Related
I purchased a T-Mobile T999 phone and need to unlock it.
I have tired the 4.1.1 unlock way but do not see the option [4] NW Lock NV Data INITIALLIZ.
I install the base rom for my device 4.1.1 but the radio is staying at UVUEMJC which looks to be a 4.3 radio i think. When I install the 4.1.1 radio baseband just goes to unknown. Can you please let me know how I can install the baseband for 4.1.1 so I can do the unlock.
Thanks
Steven
Stevenr262 said:
I purchased a T-Mobile T999 phone and need to unlock it.
I have tired the 4.1.1 unlock way but do not see the option [4] NW Lock NV Data INITIALLIZ.
I install the base rom for my device 4.1.1 but the radio is staying at UVUEMJC which looks to be a 4.3 radio i think. When I install the 4.1.1 radio baseband just goes to unknown. Can you please let me know how I can install the baseband for 4.1.1 so I can do the unlock.
Thanks
Steven
Click to expand...
Click to collapse
On the Top Level menu there should be something that says EFS Sync. I have yet to get another SIM Card to test, but all reports state that using that option produces the result you are wanting.
Did you try even though the baseband says unknown? Maybe try flashing an older rom too. If you did the full 4.3 update already you might be out of luck.
yes installed the 4.3 full install when i got it from ebay . Looking at getting a 4.0.4 rom just wondering why there is 3 different types for the T999 is there away to figure out which one i should use?
doing the unlock with baseband unknown nothing is on the menu to select.
going to restore my backup modem so that its working again but it will still be locked
thanks for everyones help so far.
Is it possible to Sim unlock 4.4.2? Maybe by flashing a 4.1.1 modem?
blu422 said:
Is it possible to Sim unlock 4.4.2? Maybe by flashing a 4.1.1 modem?
Click to expand...
Click to collapse
Ive flashed over 24 gn2 and s3's through old modems and menu. There's a sticky about it.
blu422 said:
Is it possible to Sim unlock 4.4.2? Maybe by flashing a 4.1.1 modem?
Click to expand...
Click to collapse
By Sim unlock, do you mean you want to use an AT&T phone on another carrier? If that's what you are looking for, give me a few minutes to test something.
creepyncrawly said:
By Sim unlock, do you mean you want to use an AT&T phone on another carrier? If that's what you are looking for, give me a few minutes to test something.
Click to expand...
Click to collapse
Isn't that what a sim unlock is? Correct me if I have it wrong.
emeianoite said:
Isn't that what a sim unlock is? Correct me if I have it wrong.
Click to expand...
Click to collapse
Yes, of course.
But I am fairly new to the note 2 so I don't have much stored up information. I now see a post that indicates that flashing a certain 4.1.1 modem, MJ2 I think, gives the user a service menu where you can change the unlock setting. So now the OP's question makes sense. Only he should have been able to find the same post I did.
In a minute, as soon as my wife lets me borrow her phone, I'm going to test an unlock tool I know about to see if it works on 4.4.2 stock.
creepyncrawly said:
Yes, of course.
But I am fairly new to the note 2 so I don't have much stored up information. I now see a post that indicates that flashing a certain 4.1.1 modem, MJ2 I think, gives the user a service menu where you can change the unlock setting. So now the OP's question makes sense. Only he should have been able to find the same post I did.
In a minute, as soon as my wife lets me borrow her phone, I'm going to test an unlock tool I know about to see if it works on 4.4.2 stock.
Click to expand...
Click to collapse
Yes, but that's for 4.1.2 idk if it will work with 4.4.2 I just don't wanna accidentally ruin my phone. And I think you mean LJ2 not MJ2 and thanks that'd be great if you could keep me posted
emeianoite said:
Ive flashed over 24 gn2 and s3's through old modems and menu. There's a sticky about it.
Click to expand...
Click to collapse
Were any of them on 4.4.2?
blu422 said:
Were any of them on 4.4.2?
Click to expand...
