i know the TPU case with the plastic back covers it and the plastic hard snap-on cases cover it
from what i've seen these are the only cases that wrap around enough to completely cover the bezel, but maybe you guys would know of other that do, preferable tpu. i switch out batteries all the time so the snap on cases arent the best since they are tough to remove.
thanks
TPU?
You didn't really ask a question...
semantics...... im looking for a case that covers the chrome-bezel, for those who didnt understand the topic
anywho...tpu is that high grade plastic that feels rubbery, like the argyle cases daydeal sells
Otterbox commuter case does. Best case i have bought for a phone, feels great in the hand and looks very good. Wont ever go without it
Sent from my SGH-T959 using XDA App
How much bigger does the Otterbox case make the phone? The other Otterboxes I've seen (for other devices) were a significant addition to the thickness.
Otterboxes and cyclops cases make the phone feel FAT. REALLY fat....it completely kills a device that was designed to be thin. Personally, I'd recoomend you this:
http://forum.xda-developers.com/showthread.php?t=772826
Covers the bezel, does not make the phone look fat. Looks great from the back also. Rubbery only on the sides. Don't get the new edition as it's a poor fit, get the old edition which doesn't have cutouts for the buttons. Then, if you have problems with the power button, put a little piece of paper on it and it will feel great to press.
Also, the case makes the phone nearly indestructable. I've dropped it 7ft on concrete. Case got a concrete scratch....phone was perfect.
Thanks for the suggestion! I was considering either that one or the one mentioned in the second post of this thread: http://forum.xda-developers.com/showthread.php?t=1098214
I just don't want anything that's too big and fat (don't need my phone to look like me. LOL)
That one from the post is nice except it doesn't cover the bezel on the top and bottom. That's pretty major for me, otherwise it's a great case. Similar to the mesh ones. The one I linked you covers everything and is thin.
i had that one, but the glue started coming off where the plastic is attached to the rubber. i would like one thats all rubber because the plastic back is slippery, there doesn't seem to be any other option though to cover that bezel
superglue. I did it to mine and hasn't moved since.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just received my Otterbox Commuter all-black case for my HTC One Stealth Black. I bought it from eBay. I read in another thread about the country of assembly being important for the quality of the case. Although the location of the seller is in the USA, the retail packing of the case says "Assembled in China". However, i haven't found a single flaw with the case itself. It fits my HTC One perfectly. There are no anomalies with the case. I think the Q.C. on the China-assembled units have improved. Anyway, i'm very satisfied with the case itself.
Link to the official product page: http://www.otterbox.com/HTC-One-Com..._htc4-one_color=20&start=1&cgid=htc-one-cases
Here's olis4's youtube video review of the Otterbox Commuter all-black case: http://youtu.be/GpNBThwyubM
On the manufacturer's site, the Commuter case is currently priced at $34.95 but you'll get it cheaper on Amazon or eBay.
My all-black case packaging bears the same SKU: 77-26379 as shown on the official site - you should probably verify if the official SKU matches exactly with what's on the retail packaging, if you happen to have any issues (maybe you didn't get an original case).
Installation of the Otterbox Commuter case:
1. The case itself comes in 2 parts; the soft TPU-like interior half of the case and the outer hard-shell plastic case. You need to install them separately.
2. You need to put the soft case on your phone first. Make sure that the lip of the soft case is positioned evenly all around the screen of your phone - this is important as it will ensure a perfect fit when you put on the hard-shell case.
3. Now, you can put on the hard-shell case, starting from the bottom of the phone, where micro-USB flap is located. I found it easier to start from there and then press the hard case onto the phone as i worked my way up to the top of the phone. You will likely have a little trouble to get a perfect fit right away. The trick is to push the hard case near the top and bottom of the phone, and try to open the flaps so that the hard case can fit otherwise the closed flaps will get in the way. You can just use your nail to pry open each flap, as you continue to push the hard case on. Once you have the flaps open, you can then squeeze the case all around the phone to make sure that hard case fits perfectly, before you finally close the flaps. You should now have your Otterbox Commuter case installed correctly.
Note: I have a screen protector on my phone and it never interfered with the installation of the case. The inner soft case lip wrapped around the edges of the screen nicely and didn't peel off or affect the screen protector in any way.
What make this case special?
