cube iwork 8 3g dual boot . win8.1 blackscreen issue - Windows 8 Development and Hacking

hello everybody
as i mention it
i got recently cube iwork8 3g dual boot (android+win8.1) it was working ok and everything was going fine
but the windows asked me to restart so it can apply a certain updates . then when it finished installing the
updates and restarts , i logged in and i found black screen desktop and no icons or even start menu !!!
like this pic attached and the only thing i can do is using the task manger to run other apps
so please please help me i dont know what to do please tell me

Hi there
Try to boot up in safe mode and disable the fast boot option via control panel -> power options.

Related

How can i load windows without activsync?

Hi all after upgrading to win 2k5 my device worked for 6 hr and while installing software it hanged resting didnt open it i cant get it to connect to activ sync is there a way to get windows agine on this device please advice
regards
Do a hard reset, it will solve your problems
nothing works no hard reset nothing is working it stand on the colored window nothig else i cant even get the boot lodar screen only the 4 colores screen and the blue tooth led working and the phone is working but no rings isnt there a way i can flash with sd card like in wallaby please help me
try doing a soft reset "power+reset" then right afterwards press "record+camera".. use the record and camera to set the bottom two options to yes and press your mail button.. maybe this will get it going again.. if not do the normal 05 bootloader "power+record+camera+reset" and dock it and hopefully you will see the USB and can reflash it again or back to 2k3
THx a lot Black6spdZ it's working now :lol:
what fixed it?
i just did as you told me (try doing a soft reset "power+reset" then right afterwards press "record+camera".. use the record and camera to set the bottom two options to yes and press your mail button.. ) then the windows opend correctly and i could get it connected to active sync i instaled another ver. of windows TuMa_v1.4 but the camera didnt work i'm looking now for a way to make it work if u can help me
PS i recive this message each time i rest the device (the file camera_Detect cannot be opend. either its not sined ....)
are you flashing an ext rom with the main rom? If not it may be trying to load the old 2k3 ext rom programs on top of your newly installed 05 main rom. if that is your only problem look with the files that came with the 05 zip, I believe there is a compatible Camera app included with it that you can load and should hopefully overwrite the older version. You can keep that message from appearing by going into your Windows/Startup folder and deleting the camera detect startup program until you get the new camera app loaded. What I did was use the ext rom tools to unlock and then format the ext rom so that there were no programs on it. From then on I only flash the main rom when needed and load just the programs that I need to keep it nice and fast. Hope this info gets you going.
yah this is a good information now it's working fine thx a lot :lol: i found the application on the ext rom htc one and everything is gr8

Phone won't start up ?

Here's the thing , I unlocked my bootloader and rooted my phone a while back (probably using an already outdated software , if i remembered correctly it was 2.3.3 , but i knew i followed the instructions here
http://forum.xda-developers.com/showthread.php?t=1133650)
Today, my phone asked if I wanted to update the software (like an automated software update) and i could choose to update or not and i chose yes but now , my phone won't start up for like 3 hours already . I tried turning it on but it won't turn on , i tried charging it but there isn't any lights which was supposed to be there .
So I decided to google it and i followed the instructions here
http://talk.sonyericsson.com/thread/26720
but after installing both , choosing my phone , followin the instructions on update service , it gets stuck on "it contains a modified software that cannot be updated" so decided to come back here to ask you guys what I should do .
Right now , all I want to do is for my phone to start up again , any ideas ?
edit : right now , i took out the battery , and put it back in . This time when I tried to turn it on , the vibrate is there which wasn't there initially and theres 1 flash of the green light on the side of the phone .
and also , i think its recognized by the computer because i can hear the sound notification (the same sound when you plug a USB into a computer) which wasn't there before I did the update service thingy .
edit 2 : it won't go into safemode either when i tried clicked the right and left buttons below the display (the menu and back button) and the power button after that . yes i tried reinserting the battery .
edit 3 : I'm not sure if this'll help but my phone is recognized as SEMC flash device (i checked on device manager) and theres a green colour non flashing light when i plug my phone into the pc .
http://forum.xda-developers.com/showthread.php?t=1304634
OMG
Thanks
Sorry for not searching , I tried looking for Xperia arc won't load up / start up but it didn't give me this thread .
Thanks again
edit : i thanked you too
same problem!!!
Guys, I was trying to modify my phone so that applications would be saved in memory card instead of internal storage, so I rooted it and stuff.. Now it won't turn on!!! When I switch it on, it shows the SE logo and does nothing else.. I tried to enter the safemode menu (holding left and right keys when switching on, or volume down key and home key when turning on) but nothing works!!! I'm like desperate now so any help would be really appreciated!
gadjet87 said:
Guys, I was trying to modify my phone so that applications would be saved in memory card instead of internal storage, so I rooted it and stuff.. Now it won't turn on!!! When I switch it on, it shows the SE logo and does nothing else.. I tried to enter the safemode menu (holding left and right keys when switching on, or volume down key and home key when turning on) but nothing works!!! I'm like desperate now so any help would be really appreciated!
Click to expand...
Click to collapse
Try to flash a new(er) kernel with recovery and install a new rom (your phone is ota-bricked, so if that doesn't work, search on XDA)
Sent from my LT18i using xda premium

