Is Viper4Android FX working with a rooted G4? - G4 Q&A, Help & Troubleshooting

Hello.
after successfully rooting my G4 and installing busybox.. I have also installed V4A. however, after installing the drivers, I can't get them to actually work.. (driver status shows unsupported and abnormal.)
anyone knows if V4A works with the G4? and if so, how did you get it to work?
thanks!

Gammawing said:
Hello.
after successfully rooting my G4 and installing busybox.. I have also installed V4A. however, after installing the drivers, I can't get them to actually work.. (driver status shows unsupported and abnormal.)
anyone knows if V4A works with the G4? and if so, how did you get it to work?
thanks!
Click to expand...
Click to collapse
You need to set kernel to permissive. Selinux switcher apps will correct your issue.

I set to permissive installed v4a of viper and used awesome player instead of nu player. Yet changing eq doesnt do anything

auggie246 said:
I set to permissive installed v4a of viper and used awesome player instead of nu player. Yet changing eq doesnt do anything
Click to expand...
Click to collapse
TUrn off any EQs that you may have on in your music player.
And if you go into the settings menu > Driver status > What do you see here?
After setting to permissive you should get a different message at the bottom when you access V4A compared to when you didn't have it (If you kept note)

Here is a great guide how to make it work: http://forum.xda-developers.com/g4/general/to-root-apps-t3165390/post62107040#post62107040

In addition to the above, I had to force enable V4A and switch to FX compatible mode to get Spotify to work. My other apps worked without those changes.

About gave up for months, then it clicked in my mind when i saw a post mention to make sure all other audio apps redirect eq to viper, and if not, change them. Even if you dont use a certain audio player app, change it too.
Problem is, i could not get the lg music app (which i never use) to change the equalizer to viper, it just had it's own default settings, so i ignored it. So i decided to revisit the lg app, and froze the app with link2sd, i also froze the lg video app too, just in case. Rebooted and now viper sees NEON and i can even run without compatibility mode (which did not work consistantly for me) .
I tried all steps to get this to work, not sure what other things are needed for everyone else, but i tried moving viper to system, installed selinuxmodechanger, maybe this can be uninstalled now, i have no idea. I have no plans to fix what isnt broken and find out myself, so just try freezing lg music app for starters.
Hope it works for you, if so, let the community know what steps you had to do!

Related

viper4android is not working

i am on stock ww_2.20.40.97
1. rooted via one root click tool
2. installed busybox free from goole play, and installed inside busybox
3. downloaded selinuxchanger from xda and changed to permessive
4. downloaded viper4android fx from the resource thread and installed that
5. installed the driver and rebooted
6. allowed viper4android in auto task manager and unchecked in clean up in suspended
7. replaced the audio_policy.conf with the modified audio_policy.conf
8. disabled the equalizer in the stock music app
but the viper4android doesnt work on poweramp.
it very rarely works on stock music app
on play music works only when i force stop the Musicfx task from running app section, but this musicfx task is really an determined task, returns every times after couple of minutes. how do you guys using the viper4android on your phone. i cant seem to work in anyway on poweramp
arka karlos said:
i am on stock ww_2.20.40.97
1. rooted via one root click tool
2. installed busybox free from goole play, and installed inside busybox
3. downloaded selinuxchanger from xda and changed to permessive
4. downloaded viper4android fx from the resource thread and installed that
5. installed the driver and rebooted
6. allowed viper4android in auto task manager and unchecked in clean up in suspended
7. replaced the audio_policy.conf with the modified audio_policy.conf
8. disabled the equalizer in the stock music app
but the viper4android doesnt work on poweramp.
it very rarely works on stock music app
on play music works only when i force stop the Musicfx task from running app section, but this musicfx task is really an determined task, returns every times after couple of minutes. how do you guys using the viper4android on your phone. i cant seem to work in anyway on poweramp
Click to expand...
Click to collapse
it happen on my zenfone too... try to use Dolby if you want.
sandhiwira said:
it happen on my zenfone too... try to use Dolby if you want.
Click to expand...
Click to collapse
i dont think dolby atmos is available for this device
Hi,
Set AudioWizard to Smart Mode, install V4A, install driver, reboot, go to V4A, switch FX Compatibility Mode to compatible, and reboot again. It should work.
Sent from my GT-I9500
I installed viper on my zen2 deluxe with lollipop and it's working only in stock mplayer. i edited audiopolice.conf abd viper4android is not working with neutron player, even in compatible mode. There's a way to fix it?
Pavamarea said:
I installed viper on my zen2 deluxe with lollipop and it's working only in stock mplayer. i edited audiopolice.conf abd viper4android is not working with neutron player, even in compatible mode. There's a way to fix it?
Click to expand...
Click to collapse
yeah i am unable to use viper on neutron and jetaudio maybe because they use own dsp but it works on google play music, poweramp, n7player

Weird problem with stock music player and Viper4Android.

