Hi Guys
This is a n00bish post so please excuse if in wrong forum section. If so please redirect.
I was having really bad battery issues after the last O2 OTA update and my micro USB is borked. Requires me to wiggle and prop USB cable up to get the charger to work. Such a pain. I thought this may due to firmware / OS as it may have been linked to other battery issues. I think this may be due to hardware damage. and a separate issue. I am going to return to HTC but have installed a custom ROM Viper 3.2.
The battery issues have been resolved (still having charging issues possible hardware damage / fault).
After I installed Viper I realised my WiFi no longer worked.
Basically I would like the correct firmware and possibly stock OS ( Any OS that makes WiFi work is good for now)
I have been through quite a bit of searching and trial and error but cant seem to find the right firmware and stock image to to run on my M8.
This is o2 UK specific. A O2 UK RUU would be super.
Phone details
...
(bootloader) cid: O2___001
OKAY [ 0.001s]
finished. total time: 0.002s
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.54.206.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA45BWM02810
(bootloader) imei: Mod edit: IMEI removed
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
odeatomas said:
Hi Guys
This is a n00bish post so please excuse if in wrong forum section. If so please redirect.
I was having really bad battery issues after the last O2 OTA update and my micro USB is borked. Requires me to wiggle and prop USB cable up to get the charger to work. Such a pain. I thought this may due to firmware / OS as it may have been linked to other battery issues. I think this may be due to hardware damage. and a separate issue. I am going to return to HTC but have installed a custom ROM Viper 3.2.
The battery issues have been resolved (still having charging issues possible hardware damage / fault).
After I installed Viper I realised my WiFi no longer worked.
Basically I would like the correct firmware and possibly stock OS ( Any OS that makes WiFi work is good for now)
I have been through quite a bit of searching and trial and error but cant seem to find the right firmware and stock image to to run on my M8.
This is o2 UK specific. A O2 UK RUU would be super.
Phone details
...
(bootloader) cid: O2___001
OKAY [ 0.001s]
finished. total time: 0.002s
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.54.206.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA45BWM02810
(bootloader) imei: Mod edit: IMEI removed
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Hi there. I can't really help with your problem, I'm only posting here because I was assigned to move your thread from the general section to the q&a section. I did notice that you included your IMEI number in your post, I've removed it for you, don't ever post your IMEI publicly, or tell anyone what it is. Your IMEI is a unique device identifier, if it falls into the hands of the wrong people they can cause all sorts of problems for you. Anyway, good luck with your problem, just wanted to give you that advice.
odeatomas said:
Basically I would like the correct firmware and possibly stock OS ( Any OS that makes WiFi work is good for now)
I have been through quite a bit of searching and trial and error but cant seem to find the right firmware and stock image to to run on my M8.
This is o2 UK specific. A O2 UK RUU would be super.
Click to expand...
Click to collapse
You can update the firmware or a stock ROM (that matches your current firmware) but you don't need to do both.
I don't think your version has an RUU (many don't).
The stock ROM that matches your current firmware is 1.54.206.5, as determined by main version on your getvar output. The stock nandroid for 1.54.206.5 can be found on the following thread (with instructions to restore found in Post #3 of that thread, under Questions & Answers):
http://forum.xda-developers.com/showthread.php?t=2701376
Also, trial and error while flashing firmware is mostly going to fail, since with s-on you can only flash a firmware with "206" in the third number position (x.xx.206). Also, you need to have the bootloader relocked.
Additionally, I'm not sure how warranty is handled where you are. But in many places, its best practice when returning phone for warranty to s-off (by sunshine) and change the bootloader to LOCKED. UNLOCKED or RELOCKED bootloader in many places will void the warranty. The only way to make it back to LOCKED is with s-off.
odeatomas said:
Hi Guys
This is a n00bish post so please excuse if in wrong forum section. If so please redirect.
I was having really bad battery issues after the last O2 OTA update and my micro USB is borked. Requires me to wiggle and prop USB cable up to get the charger to work. Such a pain. I thought this may due to firmware / OS as it may have been linked to other battery issues. I think this may be due to hardware damage. and a separate issue. I am going to return to HTC but have installed a custom ROM Viper 3.2.
The battery issues have been resolved (still having charging issues possible hardware damage / fault).
After I installed Viper I realised my WiFi no longer worked.
Basically I would like the correct firmware and possibly stock OS ( Any OS that makes WiFi work is good for now)
I have been through quite a bit of searching and trial and error but cant seem to find the right firmware and stock image to to run on my M8.
