so i finally got the phone the turn on 3 months later and 12 guides, let it be for a week and it turned on... i went to root the phone using super one click, seemed to all go fine right untill it wanted to reboot, now ive worked on allot of phones, generally, the screen dosent just light up without an issue, ive run diagnostics and everything this is the same screen i get when im trying to run a new KDZ via a guide or try to run into recovery mode, im not sure what i can do to fix the phone, if anyone is able to help that would be greatly apreciated
Were you able to successfully complete any of the unbricking guides? Does the LG Software Update tool recognize the phone?
audit13 said:
Were you able to successfully complete any of the unbricking guides? Does the LG Software Update tool recognize the phone?
Click to expand...
Click to collapse
its been hit and miss, im not sure if there working cuz i will get to the the logo screen and than it just goes black but still uses power and is able to transfer files, i fonally got it turned on this morning, its a p930 but the model number when i look in about phone is a sul640 i beleive some something crazy like that, i know its a simmilar model phone, but is this why im having so many issues with the device is because its not allowing me to flash the right software?
In order to unbrick and install a custom recovery, you need to install the Korean ROM. Did complete the guide? If not, how far did you get?
audit13 said:
In order to unbrick and install a custom recovery, you need to install the Korean ROM. Did complete the guide? If not, how far did you get?
Click to expand...
Click to collapse
It improve apparently according to what the guide tells me but I'm still having the same issue of the phone screen going blank immidietyly after the Lte boot logo
It was working than I tried rooting using super one click and now I'm on the black screen again but this time I do have the stock recovery menu which is odd as I didn't know it had one until the others when .I finally got to it I'm not sure were I arsed this all up I've followed all the guides letter by letter and it's done this since day one
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
I recommend following the guide rather than using one click. Following the guide will alow you to unlock the bootloader, load a custom recovery, and root.
Could you link that please? I'll give it a try and see if it helps
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
kagalous said:
Could you link that please? I'll give it a try and see if it helps
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=1597488
audit13 said:
Try this: http://forum.xda-developers.com/showthread.php?t=1597488
Click to expand...
Click to collapse
09:28:59 : [C:\LGMobileUpgrade] Try to delete folder
09:28:59 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
09:28:59 : Start Date : 2013-08-27 09:28:59
09:28:59 : ---------- QM CSE Testmode ---------
09:28:59 : ---------- CSE mode ---------
09:28:59 : ***** Check Tool Version *****
09:28:59 : Tool version : 1.5.4.8
09:28:59 : UpgradeDLL version : 1.2.6.7
09:28:59 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
09:28:59 : LGE USB Driver Version :
09:28:59 : Android PDLV Version :
09:28:59 : Android NDLV Version :
09:28:59 : ******************************************
09:28:59 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
09:28:59 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
09:28:59 : SetEmerModeAT()
09:28:59 : *****CheckOS Start********
09:28:59 : Microsoft_Windows7_Professional_
09:28:59 : *****CheckPCSyncPrograms Start*****
09:29:00 : PCSyncPrograms Not Found - OK and ready to upgrade
09:29:00 : Checking the connection with the cell phone...
09:29:00 : dwWaitResetTime(40000 ms)
09:29:01 : _IsConnectedPhone Call
09:29:09 : _IsConnectedPhone(2)
09:29:09 : 0 - NotConnected.
09:29:09 : 1 - Normal connect success
09:29:09 : 2 - Emergency connect success
09:29:09 : Phone Mode(2)
09:29:09 : *****CheckPCSyncPrograms Start*****
09:29:10 : PCSyncPrograms Not Found - OK and ready to upgrade
09:29:11 : ****************CheckAndDownload********************
09:29:11 : ******Extract Start C:\Users\Jeanette\Downloads\LG-SU640-V10F_00.kdz*****
09:29:11 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
09:29:11 : File Size = 474536279
09:29:58 : Extract kdz file Success.
