgrade
22:42:28 : Smart : wParam = 206, lParam = 0
How can I reinstall the software on this phone?
Can I use other software like KDZ?
Please help me with a tutorial or some information.
I mention that I have installed Windows 8 x64 on my pc.
Thank you, guys!

[Q] LG Optimus LTE2 stuck at download moad

guys im having this error on kdz update i have tried disabling the modem and several different KDZ but results are the same
[R&D Test Tools Log File]
20:15:35 : Launching SW update
20:15:35 : Unpacking KDZ
20:15:41 : KDZ file extraced
20:16:33 : Files were extracted.
20:16:33 : LGMobileDL Load.
20:16:33 : Port = -1
20:16:33 : Connecting to phone
20:16:48 : Check Phone mode = 2
20:16:48 : Phone type check.......
20:16:49 : LGMobileDL.DLL Loading....
20:16:49 : _SetAuthMark Fail
20:16:49 : _SetAuthMark Ok : wAuthMark(65535)
20:16:49 : _DetachDLL Call
20:16:49 : _DetachDLL Call End
20:16:49 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\Rovi.wdb
20:16:49 : Param : moduleDir =
20:16:49 : Param : waitTime = 0
20:16:49 : Param : UsbHighSpeed = 1
20:16:49 : Param : PhoneMode = 2
20:16:49 : Param : BinVersion = V20C_KT_ROOT
20:16:49 : Param : AuthMark = 65535
20:16:49 : Call fn_StartUpgrade
20:16:49 : 3GQCT : wParam = 2007, lParam = 0
20:16:49 : 3GQCT : wParam = 13, lParam = 8
20:16:49 : Step Complete : DSP Write
20:16:49 : 3GQCT : wParam = 2008, lParam = 5
20:16:50 : 3GQCT : wParam = 13, lParam = 10
20:16:50 : Step Complete : DSP Write
20:16:52 : 3GQCT : wParam = 20, lParam = 0
20:16:52 : 3GQCT : wParam = 100, lParam = 5000
20:16:52 : Step : Upgrade Error error code = 5000
20:16:52 : ResetStartInfo() Call
20:16:52 : _DetachDLL Call
20:16:52 : _DetachDLL Call End
20:16:52 : FreeLibrary Call
20:16:52 : FreeLibrary Call End
20:16:52 : ResetStartInfo() Call End
20:16:54 : ===FINISHED===
at IParam disconnection of device sounds are heard mutiple time until it hits the error. please help

helpp
need help anyone?

