Develop Bugs

iface case

Just want to share a review of this case which i bought and have used for 1-2 weeks.
just a bit of background about why I chose this case.
I was looking for a tough case and find that the otterbox or casemate tough do not fit what I am looking for.
i had a otterbox commuter case for my HTC HD2 and the polycarbonate break easily around the edges where the ports are... i really want something that is rubber around the edges instead of plastic (I bought the defender case in the as replacement and that's exactly how it was.)
Unfortunately, the defender case is not available for the SGS2.
I have gone though 2 sgp cases and the neo hybrid breaks easily around audio port/ extra hole at the top right. and so my hunt for a tough case started.
so about this case.
This case does adds considerable size to the SGS2. it adds about an inch at the top and bottom of the phone and about 1cm at the sides however do take note that these extra additions are all of rubber material so your phone is really protected well against drops and bumps.
This is how the case itself looks like and its thickness relative to the phone.
the way the case is designed is like a 'hole dug in the middle of a brick'. and the phone fills perfectly into the hole and is now protected by the case.
The case is also ergonomic designed to be used for games when using the phone in the horizontal position.
the 2 pictures below are what the phone now looks like with the case.
Pros:
-Fully protected by rubber around the phone and therefore protects well against accidental drops and bumps.
-Feels good and have a better grip when I play games now on my SGS2
-Has different colours available as compared to casemate tough and otterbox commuter
Cons:
-The increase in size and thickness of the phone is not something that everyone will like.
-Due to the extra inch, I can only use a USB cable to charge my phone and therefore eliminating the use of sync stands like Zenis. My L shape earphones still fit into the audio port without an issue.
Conclusion for this case
I really like the case and it fits what I am looking for in a case that is able to protect my phone well and not look dull.
I would give it 4/5 for the case and it cost around USD27 excluding postage from Korea.
For guys who are interested, you can check out this link: scroll to the part where a video is embedded and see the case being subjected to drop test.
http://english.gmarket.co.kr/challe...90000001&pos_class_kind=T&keyword_order=iface

Great review! Thanks for all the info... Really helpful!

[Review] PDair Horizontal Pouch for HTC One X

I got my PDair horizontal pouch for my HOX. Love it!
First of all, in my opinion, carrying phone in a pouch on your belt is the best place for it - it's safe, accessible, and there's no need for ugly cases.
Pics are below. Here are some points:
Perfect quality - no defects at all, these guys know how to manufacture quality stuff. I could easily lie that this case costs $80+ if I wanted to =)
100% Natural leather
Coushioned both outside and inside, real pleasant to touch
PERFECT fit for HOX - case was designed from scratch I guess, since it fits so damn well.
Sides have stretchy inserts for ease of access
Inside is made with wrinkled leather - soft and won't leave any residue on the phone.
All corners are covered (!), almost no chance of nicking a corner of your HOX over a table or something
Magnet clip, easily attaches and detaches.
Bottom cut-out, to make it easy to remove the phone quickly
Belt clip is VERY solid. It's full metal wrapped in leather, attached with metal stud. Attached very firmly.
Sown with white thread, looks very cool.
Inexpensive - $29 USD (no tax, free shipping) on their website. Took 2 weeks to deliver though.
Comes in a gift box, wrapped in tissue paper, like a freaking birthday gift. Yeah, seriously.
I highly recommend it. Ditch your plastic cases, just get this - your phone will be safe, and.. naked!
Pics:

