Hi there. I have been searching about these metal pins behind note 4 well I couldn't find exactly what i was looking for.
can anyone label these metal connecting pins.
abeer_abid said:
Hi there. I have been searching about these metal pins behind note 4 well I couldn't find exactly what i was looking for.
can anyone label these metal connecting pins.
Click to expand...
Click to collapse
I believe those are the connections for a wireless charging battery cover.
Sent from my SM-N910P using XDA Premium HD app
DreamingWolf said:
I believe those are the connections for a wireless charging battery cover.
Sent from my SM-N910P using XDA Premium HD app
Click to expand...
Click to collapse
thanks for the reply but I have checked only top right and middle left are for wireless charging. I'm not sure for others.
abeer_abid said:
thanks for the reply but I have checked only top right and middle left are for wireless charging. I'm not sure for others.
Click to expand...
Click to collapse
They may be for antenna connections?? To boost the antenna maybe?
Sent from my SM-N910P using Tapatalk
I think they are for the LED Cover.
Galaxy Note 4 LED Cover
Related
Is it just me.. Or does the charger keep falling out too easily from the charging port?
I haven't damaged it or treated it wrong.. It keeps falling out easily when I pick up the device.
I have tried the supplied white cable.. And still had my galaxy s3 cable.. Does same.
Anyone else.?
Sent from my GT-N7100 using xda app-developers app
scaredofgirls said:
Is it just me.. Or does the charger keep falling out too easily from the charging port?
I haven't damaged it or treated it wrong.. It keeps falling out easily when I pick up the device.
I have tried the supplied white cable.. And still had my galaxy s3 cable.. Does same.
Anyone else.?
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Nope, it's a pretty snuggle fit for me.
AjunNg said:
Nope, it's a pretty snuggle fit for me.
Click to expand...
Click to collapse
x2 mines actually pretty tight to get out
Yeah l'm facing the same problem since day 1.
Sent from my GT-N7100 using xda app-developers app
yes, same for me.
Skickat från min GT-N7100 via Tapatalk 2
yea, it's annoying.
+1 for loose
+1 Same here
I've just trimmed a small amount of the plastic casing off the cable to make it sit better (which it does now) the angle of the bezel causes the cable not to sit fully into the port.
Sent from my GT-N7100 using Tapatalk 2
Mine too .
Sent from my GT-N7100 using xda premium
On inspection, I've noticed that the port is recessed quite far back into the phone. I'm hoping it's just a problem for a few handsets. I called three today and they're sending me another Note 2. Let's see if this one is any better.
No problems here. Did you try any other micro usb cable.. some fit better than others
Yep it's rubbish. The plug needs to be longer. The socket is too recessed. Easy enough to remove some of the casing of an old usb lead. Will update, to see how well it works.
Sent from my GT-N7100 using xda app-developers app
As I mentioned in my previous post, trimming a cable a bit works just fine.
Sent from my GT-N7100 using Tapatalk 2
davestix said:
On inspection, I've noticed that the port is recessed quite far back into the phone. I'm hoping it's just a problem for a few handsets. I called three today and they're sending me another Note 2. Let's see if this one is any better.
Click to expand...
Click to collapse
You got them to send you another one because of this problem?
Perhaps I should take my sim free - back to carphone warehouse?..hmmm i got 14 days..to see.
RavenY2K3 said:
As I mentioned in my previous post, trimming a cable a bit works just fine.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Worked just fine, thx for the tip.
Skickat från min GT-N7100 via Tapatalk 2
Mine too. Keeps falling off every now and then. I bought HDTV adapter (the Samsung proprietary one for the S3) and that has a much longer micro usb and that fits in tight. I read somewhere that samsung has modified the micro USB port (some 5 pin connector or something like that, for the MHL) could it be because of that?
scaredofgirls said:
You got them to send you another one because of this problem?
Perhaps I should take my sim free - back to carphone warehouse?..hmmm i got 14 days..to see.
Click to expand...
Click to collapse
Yeah. I have a feeling that note all handsets are like this. If they were this thread would be flooded.
Sent from my GT-N7100 using xda premium
RavenY2K3 said:
As I mentioned in my previous post, trimming a cable a bit works just fine.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
What do you mean by trimming the cable? Can you please post a picture to your cable?
