Related
Really seeking input those who are rooted/have been rooted for awhile. I know x64 support for Xposed is a recent thing, but I've tried multiple builds of it for 5.X.X and even with @rovo89's latest build (v75/sdk21/arm64 from here: http://forum.xda-developers.com/showthread.php?t=3034811 I have no luck. After flashing Xposed, the phones boots up (usually very slowly, it'll sometimes even play the boot animation frame by frame) then it freezes at the end of the boot animation.
Tried reboots, wiping cache, etc. Luckily the uninstaller from the thread fixes everything. I assumed it would work due to it working on other M9 models but maybe I'm doing something wrong? Has anybody else managed to get Xposed working?
All help appreciated!
Same problem.
V78 did not work too.
I really need Xposed.
Tapatalk を使用して私の SO-01G から送信
I´ve read that its on alpha stage but hope soon goes beta at least.
Sure then will work on our great B3!
V79 is coming.
It worked perfect.
Best Xposed
v79 is the first version that will work, personally I installed v81 of sdk21 and it works very well. Just download the zip and flash it in twrp.
Hi!
Little background: I've had about every Nexus device that has been released and I've rooted them all, changed all their custom recovery, installed XPosed and fiddled around with ROMs all manually using adb and fastboot (never used a 1-click tool). Of course this is all relatively easy, since you can just go back and flash the original image if you mess something up.
Problem is, I messed up the LG G Pad and I'm kinda stuck. What I did to mess it up:
- No way I'm going without root and there's no way to flash a custom recovery
- Install Kingroot apk, ran it, got root
- Install supersu-me to remove kingroot and replace with SuperSU (the one I usually use and install via a zip in custom recovery)
- Reboot device....bootloop
- Find out the magical sequence to factory reset, do it
- Same bootloop
So it's now just stuck at the LG Life's Good (no it's not!!!) and I can't seem to be able to get adb to work anywhere, I've also gone into download mode, but I can't do much in there.
I'm open to all suggestions
Solution found?
Have you found a solution yet?
WarpedMonkeys said:
Hi!
Little background: I've had about every Nexus device that has been released and I've rooted them all, changed all their custom recovery, installed XPosed and fiddled around with ROMs all manually using adb and fastboot (never used a 1-click tool). Of course this is all relatively easy, since you can just go back and flash the original image if you mess something up.
Problem is, I messed up the LG G Pad and I'm kinda stuck. What I did to mess it up:
- No way I'm going without root and there's no way to flash a custom recovery
- Install Kingroot apk, ran it, got root
- Install supersu-me to remove kingroot and replace with SuperSU (the one I usually use and install via a zip in custom recovery)
- Reboot device....bootloop
- Find out the magical sequence to factory reset, do it
- Same bootloop
So it's now just stuck at the LG Life's Good (no it's not!!!) and I can't seem to be able to get adb to work anywhere, I've also gone into download mode, but I can't do much in there.
I'm open to all suggestions
Click to expand...
Click to collapse
Sadly my solution was to send it back. I said it stopped working after a Factory Reset, which isn't totally false. They accepted the RMA and I'm not going to root the new one I received.
Got stuck on my 495. Unfortunately I bought it second hand so I don't know if they will warranty my repair. err.... I'm hoping to find a solution. Did you ever try the LG Bridge software? I've had no luck with it.
PHP:
Hello. To root an lg-v497 simply use the mobile go trial on pc. To reset the tablet if it is in a boot loop simply use the lg support tool. You need to install the v500 driver for it to connect to the tablet. Factory reset will not fix it. You must re-flash firmware in this way.
Of course this may not be of use to many but it is what i have found works best. Hope this helps somebody. I went through that exact same scenario as you did, OP, and that is how i solved it. BUT now i am trying to find a way to crack the bootloader because i want to fix or get rid of 5.0.
Any Chance you could put links to the support tool and the driver? If I have KingRoot on already, should I restart or just uninstall before rooting with Mobile Go?
My account is apparently too new to post the links but just google the lg mobile usb driver and go to lg support page for the tool
To do a fresh flash you go to update recovery in the top menu when connected.You may have to fiddle with it a bit, good luck.