This is o2 UK specific. A O2 UK RUU would be super.
Phone details
...
(bootloader) cid: O2___001
OKAY [ 0.001s]
finished. total time: 0.002s
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.54.206.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: removed
(bootloader) imei: Mod edit: IMEI removed
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
First things first, since I represent Venom ROMs. Your wifi didn't work because you firmware is super old.
Secondly, you extSD is probably borked because you skimped and bought a cheap one. They don't last long.
You USB charging issues are either bad cable, charger, or charging port. The first two are easy fixes, the last is something you'll have to get repaired by a shop or HTC.
You'll have to go back to stock to update being S-On. If you can find a stock backup (or if you have one yourself ~ you should just sayin....) Yo can restore that and get the OTA.
After the OTA is downloaded, copy it from your phone to your PC (it's in the sdcard/download folder probably) and open it with 7zip.
Find the firmware.zip and unzip it. The recovery.img is in there.
Place the .img into your fastboot folder.
Hook up you phone to your PC and get into fastboot (obviously), and enter fastboot flash recovery recovery.img
Then fastboot reboot and disconnect your phone.
Now that you have the stock ROM and recovery, you should be able to flash the stock OTA.
thanks guys all sorted
had the recovery in slightly wrong folder needed to have device serial as the parent folder.
All back to stock and ticking over nicely
Heisenberg said:
Hi there. I can't really help with your problem, I'm only posting here because I was assigned to move your thread from the general section to the q&a section. I did notice that you included your IMEI number in your post, I've removed it for you, don't ever post your IMEI publicly, or tell anyone what it is. Your IMEI is a unique device identifier, if it falls into the hands of the wrong people they can cause all sorts of problems for you. Anyway, good luck with your problem, just wanted to give you that advice.
Click to expand...
Click to collapse
Removing the serial# would also be a good idea.
xunholyx said:
Removing the serial# would also be a good idea.
Click to expand...
Click to collapse
The serial number isn't really a big issue like the IMEI is, the shady types can't really do anything with that.
Related
Hi,
I realise this is a fairly basic question but I am completely out of ideas on how to fix my HTC One.
Basically, I had a fully working phone, but after some flashing, rooting and general messing my phone does nor recongise my sim card, or anyone elses. In fact, when I put in my sim card it says 'tap to complete set up' but the networks that come up are not my own. (proximus, tesco mobile and one other I can't recall.)
I'm looking for a way to revert my phone to complete stock, factory mode, locked, etc. because I feel this problem is unfixable otherwise.
If anyone has other suggestions please enlighten me, this is becoming beyond a nuisance and I really don;t want to buy another phone.
You might not have to, It seems like the Radio/Modem is corrupt or changed.
Search for a new one on the Development forums and flash it.
I got that message and it wouldn't go away before when i restored the M8 from GPe to Sense using the
firmware file 1.54.401.5-W_Splash.zip
It's problem was mostly a radio problem. i recommend to flash RUU 3.28.401.7.
Try this:http://forum.xda-developers.com/htc-one-m8/development/ota-3-28-401-6-t2899900
as always do research before flashing.
seanayk said:
Hi,
I realise this is a fairly basic question but I am completely out of ideas on how to fix my HTC One.
Basically, I had a fully working phone, but after some flashing, rooting and general messing my phone does nor recongise my sim card, or anyone elses. In fact, when I put in my sim card it says 'tap to complete set up' but the networks that come up are not my own. (proximus, tesco mobile and one other I can't recall.)
I'm looking for a way to revert my phone to complete stock, factory mode, locked, etc. because I feel this problem is unfixable otherwise.
If anyone has other suggestions please enlighten me, this is becoming beyond a nuisance and I really don;t want to buy another phone.
Click to expand...
Click to collapse
Can you post the output of using fastboot getvar all (making sure that you remove the IMEI and serial number) and we can then go from there. Chances the guide is already here somewhere
EddyOS said:
Can you post the output of using fastboot getvar all (making sure that you remove the IMEI and serial number) and we can then go from there. Chances the guide is already here somewhere
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXX
(bootloader) imei: XXXXXXX
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
how's that?
[QRCODE][/QRCODE]
i4GS said:
You might not have to, It seems like the Radio/Modem is corrupt or changed.
Search for a new one on the Development forums and flash it.