09:30:07 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10f_00.wdb\n
09:30:07 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10f_00.wdb)
09:30:17 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\SU640_WD_1_1_3_0.dll\n
09:30:17 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\SU640_WD_1_1_3_0.dll)
09:30:17 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10f_00.wdh\n
09:30:18 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10f_00.wdb)
09:30:18 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\SU640_WD_1_1_3_0.dll)
09:30:18 : Extract End C:\Users\Jeanette\Downloads\LG-SU640-V10F_00.cab
09:30:19 : ------------------Model.dll Information-------------------
09:30:19 : Filename : SU640_WD_1_1_3_0.dll
09:30:19 : Version : 1.1.3.0
09:30:19 : File size : 348160
09:30:19 : File date : 2011/10/27-17:09:48
09:30:19 : PC Created date: 2013/08/27-09:30:07
09:30:19 : ----------------------------------------------------------
09:30:19 : *****Check LGCM Programs Start*****
09:30:19 : LGCM Programs Not Found - OK and ready to upgrade
09:30:19 : *****WorkModelDLL Start*****
09:30:25 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V10f_00.wdb)
09:30:25 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
09:30:25 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\SU640_WD_1_1_3_0.dll)
09:30:25 : _DetachDLL Call
09:30:25 : _DetachDLL Call End
09:30:25 : Call fn_StartUpgrade
09:30:25 : Phone mode change -> CSE
09:30:25 : ********* CDMA Model.dll input Parameter *************
09:30:26 : MODEL_EVENT : 32769
09:30:26 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V10f_00.wdb
09:30:26 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
09:30:26 : BootWaitTime : 49500
09:30:26 : UsbHighSpeed : FALSE
09:30:26 : PhoneMode : 4
09:30:26 : NewPhoneBinVersion : LG-SU640-V10F_00
09:30:26 : ClearSI : FALSE
09:30:26 : AuthMark : 0
09:30:26 : ********* CDMA Model.dll input Parameter End*************
09:30:46 : wParam : 2004, lParam = 90
09:30:46 : MODEL DLL Event : (2004, 90)
09:30:46 : Step : TYPE_WPARAM_IFX_DN_POS
09:31:11 : wParam : 2004, lParam = 91
09:31:36 : wParam : 2004, lParam = 92
09:32:01 : wParam : 2004, lParam = 93
09:33:01 : wParam : 2004, lParam = 94
09:33:26 : wParam : 2004, lParam = 95
09:33:51 : wParam : 2004, lParam = 96
09:34:59 : wParam : 2004, lParam = 97
09:35:09 : wParam : 2004, lParam = 98
09:35:19 : wParam : 2004, lParam = 99
09:35:29 : wParam : 2004, lParam = 100
09:35:39 : wParam : 2001, lParam = 0
09:35:39 : MODEL DLL Event : (2001, 0)
09:35:40 : CLGMobileHttp Class ¼Ò¸ê½ÃÀÛ.
09:35:40 : CLGMobileHttp Class ¼Ò¸ê...
09:35:40 : CleanModelDll() : Free Model.dll
09:35:40 : _DetachDLL Call
09:35:40 : _DetachDLL Call End
09:35:40 : Step : S/W Upgrade Complete!
09:35:41 : ==========================================================
09:35:41 : Upgrade total : 402
09:35:41 : Model.dll upgrade sec : 316
09:35:41 : Model.dll name : SU640_WD_1_1_3_0.dll
09:35:41 : Model.dll version : 1.1.3.0
09:35:41 : Model.dll size : 348160
09:35:41 : Model.dll Date : 20111027170948
09:35:41 : =========================================================
got to there, now phone wont turn on again..... goes to lg screen than goes black or the colors run horridly
any suggestions man?
http://forum.xda-developers.com/showthread.php?t=1784709
Try this guide. This worked for me.
still having the same results, ive tried all 3 guides on this forum man, would it work if i tried an actual kdz for my phone not the su640 that all the guides give me? i have the p930
got it working... heres what i did, might wanna keep this post around for people having my unique issue
undid everything i tried on my pc, so remove drivers, the " 127.0.0.1 csmg.lgmobile.com " in the hosts file and uninstalled everything.
downloaded LG SU-640 firmware V10F_00.kdz: http://www.megaupload.com/?d=31XABWWJ
got KDZ_FW_UPD and windows enabler in XP SP3 Compatability mode with Administrator mode (seriously do this or no results)
Ran the Uptest EX (might need the B2CAppSetup)
Let it do its thing, Boots fine now, gonna try a root and let you know how it goes
learn it, Be careful the best
Root is working great still can't figure out the bootloader unlock without starting back where I started lol
Sent from my LG-P930 using xda app-developers app
kagalous said:
Root is working great still can't figure out the bootloader unlock without starting back where I started lol
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
I think you need to downgrade to GB to unlock.