LG Mobile Support Tool Stuck

Hi,
Phone Model: F460S
Software Version: Lollipop
Rom : CloudyCat6 2.0
I was looking for a solution for my problem.
My phone is stuck in lg logo. I use LG Flash tool 2014 trying to return at v20c but stuck at 2% or 4%
Log :
22:40:14 : Start Date : 2015-07-06 22:40:14
22:40:14 : ---------- CSE mode ---------
22:40:14 : ***** Check Tool Version *****
22:40:14 : Tool version :
22:40:14 : UpgradeDLL version :
22:40:14 : Current Dir : C:\Users\Adrian\Desktop\LG Flash Tool 2014
22:40:14 : LGE USB Driver Version :
22:40:14 : Android PDLV Version :
22:40:14 : Android NDLV Version :
22:40:14 : ******************************************
22:40:14 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
22:40:15 : *****CheckOS Start********
22:40:15 : Microsoft_Windows7_Professional_Service Pack 1
22:40:15 : *****CheckPCSyncPrograms Start*****
22:40:15 : PCSyncPrograms Not Found - OK and ready to upgrade
22:40:15 : SetEmerModeAT()
22:40:16 : Verifying phone connection...
22:40:16 : dwWaitResetTime(40000 ms)
22:40:17 : _IsConnectedPhone Call
22:40:27 : _IsConnectedPhone(2)
22:40:27 : 0 - NotConnected.
22:40:27 : 1 - Normal connect success
22:40:27 : 2 - Emergency connect success
22:40:27 : Phone Mode(2)
22:40:27 : *****GetPhoneType Start*****
22:40:27 : Phone Type : CDMA
22:40:28 : *****Get ESN / IMEI / MEID Start*****
22:40:29 : Skip Backup and Restore - CSE mode.
22:40:29 : Skip Sequential upgrade info check - CSE mode.
22:40:29 : *****CheckPCSyncPrograms Start*****
22:40:30 : PCSyncPrograms Not Found - OK and ready to upgrade
22:40:31 : ****************CheckAndDownload********************
22:40:31 : Version : F460S20C_00
22:40:31 : !!*****OpenURL Start*****!!
22:40:31 : ******Extract Start C:\Users\Adrian\Downloads\F460S20C_00.kdz*****
22:40:31 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
22:40:31 : Check 2G-4G big size kdz file..
22:40:31 : Extract 2G-4G big size kdz file..
22:40:31 : NNNNN WDB FullPath(C:\Users\Adrian\Downloads\F460S20C_00.kdz)
22:40:31 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
22:40:31 : Extract End C:\Users\Adrian\Downloads\F460S20C_00.kdz
22:40:31 : 01 Skip delete kdz 1.1 file...
22:40:31 : ------------------Model.dll Information-------------------
22:40:31 : Filename : LGUP_8974.dll
22:40:31 : Version : 0.3.17.0
22:40:31 : File size : 1568256
22:40:31 : File date : 2015/07/06-22:40:31
22:40:31 : PC Created date: 2015/07/06-22:40:31
22:40:31 : ----------------------------------------------------------
22:40:31 : *****Check LGCM Programs Start*****
22:40:31 : LGCM Programs Not Found - OK and ready to upgrade
22:40:31 : m_pLGCyonUpdate status change.
22:40:32 : *****WorkModelDLL Start*****
22:40:36 : strPhoneBinaryPath(C:\Users\Adrian\Downloads\F460S20C_00.kdz)
22:40:36 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
22:40:36 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
22:40:36 : _DetachDLL Call
22:40:41 : _DetachDLL Call End
22:40:41 : Call fn_StartUpgrade
22:40:41 : Phone mode change -> CSE
22:40:41 : ********* CDMA Model.dll input Parameter *************
22:40:41 : MODEL_EVENT : 32769
22:40:41 : PhoneBinaryPath : C:\Users\Adrian\Downloads\F460S20C_00.kdz
22:40:41 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
22:40:41 : BootWaitTime : 49500
22:40:41 : UsbHighSpeed : FALSE
22:40:41 : PhoneMode : 4
22:40:41 : NewPhoneBinVersion : F460S20C_00
22:40:41 : ClearSI : FALSE
22:40:41 : AuthMark : 0
22:40:41 : ********* CDMA Model.dll input Parameter End*************
22:40:45 : wParam : 20, lParam = 540
22:40:45 : MODEL DLL Event : (20, 540)
22:40:46 : Model File Count = 540
22:40:46 : wParam : 100, lParam = 51
22:40:46 : MODEL DLL Event : (100, 51)
22:40:46 : Step : TYPE_WPARAM_UPGRADE_ERROR
22:40:46 : CleanModelDll() : Free Model.dll
22:40:46 : _DetachDLL Call
22:40:51 : _DetachDLL Call End