SGS2i9100 white, mainly cases pics and etc gear

hey all. this is just simply pics of sgs2 and cases, covers etc.
all these covers are dirt-cheap! most are foudn thru ebay or amazon. Do not use excessive quoting in any form!
pic 1: standard sgs2 i9100 nordic white version.
pic 2: case-mate clear case cover, very comfy TPU-style case. the stupid triangular indentations on the back seems to helpescape the blemishes coming from simply cleamching the tpu gel onto the glossy finish of the phone. Not that that really means a thing! The clear rim is a nice feature, showing the chrome bezel off the SGS2. The firm grip comes with the tpu style, the bumper protects all the edges and <obviously> the back camera front surface as well. All covers however, do vocer the camera protruding area. Can recommend this cover!
pic 3: This, a glossy clean white case, made of tpu, a lovely cover, this covers never lost it's white for months. Until - I put it in a bag for a few months at max. the result was this cover was stained in several ways, pencils' helping included, yet surprising how this 'storage' made it look real bad, darkened, stained, after being dumped so to speak.
pic4+5: both of these covers have no cut-outs for side buttons. they are not hard to control though. I have certainly tried worse with a SGS3 cover, whereas the side buttons are askew, tilted backwards to the back of the phone. Using TPU cases on SGS2 is quite okay, albeit can be hard. Nowhere the same issue as on the SGS3. Quite acceptable as you will eventualy know where and when to punch those voume and power buttons.
pic 6+7: comparison of the white TPU and the clear TPU case-mate covers,
pic8-9: these show the same TPU cases, and these come with some screen protectors. cases and covers come with a variety of screen protectors. so do these here, and how to categorize those, will be another matter, cos there's so many different ones. and i dont use a single one
pic 10: this show how a textile mini towel can be saved up for later polishing of the screen. And yes, this wil surely overheat your phone if all you do is play TinTin all day. The SGS3 has a way more back panel to give, and fits 'standard' towels fine.

pic 1-2: No sweat!
Pic: 3-5: that white dirt cheap tpu gel case. Nothing bad to say about this case. Other than if you remove it, put it in a tight plastic bag first - otherwise it will not stay white!

this post is about screen protectors.. happens they all look alike, out of the dozens i have.. there is a few matt ones etc. .. so no screen protectors stupidities. swipe along this post then. if you want to believe: swipe it clean frictionless.

some really awesome bigass covers for scouts
This G931. Golla holster is really neat. As many other holsters I did not find it practical in everyday. Which is a great unfortune! this is a great rain repellant pouch. This particular holster fits a variety of phones WITH cases on, which includes SGS2, S-E arc-S, and those sizes. The pouch has an extra zipper pocket at the belt side, which is a WIN!. Several in my family found it useful indeed.

Golla
pic 1-5: GOLLA G1065. this golla pouch is really nice. a sorta denime color, with damaged areas, a badge, a wide belt fitting, double velcro in the front for the front face flap. The credit card deposit is a JOKE, it is not functional, not useful. In general this pouch is very comfy and absolutely a great looking pouch. Only it does not come handy, for at least, me.
This pouch works as well for S-E Arc-S - even with a cover. Are you needing over protection, then this pouch is there to fit that extra belt.

Golla G1065
this is a previous Golla case. G1065. very very the same as to the previous sandy colored golla pouch. this fits a SGS2 as well, including a case. It also fits the S-E- Arc-S. I would not recommend this case.
it has poor rear hooks for straps - certainly a joke with the brutal vinyl look of the rear of the pouch! the supplied neck chain is a joke, just as the attached flimsy hook is. This model has been discontinued i think, for obvious reasons! I owned it and it was a piece of ****!
EDIT: i will ad a wel photos of the HTC Desire Hd in this pouch. IT will happens when it DOES.

Pic 1-4. shows the typical 'vent' case covers. These <supposedly> relieve the heat from the... COOORE. These are comfy feeling cases, they don't do much, their weight amunt to zero, and can be found in any color.
Pic 5-7: The WHITE vent case sent here was for a korean phone. Notice the antenna area, and the enlarged button areas, and the obviously showing MISSING protectionate corner on the right-hand-side (seen from the front).

Hi, are those hard or rubber cases?
Looks very cool, thanks for the ideas

Seidio Dilex Case

Hey XDA,
I recently ordered this case to replace my Ringke Fusion (which I both like and hate) and hopefully I will like it enough to keep it as my long term case. I haven't noticed much as far as reviews for this particular case so I was thinking of doing one for it. I have a new qi charger coming with it so I should be able to test that and see if it adversely affects the glass screen protector I have on right now. If anyone out there is interested in pictures of the case on the phone or anything like that, let me know and I'll do my best to include them when I review it on Thursday, I'm a little bit of a case junkie and typically try out several for my phones during their life time, but this is the first higher end case I'll have for the N5 and I'm really excited to see how it turns out.
Seidio Product Page
moonDOOM

Probably no real reviews of this case because they're already well-known. Others have already posted, and I'll back it up, Qi wireless charging works perfectly with it. Simply the best cases you can buy. Also, the holsters are pretty fantastic.