Lol I don't know why but it won't turn on again
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Try this: remove the battery for a few minutes, re-install, and try to boot.
Left it out all night same thing
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Is it possible there is a hardware problem with the phone?
Hello!
I have installed Cyanogenmod 9 on my LG Optimus Sol E730. In this moment, my phone won’t start. When I press the power button, the display shows „Emergency Mode!”. Before "Emergency Mode" screen appeared (when Cyanogenmod worked fine), I have tried to go into Recovery Mode, but I was getting the blue screen and the phone restarted. In this momment the phone doesn’t allow me to go into Recovery Mode. I have tried to reinstall the original firmware with KDZ Firmware Update, but I get an error and the program closes.
KDZ log -
22:41:32 : Launching SW update
22:41:32 : Unpacking KDZ
22:41:43 : KDZ file extraced
22:41:56 : Files were extracted.
22:41:56 : LGMobileDL Load.
22:41:56 : Port = -1
22:41:56 : Connecting to phone
22:42:06 : Check Phone mode = 1
22:42:23 : Phone type check.......
22:42:28 : LGMobileDL.DLL Loading....
22:42:28 : _SetAuthMark Fail
22:42:28 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
22:42:28 : _SetAuthMark Fail
22:42:28 : LoadCDMAPhoneData() Error
22:42:28 : _DetachDLL Call
22:42:28 : _DetachDLL Call End
22:42:28 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGE730AT-00-V10j-VDF-XXX-JAN-15-2013+0-DZ.dz
22:42:28 : Param : moduleDir =
22:42:28 : Param : waitTime = 0
22:42:28 : Param : UsbHighSpeed = 1
22:42:28 : Param : PhoneMode = 1
22:42:28 : Param : BinVersion = V10J_00
22:42:28 : Param : AuthMark = 0
22:42:28 : Call fn_StartUpgrade
22:42:28 : Smart : wParam = 206, lParam = 0
How can I reinstall the software on this phone?
Can I use other software like KDZ?
Please help me with a tutorial or some information.
I mention that I have installed Windows 8 x64 on my pc.
Thank you, guys!
guys im having this error on kdz update i have tried disabling the modem and several different KDZ but results are the same
[R&D Test Tools Log File]
20:15:35 : Launching SW update
20:15:35 : Unpacking KDZ
20:15:41 : KDZ file extraced
20:16:33 : Files were extracted.
20:16:33 : LGMobileDL Load.
20:16:33 : Port = -1
20:16:33 : Connecting to phone
20:16:48 : Check Phone mode = 2
20:16:48 : Phone type check.......
20:16:49 : LGMobileDL.DLL Loading....
20:16:49 : _SetAuthMark Fail
20:16:49 : _SetAuthMark Ok : wAuthMark(65535)
20:16:49 : _DetachDLL Call
20:16:49 : _DetachDLL Call End
20:16:49 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\Rovi.wdb
20:16:49 : Param : moduleDir =
20:16:49 : Param : waitTime = 0
20:16:49 : Param : UsbHighSpeed = 1
20:16:49 : Param : PhoneMode = 2
20:16:49 : Param : BinVersion = V20C_KT_ROOT
20:16:49 : Param : AuthMark = 65535
20:16:49 : Call fn_StartUpgrade
20:16:49 : 3GQCT : wParam = 2007, lParam = 0
20:16:49 : 3GQCT : wParam = 13, lParam = 8
20:16:49 : Step Complete : DSP Write
20:16:49 : 3GQCT : wParam = 2008, lParam = 5
20:16:50 : 3GQCT : wParam = 13, lParam = 10
20:16:50 : Step Complete : DSP Write
20:16:52 : 3GQCT : wParam = 20, lParam = 0
20:16:52 : 3GQCT : wParam = 100, lParam = 5000
20:16:52 : Step : Upgrade Error error code = 5000
20:16:52 : ResetStartInfo() Call
20:16:52 : _DetachDLL Call
20:16:52 : _DetachDLL Call End
20:16:52 : FreeLibrary Call
20:16:52 : FreeLibrary Call End
20:16:52 : ResetStartInfo() Call End
20:16:54 : ===FINISHED===
at IParam disconnection of device sounds are heard mutiple time until it hits the error. please help
helpp
need help anyone?
