I am new to this whole process. Last week I spent every night trying different roms on my E980 (AT&T) but none would work so I flashed back to stock 4.1.2 and rooted. Friday I made the mistake of doing an OTA upgrade to 4.4.2 but the phone continued to work fine until that night I tried to do a google search and the phone freaked out. Started vibrating and closing out screens like I was hitting the back button and then finally just went into a boot loop. Some times its the LG logo repeatedly and others it is the AT&T logo with the little jingle that plays. So I put the phone into download mode and tried to restore everything back to 4.1.2 using the flash tool but the flash tool will not pick up the phone being in d/l mode. Windows chimes like it should when its plugged in and the drivers are installed but the program will not start the software install to the phone.
What should I do?
Noggles10 said:
I am new to this whole process. Last week I spent every night trying different roms on my E980 (AT&T) but none would work so I flashed back to stock 4.1.2 and rooted. Friday I made the mistake of doing an OTA upgrade to 4.4.2 but the phone continued to work fine until that night I tried to do a google search and the phone freaked out. Started vibrating and closing out screens like I was hitting the back button and then finally just went into a boot loop. Some times its the LG logo repeatedly and others it is the AT&T logo with the little jingle that plays. So I put the phone into download mode and tried to restore everything back to 4.1.2 using the flash tool but the flash tool will not pick up the phone being in d/l mode. Windows chimes like it should when its plugged in and the drivers are installed but the program will not start the software install to the phone.
What should I do?
Click to expand...
Click to collapse
Someone please help me!
Noggles10 said:
Someone please help me!
Click to expand...
Click to collapse
Well I stumbled upon the solution by accident. Somehow the connection mode got changed to UART instead of USB. Once it was changed back the phone synced up perfectly and restored. The first time it errored out though for some reason but I retried and it worked fine.
Please excuse my ignorance but where do you change the mode to UART in the phone? I don't seem to find that option. Thanks in advance!
Sent from my iPhone using Tapatalk
Nttra said:
Please excuse my ignorance but where do you change the mode to UART in the phone? I don't seem to find that option. Thanks in advance!
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I don't know a whole lot but I do not believe there's a setting for to change that in the phone. That's why my phone wouldn't connect when the flash tool was set to sync via that method.
Related
ON 11/19/13 i was having problems with my Sprint Samsung Galaxy S3 the wifi wouldnt work, couldnt get service on it and a list of other things. I was stock rooted with TWRP recovery before and flashed the stock MD4 with flashcount reset to take it back to Sprint so they can try to fix this which they did. After it was fixed I recieved it back and right after rooted it using the Samsung S3 Tool Kit. It was a success, but now my wifi, and bluetooth wouldnt work. So i was convinced to just not do anything and keep it stock and just wait till my next upgrade which is very soon. I did a factory reset and it booted me into the stock recovery and then i proceeded with the process. So as i was doing a factory reset it kept bring a TON of red error messages. NOTHING would mount, NOTHING would wipe, NOTHING happend. But in the end it said it said that it was a success. I was very confused to what was happening ive never seen anything like this. So i was very worried hoping it would boot back up like nothing happend, and thats exactly what happend. Nothing. All it did was boot up and stayed on the Samsung logo screen. The only thing i can do was boot into download mode and recovery. I then put my phone into DL MODE and downloaded the stock sprint rom from AdamLange and flashed it using Odin. That failed obviously. So I re-installed the CORRECT drivers, tried different USB cables and USB ports, and flashed again. That still didnt work. I then used the Samsung toolkit to unroot/unbrick my phone, that didnt work either. I read every forum related to this problem and beleive me i did, i stayed up all day and night trying to figure something out, trying to get information and re-did the process at least 2 times. I am on my last resort id never thought it ended up to me asking a question on here, i dont want to sound like an idiot but i am out of options...
Sorry i made this too long but id thought id put every single thing that i did to my phone that maybe i did wrong. Id appreciate it if anyone had any tips on what to do here, any feedback and any suggestions that can help me is appreciated, thank you.
See if THIS method works for you. Then you can start the process over.
prboy1969 said:
See if THIS method works for you. Then you can start the process over.
Click to expand...