1. The case gives a solid and comfortable feel. I am much less worried with this case on my phone, knowing that the fragile aluminium device is protected from any accidental drops and dust. The case is light-weight considering all the protection it offers and it doesn't add too much bulk to the phone. The HTC One's back is naturally curved and the Commuter case retains that aspect of the phone - some cases make the back completely flat.
2. The cut-outs are perfect. Protection has been considered for every part of the phone. Only the power button is left uncovered so as to allow the IR blaster to function normally. The microphone at the bottom, the noise cancelling mic on the back and especially the beautiful case design around the camera and flash give the case a stunning look.
3. The volume buttons are completely protected by the inner soft case and they have to be one of the best i've ever tested on the HTC One. They protrude slightly from the right-side of the case for easy access as you can just feel them without having to look at the phone to find the volume buttons. The soft buttons feel just right - you won't accidentally press them while holding the phone or while it's in your pocket and they are not hard to press either. They have this nice clicky feel to them and are responsive.
4. The lip on the front of the case has a nice sharp angular design. It grips the sides of the phone firmly and doesn't come off easily - not unless you remove the hardshell case first. When placing the phone face-down on any flat surface, your screen should be fine. The front lip forms part of the soft TPU-like inner case, and it prevents your phone from sliding if you were to put it face-down on an inclined (even if it's polished) surface. I tried it and the phone won't budge easily.
5. The earphone's jack port and micro-USB port are protected against any dust and are easily accessible. Opening and closing these flaps is easy. Just use your finger or a little nail-prodding to open the TPU flaps quickly (there is a tiny gap right under the flaps that enable you to wedge your nail into it) and then push the flaps back into place when you no longer need access to those ports. The soft TPU material that make up the flaps are held securely in place as they are squeezed in between the hardshell case cut-outs, so the flaps won't open even if you shake your phone or if it drops.
6. There is a groove where the power button of the One is situated - this allows very easy and intuitive access to the power button and doesn't block its IR transmission. Normally, without a case on, it can be a little difficult to find the power button without looking at the phone.
7. The hard-shell case is actually of a light grainy texture, which makes it even more scratch-resistant. I tried to scratch it with keys and coins but no change, although it will surely scratch if you use something sharp like a knife - but then, i don't see why you would put an open knife in your pocket with your phone. You'll likely get yourself stabbed in the leg before it affects your phone. :laugh:
I've added some pictures below. I think that real pictures of the case give way more accurate descriptions of the actual case than what you see on the official site (usually these are graphic renders and the color reproduction isn't always accurate). By the way, as i mentioned above, i've got a screen protector on, so in the pictures, the phone screen might appear a little bit glossy from the slanted viewing angles. It's not the screen protector that came with the Otterbox. I had that screen protector installed at the shop when i bought the phone. It's just a generic screen protector but it looks fine to me, so i haven't removed it.
I did some research on which color to get before placing my order for the Otterbox Commuter. Initially, i wanted to get the Glacier color, with its inner black and outer greyish hard-shell case. However, from pictures shared by those who bought the Glacier case, the hardshell is actually white. The other color options for the Commuter case are also actually a bit washed out or pale when compared to the pictures on the official site, so the colored cases are not as striking (in my opinion). I eventually decided to go with the all-black case to be sure that i'd get the same color as i would expect.
Verdict: Overall, i'm very pleased with the all-black case. If i had to do any nitpicking on the Otterbox Commuter case (other than the inaccurate representation of the colored cases on the official Otterbox site, which in reality are much lighter in color), it's the power button which could have also been protected whilst enabling the IR blaster to function, using the ingenious design on the UAG case for the HTC One.
UPDATE: Otterbox Commuter v/s UAG
I recently bought the UAG (Aero) case for my HTC One, in order to have a better hands-on comparison with the Otterbox Commuter case.
I have used the UAG case on my HTC One for a week to test it thoroughly and here's my honest review:
The UAG case is probably the best alternative to the Otterbox Commuter case. Both cases offer great protection, have good ergonomics and nice design. However, there are some distinct differences between these two popular HTC One cases:
Positive features of the Otterbox Commuter case v/s the UAG case:
- The headphone jack port and microUSB port are completely protected against dust with the rubber flaps, which open and close easily. In the UAG case, these ports are open. This is the most important difference between these two top cases for the HTC One. If you want maximum protection and you have to choose between those two cases, go for the Otterbox Commuter as it will keep your One's ports clean from dust and other small solids/debris and prevent clogging these ports in the long run (the rubber flaps are a tight fit, so they might even be able to guard against an occasional water splash although i wouldn't recommend testing that deliberately, as the case has no official certification for water resistance).