I got that message and it wouldn't go away before when i restored the M8 from GPe to Sense using the
firmware file 1.54.401.5-W_Splash.zip
It's problem was mostly a radio problem. i recommend to flash RUU 3.28.401.7.
Try this:http://forum.xda-developers.com/htc-one-m8/development/ota-3-28-401-6-t2899900
as always do research before flashing.
Click to expand...
Click to collapse
Sorry but can you walk me through (or link me to a walkthrough) where to get said file, I don't want to mess with my phone further.
Thanks!
seanayk said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXX
(bootloader) imei: XXXXXXX
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
how's that?
Click to expand...
Click to collapse
Spot on! OK, the guide you need is on my signature. Step 1 you don't need (unless you want to 'lock' the bootloader) so go to step 2 and you should be fine!
EddyOS said:
Spot on! OK, the guide you need is on my signature. Step 1 you don't need (unless you want to 'lock' the bootloader) so go to step 2 and you should be fine!
Click to expand...
Click to collapse
Okay i'm going to give it a go now, I'll keep you updated!
EddyOS said:
Spot on! OK, the guide you need is on my signature. Step 1 you don't need (unless you want to 'lock' the bootloader) so go to step 2 and you should be fine!
Click to expand...
Click to collapse
okay so i've hit an issue, in step two it asks for me to reset my CID to whichever CID it came with. I have no idea what that was, is there any way to find out? Also, I tried change it to one of the CID's you listed and i get the following :
C:\adb>fastboot oem writecid HTC__002
...
(bootloader) Start Verify: 0
(bootloader) Input CID is not super CID
(bootloader) Start Verify: 0
OKAY [ 0.028s]
finished. total time: 0.028s
Thanks again for your responses!
Use HTC__001 (it's the unbranded one on most EU devices). And what you get is normal (it's just elling you yo've not set the CID to Super CID), use the command fastboot reboot-bootloader after you've set the CID to confirm it's been changed
Okay I have good news and bad news!
I did all the above and afterwards I tried a couple of different SIM cards from different cellular networks in my country. The only network I could get working was Vodafone?
Any reason for that? I wouldn't mind but Vodafone is 3 times more expensive than my previous carrier!
Prologue:
So there I was, caressing my shiny and smooth M8.
At the beginning of the year I S-Offed, and added DigitalHigh's awesome Beyond Stock...
Later on, I used a standard RUU GPE Rom.
After repeated Wi-Fi password amnesia, I wanted Beyond Stock Back.
Flashing "GPE_5.1_M8_DH_080215.zip" gives me an "Error 7" even with repeated wipes... hehe... wipes
Searching didn't give me a coherent answer.
So I though, let's update TWRP... and...
Now
The thing's only usable in Bootloader.
If I go to recovery or ANYTHING, the "Google" logo stares at me in disgust.
Odd detail: I'm using fastboot and when it's stuck on the "Google" logo, entering "adb devices" detects the phone in recovery mode.
I flashed TWRP 2.8.7.0, but all I see is the "Google" logo. (I can still feel vibrations on the screen as if I'm hitting a menu button)
I also tried to "fastboot -w" and it gave me the "remote: not allowed" result.
Actually, I tried to fastboot a lot of things and the result came the same.
Anyways, I'll give a detailed log as soon as I remember how, but the reason I post this is 'cause searching for this doesn't give an understandable or reliable result.
Thanks
C:\WINDOWS\system32>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.14.21331931.LA02_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6e0f5a3d
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.057s
Give the output of :
Fastboot getvar all
But delete the serial and imei before posting ! If you have an old bootloader you have to use the 2.7 series of TWRP. if you have the latest bootloader (3.18-3.19) you have to use 2.8 series of TWRP !
OOOOOOOOOHHHH, Where I get new M8 bootloader?
Hold Up, going to work, will post 'getvar' later today.
It's there, brah.
Take a look if you can.
It's an AT&T device, you are using it with AT&T ? And you fully converted it from sense to GPE ? You could also :
1: run the GPE ruu again. It will get you on GPE stock again and since you are s-off that should not be a problem of any kind.
2: convert back to sense (original AT&T with software number x.xx.502.x)
i am not sure if the AT&T RUU will cover the "back to sense conversion" so this might be interesting too as it involves the standalone flashing of the firmware first (you need a AT&T firmware, NOT the one posted there !!!)
here is more conversion info :http://forum.xda-developers.com/showthread.php?t=2733523
and here you can get firmwares : http://forum.xda-developers.com/showthread.php?t=2701376
if you want number 2 here is more info with a download link to the latest android L RUU : http://www.theandroidsoul.com/download-att-htc-one-m8-lollipop-ruu-4-28-502-1-75822/
Didnt want to start my own thread due to the shame..
