Hi all after upgrading to win 2k5 my device worked for 6 hr and while installing software it hanged resting didnt open it i cant get it to connect to activ sync is there a way to get windows agine on this device please advice
regards
Do a hard reset, it will solve your problems
nothing works no hard reset nothing is working it stand on the colored window nothig else i cant even get the boot lodar screen only the 4 colores screen and the blue tooth led working and the phone is working but no rings isnt there a way i can flash with sd card like in wallaby please help me
try doing a soft reset "power+reset" then right afterwards press "record+camera".. use the record and camera to set the bottom two options to yes and press your mail button.. maybe this will get it going again.. if not do the normal 05 bootloader "power+record+camera+reset" and dock it and hopefully you will see the USB and can reflash it again or back to 2k3
THx a lot Black6spdZ it's working now :lol:
what fixed it?
i just did as you told me (try doing a soft reset "power+reset" then right afterwards press "record+camera".. use the record and camera to set the bottom two options to yes and press your mail button.. ) then the windows opend correctly and i could get it connected to active sync i instaled another ver. of windows TuMa_v1.4 but the camera didnt work i'm looking now for a way to make it work if u can help me
PS i recive this message each time i rest the device (the file camera_Detect cannot be opend. either its not sined ....)
are you flashing an ext rom with the main rom? If not it may be trying to load the old 2k3 ext rom programs on top of your newly installed 05 main rom. if that is your only problem look with the files that came with the 05 zip, I believe there is a compatible Camera app included with it that you can load and should hopefully overwrite the older version. You can keep that message from appearing by going into your Windows/Startup folder and deleting the camera detect startup program until you get the new camera app loaded. What I did was use the ext rom tools to unlock and then format the ext rom so that there were no programs on it. From then on I only flash the main rom when needed and load just the programs that I need to keep it nice and fast. Hope this info gets you going.
yah this is a good information now it's working fine thx a lot :lol: i found the application on the ext rom htc one and everything is gr8
Related
Before 1 month my UNIVERSAL stuck on boot screen and like every one I'll start to test everything - including TASK 28 command to return him back but without succsess. Before 2 days some one put a thread about formating DOC and I remembered that I was try to format my DOC and after few weeks my Universal was stuck so MAMAICH wrote this:
mamaich said:
if you can enter bootloader - use "task 28 55aa", this would restore DOC to its original layout.
If you cannot - contact service center.
Click to expand...
Click to collapse
After this .... gues what .... EVERYTHIG run back to normal again
I will repeat myself:
MAMAICH
IF SOME ONE SAY THAT YOU'RE NOT A GOD - HI LIES !!!
AFTER THIS EVERYTHING IS RUNING OK ON MY OLD UNIVERSAL!!!
Thank you very very very MUCH !!!
Thank you again !!!
Hope this work to most of you
Oh My God !!!!! My Jasjar Recovered !!!!!!!
Thanks Alot !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
where is this task28 55aa? cus im in the bootloader screen but i cant get anything else to work
Step by Step :
get the tools at attachment , as mamaich told, you have to use it in bootloader mode , (Power + Light Bulb + Reset)
1. Stop Activesync USB connection
2. Uni : Reboot Bootloader then Connect USB
3. PC : Run mtty1.42.exe
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5. type : task 28 55aa
6. Press Enter
7. Cause DOC reformatted, so there's no rom in DOC ,try reflash any rom that you like .
For task 28 55aa in mtty success , will show the message (attachment )
DONE .
i can only choose from COM1, COM2, and COM3, it doesnt find usb, and ive try reconnecting in
i find you must kill the wcescomm, wcesmgr and rapimgr exe's using task manager before you get the 'usb' option in mtty (kills activesync)
rite got a window come up in the progam
typed "task 28 55aa"
next line came as "USB>"
so is that it done? cus i aint seen anything else happen?
afaik, thats it
now reset back into the bootloader again and load a (whole, inc radio) ROM
stupid question here, but the update i installed earlier effed it up, so where can i get one that def works, and how do i install it on lol, im think
If you want to make sure it works i suggest getting the latest rom from your carrier (orange? - http://www1.orange.co.uk/business/download/m5000/M5000ruu.exe)
then you can upgrade (if you want to) to other, perhaps custom roms and a later radio ROM.
i got o2 rom im trying to install but it says it can only do it thru activesync, but that wont find my xda, any ideas how to bypass that?
thats because you killed activesync in the last process, start it again (from the start menu) and the upgrade should work
restarted my laptop and still activesync wont reckonise my xda, any other ideas? (its still boot loader mode, if i do a normal reset the screen just loads red and scrambled)
start the update process while in bootloader mode, you don't need activesync at all.