- less rugged appearance, if you want a case which offers great protection but is more discreet and elegant at the office, with a more subtle appearance. The design around the camera and flash are a nice additional touch relative to the UAG case, where the camera and flash cut-outs are simple.
- retains the original curved back shape of the HTC One while the UAG makes the back of the One completely flat (this is subject to your own liking as some people might prefer the more comfortable curved back of their HTC One when holding it and others might prefer their HTC One to rest flat on a surface without rocking from side to side when using it).
Negative features of the Otterbox Commuter case v/s the UAG case:
- the power button is unprotected. This is probably the biggest gripe compared to the UAG case, which uses a nice design to cover the power button with a cut-out on top, to allow the IR blaster built into the power button, to function normally.
- the design of the UAG case is more distinctive, especially on the back. You can identify it easily (unless you're using a dual color Commuter case, which also gives a unique look). For most people, their first impression when looking at the back of the UAG case, would usually be "built to resist tough conditions", like at a construction site, etc.
- makes the back of the phone completely flat. This might be desirable to some people.
- If you are someone who cares about how quickly you can remove your case, then the UAG can save you a few seconds, as the Otterbox Commuter comes in two parts, so you have to remove the hard case first before removing the inner soft TPU case. The UAG comes in a single piece and you can just pop it out if you like to change cases on the fly while you're out and about. But this is probably a very minor (if worthy at all) argument in UAG's favor.
- the actual colour combination cases don't match what you see on the official site in the graphic renders - the real colours tend to be pale or washed out, except for the all-black Commuter case which looks identical. The colours of the UAG cases, on the other hand, match perfectly. I got the Aero color, which is a dark blue and i was pleasantly surprised as it's a unique colour among all my other cases.
If you like this review, just hit the "THANKS" button! :highfive:
I just received mine today! i ordered the steel blue, which actually is like a cyan.
i really like the case, as unfortionatlly the USB port always gets dirty its very good for this purpose, and it's very light weight too!
i had the original HTC flip case, and SPECK with kick stand, they are larger, less protection and worse grip.
Highly Receommended.
I had the white one for a day. The black one definitely looks nicer. However, I took it back because I have been caseless so long that this added so much bulk (compared to what I am used to.) I dropped my phone 2 days after taking it back, bad luck I guess. Overall, the case doesn't add very much bulk, I just couldn't stand any at all after using it naked for so long.
I've had a Commuter on my One since about 3 days after getting it, and I love it. Definitely not too bulky, and the grip is excellent. The One is like a wet bar of soap with no case. I've dropped it twice, and both times picked it up, dusted it off, and went right back to regular use.
I have had the commuter for 3 months.
I Have dropped my ONE often and thankfully with the commuter case on. The case is not bulky yet does its job for sure. The rubber on the case takes all the impact. I like the extra rubber on the corners as well,, seems to be the place where my phone hits most often when dropped.
Majority of drops are from the couch or bed onto hardwood floors. I have had a good amount of drops in the outdoors at work while standing up as well and onto concrete and blacktop. So far so good!! The Commuter handles my line of work (construction) very well. I added the Mime Ghost screen protector a few days ago and it makes the combo even more AWESOME :good:
Thanks for the review, I've been considering the commuter case, as well as the black/gray/black OEM case here, but I can't seem to find that color to purchase.
I like the case also. The belt clip sucks. Can some one recomend a belt pouch.
Sent from my HTC One using xda app-developers app
peteschlabar said:
Thanks for the review, I've been considering the commuter case, as well as the black/gray/black OEM case here, but I can't seem to find that color to purchase.
Click to expand...
Click to collapse
That red-grey-black case is not OEM - it is actually the official hardshell case for the HTC One called the Double Dip. It's available on Amazon or eBay. It's only available in those three-color combination. If you see any similar case design in any other colors, you're not getting an original HTC One case. I wouldn't advise you to get that case though, as it has been widely reported that it will scratch the sides of your phone as you slide it into the main wrap-around case (the scratches caused by the very-tight case is especially visible if you have a non-silver colored HTC One). Also, the Double Dip case doesn't offer the same high level of protection as the Commuter case, which consists of a hardshell wrapped around a layer of soft TPU-like impact-resistant material. The only advantage of the Double Dip, in my opinion, is the added protection of the speaker grills, which can be prone to scratches, since the grills are also made of aluminium and coated with the same paint as the rest of the phone (unless you get the silver version where scratches aren't that visible).
coldsteal said:
I like the case also. The belt clip sucks. Can some one recomend a belt pouch.