Hi,
Phone Model: F460S
Software Version: Lollipop
Rom : CloudyCat6 2.0
I was looking for a solution for my problem.
My phone is stuck in lg logo. I use LG Flash tool 2014 trying to return at v20c but stuck at 2% or 4%
Log :
22:40:14 : Start Date : 2015-07-06 22:40:14
22:40:14 : ---------- CSE mode ---------
22:40:14 : ***** Check Tool Version *****
22:40:14 : Tool version :
22:40:14 : UpgradeDLL version :
22:40:14 : Current Dir : C:\Users\Adrian\Desktop\LG Flash Tool 2014
22:40:14 : LGE USB Driver Version :
22:40:14 : Android PDLV Version :
22:40:14 : Android NDLV Version :
22:40:14 : ******************************************
22:40:14 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
22:40:15 : *****CheckOS Start********
22:40:15 : Microsoft_Windows7_Professional_Service Pack 1
22:40:15 : *****CheckPCSyncPrograms Start*****
22:40:15 : PCSyncPrograms Not Found - OK and ready to upgrade
22:40:15 : SetEmerModeAT()
22:40:16 : Verifying phone connection...
22:40:16 : dwWaitResetTime(40000 ms)
22:40:17 : _IsConnectedPhone Call
22:40:27 : _IsConnectedPhone(2)
22:40:27 : 0 - NotConnected.
22:40:27 : 1 - Normal connect success
22:40:27 : 2 - Emergency connect success
22:40:27 : Phone Mode(2)
22:40:27 : *****GetPhoneType Start*****
22:40:27 : Phone Type : CDMA
22:40:28 : *****Get ESN / IMEI / MEID Start*****
22:40:29 : Skip Backup and Restore - CSE mode.
22:40:29 : Skip Sequential upgrade info check - CSE mode.
22:40:29 : *****CheckPCSyncPrograms Start*****
22:40:30 : PCSyncPrograms Not Found - OK and ready to upgrade
22:40:31 : ****************CheckAndDownload********************
22:40:31 : Version : F460S20C_00
22:40:31 : !!*****OpenURL Start*****!!
22:40:31 : ******Extract Start C:\Users\Adrian\Downloads\F460S20C_00.kdz*****
22:40:31 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
22:40:31 : Check 2G-4G big size kdz file..
22:40:31 : Extract 2G-4G big size kdz file..
22:40:31 : NNNNN WDB FullPath(C:\Users\Adrian\Downloads\F460S20C_00.kdz)
22:40:31 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
22:40:31 : Extract End C:\Users\Adrian\Downloads\F460S20C_00.kdz
22:40:31 : 01 Skip delete kdz 1.1 file...
22:40:31 : ------------------Model.dll Information-------------------
22:40:31 : Filename : LGUP_8974.dll
22:40:31 : Version : 0.3.17.0
22:40:31 : File size : 1568256
22:40:31 : File date : 2015/07/06-22:40:31
22:40:31 : PC Created date: 2015/07/06-22:40:31
22:40:31 : ----------------------------------------------------------
22:40:31 : *****Check LGCM Programs Start*****
22:40:31 : LGCM Programs Not Found - OK and ready to upgrade
22:40:31 : m_pLGCyonUpdate status change.