Click to collapse
Yes i tried this. That's what I use whenever I take it to Sprint for fixes. And also if i were to try it again it wouldn't mount my sd card or the internal memory, maybe flash it through Odin even if its a .zip file? My flash count is at 3, will sprint still be able to replace the devise or at least fix it? Thank you for the suggestion though.
Last night I installed geefree on my phone from the app store and used it to install TWRP. I downloaded a nightly CM11 and an appropriate gapps. Using geefree I rebooted to recovery (never figured out the button combination to boot to recovery "naturally") and installed both of the zips. This could be where I made my mistake, I installed both at the same time.
Now my phone loops, displaying the LG logo for a few seconds, then shutting off and rebooting before repeating the process. I can't seem to get it to go into download mode or the recovery menu. I've tried power+up, power+down, down+up and each of those while plugging the device in, etc. I can get the device to a hardware key control mode, though it doesn't seem too useful.
How can I save my phone? This forum has been a great resource in the past and I'm very grateful for the many tutorials I've followed rooting other devices. Hopefully you guys can save the day once again!
Volume up plus power is how to access recovery on sprint.
What stock sw version were you on before you flashed cm?
Did you wipe data before flashing?
Sent from my LG-LS970 using xda app-developers app
I was using stock 4.2.2, I believe. I didn't wipe the data (shame on me), a bad habit that I picked up from my first rooted device, the Samsung Moment. It didn't ever matter on that one, afaik. Thanks for the reply!
Edit: Volume up and power whether plugged in or not takes me to the hardware key control mode screen.
Second Edit: http://forum.xda-developers.com/showthread.php?t=2432476&page=35 I also found this thread where someone seems to be experiencing similar issues and they fix it with "LG Utility." Is that a PC application? It's a little vague to google, but I've been trying!
I have a bootloop issue every time i flash a rom i have to wipe all but sd flash roms and gapps the i do a restore from twrp and oly restore my boot image only and they boot no prob
I'm kind of starting to suspect my power button doesn't work at all for whatever reason. I have a lot of difficulty getting the phone to shut down, then it doesn't seem to easily power up. It's a strange collection of problems. Would a Sprint repair place be able to fix this?
If they have parts on hand if not either a swap out or a sendoff
Same problem here - bootloop and no download mode - CWM works! - urgently need help
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Device is recognized but can´t be mounted - bricked forever?
Parinibbana said:
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Click to expand...
Click to collapse
I tried a few things on Linux.
After terminal-command "ls /dev/sd*" when the device is unplugged from the computer I get "/dev/sda".
When the device is connected via USB, I get: "/dev/sda /dev/sdb"
So sdb is my LG G2.
So I went on to the next command: "gdisk -l /dev/sdb"
As a result I get: "Problem opening /dev/sdb for reading! Error is 123."
Does it mean that the phone isn´t mounted or what? Now I´ve connected my phone to another Linux machine with the same result. It is recognised (p.e. as sdd), but there is no sdd1. Seems as if it is recognized, but can´t be mounted. Does that mean my device is bricked for good? That´s it?
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb into the phone first then hold VOL+ and plug into usb port on the computer.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, it will shut off eventually!!
plug the phone in while in download mode to install drivers and set com ports, then unplug before you begin your flash with LGFlashTool, hope this helps you out.
Cronic2009 said:
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb in first then hold VOL+ and plug into usb port.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, hope this helps
Click to expand...
Click to collapse
Thanks Cronic2009 for your advice.
There are, however, szenarios where download-mode is not accessible any more. Neither by using the hardware-keys, nor by using the adb-command.
After four days of resarch and a lot of trial and error, I finally unbricked my F320L using the two adb-commands outlined at the beginning of that thread: http://forum.xda-developers.com/showthread.php?t=2451696
Worked like a charm.
Thanks everyone for your advice.
no problem buddy, glad you got it figured out, good luck to you from here on out!
FYI, that link doesn't work
I just wanted to ask anyone who might know, since the bootloader of the LS980 is locked, we cannot "break" this correct, so no matter what commands we decide to run through root, we cant touch the true bootloader there for LS980 fail safe? (Besides Acts of God, EMP, ect)
Cronic2009 said:
no problem buddy, glad you got it figured out, good luck to you from here on out!