Click to expand...
Click to collapse
I think this might be exactly what you're looking for, as it fits the Commuter and Defender cases for the HTC One: http://www.amazon.com/LEATHER-POUCH...1379675221&sr=8-5&keywords=htc+one+belt+pouch
Thanks, just ordered it.
Thanks !! Just placed the order.
electronical said:
That red-grey-black case is not OEM - it is actually the official hardshell case for the HTC One called the Double Dip. It's available on Amazon or eBay. It's only available in those three-color combination. If you see any similar case design in any other colors, you're not getting an original HTC One case. I wouldn't advise you to get that case though, as it has been widely reported that it will scratch the sides of your phone as you slide it into the main wrap-around case (the scratches caused by the very-tight case is especially visible if you have a non-silver colored HTC One). Also, the Double Dip case doesn't offer the same high level of protection as the Commuter case, which consists of a hardshell wrapped around a layer of soft TPU-like impact-resistant material. The only advantage of the Double Dip, in my opinion, is the added protection of the speaker grills, which can be prone to scratches, since the grills are also made of aluminium and coated with the same paint as the rest of the phone (unless you get the silver version where scratches aren't that visible).
I think this might be exactly what you're looking for, as it fits the Commuter and Defender cases for the HTC One: http://www.amazon.com/LEATHER-POUCH...1379675221&sr=8-5&keywords=htc+one+belt+pouch
Click to expand...
Click to collapse
electronical said:
That red-grey-black case is not OEM - it is actually the official hardshell case for the HTC One called the Double Dip. It's available on Amazon or eBay. It's only available in those three-color combination. If you see any similar case design in any other colors, you're not getting an original HTC One case. I wouldn't advise you to get that case though, as it has been widely reported that it will scratch the sides of your phone as you slide it into the main wrap-around case (the scratches caused by the very-tight case is especially visible if you have a non-silver colored HTC One). Also, the Double Dip case doesn't offer the same high level of protection as the Commuter case, which consists of a hardshell wrapped around a layer of soft TPU-like impact-resistant material. The only advantage of the Double Dip, in my opinion, is the added protection of the speaker grills, which can be prone to scratches, since the grills are also made of aluminium and coated with the same paint as the rest of the phone (unless you get the silver version where scratches aren't that visible).
I think this might be exactly what you're looking for, as it fits the Commuter and Defender cases for the HTC One: http://www.amazon.com/LEATHER-POUCH...1379675221&sr=8-5&keywords=htc+one+belt+pouch
Click to expand...
Click to collapse
Thanks for the info, I had read about the scratches. I don't understand about the color choices though. It clearly shows on HTC's website that there are two color options, but the only one available for purchase (that isn't a knock off) is the red and gray.
peteschlabar said:
I don't understand about the color choices though. It clearly shows on HTC's website that there are two color options, but the only one available for purchase (that isn't a knock off) is the red and gray.
Click to expand...
Click to collapse
HTC only ever made two official cases for the HTC One:
1. http://www.htc.com/www/accessories/htc-double-dip/
2. http://www.htc.com/www/accessories/htc-double-dip-flip/
Are you referring to the second Double Dip Flip case? There are no other official alternatives (not even in color) that exist.
I personally don't trust non-branded cases, as they tend not to fit properly and sometimes even worse - they can scratch your phone due to poor fitting and/or poorly built with low quality materials (the aluminium unibody of the HTC One is especially vulnerable).
electronical said:
HTC only ever made two official cases for the HTC One:
1. http://www.htc.com/www/accessories/htc-double-dip/
2. http://www.htc.com/www/accessories/htc-double-dip-flip/
Are you referring to the second Double Dip Flip case? There are no other official alternatives (not even in color) that exist.
I personally don't trust non-branded cases, as they tend not to fit properly and sometimes even worse - they can scratch your phone due to poor fitting and/or poorly built with low quality materials (the aluminium unibody of the HTC One is especially vulnerable).
Click to expand...