Hi,,
I have managed to remove my OS, without making a backup. All i have running is TWRP. Was going to install CM12.1, but didnt update the M8 to the latest software that contains relevant bootloader. From here it went downhill - fast.
Ended up with no OS, no backkups, and no ability to flash other ROMS i think.
If someone could give me a few ideas, i would really appreciate it.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXX
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Mike
Sheriff1972 said:
Hi,,
I have managed to remove my OS, without making a backup. All i have running is TWRP. Was going to install CM12.1, but didnt update the M8 to the latest software that contains relevant bootloader. From here it went downhill - fast.
Ended up with no OS, no backkups, and no ability to flash other ROMS i think.
If someone could give me a few ideas, i would really appreciate it.
Click to expand...
Click to collapse
Your case is different and you should start your own thread but there are many same case as yours.
Here is one and the solution is in there.. run RUU - http://forum.xda-developers.com/htc-one-m8/help/os-sos-t3192177
Anything you're not sure, ask there. Don't hijack this thread.
UPDATE: Thanks to ckpv5 and the links that were provided i was able to complete the reinstall - thank you so much!!
Opps - sorry - didnt mean to offend!
Will take a look.
Thanks
Mike
The RUU got me an OS and, right now, that is all I need.
Thank you!!
i have htc one m8 using cm nouget latest but suddenly phone got off because of low battery and after that i am not able to get any signal and my phone is not showing any IMEI and baseband is unknown.
i have tried to install others roms but not succeeded.
i have tried to restore to stock from twrp nandroid backups from below thread but my phone is still showing baseband unknown and not showing any IMEI
https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
my bootloader is unlocked and s-on.
i am trying to find ruu file.
if anyone can help to find ruu file or can tell me how to get rid of this Imei problem(not getting any signal) that would be great
my htc one m8 get var all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT4xxxxxx639
(bootloader) imei: 35244xxxxxxxx19
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B65000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
please help me to get my phone usable .
i can use stock rom or any other rom.
here is the RUU,zip
https://www.androidfilehost.com/?fid=24591000424941691
and here is how to flash do all the steps ( use the RUU from the link above )
http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Htc one m8 whl
I have been facing a trouble with HTC ONE m8 WHL
when the device came to me wireless is working but there is no traffic
I tried to flash the phone but the problem was still but in addition there is no baseband
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0119
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.654.10
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:--------
(bootloader) imei:--------
(bootloader) imei2: Not Support
(bootloader) meid: -------
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B7****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6400afe2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
This is the device information
Anyone can help me please
I tried a lot of RUU flash files kitkat or lolipop when the device is running for the first time
hands free activation was required and i passed it throw up the TWRP recovery
snow_man026 said:
I have been facing a trouble with HTC ONE m8 WHL
I tried a lot of RUU flash files kitkat or lolipop when the device is running for the first time
Click to expand...
Click to collapse
You shouldn't be trying "a lot" of RUUs. You should be trying only the correct RUUs for the Sprint M8. Flashing RUUs for other versions is dangerous, and can lead to permanent damage to the Sprint version M8.
https://forum.xda-developers.com/showthread.php?t=2729173
Did you buy this phone? And you received it with cell data not working? If so, you should return it to the seller (if possible) rather then messing around with it (possibly breaking it worse, and voiding any possibility of return to the seller).
Also, you should delete IMEI, serial number, and MEID from your post. These are unique to the device, and should never be posted online.
All the RUU files that i had tried for the same model ONE M8 WHL
No I didn't buy the phone but it's my job to make a software for the phones
When I received the phone cell data was working but the problem was there is no traffic when you turned on the wireless
But my problem now there is "no baseband"
snow_man026 said:
All the RUU files that i had tried for the same model ONE M8 WHL
Click to expand...
Click to collapse
This still doesn't tell me which RUUs you tried. There are 14 RUUs on the thread I linked. Which ones exactly did you try, and in what order? Did you use the exe or zip method (and if the latter, was it by htc_fastboot, or SD card method)? Did the RUU(s) install completely and successfully, or were there error messages? If there were error messages, what did they say exactly?