Click to collapse
The dialer codes that worked on 4.1.1 to unlock the phone via the hidden menu. Does not work on 4.4.2 anymore. And being you took the ota update, there's no way of downgrading you firmware...
Sorry to tell you..
Another way is to contact AT&T by email, about unlocking the phone. Can't remember what the exact name is, but goggle search it. They'll send you the SIM code, if the phone is out of contact!!! Takes about 2-3 days when I did my skyrocket to run on TMO.
Just my 2¢®™
Sent from my T889 N2/N3/S5..
At one time, there was a free app on XDA called GalaxSim Unlock. For some reason, the developer pulled the free app download, and the only version then available was the paid version on Play. I have a copy of the free one from before it was pulled, and it works on the Captivate and the Galaxy S II, and some other galaxy phones, not sure which ones. So I tried it tonight on my wife's Note 2 which is running Stock NE5 with TWRP recovery and has the MC3 boot loader. However, the unlock failed, saying unable to read nvdata. So it's apparently a no go on this phone.
Bajanman said:
The dialer codes that worked on 4.1.1 to unlock the phone via the hidden menu. Does not work on 4.4.2 anymore. And being you took the ota update, there's no way of downgrading you firmware...
Sorry to tell you..
Another way is to contact AT&T by email, about unlocking the phone. Can't remember what the exact name is, but goggle search it. They'll send you the SIM code, if the phone is out of contact!!! Takes about 2-3 days when I did my skyrocket to run on TMO.
Just my 2¢®™
Sent from my T889 N2/N3/S5..
Click to expand...
Click to collapse
That only works if the contract the phone was in was not defaulted, and or you are the original owner of the phone.
re: sim unlock
I recently bought a soft bricked SGH-I317 (stuck on "firmware upgrade encountered and issue"). I tried flashing LJ2 firmware and got it to change to being hung on the "Samsung Note II" logo. I think this is when it changed as I was trying all sorts of flashing trying to get off the "firmware upgrade encountered an issue" screen (also Kies would not recognize that the phone was connected). Tried different recoveries and firmware without making any progress until I flashed the 4.4.2 (I317UCUCNE5) bootloader. The phone booted into Philz recovery after that. I then flashed the stock LJ2 firmware w/ LJ2 modem, sim unlocked the phone and then flashed Skynote Air 4.3 along with the 4.4.2 (NE5) modem. This is the setup that I am using on T-Mobile now with no problems except that the Knox counter is tripped. Hope this helps shed some light on the problem.
I discovered a problem with Skynote 4.3 with the 4.4.2 bootloader. If I try to charge it with the phone turned off, the phone will freeze at the empty battery symbol and requires a battery pull to get the phone to turn on. Everything else seems to work okay.
jsdad said:
I recently bought a soft bricked SGH-I317 (stuck on "firmware upgrade encountered and issue"). I tried flashing LJ2 firmware and got it to change to being hung on the "Samsung Note II" logo. I think this is when it changed as I was trying all sorts of flashing trying to get off the "firmware upgrade encountered an issue" screen (also Kies would not recognize that the phone was connected). Tried different recoveries and firmware without making any progress until I flashed the 4.4.2 (I317UCUCNE5) bootloader. The phone booted into Philz recovery after that. I then flashed the stock LJ2 firmware w/ LJ2 modem, sim unlocked the phone and then flashed Skynote Air 4.3 along with the 4.4.2 (NE5) modem. This is the setup that I am using on T-Mobile now with no problems except that the Knox counter is tripped. Hope this helps shed some light on the problem.
I discovered a problem with Skynote 4.3 with the 4.4.2 bootloader. If I try to charge it with the phone turned off, the phone will freeze at the empty battery symbol and requires a battery pull to get the phone to turn on. Everything else seems to work okay.
Click to expand...
Click to collapse
My sister sell her note 2 to me because she's gonna upgrade to samsung galaxy S5. It was an att and I'm using T-mobile.
I did check the baseband ver and It was i317UCUCNE5 (4.4.2 OTA). the question is it is safe to flash base band ver i317UCALJ2 using ODIN?