I got the case in today and as apparently everyone knows already, this case is quality made. I previously had a Ringke fusion case on my N5 and liked being able to see the nexus logo, but hated the tpu layer and how the back collected dust every time it was put into a pocket. I decided to go with a more traditional 2 layer case and I thought that the Seidio Dilex looked the best out of the ones currently available.
Pros:
- After seeing the product in person, I'm immediately sold on this design. The case is much darker black than it appears on the website (bright lighting in their product photos) and the rubberized coating on the PC layer is the classic silky smooth texture that Seidio is known for and has used for years. On a side note, the other colors are actually really nice looking too if you prefer something other than black and it looks like they have the same texture coating. The case feels really good in hand because of the soft texture and the silicone actually feels really similar.
- The kickstand also adds just a little weight to the bottom of the phone and makes it somewhat easier to balance, hold and manipulate with one hand. Speaking of the kickstand, it's actually aluminum instead of plastic which is a nice touch. The best part is that the kickstand is spring loaded (slightly) to the outward position but also contains a magnet to hold it securely in place when not in use. It appears to be pretty well attached to the case so hopefully it will hold up over time.
- The ports are all pretty well lined up with the cutouts and they seem big enough to accommodate most cables.
- Qi charging works just fine, at least on the cheap chinese one I also got in today. NFC doesn't appear to be affected either, although I only tried once.
- I'm currently using a Nillkin glass screen protector and it appears that the silicone is soft enough not to interfere with the edges of the screen protector. May not be the same with other brands.
Cons:
- The only thing I can think of is that because the outer layer only presses the edges in the middle and corners, the silicone seems to be a little loose or saggy inbetween the "arms" of the outer shell. I'm hoping that settles into place over time but if it catches on my pockets too much, it might actually get worse.
- The sticky texture is great for grip, but also picks up a lot of dust, but that's not news to anyone who has used a silicone case before.
In conclusion, I'd probably give this case 4.7 out of 5 stars. I like just about everything about it but I wish the silicone they used was just a little less pliable.
Pictures of the Case
Sorry, I know the pictures are garbage (I had to take them with my old phone so the N5 could be in the case) but I'd be happy to answer any questions y'all might have.
moonDOOM

Looks real nice little too thick for my taste though.
Sent from my Nexus 5 using Tapatalk

This looks almost exactly like the generic thick kickstand cases that are being sold under various brands at various prices.

Dilex Case and Qi
Good morning. I wanted to follow up on your case experience with Qi charging I put this case on a Samsung Galaxy S5 and used a powerbot circular charging pad. I found that to get the charger aligned, I needed to prop the device up on the kickstand so it was a little firther from the pad, and I could not get a charging lock.
I'm trying to figure out if that is a function of the powerbot's charging signal or the anatomy of my Qi pad. Does your phone sit square on the charging pad? or is it propped up on the kickstand?
Thanks,
Marcva

