Has anyone successfully gotten viper4 android working on verizon G4? I have tried everything, and it still won't process.
Edit - http://forum.xda-developers.com/lg-g2/general/guide-poweramp-viper4android-lollipop-t3133935 Second solution seemed to have got it going.
Yes. I used ROM Toolbar to make a script that runs at boot. Works flawlessly now.
Tried second method and can't it it to work. Any suggestions?
I had problems getting this to work. In the end I got it to work by setting linux to permissive using selinux then unchecking nu player in dev options and then installing the apk in the zip, installing the driver and rebooting.
Related
Hello everyone
I have been really confused about this and i want to confirm if Viper4Android is working on our phone or not... And if its working can someone write a short guide on how to install Viper4Android and its drivers...
Working great.. no special things for installation... just install app, open app and install driver, reboot
mhp1995 said:
Hello everyone
I have been really confused about this and i want to confirm if Viper4Android is working on our phone or not... And if its working can someone write a short guide on how to install Viper4Android and its drivers...
Click to expand...
Click to collapse
Not working here. always asks to install the driver after reboot.
To get it working all I did was root my phone, installed viper4android.
After opening the app it asked to install the drivers I let it, then rebooted
everything worked just fine.
Viper4Android needs your phone to be on Permissive Kernel.
Working!!! Ty everyone will post a link and how-to install guide in my thread
bmwkeith said:
Not working here. always asks to install the driver after reboot.
Click to expand...
Click to collapse
you probably forgot to set your selinux to permissive. download selinux mode changer here on XDA and the u'll be able to install the driver
Anyone know how to get convolver to work with CM 12.1 nightly on z00A?
Hi, can somebody confirm that Viper4android works without issues on the original rom?, i mean by this that after a reboot the app starts itself, as in my case I have to start the app to get its functionality working on my player
Thanks
is viper4android safe? It asks for a lot of permmisons
yeah viper4android is safe i have been running it since my galaxy s3 and never looked backed best app i have ever come across as far as boosting audio quality.
also guys having problems with not hearing any differance i had the same problem at first then i found a thread in general with a modified audio_policy.config file i had to replace with the original one then v4a worked a charm also kernel has to be permissive too so try it again with the modified audio_policy if you gave up because i nearly did
Not really working for me. I did the se permissive then installed v4a then installed driver and reboot. Now I'm using it mainly for Spotify and it works sometimes but then sometimes it will stop working unless I unplug the headphones and plug back in or sometimes it just stop working at all
Download the viper 4 android guitardedhero bought in my Zenfone max working.
Hello.
after successfully rooting my G4 and installing busybox.. I have also installed V4A. however, after installing the drivers, I can't get them to actually work.. (driver status shows unsupported and abnormal.)
anyone knows if V4A works with the G4? and if so, how did you get it to work?
thanks!
Gammawing said:
Hello.
after successfully rooting my G4 and installing busybox.. I have also installed V4A. however, after installing the drivers, I can't get them to actually work.. (driver status shows unsupported and abnormal.)
anyone knows if V4A works with the G4? and if so, how did you get it to work?
thanks!
Click to expand...
Click to collapse
You need to set kernel to permissive. Selinux switcher apps will correct your issue.
I set to permissive installed v4a of viper and used awesome player instead of nu player. Yet changing eq doesnt do anything
auggie246 said:
I set to permissive installed v4a of viper and used awesome player instead of nu player. Yet changing eq doesnt do anything
Click to expand...
Click to collapse
TUrn off any EQs that you may have on in your music player.
And if you go into the settings menu > Driver status > What do you see here?
After setting to permissive you should get a different message at the bottom when you access V4A compared to when you didn't have it (If you kept note)
Here is a great guide how to make it work: http://forum.xda-developers.com/g4/general/to-root-apps-t3165390/post62107040#post62107040
In addition to the above, I had to force enable V4A and switch to FX compatible mode to get Spotify to work. My other apps worked without those changes.
About gave up for months, then it clicked in my mind when i saw a post mention to make sure all other audio apps redirect eq to viper, and if not, change them. Even if you dont use a certain audio player app, change it too.
Problem is, i could not get the lg music app (which i never use) to change the equalizer to viper, it just had it's own default settings, so i ignored it. So i decided to revisit the lg app, and froze the app with link2sd, i also froze the lg video app too, just in case. Rebooted and now viper sees NEON and i can even run without compatibility mode (which did not work consistantly for me) .
I tried all steps to get this to work, not sure what other things are needed for everyone else, but i tried moving viper to system, installed selinuxmodechanger, maybe this can be uninstalled now, i have no idea. I have no plans to fix what isnt broken and find out myself, so just try freezing lg music app for starters.
Hope it works for you, if so, let the community know what steps you had to do!
I got the HTC 10 not too long ago and I have been really happy with the phone. My only complaint is there isn't a good equalizer for it to work on Bluetooth audio devices.
I've been using Viper4Android for a few years now and haven't ran into many problems with it. My issue now is when I try to install the audio drivers, it prompts me the drivers installed successfully and reboot, but when I reboot, it prompts me to install the drivers again and the driver status says it isn't installed. My phone's bootloader is unlocked and properly rooted, has busybox installed and has SuperSU granted for Viper so I really don't know what is causing this problem.
Is there any way to get Viper audio drivers installed or is there a decent alternativeto it that works on the 10?