Flash it before using mobilego. Kingroot is a plague and you should get rid of it first.
Is the method for installing xposed in the general section still valid?
Il installed xposed about 6 times in my life in my g4.
The first 4 went smooth.
The last 2 were done in the past few days, and each resulted in a bootloop.
I just got my phone working with a non rooted kdz, I'm gonna flash a rooted 13b image later and hopefully would like to install xposed,
Anybody know why xposed install made my phone crash and bootloop the last 2 times?
Im gona istall xposed on 5.1 with the rooted img provide these by @Prime
I read throughout the page of installing xposed and some mentioned using an older version of flash fire. I thought that was the problem. But I tried an older flashfire yesterday (and did not check auto mount)
But still resulted in a bootloop.
So basicly, my question(s) is does the "how to install xposed" still work?
What's the correct method?
Am I missing something?
Is there a newer way?
I triple checked that I was using the correct files when flashing btw.
See this thread:
http://forum.xda-developers.com/verizon-g4/general/guide-install-xposed-verizon-g4-t3182267
Is the bootloop you are experiencing the one with the dead bugdroid. If so how did you recover from the loop.
Hello,
[Sorry: can't edit title]
I've been trying to install Lineage 14.1 on my Samsung Galaxy Tab Pro (SM-T520), and haven't been successful.
I keep getting the message "Google Services Framework keeps stopping", sometimes alternating with the message "android.process.media has stopped".
I've used the following installation procedure:
1. Starting with the stock Samsung Android v4.4.2, I used Odin v3.1.2, to root the device, by installing
CF-Auto-Root-picassowifi-picassowifixx-smt520.tar.md
2. I used Odin to install picassowifi TWRP v2.8.7.0. I didn't use the latest v3.1.1-0, because it reboots the
device while making Nandroid backups. Available here
https://eu.dl.twrp.me/picassowifi/
3. I copied several versions of Lineage OS amd Gapps (see below) to the device's SD card
4. I used TWRP to wipe the cache/dalvic/data/system each time, using the Wipe->Advanced option
5. I used TWRP to install the Lineage OS amd Gapps as an atomic operation on the device
6. After installation, I rebooted from TWRP:
- without rooting: I get the message "Google Services Framework keeps stopping"
- with rooting, by installing SuperSU: The device enters into a boot loop, displaying the sliding Lineage logo
I followed the same procedure to update my Samsung Galaxy S4 Mini, and it worked flawlessly.
I tried the following Lineage OS versions, available here:
https://download.exynos5420.com/LineageOS-14.1/n2awifi/
lineage-14.1-20170506-UNOFFICIAL-n2awifi.zip
lineage-14.1-20170715-UNOFFICIAL-n2awifi.zip
I also tried the folowing Lineage OS versions, available here:
https://download.lineageos.org/n2awifi
lineage-14.1-20170608-nightly-n2awifi-signed.zip
lineage-14.1-20170713-nightly-n2awifi-signed.zip
I tried the following versions of Gapps, available here (32-bit arm, Android v7.1, stock variant):
http://opengapps.org/?api=7.1&variant=stock
open_gapps-arm-7.1-stock-20170505.ziip
open_gapps-arm-7.1-stock-20170711
I tried several combinations of these 2 packages. With all the combinations I tried, I got the results summarised above.
This post suggests installing Lineage OS alone without Gapps, and then install Webview Implementation, if not installed:
http://www.lineageosrom.com/2017/02/how-to-fix-google-play-services-error.html
When I tried this and reboot, I get the messages "android.process.media" has stopped, followed by the message "clock has stopped". When I click away these messages, and click on next on the Lineage OS screen, the device enters into a boot loop displaying the sliding Lineage logo. This agrees with the Lineage recommendation, that both packages need to be installed at the same time:
https://wiki.lineageos.org/devices/n2awifi/install
Can anyone please help? I really don't want to go back to Android v4.4.2 on my SM-T520.
