[Q] TWRP Bootloop on Tab Pro 10.1 with CM12.1 - Galaxy Tab Pro 12.2, 10.1, 8.4 Q&A, Help & Trouble

Sorry alittle new to the game and my tab pro 10.1 is on CM12.1, I went to factory reset the device and now it is in a constant TWRP bootloop. Unfortunately I cannot get into download mode as it just stays on the Teamwin page rebooting. I know I need to get back to stock and start from scratch, however I'm not sure what I need to do next to reload the OS. Thanks in advance!

Download the firmware from Sammobile. Odin back to stock. Root. Add TWRP.

but I cant get the device into download or recovery mode, it just constantly reboots staying on the Teamwin splash page. Odin wont recognize the device

achiquitachaser said:
but I cant get the device into download or recovery mode, it just constantly reboots staying on the Teamwin splash page. Odin wont recognize the device
Click to expand...
Click to collapse
This has just happened to me tonight, keep trying to get into download mode it took me a few attempts but I got there. What I want to know is why its looping in twrp after trying a factory reset? I have all my backups of stock, CM 12 and others, I'm well p##sed of I'm gonna lose these an have to start again.

Related

[Q] Help - There is something wrong with my Phone!

Hi XDA Forums,
I have a problem with my Note 2 for some reason.
Let me explain you what is wrong with my Note 2
I was sitting down and watching a movie, my phone was right next to me, The phone randomly turned off and after couple of second it had turned back on. It had showed the first every screen when you turn it on "Samsung Galaxy Note 2 N7100". Now from there it keeps on looping the same screen over and over again.
I had done some research before opening this thread, I saw that some people said I should try factory resetting it from the recovery mode, I then tried going on the recovery mode, it was not successful, it had showed me the same "Samsung Galaxy Note 2 N7100" screen and then repeated to boot loop it self again, I tried going on the recovery a couple of times but it didn't let me go on it.
Next I had then downloaded the 4.1.2 Official Firmware from SamMobile to flash it to stock again, I had then tried going on the Download Mode, It goes to the screen for Download Mode, but when I try pressing up to continue from the warning message it had then rebooted it itself and made it self stuck on the screen again.
Basically, my phone is stuck on boot loop, It does not let me access the recovery mode and it also does not let me access download mode.
ROM Using: Tigra_RomV3 4.3 Based ROM
Kernel Used: The Kernel which comes with the ROM or Stock, I didn't change the kernel myself.
If there is a internal problem does that mean I wont get help from the Warranty because the phone was rooted?
hello,
just try to use the jig, it should work...
use it so your phone will be in download mode, then flash your rom
Do you NANDROID backup? Maybe you may restore it by custom recovery.
Second, remove the battery first for a while and retry to access the RECOVERY and DOWNLOAD mode. If not, try the suggestion up there.

[Q] Hard brick

My brother has an S3 on AT&T running a nightly build of CyanogenMod 11.
It's been running this build for a while. However, he was on it today, and it crashed. Now it won't even try to boot unless you take out the battery and put it back in, in which it will show the samsung logo and shut off. It won't boot into recovery, it won't boot into download mode.
I'm thinking it's hard bricked, but why would it randomly hard brick itself like this? And is there any way to fix it?
Maybe it bricked because some files got corrupted? Not sure. If you can get into recovery, try wiping the cache, data, and Dalvik. If that doesn't work, you could try an updated CM11 ROM.
Did you try to get into download mode with a USB jig?
Its not hard bricked. Boot it into download mode and Odin back to stock
Sent from my Nexus 7 using xda app-developers app
Don't use desktop Odin if the phone has been updated via an OTA update to stock AT&T 4.3 ROM.
I'm the brother with this problem, I just couldn't post at the time.
Anyway, I can't boot it into anything. not recovery, not download mode, nothing. The only way I can force it to even try to boot is to take the battery out, and back in.
After this, "Samsung" appears for all of about a second, and it shuts off again.
Edit: it seems I can boot into download mode, but like the samsung logo, it disappears. It's almost as if it's crashing after a second each time. Any ideas?

Hard bricked GT-P5200 (can still access download mode)

Hey guys
A friend of mine was flashing his Galaxy Note 3 GT-P5200 and it suddenly froze, then it restarted.
Now at every restart, it's stuck in a recovery loop.
I can still access donwload mode, and I've tried flashing several firmwares with Odin but it still reboots directly to the recovery mode and restarts.
I've tried flashing different recoveries, but it still reboots every time.
Is it hard bricked ?
If it is, what are the solutions ?
Thank you
hamidv2 said:
Hey guys
A friend of mine was flashing his Galaxy Note 3 GT-P5200 and it suddenly froze, then it restarted.
Now at every restart, it's stuck in a recovery loop.
I can still access donwload mode, and I've tried flashing several firmwares with Odin but it still reboots directly to the recovery mode and restarts.
I've tried flashing different recoveries, but it still reboots every time.
Is it hard bricked ?
If it is, what are the solutions ?
Thank you
Click to expand...
Click to collapse
If it stays in recovery mode long enough to perform a cache wipe, try that. Then a full data wipe/factory reset. If you can't get that to work, then I have no other ideas. You did flash a full firmware package in Odin, correct?
gr8nole said:
If it stays in recovery mode long enough to perform a cache wipe, try that. Then a full data wipe/factory reset. If you can't get that to work, then I have no other ideas. You did flash a full firmware package in Odin, correct?
Click to expand...
Click to collapse
Unfortunately it doesn't stay on the recovery mode even half a second.
It restarts right away.
And yeah, I've flashed the correct files again and again but the problem persists.
I guess it just went to electronics heaven ...

Tablet stuck in cyanogen loop, cant reflash, cant format - help!

I've had a problem with this tablet for the last 2 years and i keep giving up trying to fix it.
I have custom recovery and a version of installed on it. When it boots cyanogen works for about 5 seconds and then it crashes. When i reboot the device the same thing happens. When i try "Turn off" the device it refuses to turn off and the loop continues.
When i enter custom recovery and try wipe the device it tells me its wiped and when i restart the device it hasn't wiped and reverts back to cyanogen.
When i use Odin with the correct MD5 file and load it into PDF odin successfully flashes it to the tablet. Then when the tablet starts up it starts back into cyanogen.
I cant get back to stock and i cant remove cyanogen. Please help! its driving me nuts!
Galaxy Tab 3 - SM-T210 (not the SM-T210-R)

SM-T525 almost bricked - only download mode working. Help!

My Galaxy Tab Pro 10.1 LTE (SM-T525 aka picassolte) is a kind of bricked -
only download mode is still working.
In short, this is what happened:
First the device crashed and went into a boot loop.
I started in recovery mode and saw that the data partition could not be mounted.
At the next start even recovery mode did not work.
Only the TWRP logo appeared, then the device shutted down.
With Odin and download mode I re-flashed TWRP,
and as this didn't help, I flashed stock ROM.
Odin each time reported successful flash,
but problems on the device persist.
I could imagine that the partitions on the internal memory
need to be reformatted, but I don't know of any way
how to do that from download mode.
Any help for getting my device working again is appreciated.
Regards,
Gene
Update:
After doing even more research on the net, I found a stock ROM based four part recovery firmware. Flashing that I got the device at least working again in normal mode. ) Let's see if now TWRP and Custom ROM can be installed again.

Categories

Resources