yeh i got the rom to install on it, went to soft restart it like it said, press 0 to conitinue, and wat a suprise a red, green and blue scrambled fuzzy screen, any ideas where to go now?
have you installed the rom yet? if not you need to reset it into bootloader mode (http://wiki.xda-developers.com/index.php?pagename=Universal_Resets) and then start the rom upgrade.
yeh i reset it in bootloader mode, and i installed the new rom from the o2 website, but it didnt work, so i need a rom that either puts it back to original 02 settings or rom that at least allows me to get a workin screen up again
what was wrong with the o2 one you had?
i went to sell my phone, so i wanted to clear the data permanently, but i thought id put an update on it to add to its features aswell, but the update effed it up big style, and now i cant sell a broken phone
someone add to wiki.
Hi to all! I installed a new cooked great rom to my trinity a month ago and it worked fine. it is this rom
[ROM][ITA]WM 6.1 Elegance edition 2.14 (OS 5.2.19213 Build 19213.1.0.0)[ONLINE]
today I got a strange error and the phone was stuck. I unplugged the battery and when I started again it was stuck on the calibration screen. if I tap on the screen nothing happens but the backlight turns on if it was off so it still catches the taps. I connected the phone via usb to delete from the autostart menu the link to the configuration screen (welcome.exe) but the phone is not deteced by activesync so no way to browse folders on my device or use a program like SOTI to control the ppc. I want to bring it back to life as I know that my files hasn't been deleted. in fact if I press the right soft button I get a menu of a program I put in the ppc and it's not included in the elegance rom so I'm sure my files and my configuration and everything are still there.
if i get a phone call the phone rings (with the default ringtone anyway, but the name of the caller is displayed correctly, that's why I'm sure my device still has all my contacts and more)
what could I do?
is there a way to edit files from bootloader? does mtty work for this? (I have no idea how to use mtty so I might be wrong) could I make a full dump, edit the startup folder and reflash the phone with all my data?
I tried to use mortscript witht the autorun feature to read a part of the register regarding the welcome file and deleting it's link in the startup folder but the sd card driver is not loaded I think as the files are not launched, while in another phone the same script works fine.
thanks in advance to all who will have time and will to help me
pcwizzul
as far as i know (not that much), reading files from bootloader is pretty impossible.
You can always just reflash. If the touchscreen problem persists, it's possible that the problem is hardware related.
Your computer should detect your device when in bootloader, and failing that, you should be able to SD flash (assuming you're HardSPL'd or equivalent, thats just what we have in the herald forum)
Thanks for your help
I'm quite sure the hardware is fine as all my problems started after a crash of the OS.
Anyone has an idea to get access to my ppc?
pcwizzul said:
Hi to all! I installed a new cooked great rom to my trinity a month ago and it worked fine. it is this rom
[ROM][ITA]WM 6.1 Elegance edition 2.14 (OS 5.2.19213 Build 19213.1.0.0)[ONLINE]
today I got a strange error and the phone was stuck. I unplugged the battery and when I started again it was stuck on the calibration screen. if I tap on the screen nothing happens but the backlight turns on if it was off so it still catches the taps. I connected the phone via usb to delete from the autostart menu the link to the configuration screen (welcome.exe) but the phone is not deteced by activesync so no way to browse folders on my device or use a program like SOTI to control the ppc. I want to bring it back to life as I know that my files hasn't been deleted. in fact if I press the right soft button I get a menu of a program I put in the ppc and it's not included in the elegance rom so I'm sure my files and my configuration and everything are still there.
if i get a phone call the phone rings (with the default ringtone anyway, but the name of the caller is displayed correctly, that's why I'm sure my device still has all my contacts and more)
what could I do?
is there a way to edit files from bootloader? does mtty work for this? (I have no idea how to use mtty so I might be wrong) could I make a full dump, edit the startup folder and reflash the phone with all my data?
I tried to use mortscript witht the autorun feature to read a part of the register regarding the welcome file and deleting it's link in the startup folder but the sd card driver is not loaded I think as the files are not launched, while in another phone the same script works fine.
thanks in advance to all who will have time and will to help me
pcwizzul
Click to expand...
Click to collapse
if the sdcarddriver is not loaded then the following will not work but give it a try anyways. make a text file "whatever.txt" no quotes then rename it to "welcome.not" no quotes then put it in the root of your storage card and it should skip the whole startup process. that is if it loads the sd card driver or you might want to think about flashing another rom
I already tried the "welcome.not" trick but got no results. I'm afraid that the sd card driver is not loaded then.
Thanks for the hint irus anyway!