Hello so to get rid of the error I would suggest downloading samsung kies 1 not 2 or 3 and flashing completely back to stock then try rooting and flashing rom should get rid of system errors and force closes. Kies will ask you for model and serial number. Serial is found on back of the tablet. As another suggestion I would try resurrection remix by cosmox. It is very stable everything works. I just posted a link in that thread with a link to download samsung kies for a 64 bit windows and other relevant files if you need. Let me know if you need any other help. Also closer inspection of your links. I think for sm-t520 u should be using twrp Picassowifi, not n2awifi so idk if that will work or not. Not sure about that part though because they may have made it work on Picasso.
Thanks paintball.
I confirm that I had used picassowifi TWRP. I've edited the original post to indicate this.
I've also tried what you suggested - I reinstalled the original stock Samsung firmware using Odin, and used TWRP to again install Lineage. Same result, still displaying the same Google Service errors.
I'll look at the Resurrection remix.
Paul
paintball,
I've found a solution, that I thought I'd post here in case anyone else has the same problem.
I wiped the cache/dalvic after each step of the installation:
Wipe-> Advanced -> wipe cache / data / dalvic / system
Install -> flash Lineage -> wipe cache/dalvic
Install -> flash Gapps -> wipe cache/dalvic
Reboot -> don't install SuRoot
I got a Music closed error during the first boot, which hasn't appeared since.
Afterwards, I used Odin to install CF-Auto-Root. The device rebooted twice after this step, but now appears to be OK.
A final problem I had was that it couldn't find my wifi SSID. I solved this by setting wifi region to Europe.
ppmoore said:
Thanks paintball.
I confirm that I had used picassowifi TWRP. I've edited the original post to indicate this.
I've also tried what you suggested - I reinstalled the original stock Samsung firmware using Odin, and used TWRP to again install Lineage. Same result, still displaying the same Google Service errors.
I'll look at the Resurrection remix.
Paul
Click to expand...
Click to collapse
I suggested using Samsung kies which I'm positive works, not Odin, but I'm glad you got it fixed.
ppmoore said:
Hello,
[Sorry: can't edit title]
I've been trying to install Lineage 14.1 on my Samsung Galaxy Tab Pro (SM-T520), and haven't been successful.
I keep getting the message "Google Services Framework keeps stopping", sometimes alternating with the message
<snip>
Click to expand...
Click to collapse
I'm having a similar issue. Mine differs in the following ways.
I was able to successfully install and run LineageOS with OpenGApps full, but reverted to a nandroid backup because I needed some information from the original install. Since then, I have been unable to get past the initial couple of screens for setting things up--and this with the constant "Google Services Framework keeps stopping" error.
I have tried most of the "fixes" I've found but to no avail. I notice that, (1) when I go to the drop-down menu and setup WiFi, as soon as the device connects to the Internet, I go to the Lineage bootup animation and get stuck there. If I hard boot from there, I can get in up to the point where I connect to the Internet (not just router, but actually get through to the Internet) and (2) I cannot enable Developer options--when I try, no matter how many times I click on the Build number, I get no indication of the options being enabled.
I have tried several permutations of Lineage OS nightlies along with various flavors of OpenGApps, with and without root, wiping cache/dalvik/data/system, wiping only some, wiping none.
I also cannot restore the backup of the running LOS that I had up (I did take a backup before going back to the original setup). When I try, I get the same results as above--as if I had backed-up an un-instantiated setup.
Any thoughts?
eckster said:
I'm having a similar issue. Mine differs in the following ways.
I was able to successfully install and run LineageOS with OpenGApps full, but reverted to a nandroid backup because I needed some information from the original install. Since then, I have been unable to get past the initial couple of screens for setting things up--and this with the constant "Google Services Framework keeps stopping" error.
I have tried most of the "fixes" I've found but to no avail. I notice that, (1) when I go to the drop-down menu and setup WiFi, as soon as the device connects to the Internet, I go to the Lineage bootup animation and get stuck there. If I hard boot from there, I can get in up to the point where I connect to the Internet (not just router, but actually get through to the Internet) and (2) I cannot enable Developer options--when I try, no matter how many times I click on the Build number, I get no indication of the options being enabled.
Any thoughts?
Click to expand...