22:40:56 : Page_Error ºÎºÐÀÔ´Ï´Ù
22:40:56 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
22:41:03 : Call Retry Thread
22:41:03 : Verifying phone connection...
22:41:03 : Verifying phone connection...
22:41:03 : dwWaitResetTime(40000 ms)
22:41:07 : _IsConnectedPhone Call
22:42:00 : _IsConnectedPhone(2)
22:42:00 : 0 - NotConnected.
22:42:00 : 1 - Normal connect success
22:42:00 : 2 - Emergency connect success
22:42:00 : Phone Mode(2)
22:42:00 : *****WorkModelDLL Start*****
22:42:02 : _DetachDLL Call
22:42:07 : _DetachDLL Call End
22:42:07 : strPhoneBinaryPath(C:\Users\Adrian\Downloads\F460S20C_00.kdz)
22:42:07 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
22:42:07 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
22:42:07 : _DetachDLL Call
22:42:12 : _DetachDLL Call End
22:42:12 : Call fn_StartUpgrade
22:42:12 : Phone mode change -> CSE
22:42:12 : ********* CDMA Model.dll input Parameter *************
22:42:12 : MODEL_EVENT : 32769
22:42:12 : PhoneBinaryPath : C:\Users\Adrian\Downloads\F460S20C_00.kdz
22:42:12 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
22:42:12 : BootWaitTime : 74250
22:42:12 : UsbHighSpeed : FALSE
22:42:12 : PhoneMode : 4
22:42:12 : NewPhoneBinVersion : F460S20C_00
22:42:12 : ClearSI : FALSE
22:42:12 : AuthMark : 0
22:42:12 : ********* CDMA Model.dll input Parameter End*************
22:42:15 : wParam : 20, lParam = 540
22:42:15 : MODEL DLL Event : (20, 540)
22:42:16 : Model File Count = 540
22:42:16 : wParam : 100, lParam = 51
22:42:16 : MODEL DLL Event : (100, 51)
22:42:16 : Step : TYPE_WPARAM_UPGRADE_ERROR
22:42:16 : CleanModelDll() : Free Model.dll
22:42:16 : _DetachDLL Call
22:42:21 : _DetachDLL Call End
22:42:25 : Page_Error ºÎºÐÀÔ´Ï´Ù
22:42:25 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
22:45:34 : Call Retry Thread
22:45:34 : Verifying phone connection...
22:45:34 : Verifying phone connection...
22:45:34 : dwWaitResetTime(40000 ms)
22:45:38 : _IsConnectedPhone Call
22:45:38 : _IsConnectedPhone(0)
22:45:38 : 0 - NotConnected.
22:45:38 : 1 - Normal connect success
22:45:38 : 2 - Emergency connect success
22:45:42 : _IsConnectedPhone Call
22:45:42 : _IsConnectedPhone(0)
22:45:42 : 0 - NotConnected.
22:45:42 : 1 - Normal connect success
22:45:42 : 2 - Emergency connect success
22:45:46 : _IsConnectedPhone Call
22:45:46 : _IsConnectedPhone(0)
22:45:46 : 0 - NotConnected.
22:45:46 : 1 - Normal connect success
22:45:46 : 2 - Emergency connect success
22:45:46 : The USB cable is not connected with the phone.
Connect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
22:45:50 : Check Cancel button active..
22:45:50 : CLGMobileHttp Class ¼Ò¸ê½ÃÀÛ.
22:45:50 : CLGMobileHttp Class ¼Ò¸ê...
22:45:50 : Page_Error ºÎºÐÀÔ´Ï´Ù
22:45:50 : LG Mobile Phone S/W Upgrade is canceled.
To finish the LG Mobile Phone S/W Upgrade, press the 'Finish' button below.
22:45:51 : =======Cancel button click : m_nStep(8)
22:45:51 : ´Ù¿î·Îµå Áß¿¡ ÄÉÀÌºí »« ´ÙÀ½ ó¸®..
22:45:51 : Page_DeepError()- 8
22:45:51 : Problem with communication between cell phone and PC
To restart from the beginning, disconnect and connect the USB cable and battery,
then power on your cell phone and try with [Options]-[Upgrade Recovery] in tool menu.
This will normally complete update.
22:45:51 : *********** End of Page_DeepError() *********
22:45:53 : =======Cancel button click : m_nStep(10)
22:45:59 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
22:45:59 : RemoveDirectory1 Error(32):C:\ProgramData\LGMOBILEAX\Phone
22:45:59 : _DetachDLL Call
22:46:04 : _DetachDLL Call End
22:46:04 : FreeLibrary Call
22:46:04 : FreeLibrary Call End
22:46:04 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
22:46:04 : RemoveDirectory1 Error(32):C:\ProgramData\LGMOBILEAX\Phone
Sorry for my english.

how did u fixed it ???
howd u fixed that problem ??