22:40:32 : *****WorkModelDLL Start*****
22:40:36 : strPhoneBinaryPath(C:\Users\Adrian\Downloads\F460S20C_00.kdz)
22:40:36 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
22:40:36 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
22:40:36 : _DetachDLL Call
22:40:41 : _DetachDLL Call End
22:40:41 : Call fn_StartUpgrade
22:40:41 : Phone mode change -> CSE
22:40:41 : ********* CDMA Model.dll input Parameter *************
22:40:41 : MODEL_EVENT : 32769
22:40:41 : PhoneBinaryPath : C:\Users\Adrian\Downloads\F460S20C_00.kdz
22:40:41 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
22:40:41 : BootWaitTime : 49500
22:40:41 : UsbHighSpeed : FALSE
22:40:41 : PhoneMode : 4
22:40:41 : NewPhoneBinVersion : F460S20C_00
22:40:41 : ClearSI : FALSE
22:40:41 : AuthMark : 0
22:40:41 : ********* CDMA Model.dll input Parameter End*************
22:40:45 : wParam : 20, lParam = 540
22:40:45 : MODEL DLL Event : (20, 540)
22:40:46 : Model File Count = 540
22:40:46 : wParam : 100, lParam = 51
22:40:46 : MODEL DLL Event : (100, 51)
22:40:46 : Step : TYPE_WPARAM_UPGRADE_ERROR
22:40:46 : CleanModelDll() : Free Model.dll
22:40:46 : _DetachDLL Call
22:40:51 : _DetachDLL Call End
22:40:56 : Page_Error ºÎºÐÀÔ´Ï´Ù
22:40:56 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
22:41:03 : Call Retry Thread
22:41:03 : Verifying phone connection...
22:41:03 : Verifying phone connection...
22:41:03 : dwWaitResetTime(40000 ms)
22:41:07 : _IsConnectedPhone Call
22:42:00 : _IsConnectedPhone(2)
22:42:00 : 0 - NotConnected.
22:42:00 : 1 - Normal connect success
22:42:00 : 2 - Emergency connect success
22:42:00 : Phone Mode(2)
22:42:00 : *****WorkModelDLL Start*****
22:42:02 : _DetachDLL Call
22:42:07 : _DetachDLL Call End
22:42:07 : strPhoneBinaryPath(C:\Users\Adrian\Downloads\F460S20C_00.kdz)
22:42:07 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
22:42:07 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
22:42:07 : _DetachDLL Call
22:42:12 : _DetachDLL Call End
22:42:12 : Call fn_StartUpgrade
22:42:12 : Phone mode change -> CSE
22:42:12 : ********* CDMA Model.dll input Parameter *************
22:42:12 : MODEL_EVENT : 32769
22:42:12 : PhoneBinaryPath : C:\Users\Adrian\Downloads\F460S20C_00.kdz
22:42:12 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
22:42:12 : BootWaitTime : 74250
22:42:12 : UsbHighSpeed : FALSE
22:42:12 : PhoneMode : 4
22:42:12 : NewPhoneBinVersion : F460S20C_00
22:42:12 : ClearSI : FALSE
22:42:12 : AuthMark : 0
22:42:12 : ********* CDMA Model.dll input Parameter End*************
22:42:15 : wParam : 20, lParam = 540
22:42:15 : MODEL DLL Event : (20, 540)
22:42:16 : Model File Count = 540
22:42:16 : wParam : 100, lParam = 51
22:42:16 : MODEL DLL Event : (100, 51)
22:42:16 : Step : TYPE_WPARAM_UPGRADE_ERROR
22:42:16 : CleanModelDll() : Free Model.dll
22:42:16 : _DetachDLL Call
22:42:21 : _DetachDLL Call End
22:42:25 : Page_Error ºÎºÐÀÔ´Ï´Ù
22:42:25 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
22:45:34 : Call Retry Thread
22:45:34 : Verifying phone connection...
22:45:34 : Verifying phone connection...
22:45:34 : dwWaitResetTime(40000 ms)
22:45:38 : _IsConnectedPhone Call
22:45:38 : _IsConnectedPhone(0)
22:45:38 : 0 - NotConnected.
22:45:38 : 1 - Normal connect success
22:45:38 : 2 - Emergency connect success
22:45:42 : _IsConnectedPhone Call
22:45:42 : _IsConnectedPhone(0)
22:45:42 : 0 - NotConnected.
22:45:42 : 1 - Normal connect success
22:45:42 : 2 - Emergency connect success
22:45:46 : _IsConnectedPhone Call
22:45:46 : _IsConnectedPhone(0)
22:45:46 : 0 - NotConnected.