Click to collapse
Hi Eckster,
I have exactly the same problem on a LG G2 with LOS 14.1. It ran July version perfectly but I didn't make a backup and now I'm stuck. Did you ever manage to fix this?
Thanks,
Kevin
Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.
detlef25 said:
Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.
Click to expand...
Click to collapse
how did you format the partitions? I can only find "format data".. thx
detlef25 said:
Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.
Click to expand...
Click to collapse
:thumbsup: I was on lineage 14, all was well. I tried an old stock rom NK2, that was fine. I tried to restore lineage backup via twrp, got this problem with the framework crashing. No amount of re-flashing twrp nor lineage, gapps, modem, bootloader, etc nothing worked; always crashed right after boot to lock screen. Finally twrp "format data" - yes. Now lineage boots to welcome, no crash; restore backup - after copying it back to internal - and all is good.
I'm glad it works but why is it needed in this case to remake the filesystem on data - does it work by removing some bad file or does it work by rebuilding the ext4 and security context? this is with latest twrp twrp-3.2.1-0-klte.
Hi,
don't know if you solved it eventually, or maybe helpful for other people with the same problem. I had the same problem, spent 6 days digging around on the internet why the framework keeps stopping and crashing.
I eventually found out that:
- TWRP 3.0.2.0 is WAY more stable than 3.1.1.0 (which never succeeded in installing gapps without crashing)
- Wiping system, data, dalvik recovery and internal storage is not the only thing that needs to be done. You also need to use the 'FORMAT DATA" button (everything will be wiped from your tablet, so, as always, backups )
- After that, install the lineageOS binary, after the installation, wipe dalvik/cache, go back and install the appropriate GApps package, wipe dalvik/cache and reboot
Say whatever you need to whatever deity you prefer and wait for the tablet to boot.
I hope to be of some help to other people having the same problem
Code:
Sent from my SM-S920L using Tapatalk
grammar
detlef25 said:
Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.
Click to expand...
Click to collapse
Was going crazy trying to figure out why LineageOS was encountering so many ANRs. The first time I flashed Lineage it worked beautifully but every time after that it just went nuts. This fixed it for me, thanks dude!
Note to others who may end up here, after formating data I had to install a stock ROM, then wipe and install Lineage. Lineage wouldn't install due to Updater process ended with ERROR: 7 which was because there was some bit of information that was on the data partition that showed the install script that the phone was actually a Note II. Formating data blows that info away but installing stock puts it back on.
LievenVanh said:
I eventually found out that:
- TWRP 3.0.2.0 is WAY more stable than 3.1.1.0 (which never succeeded in installing gapps without crashing)
- Wiping system, data, dalvik recovery and internal storage is not the only thing that needs to be done. You also need to use the 'FORMAT DATA" button (everything will be wiped from your tablet, so, as always, backups )
- After that, install the lineageOS binary, after the installation, wipe dalvik/cache, go back and install the appropriate GApps package, wipe dalvik/cache and reboot
Click to expand...
Click to collapse
Coming into this thread after a few hours of struggle with an old GS4 I can say that this method instantly worked for me as well.
Thanks!
Thanks for the help to resolve my issue of installation. Do you have a solution for Zoom , where my audio (cannot hear other speakers) and video is missing. Did enable access for Mic, Camera etc in App permission.
Look at this thread: https://forum.xda-developers.com/ga...-t520-unofficial-lineage-14-1-t3538770/page86 -- last two posts
hamudistan said:
Look at this thread: https://forum.xda-developers.com/ga...-t520-unofficial-lineage-14-1-t3538770/page86 -- last two posts
Click to expand...
Click to collapse
That solution didn't work. My Zoom audio still not working.
[HELP][G3][VS985]issue connecting to PC on fastboot, need to reflash TWRP & SuperSU
Hello, thank you for this great forum with helpful members, I'm having an issue with an LG G3 VS985, fastboot won't recognize it while in bootloader, I need to reflash TWRP.
First of all, thank you for reading this long testament [most important details in bold if TL;TR], wanted to be as detailed as possible, maybe it will help you help me better hehe sorry about that.
Let me give you the event sequence if it helps.