Really there's no way to read files from bootloader or something similar?
not that i know of
but the fact that your issue was noticed during a rom flash
dont mean it's not hardware related
much like a heart attack which happens during a thunderstorm
dont need be related to the thunderstorm
Wait! The error never happened during a flash. I never said it. I had that rom on my trinity since a month and it worked like a charm. Then suddenly I got an error and the phone was stuck.
I have understood what you mean but at least I hope it's not a hardware failure!
English OS System 20080801 Edition (ROM image) for M88 MiPhone
Please download from here
If somebody knows how to enter the bootloader mode of this phone please share here with us!
Here is the instruction for this procedure from the supplier which is nor working for me:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
If somebody can manage to install the ROM please write here the steps!
Thanks!
You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.
Problem Fixed!
GnatGoSplat said:
You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.
Click to expand...
Click to collapse
Thanks for your help, m8. It didn't work that way for me. I was adwised to do this:
1. Duplicate the update.img file and rename the second one as "uploader"
2. Copy both "update.img" and "uploader" on the SD - formatted in FAT32
3. Press POWER and HOME butons at the same time.
4. There are two possible options from here:
a) White screen with blue text showing "Upload image... please wait..."
b) Red screen with the options what to do in the next step -
5. I saw first the a) option - the white screen. So after 3 minutes of waiting the phone said it is done and it will selfrestart. After the restart - voila! There was the English OS loaded on my phone and everything was working perfect!
Hope this to help to other people too!
Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".
Check this out:
ZEMONTI said:
Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".
Click to expand...
Click to collapse
Check this out:
Resco explorer
Pocket Mechanic
Pocket Toolman
Resco is very useful thing so the other two are very powerful as well. You will definetely uninstall S2U2 with more than one of them.
Good luck!
Hi, is it existing a French release of this rom for M88 or can you help me for translate it ? Cordialy
Sorry for my english very bad...
MMS works in this rom?
MMS works only with Arcsoft_MMS_Composer_v5.0.31.16
bye
Mark
i have aquestion... : I was screwing around with the m88 phone and put in the original rom in (I've done this many times) but this time i forgot to use the other three files .img and ... i only had the update.img in the card... then when i tried flahing it , it was reading but the battery fell out and now it wont turn on.... any ideas on how i can fix this... ???? I really need the help please!!! If it is possible to fix this.
helppp
I need help i was updating mi os , but it takes more than a half of hour , and now it wont turn on again how can i fix that? thanks?!
problems
i have a daxian +999
i flash it whit that file it work but now i have a white screen the phone looks like ok but nothing shows in the screen only a white screen what i can do ??
My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.
problems in m89
hello, I recently bought a M89.
In general the phone is great, but mine has a very big problem.
As a PDA it works great, but when I insert my SIM card the phone just freezes. It works for just a minute after the SIM is inserted. I've even been able to make one or two calls before it freezes.
But past one or two minutes it just stops working. It doesn't respond to anything at all, the only solution is to remove the battery.
I think the problem is in the firmware. I've reinstalled a bunch of diferent firmwares: wm6 english, wm6.1 spanish, wm6 english again... and nothing works.
can anyone help me???, 'cause this is really killing me :'(
Thanks in advance!
oic0 said:
My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.
Click to expand...
Click to collapse
Just wondering - What is the size of your microSD card.
As far as I know m88 does not support SD card greater that 4 Gb by default.
Please, let us know.
Updated from SD Card ?
Hello, first of all I want to say thank you because I learned a lot from this thread. I bought M88 phone some months ago and is the first time I cannot use ( I really don't know what went wrong but finally the phone is not working or frezze ).
I bought 2Gb card and was formatted in FAT32. I also complete all steps in order to load the original image but I got this message: "updated from SD card?" and nothing more... What button must be pressed ?
I'll go crazy... do you know what's the next step ?
Thank you very much.
i dont understand sorry. i have to copy the "update" imgfile and rename it as "uploader"... and leave this two files : "update and uploader" in the root folder ?
I've install ROM from this topic: http://forum.xda-developers.com/showthread.php?t=452848
and now, when I try power on my MiPhone - it show only white screen - please help!
bootloading
the file, atleast on windows 7, shows up as "update". Also, I found it works must faster and easier to make 3 copies (4 files total)
naming 1: update.img
2: uploader.img
3: Update
and 4: uploader
(so the last 2 don't actual have .img in the title)
Then just make sure you hold down both the buttons, and vuo-la! haha
Doesn't fix the MMS problem though.
Does anyone know how to make it so that it can use mms?