My cable sits snug u can actually dangle the phone from the lead and it stays in!
Sent from my GT-N7100 using XDA Premium HD app
Is the note 2 going to support wireless charging? I've been wondering this since the SIII has it...
If the S3 has it the note 2 certainly has it too.
Sent from my GT-N7100 using xda premium
supramon said:
If the S3 has it the note 2 certainly has it too.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
That's what I though but why didn't they mention it at the keynote? Maybe it's going to be an alternative accessory battery cover?
duykhang524 said:
Maybe it's going to be an alternative accessory battery cover?
Click to expand...
Click to collapse
Could be. Looking at the back of my note 2 with the back cover off there are a some unused contacts. The top two are for the NFS thing on the back cover but the bottom two don't line up with anything.
I like to use dust plugs on my devices to preserve their functionality. I am unable to find a dust plug specifically for the Samsung proprietary plug. There is one from China, but I really don't like ordering products from overseas.
Has anyone used the iPhone proprietary dust plug? It seems like it might fit, not sure.
All I know is that I tried a apple av cable on my 10.1 and the plug didn't fit.
mickfitz said:
All I know is that I tried a apple av cable on my 10.1 and the plug didn't fit.
Click to expand...
Click to collapse
Thats because the "tongue" where the pins are does not line up with the "rails" where the connector slides in.
OP depending on where how detailed the cover is (ie whether it has rails and a tongue or just a tongue or just rails etc) will determine whether it fits
Sent from my Nexus 4 using xda app-developers app
younix258 said:
Thats because the "tongue" where the pins are does not line up with the "rails" where the connector slides in.
OP depending on where how detailed the cover is (ie whether it has rails and a tongue or just a tongue or just rails etc) will determine whether it fits
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Why not just get this one from hk?
http://www.ebay.com/itm/30Pin-Charg...ote-10-1-N8000-N8010-/251124866741#vi-content
I bought one of these for iPads, fits perfect.
Sent from my GT-N7105 using xda premium
Sorry it was sold for iPhone not iPad.
Sent from my GT-N7105 using xda premium
Bjs051084 said:
Sorry it was sold for iPhone not iPad.
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
Could you give the link?
lazer155 said:
Could you give the link?
Click to expand...
Click to collapse
Search ebay " dust cap iphone 4"
Sent from my GT-N7105 using xda premium
Deleted
May I just advise caution to anyone thinking of doing this. The charger should be held in by the prongs locating properly. By bending the metal it stays in place by pushing against the middle pin which is usually made of plastic and could easily snap leaving you with a much more expensive repair than the cost of a new cable
Sent from my GT-N7105 using xda premium
Deleted.
jrbxx7 said:
Bin that way for months.... no problems...
Sent from my MiUied pen and paper
Click to expand...
Click to collapse
You may want to Google "fatigue crack"
Sent from my GT-N7105 using xda premium
Y not try wireless charging instead?
Sent from my GT-N7100
I've got the wireless charging battery cover from Verizon on my phone. It makes the phone a bit thicker. I was wondering if there were any cases out there that can accommodate the extra size. I currently use a Cruzerlite case that I cut a little bit to allow expansion but I'd like something a bit cleaner.
TIA for any input!
Sent from my Galaxy S3 using Tapatalk 4
You can get wireless charging inlays that fit inside the original battery lid and as such don't increase the thickness of the device
Interesting, never heard of that. Do you have a link?
Sent from my Galaxy S3 using Tapatalk 4
my95z34 said:
Interesting, never heard of that. Do you have a link?
Sent from my Galaxy S3 using Tapatalk 4
Click to expand...
Click to collapse
They're practically impossible to miss, just search ebay or any number of other places for "s3 qi inlay"
Has anyone experienced any issues with the inlays? I just got a wireless qi charger and the Verizon rear case for the phone and have just been putting up with the added thickness. I wouldn't mind considering the inlays though.
Sent from my SCH-I535 using XDA Premium 4 mobile app
They make it a bit thicker and bow the back out very slightly.