> Phone had Cloudy G3 2.5 rooted with SuperSU and TWRP 2.8.6.0 since I rooted it back in 2016.
I was having some issues with phone not recognizing micro sd card and OTG-USB after messing around with encrypting it, I was curious but didn't need it, anyways. Although I dropped the phone in water a couple weeks prior so there is a chance the issue is hardware related.
That was like 4-5 months ago.
Finally decided to do a file backup and reinstall everything yesterday apr-5-2019.
> Rebooted into TWRP and erased everything (data, cache, dalvik, system, even internal storage) because I wanted a new install on everything.
> Flashed the latest official TWRP version for my device (3.0.2.0)
> Had a lot of issues flashing crDroid, found out I downloaded the wrong build, although I had to edit updater-script on the right one to make it work.
> Flashed crDroid 5.2_20190326 with open GApps for Android 9.0 Stock
> First issue encountered, I couldn't charge the phone turned off, because the battery logo appears but but doesn't do the animation and reboots the phone, I read it might be an issue with TWRP.
> Tried to flash SuperSU 2.82 SR5 with TWRP but had a LG secure boot error and couldn't boot up android.
> RE-flashing android and open GApps fixed this issue.
> Re-attempted the process several times, even wiping everything down more than a couple times, including re-flashing android several times to no avail, I was not able to flash SuperSU successfully.
I even flashed an old tool "MR.Bump" but system kept unrooted so unsuccessful.
> Reflashed Android for the last time and start reading again (after 8 hours attempting to do it well), I read that TWRP version might be the problem to flash SuperSU, so
HERE is where I have the current issue:
> Downloaded the official TWRP version 3.1.0 and flashed it.
There is no official support for 3.1.0 for the VS985 so I'm guessing it was a generic .img, of course I messed up TWRP.
> Downloaded and installed official LGMobile Drivers 4.2.0 (latest), downloaded android drivers (15 second ADB installer 1.4.3) and Android platform tools 28.0.2 on windows.
> When conected in PTP and transfer files in win7 it recognizes all the drivers well, was able to reboot the phone into bootloader from android platform tools successfully, means there is good communication between the device and PC.
The issue is once the phone is in the bootloader and trying to flash TWRP, win7 has issues installing CDC serial drivers, in the end in device manager all drivers seems installed but win notification center says there was a problem installing LGE AndroidNet for VZW USB Modem, seems to be issues with CDC Serial or something, when trying to access the properties on the VZW USB Modem it freezes so there's an issue here.
That means when doing adb devices or fastboot devices command, doesn't find anything.
Tried the same in win10, had different driver problems but in the end everything gets installed after rebooting. Same issue, no response from phone when in bootloader.
Message is "Waiting for any device".
Maybe there is an issue with some low-level driver/kernel/firmware that is creating this issue, I would even consider to flash stock LG Android to start from scratch, if you have any guide on how to do it please provide the links!
Additional note: When connecting the phone in USB Tethering win7 gives bluescreen.
> FORTUNATELY I messed TWRP but the phone can still boot android so it's not rendered unusable (yet lol).
I must admit I wasn't super careful downloading some stuff, I did it old school (trial and error) and most of the times it works, I consider myself being a little tech savvy, but right now I'm stuck, I guess I could continue using the phone like this but if I have any issues it would be difficult to resolve and I would lose functionality without root (I could live unrooted though but I wanna resolve this) and honestly I love the G3 so why change it? haha.
BTW I found these on the net, do you recommend it? what TWRP do you recommend for the VS985?
I downloaded and wanted to install this one https://forum.xda-developers.com/lg-g3/development/recovery-unofficial-multirom-twrp-artx-t3657524
and found this one supposedly 3.2.1 for the vs985 here: https://basketbuild.com/devs/yshalsager/TwrpBuilder/lge/vs985
Any help will be greatly appreciated.
Cheers.
I posted it on a different area and got no response, so here it is the G3 area.
@disrupted_mind, wow, that was a great detailed post. Alas, can't think of anything much to suggest at the moment. Just a few things come to mind.
Make sure to use a USB 2.0 port on the computer. I've heard of issues with USB 3.0.