Can you do the step by step process and also links of the files and software did you use please? thanks
emeianoite said:
Isn't that what a sim unlock is? Correct me if I have it wrong.
Click to expand...
Click to collapse
It's a network unlock, so you are free to use any GSM carrier. You can lock your sim card -- then a pin is required for your phone to connect to your carrier. It's the old skool method to stop unauthorized use, from the days before a lock screen pin.
I bought a SGH-I317M today off someone. It was locked to Bell Canada. I did the dumb thing by letting Kies update the firmware. And as i've read I'm pretty screwed for downgrading it. I tried unlocking it but the hidden menu didn't give me the 4th option in the network lock path. So i tried bunch of things which at one point required me installing Kies for drivers and thats when I i let it slip and update. So now I'm still searching for a method to unlock my phone. I've gotten philstouch recovery on and Skynote working. I just tried flashing the rogers_j2 modem.. hoping this will work.. you think I should just pay one of those sites or a retailer for the sim unlock ccode?
trunks10k said:
I bought a SGH-I317M today off someone. It was locked to Bell Canada. I did the dumb thing by letting Kies update the firmware. And as i've read I'm pretty screwed for downgrading it. I tried unlocking it but the hidden menu didn't give me the 4th option in the network lock path. So i tried bunch of things which at one point required me installing Kies for drivers and thats when I i let it slip and update. So now I'm still searching for a method to unlock my phone. I've gotten philstouch recovery on and Skynote working. I just tried flashing the rogers_j2 modem.. hoping this will work.. you think I should just pay one of those sites or a retailer for the sim unlock ccode?
Click to expand...
Click to collapse
Please let me know if it works. mine is galaxy note 2 4.4.2 NE5 baseband and I've done some research and they said that if you upload your firmware thru OTA there is a possibility that it will soft brick you phone due to unknown security reason.
I'm just waiting for conformation from some one that it's safe to flash J2 modem on a NE5 OTA
in the US, if your phone is more than 6 months old and your contract is in good standing you can ask for the unlock code. I don't know if Canada is similar.
I was going to post the same question about unlocking I317 4.4.2, and found this post which is similar to what I'm looking for so just want to add to pump the question.
It's been a while but I have done unlocking for other At&t models (S3, S4) and learned that later versions don't with the option in hidden menu to unlock, and the work around is to downgrade. However with devices that have OTA updates, it's not possible to downgrade the bootloader.
Is this the same for Note 2 I317? If so, any other method available to unlock this device to use it on other GSM networks? (I just bought one and it's on Kitkat 4.4.2 UCUCNE5, and looking for unlock...)
It's only the modem that needs to be flashed. So whatever bootloader you're on doesn't matter.
I wanted to unlock my phone today. ATT website wouldn't let me do it until my contract was fufilled, so I did some web searching.
Started with 4.4.2 and NE5 baseband. Loaded original baseband via recovery, and used the debug menu to unlock the sim. After that, updated the baseband back to the latest. Tmobile sim seems to be working just fine.
dmrfresh said:
I wanted to unlock my phone today. ATT website wouldn't let me do it until my contract was fufilled, so I did some web searching.
Started with 4.4.2 and NE5 baseband. Loaded original baseband via recovery, and used the debug menu to unlock the sim. After that, updated the baseband back to the latest. Tmobile sim seems to be working just fine.
Click to expand...
Click to collapse
What bootloader were u on?
Sent from the TermiNOTEr 2! ?
I buy my new phone about month ago,i had 4.3 JB firmware,and then i update to 4.4.2,then i seen a problem i can't call someone,i can't use mobile internet,i can't receive a messages or a calls,i tried to downgrade again to 4.3,same problem,i tried to insert other sim card,i tried everything and nothing works,my Wi-Fi works but not Sim-Card,It says "Not Registered on Network"
bump
bump please help
Does the phone show the correct imei? Could the phone be blacklisted? Model in download mode is n7100? How did you update to 4.4.2?