Basically, your posts are short on details. You should be specific and detailed as possible, when asking for help.
snow_man026 said:
When I received the phone cell data was working but the problem was there is no traffic when you turned on the wireless
Click to expand...
Click to collapse
Understanding that English may not be your native language. But I don't know what that means "there is no traffic". Can you try to explain another way (again, more details may help).
snow_man026 said:
But my problem now there is "no baseband"
Click to expand...
Click to collapse
Where are you seeing "no baseband". In the getvar you posted, it says baseband number 1.09.20.0119
You also did not delete the personal details (serial number, IMEI and MEID) from the getvar output, as I previously advised.
I'm so sorry for being late
I flashed the phone at the last time with this RUU
RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_Harman_6.20.654.3
This is my phone information while the phone is ON by XTC2CLIP
Reading information...
Using ADB mode...
CID list: [SPCS_004]
Main CID: [SPCS_004]
Model ID (MID): [0P6B70000]
Project: [M8_WHL_M60_SENSE70_SPCS_MR]
System version: [6.20.654.3]
Chipset: [msm8974]
Hardware: [qcom]
Serial no: [FA45PSF03010]
Release: [HTC/htc_m8whl/htc_m8whl:6.0/MRA58K/buildteam01071632:user/release-keys]
Bluetooth chipset: [Qualcomm WCN3680]
Buildline: [M8WHL_Sprint_WWE_M60_CRC_Sense70_Stable_MR2_harman]
Sense version: [7.0]
SKU: [Sprint WWE Harman]
Signed: [release-keys]
Android version: [6.0]
Android patch [2016-01-01]
Disk enecryption: [unencrypted]
Device: [htc_m8whl]
Read information completed.
and this the information while the device in the fastboot mode :
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.654.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ---------
(bootloader) imei: -----------
(bootloader) imei2: Not Support
(bootloader) meid: -----------
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B7****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Now the device state is : There is no Baseband when checked it from the system it means that there is no cell network in addition there is no imei in the normal mode
thank you very much
snow_man026 said:
I flashed the phone at the last time with this RUU
RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_Harman_6.20.654.3
Click to expand...
Click to collapse
Is that the only RUU you tried? Before you said you tried "a lot of RUU flash files kitkat or lolipop " and when asked which RUUs you tried, you list only one. So one of those statements is incorrect or incomplete.
Hard to diagnose the issue (or may give incorrect advice) is we don't know exactly, step-by-step, what you did, and the state of the device at each step.
One important example of this: Are you absolutely sure you only flashed Sprint RUUs? It's a known problem, that if you tried to flash a non-Sprint RUU or radio baseband, that it will result in a radio brick (possibly permanent, but usually can be fixed).
snow_man026 said:
Now the device state is : There is no Baseband when checked it from the system it means that there is no cell network in addition there is no imei in the normal mode
Click to expand...
Click to collapse
I am still wondering about the original state, where you said: "When I received the phone cell data was working but the problem was there is no traffic"
I asked before, what you meant by this. You still haven't explained (only given the current state).
Again, it's hard to properly troubleshoot the issue, when it's pretty clear we've only been given a portion of the info.
Thanks for keeping in touch
These are the RUU files that I had tried before
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WW
E_Harman_4.20.654.10_Radio_1.09.20.0119_NV_SPCS_1.52_003_release_418492_signed_2
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_Harman_4.20.654.10_Radio_1.09.20.0119_NV_SPCS_1.52_003_release_418492_signed_2_2
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_Harman_4.25.654.14_Radio_1.09.20.0209_NV_SPCS_1.52_003_release_426233_signed_2
According to XTC2CLIP support all of M8_WHL flash files are Sprint or sprint and harman
then I tried this file
RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_Harman_6 .20.654.3
I'm so sorry maybe I didn't explain my problem exactly when I posted it
"" I am still wondering about the original state, where you said: "When I received the phone cell data was working but the problem was there is no traffic"
I meant there was no traffic when you connected to wifi there was no data transfer and this problem was solved by flashing the latest file
Now my problem is there are no imei and baseband in the normal mode but in the fast mode are exist
Try the older RUUs, like 2.16 or 3.30, and see if that fixes the "no baseband' issue. If so, try to RUU back to a more current version (6.20) and see if the fix "sticks".