Use a good cable but I assume yours is good or original.
There's another TWRP from @HardStyl3r, v3.2.3. Since he's one of our last ROM devs I'm sure it might be the one to use, especially if you're trying Pie.
https://forum.xda-developers.com/showthread.php?t=3813552
[RECOVERY][3.2.3.0][UNOFFICIAL] TeamWin Recovery Project for LG G3
Let us know if that one works or not.
LG G3 D851, AOSPA-L ROM, Nebula Rev9.3 Kernel, microG (NoGapps), MultiROM, XDA Legacy
marcdw said:
@disrupted_mind, wow, that was a great detailed post. Alas, can't think of anything much to suggest at the moment. Just a few things come to mind.
Make sure to use a USB 2.0 port on the computer. I've heard of issues with USB 3.0.
Use a good cable but I assume yours is good or original.
Click to expand...
Click to collapse
Thank you for replying, now that you mention it, all the ports on the PC's I've tried are USB 3.0, I think I have an older lappy with USB 2.0 and I will try that next. If that doesn't work I was planning on rooting the phone temporarily with kingroot or kingoroot, so I can use flashify and re-flash TWRP (just thought about it last night hehe) and then re-flash the ROM since according to this thread, kingroot and kingoroot might be malware.
marcdw said:
There's another TWRP from @HardStyl3r, v3.2.3. Since he's one of our last ROM devs I'm sure it might be the one to use, especially if you're trying Pie.
https://forum.xda-developers.com/showthread.php?t=3813552
[RECOVERY][3.2.3.0][UNOFFICIAL] TeamWin Recovery Project for LG G3
Let us know if that one works or not.
LG G3 D851, AOSPA-L ROM, Nebula Rev9.3 Kernel, microG (NoGapps), MultiROM, XDA Legacy
Click to expand...
Click to collapse
Thanks, yes, precisely yesterday I kept reading trying to find a solution and bumped into @HardStyl3r's version, already downloaded it
I like Pie very much by the way, but I think it drains the battery a little faster than CloudyG3 (android 5), maybe the old hardware struggles too much haha, but I will keep using it for some time. By the way, do you think AppOps is still necessary with Android integration to allow/deny permissions (sorry, noobie question since I'm just transitioning from old to newer android with that feature).
Any ideas on the charging the phone off issue?
I will update the thread with any news
Cheers.
I have good news and bad news.
I was able to reflash stock KitKat using TOT method, only way it could work since I had no connection to PC with fastboot commands on cmd.
Updated android over the air and PC, it update to 5.0.1 over the air and wanted to go faster so tried to do it from PC, what a mistake, when I was downloading Marshmallow info on xda I found that it might be difficult to root android 6, so cancelled the operation from LG Update Software on PC. That went "fine", didn't update to Marshmallow.
Rooted the phone using the One-Click root method, worked fine apparently. Installed flashify and flashed the Unofficial 3.2.3 TWRP, that didn't go well, I dont have access to Recovery mode nor Bootloader/Download mode now. "Recovery" ("vol-" + "Power Button") mode gives "certificate/secure boot error", Regular "Bootloader/Download mode" is non-existant or I can't access it in any given way, tried "vol+" while off + "Power Button", tried to reboot to it from Rashr, nope, it just continues to boot android, the other "Download mode ("Vol+" + "Connect USB cable to PC")" (don't know if it's the same as Bootloader) gives "certificate/secure boot error". I even flashed the latest official TWRP for vs985 and 2.8.6 that I knew definately worked before, didn't work.
I was able to boot into fastboot following "this" thread but it doesn't perform commands.
When booting to Android I kept receiving notification that I had a pending update, I managed to wipe /data and /dalvik from adb shell, that resolved that issue.
Attempted to reflash stock KitKat again, but I can't, since phone doesn't have bootloader or recovery no more.
At least I still have working rooted 5.0.1 Lollipop, but have the other issues. I want to attempt to re-flash aboot.img, laf.img and sbl1.img to fix those issues but since its my main phone don't want to hard brick it right now.
Any input is welcome and appreciated, will keep reading a lot, think I might open a different thread for this.
Cheers.