Click to expand...
Click to collapse
Thanks for letting me know. I corrected the link in my previous post.
Be sure if you use a aosp based rom to flash the ZV8 modem. Your can use dr87 or furnance kernals after you flash the zva modem althought i have encountered soft brick due to this.
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
pitbullmommy45245 said:
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
Click to expand...
Click to collapse
Thank You for sharing you fixed your issue pittbullmommy but the link you posted points back to a post about a failed run on LGFlashTool, will you please fix the link and point it to the post/guide you used to fix your phone, it may help others stuck in a similar situation, glad to hear you got it fixed and working, best of luck with it from here on out!
Hi all
was just about to start a new thread but didn't want to get into trouble..anyway I am in need of some assistance please.my ls980 has been bricked for some time now been searching all over the internet for a solution to be stuck back at square one.found this video on youtube which is pretty much exactly what my phone is doing.I have used lg flash tool to revert to stock and still nothing I lost root doing that but last night,I managed to regain root access I have no idea how but it happened when i clicked ioroot batch file i went into download mode and it stated bottom left ROOTED in red so i managed that but that is it still doing what is being shown in the video its on youtube
watch?v=PjLF-pBhZSY
please if anyone has the know how I would like to fix this phone rather then bin it thank you all happy 4th everyone
After using tot and flash tool to get back to stock, did you try going into stock recovery and do a factory data reset? I know it sounds stupid especially after a tot but try it. Couldn't hurt
Sent from my LG-LS980 using Tapatalk
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Yes sir I've tried that and more to no avail is there anything I can do through adb I'm on stock recovery phone doesn't stay on long enough to install anything
sarfdawg said:
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Click to expand...
Click to collapse
You ever get her fixed?
Hello all, so yesterday I went on my tablet (Nexus 7 2013 WIFI ver.) and browsed the net a bit and went to sleep. I recall having around 30% battery power. This morning I wake up to an apparently flat battery (power button didn't turn on anything) so I just plugged it in and did something else. After a while, I took my tablet and started it with the power button. However, it got stuck on the Google logo and never fired up anything. I've rooted the tablet quite some time ago (months) so the cause is not from there.
Things I haven't recently done:
Installing an app.
Rooting or flashing anything.
Updating an app.
Things I have tried doing to fix the problem:
Booting into FASTBOOT then trying the recovery mode = still stuck on the Google logo.
Booting a custom recovery image using Wug's toolkit = frozen at the team logo (TWRP) / black screen (CWM).
Flash Stock + Unroot (Soft-Bricked/Bootloop) = FAILED (flash write failure).
So now I'm really stuck and desperate to make the device work again. I've been reading all day long and trying all sorts of solutions to no avail. And it seems far-fetched to me for a device like this to just instantly brick itself without any reason at all.
Can anyone help me with this case ? Or does anyone has any idea what just happened to my tablet ? :crying:
EDIT: I'm afraid that warranty might not work as the device was unlocked and rooted so it's the last solution for me.
Bumpity bump
No one has any idea what happened to the tablet and how to fix it ? I've tried doing some more flashing but to no avail. It just refuses to flash and keeps failing to write the files.
I think you need to leave out on the charger for 1/2hr without doing anything with it. You are probably using what little power it has charged by trying to reboot it, etc.
I had to do that once and it did the trick.
Sent from my Nexus 7 using XDA Free mobile app
There is no reason you should not be able to get in to recovery (power and volume down).
You could call Motorola. They have good tech support.
The exact same thing happened to me. I rooted it months ago and haven't changed a thing since then. It just froze up a few days ago. I restarted and it just gets stuck on the google screen. I can get into the bootloader, but when I try to go to recovery, the google screen comes up and won't go away. I've tried every method I can find for flashing the stock image and absolutely nothing is working. I just get stuck on the google screen.
Please update this if you find a solution!
Do u guys have the most up to date version of whatever particular recovery that you're on?
Yep. I've flashed the stock recovery multiple times to no avail. :/
nexusjas said:
Yep. I've flashed the stock recovery multiple times to no avail. :/
Click to expand...