22:45:46 : 1 - Normal connect success
22:45:46 : 2 - Emergency connect success
22:45:46 : The USB cable is not connected with the phone.
Connect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
22:45:50 : Check Cancel button active..
22:45:50 : CLGMobileHttp Class ¼Ò¸ê½ÃÀÛ.
22:45:50 : CLGMobileHttp Class ¼Ò¸ê...
22:45:50 : Page_Error ºÎºÐÀÔ´Ï´Ù
22:45:50 : LG Mobile Phone S/W Upgrade is canceled.
To finish the LG Mobile Phone S/W Upgrade, press the 'Finish' button below.
22:45:51 : =======Cancel button click : m_nStep(8)
22:45:51 : ´Ù¿î·Îµå Áß¿¡ ÄÉÀÌºí »« ´ÙÀ½ ó¸®..
22:45:51 : Page_DeepError()- 8
22:45:51 : Problem with communication between cell phone and PC
To restart from the beginning, disconnect and connect the USB cable and battery,
then power on your cell phone and try with [Options]-[Upgrade Recovery] in tool menu.
This will normally complete update.
22:45:51 : *********** End of Page_DeepError() *********
22:45:53 : =======Cancel button click : m_nStep(10)
22:45:59 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
22:45:59 : RemoveDirectory1 Error(32):C:\ProgramData\LGMOBILEAX\Phone
22:45:59 : _DetachDLL Call
22:46:04 : _DetachDLL Call End
22:46:04 : FreeLibrary Call
22:46:04 : FreeLibrary Call End
22:46:04 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
22:46:04 : RemoveDirectory1 Error(32):C:\ProgramData\LGMOBILEAX\Phone
Sorry for my english.
how did u fixed it ???
howd u fixed that problem ??
My LG p350 did not turn on and the home, back, and the other two lights blinked for a while. Now I followed a tutorial on how to install a new firmware, but, very unexpected, KDZ_FW_UPD_EN.exe gave me an error:
[23:28:19:490] : =============================================
[23:28:19:490] : Log is started on 05.08.2015, at 23:28:19:490,
executable: C:\Users\<MYUSERNAME>\<PATH TO KDZ UPDATER>\KDZ_FW_UPD_EN\KDZ_FW_UPD.exe (ProcID: 0x000015c0),
compile time : Dec 3 2010 21:03:18
[23:28:19:490] : Version :
[23:28:19:490] : Get Usb Port
[23:28:19:494] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM11)
[23:28:19:494] : Remove Standard Serial over Bluetooth link (COM11)
[23:28:19:494] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM10)
[23:28:19:494] : Remove Standard Serial over Bluetooth link (COM10)
[23:28:19:494] : rsi.strFriendlyName=Standard Modem over Bluetooth link
[23:28:19:494] : Remove Standard Modem over Bluetooth link
[23:28:19:494] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM15)
[23:28:19:494] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[23:28:19:494] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM15
[23:28:19:494] : Port = COM15
[23:28:19:496] : UNKNOWN : Req(12) -> Rsp(13)
[23:28:19:497] : UNKNOWN : Req(12) -> Rsp(13)
[23:28:19:498] : UNKNOWN : Req(12) -> Rsp(13)
[23:28:19:498] : >> DIAG_STATUS_F FAILED
[23:28:19:503] : >>Get Model Name [DIAG_VERNO_F]
[23:28:19:504] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:28:19:505] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:28:19:506] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:28:19:507] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:28:19:508] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:28:19:509] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:28:19:509] : FAIL (No Phone)
[23:28:19:509] : GetModelName() Operation Failed Check Diag CMD
[23:28:19:509] : EMERGENCY Booting Mode
[23:28:19:509] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[23:28:19:510] : BS/P350/7Decurity\AppData\Local\Temp\DZ
[23:28:19:510] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P350
[23:28:19:521] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[23:28:19:521] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[23:28:19:532] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[23:28:19:532] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[23:28:19:533] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[23:28:19:533] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[23:28:19:533] : NV Write Fail : NV ITEM 9028(9028)
[23:28:19:633] : >> GET DLOAD COMM MODE
[23:28:19:634] : [GetCommMode] Communication mode : 2
[23:28:19:634] : Pre Nand Download
[23:28:19:634] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[23:28:19:634] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[23:28:19:645] : [COM15] >>NandFlashInitWithFile(PARTITION TBL)
[23:28:19:645] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[23:28:24:497] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[23:28:24:497] : [COM14] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[23:28:24:497] : [COM15] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[23:28:24:499] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[23:28:24:510] : [COM14] >>Dl_AsyncWrite()
[23:28:24:510] : >> AMSS FLASHING ...