Pixel 3 XL - Multi Case Review

So, as I have done with my last few phones I have obtained many of the most well-reviewed cases (and some not so) to see what I like best. I thought I would share my thoughts so that others might get some better insight into what's out there. I realize that cases are very subjective based on your specific goals for a case and your general tastes. With that in mind I’m just going to start by mentioning a bit about my own habits/likes so you can get an idea of what might influence me.
Like many (I think) I like to have a case that is as minimal as possible which still offering a level of protection against drops and bumps. I am definitely not an “otter-box” type guy who likes huge rugged cases with built-in screen protectors. Especially as phones are getting larger and larger I can barely fit them in my pocket even with minimal cases. To that same point, I tend to like very “sticky”/"grippy" or tactile cases as these large phones are also hard enough to hold as-is. I suppose if you have really large hands this might not be as much of an issue, but for me it tends to rule out a lot of cases that look great but feel “slippery.”
I tend to do a "stick test" where I lay the phone in the case flat on the palm of my open hand and then slowly rotate the phone to a vertical position The longer it takes for the phone to not slide off my hand, the better. Some cases will allow me to stand the phone basically straight up gripping my hand without me using fingers at all. Results are not totally scientific as the temperature/sweat on my hands can influence the outcome to some degree but overall I get a better than/worse than result.
As a real-life example of what I prefer, refer to my last 2 phone case choices:
HTC M8 - SUPCASE Unicorn Beetle Premium Hybrid. I loved everything about this case for the M8. It looked awesome, had just the right amount of protection while still being a slim case. The material isn’t the stickiest but based on the curve of the M8’s back, which this case follows, it creates a great curve in your hand for a fantastic fit/group.
LG V20 - Ringke Fusion Smoke/Clear Case - Unfortunately they didn’t make the same SUPCASE for my V20, so I went with this one. It also is a hard polycarbonate back (but not too hard/thick) with a more flexible TPU bumper. It has a great amount of tactile stickiness and the phone never slips from my hand.
As evident, I’ve tended to gravitate towards relatively clear cases on my last phones because the phones themselves have been great looking phones (brushed metal all around, etc). I purchased the Pixel 3 XL black, which while a nice looking phone really isn’t anything spectacular and I think the right case may even improve the looks (something I didn’t think was true on my above 2 phones).
Taking the above into account, below are my reviews/thoughts on the cases I’ve tried for the 3 XL. I’ve divided them into several categories for easier comparison which you will find below:
Full TPU Cases
I don’t normally like full TPU cases because they don’t offer much protection and tend to feel “squishy” due to being made totally of flexible material. Still, they are light-weight and the clear ones offer a good view of the phone, so I decided to try a few out.
Cimo Slim Grip ($8) - Like all the clear TPU cases I reviewed, they still have a yellowish tinge right out of the box. It’s hard to know if the cases will yellow more over time, but you can definitely see the yellow in the thicker parts (and around the cut-outs). Once the phone is in the case it is harder to see this, and since all the clear TPU cases suffer from it I supposed I can’t dock too many points.
As a TPU case it is super flexible and super tactile/grippy. Unfortunately the inside of the case is as well which makes getting it into the case evenly is difficult. There is barely any lip to the front of the case, so not much distance between the screen and a flat surface. Additionally the lip seems uneven, and not sure if this is manufacturing or simply because it is difficult to line the phone up perfectly because of the grip of the TPU. Buttons (volume/power) have good feedback, overall what I would expect for an $8 TPU case that offers mostly scratch protection.
Totallee transparent case ($28) - Almost identical to the Cimo in all regards that a clear TPU case can have. It does perhaps a slightly better fit and quality (though still yellow tinge). It is incredibly flexible, more-so than the other TPU cases. The largest downside (for my needs) is it has virtually no lip. If you place the phone face down on a flat surface I’m sure that the screen will make contact in many situations. Overall is is a nice “barely there” case that doesn’t add bulk or size, but for $29 it is really hard to recommend over the Cimo.
Spigen Liquid Crystal ($11) - A combination of the Cimo and Totallee cases. It has a better lip than the Cimo and a better fit and overall quality. If you want a low-profile clear TPU case I think this is the one to beat.
Dretal Carbon Fiber Shock Resistant Brushed Texture Soft TPU ($8) - Unlike the other pure TPU cases this one is a brushed metal/carbon fiber black instead of clear. The case design is nice, but doesn’t seem the best quality, with minor imperfections in the melding of the parts. Also the carbon fiber pads on mine looked scratched/hazy out of the box on parts of them, something I’m sure will happen over time making this case not look as sharp. Apart from look, unremarkable in any other way (good or bad). While this is a very flexible TPU case (making the phone super easy to put in/get out), it isn’t a very grippy case and I found it slipping out of my hands more than the others. This would appear to be a “knock-off” of the Spigen Rugged Armor - a case not available when I was ordering my lot. For the small difference in price if you can get your hands on one I’m not sure why you wouldn’t opt for the Spigen.