Hey all.
I have a weird problem with Viper4Android and the stock music player. The stock player does what I need it to, so I'd like to continue using it. However, every time I shut it down, Viper stops working. To get Viper working again, I have to run the "Power & Boost" app in the phone, release some memory, then go back into the music player, and open the EQ, then Viper kicks in again. Is there a way to get Viper to stay on? I've tried the Force start in Viper to no avail, and tried in SuperSU to get Viper to start on Audio. Should I set it to system in SuperSU, or is there another method to get it to start up when I use the music app? It's more annoying than anything, because I can get it to work, but it would be nice if it just kicked in. I've updated Viper to the latest using the "Check for Updates" in Viper, and installed the .apk, but nothing has worked so far.
Any suggestions?
Thanks.
So, I've tried a few things, and bricked the phone in the process. Luckily, I was able to sideload the stock firmware back on. What I did was put the V4A app in both the app, and priv-app folders, and the phone bricked. Right now, I have to force stop V4A, then go into the EQ to restart it, before it works. I've used Titanium to freeze MusicEQ, so that's not the problem, and I can't change the permissions on V4A, which is currently installed on the SDCard of the phone.
Okay, so I think I've figured it out on my own. First thing was to delete the stock MusicFX app using Titanium Backup. You could probably freeze it, but I deleted it. Anyways, the problem lied where you disconnect and reconnect the headphones. So, to remedy this, set it to force app on V4A, and set V4A to compatible mode, and reboot the phone. Now, no matter how many times I disconnect the headphones and reconnect them, V4A works right away, without having to go into the Apps setting and force stopping it. Hope that helps someone with similar problems.
Dont use the Stock Music Player's EQ. or disable audio wizard. ( read that somwhere in the forums)

(Solved) Viper4Android audio drivers not Installing?

I got the HTC 10 not too long ago and I have been really happy with the phone. My only complaint is there isn't a good equalizer for it to work on Bluetooth audio devices.
I've been using Viper4Android for a few years now and haven't ran into many problems with it. My issue now is when I try to install the audio drivers, it prompts me the drivers installed successfully and reboot, but when I reboot, it prompts me to install the drivers again and the driver status says it isn't installed. My phone's bootloader is unlocked and properly rooted, has busybox installed and has SuperSU granted for Viper so I really don't know what is causing this problem.
Is there any way to get Viper audio drivers installed or is there a decent alternativeto it that works on the 10?
Have not tried yet with the 10 but maybe you need to change to permissive and I think you also need a kernel that allows permissive. Any that's what I'm used to with the Nexus 5.
Sent from my Nexus 5 using XDA-Developers mobile app
ThatGuy94 said:
I got the HTC 10 not too long ago and I have been really happy with the phone. My only complaint is there isn't a good equalizer for it to work on Bluetooth audio devices.
I've been using Viper4Android for a few years now and haven't ran into many problems with it. My issue now is when I try to install the audio drivers, it prompts me the drivers installed successfully and reboot, but when I reboot, it prompts me to install the drivers again and the driver status says it isn't installed. My phone's bootloader is unlocked and properly rooted, has busybox installed and has SuperSU granted for Viper so I really don't know what is causing this problem.
Is there any way to get Viper audio drivers installed or is there a decent alternativeto it that works on the 10?
Click to expand...
Click to collapse
Flash this. Once flashed,you can replace with current version of Viper located in the priv app folder.
jrock79 said:
Flash this. Once flashed,you can replace with current version of Viper located in the priv app folder.
Click to expand...
Click to collapse
Awesome it works like a charm! It even includes the patch where it allows you to use it even if selinux is set to enforcingso you don't have to get a permissive kernel.
I feel what it boils down to is there is probably some sort writing protection to the system that prevents it from being installed by normal means
ThatGuy94 said:
Awesome it works like a charm! It even includes the patch where it allows you to use it even if selinux is set to enforcingso you don't have to get a permissive kernel.
I feel what it boils down to is there is probably some sort writing protection to the system that prevents it from being installed by normal means
Click to expand...
Click to collapse
How did you end up getting it installed? Selinux set to permissive, still couldn't get it to install so I tried this older version but it hangs and won't load, and I can't find the Priv App folder mentioned.
Sorry if it's not quite related, but, what exactly does the application interface install as "drivers?" I need those files to manually install Viper.