Of try to flash the firmware only, and see if that helps (not exactly the same as flashing an RUU, so be sure to read the instructions on how to flash firmware). Firmware and instructions are on the same thread as the Sprint RUUs, which I linked earlier.
redpoint73 said:
Try the older RUUs, like 2.16 or 3.30, and see if that fixes the "no baseband' issue. If so, try to RUU back to a more current version (6.20) and see if the fix "sticks".
Of try to flash the firmware only, and see if that helps (not exactly the same as flashing an RUU, so be sure to read the instructions on how to flash firmware). Firmware and instructions are on the same thread as the Sprint RUUs, which I linked earlier.
Click to expand...
Click to collapse
I know how to flash firmware thanks for help
I will inform you with the result
thanks a lot
Hey Everyone,
I'm trying to revert my M8 to stock sense. I've never S-ON'd, though my phone is all kinds of messed up.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: GLOBA001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.008s
Click to expand...
Click to collapse
I bought my phone from a Canadian provider known as Wind Mobile (now rebranded as Freedom Mobile). As you can see there's no firmware listed, and the bootloader is a strange 3.19.0.0000 which I can't seem to find anything on. The lack of firmware listing seems to be a common problem, but it leaves me with a few blanks that leave me unsure on how to proceed.
I've found threads that have RUUs for the same CID & MID, but never for the same bootloader version. I'm not really too sure how to proceed from here as I can't seem to find stock files anywhere for my provider. I'm currently using CRDroid 7.1.1.
I'd like to go back to as stock as possible and receive OTA updates. Can anyone give me some advice on what to use? I've been searching for a few hours now and can't seem to find anything for my specific phone. The one thing I did find was a European based RUU which would probably screw up my radios as I'm located in Canada.
Thank you.
Go to my backup thread linked in my signature and restore stock 6.13.1500.7 backup.
If you want the firmware to be shown on bootloader then flash fw_6.13.1500.7 firmware
How-to is explained there.
First thing .. use correct TWRP version 3.0.x not your current one which I believe is 2.7.x
ckpv5 said:
Go to my backup thread linked in my signature and restore stock 6.13.1500.7 backup.
If you want the firmware to be shown on bootloader then flash fw_6.13.1500.7 firmware
How-to is explained there.
First thing .. use correct TWRP version 3.0.x not your current one which I believe is 2.7.x
Click to expand...
Click to collapse
Thank you so much. You're the best. Got my phone running at pure stock with no issues whatsoever.
Hey guys and gals!
I have a completely stock Sprint HTC M8. Here's my dilemma. I used (unknowingly) a faulty cable to charge my phone after a full battery drain. Once I realized there was a problem with cable, I used an OE cable and fully charged the phone. As the title states, after powering the phone it bootloops until it dies. Sometimes it gets past the boot screen and I can see the phones home page for a short time (which is still the same as when I customized it when the phone was fully functional). But it inevitably bootloops.
I have tried to RUU, Flash an OTA, even hard reset and I end up with the same bootloop and the same version of the OS/ROM on the phone.
As you can see from the previous passage, I have come to a resolve regarding the loss of data on the internal sdcard. But if there is a way to preserve the data based on the information I've shared, please inform me.
For information purposes to help with this situation, here is the getvar information:
fastboot getvar all
ERROR: could not get pipe properties for endpoint 1 (e0004061)
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.654.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ______________
(bootloader) imei: _______________
(bootloader) imei2: Not Support
(bootloader) meid: _______________
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: SPCS_004
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.007s
Any help is appreciated. Thanks in advance.
StillUseMyEvo4G said:
I have tried to RUU, Flash an OTA, even hard reset and I end up with the same bootloop and the same version of the OS/ROM on the phone.
Click to expand...
Click to collapse
Which RUU? It needs to be the specific RUU (6.20.654.3) for the Sprint HK version. Any other RUU will fail by intention, and should give you an error message. If you tried an RUU, and it didn't work, we would need some specific information on what RUU, description of the error message or other failure circumstances.
Flashing an OTA won't work. You can't OTA update a phone which is already up-to-date (which your phone is). And you also can't manually flash an OTA with s-on, anyway.
StillUseMyEvo4G said:
As you can see from the previous passage, I have come to a resolve regarding the loss of data on the internal sdcard. But if there is a way to preserve the data based on the information I've shared, please inform me.
Click to expand...
Click to collapse
If you are trying to run an RUU, you are past the point of preserving your data, as RUU will wipe the phone. Or you are misunderstanding what the RUU does.
Do you have USB debugging enabled, or can boot to OS long enough to toggle it on? Does it stay powered on, in bootloader?