Click to collapse
If you can't get into recovery or flash any images it sounds to me like a hardware failure. Bad memory maybe? If you've tried everything then RMA to Asus before the one year warranty runs out.
Have you tried to see if your computer sees your N7 by typing fastboot devices if you have the sdk installed?
wantabe said:
If you can't get into recovery or flash any images it sounds to me like a hardware failure. Bad memory maybe? If you've tried everything then RMA to Asus before the one year warranty runs out.
Click to expand...
Click to collapse
Not what I wanted to hear, but you're probably right. Thanks :/
nexusjas said:
Not what I wanted to hear, but you're probably right. Thanks :/
Click to expand...
Click to collapse
I was to slow with my update. Does your computer see your N7 with fastboot?
wantabe said:
I was to slow with my update. Does your computer see your N7 with fastboot?
Click to expand...
Click to collapse
Yes, I can get into the bootloader just fine and I can use fastboot. I go through the flashing process and the command prompt says everything flashed successfully, but when I restart the device, it hangs on the google logo. The same thing happens when I try to boot into recovery.
nexusjas said:
Yes, I can get into the bootloader just fine and I can use fastboot. I go through the flashing process and the command prompt says everything flashed successfully, but when I restart the device, it hangs on the google logo. The same thing happens when I try to boot into recovery.
Click to expand...
Click to collapse
If you fastboot flashed the factory image and can't boot up then it sounds like a hardware problem. Out of ideas, sorry.
wantabe said:
If you fastboot flashed the factory image and can't boot up then it sounds like a hardware problem. Out of ideas, sorry.
Click to expand...
Click to collapse
I'm not sure what happened, but I just ran this little utility again (I've done it many times over the last week or so to no avail) and it actually worked. Hopefully it keeps working!
Thanks for your help!
Earlier today I was using my phone I forget what exactly I was doing I think I was using the web browser or opening an app. The phone randomly restarted and after the LG Logo screen appeared I got a blue screen for about 10 to 15 seconds and the screen went off. I pulled the battery to see if that would help but that didn't work. Tried safe mode and even factory reset both times got the blue screen (can get the little menu tho) I then plugged the phone into the computer and initially I could get it into download mode. But after installing the LG drivers, and installing LG Flash Tool I went to flash it back to stock. (My phone has pretty much been stock and unrooted except for the lollipop update. ) When I went to flash the phone screen went blue and the flash tool was unsuccesful at implementing the flash. I also tried the LG Mobile Support Tool. Now intermittently I can get the phone into download mode and get the computer to recognize the phone and LG Flash Tool to the ready stage to flash but after that no luck. Any suggestions? I have not tried fastboot or kdz conversions as I dont think those apply to my problem but I could be wrong
Chris1672 said:
Earlier today I was using my phone I forget what exactly I was doing I think I was using the web browser or opening an app. The phone randomly restarted and after the LG Logo screen appeared I got a blue screen for about 10 to 15 seconds and the screen went off. I pulled the battery to see if that would help but that didn't work. Tried safe mode and even factory reset both times got the blue screen (can get the little menu tho) I then plugged the phone into the computer and initially I could get it into download mode. But after installing the LG drivers, and installing LG Flash Tool I went to flash it back to stock. (My phone has pretty much been stock and unrooted except for the lollipop update. ) When I went to flash the phone screen went blue and the flash tool was unsuccesful at implementing the flash. I also tried the LG Mobile Support Tool. Now intermittently I can get the phone into download mode and get the computer to recognize the phone and LG Flash Tool to the ready stage to flash but after that no luck. Any suggestions? I have not tried fastboot or kdz conversions as I dont think those apply to my problem but I could be wrong
Click to expand...
Click to collapse
what about your phone now? is it fixed or not? i have the same issue. please reply.
sajjadrashid said:
what about your phone now? is it fixed or not? i have the same issue. please reply.
Click to expand...
Click to collapse
I work on phones for a living. Unfortunately, i think the motherboard is bad. Nothing you can do.
Bake at 350 for 10 minutes
bloodstorm666 said:
I work on phones for a living. Unfortunately, i think the motherboard is bad. Nothing you can do.