AOSON M71G or LYXF LY-F8HD or Elijah M71G or Turbo-X CallTab II (Plaisio.gr)

As I had some users asking on this Chinese tablet with 4 known variants at least , decided to have this thread opened.
Please do your research and be specific on your ques so we can help as much as we can!
Tx in advance for your respect to XDA Forums!:good:
General:
FLASH MODE & SAFE MODE
If you boot by pressing VOL - all the way during the boot it goes to SAFE MODE (like windows will show at bottom left corner instead SAFE MODE)
To enter the ROM FLASH mode you need:
- Enable USB Debugging in your {Developer Option}
- TURN OFF fully the tab!
- Connect mini USB cable to your laptop/pc and open Device manager! (If you have Win 8 please note that your tablet driver wont be installed in flash mode OR any other unassigned drivers - you need to restart your win 8 by entering the advanced restart mode and F7 option to allow the unassigned drivers )
- Once off: Press and keep pressed the VOL + , while pressed put the usb cable. Then press POWER button in1 sec increments.
IF DONE IN ORDER you should see after the 5th (about) POWER button press, the device will show up in you device manager and your AOSON M71G or LYXF LY-F8HD or Elijah M71G or Turbo-X CallTab II (all the same), will have just a BLACK SCREEN!
Now you are in FLASH ROM mode!
You can use: LiveSuitPack_version_1.09 to flash your new stock or custom ROM. AOSON has out (split in two zip files - in dowload section) a new better 3G support 4.2 ROM
To root your tablet or any tab I recommend a simple chinese app SHUAME Get it on first page!
Install is all Chinese but all you need is the Android SDK USB drivers (manual install in device manager) and then open SHUAME, go to 4th tab, and click on the second row the icon with ANDROID # .
After some reboots you will be rooted and after reboob you will see pop ups on your screen asking for apps asking root permission.
You tab is simply rooted and you can use adb to add CWM etc. or shuame to flash your CWM img file. (Option next to root option as per above)
Official ROM, AOSON:
The files you need are:
Part #1
Part #2
INFO:
These tab only lucks GPS! it can support almost everything! from full HD playback to EMUs and more!
And the 3G/WCMDA works fine out of the box!
For those not aware or been troubled. Its better to insert the SIM while tab is off and boot up.
Then from settings just enable/disable the mobile data! If you insert while on it might take some time to take the signal and APN settings, or just reboot or turn on/off AIRPLANE mode to give it a help!
HOW TO OPEN:
Remove the two small screws at the bottom, one visible and one hidden under warranty/manufacturer sticker!
With a very thin screwdriver POP the screen up by pushing the plastic backwards! Once done you will notice that you did a good thing not to try to pop the white back cover! Its screwed in 6 places to the black surounding bezel of the screen!
Thanks!
I successfully flash my Aoson M71G in new Firmware!! Thank you for your help... I have a little skills in making a custom rom and some tweaks in system.. We needed to search some friends to help us developing our tablet!!
I have M71G but it is has pattern ANDROID lock. I cant Upgrade the it since i cant access the menu to enable USB Debugging. It always fails to upgrade.. How to Hard reset it ? !!
plz give me aoson m71g tab original firmware link plzzz
darjosh012 said:
I successfully flash my Aoson M71G in new Firmware!! Thank you for your help... I have a little skills in making a custom rom and some tweaks in system.. We needed to search some friends to help us developing our tablet!!
Click to expand...
Click to collapse

HTC Desire 820 dual sim freeze

So my problem is that i wanted to root the phone of my friends all was good but a day he tell me that his phone boot but an error appeared all the time "htc sense input" stopped working and the phone crash...
So i flashed a custom rom and when i boot all is good but in the middle of the boot img or the optimizing applications it freeze and restart help me !
EDIT : So i'm not stressed anymore just disconnect the battery and reconnect it and it will function really good but another problème when i have a dialog box like alloow RSA identification or Something for Google my phones crash sometimes anyone have the solution ?

How do I clear cache on cm84 dvp v2.1 which looping because of Android upgrade

Hello guys I hope you can help me. I have a car GPS (Unfortunately I am not allowed to publish links here but is a regular chinnese dash cam with GPS). It comes with a "board" cm84 dvp v2.1. It was working fine until one day I turned it off without knowing it was doing an Android upgrade on the back and after that it started looping while boot. So it shows the splash screen then it says that Android is upgrading - Upgrade 1 of 1 and then it just restart again. My guess is that part of the upgrades files were stored in cache and they now don't allow the GPS to boot. I know normally entering the Recovery boot via Down volume + power button I can clear cahe and even factory reset it, but the thing with this device is that it doesn't have any volume button, the only button it has is the power one so I have no idea how to access that option. Does anyone know how I can do that? Also, just in case, when I plug the device via USB to my Windows 10 laptop I see 2 units (D: and F on device manager but not on Windows Explorer.... in case there is no way to access the recovery boot because of not having a down volume button... is there any way I can just delete the cache folder content from Windows using any software? Thanks a lot in advance for any hand you can give me. I tried Coolmuster Android Eraser which detects an Unknown Android device but asks it to configure it to accept USB debugging which clearly I can't do.
Any solution?
Hello,
I am facing same issue with my device. Did you manage to find any solution to this problem.

Categories

Resources