Download and install MobileOdin, copy stock 4.3 on your device then install ROM from device.
tin2404 said:
Download and install MobileOdin, copy stock 4.3 on your device then install ROM from device.
Click to expand...
Click to collapse
Uradio sam to,idalje isti problem
audit13 said:
Does the phone show the correct imei? Could the phone be blacklisted? Model in download mode is n7100? How did you update to 4.4.2?
Click to expand...
Click to collapse
I know nothing about IMEI,i update it with Odin.
If the phone does not have the correct imei #, it will not connect to a carrier network.
check your IMEI by typing in the dialing screen *#06# and see if its start at 0499 or its on Null/Invalid
i had a similar problem which i updated from 4.1.2 to 4.2.2
the IMEI was correct but it still was stuck on emergency call only
i found this modem file which helped me.
i tried flashing all kind of roms with this modem but it was pointless..
until i tried flashing that Omega v4.2.2 rom and then flashed the modem again
and it actually worked..no clue how did it work on the Omega and not for the others but oh well..
now im on CyanogenMod 5.1.1 and the phone is fully working.
If you planning on doing something like that (messing with your phone rom and such..) dont forget to make a FULL backup.
kapac7a said:
I buy my new phone about month ago,i had 4.3 JB firmware,and then i update to 4.4.2,then i seen a problem i can't call someone,i can't use mobile internet,i can't receive a messages or a calls,i tried to downgrade again to 4.3,same problem,i tried to insert other sim card,i tried everything and nothing works,my Wi-Fi works but not Sim-Card,It says "Not Registered on Network"
Click to expand...
Click to collapse
I had similar problem and worked fine..download 4.3 or 4.4.2 from Sammobile stock XEO Poland or XEF France ROM. They have modem we in Croatia use. Problem is not in ROM then in your modem or your device is locked on one carier but you have wrong different carier SIM.
Or just look here for modems then flash it with Odin but over computer.In ODIN check "nand erase all".
Of course you need to wipe everything ,flash ROM then flash modem separatly but it MUST BE XEO or XEF modem !
Hello everybody,
I have bricked my device once (SGH-I747 AT&T) by flashing wrong bootloader to my phone (It's a very noobish mistake, I know) and I had to pay someone to unbrick it by using a J-Tag but this person told me he was "unable to install SGH-i747 bootloaders" and now I'm unable to use LTE because I have a Non-LTE bootloader and modem. I've tried flashing T999L modems but no SIM card/IMEI recognized so I had to go back to T999 modem. The questions are:
Can I Odin flash SGH-I747 bootloader I747UCUEMJ2 without bricking my phone?
My phone is unlocked to use with any operator, will it remain unlocked after this?
My IMEI will be ok after this?
My phone information is:
Baseband: T999UVUEMJC
Bootloader: T999UVUEMJC
Android Version: Lineage 7.0.1
RIL Version: 3.0
Thanks in advance.
I have never heard of anyone being able to flash a T999 bootloader onto an i747.
Did the phone come from AT&T? Did the phone have the AT&T boot screen?
Did you verify the phone's model # in download mode before bricking?
audit13 said:
I have never heard of anyone being able to flash a T999 bootloader onto an i747.
Did the phone come from AT&T? Did the phone have the AT&T boot screen?
Did you verify the phone's model # in download mode before bricking?
Click to expand...
Click to collapse
Thanks for your answer.
Yes, the phone was AT&T, it also says SGH-i747 behind the battery and it was I747 model on settings. It had a 4.1 custom rom when my brother gave it to me. I tried to upgrade it to 4.3 but I didn't know about bootloader stuff and tried to flash a bootloader using twrp so I've bricked the phone. The only way to unbrick it was with j-tag and the person who did this told me he was able to do so with T999 firmwares so now I have a T999 no-lte phone. Would it be risky to change it back with Odin to I747 bootloader and modem? Is there any safe way to do this?
Thanks again.
You can't cross-flash bootloaders with Odin, TWRP, or CWM without the possibility of -rebricking.