Have not tried yet with the 10 but maybe you need to change to permissive and I think you also need a kernel that allows permissive. Any that's what I'm used to with the Nexus 5.
Sent from my Nexus 5 using XDA-Developers mobile app
ThatGuy94 said:
I got the HTC 10 not too long ago and I have been really happy with the phone. My only complaint is there isn't a good equalizer for it to work on Bluetooth audio devices.
I've been using Viper4Android for a few years now and haven't ran into many problems with it. My issue now is when I try to install the audio drivers, it prompts me the drivers installed successfully and reboot, but when I reboot, it prompts me to install the drivers again and the driver status says it isn't installed. My phone's bootloader is unlocked and properly rooted, has busybox installed and has SuperSU granted for Viper so I really don't know what is causing this problem.
Is there any way to get Viper audio drivers installed or is there a decent alternativeto it that works on the 10?
Click to expand...
Click to collapse
Flash this. Once flashed,you can replace with current version of Viper located in the priv app folder.
jrock79 said:
Flash this. Once flashed,you can replace with current version of Viper located in the priv app folder.
Click to expand...
Click to collapse
Awesome it works like a charm! It even includes the patch where it allows you to use it even if selinux is set to enforcingso you don't have to get a permissive kernel.
I feel what it boils down to is there is probably some sort writing protection to the system that prevents it from being installed by normal means
ThatGuy94 said:
Awesome it works like a charm! It even includes the patch where it allows you to use it even if selinux is set to enforcingso you don't have to get a permissive kernel.
I feel what it boils down to is there is probably some sort writing protection to the system that prevents it from being installed by normal means
Click to expand...
Click to collapse
How did you end up getting it installed? Selinux set to permissive, still couldn't get it to install so I tried this older version but it hangs and won't load, and I can't find the Priv App folder mentioned.
Sorry if it's not quite related, but, what exactly does the application interface install as "drivers?" I need those files to manually install Viper.
Every time I return to stock or try out a new rom, one of the first things I do is install V4A. Well, I try. After taking care of the prerequisites (rooting, busybox, making a backup), I install the V4A app but when I try to install the driver I always get the error message about a bad busybox install. So, why is that busybox says it installed just fine and I get no errors from any other apps (Honestly, not sure if I have any other apps that use busybox for anything) but V4A refuses to install that driver on any rom?
To be clear; I have had V4A work just fine before but, more often than not, it simply does not want to cooperate. This particular time I'm trying out the ResurrectionRemix rom (T700), but I can't even get V4A working on stock either. Yes, I flashed the 2 zip files from the appropriate thread.
This v4a workaround for the Galaxy S6 is working flawlessly with all ROMs I have tried so far on my Tab s:
http://forum.xda-developers.com/galaxy-s6-edge/themes-apps/viper4android-s6-edge-root-t3072183
Best, maris
maris__ said:
This v4a workaround for the Galaxy S6 is working flawlessly with all ROMs I have tried so far on my Tab s:
http://forum.xda-developers.com/galaxy-s6-edge/themes-apps/viper4android-s6-edge-root-t3072183
Best, maris
Click to expand...
Click to collapse
Fantastic! It worked. Subscribed and bookmarked.
maris__ said:
This v4a workaround for the Galaxy S6 is working flawlessly with all ROMs I have tried so far on my Tab s:
http://forum.xda-developers.com/galaxy-s6-edge/themes-apps/viper4android-s6-edge-root-t3072183
Best, maris
Click to expand...
Click to collapse
Well, this was working. For whatever reasons, it decided to stop. It asked me again to install the driver but it now says it failed because of busybox. I've done everything including restoring stock through Smart Switch and trying from scratch and it still didn't work. It seems I'm the only one having all these problems with v4a.
Sent from my SM-T700 using Tapatalk
noxarcana said:
Well, this was working. For whatever reasons, it decided to stop. It asked me again to install the driver but it now says it failed because of busybox. I've done everything including restoring stock through Smart Switch and trying from scratch and it still didn't work. It seems I'm the only one having all these problems with v4a.
Sent from my SM-T700 using Tapatalk
Click to expand...
Click to collapse
I am having the same exact problems as you. I followed everything exact to the T and V4A never worked; though I have not done the above method (yet). I'm running the 10.5 with ironrom v2.5.5 rooted.
Has anyone here got ViPER4ANDROID working correctly? For some reason, it's not working so well for me(e.g: sometimes work, sometimes doesn't). I have heard of ViPER4ANDROID MKM, what is it and how is it different from the original V4A?
Thanks for reading this. Would appreciate it if anyone could answer it.
In my n9300 (HK), yes
Hello.
I use the V4A MKM, and it works well.
I think it uses V4A as a base, and somehow changed.
I'm not an expert, so the better is to go to the dev's post and read it.
As I say, it works well for me, but I had to do some creative action.
First I stoped the soundalive and put the folder on my sdcard.
When I flashed the V4A MKM, installed the drivers and reboot it, the information I got was that the drivers had been installed, but it was not processing.
Indeed, I didn't had any output from V4A MKM. The sound was the same as ever.
What I did:
I flashed the V4A for s7 edge. I tried to install the apk, but couldn't.
After that, I opened the V4A MKM apk, every configuration I had done was in order, and It was processing.
Don't know why, but it worked fine.
Hope this will help