Miphon m88
Danke es funktioniert supper !!
i got white screen too ;[ how to fix my phone now ;/ i dont see enythink ;[
My Diamond is rebooting constantly no matter which ROM I install. I tried original HTC Roms as well as different radios and stock Roms from Orange.
I do not even know if it related to the upgrading or if my device is broken.
So maybe this has happened to you too and you know what to do??
It stops and reboots in the installing process of the rom. Most of the time when the first boot screen shines througn (either Windows mobile 6.1 or 6.5). I have my device security unlocked and Hard-SPL from Olinex is working fine.
So do you have any idea what I can try besides try and make the guarantee work.
Thx a lot
Use this program that I attached.
First of all this program works with XP USB drivers(It works on vista if you change drivers ) and second you should disable active sync.
Go to diamond bootloader : Press reset + volume down.
In this program select USB port.
then CMD>task 29
It will format your bin and everything comes back to normal afterward.
Hopefully it will solve your problem
Source code
http://www.multiupload.com/4ECGKXPYJW
[Steps]
Extract above tar.gz in / and then
Download CodeSourcy Compiler from here
https://sourcery.mentor.com/sgpp/li...rm-none-eabi/arm-2011.03-42-arm-none-eabi.bin
Install above C compiler then issue following command in source directory extracted above
make ARCH=arm tsunagi_defconfig
make -j16 ARCH=arm CROSS_COMPILE=/arm-2011.03/bin/arm-none-eabi- zImage
When this steps complete you will get zImage in arch/arm/boot folder
New Image Android 2.2.1 with Audio , WiFi + AP mode , Bluetooth
http://www.multiupload.com/HFZUWFNX0I
Just extract above file to \Storage Card and go to \Stroage Card\2.2 click on CLRCAD (4-5 times) and then click on Haret
(In this version there is no need to copy nvram.txt to \Storage Card)
New Image Android 2.3.5 with WIFI and Bluetooth
http://www.multiupload.com/QUT30LPS8K
extract to SD card and then go to \Storage card\fathom
Click on clrcad 4-5 times and then click on haret
For wifi it is must to copy \windows\nvram.txt to \Storage Card
if it is difficult to copy from windows folder use attached one
[Note : In this version i have disabled fb console so you will not see any text while booting so wait at least wait 5 min if none appears do soft reboot and then retry]
I have worked on Toshiba kernel and ported that kernel for LG fathom.
As of Now following Works
GSM (Partially)
Battery
TouchScreen
3D
Audio (only through front speaker)
Keypad (Need some work with Fn key)
Battery
USB (start haret while usb connected)
USB Mass Storage and ADB
wifi
Not working
Bluetooth
Vibrator
Issue( Solved now)
1) Screen will flicker when USB cable was removed. workaround is to set any live wallpaper.
How to run
extract files on Storage card
goto /Storage Card/tg01
click 4-5 times on clrcad
and then run haret-pre-0.5.3-20100625_144828-QSD8250-ONLY.exe
http://www.multiupload.com/GK0FCMUVX6
for wifi extract following file and put replace zImage with this one and copy bcm4329.ko to /system/lib/modules also copy \windows\nvram.txt to \Storage Card
Link for wifi
http://www.multiupload.com/DOEAA1JXCD
great work
great job dude. this was totally unexpected.
at this stage of development with such performance its looking like bright future for android on fathom. installed it...will check...
thankyou
Hello bro, i'm from india. I own lg fathom and i checked yours installing android on fathom. Plz could u explain it in brief and also mention minimum requirement of storage on storage card and the type of storage card. Plz mention it in detail. I tried to install it in first and it gave error "smd_alloc_v1: cid 47 does not exist". And at the second time the screen started flickering and hanged up there only. So plz tell me in detail. I have been waiting for long about this.
jaggu5789 said:
Hello bro, i'm from india. I own lg fathom and i checked yours installing android on fathom. Plz could u explain it in brief and also mention minimum requirement of storage on storage card and the type of storage card. Plz mention it in detail. I tried to install it in first and it gave error "smd_alloc_v1: cid 47 does not exist". And at the second time the screen started flickering and hanged up there only. So plz tell me in detail. I have been waiting for long about this.
Click to expand...
Click to collapse
hey bro...am also from India(delhi)
first download sdformatter software (search it from google) and then quick format ur sd card using it. now copy the tg01 folder(the folder that contains haret application) to it. now tap clrcad 4-5 times...it may show alert, click yes....or it may not....after that jus click the haret app.....it should work now....and first boot will definitely be taking several minutes but after tht its great.
ajeet17181 said:
I have worked on Toshiba kernel and ported that kernel for LG fathom.