Does the IMEI in the phone (dial *#06#) match the imei on the label under the battery?
I'm very surprised that the phone's bootloader had to be cross-flashed. Where did you get the bootloader that you flashed?
audit13 said:
You can't cross-flash bootloaders with Odin, TWRP, or CWM without the possibility of -rebricking.
Does the IMEI in the phone (dial *#06#) match the imei on the label under the battery?
I'm very surprised that the phone's bootloader had to be cross-flashed. Where did you get the bootloader that you flashed?
Click to expand...
Click to collapse
Yes, the IMEI matches. I do not remember where I got that bricker bootloader, neither the installed one (as it was not flashed by me). I can remember that when I received the phone after unbrick, it was SIM locked so I had to give the phone again to this person to fix the SIM-Lock. As far as I know, AT & T I747 is unlocked, so my phone totally became T999.
Any safe way to try this? Or will I be using T999 forever?
Thanks again.
Boot into download mode and confirm that the model # is sgh-t999. If it is, you're stuck.
I've readed that full back to stock might help but it's nearly the same process of flashing everything so I'm not sure...
audit13 said:
Boot into download mode and confirm that the model # is sgh-t999. If it is, you're stuck.
Click to expand...
Click to collapse
It says T999 all the way lol. I think I'm stuck.
Thanks buddy.
Sorry, you are stuck with T-mobile ROMs.
Your post is the first oneI have seen where an AT&T s3 has been transformed via jtag into a T999.
audit13 said:
Sorry, you are stuck with T-mobile ROMs.
Your post is the first oneI have seen where an AT&T s3 has been transformed via jtag into a T999.
Click to expand...
Click to collapse
As this is an old device, I will try to flash it back to SGH-I747 bootloader before buying another phone. If succeed or not I will tell you the results here. Meanwhile, I'll be enjoying my T999 :silly:
Thanks.
i have an i747m phone on rogers network (locked). it is still on original firmware version, although it is rooted.
i recently flashed lineageos.
since then the sim card is not recognised (no network). i am unsure what the issue IS, but i have been further educating myself for the last four days on this topic and am still unclear on some things. i wonder if you could answer some questions and give a bit of guidance.
here's what i know:
===============
made nandroid backup before upgrading to lineageos
phone worked fine before the update to lineageos
android version was 4.0.4
the bootloader and modem has not to my knowledge been changed since purchase -- i am the original owner.
the phone was rooted shortly after purchase by me
baseband is I747MVLLE8
bootloader is i747MVLALE8
os is now lineageos 14.1-20170828-nightly-d2att
### i can receive calls. phone does not ring, but there is visual notification and i can answer and talk.
### (update) i reinstalled lineageos and now incoming DOES ring. on the screen it says "incoming call via emergency network". i do not see any way to answer the call now, and even after hanging up the initiating call it continues to ring until reboot.
### (update2) i have been able to answer the "incoming call via emergency network" and it seems to connect normally. is this a glitch, or are "incoming emergency calls" a "thing"?
===============
i read that one of the likely reasons is "out of date baseband/modem/bootloader"
here's what i am unsure of:
===============
probable cause of "no sim"
should i upgrade bootloader? if so to what version and how?
should i upgrade modem? if so to what version and how?
anything else that should be updated?
what does "d2att" stand for and represent? is it part of the hardware/model of the phone? e.g. what is the difference between d2att and d2can?
is d2att the correct "thing" for the rogers network in canada for an i747m?
can i use heimdall and the images from sammobile.com to upgrade ONLY the modem and/or bootloader? if so, what files do i use (which one's are which?)?
if i use heimdall to flash the WHOLE sammobile "firmware" what happens? do i need to flash them all incrementally (v4.1, v4.2, v4.3 etc), or can i go from 4.0.4 straight to 4.4.2?
what is the minimum baseband/modem/bootloader that will work with lineageos 14.1 (android 7?)?
what are the drawbacks associated with upgrading the baseband/modem/firmware?
should i flash an older baseband first and try to unlock my sim or is that problematic in other ways?