Click to expand...
Click to collapse
I know this sounds ridiculous but I just did it this weekend and IT WORKS. I pre-heated my oven to 350, removed the motherboard (without sim and/or SD card) and placed it in the middle of my oven on a piece of white paper for EXACTLY 10 minutes. Afterwards, I let it cool and re-assembled. My phone is now working perfectly and I didn't lose any data that was on my phone. I was able to back up my data and am still using it, although I am prepared for it to fail again at any point. I know this sounds absurd but it works. I would post the link but I can't until I've placed 10 posts. I thought this was important enough to share with others and that is why I created an account here. If the moderators look at this please add the link. you can just search Google for "lg g3 blue screen fix oven" and it is the first result right now on forums.androidcentral.com. I'm gonna go ahead and use my phone until it dies again, but for the last 48 hours it has been working flawlessly.
So my mom had an LG G3 D850 from at&t. was totally fine, then she updated whatever she had to 6.0 and it started bootlooping. Tried the LG Flash tool with a tot stock firmware. Went through the whole process got the blue screen with the red 3, it restarted, kept bootlooping. Tried it again but then it got stuck on 5% for like 4 hours, unplugged it and now no matter what i do i cant get into download mode. It shows the LG screen then goes straight to firmware update (even if i dont hold vol up) and it says 910K Bxx QEM (the xx changes) I was able to get into recovery mode, recovered it. same thing. Im losing my mind a little bit here so any advice, or pointing me to a tutorial would be greatly appreciated. Ive looked all over the internet and cant find anything helpful apparently the qualcomm thing where you short the motherboard doesnt work for this phone either?
*flips desk*
If it is under warranty .send your phone to at&t to get it fixed.
Its not
Jahanzaibawan said:
If it is under warranty .send your phone to at&t to get it fixed.
Click to expand...
Click to collapse
warranty expired 6 months ago
evangelion117 said:
warranty expired 6 months ago
Click to expand...
Click to collapse
i have same
Qualcmomm method you are describing is just to bring your phone into download mode. I have done this to my brother's g3. You have to flash using LG flashtool using different settings and then hard reset your phone. If it doesn't solve your problem.try to replace battery and then use custom rom.
tried that
Jahanzaibawan said:
Qualcmomm method you are describing is just to bring your phone into download mode. I have done this to my brother's g3. You have to flash using LG flashtool using different settings and then hard reset your phone. If it doesn't solve your problem.try to replace battery and then use custom rom.
Click to expand...
Click to collapse
no matter what settings i set LG flash tool to it doesnt recognize the phone. and no matter what i do the phone jumps to the firmware update screen, it skips the download mode screen. I have two batteries and ive repeatedly switched them back and forth :/ even after reseting the phone with factory reset it goes back go the firmware update screen
evangelion117 said:
no matter what settings i set LG flash tool to it doesnt recognize the phone. and no matter what i do the phone jumps to the firmware update screen, it skips the download mode screen. I have two batteries and ive repeatedly switched them back and forth :/ even after reseting the phone with factory reset it goes back go the firmware update screen
Click to expand...
Click to collapse
Firmware update screen is the download mode.
Just follow the guide of hyelton to flash your phone.follow steps properly.
still bootloops :/
Jahanzaibawan said:
Firmware update screen is the download mode.
Just follow the guide of hyelton to flash your phone.follow steps properly.
Click to expand...
Click to collapse
totally forgot to switch to com41, did everything exactly like that. got to the red 3, restarted it, and it still bootloops. i guess ill try a custom rom cause this stock one isnt working.
apparently cant do custom roms either, I got it to boot the the set up screen for 5seconds befores it crashed so i guess im throwing it away cause im sick of looking at it.
evangelion117 said:
apparently cant do custom roms either, I got it to boot the the set up screen for 5seconds befores it crashed so i guess im throwing it away cause im sick of looking at it.
Click to expand...
Click to collapse
Try LG PC Suite go to option update error recovery it will download the stock rom flash it dont worry it will take some time so be patient also what happened is when ur g3 wasnt fully updated meaning it got stuck or turned off when updating
.hit like if its helps