Polycarbonate (PC) - TPU Hybrid Cases - Light-weight
These are the types cases I usually prefer (along with the mid-weight ones below). Their harder back brings some rigidity and strength to the case and the rubberized bumpers provide some additional protection. Overall I find these superior to pure TPU cases while in some cases adding very little additional bulk.
MoKo ($7) - This is like the PC/TPU version of the Cimo from above. Decently grippy, though not as much as some of the other cases in this category. It is stiffer with the PC back and the rubberized edges are also pretty hard. The buttons are responsive but like a lot of cases in this and the TPU category they volume button is not split (up/down). This can make it difficult to tell which direction volume you are pressing. Lip is pretty good - possibly the highest in this category. There are little nubbins on the back corners that raise the case slightly from the ground. While these might help protect the camera by raising it a bit more, I wonder if they act as a buttress to strengthen the corners, they seem largely unnecessary though a few models incorporate similar designs.
VRS Crystal Chrome ($12) - While more expensive I found this to be mostly the same as the MoKo, but lesser quality. The lip is also the lowest out of the cases in this category, though to be fair the case may be the thinnest (though not by much). Nothing really here that can make me recommend it over the MoKo, especially at this price.
Ringke Fusion ($9) - Very similar to the MoKo in all respects. Might be a little better quality, but I could just be influenced by the brand. Volume control is also one button, but buttons seem a bit friendlier to use. Like the MoKo it has little nubbins on the bottom corners (more stylized). Also has a place for a lanyard (if that interests you). I think this would be my pick in this category if only for the reason that you can get it in a “smoke” color. Even with a black phone I feel the smoke adds a bit of “texture” to the look and prevents yellowing better. I don’t think the Pixel is pretty enough that it needs a completely transparent case anyway.
Spigen Ultra Hybrid S ($14) - Basically identical to the Spigen Liquid Crystal but with a stiff PC backing. It has slightly larger buttons and a kickstand. Personally, I don’t like the way the kickstand offset feels in my hand and I don’t think I’d get much use out of it. I don’t have much experience with the kickstands and they seem a bit flimsy to me. I’d be worried about it breaking off and then just having a busted case. Volume button is also two-parts, which makes feeling for them a bit easier. Once or twice I felt this case was a bit “squishier” in my hands, but the phone might not have been seated well. If you want a clear case with a kickstand, this is probably a good bet.
Polycarbonate (PC) - TPU Hybrid Cases - Mid-weight
Along with the light-weights, I prefer these cases. It is often a fine distinction, but I tend to feel these cases have a bit more “padding” offering some more protection with a very minimal change in footprint. But, this designation is a bit subjective so you could group these with the lightweight above - the main difference being these aren’t all transparent all around.
SUPCASE Unicorn Beetle ($13) - I really wanted to love this case as it is what I had on my HTC M8. Unfortunately, while the back is highly tactile, the rubberized side bumpers are pretty slippery. The bumpers give a good lip, but they also extend around the back of the case a bit, creating what amounts to a small rear lip. This causes the back not to rest as snug in your hand causing the whole case less grippy. Additionally the power and volume buttons are basically flush with the case making it a bit difficult to find them easily (and also promoting a smoother/more slippery surface on the sides!). The buttons are responsive though and the case is really easy to swap on/off. It has a nice clean look and I think would offer a good amount of protection, but I don't think it is the winner for me this time around.
Ringke Fusion-X ($13) - Built like the Fusion but with some more meat on the edges, an overall stiffer case. A tad bigger all around than the Unicorn, and seemingly certified Mil grade tested. The design is more stylized - a “rugged” looking case while not being overly bulky. The texture of the design gives it some grip, which is good because otherwise it wouldn’t be very tactile. More defined volume buttons. Might be a competitor to Unicorn, except the sides are pretty slippery. It also has a lanyard hole.
This is probably a good choice for a more rugged look coupled with slightly more protection (at the expense of some added bulk). For me though the slipperiness of the case offsets the additional protection it might offer. I’d rather not drop it in the first place then have it be more protected when I do! But as a secondary “rugged” case for someone that doesn’t like overly bulky cases it might be a good fit.
UAG Plyo ($40) - A really interesting case. At first I thought it was the biggest in this category but it actually seems to be the same size as the Fusion-X (perhaps a hair smaller!). It is virtually the same size as the Unicorn Beetle and even the lightweight Ringke Fusion. Unlike these phones however it has straight, not beveled edges so it initially gives the appearance of it being longer, but it really isn’t (it might be a hair thicker, but when put side by side it is virtually unnoticeable). Seriously, I almost dismissed this case out of hand as being too large, but when I compare it again to other cases I was highly considering I see that it is similar in size.