===============
i am tech savvy and can follow complex instructions. i am not afraid of SOFT bricks as long as there is some way for me to revert. what IS holding me up is the fact that there are no clear directions (that i could find so far) for doing what i am trying to do, no clear indications of what the dangers are (that i could find so far), and (seemingly) conflicting information abounds. i understand (more than ever now) that this is a very complex topic and everything in this realm is unofficial. i would be very grateful if you could bring me up to speed on this topic a bit more, help me to understand things in more depth.
my goal is to update the phone the the newest lineageos (if that is possible and recommended), and to have full functionality. IF lineageos 14.1 is not to my liking, being able to revert to SOMETHING else would be great!
thanks so much!
The phone needs to be running the latest bootloader and modem to run the latest Lineage.
d2att is the moniker for the AT&T s3. The d2can is the Canadian version used by Canadian carriers other than Wind/Freedom, Videotron, and Shaw. The d2lte is the international version of the s3, although the d2att and d2lte ROMs may work on the d2can.
audit13 said:
The phone needs to be running the latest bootloader and modem to run the latest Lineage.
Click to expand...
Click to collapse
ok great to know!
do you know if i can update just the bootloader and modem and if so how? i have the file
I747MVLUFOB3_I747MOYAFOB3_RWC.zip
from sammobile.com (for the i747m rogers) which contains around ten files. which one is the bootloader and which one the modem (or does it work like that?)? there is a post here
ohthehugemanatee <dot> org/blog/2015/04/04/how-and-why-to-update-the-modem-slash-baseband-firmware-on-a-samsung-phone/
that talks about the theory (if not the exact practice for my exact phone) of how to do it. can you verify this would work as demonstrated using heimdall?
is it advised to do any of this with a locked sim? i am on the rogers network and would be flashing files/firmware (presumably) for the rogers network.
audit13 said:
d2att is the moniker for the AT&T s3. The d2can is the Canadian version used by Canadian carriers other than Wind/Freedom, Videotron, and Shaw. The d2lte is the international version of the s3, although the d2att and d2lte ROMs may work on the d2can.
Click to expand...
Click to collapse
since you did not list rogers there does that mean that i would have the d2can then? i used the d2att version of TWRP (as well as lineageos) -- do you think that is going to cause problems?
thanks very much for your reply!
Rogers, Telus, and Bell s3 are the d2can.
You unzip the file from sammobile.com only once to get a tar.md5 file that you flash in the pda/ap slot of Odin. Sim card is not required to be in the phone when flashing.
Using twrp and lineage for the d2att shouldn't be an issue since the att version of the s3 uses the same hardware as the Rogers s3.
audit13 said:
Rogers, Telus, and Bell s3 are the d2can.
You unzip the file from sammobile.com only once to get a tar.md5 file that you flash in the pda/ap slot of Odin. Sim card is not required to be in the phone when flashing.
Using twrp and lineage for the d2att shouldn't be an issue since the att version of the s3 uses the same hardware as the Rogers s3.
Click to expand...
Click to collapse
cool ok.
do you think i can go straight from 4.0.4 firmware to 4.4.2 (latest i think?)? is it recommended?
It should be no problem to flash the 4.4.2 stock rom over the existing 4.0x ROM.
Is the phone network unlocked? If not, flash the stock 4.1.1 ROM and use the free method to network unlock the phone. The unlock will be permanent.
audit13 said:
It should be no problem to flash the 4.4.2 stock rom over the existing 4.0x ROM.
Is the phone network unlocked? If not, flash the stock 4.1.1 ROM and use the free method to network unlock the phone. The unlock will be permanent.
Click to expand...
Click to collapse
cool. couple of questions:
1/ do i need to use a sim from a network other than my own (rogers) in order to complete the free unlock? many of the "free unlock" tutorials mention inserting "the new sim" in order to do the unlock.
2/ will this image (rogers 4.1.1) work for getting me the free unlock or do i have to use a pristine one?
https://forum.xda-developers.com/showthread.php?t=1739426
the reason i ask is that sammobile seems to require a premium account to get that older 4.1.1 image.
cheers!