To those who currently have a qi wireless charger. Few questions as I'm about to get one.. Does the charging pad get warm? Is it ok to keep plugged in or could it be a possible fire hazard? Stupid question, I know, but I have a hard time trusting cheap stuff from china, lol. Does wireless charging charge as fast as USB? Thanks!
Sent from my SGH-T999 using xda app-developers app
MiG8GT said:
To those who currently have a qi wireless charger. Few questions as I'm about to get one.. Does the charging pad get warm? Is it ok to keep plugged in or could it be a possible fire hazard? Stupid question, I know, but I have a hard time trusting cheap stuff from china, lol. Does wireless charging charge as fast as USB? Thanks!
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Occasionally. Yes it's fine. And it depends on the pad and the receiver on your phone. Mine is 650mA so it's slightly faster than USB
Sent from my Galaxy S3 using Tapatalk 4
Thanks! I'll order one tonight, can't wait to get it!
Sent from my SGH-T999 using xda app-developers app
MiG8GT said:
Thanks! I'll order one tonight, can't wait to get it!
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I wouldn't skimp on the stuff tho. I spent like $50 for my charging pad. Its got two spots and it's made by Energizer.
Sent from my Galaxy S3 using Tapatalk 4
the pad can get warm but it's fine.
it's not going to blow up or anything.
you can also keep an eye out for the dt500 charging pad that nokia has for the lunia series. they go on sale often for $25.
Sent from my GT-I9300 using xda app-developers app
MiG8GT said:
To those who currently have a qi wireless charger. Few questions as I'm about to get one.. Does the charging pad get warm? Is it ok to keep plugged in or could it be a possible fire hazard?
Click to expand...
Click to collapse
1. Slightly warm when in use.
2. Yes, it's fine to leave it plugged in. My one at my office desk sits on top of a pile of papers and hasn't set anything on fire yet.
I personally own this receiver (which I use with this pad, though my pads are black rather than white), which works well though my lifeproof case. No dice with the Otterbox Armour case though.
I'd recommend avoiding this charger. It doesn't work worth a damn through a case and constantly connects/disconnects.
I have the same receiver inlay as compo01, using it with a variety of pads, including an official Samsung S4 one that I modded into an ugly but functionally awesome dock
MiG8GT said:
To those who currently have a qi wireless charger. Few questions as I'm about to get one.. Does the charging pad get warm? Is it ok to keep plugged in or could it be a possible fire hazard? Stupid question, I know, but I have a hard time trusting cheap stuff from china, lol. Does wireless charging charge as fast as USB? Thanks!
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I have the ghost charger that they sell at Verizon. I woke up this morning and my phone showed 116 F. Is that super hot for a phone?
Sent from my SCH-I535 using XDA Premium 4 mobile app
I should add I'm running CM 10.1 latest stable build.
seems unnaturally hot... is there any metal in between your phone and the charger?
Sent from my GT-I9300 using xda app-developers app
tomster2300 said:
I have the ghost charger that they sell at Verizon. I woke up this morning and my phone showed 116 F. Is that super hot for a phone?
Sent from my SCH-I535 using XDA Premium 4 mobile app
I should add I'm running CM 10.1 latest stable build.
Click to expand...
Click to collapse
Yeah, that's really hot. The highest I've ever seen when charging is 36c (96.8f).
Sent from my Galaxy S3 i747m
mputtr said:
seems unnaturally hot... is there any metal in between your phone and the charger?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I have a thin rubber case that goes around the back and sides. I took it off the charger this morning and it was at 100 F.
Sent from my SCH-I535 using XDA Premium 4 mobile app
tomster2300 said:
I have a thin rubber case that goes around the back and sides. I took it off the charger this morning and it was at 100 F.
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
my phone gets warm during the initial charging but once it hits 100% it cools down real fast. I can think of only one other thing in this case.. you might not be aligned correctly.. but i would not think that's the case since you seem to be able to get to 100% with no problem...
I have the Verizon and the monster watts WiQiQi kit. I mainly use the Verizon back cover even though it means I can't put a case on. The WiQiQi is a nice kit but when I use it with my preferred case, one with a stand , The screen distorts and bulges. But I put the WiQiQi in my fathers phone with an otterbox and he has no issues.