It is Mil-spec tested and unlike the Fusion-X it is very grippy. Perhaps not as grippy as the Fusion, but a close second. As you also might expect with a thicker case the buttons and side “squeeze”seem a bit harder to press, but not unworkable (and Active Edge sensitivity can be adjusted). It has a smoky tinge to the color and a honeycomb pattern at the bumpers give it a cool look. The sides and back have a slight inward curve which is visually different and I think actually helps with the grip. While I haven’t tested any of these cases with wireless charging, UAG states that this is compatible - which would have been one of my only concerns for a "rugged" case. At $40 the price is relatively very high and this may be the only reason can’t recommend the case, or at the very least choose it for myself.
Polycarbonate (PC) - TPU Dual Layer Cases
I don’t prefer these types of cases, I find them to usually be bulkier and not usually provide more protection above the mid-weight single layer cases. They are almost never clear/clear-ish cases either though their dual layers can offer some interesting visual designs. My wife happens to be a fan of these, which is why I ordered a couple to check out.
Spigen Tough Armor ($17) - Honestly, I didn’t even realize this was a dual-layer case until I was reading some more about it for writing this review. I had it placed with the mid-weight cases above. Functionally I find it very similar to the Unicorn Beetle, despite it’s dual layers. It is basically the same size although with beveled instead of rounded edges. It was easy to put on/take off with both layers attached (part of the reason I didn’t realize it was dual layer).
The outer layer wraps around the middle and sides, but does not offer more protection around the corners. As the name implies, this is supposed to be “tough” and has some level of Mil-grade testing. I’m not sure I feel it would withstand that much more punishment than others in the mid-weight category though. It has the same flat buttons that the Unicorn does but the materials are not as grippy and can at times be quite slippery. Aesthetically, a very nice looking case but the all plastic kickstand mechanism seems flimsy. The kickstand does removes easily and they probably should have provided at least 2 spares with the case (which would have cost them pennies to do).
Spigen Neo Hybrid ($14) - Overall a really nice looking case - almost identical in size to the Tough Armor (perhaps a hair smaller all around). The outer layer wraps around the edges/corners of the phone than the middle like the Tough Armor. Unlike the Tough Armor, the edges are rounded as opposed to beveled. Volume/power buttons are easy to feel with good tactile feedback. I don’t think the thin outer shell is offering much more protection than the rubberized bumpers on the mid-weights above. It is however more grippy than the Tough Armor and also apparently has a Mil-spec rating. Unfortunately after several tries I still couldn’t get the outer shell to sit flush with the camera outline (it was raised around the camera's lower edge). Apart from that last issue, if you like dual layer cases and like the look of this one, I can recommend it.
Tudia Merge ($9.5) - Like the Spigen Tough Armor, the outer shell wraps around the middle and sides. It seems mostly aesthetic, but the metal look is very appealing and surprisingly not as slippery as the plastic on the Tough Armor. Buttons are a little stiff but overall feel good and the lip is sufficient. You can get it on and off easy without removing the back. This ended up being my wife’s pick.
BentoBen Slim Glitter Bling ($10) - This is mostly a “glamour case”, albeit a decently put together one. Quality is good although the paint on the edges will wear over time. On average the same length and width as many of the lightweight/midweight cases but a little thicker. Unfortunately this thickness doesn’t give it a superior lip (though it is sufficient). The buttons are a bit too recessed for my liking, but not stiff. The outer shell is actually pretty grippy due to the texture. We ordered this one only because my wife had the same one for her V20 and still she is opting for the Tudai this time around.
Miscellaneous Cases
Only one case doesn’t fit into the above categories. I ordered only to complete all the Spigen cases available for my phone to try it out.
Spigen Thin Fit ($10) - Basically a “non-case.” A small black clip-on that seems designed simply so you can use a magnetic holder without having to attach the magnet sticker to your phone directly. It adds virtually no bulk, but is slippery and would offer very little protection except from back scratches. Unremarkable for what it is and if you want something to prevent your keys from scratching the back of the phone it will work and probably slide in and out of your pocket easier than a TPU case. As for me, I’ll pass.
Well, that's all the ones I've tried out. Other well reviewed cases that I couldn't find on Amazon which I wanted to try:
Caseology Legion Series
Spigen Rugged Armor
Incipio DualPro Pixel 3 XL
Tech21 Pure Clear
Speck Presidio Stay Clear
For now, I think my choice is the Ringke Fusion, just like I had on my V20. Perhaps if the UAG drops in price I will move over to it.
If I check out any more or have any updated thoughts I'll update the thread.
I'll probably be hanging onto these cases for about a week before return, so please feel free to ask any specifics and I will try to get an answer.