ViPER4ANDROID Working Well?

Has anyone here got ViPER4ANDROID working correctly? For some reason, it's not working so well for me(e.g: sometimes work, sometimes doesn't). I have heard of ViPER4ANDROID MKM, what is it and how is it different from the original V4A?
Thanks for reading this. Would appreciate it if anyone could answer it.
In my n9300 (HK), yes
Hello.
I use the V4A MKM, and it works well.
I think it uses V4A as a base, and somehow changed.
I'm not an expert, so the better is to go to the dev's post and read it.
As I say, it works well for me, but I had to do some creative action.
First I stoped the soundalive and put the folder on my sdcard.
When I flashed the V4A MKM, installed the drivers and reboot it, the information I got was that the drivers had been installed, but it was not processing.
Indeed, I didn't had any output from V4A MKM. The sound was the same as ever.
What I did:
I flashed the V4A for s7 edge. I tried to install the apk, but couldn't.
After that, I opened the V4A MKM apk, every configuration I had done was in order, and It was processing.
Don't know why, but it worked fine.
Hope this will help

Issues with V4A

Good day everyone,
First and foremost, I was not sure about where to post, in the venom thread, Magisk or V4A. Also, did not find any prior posts regarding my issue.
I am running the latest version of version of VenomRom with stock kernel. No mods except some downloaded from the Magisk app.
My issue is that whenever I'm playing music on my phone, the equalizer would randomly (and very often) cut off and the music would go flat and sound horrible, Regardless of if it's speaker or the headphones are plugged in. I've tried many things to fix this but I'm starting to believe it's not me. Any suggestions are appreciated.
Thank you.
Logcat: https://drive.google.com/open?id=0B9yzPXT4RpoKcWFYMjNCQjU1RXM
Ayoodannyx said:
Good day everyone,
First and foremost, I was not sure about where to post, in the venom thread, Magisk or V4A. Also, did not find any prior posts regarding my issue.
I am running the latest version of version of VenomRom with stock kernel. No mods except some downloaded from the Magisk app.
My issue is that whenever I'm playing music on my phone, the equalizer would randomly (and very often) cut off and the music would go flat and sound horrible, Regardless of if it's speaker or the headphones are plugged in. I've tried many things to fix this but I'm starting to believe it's not me. Any suggestions are appreciated.
Thank you.
Logcat: https://drive.google.com/open?id=0B9yzPXT4RpoKcWFYMjNCQjU1RXM
Click to expand...
Click to collapse
You're using the V4A app in the repo, correct? (AKA in the download section of Magisk Manager) The one where you must install the V4A app manually.
Try white listing it from Doze, go into your battery settings and finding the V4A app. You need to pick "Do not optimize" and it should leave it be.
If you have App Systemizer, making the V4A app into a system app may also help.
Alternatively, you could use ViPER-FX which has its own app and puts it directly in the system. If you choose this, make sure NOT to download the version in the OP as it is outdated. Here is the updated one. I personally use this one without issue.
Thats pretty weird. I'm running the current Venom rom and V4A and haven't had any issues.
Maybe try deleting everything and do a fresh install?
Or I think there are some mods you can look into on the Magisk app, maybe try Audio Modification Library?
Thank you for the replies. I actually tried optimizing the app. That didn't work. I started with a fresh install so i'm not interesting in wiping again. I will try installing viper-fx as a system app and report back.
Ariac Konrel said:
You're using the V4A app in the repo, correct? (AKA in the download section of Magisk Manager) The one where you must install the V4A app manually.
Try white listing it from Doze, go into your battery settings and finding the V4A app. You need to pick "Do not optimize" and it should leave it be.
If you have App Systemizer, making the V4A app into a system app may also help.
Alternatively, you could use ViPER-FX which has its own app and puts it directly in the system. If you choose this, make sure NOT to download the version in the OP as it is outdated. Here is the updated one. I personally use this one without issue.
Click to expand...
Click to collapse
Update: so after moving vfx to /system/app/ two days ago, I haven't had any problems with the eq cutting off. Thank you so much for your help. ??

Categories

Resources