You don't need a SIM card from another carrier to unlock on 4.1.1 but you need a SIM from another carrier to verify that the phone is unlocked.
Try updato.com for a stock Canadian 4.1.1 rom
https://forum.xda-developers.com/showthread.php?t=2529200
Don't flash beyond 4.1.1 until the phone is sim unlocked.
audit13 said:
You don't need a SIM card from another carrier to unlock on 4.1.1 but you need a SIM from another carrier to verify that the phone is unlocked.
Try updato.com for a stock Canadian 4.1.1 rom
https://forum.xda-developers.com/showthread.php?t=2529200
Don't flash beyond 4.1.1 until the phone is sim unlocked.
Click to expand...
Click to collapse
when i search for "i747m" on updato.com, the only 4.1.1 firmware they list is
GALAXY S III (Canada) SGH-I747M 4.1.1 December 21, 12 Puerto Rico (PCT) I747MUMBLL1
is that one suitable, being "region/carrier = puerto rico" or do i NEED rogers carrier?
Is your phone still locked to Rogers?
audit13 said:
Is your phone still locked to Rogers?
Click to expand...
Click to collapse
i have not tried the unlock yet (because of the carrier/region question) but yes i believe it is locked to rogers.
i guess i don't really understand what the differences are on my phone -- what they are for.
i believe that the i747 is a different hardware than i474m.
but i don't know if d2att is different HARDWARE than d2can for example.
and the "rogers" part, vs "telus" or "sprint" or whatever. i am guessing that that signifies the PROGRAMMING in the OS or perhaps the FIRMWARE as well -- but not the hardware... but i could be wrong.
when i "unlock" the phone from rogers network, when i dial the "special number," do i need a network connection or is that number something internal to the phone (no rogers network (or any other) needed)? in other words, can i "unlock" my rogers locked phone using the non-rogers firmware upgrade 4.1.1 ?
The hardware for the ATT s3 (d2att) and Rogers/Telus/Bell s3 (d2can) is identical except the US version uses different boot loaders and modem from the Canadian version.
The Sprint and Verizon versions of the s3 are CDMA, not GSM like the ATT and Rogers version.
Neither a network connection, SIM card, or SD card is not needed to use the menu method to unlock the phone. You will need a non-Rogers SIM card to test the phone after it is unlocked. Do not upgrade beyond 4.1.1 until the phone is network unlocked. Upgrading beyond stock 4.1.1 will permanently lock you out of the dialler unlock menu and you will have to buy an unlock code if you want to network unlock the phone.
You can use any 4.1.1 stock ROM from Bell, Telus, Koodo, Rogers, or Fido to access the dialler unlock menu.
Use Odin 3.07 and the original Samsung USB cable to flash the ROM in the PDA slot of Odin.
Make sure you have a backup of your data as things can go wrong during any flash process that may cause you to lose your data.
All of the information I have provided is something that I have personally done. I can provide no guarantee that you won't encounter a problem or brick your phone. Proceed at your own risk.
Any updates?
audit13 said:
Any updates?
Click to expand...
Click to collapse
yes i have updates! i finally got around to doing this today and...
i updated to 4.1.1 bell stock that you suggested. i used heimdall to do the flash instead of odin using this guide:
https://forum.xda-developers.com/wiki/Heimdall
other than that i followed your advice to the T
success.
i then did the menu unlock procedure (a few times). i don't know if it worked or not because i am unable to test with a different network sim yet.
i then went to version 4.4.2 from sammobile using heimdall again -- all went well.
i then installed the (for me) non-working lineageos from last week and it now works -- i assume due to the upgraded baseband you suggested. i am able to make and receive calls as normal now.
i then updated to lineageos 14.1 20170904 with gapps nano. and i can report that all is working extremely well.
thank you so much audit13 for working this through with me. i have learned a ton of new stuff, and not a single brick.
thanks again!
That's great news. Thanks for the update.
We're all here to help and learn