[23:28:24:511] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[23:28:24:511] : Sending Pkt Seq : 0
[23:28:24:511] : Sending Pkt Seq : 1
[23:28:24:511] : Sending Pkt Seq : 2
[23:28:24:511] : Sending Pkt Seq : 3
[23:28:24:511] : Sending Pkt Seq : 4
[23:28:24:511] : Sending Pkt Seq : 5
[23:28:24:511] : Sending Pkt Seq : 6
[23:28:24:511] : Sending Pkt Seq : 7
[23:28:24:511] : Sending Pkt Seq : 8
[23:28:24:511] : Sending Pkt Seq : 9
[23:28:27:522] : RX Timeout : 3.0 seconds
[23:28:27:522] : RX TIMEOUT
[23:28:27:523] : Dl_AsyncWrite - Packet is lost! : Sent packet(9), Lost packet(10)
[23:28:27:523] : if(bPktLost == TRUE)
[23:28:28:523] : Sending Pkt Seq : 10
[23:28:28:523] : Sending Pkt Seq : 11
[23:28:28:523] : Sending Pkt Seq : 12
[23:28:28:523] : Sending Pkt Seq : 13
[23:28:28:523] : Sending Pkt Seq : 14
[23:28:28:523] : Sending Pkt Seq : 15
[23:28:28:523] : Sending Pkt Seq : 16
[23:28:28:523] : Sending Pkt Seq : 17
[23:28:28:524] : Sending Pkt Seq : 18
[23:28:28:524] : Sending Pkt Seq : 19
[23:28:31:526] : RX Timeout : 3.0 seconds
[23:28:31:526] : RX TIMEOUT
[23:28:31:527] : Dl_AsyncWrite - Packet is lost! : Sent packet(19), Lost packet(20)
[23:28:31:527] : if(bPktLost == TRUE)
[23:28:32:527] : Sending Pkt Seq : 20
[23:28:32:527] : Sending Pkt Seq : 21
[23:28:32:527] : Sending Pkt Seq : 22
[23:28:32:527] : Sending Pkt Seq : 23
[23:28:32:527] : Sending Pkt Seq : 24
[23:28:32:527] : Sending Pkt Seq : 25
[23:28:32:528] : Sending Pkt Seq : 26
[23:28:32:528] : Sending Pkt Seq : 27
[23:28:32:528] : Sending Pkt Seq : 28
[23:28:32:528] : Sending Pkt Seq : 29
[23:28:32:529] : Dl_AsyncWrite - ErrNo(45), Addr(0x00009800), NandErrNo(0x19)
[23:28:32:529] : [COM14] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[23:28:32:529] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[23:28:32:529] : Close Port<<
[23:28:32:529] : TYPE_WPARAM_UPGRADE_ERROR
[23:28:32:529] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 4008
[23:28:32:555] : Log finished
And now it doesn't do ANYTHING anymore, not even emergency mode.
I have no idea what to now from here, so help is very much appreciated.
(I also saw a guy on youtube fixing this with some special device (h t t p s : / / w w w . y o u t u b e . c o m / watch?v=POZGmcMhi7o), but I don't have that...)
Bug touch screen lg p350f!
hello, I'm new here but as a member already visit the site for some time. I have a problem on the touch screen of the LG p350f. the touch will not start the dialer icons, messages and browser. The other functions work properly. to summarize the touch just caught in the middle of the screen. help me please. thank you!
Pk just prior to bricking it, what have you done that triggered it in the first place?
#Have you actually done full backup?
#Also please be more specific, Firmware version, is it bootlooped?
#Also please upload logcat via pastebin or something, don't just copy paste like that.
Sent from my LG-P350 using XDA Free mobile app