So you buy these, review them, then return them?

airmaxx23 said:
So you buy these, review them, then return them?
Click to expand...
Click to collapse
Yes.
Most of these aren't available anywhere except online so there is no way to find if you will like a case without actually trying it.
The $10 I will pay to ship them all back to Amazon is worth it to find a case I like.

Don't forget Spigen Slim Armor and Google fabric cases

airmaxx23 said:
POST DELETED BY MOD
Click to expand...
Click to collapse
he's not, otherwise there wouldn't be a return policy. or, they would be sold in b&m stores where they could be tried on first, which would likely Jack up then price 2-3x. these cases cost pennies to make, maybe the best ones break into the very low dollars. returns are the cost of doing business.

Thread cleaned. Please keep comments on-topic. Disrespectful opinions about how the OP goes about acquiring the cases for reviews aren't needed.
Had @kellybrf not commented, I would have said the same. He's not taking advantage of any system. Amazon's return policy is interesting in how it's handled. If he's paying a return price, that means he's selecting the option that doesn't include the words "defective" or "not as ordered", etc. He's being honest with them about why he's returning them, otherwise he wouldn't be paying for return shipping.

The rugged armor is on amazon, did you not see it? would be curious how it compares as i use on all my phones

Thank you for the well-written review. It is very appreciated. My Pixel 3 XL is due to arrive on Monday the 17th. So I am in search of the required accessories. I require excellent protection as I drop things quite often ?

I have the Incipio DualPro. Love this case. Fits perfect, and has a perfect rubbery/grippy feel.
https://incipio.com/cases/more-devices/google-smartphone-cases/dualpro-google-pixel-3-xl-case.html

I've tried a few cases and, not speaking about phone protection, but I have found that none of the ones I've tried (all three were Spigen) are compatible with the Pixel Stand. The cases make the phone too thick to remain vertical on the stand.

I bought a otter box defender case the same time I got my class....I dropped the phone twice since and I have zero damage. Worth the money....not that bulky...

Uag plyo It is a very nice case with great protection. Wireless charging works perfectly. great case.

oneandroidnut said:
The rugged armor is on amazon, did you not see it? would be curious how it compares as i use on all my phones
Click to expand...
Click to collapse
Long time replying, just wanted to state that the case was not available on Amazon when I was ordering cases. It may very well have gotten back into stock afterwards.
I am still using my Ringke Fusion case and I don't have any major complaints. The tactile/sticky nature of the case has been in line with my previous cases which I purchased for similar reasons.
I would still like to get the UAG Pylo, but not until I can find it for ~$15 (which may never happen). As I have never dropped the phone so far, I'm not sure the slightly extra protection of the UAG would even be necessary, but it is a distinctive looking case.