Click to collapse
No, I'm talking about the regular Double Dip case, not the flip. If you look through the photos, there is a pic of the black/gray/black color, and if you click on the Specs tab, look in the color section; it is listed there as an option.
http://www.htc.com/www/accessories/htc-double-dip/#specs
Edit: I apologize the the OP, this is getting off topic for this thread.
peteschlabar said:
No, I'm talking about the regular Double Dip case, not the flip. If you look through the photos, there is a pic of the black/gray/black color, and if you click on the Specs tab, look in the color section; it is listed there as an option.
http://www.htc.com/www/accessories/htc-double-dip/#specs
Edit: I apologize the the OP, this is getting off topic for this thread.
Click to expand...
Click to collapse
I hadn't noticed that HTC put up a second color-combination Double Dip case as available on its website - that's probably because it was never released (from what i found).
Here's a thread about that elusive black/gray/black version: http://forum.xda-developers.com/showthread.php?t=2255928
If you go through the replies in that thread, you'll find someone got that color-combination on eBay and even provided a link. But i seriously doubt that it's official HTC One gear (too many color variations available from the drop-down list).
Also, on the official site, have a look at the reviews (they do mention that the black/gray/black color is unavailable): http://www.htc.com/www/accessories/htc-double-dip/#ratings
electronical said:
I hadn't noticed that HTC put up a second color-combination Double Dip case as available on its website - that's probably because it was never released (from what i found).
Here's a thread about that elusive black/gray/black version: http://forum.xda-developers.com/showthread.php?t=2255928
If you go through the replies in that thread, you'll find someone got that color-combination on eBay and even provided a link. But i seriously doubt that it's official HTC One gear (too many color variations available from the drop-down list).
Also, on the official site, check the reviews section and have a look at the top comment: http://www.htc.com/www/accessories/htc-double-dip/#ratings
Click to expand...
Click to collapse
Thanks for the link, I think I'm just going to end up with the Commuter
Loving this case so far. It looks amazing on the red HTC One.
alxrock said:
Loving this case so far. It looks amazing on the red HTC One.
View attachment 2275181
Click to expand...
Click to collapse
The combo does look GOOD!!
I've used this case for about a month. The rubber side wall next to the USB port is now stretched out and a little loose. I contacted otter box, sent pictures and now have a replacement on the way. Hopefully the new rubber piece holds up better this time around near the USB port.
I have the Cimo Grip case, the Black TPU Verizon Gel Case, and the Radioshack hard clear plastic snap case. The otter box commuter case is my favorite of them all
BygSii said:
I've used this case for about a month. The rubber side wall next to the USB port is now stretched out and a little loose. I contacted otter box, sent pictures and now have a replacement on the way. Hopefully the new rubber piece holds up better this time around near the USB port.
I have the Cimo Grip case, the Black TPU Verizon Gel Case, and the Radioshack hard clear plastic snap case. The otter box commuter case is my favorite of them all
Click to expand...
Click to collapse
I have had mine for 3-4 months now and no stretchy. I have a ruff line of work and hard on my stuff too.
Only problem with mine is it tends to attract lint/ dirt on the inside of the case however it is very easy to clean
Great review! I have the white and grey otterbox that I've only used a few times to work out. I had the uag on my previous phone and I liked the protection and the fact that it was easy to put on and take off. Would anyone want to trade for a case? Preferably the uag
Sent from my HTC One using xda app-developers app
Not gonna lie. I know there are a few threads claiming that they have the "best leather case", and perhaps they are very good, but the one I ordered is also very top notch.
I ordered the case through here.
The package came in about a week, which is pretty decent. The case has a dual tone leather, brown and black, and the stitching pattern looks like a book. The back has a camera hole and speaker holes. It also has this little attachment at the back that I have no idea what is for. The leather is PU leather. The leather is also pretty darn thick too.
The inside has card holders, a strap for your hand when you're holding the case with the front flap flipped to the back, and two holder things I don't know what's for, but I bet for creative people you'll find a way to use it.
The pouch for the tablet is very secure, more secure than the other leather case I have. Normally cases have this plastic thing that snaps on to your Nexus 7, This case, however, has a stitched leather pouch around the tablet, and it has a velcro thing to secure the tablet in place so it can't slide out. The case has a hole in the front for the little LED light thing. The case also has a smart cover.
I've had this for about 2 weeks and I'm very happy with it. I highly recommend this to anyone looking for a sophisticated leather case!
Ya the case does look sexie
Its look quite ok ok but not much impressive or elegant one...not a shopping material....
PU "leather" is in no way, shape or form actual leather. It is a disingenuous term used to confuse the buyer into thinking "PU" is a type of leather, which it is not. PU stands for polyurethane, which is plastic. Not leather. :good:
Its now, $8.99!