As of Now following Works
GSM (Partially)
Battery
TouchScreen
3D
Audio (only through front speaker)
Keypad (Need some work with Fn key)
Battery
USB (start haret while usb connected)
USB Mass Storage and ADB
Not working
Wifi
Bluetooth
Vibrator
Issue(s)
1) Screen will flicker when USB cable was removed. workaround is to set any live wallpaper.
How to run
extract files on Storage card
goto /Storage Card/tg01
click 4-5 times on clrcad
and then run haret-pre-0.5.3-20100625_144828-QSD8250-ONLY.exe
http://www.multiupload.com/GK0FCMUVX6
Click to expand...
Click to collapse
hey vijay.....i wanted to add some donation in ur paypal account but due to same country i was nt able to....kindly send me ur mobile no. i will send credit in form of recharge...
and please somehow try to shift sound to earphone if not main speaker...thats the most annoying thing
Thanx for fast response. Any way I got it worked by formatting in PC selecting FAT32 and followed your steps and it worked.Really THANX man for this. Really I sweated alot to search this. But many things are not working like can't call or disconnect(It takes ages to call , don't know how to disconnect). Also 3G is not working. Can u PLZZZZZZ put a stable android os. Already gingerbread version came for HTC HD2. Can u plz upload a stable Android with all features working. Once again Awesome work Thanx and take care.
yup....many things are not working.....but its jus beginning and with time the picture will change...
u can use it for playing some cool android games like angry birds....
also a surprise i got- thats an mkv movie 1280x720p playing very smoothly...
again thank u for your reply bro. Plz update this thread regularly as possible and also post the new things you find as i'm new for this forum and new to this tweaking. Thanx for the post.
really nice work, i was hoping someone to port android on lg fathom...
thanx a lot ....... but do release a stable version of android .. best of luck
Hello,
i'am from Indonesia, and own LG fathom.
i hope you can always update this thread
Thanks
flickers!!!! a solution
if u r experiencing flickers when on non home screen applicatins, settings, etc
jus open the mplayer app and press the start{central} hard key so that it runs in background....now do whtever u want.... no flicker anymore.....it should not happen again but if it occurs do the same procedure
download complete
when i try do the steps, it says linux booting but then screen flickr
after two times restart now it can booting
hope it can running well
Thanks
rvin42 said:
hey vijay.....i wanted to add some donation in ur paypal account but due to same country i was nt able to....kindly send me ur mobile no. i will send credit in form of recharge...
and please somehow try to shift sound to earphone if not main speaker...thats the most annoying thing
Click to expand...
Click to collapse
The amplifier IC is LM49151 and i am not able to find the driver for the same once we will get driver for that audio problem will be solved..
Hey ajit bhai, plz update the thread as and when u find any modifications.
Hey guys, after when switch on to android it takes around 15 minutes to get the signal and recognised and when u cal, the end button does not work so for that u have to press hold and then press end button and then it works. And it does not support messaging and internet also. I just thought to say the problems bcaz its my first time abt tweaking. So plz anybody finds any solution plz do let me knw. Thank u guys for ur advancement.
rvin42 thank u again for ur reply. Plz anybody found any changes for this. What i mean is that you guys know that some of the features are not working on when u port into android like microphone, no message support, no internet support although it shows operator name and also no speaker, bit flickering but you can follow rvin42's idea. So plz anybody do something. Try anything guys.
downloaded and will test it in a while. i can test anything you want, i have lg expo and its just my spare phone. barely use it for movies. i also want android with DLP support!!
ran it and haret froze, then ran it again and booted but got stuck at creating new data.
Hello el_venga, hey lg expo has same configuration as fathom, so plz if u find anything new or modification abt the android plz let us know man. Hey by the way if u need any help u can ask here.
sometimes stays at Booting Linux and then it just restarts to WinMob and when it finally boots get stuck where the pic is. btw it has to be in flight mode to boot there.
h**p://***.mediafire.***/?3rhu2u1w6b1i4u7
fill in the *s.
not actually stuck but just keeps going and the number at the left gets bigger and bigger.
when it finishes screen just stays black.
el_venga said:
sometimes stays at Booting Linux and then it just restarts to WinMob and when it finally boots get stuck where the pic is. btw it has to be in flight mode to boot there.
h**p://***.mediafire.***/?3rhu2u1w6b1i4u7
fill in the *s.
not actually stuck but just keeps going and the number at the left gets bigger and bigger.
when it finishes screen just stays black.
Click to expand...
Click to collapse
this happened with me too....
wht i did was formatting my micro sd with sdformatter ....
then jus follow the steps...and dont forget to tap clrcad 5 times before u run haret...hope it works